In an LXC container with LXCFS the Overview showed the container's RAM
beside the host's swap, the host's CPU topology and a CPU percentage from
the host's view. Swap and uptime now come from LXCFS's virtualised files
and CPU from the container's cgroup v2 counter, normalised by the visible
vCPUs and any quota; container CPU and swap history is kept apart from
the earlier host samples.
A value the reader cannot measure (the first CPU sample, or a layout it
cannot verify such as cgroup v1) is reported as unavailable instead of 0:
the dashboard, the node list, node CPU history and the Telegram and
Discord uptime show a dash, and nodes keep the flags in a new
unavailable_metrics column.
Deleting the only host a client was bound to blanked that client on every
inbound. Once the host row was gone, the binding could no longer say which
inbound it guarded, so it failed closed everywhere: a client on inbounds A
and B, bound to one host on A, lost B's link the moment that host was
deleted, and nothing in the panel hinted at it.
Every host delete (host groups, the externalProxy sync, inbound deletion,
the depleted-inbound sweep and the orphan prune) now goes through
database.DeleteHosts, which keeps each deleted host's inbound in
host_tombstones in the same transaction. A binding to a deleted host closes
only that inbound; ids that resolve to no host at all still fail closed
everywhere. The Postgres Host step now runs the deletion cases as well.
Host rules applied per inbound only, so every client of an inbound got the same
subscription endpoints (#6618). A client can now be bound to one or more host
rules, and its raw, JSON and Clash subscriptions render only those hosts, in
either subscription order; an unbound client is unchanged. A binding whose hosts
are deleted, disabled or excluded from the format fails closed: the client gets
no links there but stays in traffic accounting. Host edits keep row ids, so
bindings survive them; nil leaves a stored binding alone and an empty list
clears it.
AmneziaWG clients accept a randomised PersistentKeepalive range such as 15-25,
which makes keepalive timing harder to fingerprint; the panel only stored a
single number. A client's keepalive may now be a range, validated the way
AmneziaWG parses it. The downloadable .conf and vpn:// profile carry the range,
Clash/Mihomo output gets its lower bound, and plain WireGuard stays scalar-only.
The range lives in an additive wg_keep_alive_range column, so the integer
column and an older panel binary keep working after a rollback.
The per-host Mihomo X25519 switch has been stored since managed hosts landed,
but no renderer read it, while every REALITY proxy was forced to
support-x25519mlkem768: true. On some networks DPI drops the second segment of
an ML-KEM ClientHello and blackholes the server for that client. A host with the
switch on now gets support-x25519mlkem768: false and no ML-KEM hint in its vless
link; switches saved while they had no effect are cleared once, so upgrading
does not silently change existing subscriptions.
A REALITY host's fingerprint now reaches the Clash and JSON outputs, and every
host endpoint gets its own deep copy of the stream, so one host's blank SNI,
fingerprint, Host header or path no longer inherits another host's value.
Operators who front a server with an IP range (a CDN or anycast prefix) had to
list each address as its own host. A host address may now be a CIDR, and every
subscription fetch expands it into up to randomCount (1–100, default 1) unique
random host IPs from the range, IPv4 and IPv6 alike, skipping the network and
broadcast addresses. The panel's own previews, QR codes and tunnel config
exports (WireGuard, AmneziaWG, TUIC, MTProto) expand it the same way, and the
externalProxy importer writes the model's default count so the re-sync still
recognises untouched imported hosts.
Every bearer-authenticated request, including each node-sync call, loaded all
enabled api_tokens rows and compared each stored SHA-256 hash in constant time.
Tokens are stored hashed, so the database can compare hashes directly: a
timing leak there reveals only a stored hash, which cannot authenticate. The
lookup is now one indexed seek on idx_api_tokens_token, which AutoMigrate
creates from the model tag on new and existing databases; scope and expiry
are still checked afterwards.
One lost heartbeat on a lossy link flipped a node offline and sent node.down,
and the next probe sent node.up, so a flaky node flooded Telegram, email and
Discord with alert pairs.
A new nodeDownThreshold setting (default 1, today's behaviour) works like
outboundDownThreshold: node.down fires once the failed-check streak reaches it,
once per outage, and node.up only after a node.down was sent. The announcement
is persisted in nodes.down_notified, so a restart inside the threshold window
neither drops the outage's node.down nor re-announces nodes already reported
offline; nodes offline at upgrade are seeded as announced.
Subscriptions build an inbound's links from its Host rows, and those rows are
imported from streamSettings.externalProxy only when the inbound is added. An
update that moved the external proxy returned 200, but every subscription kept
handing out the old address, port and security.
An update now re-syncs only the externalProxy entries it changed onto hosts that
are still exactly as imported. Unchanged entries are set aside first, so a host
the admin edited, disabled, deleted or shared is never re-imported next to the
admin's version, and a stream without the externalProxy key leaves hosts alone.
The first user is now created when the server starts, with a random
username and password printed once to its log (docker logs, the journal),
instead of a fixed pair seeded by InitDB. CLI calls that initialize the
database are often piped away, as the Docker entrypoint's port lookup is, so
only the server's own log reliably reaches the operator.
`x-ui setting -show` keeps reporting hasDefaultCredential: true until a user
exists, so install.sh still sets its own credentials on a fresh install.
Existing databases are not changed. Verified on a built binary: fresh
setting -show, install.sh-style credential set, first start, login and
restart. The PostgreSQL lane was not run locally; the change adds no query.
* fix(node-sync): do not latch node disable when master allows (#6870)
nodeDisableIsStale trusted any node-reported enable=false whose limits matched
the master's, treating it as a genuine verdict and latching it on the master.
But matching limits no longer prove the verdict: a single stray false
(a depleted snapshot the master later re-enabled, a stale
disableInvalidClients hit, or a push that lagged a quota reset) leaves the
client stuck disabled on the node, and every master tick flips the client's
state again. This is the loop reported in #6870.
Make nodeDisableIsStale a single rule: stale iff the master's own deadline
and quota still permit the client. A genuine combined-quota or expiry
disable (masterLimitsAllowClient == false) still latches, preserving #4917.
Mirror the same rule in ClientTrafficEnableMergeExpr so the SQL UPDATE and
the Go in-memory replay cannot drift.
* fix(node-sync): keep node usage over quota latching a node disable
Dropping the matching-limits latch (#6870) let the master re-enable a
client the node had genuinely counted past its quota whenever the
master's own counters lagged, e.g. after a seeded-at-zero adoption,
reopening #4917. A node's enable=false now stays latched when the
node's own usage already spends the master's quota; otherwise the
master's limits decide, so a stray disable no longer loops.
Restores TestNodeQuotaDisable_SameExpiryStillLatches as it was on main.
---------
Co-authored-by: Alireza Ahmadi <alireza7@gmail.com>
* feat(auth): add node-admin API token scope
Keep ordinary node-sync credentials unable to self-update a remote panel while allowing explicitly elevated node administrators to inherit synchronization access and invoke updatePanel.
* style(docs): format API scope table
* fix(auth): preserve mTLS node-sync semantics
Allow only an explicit node-admin bearer to elevate a verified mTLS request. Existing admin, monitor, and node-sync bearer values continue to use the historical node-sync identity on mTLS connections.
* chore(ci): rerun flaky checks
---------
Co-authored-by: libmur-dev <333915961+libmur-dev@users.noreply.github.com>
A host's verify_peer_cert_by_name must only hold a server name an
operator typed. The column started life as a boolean, and the migration
that was meant to discard those values runs after AutoMigrate, which has
already cast the column to text: SQLite's table rebuild stores 0/1 as
"0"/"1", and Postgres' USING col::text stores "false"/"true". The
migration then sees a text column and leaves the values alone.
Since 3.10.0 the JSON subscription lifts host TLS verification fields to
the level xray reads, so that leftover "0" is now sent as the cert name to
verify and clients such as Happ refuse the server certificate.
A one-shot HostVerifyPeerCertByNameBoolFix seeder blanks exactly the four
cast values on existing databases; real names are untouched. The
Postgres variant joins the CI schema job, since that cast only happens
there.
xray-core builds a Shadowsocks-2022 inbound with users only for the AES
methods: the multi-user identity header is AES-only, so the config
builder and the multi-user server both reject chacha20. Every panel
inbound carries clients, so picking 2022-blake3-chacha20-poly1305 in the
inbound form kept the whole core from starting; its links also failed
on the client with "multi-key is not supported".
The inbound form no longer offers the method and AddInbound/UpdateInbound
reject it. Startup moves stored inbounds to 2022-blake3-aes-256-gcm,
which takes the same 32-byte keys, so every stored key stays valid.
Outbounds keep the method, since a single-key outbound to such a server
works. The share-link generator drops the single-user branch that only
this method reached.
xray-core parses the inbound-level Shadowsocks-2022 key with ParseKey and
refuses one of the wrong size while building the inbound, which keeps the
whole core from starting, not only that inbound. Only client keys were
checked, so an API caller posting a 32-byte key on aes-128 (or keeping a
16-byte key after switching to aes-256/chacha20) saved fine and took
Xray down.
AddInbound and UpdateInbound now reject such a key with a message that
names the method and the size it needs. The check uses the core's own
GetCipherMethod/ParseKey, so a raw non-base64 key the core accepts stays
valid. Startup also replaces a stored wrong-size server key: that inbound
never worked, so no client holds a working copy of it.
xray-core 26.9.9 dropped finalmask.quicParams.udpHop for the client-only
"udphop" UDP mask {mode, interval, remoteIPs, remotePorts}. The panel kept
writing the old key, so hysteria/xhttp outbounds and JSON-subscription
clients silently stopped hopping ports.
An inbound keeps quicParams.udpHop: it is panel metadata advertised as the
link's mport, and a udphop mask on a listener fails with "udphop: client
only". The conversion (maskcompat.UpgradeLegacyUDPHop, intervalRemote mode)
runs only where a client config is produced:
- UDPHopClientMaskFix seeder over hosts, sub-JSON finalmask, cached
outbound-subscription outbounds and template outbounds (never inbounds);
- GetXrayConfig heals template outbounds at build time;
- the JSON subscription upgrades each generated client stream;
- the Go and frontend link importers upgrade a legacy fm= param.
The finalmask editor gains a side prop: the client side lifts the dead key
on mount and offers a udphop mask editor (also for xhttp's HTTP/3 dial);
the inbound side keeps the UDP Hop switch, labelled as advertised.
The inbound add and update handlers bind the body into model.Inbound and
validate Protocol against a oneof list that predates MASQUE, so every
save of a MASQUE inbound from the panel or the API failed validation
even though the rest of the stack (b04039c2) handles the protocol.
Add masque to the list and regenerate the schemas and OpenAPI document
that mirror it.
xray-core v26.10.10 serves MASQUE: CONNECT-IP over HTTP/3 or HTTP/2,
always behind TLS, as an inbound and an outbound protocol riding a
dedicated "masque" transport. The panel could not create either.
Inbound: MASQUE is a multi-user protocol whose users log in with their
email and password over Basic auth. The panel keeps the client's
"password" like trojan and GenXrayInboundConfig hands it to the core as
"pass", so the full-config path, the live AddInbound path and node
pushes all emit what the core reads; one user with an empty pass makes
the core refuse the whole inbound. Live user adds build a masque.Account
from either key, client-only changes diff per user so a new client does
not drop every connected tunnel, and client creation, copy, validation
and edits key on the password. The address pool and MTU get form
fields, TLS is mandatory, and the port check follows the core's
listener choice: HTTP/2 on TCP when the ALPN offers h2, HTTP/3 on UDP
when it offers h3 or not h2. Nodes may host MASQUE from v3.9.1, the
first panel release that knows to rename the password.
MASQUE has no share-link format, so links and Clash skip it; the JSON
subscription builds the client's masque outbound with its email and
password, and the subscription allowlist now lets a subId see MASQUE
inbounds at all. The IP-limit job, client pages and traffic tracking
list the protocol.
Outbound: the form edits the server, remote DNS, and the transport's
host, path, Basic credentials, headers and WARP block (enrolled key,
endpoint public key, tunnel addresses), which xray-core refuses next to
user/pass. The outbound test probes it through the core, since its
default HTTP/3 dial is UDP.
Move the three Xray binary pins (DockerInit.sh, both release.yml
fetches) to v26.10.10, in lockstep with the xtls/xray-core module that
82c77111 already bumped to 701af60772cd.
xdns finalmask (#7090): a domain now takes a "names" list instead of a
single "name", and a resolver is an "addrs" list of udp:// or tcp://
URLs instead of {type, settings:{addr}}. The loader ignores the old
keys rather than failing, so every mask the 26.9.30 seeder wrote would
load with no domain and no resolver and the tunnel would carry nothing.
maskcompat.UpgradeLegacyXdns now lifts both the pre-26.9.30 string lists
and the 26.9.30 objects straight to names/addrs, dropping entries the
old loader refused. A new seeder (XdnsFinalmaskNamesAddrsFix) reruns it
over every stored finalmask, and the save path, GetXrayConfig, both
link importers and the mask editor's mount lift go through it. Template
outbounds now get the build-time heal too: a 26.9.30 template pasted
after the seeder passes the save check, since the core loads that shape
without error. The editor edits names and addrs as tag lists and no
longer requires record types, which the core now defaults (TXT on a
client, A/CNAME/TXT/AAAA on a server). The wire format did not change,
but clients on an older core cannot read the new config shape.
Lua scripts (#6823): dns.script, routing.script and dns servers[].id
are new. The xray page parsed the dns block with a strict schema, so
loading it dropped script and id and the next save deleted them; the
schema now keeps both and the DNS server modal carries the id through
an edit. The hot routing apply built routing in-process, and that build
now resolves the script file from the panel's working directory, so a
script beside the xray binary failed every rule change into a full
restart and broke the node bridge. RoutingService cannot change the
script anyway, so the panel no longer resolves it there.
TLS client roots (#7105): the core now verifies against its bundled
Mozilla roots instead of the OS store unless tlsSettings.useSystemCA is
set. The outbound TLS form gets a switch for it, so an outbound to a
server signed by a privately installed CA can opt back in.
A SQL dump replay only has to rebuild the tables of the database it
restores into. Run it on a single connection whose attached-database
limit is zero, so the script cannot open or create any other file.
* feat(tuic): implement native in-process Go TUIC v5 server
- Implement native TUIC v5 protocol server on pure Go using quic-go
- Bridge decrypted TCP/UDP traffic into Xray-core via loopback SOCKS5 inbound
- Support full Xray routing rules (geosite/geoip) and cascading outbounds
- Implement atomic per-client traffic accounting with TotalGB and ExpiryTime
- Add automatic legacy cleanup for older Rust tuic-server binaries, configs, and orphaned processes
- Eliminate external Rust tuic-server downloads from install/CI scripts
* fix(tuic): address traffic accounting, client reload, and socket lifecycle issues
* fix(service): update checkTuicSocksReverseConflict to use bindAddr for listenOverlaps
* fix(tuic): resolve traffic double-accounting, UDP fragmentation, and socket lifecycle issues
* feat(tuic): complete native Go integration and address audit findings
- Integrate an isolated QUIC fork pinned to a specific commit
- Preserve original QUIC dependencies for Xray, Hysteria and Gin
- Apply BBR, CUBIC and Reno to server connections and exported client profiles
- Bridge Xray BBR with correct monotonic time and congestion type conversions
- Handle congestion sender recreation after PMTU changes
- Update congestion control for new connections without restarting the listener
- Preserve existing connections and their selected congestion controller
- Apply per-inbound log levels through the shared panel logger
- Add lifecycle, authentication and TCP/UDP relay events without exposing secrets
- Rate-limit repeated authentication and relay warnings
- Support native and QUIC UDP relay modes on the same listener
- Recover UDP associations after relay worker failures
- Fix TCP relay cancellation, idle shutdown and half-close handling
- Close active sessions when client credentials are revoked or disabled
- Track traffic by immutable client statistics IDs across email and UUID changes
- Prevent ambiguous accounting and duplicate UUIDs within TUIC inbounds
- Persist pending traffic in a durable shutdown journal
- Replay journal batches transactionally without duplicate accounting
- Report server shutdown failures through the shared logger
- Preserve legacy flat and nested TUIC settings compatibility
- Normalize congestion controller values consistently across backend and frontend
- Preserve controller, UDP mode and SNI in client links and subscriptions
- Separate client profile options from server settings in the TUIC form
- Keep certificate path autofill explicit when changing client SNI
- Align UDP packet size validation with protocol limits
- Simplify and localize TUIC field hints and certificate autofill messages
- Add controller, TCP/UDP, logging and live settings update tests
- Add accounting identity, journal replay and shutdown regression tests
- Add relay recovery, session revocation and legacy frontend form tests
* fix(service): alias the TUIC duplicate-UUID subquery for PostgreSQL < 16
syncInboundClients runs a COUNT(*) FROM (subquery) for every client sync,
whatever the protocol. PostgreSQL before 16 rejects a FROM subquery with
no alias, so on the distro PostgreSQL install.sh provisions (14 on Ubuntu
22.04, 15 on Debian 12) every client add or edit failed with SQLSTATE
42601. Reproduced against postgres:15 with the new env-gated test.
* fix(database): create tuic_traffic_receipts through the model migration
AddTuicTrafficBatch issued CREATE TABLE IF NOT EXISTS at runtime, a schema
change outside db.go. The table was invisible to allModels and
migrationModels, so x-ui migrate-db dropped the receipts and a retained
journal could be counted twice after a SQLite to PostgreSQL move. It is
now a GORM model in both lists, and the insert uses OnConflict DoNothing.
