The panel-port prompt accepted only y/Y, so yes picked a random port; a custom port was never validated (empty, non-numeric, out-of-range, busy, or leading-zero octal), is_port_in_use never detected a listener, and the installer printed success even when applying the settings failed. Answers are now case-insensitive, custom ports are normalized and checked, the port check is fixed, and the install aborts unless the CLI reports every setting applied. A bash suite runs in shell-lint.
install.sh and update.sh stripped the leading slash and regenerated webBasePath whenever the rest was shorter than four characters, so valid short paths such as /a/ or /ab/ were replaced by a random one on every update or reinstall. Only an empty or root path is initialized now, and both scripts read one settings snapshot and leave the settings alone when that read fails or is malformed. Fixes#6961.
The local PostgreSQL setup installed whatever the distro metapackage pointed
at, so Ubuntu 22.04 got 14 (EOL Nov 2026), Debian 12 got 15 and EL9 got 13.
Servers ended up on different majors, and a pg_dump backup taken on a newer
server does not restore onto an older one.
New installs now add the official PGDG repository and install
PostgreSQL 18 (apt on Debian/Ubuntu, dnf on EL 8+ with the AppStream module
disabled, postgresql-18 service and /var/lib/pgsql/18/data). Where PGDG has
no build (Ubuntu 20.04, Debian 11, armhf/i386/s390x, EL7, Fedora, Amazon
Linux, older EL point releases) the repository change is rolled back and
the distro package is installed as before. A host that already has a
cluster keeps it, so existing installs are never upgraded.
x-ui.sh resolves the postgresql-18 unit on EL for start/stop/log and also
removes the PGDG packages on purge.
Verified in containers: Ubuntu 22.04/24.04, Debian 12, Rocky 8/9 and
AlmaLinux 10 get 18.6; Ubuntu 20.04 falls back to 12 and Debian 12 armv7 to
15 with apt-get update still clean; Ubuntu 22.04 with an existing 14 cluster
stays on 14. The CI PostgreSQL test set passes against postgres:18.
* fix(systemd): harden shipped x-ui unit files
The units ran the panel as root with no sandboxing: systemd-analyze
security rates them 9.6 UNSAFE.
Add NoNewPrivileges, ProtectSystem=full with ReadWritePaths for the
default XUI_DB_FOLDER/XUI_BIN_FOLDER/XUI_LOG_FOLDER stores, kernel and
clock protections, UMask=0077, RestrictAddressFamilies, a
CapabilityBoundingSet with NET_ADMIN/NET_BIND_SERVICE/NET_RAW and
SystemCallFilter=@system-service.
PrivateTmp is deliberately omitted: the web updater hands a path inside
the system temp directory to a systemd-run transient unit, which does not
share the service's private tmpfs. ProtectHome stays read-only because
installs keep TLS certificates under the root home directory.
Fixes#6605
* fix(systemd): ship ReadWriteDirectories= alias for systemd < 231
ReadWritePaths= only exists since systemd 231; install.sh still supports
CentOS 7 (systemd 219), where the directive is ignored and ProtectSystem=full
would leave the panel state directory read-only, breaking its database.
* fix(systemd): keep root's DAC bits and regenerate the write paths
Two follow-ups to the hardening, both reported by review on #6718.
CAP_DAC_OVERRIDE and CAP_DAC_READ_SEARCH were dropped from the bounding set.
Root holds them normally, and a bounding set is subtracted from root too: the
panel could no longer read a private key it does not own (a Caddy-issued
certificate under its own state dir, an acme.sh home, any 0600 file owned by
another account). That fails quietly for TLS -- the panel listener logs the
tls.LoadX509KeyPair error and keeps serving plain HTTP, and Xray inbounds using
that key stop -- so both bits stay.
ProtectSystem=full plus a hard-coded ReadWritePaths list broke installs whose
XUI_DB_FOLDER/XUI_LOG_FOLDER/XUI_BIN_FOLDER live outside the defaults, and the
workaround of editing the unit did not survive an update, because install.sh and
update.sh reinstall the unit from the release tarball. The folders actually in
use are now resolved from the same env file the unit passes to the panel and
regenerated into x-ui.service.d/10-xui-write-paths.conf on every install and
update, so a relocated store stays writable and the list is not reset. The unit
keeps the plain-install defaults plus XUI_SERVICE, which the in-panel updater
needs when systemd-run is unavailable and it falls back to a child process that
inherits this sandbox while update.sh lands the unit again. Uninstall removes
the drop-in with the unit.
* fix(systemd): keep the seccomp whitelist off old systemd, tighten the rest
Review of the previous head found that SystemCallFilter=@system-service plus
SystemCallErrorNumber=EPERM is a hard regression on the platforms this PR means
to keep working. @-named filter groups exist from systemd 239 on, and older
systemd does not ignore an unknown group name: on <231 the name fails to resolve
and the filter stays the built-in whitelist of execve/exit/exit_group/
rt_sigreturn/sigreturn, on 231..238 it degrades to @default. Either way the panel
then gets EPERM on read/openat/mmap/clone and cannot start -- a CentOS 7 or
Ubuntu 18.04 install would come up dead after this update. The two directives now
live in the generated drop-in and are written only when "systemctl --version"
reports 239 or newer, so old hosts keep the rest of the hardening and simply go
without seccomp.
The same review listed three more items, all addressed here:
- a comment claiming ProtectSystem=full "keeps everything outside /var, /run and
the listed ReadWritePaths read-only" -- that is `strict`; `full` locks down
/usr, /boot, /efi and /etc;
- /etc/systemd/system was granted writable for the in-panel updater's fallback,
but that fallback cannot work under this sandbox at all: update.sh also stages
the release archive beside the main folder, replaces /usr/bin/x-ui and calls
the package manager. The entry is gone and update.sh now stops up front with
one clear message when the directories it needs are read-only, instead of
failing halfway with "Failed to download x-ui";
- CAP_DAC_READ_SEARCH is redundant next to CAP_DAC_OVERRIDE, so the bounding set
keeps just the latter.
Relocating a store by editing the env file alone is documented in the unit and
in the generated drop-in: the drop-in is only written by install/update, so one
of those has to be re-run afterwards.
Verified with a local harness (9 checks: plain defaults, relocated store read
from the env file, the same list produced by update.sh, duplicate collapse,
seccomp present at systemd 249 and absent at 238, read-only guard) and bash -n
on install.sh, update.sh, x-ui.sh. systemd-analyze is not available here, so the
unit files themselves are unverified by a parser.
* fix(systemd): actually wire the read-only guard, drop the superseded drop-in
Re-review of the previous head caught two leftovers from that commit:
- require_writable_update_paths was defined but never called, so the guard the
unit comments, the commit message and the PR comment promise did not exist at
all. It is now called at the top level, before install_base, i.e. before
anything with a side effect: a sandboxed fallback run stops with one clear
message instead of failing halfway, which on a relocated main folder meant the
old install removed and the service folder rewritten before dying on /usr/bin.
- the drop-in this branch replaced (10-xui-write-paths.conf) is no longer written
or referenced, but nothing removed it either. Whoever installed the build that
wrote it keeps its wider list, including the writable service folder, until it
is deleted by hand. Both generators now remove it.
Harness extended to 11 checks: the superseded file is gone after a run, the guard
is actually called, plus the previous nine (defaults, env-file relocation, same
list from update.sh, dedupe, seccomp at 249 / absent at 238, read-only guard) and
bash -n on the three scripts.
* fix(systemd): correct two comments and keep spaces out of the path list
Second-opinion review of the previous head (two models, both asked to state
platforms and versions) produced three actionable items: a wrong comment kept
from the earlier commits, a wrong generalisation about the filter groups, and a
path-list case that would leave the panel unable to start.
- the ProtectSystem= comment claimed strict leaves /var and /run writable. It
does not: strict mounts the whole hierarchy read-only and only the kernel API
filesystems stay as they are. The sentence was already wrong before this
branch and moving it to ProtectSystem=full did not fix it.
- "the @-named filter groups need systemd >= 239" is the wrong generalisation:
named groups exist since 231, it is @system-service that arrived in 239. The
unit files, both script comments and the drop-in body now name the group.
- a folder containing whitespace (XUI_DB_FOLDER="/srv/panel data") was written
into ReadWritePaths= verbatim. That directive is a whitespace-separated list,
so the entry splits into "-/srv/panel" and "data", and systemd rejects the
whole drop-in: the panel then does not start at all. Such folders are left
out and reported to the operator instead; the other paths are still written.
Harness extended with three checks for the whitespace case (folder left out,
remaining paths intact, warning emitted) and the duplicate-store case now reads
its own env file instead of the previous one, so it tests what it claims.
14 checks plus bash -n on the three scripts, all passing.
* fix(systemd): act on the independent review of the drop-in generator
A read-only review of the branch head (another model, given the diff and the
sources, asked to cite only verified lines) confirmed the earlier work and
turned up four items that are fixed here:
- a folder name carrying a literal % went into ReadWritePaths= as it was, and
systemd expands %-specifiers in unit files: with XUI_DB_FOLDER=/srv/x%-ui the
entry no longer named the directory the panel writes to and the panel could
not write its database. The path is now emitted as %%; the duplicate check
keeps comparing the unescaped value.
- systemd older than 229/242/244 does not know NoNewPrivileges, ProtectClock,
ProtectHostname and ProtectKernelLogs. It logs them and carries on, so
CentOS 7 (systemd 219, which install.sh explicitly supports) runs with less
hardening than the unit lists. install.sh and update.sh now print which
protections need a newer systemd, which ones still apply, and that upgrading
systemd is what changes it.
- the updater's writability guard asked [[ -w ]] about the parent directories.
It creates and removes a probe file instead, so an immutable attribute or a
full filesystem is caught as well (a read-only mount was already caught).
- the generator's comment claimed to resolve the folders the service actually
uses, while the shipped unit hard-codes WorkingDirectory= and ExecStart= under
/usr/local/x-ui. The comment now states what XUI_MAIN_FOLDER really feeds --
the location install.sh/update.sh install into and the base for a relative
XUI_BIN_FOLDER -- and that a relocated main folder needs the unit edited too.
Rejected from the same review, with the evidence: that [[ -w ]] cannot see a
read-only mount (access(W_OK)/faccessat consults __mnt_is_readonly before the
mode bits), and that the /etc ReadWritePaths entry is an exception granted for
/etc rather than a default store already in the list.
Harness extended: 19 checks (escaped %, the old-systemd note, whitespace and
duplicate folders, seccomp gating, the read-only guard) plus bash -n on the
three scripts, all passing.
* fix(systemd): name the hardening old systemd really ignores
The old-systemd note fired only below 239 and listed wrong versions:
RHEL 8 (239) and Debian 10 (241) silently lose ProtectHostname and
RestrictSUIDSGID (242), ProtectKernelLogs (244) and ProtectClock (245)
with no note, while CentOS 7 was told NoNewPrivileges (187) and
ProtectHome=read-only (214) were not applied although both are. The
note is now built from a directive/version table taken from
systemd.exec(5) and lists only what the running systemd lacks.
Also drop the removal of 10-xui-write-paths.conf: only an intermediate
commit of this branch wrote that file, no release ever shipped it.
---------
Co-authored-by: Кот <kot@zeroclaw.local>
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
* feat(tuic): implement native in-process Go TUIC v5 server
- Implement native TUIC v5 protocol server on pure Go using quic-go
- Bridge decrypted TCP/UDP traffic into Xray-core via loopback SOCKS5 inbound
- Support full Xray routing rules (geosite/geoip) and cascading outbounds
- Implement atomic per-client traffic accounting with TotalGB and ExpiryTime
- Add automatic legacy cleanup for older Rust tuic-server binaries, configs, and orphaned processes
- Eliminate external Rust tuic-server downloads from install/CI scripts
* fix(tuic): address traffic accounting, client reload, and socket lifecycle issues
* fix(service): update checkTuicSocksReverseConflict to use bindAddr for listenOverlaps
* fix(tuic): resolve traffic double-accounting, UDP fragmentation, and socket lifecycle issues
* feat(tuic): complete native Go integration and address audit findings
- Integrate an isolated QUIC fork pinned to a specific commit
- Preserve original QUIC dependencies for Xray, Hysteria and Gin
- Apply BBR, CUBIC and Reno to server connections and exported client profiles
- Bridge Xray BBR with correct monotonic time and congestion type conversions
- Handle congestion sender recreation after PMTU changes
- Update congestion control for new connections without restarting the listener
- Preserve existing connections and their selected congestion controller
- Apply per-inbound log levels through the shared panel logger
- Add lifecycle, authentication and TCP/UDP relay events without exposing secrets
- Rate-limit repeated authentication and relay warnings
- Support native and QUIC UDP relay modes on the same listener
- Recover UDP associations after relay worker failures
- Fix TCP relay cancellation, idle shutdown and half-close handling
- Close active sessions when client credentials are revoked or disabled
- Track traffic by immutable client statistics IDs across email and UUID changes
- Prevent ambiguous accounting and duplicate UUIDs within TUIC inbounds
- Persist pending traffic in a durable shutdown journal
- Replay journal batches transactionally without duplicate accounting
- Report server shutdown failures through the shared logger
- Preserve legacy flat and nested TUIC settings compatibility
- Normalize congestion controller values consistently across backend and frontend
- Preserve controller, UDP mode and SNI in client links and subscriptions
- Separate client profile options from server settings in the TUIC form
- Keep certificate path autofill explicit when changing client SNI
- Align UDP packet size validation with protocol limits
- Simplify and localize TUIC field hints and certificate autofill messages
- Add controller, TCP/UDP, logging and live settings update tests
- Add accounting identity, journal replay and shutdown regression tests
- Add relay recovery, session revocation and legacy frontend form tests
* fix(service): alias the TUIC duplicate-UUID subquery for PostgreSQL < 16
syncInboundClients runs a COUNT(*) FROM (subquery) for every client sync,
whatever the protocol. PostgreSQL before 16 rejects a FROM subquery with
no alias, so on the distro PostgreSQL install.sh provisions (14 on Ubuntu
22.04, 15 on Debian 12) every client add or edit failed with SQLSTATE
42601. Reproduced against postgres:15 with the new env-gated test.
* fix(database): create tuic_traffic_receipts through the model migration
AddTuicTrafficBatch issued CREATE TABLE IF NOT EXISTS at runtime, a schema
change outside db.go. The table was invisible to allModels and
migrationModels, so x-ui migrate-db dropped the receipts and a retained
journal could be counted twice after a SQLite to PostgreSQL move. It is
now a GORM model in both lists, and the insert uses OnConflict DoNothing.
* chore(tuic): skip the ICMP-dependent relay test on Windows, drop dead collectors
Go disables SIO_UDP_CONNRESET on Windows, so a dead UDP bridge never fails
a read there and TestAudit3UDPAssociationMustRecoverAfterBridgeReadFailure
was red on every Windows run. Server.CollectTotalTraffic and
Manager.CollectTraffic had no caller.
* refactor(tuic): serve TUIC on apernet/quic-go instead of a personal fork
The native server depended on github.com/poise52/quic-go, a personal fork
of apernet/quic-go patched only to pick the congestion controller before
the handshake. That put a second QUIC/TLS stack in the binary that no
upstream security fix reaches. apernet/quic-go is already in the graph
through xray-core and exposes SetCongestionControl, so BBR is now installed
on each accepted connection with Xray's own congestion.UseBBR; the
cross-module BBR adapter is gone.
apernet ships New Reno as its only built-in sender, so a cubic setting is
served as new_reno server-side (clients still get cubic in their profile).
The test inspectors now read the sender under congestionMutex, which the
post-handshake install writes under.
Linux loopback, single stream through Xray: 2428 -> 3383 Mbit/s (bbr).
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
install_tuic_server copied the downloaded sidecar onto
/usr/local/bin/tuic-server with cp -f, replacing an operator's own
tuic-server install. The panel resolves bin/tuic-server first
(GetBinaryPath in internal/tuic/process.go) and never reads that copy, so
the copy could only ever clobber a foreign binary.
