* fix(mtproto): split the mtg fingerprint into structural and secrets parts
A reordered clients array in the stored settings used to read as a config
change because the fingerprint concatenated secrets in array order, and one
opaque fingerprint could not tell a restart-worthy change (bind address,
fronting, throttle) from a secret-set change a reload-capable mtg can absorb
in place. Sort the secret pairs so order stops mattering, and split the value
so the upcoming hot-reload path can decide between keeping, reloading, and
restarting the process.
* fix(mtproto): stop restarting mtg on every inbound edit
Saving an mtproto inbound tore down and respawned its mtg sidecar even when
nothing material changed, dropping every live Telegram connection: the update
path pushed DelInbound+AddInbound, and Remove deletes the manager's map entry,
so Ensure's fingerprint no-op gate could never fire. Route mtproto updates
through a single Ensure call so an edit that leaves the generated TOML alone
keeps the process, and only real config changes restart it.
Capturing the pre-edit protocol also fixes a latent leak: changing an
inbound's protocol away from mtproto never stopped the sidecar, because the
snapshot handed to the runtime already carried the new protocol and the
removal took the xray branch, leaving an orphaned mtg holding the port.
An mtproto push failure no longer requests an xray restart - xray cannot fix
the sidecar, and the 10s reconcile job self-heals it.
The regression test fakes mtg by re-executing the test binary, counting
spawns through a pid file: an unchanged save and a remark-only edit must keep
the process, a re-keyed secret must restart it.
* fix(mtproto): exclude depleted clients from the reconcile job to match the sync push
The 10s reconcile job derived mtg secret sets from raw inbound settings while
the interactive push filtered clients through buildRuntimeInboundForAPI, which
drops client_traffics-disabled (depleted or expired) clients. The two paths
therefore disagreed on the fingerprint - each disagreement one needless mtg
restart dropping live connections - and worse, the job kept serving depleted
clients' secrets indefinitely, so running out of traffic never actually cut an
mtproto client's access.
DesiredMtprotoInstances now builds the job's desired state with the same
depletion overlay the push uses (one bulk client_traffics query), drops
inbounds whose every secret is filtered away so their sidecar stops, and
AddInbound pushes the filtered payload too so an imported inbound carrying
disabled stats does not seed a fingerprint the next reconcile disagrees with.
* feat(mtproto): hot-reload mtg secrets in place instead of restarting
A client add, removal, re-key, or enable-toggle changes only the [secrets]
section of the generated config, yet the panel could apply it only by killing
and respawning the mtg sidecar, dropping every Telegram connection on that
inbound. Split the ensure decision three ways: an identical config is a no-op,
a secrets-only change rewrites the TOML on the same api port and asks mtg to
hot-swap it via POST /reload, and a structural change (or a failed reload)
falls back to the full stop-and-start.
The reload endpoint is served by the mhsanaei/mtg-multi fork; against an older
binary the POST 404s and the manager restarts exactly as before, so panel and
binary upgrades stay order-independent.
* feat(mtproto): apply single-client edits to the sidecar immediately
Client CRUD on an mtproto inbound was a runtime no-op, so an add, delete,
re-key, or enable-toggle only reached mtg on the next 10s reconcile. With the
sidecar now able to hot-reload, push the change straight after the edit commits:
applyLocalMtproto rebuilds the inbound's filtered client set and re-applies it,
so a new client works within a moment (and, on a reload-capable binary, without
disturbing the others) and deleting the last client stops the process.
The three interactive single-client paths (add, update, delete) call it; bulk
operations still ride the reconcile job, which converges to the same state.
* chore(mtproto): pin mtg-multi to the mhsanaei fork v1.13.3
The reload endpoint the panel now uses lives in the mhsanaei/mtg-multi fork, so
point the source-build pin (DockerInit.sh + both release.yml matrices) at it and
bump to v1.13.3. The install still produces the same mtg-multi binary name, so
the mtg-<os>-<arch> rename and everything downstream are unchanged. Docs and the
package comment note the hot-reload path and its restart fallback.
* feat(mtproto): apply live secret updates via the management API and add ad-tag
Two capabilities the mhsanaei/mtg-multi v1.13.3 fork exposes are now surfaced by
the sidecar manager.
Live updates go through PUT /secrets on the fork's management API instead of
POST /reload: the panel already holds the whole desired set per inbound, so it
sends secrets and the advertising tag as one JSON call that mtg applies
atomically, keeping every unchanged connection and closing only removed or
re-keyed ones. The config file is still written first so a restart or crash
recovery reproduces the state, and any non-200 (an older binary, a refused
connection) still falls back to a full restart.