* chore(tuic): skip the ICMP-dependent relay test on Windows, drop dead collectors
Go disables SIO_UDP_CONNRESET on Windows, so a dead UDP bridge never fails
a read there and TestAudit3UDPAssociationMustRecoverAfterBridgeReadFailure
was red on every Windows run. Server.CollectTotalTraffic and
Manager.CollectTraffic had no caller.
* refactor(tuic): serve TUIC on apernet/quic-go instead of a personal fork
The native server depended on github.com/poise52/quic-go, a personal fork
of apernet/quic-go patched only to pick the congestion controller before
the handshake. That put a second QUIC/TLS stack in the binary that no
upstream security fix reaches. apernet/quic-go is already in the graph
through xray-core and exposes SetCongestionControl, so BBR is now installed
on each accepted connection with Xray's own congestion.UseBBR; the
cross-module BBR adapter is gone.
apernet ships New Reno as its only built-in sender, so a cubic setting is
served as new_reno server-side (clients still get cubic in their profile).
The test inspectors now read the sender under congestionMutex, which the
post-handshake install writes under.
Linux loopback, single stream through Xray: 2428 -> 3383 Mbit/s (bbr).
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
Bump xtls/xray-core to b26a91de4f (v26.9.30) and the three binary pins
(DockerInit.sh, release.yml Linux + Windows) in lockstep. No deleted
symbols; the sing and sing-shadowsocks indirect deps drop out with the
SS2022 rewrite.
XDNS finalmask (#6718) replaced its string lists with objects: domains
are {name, types, edns0, lenLimit, labelLimit} and client resolvers
{type, settings.addr}. The loader no longer parses the old lists, so a
single stored xdns mask keeps the whole core from starting. The new leaf
package internal/util/maskcompat converts them: "name[:type]" becomes a
domain and "name[:type]+udp://addr" a domain plus a udp resolver. A bare
name maps to TXT, the type legacy clients queried by default, and each
converted domain keeps the 1232-byte EDNS0 the old code always used
(without it the server caps answers at 512). It runs from:
- the XdnsFinalmaskObjectsFix seeder, over inbound streams, hosts, the
xray template, the global sub-JSON mask and cached subscription
outbounds;
- inbound save (normalizeStreamSettings) and GetXrayConfig, for rows
that never went through the seeder;
- both link importers, since fm= from an older panel carries the lists.
The finalmask form edits the object shape (every key needs a registered
field, or the finalmask watch drops it on save) and lifts legacy masks
on open. The udp-mask golden fixture moves to the object shape, which
TestGoldenStreamFixturesBuildInXray now builds through the core. The
wire format changed as well, so pre-upgrade clients need the new core.
WireGuard outbound (#6771) dropped settings.domainStrategy and the
remoteDNS "local" mode. The endpoint lookup now follows
sockopt.domainStrategy and in-tunnel targets the outbound's
targetStrategy. The old key is silently ignored, which undid the
IPv4-first endpoint lookup the WARP outbound depends on (#5205), and
"local" now panics the core at startup because remoteDNS goes through
netip.MustParseAddr. The WireguardDomainStrategyFix seeder moves a stored
family preference to both keys (a value already set wins) and turns
"local" into targetStrategy; the outbound form lifts legacy rows the same
way and drops its select, the WARP modal writes the new placement, and
the inbound form loses a field the server never read.
ValidateOutboundConfig now refuses a non-IP remoteDNS entry, which
conf.Build() lets through, on template save and for outbound
subscriptions.
Noise finalmask items accept type "exp" (#6862), a tag expression. The
form offers it for noise items only: header-custom items go through the
core's PraseByteSlice, which refuses it.
TUN gained autoSystemDnsToGateway (Linux) and autoSystemWfpBlockLeak
(Windows). Both pass through the settings schema so a value set in JSON
survives the next form save.
MASQUE (inbound, outbound, transport) and the XDRIVE transport are new
protocols the panel does not offer yet; their new loader refusals only
cover configs the panel never generates. The FakeDNS IPv6 pool default,
the SS2022 rewrite (same gRPC account; emails are now deduped
case-insensitively, as the panel already does), the restored udphop
interval default and the rest change no panel-facing config.
Invariant: a client traffic reset zeroes every counter that enforces the
client's quota - the master's, each hosting node's, and the local MTProto
sidecar's. A node cuts a client on its own local counters, and the master
adopts that verdict when both judged the same limits (#4917).
Node counters: ResetClientTraffic tried the node once and dropped a
failure ("nothing replays a reset"); BulkResetTraffic,
ResetAllClientTraffics and ClientService.ResetAllTraffics never told the
node at all. The node kept its pre-reset usage, switched the client off
again on its next tick, and the master latched that - a client shown at
zero usage stayed disabled.
Every reset path now queues a node_pending_resets row per hosting node in
its own transaction. It is delivered right after commit (per-client
endpoint up to the push threshold, bulkResetTraffic above) and replayed by
the node sync ahead of its snapshot, and dropped only once the node
accepted it. While one is owed, the merge takes only that client's usage
from the node, not its enable or limits. Deliveries to a node are
serialized so a reset is not sent twice.
Sidecar quota: BulkResetTraffic, ClientService.ResetAllTraffics and
auto-renew zeroed the panel counters but not mtg's own quota counter, so
the sidecar kept refusing a renewed or reset MTProto client. They now
reset it too, scoped to the affected clients.
Panels up to v2.x stored a client's tgId as a string, "" when unset. The
startup migration heals copies already in the database, but an exported
inbound imported into a current panel goes straight to AddInbound, whose
typed client parse failed with "cannot unmarshal string into Go struct
field .0.tgId of type int64", so every such import was refused.
AddInbound now runs the legacy normalizer the clients-table seeder already
used (moved from database to model so both share it) over the incoming
settings before parsing them. String numbers become integers and empty ones
are dropped, and the settings are stored in that shape. The same applies to
/inbounds/add callers still sending the old types.
The seeder change is a pure move; the PostgreSQL lane was not run (no
Docker on this host) and is left to CI.
Closes#6663
InitDB assigned the new pool over the old one without closing it. The
panel's own restore flows call CloseDB first, but any other re-init
leaked the replaced pool and its handle on the database file. On Windows
that handle blocks deleting the file, which is why the four GetApiToken
CLI tests failed their t.TempDir cleanup there: dbtest.InitDB opened the
store, then GetApiToken's own InitDB replaced it. InitDB now closes the
previous pool itself; sql.DB.Close is idempotent, so the restore flows
behave as before.
* feat(inbound): excludeFromSub hides links without disabling
Add a per-inbound flag that omits subscription output while keeping the
inbound enabled for Xray, auth, and traffic accounting. Fixes#6435.
* fix(inbound): excludeFromSub review follow-ups
gofumpt model.go, sync docs OpenAPI, keep excludeFromSub master-authored
on node mirror, and exercise the legacy add-column migration path in tests.
* fix(sub): keep excluded inbounds' clients in the usage header
The excludeFromSub filter sat in getInboundsBySubId's SQL, so an excluded
inbound's clients never reached seenEmails in the raw, Clash or JSON
renderer. A client that lives only on a hidden inbound (one client per
inbound sharing a subId) dropped out of the Subscription-Userinfo usage,
quota and expiry and out of the info-node state, while the inbound kept
serving it and counting its traffic.
The query returns every enabled inbound again; each renderer skips an
excluded inbound's links but still counts its clients, the same rule the
Clash renderer already applies to external links it cannot express.
---------
Co-authored-by: mrchatam <mrchatam@users.noreply.github.com>
Co-authored-by: MHSanaei <ho3ein.sanaei@gmail.com>
Most tests opened a throwaway panel DB with database.InitDB, which runs the
full AutoMigrate + seed on an empty file every time: ~230ms, and ~850ms under
-race because GORM's reflection-heavy migration is what the detector slows
most. internal/web/service does this in ~550 of its 830 tests, so the CI race
job spent ~10 of its ~14.6 minutes re-migrating empty databases.
internal/database/dbtest.InitDB migrates once per test process, then hands
each test its own copy of that file (~130ms under -race) and registers the
CloseDB cleanup. The copy then goes through InitDB like a panel restart, so
every test still starts from the state a fresh install has. Tests that reopen
an existing file, migrate a hand-built legacy DB or target Postgres keep
calling database.InitDB.
Locally under -race: internal/web/service 626s (last CI run) -> 114s,
internal/sub 246s -> 35s.
* feat(clients): add calendar weekly renewal and schedule previews
Expose fixed-day, calendar-weekly, calendar-monthly, and disabled renewal
through one shared selector in individual and bulk client forms. Store the
weekly weekday separately (Monday 1 through Sunday 7) and use panel-local
calendar dates rather than a fixed 168-hour duration. Resolve skipped or
repeated midnights to the first valid instant of the selected date, and skip
an entirely nonexistent calendar date rather than changing the weekday.
Reuse the existing renewal writer and share its boundary alignment and
per-period catch-up calculation with an authenticated, read-only preview.
Keep monthly precedence for legacy records, fixed-day interval semantics,
maximum renewal allowances, first-use durations, and operator-disabled
settings unchanged. Selecting a mode does not rewrite an existing cutoff;
an unset calendar cutoff requires an explicit action to choose the first.
The last-valid-second preview uses the stored exclusive expiry, even when
the billing calculation aligns a legacy last-second cutoff up to midnight.
Carry weekly schedules through client persistence, paging, enable toggles,
inbound settings, and node traffic reconciliation. Migrate missing or nullable
weekday columns to disabled by default without altering existing limits, and
include the new isolated-schema PostgreSQL regression in the live CI gate.
Regenerate API contracts and reference documentation, add lifecycle and form
regressions, and document timezone, quota-reset, and upgrade considerations.
All participating nodes must be upgraded before weekly mode is enabled;
older binaries ignore the new field. Independent periodic traffic resets and
the optional month-end subscription-header display are not changed.
* fix(clients): validate renewal schedules across inbound write paths
Reject conflicting weekly/interval/monthly schedules and out-of-range
weekdays on inbound creation and edits, legacy one-client apply paths,
record/link synchronization, and traffic metadata writes. Validate imported
traffic snapshots as well, before any inbound or client is persisted, so
an inbound API cannot create a client that the clients page cannot toggle.
Merge a weekly-related schedule as one timestamp-selected tuple rather
than filling its zero fields from another renewal mode. Preserve empty
migration snapshots and the existing non-weekly monthly/interval merge
semantics. Renewal caps, counters, credentials, and deadlines are unchanged.
Add regressions for nine write paths, unchanged records and runtime calls
after rejection, valid inbound clients remaining editable, and duplicate
record merges between individually valid renewal modes.
* docs(clients): clarify depleted-client deletion risks on downgrade
Explain in English and Chinese that older versions not only stop weekly
renewal: their depleted-client cleanup can delete a weekly-only client once
its expiry or quota is exhausted. This is conditional on cleanup, not an
automatic deletion caused by downgrade itself.
Recommend backing up and converting weekly schedules to a mode supported
by every participating version before rollback, and avoiding cleanup while
mixed versions or unconverted clients remain. Merely disabling weekly
renewal does not restore the old binary's missing purge protection.
* fix(clients): bound weekly renewal date searches
Limit the search for a valid weekly calendar date to eight candidates so
an unusual timezone cannot monopolize the single traffic writer. Exhaustion
returns the original instant, allowing the existing catch-up forward-progress
guard to stop without advancing expiry, consuming an allowance, resetting
traffic, or falling back to a fixed-duration schedule that can drift.
Reject a non-future calendar suggestion in the read-only preview instead of
offering an immediately expired initial cutoff. Also report failed weekly
catch-up as a search error when allowances remain, not as cap exhaustion.
Existing preview errors use the form's current warning; no API schema or
locale changes are needed.
Exercise exhaustion with a synthetic valid TZif containing twelve skipped
Sundays. This fault-injection case was red without the bound; it is not a
claim that a production IANA timezone was observed hanging. Keep the Havana
and Apia regressions for real skipped/repeated midnights and absent dates.
* fix(tests): isolate weekly renewal preview timezone
Stop the weekly search regression from replacing process-global time.Local.
CI caught that assignment and its cleanup racing with background timer reads
through time.Now, even though the top-level tests do not use t.Parallel.
Pass the timezone and current instant into the unchanged preview calculation.
The public service still validates the request and resolves the panel timezone;
API responses, renewal accounting, and persisted client data are unchanged.
Use fixed dates for both suggestion and catch-up exhaustion, removing the
test's dependency on today's date and its unnecessary database setup. Keep a
bounded-lifetime background clock reader to expose future global-timezone
mutations under the existing race gate rather than disabling that check.
* ci: retrigger PR checks
Create an empty commit to request a fresh pull-request CI run after release dependency downloads failed with network errors.
No source, dependency, or workflow changes are included. Retry the existing checks without bypassing them.
* ci: retry PR checks and record deferred download hardening
Request another CI run after the amd64 release job compiled successfully but failed during dependency fetching with exit code 4 (network failure).
Record possible follow-up improvements for the Linux release fetch helper:
- Print each download URL and destination, and preserve error details.
- Reuse the existing curl configuration with up to five retries; add connection and per-attempt timeouts and a bounded retry window.
- Download to a temporary file and promote it to the final filename only after a successful, non-empty transfer. Keep the job failing if downloads ultimately fail.
- Validate successful downloads, recovery after a temporary failure, and correct failure after persistent errors before shipping such a change.
These improvements are intentionally deferred, not implemented or tested by this commit. This commit is empty: renewal logic, dependencies, workflow configuration, check requirements, and TLS verification remain unchanged.
---------
Co-authored-by: JacktheRanger <219502738+JacktheRanger@users.noreply.github.com>
The inbound TLS form offered cipherSuites as a closed single-choice list,
but xray reads the value as a colon-separated list and accepts any name Go
knows, so several suites or one missing from the list could not be set.
Both the inbound and the new host field now use a tag picker that keeps
the stored value as the colon-joined string xray expects; old single
values open unchanged.
A host's cipher suites replace the inbound's in the JSON subscription
stream, and a blank field inherits them. Share links and Clash carry no
cipher suite parameter, so their output is unchanged.
The core reads a dns rule's qType as a PortList, which drops a bare numeric
0 (infra/conf/common.go: `if number != 0`), and a rule with no qTypes
matches every query. A stored `"qType": 0` therefore does not target query
type 0: it drops, refuses or hijacks all DNS through that outbound.
A qType the panel writes has to be read by the core as exactly the query
types it names. Four writers broke that:
- DNSOutboundLegacyKeysFix rewrote a lone blockTypes [0] into "qType": 0,
so "block type 0" became "block everything" on upgrade.
- That seeder shipped in v3.8.0 and is recorded as done, so fixing it does
not reach installs that already ran it. DNSOutboundQTypeZeroFix spells
any stored numeric qType 0 as "0" once, protocol id matched like the core.
- The outbound form adapter turned a typed "0" into the number 0.
- The Xray template editor saves raw JSON past that adapter; the save now
applies the same rewrite.
Each writer is pinned by a test that fails without its part. The rewrite
and the repair compare policies as the pinned core builds them, and the
repair runs through runSeeders over a database whose legacy-keys seeder
already ran, on SQLite and PostgreSQL 16.
* fix(xray): read an outbound protocol id the way the core does
xray-core lowercases a protocol id before it looks up the handler
(infra/conf/loader.go: `id = strings.ToLower(id)`), so a template that
spells the direct outbound "Freedom" runs as freedom. The three config
rewriters compared the id case-sensitively, so such an outbound was
skipped while the seed was recorded as applied: the refused
sockopt.addressPortStrategy stayed and xray-core refused to start.
* fix(xray): match an outbound protocol id case-insensitively
xray-core lowercases a protocol id before looking up its handler, so a
template that spells the direct outbound "Freedom" runs as freedom while
this rewriter skipped it and left the deprecated placement in place.
* fix(xray): re-run the freedom finalRules rewrite where its seeder was gated
Both finalRules seeders recorded their rows before the predicate could see
an outbound spelled "Freedom", and a recorded row is never re-run, so the
corrected predicates alone left the #6037 private-egress hardening
unapplied on every panel that had already run them. The new one-shot
seeder replays both rewrites, and only when the config actually carries a
differently spelled freedom outbound, so stock lowercase configs stay
byte-identical.
* fix(xray): migrate the dns outbound off its legacy nonIPQuery and blockTypes
xray-core logs both keys as deprecated on every config load, and refuses them
outright next to rules. The panel's own dns outbound card wrote them with
defaults until it switched that card to rules, so a panel that ever had one
keeps warning at every start, and the card no longer reads them back — saving
that outbound from the current UI silently dropped the policy.
The seeder converts them into the three rules the core's legacy builder
produced, in its order, then drops the keys.
* fix(xray): read a dns outbound's null keys and protocol id like the core
Two details the seeder got wrong, both found reviewing the diff against the
pinned loader. A JSON null is a present key with a nil value here but a nil
pointer there, so `nonIPQuery: null` was rewritten into a reject policy the
core never built, and `rules: null` hid the legacy pair that the core does
still read — dropping the operator's policy on upgrade. And the core
lowercases the protocol id before dispatching, so `"protocol": "DNS"` was
never migrated and kept warning.
* fix(xray): place the freedom domain strategy where the core reads it
freedom resolves through the socket layer, so xray-core reads
sockopt.domainStrategy and treats both other placements as legacy: it warns on
every config load for the outbound-root targetStrategy it migrates itself, and
again for the settings-level domainStrategy it deprecates. The panel wrote
exactly those two keys from its Freedom Protocol Strategy select, the outbound
form card, and the IPv4 routing helper, so any install that had configured a
strategy logged a deprecation warning on every start.
The strategy now travels in streamSettings.sockopt everywhere the panel emits
it: the Basics select, the outbound form (including the JSON tab, which shares
the same adapter), the shipped default template, and the IPv4 outbound the
routing helper injects. Reading mirrors the loader's own order — root
targetStrategy, then the settings keys, then sockopt — so the card keeps showing
the value the core would actually run with, and saving drops the legacy keys
instead of leaving them behind.