* Feat(tuic): Implement native TUIC v5 protocol support via Rust sidecar daemon
- Add internal/tuic package for official tuic-server sidecar lifecycle management, configuration generation, and graceful process control
- Bridge decrypted TUIC QUIC traffic into loopback Xray SOCKS5 inbounds (63200+id) for traffic accounting, statistics, and routing rules
- Implement periodic reconciliation job (cadence @every 10s) and immediate runtime synchronization on inbound/client mutations
- Add TUIC inbound & multi-user client settings (UUID + Password authentication) in Web UI with SNI auto-fill and panel certificate loader
- Integrate tuic:// subscription links and Clash.Meta (Mihomo) proxy generation for TUIC
- Update install.sh to automatically download and install official tuic-server release for x86_64, aarch64, and armv7
- Add full localization for TUIC protocol across all 13 supported languages
* Feat(install): Support custom repository and branch in install and update scripts
* Ci(release): Enable publish-dev for feature branch and workflow dispatch
* Feat(sub): Add TUIC to subscription resolution and client QR config generator
- Add 'tuic' to getInboundsBySubId SQL allowlist to resolve TUIC inbounds in subscriptions and sub links
- Enhance buildTuicProxy in Clash subscription generator with robust host and credentials resolution
- Add tuicConfig.ts to generate standalone Clash/Mihomo YAML configuration
- Add dedicated TUIC Config tab in ClientQrModal with QR code and .yaml download button
- Add localization keys for TUIC config across all 13 supported languages
* Fix(tuic): Exclude TUIC from native Xray inbounds and strip udp_relay_mode from server config
- Exclude model.TUIC from native Xray inbounds in GetXrayConfig to prevent Xray startup failure
- Remove udp_relay_mode from tuic-server JSON configuration builder
- Update install.sh to install tuic-server binary to both xui_folder/bin and /usr/local/bin
* Fix(install): Fallback to dev-latest when releases/latest is not present on fork
* Feat(tuic): Add real-time online status and LastOnline tracking for TUIC clients
- Track client activity by mapping client UUID in tuic-server logs to email
- Integrate TUIC active clients into XrayTrafficJob to refresh local online clients
- Bump LastOnline timestamp in database and broadcast live online status over WebSocket
* Feat(tuic): Implement real-time traffic statistics and live speed reporting for TUIC
- Collect precise I/O traffic deltas for tuic-server child processes via /proc/<pid>/io
- Aggregate and attribute TUIC traffic deltas per client in tuic Manager
- Integrate TUIC traffic deltas into XrayTrafficJob to update database and broadcast live speed
* Feat(tuic): Finalize TUIC v5 integration with 1:1 traffic counting and orphan process cleanup
- Use exact 1:1 byte delta accounting from /proc/<pid>/io
- Add killStrayTuicProcesses to terminate orphan sidecars on panel startup
- Fully integrate TUIC with subscriptions, live speed meter, and all 13 locales
* Feat(frontend): Polish TUIC UI, support bulk operations, and update translations
- Align TUIC inbound certificate form with standard 3X-UI layout (Set Default Cert, Clear)
- Remove extra subtitle hint text from TUIC inbound form fields
- Support TUIC in client bulk attach/detach and bulk add modals
- Add TUIC badge color to client info modal, clients table, and host list
- Update password tooltip across all 13 locales to include TUIC
- Remove obsolete dead translation keys across all 13 locales
* Chore(ci): Finalize TUIC v5 bundling across release workflow, Docker, and scripts
* Feat(openapi): Update OpenAPI generator and schemas for TUIC types
* Fix(backend): Address core review findings for TUIC types, port checks, and xray bridge
* Refactor(traffic): Isolate proc reading with build tags and decouple TUIC metering into TuicJob
* Feat(client): Add TuicServer to InboundOption, fix config export and clean share links
* Fix(frontend): Register TUIC in multi-user helpers, tracked protocols, and tag derivation
* Chore(openapi): Re-generate OpenAPI specification and sync Zod schemas
* Chore(scripts): Add Alpine musl binaries, 386 and Windows packaging, and anchor pkill
* Fix(review): Remove stale import, correct binary names, switch to musl, and drop unreachable relay gate
* Feat(frontend): Show share link in Inbound Info and display UDP tag for TUIC
* Docs: Add TUIC v5 configuration guide and link specifications
* Docs(tuic): Correct Clash Meta configuration parameter to reduce-rtt
* Fix(tuic): Generate client credentials on copy, enforce ID/password validation, and add i386 to DockerInit
* Fix(tuic): drop unused relay, fix traffic accounting, and honor host endpoints
- Drop unused loopback SOCKS relay and eliminate port collision with AmneziaWG
- Correct inbound traffic calculation without double-counting
- Drop heuristic client traffic division while retaining online tracking
- Support externalProxy host fan-out and conditional parameters in share links
- Scope orphan process termination to managed config directory
* Fix(tuic): enforce client quotas, decouple Xray restart, and sync openapi schemas
- Regenerate OpenAPI, Zod schemas, and TypeScript types without route_through_xray
- Populate clientTraffics in TuicJob to enforce client quotas and first-use expiry
- Split process I/O delta into up and down in Process.CollectTraffic
- Remove SetNeedRestart from updateTuicInbound to prevent Xray session drops
- Use InstanceFromInbound for default ALPN and UDP relay mode in tuic:// share links
- Support allow_insecure on externalProxy host endpoints without parameter collision
* Fix(tuic): attribute client traffic only on single-user inbounds and sync link defaults
- Attribute I/O deltas to the client only when the inbound has exactly one configured client, avoiding false billing and disablings on multi-user inbounds
- Aggregate client traffic by email in TuicJob so clients on multiple inbounds don't lose deltas
- Match frontend genTuicLink defaults for alpn and udp_relay_mode with backend subscription links
* Fix(tuic): gate client traffic by total sidecar clients and require client email
* Fix(tuic): enforce inbound-only traffic limits and disable client totalGB
* fix(tuic): restore delayed start, remove client totalGB rejection, and document linux-only limits
* fix(tuic): anchor pkill, fix io baseline/split, escape yaml, and deduplicate start errors
* fix(tuic): prevent traffic double-counting, ensure info log level for delayed start, and broaden pkill matching
* fix(tuic): address review round 11 findings
- internal/sub/json_service: skip tuic protocol in json subscription to prevent direct routing leak
- internal/sub/clash_service: honor externalProxy/host row allowInsecure, sni, and alpn in buildTuicProxy
- internal/web/runtime: decouple tuic inbound add/delete from xray restart
- internal/tuic/config: restore user log-level options (warn, error) without forced info clamp
- frontend/src/lib/xray/inbound-link: fix duplicate remark suffix and apply externalProxy TLS overrides
- frontend/src/schemas/protocols/stream/external-proxy: propagate allowInsecure through host mapping
- tests: add coverage for json sub skip, clash proxy overrides, and link generation
* fix(tuic): meter inbound traffic through a UDP relay and bracket IPv6 binds
Review repairs on the TUIC v5 sidecar integration:
- Inbound traffic was read from the sidecar's /proc/<pid>/io rchar, but
the kernel only counts read()/write() there and tuic-server moves its
sockets with recvfrom/recvmmsg/sendmmsg/sendto, so an inbound's up/down
stayed at 0 forever and inbound total limits never tripped (measured:
12 MiB relayed, rchar delta 0). The panel now owns the inbound's public
UDP port with a small relay and runs tuic-server behind it on a loopback
port, counting up/down exactly on every OS. tuic-server therefore logs
127.0.0.1 as every client's address; per-client attribution stays
unsupported since QUIC is opaque.
- Instance.BindTo formatted an IPv6 listen address as ":::8443", which
tuic-server rejects with "invalid socket address syntax", so an inbound
listening on "::" or any IPv6 literal never started. It now uses
net.JoinHostPort; IPv4 output is unchanged.
- The log level is passed to the sidecar as chosen. Online status,
last-online and delayed start are read from its Info lines, so the Log
Level field now says that Warn and Error switch them off for the
inbound, and the docs say the same.
- Drop two frontend tests that only exercised a getter and a set lookup,
and strip the trailing blank line that made gofumpt fail on two of the
new Go test files.
* fix(tuic): harden tag updates, runtime routing, and relay stability
---------
Co-authored-by: poise52 <equipoise52@gmail.com>
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
* fix(cli): let -getApiToken name the token it regenerates
The flag's help text said "Display current API token". It cannot display
anything -- tokens are stored as SHA-256 hashes, and the command's own first
two output lines say so. What it does is destroy and reissue a credential:
GetApiToken calls RecreateByName on the hardcoded name "cli-fallback". The
help therefore invited an operator to run a command they believed was
read-only, and it revoked a token someone else was holding.
Because that name is a single global slot, two callers silently invalidate
each other, and the loser is left with a token that answers HTTP 404 with an
empty body -- indistinguishable from a wrong base path, so the failure does
not even say what happened. install.sh is one of those callers, at lines 1231
and 1325, so the collision already exists inside this repository.
Add -tokenName, defaulting to cli-fallback so install.sh and every existing
invocation behave exactly as before. -getApiToken stays a boolean on purpose:
install.sh calls it as `x-ui setting -getApiToken true`, and a string flag
would swallow that trailing argument and mint a token named "true".
The name now reaches both branches of GetApiToken. On a database with no
tokens the command used to create one called "install", which the CLI could
then never rotate -- defeating the stated purpose of the cli-fallback constant,
that -getApiToken cannot accumulate admin-equivalent credentials it never
revokes. Both branches use the resolved name, so repeated calls rotate a
single slot instead of leaving a permanent token behind.
Also cap the name at 64 characters in RecreateByName. Create already enforces
that limit on the same column; RecreateByName did not, and it now receives
operator input.
Assisted-by: Claude Code:claude-opus-5 (mostly)
* fix(cli): keep the installer's token out of the rotated slot
Folding both branches of GetApiToken onto one name made the bug worse in the
exact case this change is about. install.sh records the token it gets on a
fresh panel; with both branches on cli-fallback, the next bare -getApiToken
rotated that very row and silently invalidated the credential written into the
install-result file.
Restore the split default -- "install" when the database has no tokens,
cli-fallback when it does -- so nothing about an unnamed call changes. An
explicit -tokenName still applies to both branches, which is what keeps the
flag coherent: -tokenName ci-bot now yields ci-bot on a fresh panel too,
rather than "install".
Pin it with a test that reads the install row's id and hash before and after a
rotation, since a name-only assertion would pass against a deleted-and-
recreated row.
* fix(cli): stop the `-getApiToken true` form from swallowing -tokenName
Three corrections from review.
Go's flag package stops parsing at the first non-flag argument, so the trailing
`true` in install.sh's invocation does not merely get ignored -- it terminates
parsing. An operator copying that documented shape and writing
`x-ui setting -getApiToken true -tokenName ci-bot` left tokenName empty, so the
command rotated cli-fallback: the shared-slot collision this change exists to
remove, reachable through the one form the repository itself demonstrates.
Verified against the built binary, which printed
`The API token "cli-fallback" has been regenerated`.
Drop the stray `true` from both install.sh call sites so the documented form no
longer teaches the trap, and warn whenever `setting` is given positional
arguments, naming what was ignored. A warning rather than an error, because an
older install.sh in the wild still passes `true` and must keep working.
Cover both branches in the help strings. They described only the rotation path,
so on a fresh panel -h announced cli-fallback while the command actually mints
`install`, and nothing is regenerated or invalidated there at all -- misleading
help being the defect this change set out to remove.
Assert the concrete error in the name-length test. It checked only that some
error came back, which RecreateByName's empty-name guard and its transaction
errors would satisfy just as well.
* feat(release): publish SHA-256 sums and verify them in install.sh/update.sh
The installer and updater fetched the release archive and extracted it
after checking only that the file is not empty, and the release workflow
published no checksums. TLS protects the transport, not the bytes: a
truncated or swapped asset, a bad mirror or a TLS-terminating proxy was
installed as root. #5396 added this verification for the Xray archive;
the panel's own archive was the remaining unverified download.
Publish <asset>.sha256 next to every release archive (Linux and Windows)
and verify it before extracting. A mismatch aborts the install; a missing
sidecar, which every release before this change has, only warns, so
installing older tags keeps working.
Assisted-by: Claude Code:claude-fable-5-1
* fix(install): fail closed when the checksum sidecar cannot be fetched
Review follow-up. Any curl failure on the sidecar (5xx, reset, DNS) was
treated as "no checksum published", so whoever can swap the archive
could also drop the 90-byte sidecar request and skip the check. Only a
404, which every release before the sidecar existed returns, is still
tolerated with a warning; every other outcome aborts and removes the
downloaded archive.
Assisted-by: Claude Code:claude-fable-5-1
* fix(install): restore the closing brace lost in the main merge
* fix(install): fetch x-ui.sh and unit files from the installed release tag
install.sh and update.sh pin the panel archive to a release tag but always
took x-ui.sh, x-ui.rc and the service units from main, so the management
script and the binary of one installation came from different commits:
the fail2ban templates and setting flags the script writes drift silently
against an older binary, two installs of the same tag differ, and a
reviewed or digest-pinned installer still runs unreviewed code from main.
Use the same ref as the archive, keeping main only for the rolling
dev-latest build. The menu's "update menu" and update_shell paths now
fetch the script matching the installed version and fall back to main
with a visible notice when no script is published for it.
Assisted-by: Claude Code:claude-fable-5-1
* fix(install): fall back to main for files a pinned tag does not publish
Review follow-ups. install.sh accepts tags down to v2.3.5, but x-ui.rc
only exists from v2.8.4 and the split x-ui.service.* files are newer
still, so pinning those to the tag made an Alpine install of an old tag
404 after the previous install was already removed. Probe the tag for
each file and fall back to main with a notice when it is missing, as
the menu already does for x-ui.sh.
The fail2ban auto-setup probe also trusted the exit status of
'x-ui setup-fail2ban', but scripts before v3.4.0 have no such
subcommand and exit 0 from the usage banner, so the installer reported
a setup that never ran. Skip with a notice when the installed script
does not know the subcommand.
Assisted-by: Claude Code:claude-fable-5-1
* fix(install): refuse a tag that does not publish a needed script
Falling back to main reintroduced the binary/script mismatch the tag
pinning exists to remove, and it fired at points where install.sh and
update.sh have already stopped and removed the previous installation --
so the quiet path was also the one that could not be undone.
Probe the tag instead, before anything is touched, for every file that is
always fetched from GitHub (x-ui.sh, plus x-ui.rc on Alpine), and abort
with the HTTP status when one is missing. The unit files stay unprobed:
they are only fetched when the release tarball omits them, so an old tag
that ships x-ui.service inside its tarball still installs. Their existing
failure message now names the ref it tried.
Also tighten the setup-fail2ban probe to the dispatcher's case arm rather
than any mention of the string, which also matches a comment.
---------
Co-authored-by: Claude <noreply@anthropic.com>
* fix(database): keep the SQLite store owner-only
InitDB created the data directory 0755 and let SQLite create x-ui.db
and its -wal/-shm side files under the default umask, so on a stock
install they are world-readable. The store holds client UUIDs, Reality
private keys and the admin password hash, so any local account could
read them.
Create the directory 0700 and chmod the database files to 0600 right
after opening. SQLite gives -wal/-shm the mode of the main file, so
files created later inherit it; existing installs are tightened on the
next start. PostgreSQL deployments are untouched.
Assisted-by: Claude Code:claude-fable-5-1
* fix(database): tolerate chmod failures, keep the dump and install dir owner-only
Review follow-ups. A store the panel cannot chmod (root_squash NFS, a
foreign uid in a container) refused to start, which is worse than the
0644 it had before; log and continue instead, as the backup-directory
cleanup above already does. install.sh reset /etc/x-ui to 0755 right
after the binary created it 0700, so the directory hunk was inert on
real installs; create it 0700 there too. The migrate-db dump in the same
directory is a plaintext copy of the same secrets and was written 0644.
Assisted-by: Claude Code:claude-fable-5-1
* feat(amneziawg): add native AmneziaWG protocol backend
AmneziaWG (WireGuard plus DPI-resistant obfuscation) needs no Docker
here — it runs as a genuine kernel interface via awg-quick/awg, managed
the same way internal/mtproto manages mtg: one Inbound row is one
desired Instance, and a Manager reconciles running interfaces toward
the database every 10s (internal/web/job/amneziawg_job.go) plus
immediately after a client edit (applyLocalAmneziaWG).
Clients reuse model.Client verbatim (the same PrivateKey/PublicKey/
PreSharedKey/AllowedIPs fields WireGuard already uses), so bulk
operations, the QR/share-link modal and subscriptions come from the
shared inbound infrastructure instead of a parallel implementation.
internal/amneziawg owns the obfuscation param generator/validator
(ported from coinman-dev/3ax-ui, upgraded to AmneziaWG 2.0's S3/S4
padding and I1 signature packet) and the exec wrapper around
awg-quick/awg, with fingerprint-based reconcile (noop / reload-via-
syncconf / full restart) mirroring mtproto.Manager so a same-protocol
edit doesn't force an unnecessary interface bounce that would drop
every peer's connection.
Frontend and install.sh's DKMS/awg-tools setup are tracked separately;
this is backend-only.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): add frontend support and fix a Go->Zod generator gap
Wires the amneziawg protocol through the panel UI the same way every
other protocol is registered: a Zod settings schema (nested
{server, clients}, matching the Go JSON exactly), the protocol enum,
the inbound-form's per-protocol fields component and its
tab-visibility allowlist, the default-settings factory, the client
schema dispatcher, and the sniffing-capability exclusion (no Xray
inbound exists for amneziawg, same as mtproto).
Client key/allowedIPs fields are reused rather than duplicated: since
AmneziaWG clients are wire-identical to WireGuard clients (same
model.Client fields), ClientFormModal renders one shared field block
for both, switching only the visible label by which protocol is
active. The private-key input also gets a live public-key sync via a
new useEffect, because unlike WireGuard's Xray-native inbound (which
re-derives its public key at runtime and never stores one),
AmneziaWG's server.publicKey is a real persisted field the Go backend
reads directly — free-typing a new private key without this would
silently save a mismatched keypair.
Adds a downloadable per-client .conf (amneziawgConfig.ts, mirroring
wireguardConfig.ts) with the obfuscation lines, and an
InboundOption.AwgServer field on the Go side so the config builder
gets the full server block in one round trip.
Along the way, running tools/openapigen surfaced a real bug: it
doesn't flatten anonymously-embedded Go structs the way encoding/json
does, so ServerSettings embedding Obfuscation20 produced a Zod schema
with a nested `obfuscation20` key that never matches the real wire
JSON. Fixed by un-embedding (flat fields + an accessor method) and
registering internal/amneziawg in the generator's own package list,
which had been silently emitting a dangling schema reference.
English and Russian translations are complete; the other 10 locale
files still fall back to English for the new keys.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): complete frontend parity for the Inbounds list page
The Clients page (form, CRUD, QR/config) already worked from the
prior commit; this closes the remaining gap on the Inbounds side and
in a couple of protocol allowlists that a plain search for existing
wireguard/mtproto handling turned up.
lib/xray/inbound-link.ts gets amneziawg-specific link/config builders
(genAmneziaWGLink/genAmneziaWGConfig, plus the *s fan-out variants)
mirroring the wireguard ones — AmneziaWG has no legacy peers-array to
fall back to, so these read settings.clients directly and add the
obfuscation lines every client must share with the server. Wired into
genInboundLinks generically, and into three consumers that call the
wireguard builders directly rather than through that dispatcher:
QrCodeModal, InboundInfoModal, and InboundsPage's bulk export.
ClientInfoModal, ClientBulkAddModal, and the bulk attach/detach modals
each had their own protocol allowlist that needed amneziawg added
alongside wireguard/mtproto.
Two real gaps surfaced by grepping every remaining 'wireguard' /
Protocols.WIREGUARD hit in frontend/src rather than trusting the
checklist was exhaustive:
- useInbounds.ts's TRACKED_PROTOCOLS gates the deactive/depleted/
expiring/online client counts shown per inbound on the list page;
without amneziawg those counts would silently read zero.
- inbound-tag.ts is an explicit client-side mirror of the Go backend's
port_conflict.go (the file says so itself: "Keep in sync"). It still
only special-cased wireguard for UDP, so an amneziawg inbound would
have fallen through to the TCP default and disagreed with the
backend's own port-conflict math.
Also finishes translating the AmneziaWG UI strings into the 11 locale
files that were still falling back to English (ar-EG, es-ES, fa-IR,
id-ID, ja-JP, pt-BR, tr-TR, uk-UA, vi-VN, zh-CN, zh-TW), matching
en-US/ru-RU key-for-key (26 new keys, verified by count in every file).