Per-inbound ad-tag adds an optional 32-hex Telegram advertising tag plus
public-ipv4/public-ipv6 overrides. The ad-tag rides the reloadable secrets
fingerprint, so changing it hot-applies without dropping connections; the public
IPs are proxy-construction parameters and sit in the structural fingerprint, so a
change there restarts the process. Empty public IPs are omitted so mtg
auto-detects the reachable address.
* feat(inbounds): expose the mtproto ad-tag and public IP in the inbound form
Adds an Ad-tag field (validated as 32 hex characters) plus optional Public IPv4
and Public IPv6 overrides to the MTProto inbound form, backed by the same-named
settings the sidecar writes into the mtg config. The public IPs are optional —
left blank, mtg auto-detects the reachable address the ad-tag middle proxy needs.
English strings are added to every locale; the non-English ones carry the
English text until translated and fall back to it meanwhile.
* ci(mtproto): install mtg-multi from prebuilt release binaries
The fork now publishes release archives for every platform we package, so
download and unpack the matching mtg-multi-<ver>-<os>-<arch> binary instead of
compiling it from source with go install. Faster builds and no toolchain step,
and the archive's platform labels line up with our matrix; the produced
mtg-<os>-<arch> filenames are unchanged.
* i18n(mtproto): localize the ad-tag and public IP strings
The six mtgAdTag*/mtgPublicIp* keys shipped with English text in every locale as
a placeholder. Translate them into the twelve non-English locales (Arabic,
Spanish, Persian, Indonesian, Japanese, Portuguese-BR, Russian, Turkish,
Ukrainian, Vietnamese, and Simplified/Traditional Chinese); en-US is unchanged.
* retired goreportcard.com
Deleting a client on the master propagated to nodes via the detach
endpoint, which removes the client from that one inbound's settings but
deliberately keeps the client record. The node ended up with an
orphaned record that kept showing in its Clients view; the master and
node could never converge on a delete.
Full-delete and detach intent now travel separately: the Runtime
interface gains DeleteClient, which on Remote hits the node's
panel/api/clients/del endpoint (record, attachments, traffic; repeat
calls for a client on several inbounds of the same node are swallowed
as idempotent "not found"). Delete/DeleteByEmail/BulkDelete use it for
node inbounds, while Detach/BulkDetach keep the inbound-scoped detach
RPC so removing a client from one inbound never wipes it node-wide
(the #5543 guarantee is preserved and covered by tests). Bulk deletes
above the fold threshold still converge membership via reconcile; their
leftover node records can be cleaned with the node's delete-orphans
action.
Closes#5797
A client save on the master always stamped a fresh updated_at, marked
the node dirty, and let the 5s sync push a full inbounds/update to the
node, where applying it removes and re-adds the Xray handler - killing
live traffic on every edit, including no-op saves (open the editor,
click Save). Nodes stayed online with Xray running while forwarding
nothing until a manual Xray restart.
- No-op client saves preserve the client's updated_at and return before
any DB write, runtime RPC, or node dirty mark when the effective
settings did not change.
- Successful per-client add/update/delete pushes advance the node's
reconcile-skip fingerprint only when the recorded fingerprint proves
the node held the exact pre-edit payload and every push in the edit
succeeded (Remote.AdvancePushedInbound). Anything unproven keeps the
stale fingerprint so the dirty reconcile still sends the full inbound.
Unconditional stamping would certify folded bulk changes (threshold,
flow change, offline edit) or partially failed batches as delivered:
a folded 41->6 bulk delete followed by one live edit left the node
permanently serving all 41 clients in end-to-end testing, with the
snapshot adoption then resurrecting the deleted clients on the master.
- DeleteUser treats only an envelope-level not-found as already deleted;
an HTTP 404 from an old node build without the detach endpoint
surfaces as an error instead of certifying an undelivered delete.
cacheDel drops the fingerprint alongside the id cache so DelInbound
and tag renames leave no stale skip entry.
- Adopting the node's own settings serialization into the master row now
also stamps the fingerprint (RecordAdoptedInbound). Without it the
serialization round-trip invalidated the fingerprint one sync tick
after every push, so each edit degraded back to a full teardown push.
- UpdateInboundClient applies the Shadowsocks method normalization
before the no-op comparison (real method changes bump updated_at, SS
no-op edits are detected) and syncs the generated subId into the
pushed client so the node cannot mint a different one.
Verified with a two-panel docker deployment: no-op saves produce zero
node requests, real edits send one lightweight clients/update RPC with
zero full inbound updates and zero handler teardowns, and folded bulk
deletes still converge.
Based on PR #5778 by @rqzbeh.