A seeder moves the keys for configs already stored in the database, following
OutboundRemovedKeysFix. The shared outbound-root Target Strategy field is hidden
for freedom, since the core migrates that key into the very sockopt value the
card writes and two knobs for one value would race.
Tests: placement round-trips and the migration table run through the real
vendored core (a captured log handler proves the warning is gone after the
rewrite and present before it), and the modal asserts freedom offers a single
strategy field.
* test(database): seed the template row the seeder test needs
A fresh InitDB creates no xrayTemplateConfig row — the panel's setting defaults
live in the service layer — so the test has to insert the legacy template itself
and then assert the seeder's history gate stops a second pass from rewriting it.
* fix(xray): keep one strategy control per outbound, seed the row in tests
Review findings: the Transport tab's Sockopts block renders for freedom too, so
its Domain Strategy select and the freedom card wrote one sockopt value between
them and the card won on save — the field is hidden for freedom now, leaving the
card as the single control. The seeder is also pre-marked on a fresh install so
it does not run on the second start, and the seeder test seeds the template row
itself (a fresh InitDB has none) and asserts the rewrite structurally instead of
grepping for a key name that sockopt also uses.
Saving the node form writes the grown selection and marks the node dirty
in one transaction. On the next tick ReconcileNode runs before the
snapshot merge, and its delete sweep treats a selected tag with no
central row as "deleted on the master" — so an inbound the operator just
ticked in the picker (or every unselected one, when switching the node
to "all") is deleted from the node before the import that would have
created its row ever runs.
Nothing on disk separates "pending import" from "deleted while the node
was unreachable", but the pre-adoption guard already expresses the
former: while inbounds_adopted_at is zero the sweep waits for a clean
sync to adopt. A save that grows the managed set now zeroes it again,
and the same clean sync re-stamps it, so the offline-delete sweep is
only deferred by one successful sync, not disabled.
The trade: an inbound deleted on the master while the node was
unreachable is re-imported instead of swept if the operator grows the
node's selection during that same outage. That is visible and
recoverable, where the previous behaviour destroyed a live inbound.
Closes#6329
* fix(inbounds): allow negative subSortIndex for subscription order
Preserve explicitly set negative indices so primary inbounds can sort
ahead of the default without renumbering peers; keep 0/omitted → 1.
* fix(inbounds): gofumpt model.go and trim subSortIndex comments
---------
Co-authored-by: mrchatam <287639636+mrchatam@users.noreply.github.com>
* Feat(tuic): Implement native TUIC v5 protocol support via Rust sidecar daemon
- Add internal/tuic package for official tuic-server sidecar lifecycle management, configuration generation, and graceful process control
- Bridge decrypted TUIC QUIC traffic into loopback Xray SOCKS5 inbounds (63200+id) for traffic accounting, statistics, and routing rules
- Implement periodic reconciliation job (cadence @every 10s) and immediate runtime synchronization on inbound/client mutations
- Add TUIC inbound & multi-user client settings (UUID + Password authentication) in Web UI with SNI auto-fill and panel certificate loader
- Integrate tuic:// subscription links and Clash.Meta (Mihomo) proxy generation for TUIC
- Update install.sh to automatically download and install official tuic-server release for x86_64, aarch64, and armv7
- Add full localization for TUIC protocol across all 13 supported languages
* Feat(install): Support custom repository and branch in install and update scripts
* Ci(release): Enable publish-dev for feature branch and workflow dispatch
* Feat(sub): Add TUIC to subscription resolution and client QR config generator
- Add 'tuic' to getInboundsBySubId SQL allowlist to resolve TUIC inbounds in subscriptions and sub links
- Enhance buildTuicProxy in Clash subscription generator with robust host and credentials resolution
- Add tuicConfig.ts to generate standalone Clash/Mihomo YAML configuration
- Add dedicated TUIC Config tab in ClientQrModal with QR code and .yaml download button
- Add localization keys for TUIC config across all 13 supported languages
* Fix(tuic): Exclude TUIC from native Xray inbounds and strip udp_relay_mode from server config
- Exclude model.TUIC from native Xray inbounds in GetXrayConfig to prevent Xray startup failure
- Remove udp_relay_mode from tuic-server JSON configuration builder
- Update install.sh to install tuic-server binary to both xui_folder/bin and /usr/local/bin
* Fix(install): Fallback to dev-latest when releases/latest is not present on fork
* Feat(tuic): Add real-time online status and LastOnline tracking for TUIC clients
- Track client activity by mapping client UUID in tuic-server logs to email
- Integrate TUIC active clients into XrayTrafficJob to refresh local online clients
- Bump LastOnline timestamp in database and broadcast live online status over WebSocket
* Feat(tuic): Implement real-time traffic statistics and live speed reporting for TUIC
- Collect precise I/O traffic deltas for tuic-server child processes via /proc/<pid>/io
- Aggregate and attribute TUIC traffic deltas per client in tuic Manager
- Integrate TUIC traffic deltas into XrayTrafficJob to update database and broadcast live speed
* Feat(tuic): Finalize TUIC v5 integration with 1:1 traffic counting and orphan process cleanup
- Use exact 1:1 byte delta accounting from /proc/<pid>/io
- Add killStrayTuicProcesses to terminate orphan sidecars on panel startup
- Fully integrate TUIC with subscriptions, live speed meter, and all 13 locales
* Feat(frontend): Polish TUIC UI, support bulk operations, and update translations
- Align TUIC inbound certificate form with standard 3X-UI layout (Set Default Cert, Clear)
- Remove extra subtitle hint text from TUIC inbound form fields
- Support TUIC in client bulk attach/detach and bulk add modals
- Add TUIC badge color to client info modal, clients table, and host list
- Update password tooltip across all 13 locales to include TUIC
- Remove obsolete dead translation keys across all 13 locales
* Chore(ci): Finalize TUIC v5 bundling across release workflow, Docker, and scripts
* Feat(openapi): Update OpenAPI generator and schemas for TUIC types
* Fix(backend): Address core review findings for TUIC types, port checks, and xray bridge
* Refactor(traffic): Isolate proc reading with build tags and decouple TUIC metering into TuicJob
* Feat(client): Add TuicServer to InboundOption, fix config export and clean share links
* Fix(frontend): Register TUIC in multi-user helpers, tracked protocols, and tag derivation
* Chore(openapi): Re-generate OpenAPI specification and sync Zod schemas
* Chore(scripts): Add Alpine musl binaries, 386 and Windows packaging, and anchor pkill
* Fix(review): Remove stale import, correct binary names, switch to musl, and drop unreachable relay gate
* Feat(frontend): Show share link in Inbound Info and display UDP tag for TUIC
* Docs: Add TUIC v5 configuration guide and link specifications
* Docs(tuic): Correct Clash Meta configuration parameter to reduce-rtt
* Fix(tuic): Generate client credentials on copy, enforce ID/password validation, and add i386 to DockerInit
* Fix(tuic): drop unused relay, fix traffic accounting, and honor host endpoints
- Drop unused loopback SOCKS relay and eliminate port collision with AmneziaWG
- Correct inbound traffic calculation without double-counting
- Drop heuristic client traffic division while retaining online tracking
- Support externalProxy host fan-out and conditional parameters in share links
- Scope orphan process termination to managed config directory
* Fix(tuic): enforce client quotas, decouple Xray restart, and sync openapi schemas
- Regenerate OpenAPI, Zod schemas, and TypeScript types without route_through_xray
- Populate clientTraffics in TuicJob to enforce client quotas and first-use expiry
- Split process I/O delta into up and down in Process.CollectTraffic
- Remove SetNeedRestart from updateTuicInbound to prevent Xray session drops
- Use InstanceFromInbound for default ALPN and UDP relay mode in tuic:// share links
- Support allow_insecure on externalProxy host endpoints without parameter collision
* Fix(tuic): attribute client traffic only on single-user inbounds and sync link defaults
- Attribute I/O deltas to the client only when the inbound has exactly one configured client, avoiding false billing and disablings on multi-user inbounds
- Aggregate client traffic by email in TuicJob so clients on multiple inbounds don't lose deltas
- Match frontend genTuicLink defaults for alpn and udp_relay_mode with backend subscription links
* Fix(tuic): gate client traffic by total sidecar clients and require client email
* Fix(tuic): enforce inbound-only traffic limits and disable client totalGB
* fix(tuic): restore delayed start, remove client totalGB rejection, and document linux-only limits
* fix(tuic): anchor pkill, fix io baseline/split, escape yaml, and deduplicate start errors
* fix(tuic): prevent traffic double-counting, ensure info log level for delayed start, and broaden pkill matching
* fix(tuic): address review round 11 findings
- internal/sub/json_service: skip tuic protocol in json subscription to prevent direct routing leak
- internal/sub/clash_service: honor externalProxy/host row allowInsecure, sni, and alpn in buildTuicProxy
- internal/web/runtime: decouple tuic inbound add/delete from xray restart
- internal/tuic/config: restore user log-level options (warn, error) without forced info clamp
- frontend/src/lib/xray/inbound-link: fix duplicate remark suffix and apply externalProxy TLS overrides
- frontend/src/schemas/protocols/stream/external-proxy: propagate allowInsecure through host mapping
- tests: add coverage for json sub skip, clash proxy overrides, and link generation
* fix(tuic): meter inbound traffic through a UDP relay and bracket IPv6 binds
Review repairs on the TUIC v5 sidecar integration:
- Inbound traffic was read from the sidecar's /proc/<pid>/io rchar, but
the kernel only counts read()/write() there and tuic-server moves its
sockets with recvfrom/recvmmsg/sendmmsg/sendto, so an inbound's up/down
stayed at 0 forever and inbound total limits never tripped (measured:
12 MiB relayed, rchar delta 0). The panel now owns the inbound's public
UDP port with a small relay and runs tuic-server behind it on a loopback
port, counting up/down exactly on every OS. tuic-server therefore logs
127.0.0.1 as every client's address; per-client attribution stays
unsupported since QUIC is opaque.
- Instance.BindTo formatted an IPv6 listen address as ":::8443", which
tuic-server rejects with "invalid socket address syntax", so an inbound
listening on "::" or any IPv6 literal never started. It now uses
net.JoinHostPort; IPv4 output is unchanged.
- The log level is passed to the sidecar as chosen. Online status,
last-online and delayed start are read from its Info lines, so the Log
Level field now says that Warn and Error switch them off for the
inbound, and the docs say the same.
- Drop two frontend tests that only exercised a getter and a set lookup,
and strip the trailing blank line that made gofumpt fail on two of the
new Go test files.
* fix(tuic): harden tag updates, runtime routing, and relay stability
---------
Co-authored-by: poise52 <equipoise52@gmail.com>
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
Some subscription providers require a client-specific User-Agent before returning outbound links. Persist an optional value per subscription and use it for refreshes and previews while preserving the existing default for blank values.
* feat(clients): let admins set PersistentKeepalive on tunnel clients
model.Client already carries KeepAlive, and every AmneziaWG/WireGuard client
config emitter already writes PersistentKeepalive when it is above zero -- but
nothing in the UI could set it, so it stayed 0 and the line was never emitted.
Without it a peer that goes quiet has nothing to trigger a handshake: WireGuard
only initiates when it has data to send. An idle client stays disconnected
after any interruption -- a NAT mapping timing out, a device sleeping, the
panel restarting -- until the user generates traffic themselves.
New clients default to 25, the conventional value, which also keeps the NAT
mapping open. Existing clients keep whatever they have, and 0 remains valid and
means "do not send keepalives".
* fix(clients): let an explicit 0 actually disable PersistentKeepalive
Addresses review feedback on the previous commit.
UpdateInboundClient carries a stored keepalive forward whenever the incoming
one is zero, so the settings JSON and the running peer survive a metadata-only
edit that omits the field. That was a 0 -> 0 no-op while no UI could set a
nonzero value. Now that the client form can, the carry-forward became reachable
in the other direction: a client created at the form's default of 25 could
never be returned to 0, and the hint text shipped to all 13 locales -- "0
disables it" -- described something the backend silently refused. The save even
reported success, because a settings blob that came back byte-identical skips
the transaction entirely.
The zero value cannot carry that distinction, so model.Client.KeepAlive becomes
*int: nil means the field was never sent, &0 means "send no keepalives". The
pointer survives the internal marshal in ClientService.Update, which is where an
explicit 0 was being erased by omitempty before UpdateInboundClient ever saw it.
ClientRecord.KeepAlive stays a plain int -- it is the stored column, where
"unset" has no meaning -- and the conversions bridge the two.
Two tests, both red before this change in the direction they cover: an explicit
0 must reach wg_keep_alive, and an update that omits the field must still leave
a stored 25 alone.
Also adds the output transform every other numeric field in the client form
already has, so a cleared box sends 0 rather than null.
* fix(clients): repair the keepalive pointer conversion after the main merge
Merging main brought buildAmneziaWGProxy (#6326) in beside the
Client.KeepAlive int -> *int change without reconciling the new call site,
so internal/sub stopped compiling and took every package importing it with
it. The two sides touched different lines, so git merged them without a
conflict -- the green `make verify` on 112b19a8 predates the break.
ToClient also wrapped a stored 0 in a pointer, so omitempty stopped
omitting: a VLESS client's settings JSON gained "keepAlive": 0 on the
attach and bulk-attach paths, and that JSON reaches xray-core verbatim
through GenXrayInboundConfig. wg_keep_alive cannot tell "off" from "never
set", so a stored 0 now stays nil.
Also copies the regenerated openapi.json over the docs mirror, which
nothing in CI checks, and trims two comment blocks to the two-line cap.
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
* fix(mtproto): use hosts for public share links
Generate MTProto subscription, client, copy, QR, and export links from managed Hosts so reverse-proxied public ports are advertised correctly. Migrate the redundant legacy custom share address into a Host and keep old imports compatible.
Closes#5126.
* fix(mtproto): keep host share links lossless and consistent
Address review on the MTProto hosts share-link change.
The migration no longer drops a legacy custom share address: an unrelated
(or disabled) Host stopped suppressing it, so only a Host already advertising
the same address does. An imported address now clears the same validation the
strict normalizer applies to every other protocol before it becomes a Host.
Panel and subscription agree on the endpoint a Host advertises: a portless host
string inherits the inbound port rather than the group's, and a port-only host
inherits the inbound address instead of emitting server=%3A8443.
LinksForClient prefers host endpoints for every protocol, the way getSubs and
inboundLinks already do, so the client-links API no longer ignores managed
hosts.
* fix(mtproto): migrate legacy share address past unusable hosts
The seeder skipped the conversion whenever any Host already carried the
address, including one that is disabled or excludes the raw sub type.
hostEndpoints drops those, so nothing advertised the address afterwards and
the marker committed with no way back. The duplicate check now mirrors that
same predicate.
UpdateInbound cleared a legacy MTProto shareAddr without the Host conversion
AddInbound runs, so re-applying an inbound definition through the API dropped
the public address silently. Both paths share one capture helper now.
Refresh the generated clients API reference for the summary reworded in the
previous commit.
* fix(inbounds): wait for the hosts list before building mtproto links
The page destructured only `hosts` from useHostsQuery, and that list reads
empty both while /panel/api/hosts/list is in flight and after it fails.
withMtprotoHostEndpoints then returns the inbound untouched, so Copy, QR and
Export advertise the internal listen port — the endpoint this branch exists to
replace. It is worse than not fixing it: the seeder has already moved a legacy
custom share address into a Host, so the fallback is the panel's own hostname
instead of the operator's address, and the Go generators reading the same rows
from the DB stay correct, so the two disagree for one inbound.
Fold the query into the page's existing readiness gate, the same way
useInbounds and HostsPage already consume that hook, so an empty list means
"no hosts" rather than "not loaded yet". The error branch fires only when
nothing is cached, so a refetch failing on window focus does not blank a page
whose host rows are still perfectly usable.
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
Bump xtls/xray-core to 37ceb8b4b6 (v26.9.8) and the three binary pins
(DockerInit.sh, release.yml Linux + Windows) in lockstep. No deleted
symbols; the impact is entirely on the JSON config surface.
Outbound "proxySettings" is now refused by the config loader (moved to
streamSettings.sockopt.dialerProxy) and a freedom outbound rejects
sockopt.addressPortStrategy. Either key in a stored template would keep
the core from starting after the upgrade, so a new OutboundRemovedKeysFix
seeder rewrites xrayTemplateConfig once: proxySettings.tag becomes
sockopt.dialerProxy (an existing dialerProxy wins) and addressPortStrategy
is dropped from freedom outbounds. Template saves and outbound
subscriptions already run through the vendored loader, so the new
refusals surface there with the core's own message.
REALITY no longer applies a built-in minClientVer (26.3.27) when the
field is empty. The form placeholder and the min/max hints in all 13
locales now say that empty means no minimum.
New upstream keys the Zod schemas would otherwise strip, with form
support where a sibling field already had it:
- blackhole response type "custom" with base64 customResponseData
- realm finalmask ipMode (dual/v4/v6) and portMapping (UPnP / NAT-PMP)
- quicParams brutalDisableLossCompensation, disableChromeParrot,
disableGSO, disableStatelessReset
- hysteria masquerade proxy xForwarded
- wireguard outbound remoteDNS
- routing rule localOS
freedom.domainStrategy is only deprecated upstream (auto-migrated to
sockopt.domainStrategy with a warning) and is left untouched.
* fix(database): keep the SQLite store owner-only
InitDB created the data directory 0755 and let SQLite create x-ui.db
and its -wal/-shm side files under the default umask, so on a stock
install they are world-readable. The store holds client UUIDs, Reality
private keys and the admin password hash, so any local account could
read them.