Not run anywhere: npm run typecheck / build. This machine has neither
Node nor npm, so nothing here has compiled — reviewed by hand plus
brace/paren balance checks and cross-referencing the generated Zod/TS
types. Treat this as needing a real typecheck before shipping.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* docs(install): note that AmneziaWG kernel module install is still manual
Tracked separately (not yet ported into this script) — see
coinman-dev/3ax-ui's install_amneziawg for the reference approach
(ppa:amnezia/ppa). Also serves as a real, path-filter-matching change
to get the previous empty commit's CI trigger to actually fire —
release.yml's push trigger is paths-scoped and an empty commit changes
no files, so it never matched.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): add a button to randomize obfuscation parameters
Mirrors the existing key-regenerate button next to the private key
field. Client-side randomization matches the ranges/constraints of
GenerateObfuscation20's "default" preset (internal/amneziawg/params.go)
closely enough for a form suggestion — the user can still hand-edit any
field afterward.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(install): auto-install the AmneziaWG DKMS module + amneziawg-tools
Ports install_amneziawg from coinman-dev/3ax-ui's install.sh, adapted to
this script's broader distro coverage and NONINTERACTIVE convention:
- Ubuntu/Debian/Armbian: ppa:amnezia/ppa (primary, tested path), with a
reachability pre-check for the Launchpad PPA host — often blocked by
hosting providers, especially Russian VPS — so a flaky network skips
the feature instead of hanging apt through several retries.
- Fedora/RHEL-family, Arch/Manjaro/Parch: best-effort fallback to plain
wireguard-tools (+ AUR amneziawg-dkms via yay/paru when available),
with a manual-install pointer.
- Everything else: manual-install pointer only.
Also installs ndppd and persists IPv4/IPv6 forwarding (for the future
IPv6/NDP phase, not yet wired into the panel) and adds a Secure Boot
warning at the end of the run, since a DKMS-built module is unsigned
and won't load while it's enabled — a common trap on cloud VPS images.
Never fatal: the panel installs and runs fine either way, an AmneziaWG
inbound just won't bring up its tunnel until the module is present.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): resolve all 3 real CI failures (typecheck/lint/codegen)
Found by checking the fork's Actions tab after the last two pushes —
the release build passed (it doesn't run these checks) but the
separate CI workflow caught three real issues:
- golangci-lint (noctx): every internal/amneziawg/manager.go exec.Command
call is now exec.CommandContext with a 30s timeout, so a hung
awg-quick/awg invocation can't block the reconcile job indefinitely
(mirrors internal/mtproto/process.go's own CommandContext usage).
- tsc --noEmit: frontend/src/schemas/client.ts's hand-maintained
InboundOptionSchema (used by the useClients hook, separate from the
auto-generated one in generated/) never got an awgServer field added
when the AmneziaWG frontend work was done — every read of
inbound.awgServer.* in amneziawgConfig.ts was typing as {}. Added
AwgServerOptionSchema, nested (not flattened like wg*) to match what
amneziawgConfig.ts already expects. Also guarded server.publicKey in
inbound-link.ts's genAmneziaWGLink against the schema's optional type.
- codegen staleness: frontend/public/openapi.json is produced by a Node
script (gen:api) this machine can't run; hand-applied the exact diff
the CI failure log already showed (amneziawg protocol enum entry,
ServerSettings schema, InboundOption.awgServer, one example payload),
verified as valid JSON.
Also confirmed independently by this run: install_amneziawg (previous
commit) installed and loaded the DKMS module successfully on both amd64
and arm64 CI runners. The two "Deploy Smoke Tests" failures are
unrelated to this change — this fork has only ever published the
dev-latest pre-release, and GitHub's /releases/latest API deliberately
excludes pre-releases, so the smoke test's no-argument install path
(which resolves "latest") has nothing to find. Not a regression; needs
an actual tagged release whenever that's wanted.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): Phase 2a — IPv6 support + NDP proxy
Adds native dual-stack IPv6 to AmneziaWG inbounds, ported from
coinman-dev/3ax-ui's approach:
- ServerSettings gets ipv6Enabled/ipv6Subnet/ipv6ExternalInterface;
Instance carries the server's own IPv6 address (first host of the
subnet) alongside its IPv4 one.
- defaultAmneziaWGClients allocates an IPv6 host address per client
(second AllowedIPs entry) when the server has IPv6 enabled, reusing
allocateWireguardAddress — which needed a real fix along the way: it
always suffixed "/32" regardless of address family, which is wrong
for an IPv6 host address (needs /128). Now family-aware.
- generateServerConfig's PostUp/PostDown gains IPv6 forward-accept
rules, proxy_ndp sysctl, and one `ip -6 neigh add/del proxy` entry per
enabled peer with an IPv6 address — the lightweight per-client
method, not the ndppd-daemon whole-subnet method (not worth the
config-file-management complexity at this scale; ndppd itself is
still installed by install.sh in case that changes later).
- ValidateIPv6Subnet rejects a malformed subnet before save.
- Frontend: ipv6Enabled/ipv6Subnet/ipv6ExternalInterface fields on the
AmneziaWG inbound form, EN+RU translations, openapi.json/generated/*
regenerated (the latter via `go run ./tools/openapigen`, pure Go).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): fill in IPv6 fields missed by the Phase 2a commit
Two real gaps the CI caught (both new fields, both my miss):
- inbound-defaults.ts's createDefaultAmneziawgInboundSettings() built a
server object literal predating ipv6Enabled/ipv6Subnet/
ipv6ExternalInterface — AmneziawgServer's inferred type now requires
them (zod .default() fields are non-optional post-parse), so this
didn't typecheck at all.
- openapi.json's ipv6Enabled property was missing the description the
real generator attaches (the Go doc comment covering all three IPv6
fields is attached to the first one) — a one-line diff, but git
diff --exit-code doesn't care how small.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): Phase 2b — per-client port-forwarding
Admins can now set a per-client ForwardedPorts string (e.g. "80, 443,
8000-8100") that gets DNAT'd + FORWARD'd to that peer's tunnel address
via iptables rules in PostUp/PostDown, ported and simplified from
coinman-dev/3ax-ui's shared/portfwd.
Two decisions worth flagging for future readers:
- The iptables --comment tag on each rule is awg-fwd-<fnv32a(email)>,
not the raw client email. Email is admin/API-supplied free text that
ends up embedded in a shell-executed PostUp/PostDown line; a hash
can never carry a shell metacharacter through where raw
interpolation could.
- The reconcile manager gained a third fingerprint (portFwdFP, next to
the existing structural/peers ones). `awg syncconf` only touches the
WireGuard peer table — it never re-applies PostUp/PostDown iptables
rules — so a port-forward-only change has to force a full
awg-quick down+up bounce, same as a structural change, rather than
the lighter sync a plain peer add/remove can use.
Also fixes a real pre-existing bug found while wiring up IPv6 client
allocation in the previous commit's spirit: allocateWireguardAddress
always suffixed "/32" regardless of address family, which produced
invalid host bits for IPv6 (needs "/128").
ForwardedPorts flows through model.Client -> model.ClientRecord
(gorm column wg_forwarded_ports, auto-migrated) -> ToRecord/ToClient/
MergeClientRecord, mirroring the awgServer field's earlier lesson
that new fields need checking against a second, hand-maintained
persistence-layer struct.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): route a client's traffic through Xray via the Routing page
Every enabled AmneziaWG inbound gets its own Xray TPROXY bridge
automatically, with no toggle to enable first: a loopback
dokodemo-door inbound (sockopt.tproxy) tagged with the AmneziaWG
inbound's own real tag, so it's already selectable in the existing
Routing page's inbound-tag picker — the same trick the mtproto
sidecar's own bridge already relies on (InboundService.GetInboundTags
is a plain, protocol-blind SELECT over every inbound row's tag, no
dedicated UI plumbing needed).
internal/amneziawg's defaultPostUpDown TPROXYs every peer's traffic
into that bridge unconditionally; the bridge's port is derived
deterministically from the inbound's id (EgressPortForInbound) so the
kernel-side reconcile loop and the Xray-config generator never need to
negotiate a runtime value between them.
injectAmneziawgEgress never generates a routing rule itself — whether
a client's traffic goes anywhere beyond Xray's default routing is
entirely up to whatever rules the admin adds through the existing
Routing UI (pick the AmneziaWG inbound's tag as source, optionally a
specific peer's IP via that page's own Source-IP field, and an
outbound), exactly the same workflow as routing any other protocol.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): recover orphaned interfaces after an ungraceful exit
Two gaps left an AmneziaWG interface stuck outside the manager's
control after a crash (kill -9/OOM/panic skips StopAll):
- ensureRestart's teardown was gated on the in-memory `exists` map,
which is always empty on a fresh process, so a survived interface
never got interfaceDown before interfaceUp tried `ip link add`
against a name the kernel already had — failing forever and never
populating m.ifaces, so traffic accounting silently stopped and the
inbound could never be removed. Gate on isInterfaceUp instead, which
checks real kernel state rather than this process's own bookkeeping.
- An inbound deleted from the database entirely while the panel was
down has no entry in `desired` ever again, so it never reaches the
per-id cleanup loop in Reconcile (which only walks m.ifaces). Add a
one-time sweepOrphansLocked scan of configDir, mirroring
mtproto.Manager.sweepOrphansLocked, that tears down and removes any
leftover interface/config not in the current desired set.
Found by the automated review on MHSanaei/3x-ui#6105 (Finding 1).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* i18n(amneziawg): backfill IPv6/obfuscation/port-forwarding keys in 11 locales
Only en-US/ru-RU ever got these 9 keys as each AmneziaWG feature landed
(the regenerate-obfuscation button, then Phase 2a's IPv6 fields, then
Phase 2b's per-client ForwardedPorts) — the other 11 locale files were
never backfilled, so i18next has been silently falling back to English
for all of them since Phase 1. Cosmetic-only (never broke anything),
but now closed for every shipped locale.
* fix(amneziawg): resolve 7 Medium findings from the automated PR review
Each is independently reproducible; fixed together since one review pass
found all of them.
- manager.go: the shared "ip rule add fwmark" policy route had no
existence check, so it duplicated in "ip rule show" on every interface
bounce (which hostRulesFingerprint forces on any client add/remove/
re-IP). Now checked via "ip rule list | grep -q ..." first. (Finding 2)
- params.go: ExternalInterface, IPv6ExternalInterface, and subnetIp/
subnetCidr are interpolated unescaped into a shell-executed PostUp/
PostDown line, but only obfuscation and the IPv6 subnet were validated
before save. Added ValidateInterfaceName (a strict charset+length
pattern) and ValidateSubnetIPv4 (netip.ParsePrefix), wired into
normalizeAmneziaWGSettings. (Finding 3)
- amneziawg_job.go: IsAwgInstalled() existed but nothing ever called it,
so a host without awg/awg-quick (the Docker image, RHEL, Arch, a failed
install.sh PPA step) logged a reconcile failure every 10s forever. Now
checked once an inbound actually needs it, warning once instead of
spamming. (Finding 4)
- client_inbound_apply.go: the WireGuard/AmneziaWG credential
carry-forward (added so a metadata-only client edit doesn't rotate
keys) never covered ForwardedPorts, so a partial edit -- an API call or
Telegram-bot toggle that omits the field -- silently wiped a client's
port-forwarding spec. Carried forward and written back the same way the
key fields already are. (Finding 5)
- manager.go: hostRulesFingerprint keyed each peer on its IPv4 address
only, and structuralFingerprint omitted IPv6Enabled/IPv6ExternalInterface
entirely, so an IPv6-only change could pick the syncconf reload path
(which never re-runs PostUp, leaving a stale NDP-proxy entry) or be a
complete no-op. Both fingerprints now cover the IPv6 fields. (Finding 6)
- port_conflict.go: the AmneziaWG egress bridge (injectAmneziawgEgress)
binds 127.0.0.1:63100+id with no collision check anywhere, since it
isn't a database row the ordinary port-conflict query can see -- same
blind spot the reserved Xray API port already has its own check for.
Added the equivalent check for the AmneziaWG bridge port. (Finding 7)
- install.sh: install_amneziawg ran unconditionally for every install/
update, building a DKMS kernel module and enabling host-wide IPv4/IPv6
forwarding whether or not the feature is ever used. Gated behind a new
should_install_amneziawg (XUI_INSTALL_AMNEZIAWG=true/false, or an
interactive y/N prompt defaulting to no). Also replaced the deprecated
apt-key adv with a dedicated keyring + signed-by= on the Debian branch,
and guarded its sources.list appends against duplication on a retried
install. (Finding 8)
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): make the Xray TPROXY bridge a per-inbound opt-in
Addresses Finding 10 from the automated PR review: an always-on TPROXY
bridge makes every AmneziaWG tunnel hard-depend on Xray being up (all
traffic, including DNS, drops whenever Xray restarts), and forces a full
awg-quick down+up bounce on any client add/remove/re-IP, permanently
losing the syncconf fast path.
Adds ServerSettings.RouteThroughXray (off by default):
- defaultPostUpDown only emits the TPROXY/policy-route rules when it's
on; a plain AmneziaWG tunnel now has zero Xray dependency out of the
box.
- structuralFingerprint covers it (toggling it changes whether PostUp/
PostDown contain any TPROXY rules at all -- structural, not a
per-peer host-rule). hostRulesFingerprint's IPv4 tracking is now
itself conditional on RouteThroughXray (and IPv6 tracking on
IPv6Enabled), so an instance that never uses either keeps the
syncconf fast path for a plain peer re-IP.
- injectAmneziawgEgress only creates a bridge for inbounds that opted
in; checkAmneziawgEgressConflict (the Finding-7 fix) now parses each
candidate through InstanceFromInbound so a non-routed inbound's port
is correctly never treated as reserved.
- New inbound-level Switch in the AmneziaWG form; the actual outbound
decision is still made entirely through the panel's stock Routing
page, same as before -- only whether the bridge exists at all is now
a choice.
Translation keys added to all 13 locales in the same commit this time,
not backfilled later (see Finding 9's lesson).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): resolve 4 Low findings from the automated PR review
- manager.go: serverAddress assumed subnetIp always ends in ".0"; a
base like "10.8.1.5" was used verbatim as the server's own address,
eventually colliding with peer allocation (which starts at .2
upward). Now derives the first host of the actual subnetIp/subnetCidr
network via netip, matching serverAddressV6's own approach. A /32
base (no host bits at all) is still used as-is. (Finding 12, partial
-- the /16 pool-widening half of this finding only exists on the
upstream-pr/amneziawg branch's merged client_wireguard.go, not here;
handled separately on that branch.)
- manager.go: ensureLocked carried the previous per-peer traffic
counters (`last`) forward even through a full restart, but
awg-quick down+up resets the kernel's own counters to zero -- the
next CollectTraffic computed a large negative delta (clamped to 0),
silently discarding real traffic. Extracted the decision into
nextTrafficBaseline: only a reload (syncconf) preserves the
baseline. (Finding 13)
- portfwd.go: exported ForwardedPortsInclude; inbound_amneziawg.go's
new checkForwardedPortsConflict uses it to reject, at save time, a
client's forwardedPorts that would DNAT the panel's own port or
another enabled inbound's port to the tunnel client --
portForwardLines has no destination restriction, so this collision
was previously silent. Wired into both the single-client update path
and the add-client path (client_inbound_apply.go), plus
normalizeAmneziaWGSettings for the whole-inbound save path. (Finding 14)
- inbound.go: InboundOption.AwgServer sent the whole ServerSettings
struct including PrivateKey to GetInboundOptions callers -- a
shared, admin-wide dropdown-filling endpoint the frontend's own
AwgServerOptionSchema never reads that field from. Redacted it
before assigning. (Finding 11)
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): don't widen the peer address pool past AmneziaWG's own subnet
Completes Finding 12 from the automated PR review (the serverAddress half
of this finding was already fixed on main and cherry-picked here). This
half is specific to this branch: allocateWireguardAddress's /16
pool-widening fallback is an independent addition from upstream's own
main that this branch inherited during the cherry-pick rebase -- it
doesn't exist on the fork's own main at all, so this fix can't be
cherry-picked the normal way and is committed directly here.
Widening is safe for WireGuard's own Xray-native inbound (AllowedIPs
isn't tied to a strict kernel interface subnet), but AmneziaWG's kernel
interface Address is exactly the configured subnet -- an address
allocated from the containing /16 once the /24 fills up would be
silently unroutable. allocateWireguardAddress now takes an explicit
allowWidening bool: WireGuard's own caller passes true (unchanged
behavior), AmneziaWG's passes false (fails loudly on exhaustion instead).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* docs(docker): note that AmneziaWG doesn't work in this image
Investigated: the image is Alpine-based, and AmneziaWG's own packaging
(DKMS module + amneziawg-tools) doesn't target Alpine/musl at all --
unlike the Debian/Ubuntu/Fedora/Arch paths install.sh already handles,
there's no package to apk add even with full host network/capabilities.
The panel already degrades gracefully (IsAwgInstalled() logs one warning
instead of retrying forever), so no code change is needed -- just made
the reason explicit at the point where a user would reach for cap_add/
network_mode to try to work around it.
* fix(sub): include amneziawg inbounds in subscription links
getInboundsBySubId's SQL protocol allowlist never had 'amneziawg' added,
so every AmneziaWG client was silently excluded from all three
subscription formats (plain/individual links, JSON, Clash) and from the
Telegram bot's QR/individual-link buttons, which fetch through the same
path. genAmneziaWGLink itself was already fully implemented and already
wired into GetLink's dispatch switch -- it just never got a chance to
run. Same bug shape as the earlier TRACKED_PROTOCOLS frontend gap: a
hardcoded protocol list one entry short.
Found while investigating whether the Telegram bot needed AmneziaWG-
specific client-management code -- it doesn't (the bot itself is fully
protocol-agnostic), but this is the actual root cause of "can't share
an AmneziaWG client's config via the bot."
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(inbound): enforce node-eligibility server-side, not just in the UI
Investigated multi-node interaction with AmneziaWG: the master's own
reconcile (DesiredAmneziaWGInstances) and Xray config generation
(injectAmneziawgEgress, the GenXrayInboundConfig protocol skip) all
correctly filter on NodeID IS NULL, so a node-assigned AmneziaWG (or
MTProto) inbound would never be managed by the master. But nothing
stopped one from being created that way: NODE_ELIGIBLE_PROTOCOLS
(frontend/src/pages/inbounds/form/InboundFormModal.tsx) only hides the
node picker client-side -- a direct API call could set nodeId on an
AmneziaWG inbound, which every node then reconciles as an ordinary
local inbound (nodes run the identical binary, full cron suite
included), leaving it running unmanaged and untracked by the master's
own AmneziaWG bookkeeping.