Closes#5764Closes#5771
WireGuard inbounds now manage per-client peers using xray-core's native WireGuard users (AddUser/RemoveUser). Each client lives in settings.clients (canonical, like every other protocol) and is projected to peers[] only when emitting the xray config, at level 0 so the dispatcher's per-user traffic/online counters work with no extra plumbing.
Backend: internal/util/wireguard gains KeyToHex (base64 to hex for the gRPC path), PublicKeyFromPrivate and GenerateWireguardPSK; xray/api.go builds a wireguard account in AddUser with hex keys (RemoveUser already worked); client CRUD generates a keypair and allocates a unique tunnel address per client and never rotates keys on edit; an idempotent migration converts legacy settings.peers into managed clients; WireGuard is included in the raw subscription.
Frontend: WireGuard in the add-client modal with keys on the credential tab, client schema, per-client QR/link/.conf, inbound form reduced to server settings; i18n added across 13 locales.
Fix: guard the settings[clients] assertion in add/update so a legacy WireGuard inbound stored without a clients key no longer panics.
The node update confirm dialog now offers a 'Dev channel (latest commit)' choice. The dev flag threads master -> nodes/updatePanel -> UpdatePanels -> remote.UpdatePanel -> the node's updatePanel endpoint, which calls StartUpdateChannel(dev) to install the rolling dev-latest build. With no dev flag the node keeps following its own channel setting.
Local hot paths:
- autoRenewClients: replace the O(clients x expired) inner scan with an
email->traffic map lookup (quadratic at scale).
- node traffic sync: scope the client_traffics email-membership query to the
snapshot's emails instead of plucking the whole table every poll.
- add a (expiry_time, reset) index for the per-tick auto-renew filter.
- SQLite: add cache_size/mmap_size/temp_store pragmas (env-tunable); keep the
single-file DELETE journal and synchronous=FULL defaults.
- scale benchmarks now run on SQLite too via XUI_SCALE_TEST=1 (shared
setupScaleDB/resetScaleTables helpers), not just Postgres.
Node paths:
- bulk add/delete/adjust on a node-attached inbound folded one HTTP RPC per
client; above nodeBulkPushThreshold (32) mark the node dirty and let one
ReconcileNode push converge it instead of O(M) sequential round-trips.
Small ops keep the live per-client path. Also hoist nodePushPlan out of the
per-email delete loop.
- ReconcileNode skips inbounds whose wire payload is unchanged (per-tag
fingerprint on Remote), guarded by node-side tag presence so a restarted
node is still re-seeded.
Tests: auto-renew multi-inbound correctness, node-path dispatch (large ops
fold to dirty, small ops push live) via a manager runtime override seam, and
reconcile delta-skip.
The central panel stores node inbounds with an n<id>- prefix so tags stay
unique in its database, but pushes were sending that prefixed tag to the
remote node. A no-op save or reconcile could rename the remote inbound and
break Xray routing rules that still referenced the original tag.
Strip only this node's prefix in wireInbound before add/update so the remote
keeps its bare tag while central retains the aliased form locally.
Signed-off-by: aleskxyz <39186039+aleskxyz@users.noreply.github.com>
Remote node HTTP responses were read with an unbounded io.ReadAll, so a
broken or hostile node could force the master panel to buffer an arbitrarily
large body. The single Remote.do choke point that all node calls funnel
through now:
- validates the HTTP status before reading any success payload (a non-OK
body is only read up to a small bounded diagnostic snippet, so a node
cannot make the master buffer a large body just to return an error);
- fast-fails on an honestly-declared oversize Content-Length;
- reads the success body through readCappedBody, an io.LimitReader cap
(64 MiB) that rejects oversize with a typed error.
The 64 MiB cap bounds one response's wire/decompressed size; it is documented
as not a process-wide memory bound (endpoint-specific caps and a concurrency
budget remain follow-ups).
Tests cover the cap+1 boundary, an oversize streamed body, a normal envelope,
and non-OK status precedence.
* fix(api-docs): document clientIpsByGuid route
Restores a green `go test ./...` baseline: TestAPIRoutesDocumented
flagged POST /panel/api/clients/clientIpsByGuid (added in 9385b6c6)
as undocumented in endpoints.ts.
* test(node): characterize current node TLS + API auth behavior
Phase 0 regression net for the mTLS work. These pass on unchanged
production code and lock the pre-mTLS contracts so later phases can be
proven additive:
- tlsConfigForNode: skip -> InsecureSkipVerify (no VerifyConnection);
pin -> VerifyConnection installed.
- checkAPIAuth: bearer match -> Next + api_authed; unauthenticated ->
401 (XHR) / 404; valid session -> Next.