Create the directory 0700 and chmod the database files to 0600 right
after opening. SQLite gives -wal/-shm the mode of the main file, so
files created later inherit it; existing installs are tightened on the
next start. PostgreSQL deployments are untouched.
Assisted-by: Claude Code:claude-fable-5-1
* fix(database): tolerate chmod failures, keep the dump and install dir owner-only
Review follow-ups. A store the panel cannot chmod (root_squash NFS, a
foreign uid in a container) refused to start, which is worse than the
0644 it had before; log and continue instead, as the backup-directory
cleanup above already does. install.sh reset /etc/x-ui to 0755 right
after the binary created it 0700, so the directory hunk was inert on
real installs; create it 0700 there too. The migrate-db dump in the same
directory is a plaintext copy of the same secrets and was written 0644.
Assisted-by: Claude Code:claude-fable-5-1
* fix(sub): randomize fresh panel subscription paths
Seed distinct cryptographically random paths for base64, JSON, and Clash subscriptions when a panel database is first created. Persist them so restarts keep published URLs stable while upgrades preserve existing settings.
Generated-by: OpenCode:gpt-5.6-sol
* fix(sub): regenerate paths on settings reset
Keep subscription paths unpredictable after a factory reset, close the test database on failure, and update the builder, OpenAPI, and localized docs to describe panel-specific paths instead of obsolete fixed defaults.
Generated-by: OpenCode:gpt-5.6-sol
* feat(model): add MemberWeights to SubBalancer
Per-inbound leastLoad weights, stored with the same gorm json serializer
as InboundIds so AutoMigrate adds the text column on every dialect
(postgresModelSettled sees the missing column and re-runs). Absent
entries mean weight 1.0; only meaningful for strategy leastLoad.
* feat(sub): accept memberWeights on the sub-balancer API
Parsed as one JSON form field (gin cannot bind bracket-keyed maps from
urlencoded bodies). validate() rejects weights under any strategy but
leastLoad — xray would silently ignore costs there, so storing them
would pretend a knob exists. Non-positive weights error instead of
defaulting: a zero usually means a typo'd "never pick this node".
Entries for inbounds no longer selected are dropped on save.
* feat(sub): emit leastLoad strategy costs from member weights
costs[] is built after the tagging loop reuses the exact retagged tags
(bal-N-protocol[-k]) and each member's owning inbound id. Members
without a configured weight default to 1.0, but costs are omitted
entirely unless at least one explicit weight survives — an all-1.0
array would bloat every subscription response for no effect.
* feat(sub-balancers): leastLoad member weight inputs
Weight fields render only under leastLoad and hide on strategy change
without dropping their values, so an accidental toggle away and back
loses nothing until save; non-leastLoad submits strip them entirely
because xray would ignore costs. Weights travel as one JSON form field
(gin cannot bind bracket-keyed maps) and every locale gets the three
new keys in the same commit per the dead-keys rule.
* docs(api): document memberWeights on sub-balancers
leastLoad-only JSON form field; update notes that omitting it clears
stored weights. Regenerated openapi artifacts via make gen + the docs
copy/gen:api step nothing checks automatically.
* fix(api-docs): use the allowed object ParamType for memberWeights
* fix(sub-balancers): cap the member-weight list height
Many selected inbounds pushed the modal body past the viewport. The
weight rows now scroll inside a 220px viewport, mirroring the inbound
picker's listHeight so both lists read the same.
* fix(sub): anchor leastLoad cost matches to exact member tags
Verified against xray-core: without regexp, WeightManager matches costs
by substring (strings.Index), so the bare tag "bal-1-vless" also hits
the deduplicated "bal-1-vless-2" and both members get the first
entry's weight. Anchored ^tag$ regexps make every cost entry match only
its own member. Also confirmed value<=0 makes xray derive a weight from
the first digit of the matched tag — validating weights > 0 server-side
was the right call.
* fix(sub-balancers): keep member weights across the enabled toggle
The table's toggleEnabled re-posted a full-row payload without
memberWeights, and the update path treats an absent key as "erase" —
flipping the switch silently dropped every configured weight. Round-trip
the stored weights through the toggle payload, and prove persistence
with a re-Get in the weight-validation test (the returned struct alone
would stay green even if Save skipped the column).
* fix(sub-balancers): address review on member weights
- omitempty on MemberWeights: the panel sends null for every pre-existing
and non-leastLoad balancer, which failed the hand-written zod response
schema on every fetch (zod .optional() accepts undefined only; switched
to .nullish() per repo convention) and drifted the generated contract.
Regenerated openapi artifacts + docs copy + MDX.
- Bound weights to the positive float32 range: xray decodes costs as
float32, so an over-range value makes clients reject the whole
subscription document and an underflow decays to the tag-digit
fallback weight. Tests for both directions.
- Trim six comment blocks to the 2-line cap from CLAUDE.md.
---------
Co-authored-by: DIMFLIX <dimflix@users.noreply.github.com>
* feat(amneziawg): add native AmneziaWG protocol backend
AmneziaWG (WireGuard plus DPI-resistant obfuscation) needs no Docker
here — it runs as a genuine kernel interface via awg-quick/awg, managed
the same way internal/mtproto manages mtg: one Inbound row is one
desired Instance, and a Manager reconciles running interfaces toward
the database every 10s (internal/web/job/amneziawg_job.go) plus
immediately after a client edit (applyLocalAmneziaWG).
Clients reuse model.Client verbatim (the same PrivateKey/PublicKey/
PreSharedKey/AllowedIPs fields WireGuard already uses), so bulk
operations, the QR/share-link modal and subscriptions come from the
shared inbound infrastructure instead of a parallel implementation.
internal/amneziawg owns the obfuscation param generator/validator
(ported from coinman-dev/3ax-ui, upgraded to AmneziaWG 2.0's S3/S4
padding and I1 signature packet) and the exec wrapper around
awg-quick/awg, with fingerprint-based reconcile (noop / reload-via-
syncconf / full restart) mirroring mtproto.Manager so a same-protocol
edit doesn't force an unnecessary interface bounce that would drop
every peer's connection.
Frontend and install.sh's DKMS/awg-tools setup are tracked separately;
this is backend-only.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): add frontend support and fix a Go->Zod generator gap
Wires the amneziawg protocol through the panel UI the same way every
other protocol is registered: a Zod settings schema (nested
{server, clients}, matching the Go JSON exactly), the protocol enum,
the inbound-form's per-protocol fields component and its
tab-visibility allowlist, the default-settings factory, the client
schema dispatcher, and the sniffing-capability exclusion (no Xray
inbound exists for amneziawg, same as mtproto).
Client key/allowedIPs fields are reused rather than duplicated: since
AmneziaWG clients are wire-identical to WireGuard clients (same
model.Client fields), ClientFormModal renders one shared field block
for both, switching only the visible label by which protocol is
active. The private-key input also gets a live public-key sync via a
new useEffect, because unlike WireGuard's Xray-native inbound (which
re-derives its public key at runtime and never stores one),
AmneziaWG's server.publicKey is a real persisted field the Go backend
reads directly — free-typing a new private key without this would
silently save a mismatched keypair.
Adds a downloadable per-client .conf (amneziawgConfig.ts, mirroring
wireguardConfig.ts) with the obfuscation lines, and an
InboundOption.AwgServer field on the Go side so the config builder
gets the full server block in one round trip.
Along the way, running tools/openapigen surfaced a real bug: it
doesn't flatten anonymously-embedded Go structs the way encoding/json
does, so ServerSettings embedding Obfuscation20 produced a Zod schema
with a nested `obfuscation20` key that never matches the real wire
JSON. Fixed by un-embedding (flat fields + an accessor method) and
registering internal/amneziawg in the generator's own package list,
which had been silently emitting a dangling schema reference.
English and Russian translations are complete; the other 10 locale
files still fall back to English for the new keys.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): complete frontend parity for the Inbounds list page
The Clients page (form, CRUD, QR/config) already worked from the
prior commit; this closes the remaining gap on the Inbounds side and
in a couple of protocol allowlists that a plain search for existing
wireguard/mtproto handling turned up.
lib/xray/inbound-link.ts gets amneziawg-specific link/config builders
(genAmneziaWGLink/genAmneziaWGConfig, plus the *s fan-out variants)
mirroring the wireguard ones — AmneziaWG has no legacy peers-array to
fall back to, so these read settings.clients directly and add the
obfuscation lines every client must share with the server. Wired into
genInboundLinks generically, and into three consumers that call the
wireguard builders directly rather than through that dispatcher:
QrCodeModal, InboundInfoModal, and InboundsPage's bulk export.
ClientInfoModal, ClientBulkAddModal, and the bulk attach/detach modals
each had their own protocol allowlist that needed amneziawg added
alongside wireguard/mtproto.
Two real gaps surfaced by grepping every remaining 'wireguard' /
Protocols.WIREGUARD hit in frontend/src rather than trusting the
checklist was exhaustive:
- useInbounds.ts's TRACKED_PROTOCOLS gates the deactive/depleted/
expiring/online client counts shown per inbound on the list page;
without amneziawg those counts would silently read zero.
- inbound-tag.ts is an explicit client-side mirror of the Go backend's
port_conflict.go (the file says so itself: "Keep in sync"). It still
only special-cased wireguard for UDP, so an amneziawg inbound would
have fallen through to the TCP default and disagreed with the
backend's own port-conflict math.
Also finishes translating the AmneziaWG UI strings into the 11 locale
files that were still falling back to English (ar-EG, es-ES, fa-IR,
id-ID, ja-JP, pt-BR, tr-TR, uk-UA, vi-VN, zh-CN, zh-TW), matching
en-US/ru-RU key-for-key (26 new keys, verified by count in every file).
Not run anywhere: npm run typecheck / build. This machine has neither
Node nor npm, so nothing here has compiled — reviewed by hand plus
brace/paren balance checks and cross-referencing the generated Zod/TS
types. Treat this as needing a real typecheck before shipping.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* docs(install): note that AmneziaWG kernel module install is still manual
Tracked separately (not yet ported into this script) — see
coinman-dev/3ax-ui's install_amneziawg for the reference approach
(ppa:amnezia/ppa). Also serves as a real, path-filter-matching change
to get the previous empty commit's CI trigger to actually fire —
release.yml's push trigger is paths-scoped and an empty commit changes
no files, so it never matched.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): add a button to randomize obfuscation parameters
Mirrors the existing key-regenerate button next to the private key
field. Client-side randomization matches the ranges/constraints of
GenerateObfuscation20's "default" preset (internal/amneziawg/params.go)
closely enough for a form suggestion — the user can still hand-edit any
field afterward.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(install): auto-install the AmneziaWG DKMS module + amneziawg-tools
Ports install_amneziawg from coinman-dev/3ax-ui's install.sh, adapted to
this script's broader distro coverage and NONINTERACTIVE convention:
- Ubuntu/Debian/Armbian: ppa:amnezia/ppa (primary, tested path), with a
reachability pre-check for the Launchpad PPA host — often blocked by
hosting providers, especially Russian VPS — so a flaky network skips
the feature instead of hanging apt through several retries.
- Fedora/RHEL-family, Arch/Manjaro/Parch: best-effort fallback to plain
wireguard-tools (+ AUR amneziawg-dkms via yay/paru when available),
with a manual-install pointer.
- Everything else: manual-install pointer only.
Also installs ndppd and persists IPv4/IPv6 forwarding (for the future
IPv6/NDP phase, not yet wired into the panel) and adds a Secure Boot
warning at the end of the run, since a DKMS-built module is unsigned
and won't load while it's enabled — a common trap on cloud VPS images.
Never fatal: the panel installs and runs fine either way, an AmneziaWG
inbound just won't bring up its tunnel until the module is present.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): resolve all 3 real CI failures (typecheck/lint/codegen)
Found by checking the fork's Actions tab after the last two pushes —
the release build passed (it doesn't run these checks) but the
separate CI workflow caught three real issues:
- golangci-lint (noctx): every internal/amneziawg/manager.go exec.Command
call is now exec.CommandContext with a 30s timeout, so a hung
awg-quick/awg invocation can't block the reconcile job indefinitely
(mirrors internal/mtproto/process.go's own CommandContext usage).
- tsc --noEmit: frontend/src/schemas/client.ts's hand-maintained
InboundOptionSchema (used by the useClients hook, separate from the
auto-generated one in generated/) never got an awgServer field added
when the AmneziaWG frontend work was done — every read of
inbound.awgServer.* in amneziawgConfig.ts was typing as {}. Added
AwgServerOptionSchema, nested (not flattened like wg*) to match what
amneziawgConfig.ts already expects. Also guarded server.publicKey in
inbound-link.ts's genAmneziaWGLink against the schema's optional type.
- codegen staleness: frontend/public/openapi.json is produced by a Node
script (gen:api) this machine can't run; hand-applied the exact diff
the CI failure log already showed (amneziawg protocol enum entry,
ServerSettings schema, InboundOption.awgServer, one example payload),
verified as valid JSON.
Also confirmed independently by this run: install_amneziawg (previous
commit) installed and loaded the DKMS module successfully on both amd64
and arm64 CI runners. The two "Deploy Smoke Tests" failures are
unrelated to this change — this fork has only ever published the
dev-latest pre-release, and GitHub's /releases/latest API deliberately
excludes pre-releases, so the smoke test's no-argument install path
(which resolves "latest") has nothing to find. Not a regression; needs
an actual tagged release whenever that's wanted.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): Phase 2a — IPv6 support + NDP proxy
Adds native dual-stack IPv6 to AmneziaWG inbounds, ported from
coinman-dev/3ax-ui's approach:
- ServerSettings gets ipv6Enabled/ipv6Subnet/ipv6ExternalInterface;
Instance carries the server's own IPv6 address (first host of the
subnet) alongside its IPv4 one.
- defaultAmneziaWGClients allocates an IPv6 host address per client
(second AllowedIPs entry) when the server has IPv6 enabled, reusing
allocateWireguardAddress — which needed a real fix along the way: it
always suffixed "/32" regardless of address family, which is wrong
for an IPv6 host address (needs /128). Now family-aware.
- generateServerConfig's PostUp/PostDown gains IPv6 forward-accept
rules, proxy_ndp sysctl, and one `ip -6 neigh add/del proxy` entry per
enabled peer with an IPv6 address — the lightweight per-client
method, not the ndppd-daemon whole-subnet method (not worth the
config-file-management complexity at this scale; ndppd itself is
still installed by install.sh in case that changes later).
- ValidateIPv6Subnet rejects a malformed subnet before save.
- Frontend: ipv6Enabled/ipv6Subnet/ipv6ExternalInterface fields on the
AmneziaWG inbound form, EN+RU translations, openapi.json/generated/*
regenerated (the latter via `go run ./tools/openapigen`, pure Go).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): fill in IPv6 fields missed by the Phase 2a commit
Two real gaps the CI caught (both new fields, both my miss):
- inbound-defaults.ts's createDefaultAmneziawgInboundSettings() built a
server object literal predating ipv6Enabled/ipv6Subnet/
ipv6ExternalInterface — AmneziawgServer's inferred type now requires
them (zod .default() fields are non-optional post-parse), so this
didn't typecheck at all.
- openapi.json's ipv6Enabled property was missing the description the
real generator attaches (the Go doc comment covering all three IPv6
fields is attached to the first one) — a one-line diff, but git
diff --exit-code doesn't care how small.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): Phase 2b — per-client port-forwarding
Admins can now set a per-client ForwardedPorts string (e.g. "80, 443,
8000-8100") that gets DNAT'd + FORWARD'd to that peer's tunnel address
via iptables rules in PostUp/PostDown, ported and simplified from
coinman-dev/3ax-ui's shared/portfwd.
Two decisions worth flagging for future readers:
- The iptables --comment tag on each rule is awg-fwd-<fnv32a(email)>,
not the raw client email. Email is admin/API-supplied free text that
ends up embedded in a shell-executed PostUp/PostDown line; a hash
can never carry a shell metacharacter through where raw
interpolation could.
- The reconcile manager gained a third fingerprint (portFwdFP, next to
the existing structural/peers ones). `awg syncconf` only touches the
WireGuard peer table — it never re-applies PostUp/PostDown iptables
rules — so a port-forward-only change has to force a full
awg-quick down+up bounce, same as a structural change, rather than
the lighter sync a plain peer add/remove can use.
Also fixes a real pre-existing bug found while wiring up IPv6 client
allocation in the previous commit's spirit: allocateWireguardAddress
always suffixed "/32" regardless of address family, which produced
invalid host bits for IPv6 (needs "/128").
ForwardedPorts flows through model.Client -> model.ClientRecord
(gorm column wg_forwarded_ports, auto-migrated) -> ToRecord/ToClient/
MergeClientRecord, mirroring the awgServer field's earlier lesson
that new fields need checking against a second, hand-maintained
persistence-layer struct.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): route a client's traffic through Xray via the Routing page
Every enabled AmneziaWG inbound gets its own Xray TPROXY bridge
automatically, with no toggle to enable first: a loopback
dokodemo-door inbound (sockopt.tproxy) tagged with the AmneziaWG
inbound's own real tag, so it's already selectable in the existing
Routing page's inbound-tag picker — the same trick the mtproto
sidecar's own bridge already relies on (InboundService.GetInboundTags
is a plain, protocol-blind SELECT over every inbound row's tag, no
dedicated UI plumbing needed).
internal/amneziawg's defaultPostUpDown TPROXYs every peer's traffic
into that bridge unconditionally; the bridge's port is derived
deterministically from the inbound's id (EgressPortForInbound) so the
kernel-side reconcile loop and the Xray-config generator never need to
negotiate a runtime value between them.
injectAmneziawgEgress never generates a routing rule itself — whether
a client's traffic goes anywhere beyond Xray's default routing is
entirely up to whatever rules the admin adds through the existing
Routing UI (pick the AmneziaWG inbound's tag as source, optionally a
specific peer's IP via that page's own Source-IP field, and an
outbound), exactly the same workflow as routing any other protocol.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): recover orphaned interfaces after an ungraceful exit
Two gaps left an AmneziaWG interface stuck outside the manager's
control after a crash (kill -9/OOM/panic skips StopAll):
- ensureRestart's teardown was gated on the in-memory `exists` map,
which is always empty on a fresh process, so a survived interface
never got interfaceDown before interfaceUp tried `ip link add`
against a name the kernel already had — failing forever and never
populating m.ifaces, so traffic accounting silently stopped and the
inbound could never be removed. Gate on isInterfaceUp instead, which
checks real kernel state rather than this process's own bookkeeping.