Added isNodeEligibleProtocol (inbound_protocol.go), mirroring the
frontend's allowlist, and enforced it in both AddInbound (the actually
exploitable path -- nodeId comes straight from the request) and
UpdateInbound (defense in depth; NodeID is already restored from the
stored row there before this check, so it mainly guards against a
protocol change on an existing node-hosted inbound).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): allow TPROXY-marked traffic through a default-deny INPUT chain
TPROXY never rewrites a packet's own destination address, only the routing
decision. A default-deny firewall whose INPUT chain sanity-checks "is this
destination actually local" (UFW's ufw-not-local, via addrtype --dst-type
LOCAL, is a concrete example) silently drops the redirected packet before
Xray's socket ever sees it -- RouteThroughXray looked fully configured
(TPROXY rule present and counting, Xray listening with IP_TRANSPARENT set)
yet every peer's traffic vanished with no trace on either side.
Adds an idempotent, never-torn-down "iptables -I INPUT 1 -m mark --mark
<fwmark> -j ACCEPT" alongside the existing shared policy route, so this
works regardless of which firewall manager owns the rest of the INPUT chain.
* fix(frontend): give AmneziaWG the same UDP tag and its own tag color
The Inbounds list only special-cased isWireguard/isHysteria for the "UDP"
network badge, so an AmneziaWG row showed just the bare protocol tag with
no transport badge next to it. Added the missing isAmneziawg flag (mirrors
isWireguard exactly) and wired it into the same branch.
Client-row protocol-color maps in ClientsPage/HostList had no amneziawg
entry, silently falling back to grey -- ClientInfoModal already had
amneziawg: 'yellow' from earlier work, these two just never got it.
* feat(logs): show which AmneziaWG client an access-log line belongs to
The dokodemo-door TPROXY bridge every AmneziaWG peer's traffic is routed
through has no per-user identity, so Xray's own access log never carries an
"email:" token for these lines -- the Access Logs modal showed a blank
Email column for every in-*-udp row, even though every other protocol's
rows show the client normally.
The peer's decapsulated tunnel IP does survive as the log's "from" address,
and that IP deterministically maps to exactly one configured peer. Builds a
"<inbound tag>|<ip>" -> email index from the same AmneziaWG inbounds already
parsed elsewhere (amneziawg.InstanceFromInbound), and fills in Email from it
whenever the raw log line didn't have one.
* fix(amneziawg): enable sniffing on the TPROXY bridge
Domain-based Routing rules could never match RouteThroughXray traffic: an
AmneziaWG peer resolves DNS itself, through the tunnel, before ever sending
a packet, so the decapsulated traffic TPROXY hands to the bridge is already
a bare destination IP with no domain name attached at the network layer.
Every other inbound recovers this via sniffing (confirmed working for the
stock wireguard inbound, which does have it configured); the bridge never
got a sniffing block at all, so only tag/IP/network-based rules could ever
match it -- any domain rule above it in the list was silently unreachable.
* docs: add an AmneziaWG config page and list it as a supported protocol
Closes the PR checklist gap: the feature shipped with zero mention on
the docs site. Mirrors reality.mdx's structure (key settings, setup
steps, config excerpt) and notes the Docker/multi-node/Telegram-bot
caveats the PR itself is honest about not having confirmed.
* fix: address the fresh review round on PR #6105 (8 findings)
1. hostRulesFingerprint didn't account for ForwardedPorts when
RouteThroughXray was off, so re-IPing a peer with port-forwarding
configured left stale DNAT rules pointing at an address the next
peer could be handed.
2. Server/client config values (keys, email, I1) were never validated
for control characters before being written into the generated
.conf; a newline could smuggle a PostUp hook into awg-quick's
parser. Added ValidateConfigValue at save time and a
sanitizeConfigValue backstop at render time.
3. checkForwardedPortsConflict didn't scope to node_id IS NULL, so a
port used only on a different node produced a false collision; also
hoisted the panel-port/inbounds lookup out of the per-client loop
(portConflictContext) so N clients cost one query, not N.
4. PostDown commands were ";"-joined and abort on the first failure;
appendOrTrue makes teardown best-effort so an external firewall
flush can't leave DNAT rules to accumulate across bounces.
5. The "ip rule list | grep -q" existence check could SIGPIPE under
pipefail and re-add a duplicate rule; switched to grep -c >/dev/null.
6. Ported the vpn:// share-link format (base64url of the plain .conf
text, matching the real AmneziaVPN app) onto this branch -- it had
only ever landed on our own fork's main, so this PR branch was still
on the old amneziawg://+query-params scheme our own docs no longer
described. Also corrected the docs' install.sh claim (opt-in/
interactive, not automatic) and stale pre-opt-in comments in
route_egress.go.
7. install.sh: Arch's ndppd install used pacman -Syu (full system
upgrade) instead of -Sy like every other call in the script; and
should_install_amneziawg re-prompted on every `x-ui update` even
when awg was already installed.
8. CollectTraffic could clobber a concurrent restart's freshly-reset
(empty) traffic baseline with stale pre-restart counters, since
getPeerStats runs lock-free; now checks pointer identity before
writing back. sweepOrphansLocked permanently disabled itself on a
transient os.ReadDir failure instead of allowing a retry.
go build/vet/test and frontend typecheck/lint/build/vitest all pass.
* fix(install.sh): check the live sysctl value, not sysctl.conf text
Reviewer feedback (cherts, PR #6105): grepping /etc/sysctl.conf for the
setting name is unreliable -- many distros split sysctl config across
/etc/sysctl.d/*.conf, and /etc/sysctl.conf can be a symlink into that
directory, so the check can miss an already-active setting (harmless
duplicate append) or match a disabled/commented line (forwarding
silently stays off). Query the live value via `sysctl -n` instead,
which is accurate regardless of which file set it. Applied the same
fix to both the IPv6 and IPv4 checks for consistency.
* fix: update inbound_amneziawg.go to the split buildInboundForLocalRuntime
Same fork-only-file blind spot as the one caught on our own main after
the 3.6.0 sync: upstream split buildRuntimeInboundForAPI into
buildInboundForNodePush / buildInboundForLocalRuntime (part of the
node-sync client-deletion fix, 5bc81dfd), updating every call site it
could see. This file doesn't exist upstream, so it kept calling the
old name even after the branch merged in that commit.
* fix(frontend): recognize AmneziaWG's vpn:// scheme in share-link labels
The shared link-tag/label helper (used by the client info modal, QR
modal, and subscription page) had no entry for the vpn:// scheme
AmneziaWG links use, so it fell through to the generic fallback: a
plain "Vpn" tag with no color, and an empty remark/port that made the
row's title fall back to "Link N" instead of the inbound's actual
name:port — unlike every other protocol, which shows its real tag and
label.
vpn:// links are base64url of a plain .conf text (matching the real
AmneziaVPN app's own share-link format), not a structured URL, so
there's no query string or #hash to read a remark/port from. Decode
the payload and pull the remark/endpoint back out of the .conf text
directly instead.
* fix(xray): force a full restart for TPROXY inbounds, never hot-add them
Real incident: an AmneziaWG inbound with RouteThroughXray enabled lost
all internet on that connection after a migration. Root-caused on the
live box -- iptables TPROXY counters were incrementing (packets
correctly redirected to 127.0.0.1:63110), but nothing was actually
listening there (ss showed nothing on that port) until a full
`systemctl restart x-ui`, after which the bridge came up immediately.
Xray-core's gRPC AddInbound reports success for a new sockopt.tproxy
inbound (internal/amneziawg's own Xray egress bridge is the only kind
this fork ever generates) but doesn't reliably bind a working listener
for it outside of process startup -- the bridge silently never comes
up, and RouteThroughXray traffic goes nowhere until the next full
restart happens to occur for an unrelated reason.
diffInbounds already has this exact defensive pattern for REALITY
inbounds ("a gRPC remove+add does not reliably rebuild the REALITY
authenticator"), just never extended to TPROXY, and only in the
already-existing-then-changed branch -- the "brand new inbound" branch
had no such guard at all, which is exactly the path a freshly-enabled
RouteThroughXray bridge takes. Added inboundUsesTproxy and wired it
into both branches.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): flag Xray for resync when a peer edit changes qualifying state
Real production bug, root-caused on iiadmin-vps: updateAmneziaWGInbound/
AddInbound/DelInbound only ever updated the kernel interface via
amneziawg.GetManager() -- they never called SetNeedRestart the way every
other protocol's mutation path does (client_crud.go, inbound.go, etc. all
do). injectAmneziawgEgress's TPROXY bridge inbound depends on
InstanceFromInbound finding at least one qualifying peer plus
RouteThroughXray, so an edit that flips that (first peer added, last one
removed, RouteThroughXray toggled on) previously required a full panel
restart before the bridge actually got created, with no error anywhere:
the kernel interface would handshake fine, but traffic redirected into the
bridge's TPROXY port went nowhere because nothing was listening there.
diffInbounds/inboundUsesTproxy already correctly force a full restart for
a brand new TPROXY inbound (bdee0a20) -- that part was never the bug. The
gap was entirely upstream: nothing ever told Xray a resync was even needed.
* fix(clients): reject AllowedIPs already used on another WireGuard/AmneziaWG inbound
defaultWireguardClients/defaultAmneziaWGClients only ever checked uniqueness
against their own inbound's client list, so two inbounds sharing a subnet
(same protocol or not) could silently hand out or accept the same address --
the exact scenario behind a real duplicate-IP incident where a WireGuard and
an AmneziaWG client both ended up on the same address. otherTunnelAllowedIPs
now collects every address already claimed on every other tunnel inbound and
folds it into both the auto-allocation pool and the manual-entry collision
check, naming the other inbound in the error when it fires.
* fix(frontend): add the missing AmneziaWG config download on the sub page
The subscription page already gave WireGuard links their own "Config"
block (copy/download/QR of the actual .conf, via wireguardConfigFromLink
reversing the wireguard:// query params) but had no equivalent for
AmneziaWG's vpn:// links -- its isWireguardLink gate never matched them,
and no reverse-parse helper existed for this page specifically. Every
other surface (InboundInfoModal, ClientInfoModal, ClientQrModal) already
had this parity; this was the one page that didn't.
Fixed by adding amneziawgConfigFromLink (inbound-link.ts), simpler than
its WireGuard counterpart since a vpn:// payload already *is* the plain
.conf text -- just base64url-decode it, no query-param reconstruction
needed -- and wiring it into SubPage.tsx alongside the existing WireGuard
block, reusing the same pages.clients.amneziaWgConfig label the other
three surfaces already use.
* fix(xray): force a full restart for password-auth SOCKS5 hot-apply
Real production incident: editing a client under an AmneziaWG inbound
left its embedded SOCKS5 relay's settings byte-different (a new account
list), and Xray's gRPC remove+add hot swap silently dropped the account
for a peer whose email contained non-ASCII characters -- its tunnel kept
handshaking fine but all its traffic got rejected at the SOCKS5 layer,
while every other peer on the same relay was unaffected. A full restart
(reading the same JSON straight from disk) always produced the correct
account list. socks isn't in userDiffableProtocols (that only covers
vless/vmess/trojan's clients+email shape, not accounts+user), so any
settings drift on this inbound fell through to the generic remove+add
path. Forces a restart instead, the same defensive choice already made
for REALITY and TPROXY -- scoped to auth:"password" specifically so the
other, noauth SOCKS5 bridges (panel/node/mtproto egress) keep the cheaper
hot path.
* Fix Attach reusing one identity's address across wg/awg inbounds
ClientService.Attach deliberately copies one identity's stored
AllowedIPs into every WireGuard/AmneziaWG inbound it's attached to
in the same call, so the same person gets the same tunnel address
on every protocol they use. Its loop calls addInboundClient once per
inbound, and each of those independently computes
otherTunnelAllowedIPs -- so by the second inbound in the batch, the
first inbound's just-written copy of this identity's own address
looked like a cross-inbound collision against itself.
Real production symptom this caused: detaching then re-attaching a
client to both wg and awg failed with "wireguard: allowedIPs entry
X is already used by a client on inbound 'awg' (#N)" -- the exact
address the identity is supposed to keep, rejected as if it belonged
to someone else.
Add a selfEmails exclusion to otherTunnelAllowedIPs and populate it
from the client(s) being processed at the one real call site. Safe
unconditionally: ClientRecord.Email is globally unique, so a match
can only ever be this same identity's own entry on a sibling inbound,
never a genuine different client's address.
Reproduced the underlying mechanism live (manual entry correctly
rejected as a cross-inbound collision; fresh auto-allocation
correctly avoided a used address) before writing the fix, to confirm
the guard itself works and the bug is specifically in how Attach's
per-inbound calls interact with it.
* Attach: allocate fresh when re-attaching with no active tunnel
The previous fix (82cc69f5) made Attach's own address-reuse
correctly not collide with itself across inbounds -- but it still
always reused an identity's stored AllowedIPs verbatim, even when
that identity currently has zero WireGuard/AmneziaWG attachments at
all. A real report from testing this live: an identity fully
detached from both its wg and awg inbounds, then re-attached, got
its old address back even though several lower addresses were free
-- because nothing about being fully detached ever cleared the
stored value Attach copies from.
Add hasTunnelAttachment, checked once against the identity's CURRENT
inbound set before Attach's loop runs: if none of its current
inbounds is WireGuard/AmneziaWG, clear the stored AllowedIPs so this
attach allocates fresh (matching what a brand-new client would get)
instead of resurrecting an address nothing reserves anymore. Left
alone when the identity already has an active tunnel elsewhere, so
extending it to a second protocol still keeps a consistent address.
* Fix TestOtherTunnelAllowedIPsExcludesSelfEmail's own test setup
CI caught this: the "genuinely different client" (other@wg) was
seeded onto the SAME inbound passed as excludeID, which
otherTunnelAllowedIPs already excludes entirely regardless of the
selfEmails fix -- so the assertion that its address is still
reported could never have passed, proving nothing either way. Move
it onto the sibling inbound alongside shared@id, which is what the
test actually needs to exercise (two clients on one sibling, one
excluded by email, one not).
* Attach: never inherit an address that doesn't fit the target inbound
hasTunnelAttachment (from the earlier fix, commit 51067f16) only
asked "does this identity have ANY tunnel attachment", treating that
as license to reuse its stored address verbatim on every inbound
being attached. Real production case this missed: an identity's
stored address came from WireGuard's own fallback subnet
(10.0.0.0/24, used when that inbound has no other clients to infer a
base from), then got attached to a second, AmneziaWG inbound
configured for a completely different subnet (10.8.1.0/24).
defaultAmneziaWGClients's already-set-AllowedIPs branch only checks
for collisions, never subnet membership, so the mismatched address
was accepted silently -- producing a peer that can never actually
connect, since an AmneziaWG address must fall inside the kernel
interface's own configured subnet to be routable at all.
Add addressesFitAmneziaWGInbound, checked per inbound inside Attach's
loop: if the inherited address doesn't fit the SPECIFIC inbound being
attached, clear it just for that one so it gets a fresh, valid
allocation instead, while other already-attached inbounds keep their
existing values. WireGuard has no equivalent strict subnet
requirement (allocateWireguardAddress can widen to a fallback pool
for it), so this only ever constrains AmneziaWG targets.
* Give WireGuard an explicit, admin-configurable subnet field
WireGuard previously had no configurable subnet at all -- only an
implicit one, either inferred from existing clients' own addresses
(wireguardAllocationBase) or a hardcoded 10.0.0.0/24 fallback when
none exist yet. AmneziaWG, by contrast, has always had a real
server.subnetIp/subnetCidr field in its settings, editable in the
UI. User request: give WireGuard the same treatment.
Backend: explicitWireguardSubnetBase reads an optional subnetIp/
subnetCidr pair from the inbound's own settings JSON (mirroring
AmneziaWG's defaultAmneziaWGSubnetBases). defaultWireguardClients
checks it first; only when unset does it fall back to today's
inference-from-existing-clients behavior, so an inbound saved before
this field existed keeps working exactly as it always has.
Frontend: subnetIp/subnetCidr added to WireguardInboundSettingsSchema
and the inbound form (mirroring AmneziaWG's own field layout/labels),
with a real default (10.0.0.0/24, the same value the backend already
fell back to) seeded for newly created inbounds so the field starts
populated and editable rather than blank. Translated across all 13
locales.
This also structurally closes the class of bug fixed in
82cc69f5/291c47b3: with wg and awg subnets explicit and
independently controllable, an admin who wants matching addresses
across both protocols can configure them to actually agree, instead
of one silently inheriting the other's incompatible range.
* Split the client edit form's AllowedIPs into per-protocol fields
A client attached to both WireGuard and AmneziaWG shared one AllowedIPs
form field with a dynamically-switching label, so its two genuinely
different addresses could never both be shown or edited correctly.
Worse, Update/Create broadcast that one shared value to every attached
wg/awg inbound with no subnet-fit check, so an ordinary edit save could
silently overwrite one protocol's address with the other's -- the same
bug class already fixed for Attach, but reachable from any client edit.
model.Client gains an optional AllowedIPsByInbound map so a caller can
send distinct values per inbound; Update/Create honor it and, when it's
absent, clear a shared value that doesn't fit an AmneziaWG inbound's own
subnet instead of writing it through. A new TunnelAllowedIPsByInbound
read path feeds the real per-inbound address to the client edit form via
GET, which now renders two separate, correctly-labeled fields whenever
both protocols are attached (unchanged single dynamic field otherwise).
* Regenerate openapi.json for the new allowedIPsByInbound field
Follow-up to 878ee839: gen:zod (frontend/src/generated) was already
regenerated and committed, but gen:api (frontend/public/openapi.json)
wasn't, so CI's codegen drift check failed.
* Fix build breakage from merging upstream main: Update() gained a limitHwid param
Two of our own AllowedIPs tests (not present upstream, so the merge never
flagged them as conflicting) still called the old 3-arg Update(inboundSvc,
id, client) -- upstream's hardware-ID-limit feature added a required
limitHwid parameter that every other caller in this package already
passes. Also drop createDefaultInboundSettings from InboundsPage.tsx: the
merge conflict resolution kept the import, but upstream's clone-payload
refactor (buildClonePayload, inbound-clone.ts) already calls it
internally now -- this file doesn't need it directly anymore.