- panel HTTPS listener with no ClientAuth accepts a client that presents
no client certificate (the browsers-keep-working invariant).
* feat(crypto): node-auth CA + client-cert minting (TDD)
Stdlib-only ECDSA P-256 helpers for the node mTLS work:
- GenerateNodeCA: self-signed CA (IsCA, CertSign, path len 0)
- IssueClientCert: client-auth leaf (ExtKeyUsageClientAuth) signed by CA
- LoadCAFromPEM: parse a CA cert+key for issuing / trust-pool building
Tests assert the contract (leaf verifies against the issuing CA with
ExtKeyUsageClientAuth), seen failing on the assertion before impl.
* feat(node): lazy node mTLS CA + client cert in settings (TDD)
SettingService gains opt-in mTLS material, all stored as Setting rows
with empty defaults and kept out of entity.AllSetting (so private keys
never reach the settings UI/export):
- EnsureNodeMtlsCA: mint+persist the node-auth CA once, reuse thereafter
- EnsureMasterClientCert: issue the master client cert from the CA, idempotent
- NodeMtlsClientCAPool: ClientCAs trust pool for the listener; nil when
unconfigured so the no-mTLS path is unchanged
Tests assert idempotency and that the client cert verifies against the CA
for client auth; seen failing on the assertion before impl.
* feat(node): mtls client TLS config + master-cert provider (TDD)
tlsConfigForNode gains an 'mtls' branch that presents the master client
certificate and verifies the node server against system roots (no
InsecureSkipVerify, no custom RootCAs). The cert is supplied via an
injected MasterClientCertProvider so runtime need not import service;
it fails closed when unconfigured. skip/pin contracts unchanged.
* feat(node): allow tokenless mtls nodes in remote do() (TDD)
mtls nodes authenticate with a client certificate, so the bearer token
becomes optional for them: do() no longer rejects an empty ApiToken when
TlsVerifyMode is mtls, and the Authorization header is omitted when no
token is set. Every other mode still requires a token (regression kept).
* feat(node): authenticate verified client certs in checkAPIAuth (TDD)
A completed mTLS handshake (non-empty r.TLS.VerifiedChains) now
authenticates an API request, equivalent to a valid bearer token, and
sets api_authed so the CSRF middleware lets cert-authed mutations
through. Bearer/session/reject paths unchanged. The accept-path assert
was mutation-checked (guard flipped -> test red -> reverted).
* feat(node): opt-in mTLS on the panel listener (TDD; mutation-checked)
web.go now applies VerifyClientCertIfGiven + ClientCAs to the HTTPS
listener when a node trust CA is configured, and wires the master client
cert provider for outbound mtls calls. With no CA the listener is
byte-identical to before (browsers unaffected).
applyNodeMtls is covered end-to-end: no-cert client handshakes (browsers
keep working), a CA-signed client cert verifies, a foreign-CA cert is
rejected at the handshake. Mutation-checked:
- RequireAndVerifyClientCert -> no-cert client rejected (red) -> reverted
- drop ClientCAs -> master cert no longer trusted (red) -> reverted
* feat(node): accept mtls verify-mode + CA reveal endpoint (TDD)
- model.Node.TlsVerifyMode validator now accepts 'mtls'
- normalize() preserves mtls and requires the node scheme to be https
(fail closed), instead of clamping mtls back to verify
- NodeService.NodeMtlsCaCert + POST /panel/api/nodes/mtls/ca return this
panel's node-auth CA cert (public) to paste into a node, minting the CA
+ master client cert on first call
- endpoints.ts documents the new route (doc-sync test)
No model column added (enum is a string), so no migration/codegen.
* feat(node): node mTLS UI + trust-CA setter (TDD)
Backend:
- NodeService.SetNodeMtlsTrustCA + POST /panel/api/nodes/mtls/trustCA
store the CA this panel trusts for incoming node-API client certs
(validates PEM, empty clears); applied on next restart
- endpoints.ts + regenerated openapi.json document both mtls routes
Frontend:
- node form: 'mtls' TLS-verify option + setup hint (zod enum updated)
- Nodes page 'Node mTLS' card: copy this panel's CA, and paste/save the
trusted parent CA
- en-US i18n keys (other locales fall back to en-US)
Gates green: go build (native+windows), vet, go test ./...; frontend
typecheck, lint, vitest (541).