- An inbound deleted from the database entirely while the panel was
down has no entry in `desired` ever again, so it never reaches the
per-id cleanup loop in Reconcile (which only walks m.ifaces). Add a
one-time sweepOrphansLocked scan of configDir, mirroring
mtproto.Manager.sweepOrphansLocked, that tears down and removes any
leftover interface/config not in the current desired set.
Found by the automated review on MHSanaei/3x-ui#6105 (Finding 1).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* i18n(amneziawg): backfill IPv6/obfuscation/port-forwarding keys in 11 locales
Only en-US/ru-RU ever got these 9 keys as each AmneziaWG feature landed
(the regenerate-obfuscation button, then Phase 2a's IPv6 fields, then
Phase 2b's per-client ForwardedPorts) — the other 11 locale files were
never backfilled, so i18next has been silently falling back to English
for all of them since Phase 1. Cosmetic-only (never broke anything),
but now closed for every shipped locale.
* fix(amneziawg): resolve 7 Medium findings from the automated PR review
Each is independently reproducible; fixed together since one review pass
found all of them.
- manager.go: the shared "ip rule add fwmark" policy route had no
existence check, so it duplicated in "ip rule show" on every interface
bounce (which hostRulesFingerprint forces on any client add/remove/
re-IP). Now checked via "ip rule list | grep -q ..." first. (Finding 2)
- params.go: ExternalInterface, IPv6ExternalInterface, and subnetIp/
subnetCidr are interpolated unescaped into a shell-executed PostUp/
PostDown line, but only obfuscation and the IPv6 subnet were validated
before save. Added ValidateInterfaceName (a strict charset+length
pattern) and ValidateSubnetIPv4 (netip.ParsePrefix), wired into
normalizeAmneziaWGSettings. (Finding 3)
- amneziawg_job.go: IsAwgInstalled() existed but nothing ever called it,
so a host without awg/awg-quick (the Docker image, RHEL, Arch, a failed
install.sh PPA step) logged a reconcile failure every 10s forever. Now
checked once an inbound actually needs it, warning once instead of
spamming. (Finding 4)
- client_inbound_apply.go: the WireGuard/AmneziaWG credential
carry-forward (added so a metadata-only client edit doesn't rotate
keys) never covered ForwardedPorts, so a partial edit -- an API call or
Telegram-bot toggle that omits the field -- silently wiped a client's
port-forwarding spec. Carried forward and written back the same way the
key fields already are. (Finding 5)
- manager.go: hostRulesFingerprint keyed each peer on its IPv4 address
only, and structuralFingerprint omitted IPv6Enabled/IPv6ExternalInterface
entirely, so an IPv6-only change could pick the syncconf reload path
(which never re-runs PostUp, leaving a stale NDP-proxy entry) or be a
complete no-op. Both fingerprints now cover the IPv6 fields. (Finding 6)
- port_conflict.go: the AmneziaWG egress bridge (injectAmneziawgEgress)
binds 127.0.0.1:63100+id with no collision check anywhere, since it
isn't a database row the ordinary port-conflict query can see -- same
blind spot the reserved Xray API port already has its own check for.
Added the equivalent check for the AmneziaWG bridge port. (Finding 7)
- install.sh: install_amneziawg ran unconditionally for every install/
update, building a DKMS kernel module and enabling host-wide IPv4/IPv6
forwarding whether or not the feature is ever used. Gated behind a new
should_install_amneziawg (XUI_INSTALL_AMNEZIAWG=true/false, or an
interactive y/N prompt defaulting to no). Also replaced the deprecated
apt-key adv with a dedicated keyring + signed-by= on the Debian branch,
and guarded its sources.list appends against duplication on a retried
install. (Finding 8)
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): make the Xray TPROXY bridge a per-inbound opt-in
Addresses Finding 10 from the automated PR review: an always-on TPROXY
bridge makes every AmneziaWG tunnel hard-depend on Xray being up (all
traffic, including DNS, drops whenever Xray restarts), and forces a full
awg-quick down+up bounce on any client add/remove/re-IP, permanently
losing the syncconf fast path.
Adds ServerSettings.RouteThroughXray (off by default):
- defaultPostUpDown only emits the TPROXY/policy-route rules when it's
on; a plain AmneziaWG tunnel now has zero Xray dependency out of the
box.
- structuralFingerprint covers it (toggling it changes whether PostUp/
PostDown contain any TPROXY rules at all -- structural, not a
per-peer host-rule). hostRulesFingerprint's IPv4 tracking is now
itself conditional on RouteThroughXray (and IPv6 tracking on
IPv6Enabled), so an instance that never uses either keeps the
syncconf fast path for a plain peer re-IP.
- injectAmneziawgEgress only creates a bridge for inbounds that opted
in; checkAmneziawgEgressConflict (the Finding-7 fix) now parses each
candidate through InstanceFromInbound so a non-routed inbound's port
is correctly never treated as reserved.
- New inbound-level Switch in the AmneziaWG form; the actual outbound
decision is still made entirely through the panel's stock Routing
page, same as before -- only whether the bridge exists at all is now
a choice.
Translation keys added to all 13 locales in the same commit this time,
not backfilled later (see Finding 9's lesson).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): resolve 4 Low findings from the automated PR review
- manager.go: serverAddress assumed subnetIp always ends in ".0"; a
base like "10.8.1.5" was used verbatim as the server's own address,
eventually colliding with peer allocation (which starts at .2
upward). Now derives the first host of the actual subnetIp/subnetCidr
network via netip, matching serverAddressV6's own approach. A /32
base (no host bits at all) is still used as-is. (Finding 12, partial
-- the /16 pool-widening half of this finding only exists on the
upstream-pr/amneziawg branch's merged client_wireguard.go, not here;
handled separately on that branch.)
- manager.go: ensureLocked carried the previous per-peer traffic
counters (`last`) forward even through a full restart, but
awg-quick down+up resets the kernel's own counters to zero -- the
next CollectTraffic computed a large negative delta (clamped to 0),
silently discarding real traffic. Extracted the decision into
nextTrafficBaseline: only a reload (syncconf) preserves the
baseline. (Finding 13)
- portfwd.go: exported ForwardedPortsInclude; inbound_amneziawg.go's
new checkForwardedPortsConflict uses it to reject, at save time, a
client's forwardedPorts that would DNAT the panel's own port or
another enabled inbound's port to the tunnel client --
portForwardLines has no destination restriction, so this collision
was previously silent. Wired into both the single-client update path
and the add-client path (client_inbound_apply.go), plus
normalizeAmneziaWGSettings for the whole-inbound save path. (Finding 14)
- inbound.go: InboundOption.AwgServer sent the whole ServerSettings
struct including PrivateKey to GetInboundOptions callers -- a
shared, admin-wide dropdown-filling endpoint the frontend's own
AwgServerOptionSchema never reads that field from. Redacted it
before assigning. (Finding 11)
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): don't widen the peer address pool past AmneziaWG's own subnet
Completes Finding 12 from the automated PR review (the serverAddress half
of this finding was already fixed on main and cherry-picked here). This
half is specific to this branch: allocateWireguardAddress's /16
pool-widening fallback is an independent addition from upstream's own
main that this branch inherited during the cherry-pick rebase -- it
doesn't exist on the fork's own main at all, so this fix can't be
cherry-picked the normal way and is committed directly here.
Widening is safe for WireGuard's own Xray-native inbound (AllowedIPs
isn't tied to a strict kernel interface subnet), but AmneziaWG's kernel
interface Address is exactly the configured subnet -- an address
allocated from the containing /16 once the /24 fills up would be
silently unroutable. allocateWireguardAddress now takes an explicit
allowWidening bool: WireGuard's own caller passes true (unchanged
behavior), AmneziaWG's passes false (fails loudly on exhaustion instead).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* docs(docker): note that AmneziaWG doesn't work in this image
Investigated: the image is Alpine-based, and AmneziaWG's own packaging
(DKMS module + amneziawg-tools) doesn't target Alpine/musl at all --
unlike the Debian/Ubuntu/Fedora/Arch paths install.sh already handles,
there's no package to apk add even with full host network/capabilities.
The panel already degrades gracefully (IsAwgInstalled() logs one warning
instead of retrying forever), so no code change is needed -- just made
the reason explicit at the point where a user would reach for cap_add/
network_mode to try to work around it.
* fix(sub): include amneziawg inbounds in subscription links
getInboundsBySubId's SQL protocol allowlist never had 'amneziawg' added,
so every AmneziaWG client was silently excluded from all three
subscription formats (plain/individual links, JSON, Clash) and from the
Telegram bot's QR/individual-link buttons, which fetch through the same
path. genAmneziaWGLink itself was already fully implemented and already
wired into GetLink's dispatch switch -- it just never got a chance to
run. Same bug shape as the earlier TRACKED_PROTOCOLS frontend gap: a
hardcoded protocol list one entry short.
Found while investigating whether the Telegram bot needed AmneziaWG-
specific client-management code -- it doesn't (the bot itself is fully
protocol-agnostic), but this is the actual root cause of "can't share
an AmneziaWG client's config via the bot."
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(inbound): enforce node-eligibility server-side, not just in the UI
Investigated multi-node interaction with AmneziaWG: the master's own
reconcile (DesiredAmneziaWGInstances) and Xray config generation
(injectAmneziawgEgress, the GenXrayInboundConfig protocol skip) all
correctly filter on NodeID IS NULL, so a node-assigned AmneziaWG (or
MTProto) inbound would never be managed by the master. But nothing
stopped one from being created that way: NODE_ELIGIBLE_PROTOCOLS
(frontend/src/pages/inbounds/form/InboundFormModal.tsx) only hides the
node picker client-side -- a direct API call could set nodeId on an
AmneziaWG inbound, which every node then reconciles as an ordinary
local inbound (nodes run the identical binary, full cron suite
included), leaving it running unmanaged and untracked by the master's
own AmneziaWG bookkeeping.
Added isNodeEligibleProtocol (inbound_protocol.go), mirroring the
frontend's allowlist, and enforced it in both AddInbound (the actually
exploitable path -- nodeId comes straight from the request) and
UpdateInbound (defense in depth; NodeID is already restored from the
stored row there before this check, so it mainly guards against a
protocol change on an existing node-hosted inbound).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): allow TPROXY-marked traffic through a default-deny INPUT chain
TPROXY never rewrites a packet's own destination address, only the routing
decision. A default-deny firewall whose INPUT chain sanity-checks "is this
destination actually local" (UFW's ufw-not-local, via addrtype --dst-type
LOCAL, is a concrete example) silently drops the redirected packet before
Xray's socket ever sees it -- RouteThroughXray looked fully configured
(TPROXY rule present and counting, Xray listening with IP_TRANSPARENT set)
yet every peer's traffic vanished with no trace on either side.
Adds an idempotent, never-torn-down "iptables -I INPUT 1 -m mark --mark
<fwmark> -j ACCEPT" alongside the existing shared policy route, so this
works regardless of which firewall manager owns the rest of the INPUT chain.
* fix(frontend): give AmneziaWG the same UDP tag and its own tag color
The Inbounds list only special-cased isWireguard/isHysteria for the "UDP"
network badge, so an AmneziaWG row showed just the bare protocol tag with
no transport badge next to it. Added the missing isAmneziawg flag (mirrors
isWireguard exactly) and wired it into the same branch.
Client-row protocol-color maps in ClientsPage/HostList had no amneziawg
entry, silently falling back to grey -- ClientInfoModal already had
amneziawg: 'yellow' from earlier work, these two just never got it.
* feat(logs): show which AmneziaWG client an access-log line belongs to
The dokodemo-door TPROXY bridge every AmneziaWG peer's traffic is routed
through has no per-user identity, so Xray's own access log never carries an
"email:" token for these lines -- the Access Logs modal showed a blank
Email column for every in-*-udp row, even though every other protocol's
rows show the client normally.
The peer's decapsulated tunnel IP does survive as the log's "from" address,
and that IP deterministically maps to exactly one configured peer. Builds a
"<inbound tag>|<ip>" -> email index from the same AmneziaWG inbounds already
parsed elsewhere (amneziawg.InstanceFromInbound), and fills in Email from it
whenever the raw log line didn't have one.
* fix(amneziawg): enable sniffing on the TPROXY bridge
Domain-based Routing rules could never match RouteThroughXray traffic: an
AmneziaWG peer resolves DNS itself, through the tunnel, before ever sending
a packet, so the decapsulated traffic TPROXY hands to the bridge is already
a bare destination IP with no domain name attached at the network layer.
Every other inbound recovers this via sniffing (confirmed working for the
stock wireguard inbound, which does have it configured); the bridge never
got a sniffing block at all, so only tag/IP/network-based rules could ever
match it -- any domain rule above it in the list was silently unreachable.
* docs: add an AmneziaWG config page and list it as a supported protocol
Closes the PR checklist gap: the feature shipped with zero mention on
the docs site. Mirrors reality.mdx's structure (key settings, setup
steps, config excerpt) and notes the Docker/multi-node/Telegram-bot
caveats the PR itself is honest about not having confirmed.
* fix: address the fresh review round on PR #6105 (8 findings)
1. hostRulesFingerprint didn't account for ForwardedPorts when
RouteThroughXray was off, so re-IPing a peer with port-forwarding
configured left stale DNAT rules pointing at an address the next
peer could be handed.
2. Server/client config values (keys, email, I1) were never validated
for control characters before being written into the generated
.conf; a newline could smuggle a PostUp hook into awg-quick's
parser. Added ValidateConfigValue at save time and a
sanitizeConfigValue backstop at render time.
3. checkForwardedPortsConflict didn't scope to node_id IS NULL, so a
port used only on a different node produced a false collision; also
hoisted the panel-port/inbounds lookup out of the per-client loop
(portConflictContext) so N clients cost one query, not N.
4. PostDown commands were ";"-joined and abort on the first failure;
appendOrTrue makes teardown best-effort so an external firewall
flush can't leave DNAT rules to accumulate across bounces.
5. The "ip rule list | grep -q" existence check could SIGPIPE under
pipefail and re-add a duplicate rule; switched to grep -c >/dev/null.
6. Ported the vpn:// share-link format (base64url of the plain .conf
text, matching the real AmneziaVPN app) onto this branch -- it had
only ever landed on our own fork's main, so this PR branch was still
on the old amneziawg://+query-params scheme our own docs no longer
described. Also corrected the docs' install.sh claim (opt-in/
interactive, not automatic) and stale pre-opt-in comments in
route_egress.go.
7. install.sh: Arch's ndppd install used pacman -Syu (full system
upgrade) instead of -Sy like every other call in the script; and
should_install_amneziawg re-prompted on every `x-ui update` even
when awg was already installed.
8. CollectTraffic could clobber a concurrent restart's freshly-reset
(empty) traffic baseline with stale pre-restart counters, since
getPeerStats runs lock-free; now checks pointer identity before
writing back. sweepOrphansLocked permanently disabled itself on a
transient os.ReadDir failure instead of allowing a retry.
go build/vet/test and frontend typecheck/lint/build/vitest all pass.
* fix(install.sh): check the live sysctl value, not sysctl.conf text
Reviewer feedback (cherts, PR #6105): grepping /etc/sysctl.conf for the
setting name is unreliable -- many distros split sysctl config across
/etc/sysctl.d/*.conf, and /etc/sysctl.conf can be a symlink into that
directory, so the check can miss an already-active setting (harmless
duplicate append) or match a disabled/commented line (forwarding
silently stays off). Query the live value via `sysctl -n` instead,
which is accurate regardless of which file set it. Applied the same
fix to both the IPv6 and IPv4 checks for consistency.
* fix: update inbound_amneziawg.go to the split buildInboundForLocalRuntime
Same fork-only-file blind spot as the one caught on our own main after
the 3.6.0 sync: upstream split buildRuntimeInboundForAPI into
buildInboundForNodePush / buildInboundForLocalRuntime (part of the
node-sync client-deletion fix, 5bc81dfd), updating every call site it
could see. This file doesn't exist upstream, so it kept calling the
old name even after the branch merged in that commit.
* fix(frontend): recognize AmneziaWG's vpn:// scheme in share-link labels
The shared link-tag/label helper (used by the client info modal, QR
modal, and subscription page) had no entry for the vpn:// scheme
AmneziaWG links use, so it fell through to the generic fallback: a
plain "Vpn" tag with no color, and an empty remark/port that made the
row's title fall back to "Link N" instead of the inbound's actual
name:port — unlike every other protocol, which shows its real tag and
label.
vpn:// links are base64url of a plain .conf text (matching the real
AmneziaVPN app's own share-link format), not a structured URL, so
there's no query string or #hash to read a remark/port from. Decode
the payload and pull the remark/endpoint back out of the .conf text
directly instead.
* fix(xray): force a full restart for TPROXY inbounds, never hot-add them
Real incident: an AmneziaWG inbound with RouteThroughXray enabled lost
all internet on that connection after a migration. Root-caused on the
live box -- iptables TPROXY counters were incrementing (packets
correctly redirected to 127.0.0.1:63110), but nothing was actually
listening there (ss showed nothing on that port) until a full
`systemctl restart x-ui`, after which the bridge came up immediately.