* Fix real bug: AmneziaWG clients rejected as "empty client ID" in 3 places
Three switch statements on inbound.Protocol handle "wireguard" explicitly
(checking client.PublicKey) but fall through to the default case for
"amneziawg" (checking client.ID, which AmneziaWG clients never set --
they use PublicKey/Email like WireGuard, not the VMess/VLESS UUID field).
This is what the 4 AllowedIPs tests were actually catching:
UpdateInboundClient's newClientId derivation hit this same default branch,
so every Update() on an AmneziaWG client returned "empty client ID"
before ever reaching the AllowedIPs logic being tested.
Fixed by adding "amneziawg" alongside "wireguard" in each switch:
addInboundClient's per-client validation, UpdateInboundClient's
newClientId derivation, and AddInbound's per-client validation (the
third one wasn't hit by these tests, but has the identical bug -- creating
a brand-new AmneziaWG inbound with a client attached would fail the
same way).
* refactor(amneziawg): rename Obfuscation20 to Obfuscation31, drop the dead mobile preset
Mechanical rename ahead of the AmneziaWG 3.1 parameter work: the type,
generator and prose all said 2.0, and the "mobile" generator preset was
reachable only from its own test. No behavior change.
* feat(amneziawg): AmneziaWG 3.1 obfuscation parameters (backend + generated schemas)
Adds the 3.1 parameter surface to the inbound settings and both Go config
emitters: I2-I5 signature packets, HeaderProtectionKey (base64 32-byte,
shared server<->client), ContentPaddingAddition, the five handshake-timing
randomization ranges (RekeyAfterTime/RekeyTimeout/RejectAfterTime/
KeepaliveTimeout/MaxHandshakeAttempts), and the RandomTrailers/
DisableCookies switches. Freshly generated sets fill everything except
I2-I5 (matching Amnezia's own generator) with jittered ranges bracketing
WireGuard's stock timing constants; every reject window starts >= 30s
above the rekey window by construction. Empty fields stay off the wire,
so blanking a field disables just that feature.
Validation generalizes the H1-H4 range checker for the new uint32-range
fields, requires min 1 on timers, cross-checks rekey-vs-reject, and
demands a real 32-byte base64 header-protection key. The manager warns
once per process when the installed awg tools predate 3.1 but an inbound
uses 3.1 parameters (awg-quick rejects unknown keys with a generic
error otherwise); apply still proceeds.
Requires amneziawg-tools v3.1.20260812+ / module or amneziawg-go
v3.1.20260814+ on the host.
* feat(amneziawg): emit and randomize 3.1 parameters in the frontend
Both client-config emitters (the vpn:// link builder and the clients-page
.conf builder) now carry the 3.1 [Interface] lines in the same order as
the Go emitters. The obfuscation randomizer moves out of InboundFormModal
into a shared lib/xray/amneziawg-obfuscation.ts that also fills the new
fields, and createDefaultAmneziawgInboundSettings switches from static
values to that generator — a fresh inbound now really gets the unique
fingerprint the docs promise instead of the same jc=5/jmin=10 set on
every install.
Schema parse-time defaults for the new fields stay ''/false on purpose:
real values come only from the generator, so resaving an inbound never
mutates its stored parameters. A new parity test pins the hand-written
AmneziawgServerSchema to the generated ServerSettings key set, so a field
added on one side can no longer silently vanish from configs.
* feat(amneziawg): 3.1 form fields and translations
Inbound form gains inputs for I2-I5, HeaderProtectionKey (filled by the
existing obfuscation Regenerate button), ContentPaddingAddition, the five
timing ranges, and the RandomTrailers/DisableCookies switches; the MTU
input picks up the min=1 its schema already enforced. All 13 locales get
the 19 new keys and drop the "2.0" branding from the s3/s4/i1 labels.
* docs(amneziawg): document 3.1 parameters; install.sh kernel/version notes
The AmneziaWG page's obfuscation section moves from the 2.0 to the 3.1
parameter set: table rows for I2-I5, HeaderProtectionKey,
ContentPaddingAddition, the timing-randomization ranges and the
RandomTrailers/DisableCookies switches, a requirements callout (tools
v3.1.20260812+, module/awg-go v3.1.20260814+, Linux 6.7+ for the DKMS
path), and a sample client .conf that matches what the panel actually
emits (including the DNS defaults and PersistentKeepalive it always had).
install.sh warns before a DKMS build on a pre-6.7 kernel and after any
install that left pre-3.1 amneziawg-tools on PATH.
Also updates the hosts API operation paths ({id} -> {groupId}) in the
stale ru/zh/fa reference pages: syncing docs/public/openapi.json for the
new AmneziaWG schema fields surfaced that rename, which had never been
copied over, and the docs build fails on paths missing from the spec.
* fix(amneziawg): reject control characters and canonicalize 3.1 range values
Adversarial review of the 3.1 work surfaced a validation gap:
base64.DecodeString silently ignores CR/LF, so a header-protection key
that picked up a line wrap in transit decoded to a valid 32 bytes,
passed validation, and was emitted verbatim into every client config —
where the orphan second line breaks the import while the server (whose
emitter strips control chars) keeps running with the correct key. The
key and range validators now reject control characters outright.
Also from the same review: range values are canonicalized on save
("110 - 140" -> "110-140", whitespace-only collapses to feature-off,
closing a case where the server conf rendered an invalid blank-value
line the client emitters omitted); the rekey/reject invariant is now
enforced against WireGuard's 120s/180s defaults when only one side is
set; and the structural fingerprint joins on "\n" instead of "|",
which is a legal I1-I5 character and made adjacent free-text fields
join-ambiguous.
* fix(install): resolve latest release tag via web redirect to dodge API rate limits
The non-interactive install smoke test resolved the release version through
the unauthenticated GitHub API (api.github.com/.../releases/latest), which
allows only 60 requests/hour per IP. The test installs twice in one run, and
on shared CI runner IPs the second call gets rate-limited, returns no
tag_name, and install.sh treats an empty version as fatal (exit 1) — the same
"Failed to fetch x-ui version" real users hit behind CGNAT/shared addresses.
resolve_latest_tag() now reads the tag from the github.com releases/latest
web redirect (not subject to the API rate limit), falling back to the API
only if the redirect yields nothing. Verified with the real
deploy/test/smoke-noninteractive.sh (two installs, both green).
* fix(amneziawg): three review findings on #6105, plus a comment trim
1. A peer's allowedIPs reached the generated .conf unvalidated and
unsanitized, unlike email/publicKey/preSharedKey which
normalizeAmneziaWGSettings already guards. A newline in an entry let a
following "[Interface]" re-open the interface section, whose "PostUp = ..."
awg-quick then runs as root on the next apply. Reproduced end to end
against generateServerConfig. The save path now rejects and canonicalizes
through normalizeWireguardAllowedIPs, and the render path sanitizes as a
backstop for rows predating the validation (an upgrade, a restored backup,
a direct DB edit). H1-H4 get the same render-time sanitize, and the two NIC
name fields a plausibility check, since stripping control characters alone
would still let a shell metacharacter into a root-executed PostUp line.
2. EgressPortForInbound is 63100 + inbound id, so an id past 2435 derives a
port above 65535 -- and Xray rejects the whole generated config over one
invalid port, taking every other protocol down with it. It now reports
ok=false past the range, and both the Xray bridge and its TPROXY rules are
skipped instead of emitting an impossible port.
3. The downloadable AmneziaWG .conf read ClientRecord.allowedIPs, a single
shared column that holds the WireGuard address for an identity attached to
both protocols -- the exact ambiguity tunnelAllowedIPs was added to resolve
for the edit form. The info and QR modals already hydrate that field, so
they now pass this inbound's own address to the builder.
Also trims the comment blocks in the files touched here to the 2-line
guidance in CLAUDE.md: internal/amneziawg alone carried 423 comment lines in
over-long blocks against 118 for the comparable internal/mtproto, and is now
at 110. Every non-obvious constraint is kept (the kernel S1/S2 rule, why
PostDown is best-effort, why grep -c and not -q, why the fingerprints split
three ways); the narration is gone. Two hot_diff.go comments pointed at an
internal/amneziawgnet package and an injectAmneziawgnetSocks function that
exist nowhere in the tree; the checks themselves are unchanged.
* feat(logs): add an AmneziaWG log view to the overview
The overview has an access-log view for Xray but nothing for AmneziaWG, so
when a tunnel misbehaves there is no way to see it from the panel at all. A
kernel tunnel logs no per-request lines, so the equivalent view is built from
the two things it does expose:
- Live per-peer activity from `awg show <iface> dump`, joined to the client
email through the desired peer set: last handshake, endpoint, allowed IPs,
cumulative transfer and online state, newest handshake first.
- The panel's own AmneziaWG event lines (interface up/down, awg-quick
failures, the pre-3.1 tools warning), which are what actually explain a peer
being absent from the table.
POST /panel/api/server/amneziawglogs/:count serves both, with the same
count + filter contract GetXrayLogs uses, and the modal mirrors XrayLogModal's
toolbar, auto-update, mobile cards and download. The action-bar button is
gated on a new status.amneziawg.configured, which stays true while an inbound
exists but its interface is down -- exactly when the event lines matter.
Verified against a running panel: the endpoint returns the peer table and
real event lines ("awg/awg-quick not found on PATH", "create config dir:
permission denied"), and count and filter both narrow as documented.
One of those lines surfaced a Debugf that had been rendering as
"for inbound1:amneziawg:"; fixed here since it is now user-visible.
* fix(amneziawg): stop double-counting a routed inbound's traffic
injectAmneziawgEgress tags its Xray bridge with the AmneziaWG inbound's own
tag, so the stock Routing page can target it. Xray therefore reports that
bridge's bytes under the inbound's tag, and XrayTrafficJob feeds them to
AddTraffic -- which accumulates -- on top of the same bytes AmneziaWGJob
already reported from `awg show dump`. An inbound with routeThroughXray on
counted roughly twice its real traffic, which also inflates the quota checks
that read the same counters.
The awg counters are the complete measure: every peer, whether or not TPROXY
routed it, and the same wire bytes the per-client totals are built from, so
they stay and the Xray rows are dropped. Per-client stats were never affected
-- a dokodemo-door bridge has no per-user identity, so Xray emits no
user>>>email rows for it.
Filtering happens before every consumer, so the DB totals, the external
traffic inform and the dashboard's live speed all read one source per inbound.
The set of bridge tags now comes from a predicate shared with
injectAmneziawgEgress itself, with a test that pins the two together -- naming
one tag too few doubles the traffic again, one too many makes real traffic
vanish.
* fix(amneziawg): align the three .conf emitters on one peer field order
The panel builds an AmneziaWG client .conf in three independent places, and
they disagreed: buildAmneziaWGClientConfig put PresharedKey right after
PublicKey (wg-quick(8)'s own order, and what both WireGuard emitters on the
clients side already use), while genAmneziaWGConfig and the Go
amneziaWGConfigText put it after Endpoint. A user comparing a subscription
link against a downloaded .conf sees the difference immediately, and the
generators are exactly the kind of parallel implementation CLAUDE.md warns
about drifting.
Moves the two outliers onto the wg-quick order. Also drops the stray trailing
newline that only appeared when PersistentKeepalive was set, so a config now
always ends on its last set field whichever that is -- the same shape all
three emitters produce for the same client.
Parsing is unaffected either way (the format is order-insensitive, and the
AmneziaVPN app reads it as a flat key-value bag), so this changes only the
rendered text. Adds a test on each side that pins the peer block's field
order, since nothing previously asserted it.
* refactor(amneziawg): switch to the embedded amneziawg-go/gVisor architecture
Replaces the kernel-module (DKMS) + awg-quick + TPROXY backend with the
fork's own embedded design: amneziawg-go runs in-process over a userspace
gVisor netstack, and each peer's decapsulated traffic relays into its own
loopback Xray SOCKS5 inbound, so Xray's native stats/sniffing/routing work
for free instead of through hand-rolled bridges. No kernel module, no DKMS,
no Secure Boot conflicts, works the same in a container as on bare metal.
- internal/amneziawgnet: new package (Device/UAPI, gVisor netstack, TCP/UDP
forwarding, SOCKS5 relay, peer identity, IPv6 host-alias egress identity,
per-client port-forwarding) - amneziawg-go v3.1.20260814 + gvisor.
- internal/amneziawg: keep the reusable protocol-shape types/validation
(Instance/Peer/Obfuscation, InstanceFromInbound); drop the OS-shellout
half (awg-quick, TPROXY policy routing, NDP proxy, peer-stats parsing).
- internal/web/service: rewire the 5 integration points (job, runtime,
client-apply, web shutdown, xray config) from the old manager to the new
one; the AmneziaWG log view is rebuilt on the embedded Device's own UAPI
dump (extended to carry endpoint/AllowedIPs) instead of `awg show dump`.
- install.sh: drop DKMS/ndppd/TPROXY/Secure-Boot installer code (~250
lines) - an entire recurring class of installer fragility goes away.
- frontend: drop the now-meaningless routeThroughXray toggle (the relay is
always on); keep the field in the Zod schema, unexposed, so it isn't
silently stripped from stored settings on next save - two regression
tests deliberately depend on the Go struct still carrying it.
- docs/i18n: rewrite amneziawg.mdx for the new architecture; drop the
dead routeThroughXray translation keys across all 13 locales.
Real production throughput (embedded core datapath, isolated bench, same
box the kernel-module path was measured on): ~296 Mbit/s up, ~640 Mbit/s
down, vs. 414.69 MB/s (~3.3 Gbit/s) for the kernel module on the same
hardware - a real gap, tempered by this being single-stream/no-SOCKS5-hop
and most VPN traffic being latency-bound rather than throughput-saturating.
* fix(amneziawg): restore the branch's own Obfuscation31 shape + 2 CodeQL findings
The previous push's wholesale-copy of types.go/params.go from the fork's
main branch pulled in that branch's own independent (and incompatible)
naming for the same AWG 3.1 feature set: Obfuscation20/GenerateObfuscation20
instead of this branch's already-shipped Obfuscation31/GenerateObfuscation31,
and a missing CanonicalizeUintRange -- broke every Go CI job (the whole
matrix fails to compile when any one package doesn't, which is why govulncheck/
golangci/postgres-durable-first/race all failed identically, not just go-test).
Restores params.go/params_test.go verbatim from this branch's own last
commit (a strict superset of validation: it already cross-checks rekey vs.
reject timing windows, which the copied version never did) and folds the
3.0/3.1 fields (HeaderProtectionKey, ContentPaddingAddition, the 5 timing
fields, RandomTrailers/DisableCookies) into Obfuscation31 itself, matching
the original struct exactly instead of as separate top-level Instance
fields. instance.go, the two amneziawgnet call sites, and 7 amneziawgnet
test files updated to match. Also drops the one test (sanitizeConfigValue)
that only ever served the retired kernel-module .conf writer -- correctly
not ported, so the test testing it shouldn't have been copied either.
Also fixes 2 CodeQL findings the same push surfaced: a clamped uint64->int64
conversion for the new log view's live byte counters (server.go), and an
unneeded len+len sum feeding a slice pre-size in the v6-egress outbound
merge (xray.go) -- append already grows correctly without it.
* chore(amneziawg): regenerate frontend schemas for updated doc comments
npm run gen was missed after the previous commit's types.go doc-comment
edits (Obfuscation20 -> Obfuscation31, ValidateHeaderProtection ->
ValidateObfuscation in the prose) -- openapigen bakes those comments
into the generated schema's description field, so the committed
frontend/src/generated/schemas.ts and openapi.json still had the old
wording. codegen's git-diff-exit-code check caught it correctly.
* fix(amneziawg): narrow 2 test fixtures that collided with MaxForwardedPorts
TestCheckForwardedPortsConflict_CollidesWithEnabledInboundPort and
..._NoCollisionWhenPortsDontOverlap used "8000-8100"/"9000-9100" as their
ForwardedPorts fixture -- 101 ports each, one over MaxForwardedPorts (100).
The cap check (checkForwardedPortsConflict, added this session alongside
the SOCKS-phantom-port check) fires first, so both tests got "more than
100 forwarded ports" instead of ever reaching the collision logic they're
actually testing. The cap itself has its own dedicated boundary test
already; these two just needed a narrower range that still covers/misses
port 8080 as intended -- 8075-8085 and 9075-9085, 11 ports each.
* fix(amneziawg): checkAmneziawgnetSocksConflict had no receiver in its new home
My merge-conflict resolution kept this as a method call (s.checkAmneziawgnetSocksConflict)
inside checkPortConflictTx, a plain function with no *InboundService receiver --
upstream's #6225 fix moved the port-conflict check out of the (s *InboundService)
method and into this new tx-scoped free function, and I didn't notice the call
site needed to change shape too. CI caught it immediately (undefined: s); nothing
in this specific package can be locally verified past internal/database's own
unrelated, pre-existing CGO build issue on this dev machine.
Since the signature had to change either way, folded in the fix already flagged
as a separate follow-up: checkAmneziawgnetSocksConflict now takes the caller's
db handle instead of fetching its own via database.GetDB(), so it actually runs
inside the same serialized transaction #6225 introduced -- previously it sat
right next to that race fix without benefiting from it.
* fix: address the review findings on the embedded AmneziaWG PR
5 blocking findings:
- Floor S3/S4 at 12 in both obfuscation generators (Go and frontend) and
reject a hand-edited value below that when HeaderProtectionKey is set --
IpcSet requires it, and ~39% of previously-generated sets violated it
silently.
- Guard PrivateKey/PrimaryDNS/SecondaryDNS/remark against newline injection
in the AmneziaWG .conf builder (both the Go subscription-link path and
the frontend downloadable-config path) -- unguarded, any of them could
inject an arbitrary config line into a subscriber's client.
- Bound the derived AmneziaWG SOCKS relay port to <= 65535 once an
inbound's id is known, and check the reverse direction (does the relay
port collide with an existing inbound's port) on both create and update
-- previously only port -> relay collisions were checked, not relay ->
port.
- Gate injectAmneziawgV6Egress on the same V6AliasesActive predicate
desiredV6Aliases already uses, so the two can't disagree about whether a
peer's IPv6 identity is actually active at the OS level.
2 minor findings:
- Fix the forwarded-ports cap check's off-by-one (a spec covering exactly
the cap was rejected as if it were over it).
- Correct docker-compose.yml's stale comment describing the retired
DKMS/kernel-module architecture.
* chore: retrigger CI
build (armv5) failed on a transient Go module proxy network error
(INTERNAL_ERROR stream reset on sagernet/sing), unrelated to this PR's
changes.