* style(node): gofmt web_mtls_test doc comment
* feat(node): hashed+zstd reconcile transport (TDD, negotiated, mixed-version safe)
Adds an integrity + compression envelope to node config pushes:
- internal/util/wirecodec: shared zstd codec (bomb-capped decode) +
SHA-256 hashing + the header/capability constants
- Remote.do(): always attaches X-Config-Sha256 of the uncompressed body;
zstd-compresses only when the node advertised support (learned from its
X-3x-Node-Caps response header) and the body is >=1KiB
- ConfigEnvelopeMiddleware on /panel/api: advertises the cap, decompresses
and verifies the hash (handler not invoked on mismatch) before binding
Mixed-version safe: old nodes never advertise the cap -> plain bodies;
the hash header is verify-if-present so any panel/node mix interoperates
(existing reconcile tests stay green). klauspost/compress promoted to a
direct dep. Hash-mismatch reject was mutation-checked (compare defeated
-> test red -> reverted).
* feat(node): per-node network throughput metrics (TDD)
The node status response already carries gopsutil netIO.up/down (summed
non-virtual interfaces), so no node-side change is needed:
- probe() parses netIO.up/down into HeartbeatPatch.NetUp/NetDown
- Node gains net_up/net_down columns (AutoMigrate); UpdateHeartbeat
persists them and appends netUp/netDown to the per-node metric history
- NodeMetricKeys whitelists netUp/netDown so the history endpoint serves them
- NodeHistoryPanel renders Net Up/Down sparklines (KB/s, no 0-100 clamp)
- regenerated frontend types + openapi.json for the new Node fields
* feat(node): move node mTLS controls into a toolbar button + modal
The Node mTLS panel was an always-visible card cluttering the nodes
page. Replace it with a 'Node mTLS' button beside 'Add node' that opens
a modal with the same copy-CA + trusted-parent-CA controls; the modal
closes on a successful save. No backend/i18n changes.
* i18n(node): translate mTLS + net-metrics keys for all locales
Adds the node mTLS strings (tlsMtls, mtlsFormHint, mtls.* dialog + the
saveMtls toast) and the netUp/netDown chart labels to all 12 non-English
catalogs (ar, es, fa, id, ja, pt, ru, tr, uk, vi, zh-CN, zh-TW), matching
each catalog's existing terminology. Technical tokens (mTLS/TLS/CA/API/
KB/s) kept verbatim.
* fix(node): address Copilot review on node-hardening PR
- setting_mtls: fail closed on a half-present CA/master-cert pair instead of
silently regenerating (which would rotate the CA and break fleet trust).
- config_envelope: reject non-zstd Content-Encoding on the envelope path
rather than hashing/forwarding a still-encoded body to the handler.
- node mTLS: support tokenless mTLS end-to-end — apiToken is now
required_unless tlsVerifyMode=mtls (model) with matching conditional
validation in NodeFormSchema, so the runtime allowance is actually reachable.
- NodesPage: add a catch block to onSaveTrustCa so save failures surface.
Record each panel's own Xray IP observations under its panelGuid and merge each node's guid-keyed report on the master, so the panel can tell which node a client IP is connecting through (the flat inbound_client_ips union is pushed back to every node and cannot attribute). Adds the NodeClientIp model + migration, the clientIpsByGuid endpoint and node-sync merge, node-name labels in the client IP log, and cleanup on node deletion.
Deleting a client attached to a remote-node inbound could silently fail
to reach the node, so the node's next traffic snapshot resurrected the
client once the 90s delete tombstone expired.
Two paths in the single-client delete (Delete -> DelInboundClientByEmail):
- A disabled client was skipped entirely: the node-propagation and
mark-dirty block sat behind the client's enable flag (needApiDel), so a
disabled client on a node never detached and never marked the node
dirty. The bulk and multi-client delete paths already handle the node
case independently of enable state; mirror that structure here.
- Remote.DeleteUser returned nil when resolveRemoteID failed, hiding the
failure from the caller so the node was never marked dirty. Surface the
error like AddClient/UpdateUser do, so the caller marks the node dirty
and the next reconcile converges.
Add a regression test asserting a disabled node client's deletion marks
the node dirty.
The node probe honored the per-node TlsVerifyMode (skip/pin) but
runtime.Remote used a shared client with no TLSClientConfig, so traffic
sync and every other remote op fell back to system-CA verification and
failed against self-signed nodes even after the operator set skip/pin.
Move the TLS client builder into the runtime layer (HTTPClientForNode /
DecodeCertPin) as the single source of truth, have Remote build and cache
its per-node client through it, and delegate the service probe to the same
builder so the two paths can no longer diverge.
Add a subSortIndex field to inbounds that controls the order of links
in subscription output only: the raw sub body, the HTML sub page, and
the JSON/Clash formats (all served from the same query). Lower values
come first; ties keep id order. The panel inbound list is unaffected.