Xray-core's gRPC AddInbound reports success for a new sockopt.tproxy
inbound (internal/amneziawg's own Xray egress bridge is the only kind
this fork ever generates) but doesn't reliably bind a working listener
for it outside of process startup -- the bridge silently never comes
up, and RouteThroughXray traffic goes nowhere until the next full
restart happens to occur for an unrelated reason.
diffInbounds already has this exact defensive pattern for REALITY
inbounds ("a gRPC remove+add does not reliably rebuild the REALITY
authenticator"), just never extended to TPROXY, and only in the
already-existing-then-changed branch -- the "brand new inbound" branch
had no such guard at all, which is exactly the path a freshly-enabled
RouteThroughXray bridge takes. Added inboundUsesTproxy and wired it
into both branches.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): flag Xray for resync when a peer edit changes qualifying state
Real production bug, root-caused on iiadmin-vps: updateAmneziaWGInbound/
AddInbound/DelInbound only ever updated the kernel interface via
amneziawg.GetManager() -- they never called SetNeedRestart the way every
other protocol's mutation path does (client_crud.go, inbound.go, etc. all
do). injectAmneziawgEgress's TPROXY bridge inbound depends on
InstanceFromInbound finding at least one qualifying peer plus
RouteThroughXray, so an edit that flips that (first peer added, last one
removed, RouteThroughXray toggled on) previously required a full panel
restart before the bridge actually got created, with no error anywhere:
the kernel interface would handshake fine, but traffic redirected into the
bridge's TPROXY port went nowhere because nothing was listening there.
diffInbounds/inboundUsesTproxy already correctly force a full restart for
a brand new TPROXY inbound (bdee0a20) -- that part was never the bug. The
gap was entirely upstream: nothing ever told Xray a resync was even needed.
* fix(clients): reject AllowedIPs already used on another WireGuard/AmneziaWG inbound
defaultWireguardClients/defaultAmneziaWGClients only ever checked uniqueness
against their own inbound's client list, so two inbounds sharing a subnet
(same protocol or not) could silently hand out or accept the same address --
the exact scenario behind a real duplicate-IP incident where a WireGuard and
an AmneziaWG client both ended up on the same address. otherTunnelAllowedIPs
now collects every address already claimed on every other tunnel inbound and
folds it into both the auto-allocation pool and the manual-entry collision
check, naming the other inbound in the error when it fires.
* fix(frontend): add the missing AmneziaWG config download on the sub page
The subscription page already gave WireGuard links their own "Config"
block (copy/download/QR of the actual .conf, via wireguardConfigFromLink
reversing the wireguard:// query params) but had no equivalent for
AmneziaWG's vpn:// links -- its isWireguardLink gate never matched them,
and no reverse-parse helper existed for this page specifically. Every
other surface (InboundInfoModal, ClientInfoModal, ClientQrModal) already
had this parity; this was the one page that didn't.
Fixed by adding amneziawgConfigFromLink (inbound-link.ts), simpler than
its WireGuard counterpart since a vpn:// payload already *is* the plain
.conf text -- just base64url-decode it, no query-param reconstruction
needed -- and wiring it into SubPage.tsx alongside the existing WireGuard
block, reusing the same pages.clients.amneziaWgConfig label the other
three surfaces already use.
* fix(xray): force a full restart for password-auth SOCKS5 hot-apply
Real production incident: editing a client under an AmneziaWG inbound
left its embedded SOCKS5 relay's settings byte-different (a new account
list), and Xray's gRPC remove+add hot swap silently dropped the account
for a peer whose email contained non-ASCII characters -- its tunnel kept
handshaking fine but all its traffic got rejected at the SOCKS5 layer,
while every other peer on the same relay was unaffected. A full restart
(reading the same JSON straight from disk) always produced the correct
account list. socks isn't in userDiffableProtocols (that only covers
vless/vmess/trojan's clients+email shape, not accounts+user), so any
settings drift on this inbound fell through to the generic remove+add
path. Forces a restart instead, the same defensive choice already made
for REALITY and TPROXY -- scoped to auth:"password" specifically so the
other, noauth SOCKS5 bridges (panel/node/mtproto egress) keep the cheaper
hot path.
* Fix Attach reusing one identity's address across wg/awg inbounds
ClientService.Attach deliberately copies one identity's stored
AllowedIPs into every WireGuard/AmneziaWG inbound it's attached to
in the same call, so the same person gets the same tunnel address
on every protocol they use. Its loop calls addInboundClient once per
inbound, and each of those independently computes
otherTunnelAllowedIPs -- so by the second inbound in the batch, the
first inbound's just-written copy of this identity's own address
looked like a cross-inbound collision against itself.
Real production symptom this caused: detaching then re-attaching a
client to both wg and awg failed with "wireguard: allowedIPs entry
X is already used by a client on inbound 'awg' (#N)" -- the exact
address the identity is supposed to keep, rejected as if it belonged
to someone else.
Add a selfEmails exclusion to otherTunnelAllowedIPs and populate it
from the client(s) being processed at the one real call site. Safe
unconditionally: ClientRecord.Email is globally unique, so a match
can only ever be this same identity's own entry on a sibling inbound,
never a genuine different client's address.
Reproduced the underlying mechanism live (manual entry correctly
rejected as a cross-inbound collision; fresh auto-allocation
correctly avoided a used address) before writing the fix, to confirm
the guard itself works and the bug is specifically in how Attach's
per-inbound calls interact with it.
* Attach: allocate fresh when re-attaching with no active tunnel
The previous fix (82cc69f5) made Attach's own address-reuse
correctly not collide with itself across inbounds -- but it still
always reused an identity's stored AllowedIPs verbatim, even when
that identity currently has zero WireGuard/AmneziaWG attachments at
all. A real report from testing this live: an identity fully
detached from both its wg and awg inbounds, then re-attached, got
its old address back even though several lower addresses were free
-- because nothing about being fully detached ever cleared the
stored value Attach copies from.
Add hasTunnelAttachment, checked once against the identity's CURRENT
inbound set before Attach's loop runs: if none of its current
inbounds is WireGuard/AmneziaWG, clear the stored AllowedIPs so this
attach allocates fresh (matching what a brand-new client would get)
instead of resurrecting an address nothing reserves anymore. Left
alone when the identity already has an active tunnel elsewhere, so
extending it to a second protocol still keeps a consistent address.
* Fix TestOtherTunnelAllowedIPsExcludesSelfEmail's own test setup
CI caught this: the "genuinely different client" (other@wg) was
seeded onto the SAME inbound passed as excludeID, which
otherTunnelAllowedIPs already excludes entirely regardless of the
selfEmails fix -- so the assertion that its address is still
reported could never have passed, proving nothing either way. Move
it onto the sibling inbound alongside shared@id, which is what the
test actually needs to exercise (two clients on one sibling, one
excluded by email, one not).
* Attach: never inherit an address that doesn't fit the target inbound
hasTunnelAttachment (from the earlier fix, commit 51067f16) only
asked "does this identity have ANY tunnel attachment", treating that
as license to reuse its stored address verbatim on every inbound
being attached. Real production case this missed: an identity's
stored address came from WireGuard's own fallback subnet
(10.0.0.0/24, used when that inbound has no other clients to infer a
base from), then got attached to a second, AmneziaWG inbound
configured for a completely different subnet (10.8.1.0/24).
defaultAmneziaWGClients's already-set-AllowedIPs branch only checks
for collisions, never subnet membership, so the mismatched address
was accepted silently -- producing a peer that can never actually
connect, since an AmneziaWG address must fall inside the kernel
interface's own configured subnet to be routable at all.
Add addressesFitAmneziaWGInbound, checked per inbound inside Attach's
loop: if the inherited address doesn't fit the SPECIFIC inbound being
attached, clear it just for that one so it gets a fresh, valid
allocation instead, while other already-attached inbounds keep their
existing values. WireGuard has no equivalent strict subnet
requirement (allocateWireguardAddress can widen to a fallback pool
for it), so this only ever constrains AmneziaWG targets.
* Give WireGuard an explicit, admin-configurable subnet field
WireGuard previously had no configurable subnet at all -- only an
implicit one, either inferred from existing clients' own addresses
(wireguardAllocationBase) or a hardcoded 10.0.0.0/24 fallback when
none exist yet. AmneziaWG, by contrast, has always had a real
server.subnetIp/subnetCidr field in its settings, editable in the
UI. User request: give WireGuard the same treatment.
Backend: explicitWireguardSubnetBase reads an optional subnetIp/
subnetCidr pair from the inbound's own settings JSON (mirroring
AmneziaWG's defaultAmneziaWGSubnetBases). defaultWireguardClients
checks it first; only when unset does it fall back to today's
inference-from-existing-clients behavior, so an inbound saved before
this field existed keeps working exactly as it always has.
Frontend: subnetIp/subnetCidr added to WireguardInboundSettingsSchema
and the inbound form (mirroring AmneziaWG's own field layout/labels),
with a real default (10.0.0.0/24, the same value the backend already
fell back to) seeded for newly created inbounds so the field starts
populated and editable rather than blank. Translated across all 13
locales.
This also structurally closes the class of bug fixed in
82cc69f5/291c47b3: with wg and awg subnets explicit and
independently controllable, an admin who wants matching addresses
across both protocols can configure them to actually agree, instead
of one silently inheriting the other's incompatible range.
* Split the client edit form's AllowedIPs into per-protocol fields
A client attached to both WireGuard and AmneziaWG shared one AllowedIPs
form field with a dynamically-switching label, so its two genuinely
different addresses could never both be shown or edited correctly.
Worse, Update/Create broadcast that one shared value to every attached
wg/awg inbound with no subnet-fit check, so an ordinary edit save could
silently overwrite one protocol's address with the other's -- the same
bug class already fixed for Attach, but reachable from any client edit.
model.Client gains an optional AllowedIPsByInbound map so a caller can
send distinct values per inbound; Update/Create honor it and, when it's
absent, clear a shared value that doesn't fit an AmneziaWG inbound's own
subnet instead of writing it through. A new TunnelAllowedIPsByInbound
read path feeds the real per-inbound address to the client edit form via
GET, which now renders two separate, correctly-labeled fields whenever
both protocols are attached (unchanged single dynamic field otherwise).
* Regenerate openapi.json for the new allowedIPsByInbound field
Follow-up to 878ee839: gen:zod (frontend/src/generated) was already
regenerated and committed, but gen:api (frontend/public/openapi.json)
wasn't, so CI's codegen drift check failed.
* Fix build breakage from merging upstream main: Update() gained a limitHwid param
Two of our own AllowedIPs tests (not present upstream, so the merge never
flagged them as conflicting) still called the old 3-arg Update(inboundSvc,
id, client) -- upstream's hardware-ID-limit feature added a required
limitHwid parameter that every other caller in this package already
passes. Also drop createDefaultInboundSettings from InboundsPage.tsx: the
merge conflict resolution kept the import, but upstream's clone-payload
refactor (buildClonePayload, inbound-clone.ts) already calls it
internally now -- this file doesn't need it directly anymore.
* Fix real bug: AmneziaWG clients rejected as "empty client ID" in 3 places
Three switch statements on inbound.Protocol handle "wireguard" explicitly
(checking client.PublicKey) but fall through to the default case for
"amneziawg" (checking client.ID, which AmneziaWG clients never set --
they use PublicKey/Email like WireGuard, not the VMess/VLESS UUID field).
This is what the 4 AllowedIPs tests were actually catching:
UpdateInboundClient's newClientId derivation hit this same default branch,
so every Update() on an AmneziaWG client returned "empty client ID"
before ever reaching the AllowedIPs logic being tested.
Fixed by adding "amneziawg" alongside "wireguard" in each switch:
addInboundClient's per-client validation, UpdateInboundClient's
newClientId derivation, and AddInbound's per-client validation (the
third one wasn't hit by these tests, but has the identical bug -- creating
a brand-new AmneziaWG inbound with a client attached would fail the
same way).
* refactor(amneziawg): rename Obfuscation20 to Obfuscation31, drop the dead mobile preset
Mechanical rename ahead of the AmneziaWG 3.1 parameter work: the type,
generator and prose all said 2.0, and the "mobile" generator preset was
reachable only from its own test. No behavior change.
* feat(amneziawg): AmneziaWG 3.1 obfuscation parameters (backend + generated schemas)
Adds the 3.1 parameter surface to the inbound settings and both Go config
emitters: I2-I5 signature packets, HeaderProtectionKey (base64 32-byte,
shared server<->client), ContentPaddingAddition, the five handshake-timing
randomization ranges (RekeyAfterTime/RekeyTimeout/RejectAfterTime/
KeepaliveTimeout/MaxHandshakeAttempts), and the RandomTrailers/
DisableCookies switches. Freshly generated sets fill everything except
I2-I5 (matching Amnezia's own generator) with jittered ranges bracketing
WireGuard's stock timing constants; every reject window starts >= 30s
above the rekey window by construction. Empty fields stay off the wire,
so blanking a field disables just that feature.
Validation generalizes the H1-H4 range checker for the new uint32-range
fields, requires min 1 on timers, cross-checks rekey-vs-reject, and
demands a real 32-byte base64 header-protection key. The manager warns
once per process when the installed awg tools predate 3.1 but an inbound
uses 3.1 parameters (awg-quick rejects unknown keys with a generic
error otherwise); apply still proceeds.
Requires amneziawg-tools v3.1.20260812+ / module or amneziawg-go
v3.1.20260814+ on the host.
* feat(amneziawg): emit and randomize 3.1 parameters in the frontend
Both client-config emitters (the vpn:// link builder and the clients-page
.conf builder) now carry the 3.1 [Interface] lines in the same order as
the Go emitters. The obfuscation randomizer moves out of InboundFormModal
into a shared lib/xray/amneziawg-obfuscation.ts that also fills the new
fields, and createDefaultAmneziawgInboundSettings switches from static
values to that generator — a fresh inbound now really gets the unique
fingerprint the docs promise instead of the same jc=5/jmin=10 set on
every install.
Schema parse-time defaults for the new fields stay ''/false on purpose:
real values come only from the generator, so resaving an inbound never
mutates its stored parameters. A new parity test pins the hand-written
AmneziawgServerSchema to the generated ServerSettings key set, so a field
added on one side can no longer silently vanish from configs.
* feat(amneziawg): 3.1 form fields and translations
Inbound form gains inputs for I2-I5, HeaderProtectionKey (filled by the
existing obfuscation Regenerate button), ContentPaddingAddition, the five
timing ranges, and the RandomTrailers/DisableCookies switches; the MTU
input picks up the min=1 its schema already enforced. All 13 locales get
the 19 new keys and drop the "2.0" branding from the s3/s4/i1 labels.
* docs(amneziawg): document 3.1 parameters; install.sh kernel/version notes
The AmneziaWG page's obfuscation section moves from the 2.0 to the 3.1
parameter set: table rows for I2-I5, HeaderProtectionKey,
ContentPaddingAddition, the timing-randomization ranges and the
RandomTrailers/DisableCookies switches, a requirements callout (tools
v3.1.20260812+, module/awg-go v3.1.20260814+, Linux 6.7+ for the DKMS
path), and a sample client .conf that matches what the panel actually
emits (including the DNS defaults and PersistentKeepalive it always had).
install.sh warns before a DKMS build on a pre-6.7 kernel and after any
install that left pre-3.1 amneziawg-tools on PATH.
Also updates the hosts API operation paths ({id} -> {groupId}) in the
stale ru/zh/fa reference pages: syncing docs/public/openapi.json for the
new AmneziaWG schema fields surfaced that rename, which had never been
copied over, and the docs build fails on paths missing from the spec.
* fix(amneziawg): reject control characters and canonicalize 3.1 range values
Adversarial review of the 3.1 work surfaced a validation gap:
base64.DecodeString silently ignores CR/LF, so a header-protection key
that picked up a line wrap in transit decoded to a valid 32 bytes,
passed validation, and was emitted verbatim into every client config —
where the orphan second line breaks the import while the server (whose
emitter strips control chars) keeps running with the correct key. The
key and range validators now reject control characters outright.
Also from the same review: range values are canonicalized on save
("110 - 140" -> "110-140", whitespace-only collapses to feature-off,
closing a case where the server conf rendered an invalid blank-value
line the client emitters omitted); the rekey/reject invariant is now
enforced against WireGuard's 120s/180s defaults when only one side is
set; and the structural fingerprint joins on "\n" instead of "|",
which is a legal I1-I5 character and made adjacent free-text fields
join-ambiguous.
* fix(install): resolve latest release tag via web redirect to dodge API rate limits
The non-interactive install smoke test resolved the release version through
the unauthenticated GitHub API (api.github.com/.../releases/latest), which
allows only 60 requests/hour per IP. The test installs twice in one run, and
on shared CI runner IPs the second call gets rate-limited, returns no
tag_name, and install.sh treats an empty version as fatal (exit 1) — the same
"Failed to fetch x-ui version" real users hit behind CGNAT/shared addresses.
resolve_latest_tag() now reads the tag from the github.com releases/latest
web redirect (not subject to the API rate limit), falling back to the API
only if the redirect yields nothing. Verified with the real
deploy/test/smoke-noninteractive.sh (two installs, both green).
* fix(amneziawg): three review findings on #6105, plus a comment trim
1. A peer's allowedIPs reached the generated .conf unvalidated and
unsanitized, unlike email/publicKey/preSharedKey which
normalizeAmneziaWGSettings already guards. A newline in an entry let a
following "[Interface]" re-open the interface section, whose "PostUp = ..."
awg-quick then runs as root on the next apply. Reproduced end to end
against generateServerConfig. The save path now rejects and canonicalizes
through normalizeWireguardAllowedIPs, and the render path sanitizes as a
backstop for rows predating the validation (an upgrade, a restored backup,
a direct DB edit). H1-H4 get the same render-time sanitize, and the two NIC
name fields a plausibility check, since stripping control characters alone
would still let a shell metacharacter into a root-executed PostUp line.