* docs: fix doc comments still describing the retired DKMS/awg-quick design
A few doc comments (and one illustrative test log line) survived the
embedded-architecture cutover unchanged and now contradict the code
they sit next to:
- internal/amneziawg/types.go's package comment claimed this package
still owns a Manager that reconciles OS-level interfaces via
awg-quick/DKMS -- that Manager was removed; the reconcile loop lives
in internal/amneziawgnet now, and this package is protocol-shape-only.
- internal/amneziawg/params.go's ValidateObfuscation/ValidateConfigValue
comments cited "awg-quick up" / "awg-quick executes as root" as the
reason to validate -- the server itself never calls awg-quick in this
architecture; the same value still reaches a real rendered .conf that
a client app or an admin's own awg-quick CLI applies downstream, so
the validation is still warranted, just for a different consumer.
Mirrored the same fix in inbound_amneziawg.go's matching comment and
its test's comment.
- internal/amneziawgnet/manager.go's Manager doc comments (x3) pointed
readers at "internal/amneziawg.Manager" for comparison -- that type no
longer exists in this diff at all. Repointed at internal/mtproto.Manager,
the pattern this was actually modeled on and the one that's still real.
- Swapped one test's illustrative "awg-quick up awg2 failed" log line for
a message shaped like this architecture's actual amneziawgnet logging,
so a reader skimming the test doesn't wonder whether the server still
shells out to awg-quick.
No behavior change.
* fix(docs): re-run codegen for xray-settings.mdx after conflict merge
The automated conflict-resolution hand-merge for this generated file
was content-correct but didn't byte-match a real regen (different
YAML long-string folding style). Re-ran npm run gen + docs' gen:api
and kept that canonical output instead.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): drop the dead access-log email backfill
amneziawgEmailIndex keyed peers by "<tag>|<tunnel IP>", a scheme built
for the retired TPROXY bridge where the peer's decapsulated tunnel
address survived as the access log's from-address. The embedded
architecture relays through a loopback SOCKS5 dial, so every AmneziaWG
log line's from-address is 127.0.0.1:<ephemeral> and the lookup could
never match: the index was rebuilt on every log view just to miss.
Remove the index, its GetXrayLogs wiring and its test. If per-line
emails are wanted back, the relay would have to publish a
local-port->email registry for the viewer to resolve loopback sources.
* fix(api): generate AmneziaWGLogs/PeerActivity schemas instead of hand-writing them
The amneziawglogs endpoint's response structs were missing from
openapigen's StructAllow, so they were silently absent from every
generated schema/example, the endpoints.ts entry carried a hand-written
response, and AmneziaWGLogModal.tsx duplicated the shapes as local
interfaces - the exact drift the allowlist rule exists to prevent.
Allowlist both structs with example tags, point the endpoint at the
generated schema, import the generated types in the modal, and sync
docs/public/openapi.json.
* chore(amneziawg): drop the unreferenced quiccapture package
Nothing imports internal/amneziawg/quiccapture and no route exposes it;
its package doc justifies the code as a port of
frontend/src/lib/xray/i1Generators.ts, which does not exist in this
repository, and promises an API round-trip that also does not exist.
1,110 lines of unreachable code with misleading provenance claims.
Revert this commit to bring the package back when the live-capture I1
feature and its frontend counterpart actually land.
* fix(clients): re-run cross-inbound conflict checks on the serialized writer
The new client-level checks - cross-inbound AllowedIPs collisions and
AmneziaWG forwardedPorts conflicts - read a fresh DB snapshot, decide,
and only then enter runSerializedTx, while lockInbound only serializes
writers on the SAME inbound. Two concurrent client creates on two
different tunnel inbounds both passed the read and both committed,
yielding two peers with one address: the exact check-then-claim race
81cfd857 (#6225) closed for AddInbound, which this PR's own
checkAmneziawgnetSocksReverseConflict already cites. Keep the pre-tx
pass for fail-fast UX and re-validate inside the transaction, where the
single writer makes the answer authoritative. The race test drives two
goroutines at two inbounds and demands exactly one winner; it fails
with committed=2 when the in-tx re-check is removed.
* fix(amneziawg): hot-apply depletion disables like mtproto does
applyTrafficMutationBatch special-cases MTProto so a quota/expiry
depletion cuts the sidecar immediately, but AmneziaWG fell through to
runtime AddUser/RemoveUser - explicit no-ops for this protocol - so a
depleted peer kept tunneling until the next 10s reconcile tick. Route
it through applyLocalAmneziaWG, whose own contract (re-read committed
settings, filter depleted clients, push to the interface) is exactly
this case; the comment claiming it mirrors applyLocalMtproto is now
true for the depletion path too.
* fix(amneziawg): persist cleared DNS fields instead of resurrecting defaults
PrimaryDNS/SecondaryDNS marshaled with omitempty, so clearing them
persisted settings with no key at all - and the frontend re-parses
stored settings through a Zod schema whose .default('8.8.8.8') /
.default('8.8.4.4') fire on missing keys, silently repopulating the
form on every load and re-persisting the defaults on the next save.
Blank is a documented, meaningful state (no DNS line in client
configs); drop omitempty so a cleared value survives the round-trip.
The regression test normalizes a server block with cleared DNS and
fails when the keys are dropped.
* fix(amneziawg): accept cleared numeric obfuscation/subnet fields in the form
AntD InputNumber emits null when cleared, Zod .default() only replaces
undefined, and unlike wireguard.ts - whose optionalClearedInt comment
documents exactly this failure mode - the AmneziaWG schema declared
subnetCidr and jc/jmin/jmax/s1-s4 as bare z.number() defaults. Clearing
any of the eight fields made safeParse reject the null and block the
save until the user retyped a value. Absorb null into undefined while
keeping each field's schema default, so a cleared field refills its
documented default and legacy blobs with absent keys behave as before.
* fix(amneziawg): guard the third .conf emitter against newline injection
The review-round fix added the newline guard to amneziaWGConfigText (Go)
and buildAmneziaWGClientConfig, but genAmneziaWGConfig in inbound-link.ts
- the third of the three emitters its own comment says must not drift -
still rendered privateKey/primaryDns/secondaryDns/remark unescaped, so a
newline there injected a config line (e.g. a rogue PostUp) into the
inbound form's downloaded .conf. Add the same guard, plus the regression
tests the original fix shipped without: all four fields on the Go and
both frontend emitters go red if any guard is removed.
* test(amneziawg): pin the S3/S4 floors the TS drift guard claims to mirror
The test's docstring says it mirrors internal/amneziawg/params_test.go,
but it asserted S3>=8/S4>=4 while the Go test and both generators pin
12/12 - the floor ValidateObfuscation enforces whenever a header
protection key is set, which this generator always sets. A regression
narrowing the TS floors into 8-11/4-11 would have passed the drift
guard and produced configs the backend rejects on save.
* docs: restore the pia repo-map entry and document the AmneziaWG subsystem
Merging main dropped CLAUDE.md's internal/pia/ bullet (added by #6272)
while resolving the repo-map conflict - the package itself is untouched.
Restore it, add the missing map entries for the two packages this branch
introduces (internal/amneziawg/, internal/amneziawgnet/), bump the cron
count, and give amneziawg_job its row in architecture.md's 5.4 table.
* chore(amneziawg): correct comments stranded by the architecture pivot
ae77c7e9's cutover to the embedded gVisor path deleted the kernel-module
code but left several comments describing it in the present tense:
hot_diff.go cited the removed service.amneziawgEgressStreamSettings and
wrongly claimed AmneziaWG is the only sockopt.tproxy source (tunnel's
TProxy mode is the live one the guard protects), socks_config.go pointed
at the deleted EgressBasePort/EgressPortForInbound, manager.go referred
to the deleted Manager and its fingerprinting as live code, web.go's
cron registration claimed the job scrapes traffic (its own doc says it
does not), and types.go capped ContentPaddingAddition at uint16 when
validation and upstream both use uint32.
* style(lint): satisfy gofumpt/goimports so make verify is green
json_service.go's two 'Tag: "proxy"}' literals came in with main's own
cc245a90 formatting commit and fail the repo's gofumpt gate for everyone;
the import grouping in inbound_amneziawg.go is from the serialized-writer
fix on this branch.
---------
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
Co-authored-by: claude[bot] <41898282+claude[bot]@users.noreply.github.com>
* fix(install): preserve custom bin/ files (e.g. hand-added geoip) across updates
Every reinstall/update wipes /usr/local/x-ui/ wholesale and re-extracts
the release tarball, which only ships known assets (xray/mtg binaries,
the bundled geoip*/geosite*.dat sets). A user-reported real incident:
a hand-placed custom geoip file referenced from a routing rule via
"ext:<file>:<code>" got silently deleted on update, and Xray refused
to start at all afterward ("failed to open <file>: no such file or
directory"), taking down every inbound until the file was manually
restored from the user's own backup.
install_x-ui now backs up the old bin/ before the wipe and restores,
after extraction, only the files the fresh release doesn't provide --
bundled assets still get the newer per-release copy, nothing custom
silently disappears. Verified in isolation: standard files (geoip.dat,
the xray binary) end up as the fresh release's copy; a custom file
absent from the release survives untouched.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix: harden the bin/ snapshot-and-restore against the review round on #6152
- Replace the mktemp+cp snapshot with a same-filesystem mv of bin/ aside:
an unchecked mktemp failure previously made the very next line copy
bin/'s contents into "/" (empty custom_bin_backup + trailing slash),
and a silently-ignored cp failure (stderr redirected, exit code never
checked) could leave a truncated custom geo file that gets "restored"
as if it were intact. A rename is atomic and needs no extra disk space,
removing both failure modes at once; if it fails, back off cleanly and
say so instead of proceeding as if a backup exists.
- Add a trap so an interrupted update (Ctrl-C, signal) between the
backup and the restore doesn't leave the snapshot (which contains
bin/config.json and every mtproto client's FakeTLS secret) sitting
around indefinitely; the two exit-path cleanups this replaces are gone
since the trap now covers those exits too.
- Move the restore below the arm arch-rename/chmod block instead of
before it, so xray-linux-arm32/mtg-linux-arm already exist under their
final names and don't get needlessly restored-then-overwritten and
misreported as "custom".
- Exclude bin/config.json and bin/mtproto/*.toml from the restore: those
are the panel's own generated runtime state (internal/xray/process.go,
internal/mtproto/manager.go), not admin-placed files, and restoring a
stale one only resurrects dead state or recreates bin/mtproto/ with the
wrong (more permissive) directory mode.
- Match symlinks in the restore's find, not just plain files -- cp -a
already preserves them in the snapshot, but the restore loop was
silently dropping them, which is exactly the failure mode (a geo file
symlinked in from elsewhere) this PR set out to fix.
- Quote the two new xui_folder expansions.
- Extend the non-interactive smoke test to reinstall over an existing
install with a sentinel file in bin/, asserting it survives and that
the bundled geoip.dat is still the release's own copy -- the update
path this PR touches had no CI coverage at all before this.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
* fix (install.sh): use realpath instead of script name
###Description:
During arch() sctipt tries to delete itself in case no compatible arch found. This may lead to unexpected file deletion if executed outside root dir; also cur_dir is declared but doesn't seem to be used anywhere
###Way to reproduce:
```bash
cd "/some/other_dir_with_install_sh"
/3x-ui/project/dir/install.sh
```
* fix(install): quote the script path before the self-delete
realpath was handed an unquoted $0, so a script living under a path that
contains spaces was split into several arguments: realpath printed a
partial path plus an error, and rm -f then targeted a name matching
nothing at all. The unsupported-arch branch silently kept the script it
means to remove — the very case the surrounding fix exists for.
On networks with asymmetric routing (or proxies/multi-WAN), external
IP-echo services can return a transit or gateway address instead of the
server's real incoming IP, and every IP-certificate flow silently
issued for that wrong address. The x-ui.sh menu flow (option 20 -> 6)
and the install.sh/update.sh SSL menus now show the detected IPv4 for
confirmation (Enter keeps the old behavior), and declining falls into
the same validated manual-entry loop already used when every provider
fails. Non-interactive installs are untouched - XUI_SERVER_IP already
pins the address there.
Closes#5867
Pressing Enter at the 'Please choose which port to use (default is 80)' prompt left WebPort empty, and bash arithmetic treats an empty string as 0, so the out-of-range branch fired and printed 'Your input is invalid' even though the default was correctly applied. Handle empty input as accepting the default silently, and validate real input with a digits-only regex so non-numeric entries like '8x' get the invalid-input message instead of a bash arithmetic error. Applied to the identical prompt in x-ui.sh, install.sh, and update.sh.
Fixes#5829
The panel maps GOARCH=arm to "arm32" and launches bin/xray-linux-arm32,
but install.sh/update.sh renamed the release tarball's binary
(xray-linux-armv5/v6/v7) to xray-linux-arm. On armv7 boxes every update
downloaded a fresh Xray core into a name the panel never executes, so an
old correctly-named binary kept running forever, and a brand-new install
had no launchable Xray binary at all. Rename to arm32 to match the panel
(mtg stays plain "arm", matching internal/mtproto), and drop the stale
misnamed xray-linux-arm during updates like the existing amd64 cleanup.
Closes#5788
Fresh installs on Rocky/Alma/RHEL/Oracle failed twice (#5806):
- postgresql-setup --initdb ships a pg_hba.conf whose TCP rules use ident
auth, which matches the OS username against the Postgres role and always
rejects the randomly generated panel role, so the panel could never
connect ("Ident authentication failed"). Prepend password-auth rules
scoped to the panel database (first match wins; md5 also accepts
scram-stored verifiers) and reload, in both install.sh and the x-ui.sh
mirror.
- fail2ban only exists in EPEL on the RHEL family, but only the CentOS 7
branch enabled EPEL, so IP Limit setup failed with "No match for
argument: fail2ban". Enable epel-release (with the dl.fedoraproject.org
package as fallback for RHEL proper) before installing; Fedora ships
fail2ban in its own repos and is skipped.
Closes#5806
Installing or updating the panel on Arch/Manjaro/Parch performed a full
system upgrade (pacman -Syu) instead of only refreshing the package
database and installing the needed packages, unlike every other distro
branch (apt-get update, dnf makecache, zypper refresh, apk update).
Unrequested full upgrades can pull in kernel and system updates the
user never asked for. Align all pacman calls on the -Sy --noconfirm
form already used elsewhere in these scripts.
Closes#5810
* fix(script): download the live x-ui.sh script atomically before replacing it
update_menu(), update_shell(), and update.sh's update_x-ui() all overwrote
/usr/bin/x-ui in place via `curl -o`, truncating and rewriting the same
inode a currently-running x-ui process may still be reading from. A
network hiccup or slow write during that overwrite leaves a
half-old/half-new script on disk, which then fails with bogus syntax
errors on the next run. Download to /usr/bin/x-ui-temp and `mv -f` into
place instead, matching the atomic pattern install.sh already uses.
Also fixes update_menu() checking chmod's exit code instead of curl's,
which meant a failed download could still report "Update successful."
* fix(script): close remaining gaps in the atomic script-update path
Code review of the previous commit found the atomic mv fix was itself
incomplete:
- None of the mv -f calls checked their exit status, so a failed move
fell through to chmod and "success" messaging while /usr/bin/x-ui
stayed on the old file.
- update_shell()'s `[[ -s x-ui-temp ]]` guard couldn't tell "curl -z
got a 304, nothing to do" from "a stale temp file survived an
earlier crashed run" -- the latter could get moved into place with
no freshness check.
- update_menu(), update_shell(), and update_x-ui() all hardcoded the
same /usr/bin/x-ui-temp path, so two concurrent updates (e.g. a
cron auto-update racing an interactive menu update) could collide.
- update.sh's update_x-ui() was missing the non-empty-file guard
update_shell() already had.
x-ui.sh's update_menu() and update_shell() now share a
replace_xui_script() helper that uses a PID-suffixed temp path
(/usr/bin/x-ui-temp.$$), pre-cleans it before every attempt, and
checks the exit status of curl, the non-empty test, and mv before
treating the update as successful. update.sh's update_x-ui() gets the
same sequence inlined (it's fetched as a standalone script and can't
call x-ui.sh's function), closing the missing-guard gap and using its
own unique temp path.
* fix(script,panel): harden the remaining self-update download paths
install.sh had the same unguarded /usr/bin/x-ui-temp overwrite the two
already-fixed scripts had: no exit-status check on mv, and a fixed temp
name shared with x-ui.sh/update.sh's (now-unique) temp files. Give it
its own PID-suffixed temp path, an empty-file guard, and an mv
exit-status check, matching the pattern used there.
Audited the web dashboard's Go-native updater (panel.go) for the same
bug class: it already uses os.CreateTemp for a genuinely unique temp
file and cleans up via both a deferred Remove and a shell EXIT trap, so
it was never exposed to the fixed-path race. It was missing a check
for a zero-byte download (a 200 OK with an empty body would chmod +x
and exec an empty script) -- added that alongside the existing size
cap.
Not addressed here: once startUpdate()'s child process starts, the Go
service releases it and returns success immediately. If update.sh
fails partway through, the still-running old panel keeps answering
/status, so the frontend's poll can report success with no update
having happened. Fixing that needs update.sh to signal completion
status back and the frontend to check it -- a separate follow-up.
* feat(panel): report real completion status for the web self-update
Fixes the fire-and-forget gap flagged in the atomic-overwrite fix: once
startUpdate() launches update.sh detached, the Go service had no way to
learn whether it actually succeeded. If update.sh failed partway
(network drop, disk full, permission denied), the still-running old
panel kept answering /status, so the frontend's poll reported success
with nothing having changed.
update.sh now writes its outcome to a small JSON status file
(/etc/x-ui/update-status.json by default) via `trap ... EXIT`, which
covers every exit path in the script -- including the two bare `exit 1`
call sites that don't go through the existing _fail() helper. The Go
service generates a run ID before launching, passes it and the status
path to update.sh via XUI_UPDATE_RUN_ID/XUI_UPDATE_STATUS_FILE, and a
new GET /panel/api/server/getUpdateStatus endpoint reports it back. The
frontend now polls that instead of blindly trusting HTTP reachability,
and shows a distinct error or "couldn't confirm" message instead of
silently reloading into a false success.
Adversarial review of this surfaced three more issues, fixed here:
- No lock stopped two concurrent /updatePanel calls from launching two
update.sh runs that would race each other on the actual update work
(tar extraction, service unit swap). Added an in-memory guard with a
5-minute self-expiring window, so a run that never reaches a terminal
state doesn't lock out retries indefinitely.