The value is editable in the inbound form next to the share-address
fields, propagates to nodes via wireInbound, and follows the usual
node-sync rules (copied on import, mirrored while not dirty, never a
structural change).
Rescoped from #5214 by @Ponywka.
* feat: select node inbounds for synchronization
Allow node owners to import either all remote inbounds or an explicit tag-based selection. Add remote inbound discovery, persistence, snapshot filtering, API documentation, tests, and localized UI labels.
* fix
* fix: scope node reconcile and orphan sweep to selected inbound tags
In 'selected' sync mode unselected inbounds never enter the panel DB, so
ReconcileNode treated them as undesired and deleted them from the node the
first time it went config-dirty. Reconcile now only sweeps remote tags that
are part of the selection; everything else on the node is unmanaged.
Panel-created or renamed inbounds on a selected-mode node also vanished:
their tag was outside the selection, so the next traffic pull filtered them
out of the snapshot and the orphan sweep silently dropped the central row.
AddInbound/UpdateInbound now allow the tag on the node before committing.
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
A client attached to several panels has one aggregated row on each
master, but a node only ever saw its local share: the node UI
under-reported usage, and the node kept serving a client whose
cross-panel total had already exceeded its quota — the master's disable
push doesn't kill established connections unless the node restarts xray
itself.
Masters now push their aggregated per-client counters to each node from
NodeTrafficSyncJob (throttled, scoped to the clients that node hosts).
The node stores them in the new client_global_traffics side table keyed
by (masterGuid, email), overwritten on every push so a master-side
reset propagates, and:
- overlays max(local, pushed) onto UI read paths (slim inbound list,
inbound detail, clients list, WS stats, per-email lookups). The full
/panel/api/inbounds/list stays un-overlaid on purpose: it doubles as
the traffic snapshot masters poll, and overlaying it would corrupt
every master's delta accounting;
- trips disableInvalidClients when any master's pushed total exceeds
the client's quota, so the existing RestartXrayOnClientDisable flow
disconnects the client locally;
- clears the side rows on traffic reset, auto-renew, and client
delete, keeping a renewed quota window clean.
Supersedes #5204, which folded pushed globals into client_traffics and
compensated with read-back baselines — that double-counted first-sight
emails and could not work with several masters sharing one node.
* refactor(service): split client.go into focused files
client.go had grown to 4455 lines mixing ~10 responsibilities. Split it
verbatim into cohesive same-package files (no behavior change):
client.go foundation: ClientService, ClientWithAttachments,
ClientCreatePayload, ErrClientNotInInbound, sqlInChunk
client_locks.go inbound mutation locks, delete tombstones, compactOrphans
client_lookup.go read-only lookups (GetByID, List, EffectiveFlow, ...)
client_link.go inbound association sync (SyncInbound, DetachInbound, ...)
client_crud.go single-client CRUD + validation + protocol defaults
client_inbound_apply.go low-level inbound-settings mutators + by-email setters
client_bulk.go bulk attach/detach/adjust/delete/create + DelDepleted
client_traffic.go traffic-reset paths
client_groups.go client group management
client_paging.go paged listing, filtering, sorting, summary
Every declaration moved unchanged (verified: identical func/type/const/var
signature set before vs after). Imports redistributed per file via goimports.
go build ./..., go vet, and go test ./web/service/... all pass.
* refactor(service): split inbound.go into focused files
inbound.go was 4100 lines. Split it verbatim into cohesive same-package
files (no behavior change):
inbound.go core inbound CRUD + InboundService (keeps pkg doc)
inbound_protocol.go protocol / stream capability helpers
inbound_node.go node/runtime/remote coordination + online tracking
inbound_traffic.go traffic accounting, reset, client stats
inbound_client_ips.go per-client IP tracking
inbound_clients.go client lookups within inbounds + copy-clients
inbound_disable.go auto-disable invalid inbounds/clients
inbound_migration.go DB migrations
inbound_sublink.go subscription link providers
inbound_util.go generic slice/string helpers
Identical func/type/const/var signature set before vs after; package doc
comment preserved on inbound.go. Imports redistributed via goimports.
Build, vet, and go test ./web/service/... all pass.
* refactor(service): split tgbot.go into focused files
tgbot.go was 3738 lines dominated by a 1246-line answerCallback. Split it
verbatim into cohesive same-package files (no behavior change):
tgbot.go lifecycle, bot setup, caches, small utils
tgbot_router.go incoming update / command / callback dispatch
tgbot_send.go outbound messaging primitives
tgbot_client.go client views, actions, subscription links
tgbot_inbound.go inbound listing / pickers
tgbot_report.go server usage, exhausted, online, backups, notifications
Identical func/type/const/var signature set before vs after. Imports
redistributed via goimports. Build, vet, and go test ./web/service/... pass.