2. EgressPortForInbound is 63100 + inbound id, so an id past 2435 derives a
port above 65535 -- and Xray rejects the whole generated config over one
invalid port, taking every other protocol down with it. It now reports
ok=false past the range, and both the Xray bridge and its TPROXY rules are
skipped instead of emitting an impossible port.
3. The downloadable AmneziaWG .conf read ClientRecord.allowedIPs, a single
shared column that holds the WireGuard address for an identity attached to
both protocols -- the exact ambiguity tunnelAllowedIPs was added to resolve
for the edit form. The info and QR modals already hydrate that field, so
they now pass this inbound's own address to the builder.
Also trims the comment blocks in the files touched here to the 2-line
guidance in CLAUDE.md: internal/amneziawg alone carried 423 comment lines in
over-long blocks against 118 for the comparable internal/mtproto, and is now
at 110. Every non-obvious constraint is kept (the kernel S1/S2 rule, why
PostDown is best-effort, why grep -c and not -q, why the fingerprints split
three ways); the narration is gone. Two hot_diff.go comments pointed at an
internal/amneziawgnet package and an injectAmneziawgnetSocks function that
exist nowhere in the tree; the checks themselves are unchanged.
* feat(logs): add an AmneziaWG log view to the overview
The overview has an access-log view for Xray but nothing for AmneziaWG, so
when a tunnel misbehaves there is no way to see it from the panel at all. A
kernel tunnel logs no per-request lines, so the equivalent view is built from
the two things it does expose:
- Live per-peer activity from `awg show <iface> dump`, joined to the client
email through the desired peer set: last handshake, endpoint, allowed IPs,
cumulative transfer and online state, newest handshake first.
- The panel's own AmneziaWG event lines (interface up/down, awg-quick
failures, the pre-3.1 tools warning), which are what actually explain a peer
being absent from the table.
POST /panel/api/server/amneziawglogs/:count serves both, with the same
count + filter contract GetXrayLogs uses, and the modal mirrors XrayLogModal's
toolbar, auto-update, mobile cards and download. The action-bar button is
gated on a new status.amneziawg.configured, which stays true while an inbound
exists but its interface is down -- exactly when the event lines matter.
Verified against a running panel: the endpoint returns the peer table and
real event lines ("awg/awg-quick not found on PATH", "create config dir:
permission denied"), and count and filter both narrow as documented.
One of those lines surfaced a Debugf that had been rendering as
"for inbound1:amneziawg:"; fixed here since it is now user-visible.
* fix(amneziawg): stop double-counting a routed inbound's traffic
injectAmneziawgEgress tags its Xray bridge with the AmneziaWG inbound's own
tag, so the stock Routing page can target it. Xray therefore reports that
bridge's bytes under the inbound's tag, and XrayTrafficJob feeds them to
AddTraffic -- which accumulates -- on top of the same bytes AmneziaWGJob
already reported from `awg show dump`. An inbound with routeThroughXray on
counted roughly twice its real traffic, which also inflates the quota checks
that read the same counters.
The awg counters are the complete measure: every peer, whether or not TPROXY
routed it, and the same wire bytes the per-client totals are built from, so
they stay and the Xray rows are dropped. Per-client stats were never affected
-- a dokodemo-door bridge has no per-user identity, so Xray emits no
user>>>email rows for it.
Filtering happens before every consumer, so the DB totals, the external
traffic inform and the dashboard's live speed all read one source per inbound.
The set of bridge tags now comes from a predicate shared with
injectAmneziawgEgress itself, with a test that pins the two together -- naming
one tag too few doubles the traffic again, one too many makes real traffic
vanish.
* fix(amneziawg): align the three .conf emitters on one peer field order
The panel builds an AmneziaWG client .conf in three independent places, and
they disagreed: buildAmneziaWGClientConfig put PresharedKey right after
PublicKey (wg-quick(8)'s own order, and what both WireGuard emitters on the
clients side already use), while genAmneziaWGConfig and the Go
amneziaWGConfigText put it after Endpoint. A user comparing a subscription
link against a downloaded .conf sees the difference immediately, and the
generators are exactly the kind of parallel implementation CLAUDE.md warns
about drifting.
Moves the two outliers onto the wg-quick order. Also drops the stray trailing
newline that only appeared when PersistentKeepalive was set, so a config now
always ends on its last set field whichever that is -- the same shape all
three emitters produce for the same client.
Parsing is unaffected either way (the format is order-insensitive, and the
AmneziaVPN app reads it as a flat key-value bag), so this changes only the
rendered text. Adds a test on each side that pins the peer block's field
order, since nothing previously asserted it.
* refactor(amneziawg): switch to the embedded amneziawg-go/gVisor architecture
Replaces the kernel-module (DKMS) + awg-quick + TPROXY backend with the
fork's own embedded design: amneziawg-go runs in-process over a userspace
gVisor netstack, and each peer's decapsulated traffic relays into its own
loopback Xray SOCKS5 inbound, so Xray's native stats/sniffing/routing work
for free instead of through hand-rolled bridges. No kernel module, no DKMS,
no Secure Boot conflicts, works the same in a container as on bare metal.
- internal/amneziawgnet: new package (Device/UAPI, gVisor netstack, TCP/UDP
forwarding, SOCKS5 relay, peer identity, IPv6 host-alias egress identity,
per-client port-forwarding) - amneziawg-go v3.1.20260814 + gvisor.
- internal/amneziawg: keep the reusable protocol-shape types/validation
(Instance/Peer/Obfuscation, InstanceFromInbound); drop the OS-shellout
half (awg-quick, TPROXY policy routing, NDP proxy, peer-stats parsing).
- internal/web/service: rewire the 5 integration points (job, runtime,
client-apply, web shutdown, xray config) from the old manager to the new
one; the AmneziaWG log view is rebuilt on the embedded Device's own UAPI
dump (extended to carry endpoint/AllowedIPs) instead of `awg show dump`.
- install.sh: drop DKMS/ndppd/TPROXY/Secure-Boot installer code (~250
lines) - an entire recurring class of installer fragility goes away.
- frontend: drop the now-meaningless routeThroughXray toggle (the relay is
always on); keep the field in the Zod schema, unexposed, so it isn't
silently stripped from stored settings on next save - two regression
tests deliberately depend on the Go struct still carrying it.
- docs/i18n: rewrite amneziawg.mdx for the new architecture; drop the
dead routeThroughXray translation keys across all 13 locales.
Real production throughput (embedded core datapath, isolated bench, same
box the kernel-module path was measured on): ~296 Mbit/s up, ~640 Mbit/s
down, vs. 414.69 MB/s (~3.3 Gbit/s) for the kernel module on the same
hardware - a real gap, tempered by this being single-stream/no-SOCKS5-hop
and most VPN traffic being latency-bound rather than throughput-saturating.
* fix(amneziawg): restore the branch's own Obfuscation31 shape + 2 CodeQL findings
The previous push's wholesale-copy of types.go/params.go from the fork's
main branch pulled in that branch's own independent (and incompatible)
naming for the same AWG 3.1 feature set: Obfuscation20/GenerateObfuscation20
instead of this branch's already-shipped Obfuscation31/GenerateObfuscation31,
and a missing CanonicalizeUintRange -- broke every Go CI job (the whole
matrix fails to compile when any one package doesn't, which is why govulncheck/
golangci/postgres-durable-first/race all failed identically, not just go-test).
Restores params.go/params_test.go verbatim from this branch's own last
commit (a strict superset of validation: it already cross-checks rekey vs.
reject timing windows, which the copied version never did) and folds the
3.0/3.1 fields (HeaderProtectionKey, ContentPaddingAddition, the 5 timing
fields, RandomTrailers/DisableCookies) into Obfuscation31 itself, matching
the original struct exactly instead of as separate top-level Instance
fields. instance.go, the two amneziawgnet call sites, and 7 amneziawgnet
test files updated to match. Also drops the one test (sanitizeConfigValue)
that only ever served the retired kernel-module .conf writer -- correctly
not ported, so the test testing it shouldn't have been copied either.
Also fixes 2 CodeQL findings the same push surfaced: a clamped uint64->int64
conversion for the new log view's live byte counters (server.go), and an
unneeded len+len sum feeding a slice pre-size in the v6-egress outbound
merge (xray.go) -- append already grows correctly without it.
* chore(amneziawg): regenerate frontend schemas for updated doc comments
npm run gen was missed after the previous commit's types.go doc-comment
edits (Obfuscation20 -> Obfuscation31, ValidateHeaderProtection ->
ValidateObfuscation in the prose) -- openapigen bakes those comments
into the generated schema's description field, so the committed
frontend/src/generated/schemas.ts and openapi.json still had the old
wording. codegen's git-diff-exit-code check caught it correctly.
* fix(amneziawg): narrow 2 test fixtures that collided with MaxForwardedPorts
TestCheckForwardedPortsConflict_CollidesWithEnabledInboundPort and
..._NoCollisionWhenPortsDontOverlap used "8000-8100"/"9000-9100" as their
ForwardedPorts fixture -- 101 ports each, one over MaxForwardedPorts (100).
The cap check (checkForwardedPortsConflict, added this session alongside
the SOCKS-phantom-port check) fires first, so both tests got "more than
100 forwarded ports" instead of ever reaching the collision logic they're
actually testing. The cap itself has its own dedicated boundary test
already; these two just needed a narrower range that still covers/misses
port 8080 as intended -- 8075-8085 and 9075-9085, 11 ports each.
* fix(amneziawg): checkAmneziawgnetSocksConflict had no receiver in its new home
My merge-conflict resolution kept this as a method call (s.checkAmneziawgnetSocksConflict)
inside checkPortConflictTx, a plain function with no *InboundService receiver --
upstream's #6225 fix moved the port-conflict check out of the (s *InboundService)
method and into this new tx-scoped free function, and I didn't notice the call
site needed to change shape too. CI caught it immediately (undefined: s); nothing
in this specific package can be locally verified past internal/database's own
unrelated, pre-existing CGO build issue on this dev machine.
Since the signature had to change either way, folded in the fix already flagged
as a separate follow-up: checkAmneziawgnetSocksConflict now takes the caller's
db handle instead of fetching its own via database.GetDB(), so it actually runs
inside the same serialized transaction #6225 introduced -- previously it sat
right next to that race fix without benefiting from it.
* fix: address the review findings on the embedded AmneziaWG PR
5 blocking findings:
- Floor S3/S4 at 12 in both obfuscation generators (Go and frontend) and
reject a hand-edited value below that when HeaderProtectionKey is set --
IpcSet requires it, and ~39% of previously-generated sets violated it
silently.
- Guard PrivateKey/PrimaryDNS/SecondaryDNS/remark against newline injection
in the AmneziaWG .conf builder (both the Go subscription-link path and
the frontend downloadable-config path) -- unguarded, any of them could
inject an arbitrary config line into a subscriber's client.
- Bound the derived AmneziaWG SOCKS relay port to <= 65535 once an
inbound's id is known, and check the reverse direction (does the relay
port collide with an existing inbound's port) on both create and update
-- previously only port -> relay collisions were checked, not relay ->
port.
- Gate injectAmneziawgV6Egress on the same V6AliasesActive predicate
desiredV6Aliases already uses, so the two can't disagree about whether a
peer's IPv6 identity is actually active at the OS level.
2 minor findings:
- Fix the forwarded-ports cap check's off-by-one (a spec covering exactly
the cap was rejected as if it were over it).
- Correct docker-compose.yml's stale comment describing the retired
DKMS/kernel-module architecture.
* chore: retrigger CI
build (armv5) failed on a transient Go module proxy network error
(INTERNAL_ERROR stream reset on sagernet/sing), unrelated to this PR's
changes.
* docs: fix doc comments still describing the retired DKMS/awg-quick design
A few doc comments (and one illustrative test log line) survived the
embedded-architecture cutover unchanged and now contradict the code
they sit next to:
- internal/amneziawg/types.go's package comment claimed this package
still owns a Manager that reconciles OS-level interfaces via
awg-quick/DKMS -- that Manager was removed; the reconcile loop lives
in internal/amneziawgnet now, and this package is protocol-shape-only.
- internal/amneziawg/params.go's ValidateObfuscation/ValidateConfigValue
comments cited "awg-quick up" / "awg-quick executes as root" as the
reason to validate -- the server itself never calls awg-quick in this
architecture; the same value still reaches a real rendered .conf that
a client app or an admin's own awg-quick CLI applies downstream, so
the validation is still warranted, just for a different consumer.
Mirrored the same fix in inbound_amneziawg.go's matching comment and
its test's comment.
- internal/amneziawgnet/manager.go's Manager doc comments (x3) pointed
readers at "internal/amneziawg.Manager" for comparison -- that type no
longer exists in this diff at all. Repointed at internal/mtproto.Manager,
the pattern this was actually modeled on and the one that's still real.
- Swapped one test's illustrative "awg-quick up awg2 failed" log line for
a message shaped like this architecture's actual amneziawgnet logging,
so a reader skimming the test doesn't wonder whether the server still
shells out to awg-quick.
No behavior change.
* fix(docs): re-run codegen for xray-settings.mdx after conflict merge
The automated conflict-resolution hand-merge for this generated file
was content-correct but didn't byte-match a real regen (different
YAML long-string folding style). Re-ran npm run gen + docs' gen:api
and kept that canonical output instead.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): drop the dead access-log email backfill
amneziawgEmailIndex keyed peers by "<tag>|<tunnel IP>", a scheme built
for the retired TPROXY bridge where the peer's decapsulated tunnel
address survived as the access log's from-address. The embedded
architecture relays through a loopback SOCKS5 dial, so every AmneziaWG
log line's from-address is 127.0.0.1:<ephemeral> and the lookup could
never match: the index was rebuilt on every log view just to miss.
Remove the index, its GetXrayLogs wiring and its test. If per-line
emails are wanted back, the relay would have to publish a
local-port->email registry for the viewer to resolve loopback sources.
* fix(api): generate AmneziaWGLogs/PeerActivity schemas instead of hand-writing them
The amneziawglogs endpoint's response structs were missing from
openapigen's StructAllow, so they were silently absent from every
generated schema/example, the endpoints.ts entry carried a hand-written
response, and AmneziaWGLogModal.tsx duplicated the shapes as local
interfaces - the exact drift the allowlist rule exists to prevent.
Allowlist both structs with example tags, point the endpoint at the
generated schema, import the generated types in the modal, and sync
docs/public/openapi.json.
* chore(amneziawg): drop the unreferenced quiccapture package
Nothing imports internal/amneziawg/quiccapture and no route exposes it;
its package doc justifies the code as a port of
frontend/src/lib/xray/i1Generators.ts, which does not exist in this
repository, and promises an API round-trip that also does not exist.
1,110 lines of unreachable code with misleading provenance claims.
Revert this commit to bring the package back when the live-capture I1
feature and its frontend counterpart actually land.
* fix(clients): re-run cross-inbound conflict checks on the serialized writer
The new client-level checks - cross-inbound AllowedIPs collisions and
AmneziaWG forwardedPorts conflicts - read a fresh DB snapshot, decide,
and only then enter runSerializedTx, while lockInbound only serializes
writers on the SAME inbound. Two concurrent client creates on two
different tunnel inbounds both passed the read and both committed,
yielding two peers with one address: the exact check-then-claim race
81cfd857 (#6225) closed for AddInbound, which this PR's own
checkAmneziawgnetSocksReverseConflict already cites. Keep the pre-tx
pass for fail-fast UX and re-validate inside the transaction, where the
single writer makes the answer authoritative. The race test drives two
goroutines at two inbounds and demands exactly one winner; it fails
with committed=2 when the in-tx re-check is removed.
* fix(amneziawg): hot-apply depletion disables like mtproto does
applyTrafficMutationBatch special-cases MTProto so a quota/expiry
depletion cuts the sidecar immediately, but AmneziaWG fell through to
runtime AddUser/RemoveUser - explicit no-ops for this protocol - so a
depleted peer kept tunneling until the next 10s reconcile tick. Route
it through applyLocalAmneziaWG, whose own contract (re-read committed
settings, filter depleted clients, push to the interface) is exactly
this case; the comment claiming it mirrors applyLocalMtproto is now
true for the depletion path too.
* fix(amneziawg): persist cleared DNS fields instead of resurrecting defaults
PrimaryDNS/SecondaryDNS marshaled with omitempty, so clearing them
persisted settings with no key at all - and the frontend re-parses
stored settings through a Zod schema whose .default('8.8.8.8') /
.default('8.8.4.4') fire on missing keys, silently repopulating the
form on every load and re-persisting the defaults on the next save.
Blank is a documented, meaningful state (no DNS line in client
configs); drop omitempty so a cleared value survives the round-trip.
The regression test normalizes a server block with cleared DNS and
fails when the keys are dropped.
* fix(amneziawg): accept cleared numeric obfuscation/subnet fields in the form
AntD InputNumber emits null when cleared, Zod .default() only replaces
undefined, and unlike wireguard.ts - whose optionalClearedInt comment
documents exactly this failure mode - the AmneziaWG schema declared
subnetCidr and jc/jmin/jmax/s1-s4 as bare z.number() defaults. Clearing
any of the eight fields made safeParse reject the null and block the
save until the user retyped a value. Absorb null into undefined while
keeping each field's schema default, so a cleared field refills its
documented default and legacy blobs with absent keys behave as before.