- XUI_UPDATE_RUN_ID is read from the environment and was interpolated
unquoted into the status JSON; a malformed value would produce
invalid JSON. Now validated as digits-only before use.
- The run ID is a UnixNano timestamp (19 digits), sent as a raw JSON
number it would lose precision in JavaScript (past
Number.MAX_SAFE_INTEGER), letting two different runs round to the
same value on the wire and defeat the whole comparison. It's now a
decimal string end to end (Go, the status file, and the generated
frontend type).
install.sh's equivalent temp-file/mv path and the Go-native
downloadPanelUpdater() path were audited for the same bug classes
during this work; findings from that audit were addressed separately.
* fix(panel): release the update lock as soon as the run finishes
An exhaustive multi-angle review of the whole branch (12 finder angles,
3-vote adversarial verification, a fresh-eyes sweep) surfaced a real
bug in the concurrency guard added in the previous commit, plus several
smaller issues; this fixes what's actionable now.
The bug: acquireUpdateSlot only ever released on the 5-minute stale
timeout or if launching itself failed. If update.sh launched fine but
failed fast (bad GitHub API response, "x-ui not installed", any of its
early exit paths), the status file correctly reported "failed" within
seconds, but a retry was still rejected with "a panel update is
already in progress" for up to 5 more minutes -- the guard never
looked at the very status file this branch built to know a run was
done. It now tracks which run ID currently holds the slot and checks
that run's own status before falling back to the timeout, so a fast
failure clears the way for an immediate retry. Added a regression test
for this, plus one confirming a stale, unrelated runID can't be
mistaken for the current run finishing.
Also:
- Added a genuinely concurrent test for the guard: 200 goroutines
racing acquireUpdateSlot, asserting exactly one wins. The previous
tests only ever called it from one goroutine, so they gave no signal
if the mutex's check-then-set were silently broken -- verified this
by temporarily removing the lock and confirming the old tests still
passed while the new one caught it immediately under -race.
- Removed the redundant upfront "pending" status write: GetUpdateStatus
already defaults a missing/stale file to pending, and the frontend
matches by run ID regardless, so the write changed no observable
behavior. Deleted writeUpdateStatus entirely since that was its only
caller.
- Renamed replace_xui_script()'s unclear "conditional" parameter to
use_if_modified_since, matching what it actually controls.
- Added HTTP-level tests for the new getUpdateStatus endpoint,
including a regression test that the runId wire format is a JSON
string (decoding into a Go string field fails outright if it were
ever a bare number). updatePanel's actual launch path is not
covered: on a Linux test runner it would make a real network call
and could exec a real update.sh, so only its non-Linux guard path is
safely testable without mocking.
Not fixed here, tracked separately: the same unsafe-overwrite pattern
this branch eliminated for /usr/bin/x-ui is still present for the
systemd unit file install in update.sh and install.sh (lower severity
since systemd only reads it on daemon-reload, not continuously); and
startUpdate's systemd-run-vs-detached-fallback branching has no test
coverage since testing it safely needs dependency injection this fix
doesn't warrant bundling in.
* fix(script): make systemd unit file installation atomic
Same anti-pattern as the /usr/bin/x-ui overwrite fixed earlier: every
site that lands the systemd unit at ${xui_service}/x-ui.service --
copying it from the extracted release tarball, or falling back to a
GitHub download per distro family -- wrote straight onto the live
path via cp/curl, no temp file, no verification. A network drop
mid-download or an interrupted cp leaves the unit file truncated;
systemd then fails to parse it on the next daemon-reload/start,
leaving the panel unable to come up until an operator manually
re-copies a good unit file.
Lower severity than the /usr/bin/x-ui case (systemd only reads this
file on demand at daemon-reload time, not continuously the way bash
interprets a running script line by line), but it's the identical
gap, just left uncovered when that fix landed.
Added a small shared helper in both update.sh and install.sh --
_install_xui_service_unit() -- covering both source types (cp from
the tarball, curl from GitHub): write to a PID-suffixed temp file,
verify the copy/download succeeded and the result is non-empty, then
mv -f into place and check that exit status too, matching the pattern
already used for /usr/bin/x-ui. All 4 cp sites and the 3-way curl
fallback in each file now go through it; verified no other site
writes new content to the unit path (the remaining ${xui_service}
references are a pre-install existence check, an rm during old-version
cleanup, and the chown/chmod that already ran after the file is safely
in place -- none of those need atomicity).
Verified with bash -n on both files, plus a standalone scratch test
exercising cp-success, cp-with-missing-source, cp-with-empty-source,
and curl-failure paths: on every failure the previous, good unit file
content is left untouched and no temp file is leaked behind.
* fix(script): make Alpine's OpenRC init script install atomic; drop a stray comment
A final maximum-rigor review of the whole PR (12 finder angles including
a repo-wide sweep for any remaining instance of the bug class this PR
fixes) found two more real issues:
- Alpine's /etc/init.d/x-ui startup script is downloaded via a bare
`curl -fLRo` straight onto the live path in both update.sh and
install.sh -- the exact same unguarded-overwrite pattern already
fixed for /usr/bin/x-ui and the systemd unit file, just left
uncovered on the OpenRC side. A network drop mid-download truncates
the live init script; OpenRC then fails to source/execute it on the
next start, leaving the panel unable to come up. Fixed with the same
temp-file + non-empty check + mv -f (with its own exit-status check)
pattern used everywhere else in this PR. Verified with bash -n and a
standalone scratch-script test covering success, empty-download, and
destination-preserved-on-failure paths.
- internal/web/service/panel/panel_test.go had one line-level `//`
comment on a call site, which the root CLAUDE.md's hard rule ("No //
line comments in committed Go/TS... rename instead of annotating")
explicitly prohibits. The comment duplicated context already stated
in the test's own doc comment two lines above, so it's simply
removed rather than reworded.
Also flagged, deliberately not bundled here since it's a different
subsystem: x-ui.sh's update_geofiles() downloads Xray's live
geoip.dat/geosite.dat with the same unguarded curl -o pattern. Tracked
as its own follow-up.
* fix(script): make geo-data file downloads atomic
Same anti-pattern as /usr/bin/x-ui, the systemd unit file, and the
Alpine init script fixed in prior PRs: update_geofiles() downloaded
Xray's live geoip.dat/geosite.dat (and the IR/RU variants) with curl
writing straight onto the exact path Xray reads at runtime
(internal/xray/process.go's GetGeoipPath/GetGeositePath), no temp
file, no verification. The existing check only inspected the reported
HTTP status via -w '%{http_code}', not file integrity, so a network
drop mid-download could leave a truncated .dat file on disk that
passes the status check. Xray then fails to parse it on the next
restart/reload, breaking any routing rules that reference geoip:/
geosite:.
The -z conditional-GET usage needed care here: the original code
pointed both -z and -o at the same live path. Fixed by pointing -z at
the live file (to keep the "already current" freshness check) while
-o writes to a PID-suffixed temp file, matching the pattern already
proven in x-ui.sh's replace_xui_script(). Verified with a local HTTP
server that a 304 response leaves the temp file untouched/nonexistent
(so the existing "already up to date" branch still works unchanged),
and added a non-empty check plus a checked mv -f before treating a
download as installed.
Verified with bash -n and an end-to-end scratch test against a local
server covering: fresh download, 304-not-modified, empty response
body, and a 404 -- confirming a failure at any stage leaves the
previous good .dat file completely untouched and no temp file behind.
* fix(script): verify the release tarball extraction, not just the download
The final maximum-rigor review found the most significant remaining gap
in this whole effort: update.sh and install.sh check the tarball
download's exit status, but never check tar's exit status, and never
verify the extracted x-ui binary actually exists before continuing.
Worse, by the time extraction runs, the previous installation has
already been stopped and deleted -- there's no rollback. A truncated
download that still passes curl's own check, or a tar failure (disk
full, killed process), left the panel silently in a broken half-state:
chmod/config/service-install all continued to run against a missing or
empty binary, with no error surfaced anywhere. This is the same bug
class as everything else in this PR (unverified write to a path
something then depends on), just for the tarball itself rather than a
single file -- and it also covers the geo-data files this PR already
fixed once for the interactive/cron path, since they ship inside this
same tarball on every panel update.
Added: a non-empty check on the downloaded archive (both files, both
install.sh call sites) and a check that tar succeeded and produced a
non-empty x-ui binary before proceeding, failing loudly with a message
that explicitly says the previous install is already gone, since
silently continuing here is worse than anywhere else in this PR.
This doesn't make the multi-file extraction fully atomic (that would
mean extracting to a temp directory and atomically swapping the whole
install tree into place, a materially larger restructuring than
anything else in this PR) -- but it closes the "fails silently, user
discovers it days later when Xray can't start" gap, which was the
actual reported problem this whole effort traces back to.
Also fixed, all much smaller:
- replace_xui_script() in x-ui.sh implicitly returned chmod's exit
status instead of success, so a successful atomic install could be
reported as failed if chmod transiently failed after the mv already
landed the new script. Added an explicit `return 0`.
- update_geofiles() had no default case branch; an unrecognized
argument would silently reuse whatever dat_files/dat_source values a
previous call left in the un-scoped globals instead of failing.
Currently unreachable (all three call sites pass fixed literals) but
cheap, defensive, and worth having.
- internal/web/controller/server.go's updatePanel has one branch (an
unparseable "dev" form value) that's both untested and safe to test
on any platform, since it's rejected before any real exec/network
call. Added the missing test case.
Verified: bash -n on all three scripts; an empirical scratch test
covering an empty downloaded archive, a corrupt (non-gzip) archive,
and a successfully-extracting-but-empty archive, confirming each is
caught before the script proceeds; full go build/vet/test -race
across the whole module; frontend generation confirmed still in sync.
* fix(panel): base the update-slot staleness fallback on process liveness
Addresses the automated review on the upstream PR (MHSanaei/3x-ui#5711).
Blocking finding: acquireUpdateSlot's staleness fallback freed the
update slot purely on elapsed wall-clock time (5 minutes), with no
check on whether the update.sh process it launched was actually still
running. update.sh runs install_base() (apt-get/dnf/pacman update and
install) before update_x-ui even starts, plus several GitHub
downloads (release tarball, x-ui.sh, and possibly a service unit or
x-ui.rc) -- on a slow or throttled host, a small VPS being the typical
deployment target for this project, that alone can plausibly exceed 5
minutes with nothing wrong. A second /updatePanel call arriving in
that window (an admin retrying after the frontend's 90s poll times
out, or overlapping master-node bulk-update calls) would launch a
second update.sh, racing the exact rm/tar/mv/systemctl sequence this
whole PR exists to make safe.
Fixed by recording the launched process's PID (detached-fallback path
only; the systemd-run path's own process has already exited by the
time startUpdate returns, so it never learns update.sh's real PID) and
checking it via the standard POSIX kill(pid, 0) liveness probe before
treating a run as stale, following the existing panel_unix.go /
panel_other.go platform-split pattern already used for
setDetachedProcess. A confirmed-alive process now keeps the slot held
past updateStaleAfter (raised from 5 to 20 minutes as a safer baseline
for the systemd-run path, which still has no way to check liveness
directly). updateHardCeiling (2 hours) is an absolute backstop so a
genuinely wedged run can never lock out retries permanently even on
the PID-tracked path.
Added two regression tests exercising the new logic (gated to Linux,
since processAlive is a no-op stub elsewhere): a live PID keeps the
slot held past the stale window, and the hard ceiling overrides
liveness. Traced both by hand against the new acquireUpdateSlot logic;
could not execute-verify processAlive itself on this Windows dev
machine (no WSL distro installed, and installing one felt
disproportionate to validate kill(pid, 0), an extremely well-established
POSIX primitive), but cross-compiled clean for linux/amd64 and this
repo's CI runs the real test suite on Linux.
Also fixed, both suggestions from the same review:
- install.sh: two failure paths right after tarball extraction were
exiting without cleaning up the already-downloaded x-ui.sh temp file
(xui_script_temp), leaving it behind. Every other new failure branch
in this PR removes its temp file before exiting; these two now do
too.
- frontend/src/pages/api-docs/endpoints.ts: updatePanel's doc entry
did not reflect that a successful response now carries an obj with
runId. Added an inline response example matching the existing
pattern used for other ad hoc (non-schema-backed) responses like
getWebCertFiles.
Verified: go build/vet clean on both windows (native) and a linux/amd64
cross-compile; full go test ./... clean; go test -race on the panel
and controller packages; bash -n on all three shell scripts; npm run
gen confirms the openapi.json diff is exactly the new response example
with no stray changes to src/generated; TestAPIRoutesDocumented still
passes.
acme.sh guards every non-install command behind _checkSudo: when a
non-root user runs the panel scripts via sudo, it prints the sudo wiki
warning and exits before doing anything, unless FORCE is set. All our
--issue calls already pass --force and were unaffected, but none of the
--installcert calls did, so issuance succeeded and installation then
aborted silently, ending in "Certificate files not found after
installation". FORCE has no other effect on the installcert path, so
mirror the --issue calls and pass --force everywhere we install certs.
Closes#5741
install.sh now accepts `dev-latest` (or `dev`) to install the rolling per-commit dev pre-release, bypassing the numeric version-floor check.
README.md documents the version-pinned and dev-latest install commands. All six language READMEs are brought back in sync with the English source: the new install instructions plus the previously-missing "Unattended install & cloud images" section, the XUI_TUNNEL_HEALTH_* env vars, and the custom subscription templates link.
IP limit enforcement is gated on fail2ban being present (ce8b1bed), but the bare-metal install.sh/update.sh never installed it, so the feature stayed disabled until the user ran the IP Limit menu by hand. Docker already auto-configures it; bare-metal hosts did not.
Extract the fail2ban install + jail setup out of install_iplimit into a non-interactive setup_fail2ban_iplimit() (no exit/before_show_menu, returns a status) exposed via 'x-ui setup-fail2ban', and call it from install.sh and update.sh after the panel is up. update.sh is the primary update path (x-ui update and the panel self-updater both run it). Honors XUI_ENABLE_FAIL2BAN (proceed only when unset or true, matching the Go gate) and is non-fatal so a fail2ban failure never aborts the install/update.
The first-boot smoke test and install.sh fetched the released binary with
a single curl attempt, so a transient GitHub/CDN 504 failed the whole job.
- smoke-firstboot.sh: add --retry/--retry-all-errors with connect/max
timeouts to the version API and tarball downloads, split the download
into a guarded step, and assert the tarball is non-empty.
- install.sh: add --retry plus connect/max timeouts to the release-binary
downloads and version lookups. Omit --retry-all-errors here for curl
< 7.71 (Ubuntu 20.04 / Debian 10 / CentOS 7) compatibility; plain
--retry already covers 504 and other transient errors.
* feat(install): add non-interactive install path for cloud/golden-image use
Trigger non-interactive mode when XUI_NONINTERACTIVE=1 or stdin is not a
TTY (curl | bash, cloud-init). Every prompt is then replaced by an env var
or a sane default; interactive prompts stay byte-for-byte identical.
Honored env vars: XUI_USERNAME, XUI_PASSWORD, XUI_PANEL_PORT,
XUI_WEB_BASE_PATH (unset => random, as before), XUI_SSL_MODE=none|ip|domain
(default none), XUI_DOMAIN, XUI_ACME_EMAIL, XUI_DB_TYPE/XUI_DB_DSN, plus
additive XUI_ACME_HTTP_PORT, XUI_SSL_IPV6, XUI_SERVER_IP.
On success, write /etc/x-ui/install-result.env (mode 600) with the panel
creds + access URL + api token, in both interactive and non-interactive
modes, so cloud-init/MOTD can surface them. Postgres in non-interactive
mode requires XUI_DB_DSN or installs locally; never silently downgrades.
* feat(deploy): add first-boot per-instance credential generation
Golden images ship with no x-ui.db. x-ui-firstboot.sh runs once (guarded by
/etc/x-ui/.firstboot-done), before x-ui.service, and replaces the seeded
admin/admin with fresh random username/password on a random high port,
regenerates the session secret/panel GUID via 'x-ui setting -reset', mints an
API token, and writes the creds to /etc/x-ui/credentials.txt (600) + /etc/motd.
Idempotent: skips regeneration if a non-default admin already exists. The
oneshot unit is ordered After=network-online/cloud-init and Before=x-ui.service
so the panel never serves default credentials.
* chore(deploy): force LF for cloud-image deploy assets (.service/.hcl/.yaml)
* feat(deploy): add Packer config + provisioning scripts for golden image
One build, two sources: amazon-ebs (AWS AMI, Canonical Ubuntu 24.04 base via
source_ami_filter) and qemu (qcow2 + raw, NoCloud-seeded for build-time SSH).
Provisioner order is fixed: provision.sh -> harden.sh -> cleanup.sh.
- provision.sh: downloads the released x-ui tarball (no Go build), installs the
panel + firstboot unit, enables but does NOT start services, creates NO DB.
- harden.sh: key-only SSH, no root password login, locks default account
passwords, enables unattended-upgrades (scanner-compliant).
- cleanup.sh: wipes any DB/creds, SSH host keys, authorized_keys, machine-id,
cloud-init state, logs and history; fails the build if any secret survives.
packer fmt -check clean; packer validate passes for both sources.
* feat(deploy): add generic cloud-init user-data for unattended install
cloud-init.yaml installs the latest 3x-ui non-interactively (XUI_NONINTERACTIVE=1)
on any cloud-init platform, generating unique per-instance credentials and
surfacing them via /etc/x-ui/install-result.env, serial console and MOTD.
README documents per-provider usage (Hetzner/AWS/DO/Vultr/GCP/Azure/Oracle)
and all XUI_* knobs.
* ci: add image.yml to build cloud images on release
On release: published (or workflow_dispatch with a tag), waits for the
x-ui-linux-amd64.tar.gz asset (handles the release-matrix upload race), then:
- qemu-image (always): builds the qcow2 with Packer and attaches a compressed
.qcow2.xz + sha256 to the GitHub release. Uses KVM when /dev/kvm exists,
else TCG.
- ami-image (gated): builds the AWS AMI only when AWS creds exist (OIDC role
preferred, else access keys), so forks skip cleanly. Prints the AMI ID to the
job summary. No secrets or AMI IDs are committed.