* refactor(client): dedupe single-field by-email setters
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail, and
ResetClientTrafficLimitByEmail shared an identical ~50-line body that
resolves the inbound by email, confirms the client exists, rewrites a
single-client settings payload, and delegates to UpdateInboundClient.
Extract that into applyClientFieldByEmail(inboundSvc, email, mutate) and
reduce each setter to a 3-line wrapper. Behavior is unchanged: same checks
and error strings, same single-client payload contract, same totalGB guard.
SetClientTelegramUserID (resolves by traffic id, different error text) and
ToggleClientEnableByEmail/SetClientEnableByEmail (different return shape and
a pre-read of the old state) intentionally keep their own bodies.
* refactor(service): extract panel/ subpackage
Move the panel-administration leaf services out of the flat service
package into web/service/panel/ (package panel):
user.go UserService (auth / 2FA / LDAP)
panel.go PanelService (restart / self-update) + version helpers
panel_other.go non-unix RestartPanel
panel_unix.go unix RestartPanel
api_token.go ApiTokenService
websocket.go WebSocketService
panel_test.go version/shellQuote unit tests
These are leaves: they depend on core (SettingService, Release) but no
core file references them, so the extraction creates no import cycle.
Core references are now qualified (service.SettingService, service.Release);
callers in main.go, web/web.go, and web/controller/* updated to panel.*.
Build, vet, and go test ./web/... pass.
* refactor(service): extract integration/ subpackage
Move the external-provider integration leaves into web/service/integration/
(package integration):
warp.go WarpService (Cloudflare WARP)
nord.go NordService (NordVPN)
custom_geo.go CustomGeoService (custom geo asset management)
*_test.go custom_geo / panel-proxy tests
These depend on core (SettingService, ServerService, XraySettingService) but
no core file references them. xray_setting.go stays in core because it calls
the unexported SettingService.saveSetting. The shared isBlockedIP SSRF helper
(used by core url_safety.go and by custom_geo) now has a small copy in each
package rather than being exported. Core references qualified; callers in
web/web.go, web/job/*, and web/controller/* updated to integration.*.
Build, vet, and go test ./web/... pass.
* refactor(service): extract tgbot/ subpackage
Move the Telegram bot (6 files + test) into web/service/tgbot/ (package
tgbot). It is a leaf: it embeds five core services (Inbound/Client/Setting/
Server/Xray) and the core never references it, so no import cycle.
To support the package boundary without changing behavior:
- core exposes XrayProcess() *xray.Process so tgbot keeps calling the
exact same running-process methods it used via the package-level `p`;
- three core methods tgbot calls are exported: ClientService.checkIs-
EnabledByEmail -> CheckIsEnabledByEmail, InboundService.getAllEmails ->
GetAllEmails (callers updated in-package);
- tgbot's embedded-field types and the few core type refs (Status,
ClientCreatePayload, SanitizePublicHTTPURL) are now service-qualified.
Callers in main.go, web/web.go, web/job/*, and web/controller/* updated to
tgbot.*. Build, vet, and go test ./web/... pass.
* refactor(service): extract outbound/ subpackage
OutboundService (outbound.go) imports only neutral packages (config,
database, model, xray) and its production code is referenced by no core or
sibling service file — only by web/controller/xray_setting.go and
web/job/xray_traffic_job.go. Move it to web/service/outbound/ (package
outbound); no core qualification needed inside. Callers updated to outbound.*.
The one coupling was a tiny pure test helper, outboundsContainTag, used by
both outbound.go and the core outbound_subscription_test.go; it now has a
small copy in that test file rather than being shared across the boundary.
Build, vet, and go test ./web/... pass.
* refactor(util): move wireguard into its own subpackage
util/wireguard.go was the lone file of the root `util` package (24 lines,
one exported func GenerateWireguardKeypair), while every other util concern
lives in a focused subpackage (util/common, util/crypto, util/netsafe, ...).
Move it to util/wireguard/ (package wireguard) for consistency; its only
importer, web/service/integration/warp.go, is updated. The root `util`
package no longer exists.
* refactor(sub): drop redundant sub prefix from filenames
Inside package sub the subXxx.go prefix just repeats the package name
(like client_*.go did inside service). Rename for consistency; content and
type names are unchanged:
subController.go -> controller.go
subService.go -> service.go
subClashService.go -> clash_service.go
subJsonService.go -> json_service.go
(+ matching _test.go files)
* refactor(controller): rename xui.go -> spa.go
XUIController serves the panel's single-page-app shell; spa.go names that
role plainly (the other controller files are domain-named). File rename only
— the type stays XUIController. api_docs_test.go keys route base paths by
filename, so its "xui.go" case is updated to "spa.go".