* test(deploy): add container smoke tests for install + firstboot
smoke-noninteractive.sh: runs install.sh piped (no TTY) with
XUI_NONINTERACTIVE=1 in an Ubuntu container; asserts install-result.env (600)
holds random non-default creds, hasDefaultCredential is false, and the panel
serves HTTP.
smoke-firstboot.sh: installs the released binary with no DB, runs
x-ui-firstboot.sh; asserts per-instance creds + credentials.txt (600) + MOTD,
no admin/admin, and that a second run is a no-op (sentinel honored).
smoke.yml runs both as gated jobs on PRs/pushes touching install.sh or deploy/**.
Both pass locally against the v3.3.1 release binary.
* docs(deploy): add Packer/marketplace docs and link from README
- deploy/README.md: index of the cloud-deploy tooling and the two models
- deploy/packer/README.md: how to build locally, variables, first-boot behavior
- deploy/marketplace/aws/README.md: seller registration -> AMI scan ->
limited-visibility preview -> go-public checklist
- deploy/marketplace/hetzner/README.md: cloud-init-first guidance + snapshot
caveat (delete x-ui.db first) + hetznercloud/apps reference
- README.md: link the unattended-install / cloud-image docs from Quick Start
* feat(deploy): build golden images for arm64 as well as amd64
The install path was already multi-arch (install.sh auto-detects arch); this
extends the golden image + CI to arm64:
- packer: xui_arch (amd64|arm64, validated) now derives the base AMI filter and
the Ubuntu cloud image; the qemu source switches to qemu-system-aarch64 + virt
machine + AAVMF UEFI firmware for arm64. amd64 path unchanged.
- image.yml: arch matrix. AMIs for amd64 (t3.small) + arm64 (t4g.small/Graviton)
from one runner; qcow2 for amd64 on a standard runner and arm64 on a native
ubuntu-24.04-arm runner. Waits for both release tarballs.
- smoke.yml: run install + firstboot smoke tests on amd64 and arm64 runners;
smoke-firstboot.sh now resolves the arch tarball via dpkg.
- docs updated for both arches.
packer fmt/validate pass for amd64 and arm64; actionlint + shellcheck clean.
Verified locally: non-interactive install AND firstboot run on the real arm64
release binary under emulation (ELF aarch64, no admin/admin).
* chore(deploy): default AWS region to eu-central-1 (Frankfurt)
Replace the us-east-1 fallback in image.yml (4 sites) and the Packer 'region'
default + doc examples. Still overridable via the AWS_REGION repo variable / the
-var 'region=...' flag.
* feat(deploy): add Amazon Lightsail support (launch script + snapshot builder)
Lightsail can't launch from an EC2 AMI and its blueprint list isn't
self-publishable, so add the two self-service paths instead:
- launch-script.sh: paste into Lightsail 'Add launch script' (or --user-data) to
install 3x-ui non-interactively with unique per-instance credentials.
- snapshot-userdata.sh + build-snapshot.sh: AWS CLI pipeline that provisions a
build instance (panel installed, NO DB, firstboot enabled), runs the shared
cleanup.sh, then snapshots it. Instances launched from the snapshot mint their
own credentials on first boot. Optional --panel-port pins a known port for the
Lightsail firewall.
- README documents both paths, the firewall caveat, and the blueprint reality.
EC2 AMI / Marketplace path kept untouched alongside. All scripts shellcheck-clean.
* fix(deploy): address Copilot PR review findings
- install.sh + firstboot: write install-result.env / credentials.txt values with
printf %q so the files stay safe to source even if creds are pinned with shell
metacharacters (no-op for the alphanumeric random defaults).
- firstboot: fail closed if 'x-ui setting -show' can't be parsed to true/false —
exit without writing the sentinel so the next boot retries, instead of silently
skipping regeneration and risking admin/admin.
- firstboot + cloud-init + lightsail launch-script: keep secrets out of the
world-readable /etc/motd (show URL + username only; full creds via the mode-600
file / serial console).
- lightsail build-snapshot: handle download-default-key-pair returning either a
PEM or base64, and assert a valid PEM before using it for SSH.
- image.yml: pin hashicorp/setup-packer@v3 (was @main).
- deploy/README: document XUI_ACME_HTTP_PORT / XUI_SSL_IPV6 / XUI_SERVER_IP.
Both container smoke tests still pass; shellcheck + actionlint clean.
- Issue acme.sh HTTP-01 over IPv4 unless the host has no global IPv4
address: the hardcoded --listen-v6 started a v6-only standalone
listener, so validation of a domain whose A record points at this
host always failed (#4994).
- Add a custom cert/key path option to the "Set Cert paths" menu so
certificates living outside /root/cert (e.g. certbot under
/etc/letsencrypt) can be wired to the panel from the CLI (#5010).
- Derive the displayed Access URL from the certificate's actual SAN
list instead of the cert folder name, list the other covered names,
and show the panel's custom-path certificate in "Show Existing
Domains" (#5070). Also silence find when /root/cert doesn't exist.
* fix(logs): render journalctl output in the SysLog viewer
The log viewer's parseLogLine only understood the app-log format
(2006/01/02 15:04:05 LEVEL - body). With SysLog ticked the backend
returns journalctl lines (Mon DD HH:MM:SS host ident[pid]: LEVEL - body),
so the parser mistook the journal time for the level and dropped the
body, leaving only timestamps. Detect and strip the journald prefix,
keep the journal timestamp as the stamp, then parse the real level and
body from the remainder.
* feat(mtproto): surface mtg output and add status reporting
mtg's stdout/stderr was captured by a writer that kept only the last
line and showed it nowhere, so the reason a proxy could not reach
Telegram was invisible. Stream mtg output line-by-line into the x-ui
log, tagged per inbound, so it appears in the panel log viewer and
journald.
Also fix mangled log lines: logger.Info uses fmt.Sprint, which drops
the space between adjacent string operands, producing output like
'inbound3on0.0.0.0:8443'. Switch the affected mtproto calls to the
formatted (*f) variants.
Add show_mtproto_status to x-ui.sh so 'x-ui status' reports each
mtproto inbound's mtg process state and bind address.
* fix(logs): parse all journalctl message shapes in SysLog viewer
Real journalctl output mixes four message shapes after the
'Mon DD HH:MM:SS host ident[pid]:' prefix: go-logging 'LEVEL - msg'
(x-ui/xray), Go std-log with an embedded date (net/http, runtime),
telego's '[timestamp] LEVEL msg', and systemd lines. The viewer only
understood the first, so std-log and telego lines — which never contain
' - ' — collapsed to a bare timestamp (e.g. the 8s telego 409 spam).
Extract the parser into a pure, testable module and teach it the other
shapes: strip the redundant Go std-log date, lift the level out of
telego brackets, and always keep the message body. Add a unit test
covering each shape with real captured lines.
* fix(mtproto): reap orphaned mtg sidecars so a stale one can't break new clients
On Linux x-ui does not kill its mtg children when it dies (no kill-on-exit,
unlike the Windows job object). After a crash, OOM, kill -9, or update, a
stale mtg keeps holding the inbound port with an OLD secret, so new clients
fail the FakeTLS handshake and get silently domain-fronted to the fakeTLS
domain instead of proxied to Telegram (a few MB of traffic, never connects).
Sweep orphans at startup: on the first reconcile, before x-ui starts any of
its own mtg, scan /proc and SIGKILL any process whose executable is our
mtg-<goos>-<goarch> binary. x-ui is the sole owner of mtg, so anything alive
then is an orphan. Runs once per process (swept guard), survives the
binary-deleted-during-update case via /proc/<pid>/cmdline, and is a no-op on
Windows (job object) and other platforms.
Also clear stray mtg in update.sh/install.sh after stopping x-ui, anchored to
the 'mtg-linux-<arch> run ' invocation so the pattern can't match unrelated
command lines (e.g. x-ui.sh's own 'grep mtg-linux').
* fix(logs): drop dead body initializer flagged by eslint no-useless-assignment
* fix(mtproto): drop remark fragment from tg://proxy export link
The mtproto export link appended the inbound remark as a URL fragment
(tg://proxy?server=...&port=...&secret=...#remark). Telegram Desktop
rejects a proxy deep link with a trailing fragment as 'This proxy link
is invalid', breaking one-click import, and a remark is meaningless for
proxy links across clients. Stop adding it in both the panel link
(genMtprotoLink) and the subscription service. Fixes#5105.
* fix(x-ui.sh): remove unused check_mtproto_status helper
show_mtproto_status does its own process check, so check_mtproto_status
was dead code. Drop it (per Copilot review on #5107).
* feat(mtproto): add MTProto (FakeTLS) protocol via managed mtg sidecar
Xray-core has no mtproto proxy, so mtproto inbounds run as standalone
mtg (9seconds/mtg) sidecar processes managed by the panel — one per
inbound — and are excluded from the generated Xray config entirely.
- model: MTProto protocol constant, validator, and FakeTLS secret
helpers (GenerateFakeTLSSecret/HealMtprotoSecret)
- mtproto package: per-inbound mtg process manager with reconcile,
graceful stop, and best-effort Prometheus traffic scraping
- runtime: delegate mtproto inbounds to the mtg manager instead of the
Xray gRPC API; skip mtproto when building the Xray config
- web: boot reconcile + StopAll wiring, periodic reconcile/traffic job,
port-conflict transport, secret healing on inbound add/update
- sub: tg:// proxy share-link generation
- frontend: protocol option, Zod schema, Protocol tab (FakeTLS domain +
regenerable secret), info-modal link, and i18n
- provisioning: fetch mtg v2.2.8 in install.sh, DockerInit.sh, and the
Linux + Windows release workflows
* fix
* fix
* fix: address Copilot review comments on mtproto PR
- web/web.go: create NewMtprotoJob once and reuse for cron + initial run
- mtproto/manager.go: StopAll cleans up per-inbound config files on shutdown
- mtproto/manager.go: CollectTraffic releases mutex before HTTP scrapes to
avoid blocking Ensure/Reconcile/Remove during network I/O
- database/model/model.go: panic on crypto/rand failure in mtprotoRandomMiddle
instead of silently producing a weak all-zero secret
- install.sh: fix chmod to handle renamed bin/mtg-linux-arm on armv5/v6/v7
- Cleanup on issuance/install failure now also removes the acme.sh
${domain}_ecc (and ${ip}_ecc) directory, not just ${domain}, so a
failed run no longer leaves partial state behind.
- The 'existing certificate' check only reuses a cert when its
fullchain.cer and key files are actually present and non-empty;
otherwise the broken state is removed and issuance proceeds. This
fixes the 0-byte fullchain.pem produced by reusing failed state.
- Menu option 5 (set cert paths) now registers the acme.sh --installcert
hook with --reloadcmd 'x-ui restart' when acme.sh knows the domain, so
auto-renewal copies the renewed cert and reloads the panel.
Two PostgreSQL gaps on the panel:
1. x-ui setting and other CLI subcommands read XUI_DB_TYPE/XUI_DB_DSN from
the process environment, which systemd injects via EnvironmentFile but a
plain shell invocation does not. On a PostgreSQL install the CLI silently
fell back to SQLite, so changes made from the management menu never
reached the panel's database. Load the systemd EnvironmentFile
(/etc/default/x-ui and distro equivalents) at startup; godotenv.Load does
not override existing vars, so it stays a no-op for the managed service.
2. DB backup/restore (panel endpoints and the Telegram bot) only handled the
SQLite file, so on PostgreSQL Back Up returned a stale/absent x-ui.db and
Restore silently did nothing. Add pg_dump/pg_restore based backup/restore:
- GetDb/ImportDB run pg_dump (custom format) / pg_restore, passing
credentials via the PG* environment instead of argv.
- getDb downloads x-ui.dump on Postgres, x-ui.db on SQLite.
- Telegram backup sends the matching file via GetDb.
- BackupModal shows a Postgres note and accepts .dump; the dist page
injects window.X_UI_DB_TYPE; new strings translated for all locales.
- install.sh installs postgresql-client for the external-DSN path and
points the user to in-panel Backup & Restore.
Closes#4658
* feat(install): random PostgreSQL role + post-install credentials display
The local-Postgres installer used to bake in a static role name (`xui`)
and only printed `PostgreSQL (xui@127.0.0.1:5432/xui)` at the end of
install, leaving operators without the random password or any hint of
how to connect from the shell.
Two changes:
- install_postgres_local now generates an 8-char random role name
alongside the random password, and double-quotes identifiers in the
CREATE/ALTER statements (a random alphanumeric may start with a digit,
which Postgres rejects for unquoted identifiers).
- After a successful local install, a dedicated "PostgreSQL Credentials"
block is rendered in the summary — DB / user / pass / host / port /
DSN / env-file path, plus ready-to-paste psql commands for both the
postgres superuser and the new role. Credentials cross the subshell
boundary via a 0600 tmpfile (PG_CRED_FILE) that the parent shell
sources and unlinks; the PG_* vars are unset after display.
Only fires for the local-install flow; the external-DSN path is
unchanged.
* fix(install): address Copilot review on Postgres install flow
- Use mktemp (unguessable, 0600) instead of /tmp/x-ui-pg-creds.$$ and
cleanup in both success and failure paths to close the symlink/race
attack on the predictable filename.
- In install_postgres_local, capture the prior umask and restore it
after writing PG_CRED_FILE; return 1 if the write fails so the
caller does not source nothing and label the install with empty
PG_* vars.
- On reinstall, reuse the existing xui DB owner instead of generating
a fresh role each run, so existing tables stay accessible after a
re-run; only the password is rotated. Falls back to a fresh random
role when the DB does not exist or is owned by postgres.
* feat(install): prompt for SQLite vs PostgreSQL during install
* fix(install): write env file to per-distro path and handle pg-install failure
The env file was hardcoded to /etc/default/x-ui, but RHEL/Fedora units read
/etc/sysconfig/x-ui, Arch reads /etc/conf.d/x-ui, and Alpine OpenRC auto-
sources /etc/conf.d/x-ui. PostgreSQL selection was silently dropped on every
distro except Debian. Also initdb on openSUSE (service wouldn't start) and
prompt the operator on local-install failure instead of silently demoting
to SQLite.
* fix(scripts): make x-ui.sh and update.sh PostgreSQL-aware
update.sh ran setting -show and migrate without sourcing the env file, so
PostgreSQL users had migrations applied to the SQLite default and settings
introspection read the wrong DB. Sourcing the per-distro env file at the
start of update_x-ui exports XUI_DB_TYPE/XUI_DB_DSN to all binary calls.
x-ui.sh now shows the active backend in View Current Settings (password
masked) and removes the env file on uninstall so a later reinstall doesn't
inherit a stale DSN.
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
* feat: add API token to install output
Add -getApiToken flag to the setting subcommand so shell scripts
can retrieve the panel API token. Include the token in the
install.sh completion banner for automation/deployment use.
* fix(install): adapt -getApiToken CLI to multi-token service
settingService.GetApiToken was removed when API tokens moved to a
multi-row ApiTokenService. Switch the install-time CLI to list tokens
and create one named "install" if none exist, preserving the
`apiToken: <value>` output the install.sh grep depends on.
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
Adds a 4th choice to the install-time SSL prompt for users who terminate
TLS elsewhere (nginx, Caddy, Traefik) or only reach the panel through an
SSH tunnel — closes#3802.
- Option 4 prints a clear warning, then optionally binds the panel to
127.0.0.1 via `x-ui setting -listenIP` so it's unreachable from the
public internet
- When the user binds to 127.0.0.1, print the same SSH port-forwarding
command set that x-ui.sh's SSH_port_forwarding() already shows, so
remote access is one ssh -L away
- Track SSL_SCHEME so the final "Access URL:" line shows http:// when
SSL is skipped, instead of misleadingly advertising https://
- Soften the section header from "(MANDATORY)" to "(RECOMMENDED)" and
print "SSL Certificate: Skipped" when option 4 is chosen
- Rework the SSL menu copy to a parallel "verb — what (constraint)"
shape with a single Tip line focused on option 4's risks
Try six IPv4 providers in turn, accept only HTTP 200 + IPv4-shaped body,
and prompt the user to enter their IP if every provider fails.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat: implement real-time traffic monitoring and UI updates using a high-performance WebSocket hub and background job system
* feat: add bulk client management support and improve inbound data handling
* Fix bug
* **Fixes & Changes:**
1. **Fixed XPadding Placement Dropdown**:
- Added the missing `cookie` and `query` options to `xPaddingPlacement` (`stream_xhttp.html`).
- *Why:* Previously, users wanting `cookie` obfuscation were forced to use the `header` placement string. This caused Xray-core to blindly intercept the entire monolithic HTTP Cookie header, failing internal padding-length validations and causing the inbound to silently drop the connection.
2. **Fixed Uplink Data Placement Validation**:
- Replaced the unsupported `query` option with `cookie` in `uplinkDataPlacement`.
- *Why:* Xray-core's `transport_internet.go` explicitly forbids `query` as an uplink placement option. Selecting it from the UI previously sent a payload that would cause Xray-core to instantly throw an `unsupported uplink data placement: query` panic. Adding `cookie` perfectly aligns the UI with Xray-core restrictions.
### Related Issues
- Resolves#3992
* This commit fixes structural payload issues preventing XHTTP from functioning correctly and eliminates WebSocket log spam.
- **[Fix X-Padding UI]** Added missing `cookie` and `query` options to X-Padding Placement. Fixes the issue where using Cookie fallback triggers whole HTTP Cookie header interception and silent drop in Xray-core. (Resolves [#3992](https://github.com/MHSanaei/3x-ui/issues/3992))
- **[Fix Uplink Data Options]** Replaced the invalid `query` option with `cookie` in Uplink Data Placement dropdown to prevent Xray-core backend panic `unsupported uplink data placement: query`.
- **[Fix WebSockets Spam]** Boosted `maxMessageSize` boundary to 100MB and gracefully handled fallback fetch signals via `broadcastInvalidate` to avoid buffer dropping spam. (Resolves [#3984](https://github.com/MHSanaei/3x-ui/issues/3984))
* Fix
* gofmt
* fix(websocket): resolve channel race condition and graceful shutdown deadlock
* Fix: inbounds switch
* Change max quantity from 10000 to 500
* fix
Replace simple curl+trim checks with a response+http_code parse to ensure the remote URL returns HTTP 200 and a non-empty body before assigning server_ip. Changes applied to install.sh, update.sh and x-ui.sh: use curl -w to append the status code, extract http_code and ip_result, and only set server_ip when http_code == 200 and ip_result is non-empty. This makes the IP discovery more robust against error pages or partial responses while keeping the existing timeout behavior.