* refactor: move backend packages under internal/
Adopt the idiomatic Go application layout: the backend packages now live
under internal/ (a boundary the toolchain enforces), signalling private
implementation instead of a library-style flat root. No runtime behavior
changes — only import paths and a few build/config paths move.
Moved: config, database, logger, mtproto, sub, util, web, xray -> internal/.
main.go stays at the repo root and tools/openapigen stays under tools/ (both
still import internal/* because the internal rule keys off the module root).
The module path github.com/mhsanaei/3x-ui/v3 is unchanged; 149 .go files had
their import prefix rewritten to .../internal/<pkg>.
Couplings the Go compiler can't see, updated to the new layout:
- frontend i18n imports of web/translation (react.ts, setup.components.ts)
- vite outDir + eslint/tsconfig ignore globs -> internal/web/dist
- Dockerfile COPY paths for web/dist and web/translation
- locale.go os.DirFS("web") disk fallback -> "internal/web"
- .gitignore and ci.yml go:embed stub for internal/web/dist
- api_docs_test.go repo-root relative walk (one level deeper)
- tools/openapigen filesystem package paths; ApiTokenView repointed to the
web/service/panel subpackage and codegen regenerated (clears a stale
type the ci.yml codegen check was failing on)
Verified: go build/vet/test (all packages), and frontend typecheck, lint,
vitest (478 tests), and production build into internal/web/dist.
* fix(config): keep test runs from writing logs into the source tree
GetLogFolder() returns a CWD-relative "./log" on Windows. Under `go test`
the working directory is each package's own folder, so InitLogger (called by
tests in web/job, web/service, xray, web/websocket) created stray log/
directories scattered through the source tree (e.g. internal/web/job/log/).
Redirect to a shared temp folder when testing.Testing() reports a test run.
Production behavior is unchanged: Windows still uses ./log next to the binary
and Linux /var/log/x-ui. The log files were always gitignored (*.log) and
never committed; this just stops the noise at the source.
* docs: move subscription-template guide out of root into docs/
sub_templates/ was a top-level folder holding only a README and no actual
templates (3x-ui ships none by design), referenced nowhere and unlinked from
any doc — it read like an empty placeholder cluttering the repo root.
Move the guide to docs/custom-subscription-templates.md (a proper docs home),
reword its intro to read as documentation rather than a folder note, link it
from the Features list in README.md, and drop the empty sub_templates/ folder.
* fix: update stale web/ path references after the internal/ move
The internal/ migration rewrote Go import paths but left some references to
the old top-level layout in docs, comments, and a few runtime disk paths.
Functional (dev-mode only): the disk-serving fallbacks that read the Vite
build from disk when running from source still pointed at web/dist/, which
moved to internal/web/dist/ — so `os.DirFS`/`os.Stat`/`os.ReadFile` in
internal/web/web.go and internal/sub/{sub,controller}.go are corrected.
Production was unaffected (it serves the embedded FS; verified by the Docker
build), but `go run` with a live frontend build silently fell back to embed.
Docs/comments: frontend/README.md, CONTRIBUTING.md, the claude-issue-bot and
release workflows, the openapigen -root help text, and assorted Go comments
now reference internal/web, internal/database, internal/sub, internal/xray,
etc. Package-name mentions (the "web" package), root paths (main.go,
frontend/, install scripts, /etc/x-ui), routes (/panel/api/xray), and the
historical "web/assets no longer exists" note were intentionally left as-is.
* refactor(web): remove the legacy /xui -> /panel redirect middleware
RedirectMiddleware existed only for backward compatibility with the old
`/xui` URL scheme (301-redirecting /xui and /xui/API to /panel and
/panel/api). That cutover was long ago, so drop the middleware, its
registration in initRouter, and the now-inaccurate "URL redirection"
mention in the middleware package doc. Old /xui URLs now 404 like any other
unknown path. HTTPS auto-redirect and auth redirects are unrelated and stay.
* build: fix .dockerignore for internal/ layout and exclude runtime dir
- web/dist -> internal/web/dist: the embedded frontend moved under internal/,
so the stale exclude no longer matched and the locally-built dist could be
sent to the build context (the frontend stage rebuilds it fresh anyway).
- exclude x-ui/: the local runtime directory (SQLite db, geo .dat files, xray
binaries, certs — ~150MB) was being shipped into the build context for no
reason. Verified the pattern excludes only the directory and still keeps
x-ui.sh, which the Dockerfile copies to /usr/bin/x-ui.