* fix(amneziawg): guard the third .conf emitter against newline injection
The review-round fix added the newline guard to amneziaWGConfigText (Go)
and buildAmneziaWGClientConfig, but genAmneziaWGConfig in inbound-link.ts
- the third of the three emitters its own comment says must not drift -
still rendered privateKey/primaryDns/secondaryDns/remark unescaped, so a
newline there injected a config line (e.g. a rogue PostUp) into the
inbound form's downloaded .conf. Add the same guard, plus the regression
tests the original fix shipped without: all four fields on the Go and
both frontend emitters go red if any guard is removed.
* test(amneziawg): pin the S3/S4 floors the TS drift guard claims to mirror
The test's docstring says it mirrors internal/amneziawg/params_test.go,
but it asserted S3>=8/S4>=4 while the Go test and both generators pin
12/12 - the floor ValidateObfuscation enforces whenever a header
protection key is set, which this generator always sets. A regression
narrowing the TS floors into 8-11/4-11 would have passed the drift
guard and produced configs the backend rejects on save.
* docs: restore the pia repo-map entry and document the AmneziaWG subsystem
Merging main dropped CLAUDE.md's internal/pia/ bullet (added by #6272)
while resolving the repo-map conflict - the package itself is untouched.
Restore it, add the missing map entries for the two packages this branch
introduces (internal/amneziawg/, internal/amneziawgnet/), bump the cron
count, and give amneziawg_job its row in architecture.md's 5.4 table.
* chore(amneziawg): correct comments stranded by the architecture pivot
ae77c7e9's cutover to the embedded gVisor path deleted the kernel-module
code but left several comments describing it in the present tense:
hot_diff.go cited the removed service.amneziawgEgressStreamSettings and
wrongly claimed AmneziaWG is the only sockopt.tproxy source (tunnel's
TProxy mode is the live one the guard protects), socks_config.go pointed
at the deleted EgressBasePort/EgressPortForInbound, manager.go referred
to the deleted Manager and its fingerprinting as live code, web.go's
cron registration claimed the job scrapes traffic (its own doc says it
does not), and types.go capped ContentPaddingAddition at uint16 when
validation and upstream both use uint32.
* style(lint): satisfy gofumpt/goimports so make verify is green
json_service.go's two 'Tag: "proxy"}' literals came in with main's own
cc245a90 formatting commit and fail the repo's gofumpt gate for everyone;
the import grouping in inbound_amneziawg.go is from the serialized-writer
fix on this branch.
---------
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
Co-authored-by: claude[bot] <41898282+claude[bot]@users.noreply.github.com>
* fix(node): stop stale expiry sync from undoing client extensions (#6228)
After an expired client is extended on the master, a lagging node could
overwrite client_traffics with an older absolute expiry and latch
enable=false. Reject older absolute expiries on merge, ignore
expiry-stale disables when the master is not over quota, lift stale
lifecycle fields out of adopted settings, stamp reconcile fingerprints
from the pre-lift node blob, and mark the node dirty so the next tick
re-pushes.
* fix(node): lockstep client_traffics expiry/enable SQL with review fixes (#6228)
Make expiry merge keep any master absolute (node only activates when master
is unset/duration). Include this tick's up/down deltas in the enable
stale-disable quota check so a crossing-tick disable is not dropped.
* fix(node): add settings absolute helper for renew/lift guards (#6228)
Expose settingsClientAbsoluteExpiry so traffic merge can tell a real
node auto-renew (settings+stats later) from lagging ClientStats after a
master shorten. Trim lift godoc to the invariant.
* fix(node): authority-aware lifecycle merge for multi-node sync (#6228)
While config_dirty, accumulate traffic only — do not adopt node
expiry/enable/total/reset (and preserve dipped baselines so a false
renew cannot fire after clear). On clean ticks, master absolute expiry
wins; node auto-renew still goes through nodeClientRenewed when settings
also show the later deadline. Defer settings lifecycle lift until after
traffic deltas land, align SyncInbound via applyMasterClientLifecycle,
and avoid re-MarkNodeDirty when already dirty.
* fix(node): clear config_dirty only after the post-reconcile traffic merge (#6228)
After a successful ReconcileNode, keep the node dirty through the same
tick's SetRemoteTraffic so lagging ClientStats cannot clobber the
just-pushed master lifecycle, then ClearNodeDirty.
* test(node): cover dirty-gate, master-absolute, and renew false-positives (#6228)
Add regressions for extend/shorten while dirty, clean-sibling shorten,
settings vs lagging disable, renew recovery after dirty, renew with
matching settings, and shorten+Reset lagging stats not treated as renew.
* fix(node): address the review findings on the lifecycle merge (#6228)
The automated review on #6231 flagged a blocking regression and six smaller
issues. All of them are fixed here.
Blocking: making the master's absolute expiry always win left nodeClientRenewed
as the only channel for a node-side auto-renew, and that required a counter dip.
A client that used no traffic in the period never dips, so its renewal was
dropped, the master kept the expired deadline and disableInvalidClients removed
it with no way back (master-side autoRenewClients skips node inbounds). The node
bumps reset_count on every renewal, so that counter is now an independent
renewal signal and is persisted with the renewal so it keeps converging.
The deferred ClearNodeDirty made every reconcile-success tick merge in dirty
mode, which suppressed inbound adoption, new client_traffics rows, the orphan
sweeps and the whole SyncInbound record loop -- and left the node dirty forever
whenever SetRemoteTraffic errored. The clear goes back to where it was; a
separate justPushed flag now freezes only the client lifecycle merge for the
tick whose push just landed.
staleNodeDisable only recognised a lagging disable by an older expiry, so a
quota top-up (raise totalGB, leave the expiry alone) was re-latched to disabled
by the next lagging snapshot -- the #6228 symptom on a second axis. The
reviewer's suggestion of dropping the expiry precondition outright fails
TestNodeQuotaDisable_SameExpiryStillLatches, because the master's own counters
legitimately sit below a node's after a seeded-at-zero adoption. nodeDisableIsStale
instead compares the limits the node judged the client against with the master's
own: matching limits mean a genuine verdict that still latches (#4917), differing
limits mean the node has not seen the master's change yet. It also now measures
the master deadline against wall-clock now, so an expired master row no longer
looks "extended" merely because the node's copy is older still.
Also: the settings lift now writes enable in both directions, so a blob fetched
before a master disable cannot carry enable=true back into central settings and
on to the node; the renewal guard parses the inbound settings once per inbound
instead of once per renewing client; the adoption loop only writes settings when
they actually changed; and two comments that described mechanisms the code does
not use were corrected.
The test deadlines are now relative to the run: the merge compares against now,
so fixed timestamps would have rotted into the wrong side of it.
---------
Co-authored-by: mrchatam <287639636+mrchatam@users.noreply.github.com>
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
* feat(sub): add SubBalancer model and migration
Client-side JSON-subscription balancer row: remark, strategy, member inbound ids, sort order, enabled. Registered in allModels and migrationModels so AutoMigrate and SQLite->Postgres copy pick it up.
* feat(sub): add SubBalancer service
List/Get/Create/Update/Delete over the sub_balancers table with remark trim, strategy allowlist (leastLoad/leastPing/random) and sort-order floor. Rows are read per request by the subscription builder, so mutations need no xray restart.
* feat(sub): add SubBalancer API controller and routes
GET/POST /panel/api/sub-balancers, POST /:id (update), DELETE /:id and POST /:id/del alias. inboundIds bind from repeated form keys. Mounted under the /panel/api group so the existing API token + CSRF middleware cover it.
* feat(sub): emit client-side balancers in JSON subscription
For each enabled balancer, append one config document whose outbounds are the selected inbounds' proxy outbounds retagged under a per-balancer prefix, with routing.balancers + burstObservatory selecting it. Balancer entries interleave with inbound entries by sort order; on equal numbers the balancer follows the inbound. Skipped when disabled or no member outbound is present.
* test(sub): cover SubBalancer service and JSON output
Service: validation gates (remark/strategy/inbound ids/sort order) and CRUD round-trip. JSON: balancer document shape, sort interleaving with inbounds, disabled/empty skip, and member tag dedup.
* feat(sub): add sub-balancers i18n keys
pages.settings.subBalancers.* block (menu, title, add, desc, field labels, strategy names, sort-order help, validation messages) added to all 13 locales.
* feat(sub): add SubBalancer schema and API queries
Zod schema (entity + form, strategy enum, validation messages wired to i18n keys), react-query hooks for list/create/update/delete, and the sub-balancers query key.
* feat(sub): add subscription balancers settings tab
SubscriptionBalancersTab lists balancers (sort order, remark, strategy, inbound count, enabled toggle, edit/delete) with a form modal (remark, strategy, sort order, multi-select inbounds filtered to multi-client protocols, enabled). Wired into SettingsPage under #subscription-balancers, and the sidebar shows the entry only when JSON subscription is enabled.
* test(sub): add SubBalancer form modal test
Covers add-mode (no validation errors, confirm with parsed values) and edit-mode (seeds from the balancer, preserves strategy/sort order/enabled).
* feat(sub): register sub-balancers in API docs and OpenAPI
Adds the sub-balancers endpoint group to endpoints.ts (list/create/update/delete + POST del alias) and regenerates frontend/public/openapi.json from it.
* docs: sync openapi.json with frontend
docs/public/openapi.json had fallen behind frontend/public/openapi.json (fewer paths/schemas). Copy the current frontend spec so the docs site renders the full API.
* docs: add subscription balancers API reference
Registers the sub-balancers page (generated MDX) and adds the sub-balancers paths to docs/public/openapi.json so the page renders the list/create/update/delete operations.
* feat(sub): accept roundRobin balancer strategy
Add roundRobin to the model oneof tag and the service strategy allowlist, alongside leastLoad/leastPing/random. Covered by a service-level create test that fails on the old allowlist.
* feat(sub): add roundRobin strategy label
pages.settings.subBalancers.strategyRoundRobin added to all 13 locales.
* feat(sub): expose roundRobin in balancer form
Zod strategy enum, form modal label key, and table strategy colour for roundRobin.
* docs(sub): list roundRobin in strategy description
The create/update strategy param description now mentions roundRobin alongside the other three.
* feat(sub): add subJsonObservatory setting
Panel-wide JSON string carrying the burstObservatory ping config (destination, connectivity, interval, sampling, timeout, httpMethod) emitted into client-side balancer docs. Stored like subJsonMux/Rules/FinalMask.
* feat(sub): wire observatory config through sub controller
WithSUBJsonObservatory option; the controller calls SubJsonService.SetObservatoryConfig after construction.
* feat(sub): emit observatory conditionally with configurable probes
burstObservatory is emitted only for leastPing/leastLoad; random/roundRobin get none (no fallback, so an observatory would only probe for nothing). Probe params come from the subJsonObservatory setting, falling back to the built-in defaults when empty or partial. Test covers the conditional emit and the override.
* feat(sub): add subJsonObservatory to AllSetting model
Frontend AllSetting model and Zod schema carry the new panel-wide observatory config string.
* feat(sub): add balancer observatory config card
New Sub Formats tab editing destination/connectivity/interval/sampling/timeout/httpMethod, stored as JSON in subJsonObservatory. Toggle off clears the setting; the backend then falls back to defaults.
* fix(sub): hide save/restart header on sub-balancers tab
Sub-balancer mutations are incremental (own CRUD API, no Save, no restart), so the page-wide 'every change needs to be saved / restart the panel' banner is misleading there. The in-tab alert already explains it correctly.
* feat(sub): add observatory config i18n keys
pages.settings.subBalancers.observatory.* (title, desc, probe field labels and help texts) added to all 13 locales.
* feat(sub): regenerate openapi for subJsonObservatory
openapigen picks up the new AllSetting field; openapi.json synced into docs.
* feat(sub): add observatory tab to sub-balancers
Mirrors the Xray Balancers page: two tabs (Balancers + Observatory).
Wires allSetting/updateSetting into the tab and adds tabBalancers /
tabObservatory labels to all locales. The page Save header is shown
again on this tab so the observatory config can be saved.
* refactor(sub): drop observatory tab from sub-formats
Now that the observatory config lives under sub-balancers, remove the
duplicate tab plus its state and defaults from sub-formats.
* fix(sub): add missing inboundsCount i18n key
The sub-balancers table rendered the raw key path in the Inbounds
column because pages.settings.subBalancers.inboundsCount was not
defined. Added it to all 13 locales.
* test(sub): pin disabled-inbound exclusion from balancer
The balancer builds its members from the subscriber's already-filtered
entry set, so an inbound disabled for that user can never surface as a
member. Adds tests for both shapes (one of several disabled, and the
only selected one disabled).
* fix(sub): make observatory toggle honest, default connectivity off, add balancer fallback
Three coupled defects on the balancer observatory surface, flagged in PR review:
- The Observatory Switch wrote '' which the Go side treats as "use built-in defaults", so leastPing/leastLoad still shipped a burstObservatory the admin could no longer see or edit. The observatory is mandatory for these strategies (Xray refuses to start leastPing/leastLoad without one — verified against Xray 26.7), so the switch is relabelled to "customise probe parameters vs built-in defaults" rather than on/off: '' keeps the defaults, a stored JSON overrides them. An info Alert explains this.
- Connectivity defaulted to http://www.google.com/generate_204 and an explicit {"connectivity":""} restored it, so the UI's "Leave empty to skip" was unreachable and the direct pre-check was dead on arrival on censored client networks. Default to "" and honour an explicit empty value.
- routing.balancers had no fallbackTag, so a leastPing/leastLoad balancer whose probes all fail selects nothing and dispatch fails. Emit fallbackTag pointing at the first member so a probe outage degrades instead of breaking.
Also skip balancer entries (kind!=0) in the member scan so a balancer can never match another balancer's row id. Tests cover each fix and fail without it.
* fix(sub-balancer): localize controller toasts and reject malformed ids
Route the new controller's user-facing messages through I18nWeb so non-English admins get localized toasts like every other controller, and switch parseID to strconv.Atoi rejecting ids < 1 so "12abc" and negative ids no longer coerce to a silent no-op delete that reports success.
* fix(sub-balancer): enforce remark length cap server-side
The model's validate:"max=256" tag was never enforced (parseSubBalancerForm binds an ad-hoc struct without validate.Struct), so a scripted API client could store an unbounded remark that is emitted verbatim as the remarks field of every affected subscriber's config. Reject len > 256 in validate() to match the frontend Zod cap.
* fix(sub-balancer): exclude mtproto from balancer member picker
SubJsonService.getConfig has no mtproto case, so an mtproto inbound's first outbound is "direct" and the buildBalancerConfig "tag != proxy" guard drops it — an admin could select it, save without error, and get a balancer that silently omits it (or no document at all). Drop it from the picker and fix the comment.
* docs(sub-balancers): add nav entry, fix tab pointer, note mirror scope
- Add "subscription-balancers" to the en reference/api meta.json pages array so the new MDX page is reachable from the sidebar (fa/ru/zh have no MDX — gen-openapi.ts emits into en only).
- Fix the endpoints.ts section description from "Settings -> Subscription" to "Settings -> Sub Balancers" (the feature's own tab) and regenerate the OpenAPI spec + MDX.
- Note in docs/lib/xray/subscription.ts that balancer documents are intentionally out of scope for that mirror.
* style(model): trim SubBalancer comment to 2-line cap
CLAUDE.md caps committed Go comment blocks at 2 lines; this one was 3.
* fix(sub-balancer): parse enabled explicitly and preserve it on partial update
parseSubBalancerForm treated any non-"false" value as true (so "bogus"
silently enabled) and always overwrote Enabled on update, so a PATCH that
omitted the toggle reset a disabled balancer back to enabled. Parse the
field with strconv.ParseBool and return *bool: absent means "no change"
on update and "true" on create; a malformed value is rejected as 400.
Update keeps the stored Enabled when the pointer is nil.
* fix(sub-balancer): clear deleted inbound from sub_balancers.InboundIds
DelInbound cascaded hosts but left the deleted inbound id in every
sub_balancers.InboundIds, so the balancer kept emitting a member no
subscriber could resolve — a dangling outbound tag with no proxy behind it.
Strip the id inside the existing delete transaction (same shape as the hosts
cascade, #5648); with the last member gone the balancer stops emitting.
* fix(sub-balancer): return not-found when deleting a missing balancer
Delete returned the gorm result error only, which is nil when no row matched,
so the controller reported success:true for an id that never existed — a stale
UI row looked like a clean delete. Check RowsAffected and return a not-found
error on 0 so the toast reflects reality.
* style(sub): shorten leastPing/leastLoad observatory comments
The observatory-emission guard comment and its test comment ran a few
lines long; trim them to a couple of lines each without dropping the
invariant that leastPing/leastLoad require a burst observatory.
* fix(sub): validate observatory setting instead of silently dropping it
SetObservatoryConfig applied whatever survived json.Unmarshal with no checks,
so a bad probe URL ("not-a-url"), non-duration interval/timeout, or even
unparseable JSON was either silently applied or silently ignored. Validate
each field: parse durations with time.ParseDuration, require http(s) URLs for
destination/connectivity, and log a warning naming the field and the bad value
on every fallback — including the unmarshal error, which was a quiet return.
Bad values now keep the built-in defaults instead of leaking into the emitted
burstObservatory.
* fix(sub): deduplicate burst-observatory defaults across Go and frontend
The burst-observatory ping defaults lived in three places that had drifted:
Go defaultSubBalancerObservatoryConfig (http probe, sampling 3), the Zod
PingConfigSchema, and DEFAULT_BURST_OBSERVATORY (both with a connectivity
pre-check URL). Align them to one set: https probe destination, sampling 2,
and empty connectivity (skip the direct pre-check). The settings tab now
parses the stored JSON through PingConfigSchema and seeds its default from
DEFAULT_BURST_OBSERVATORY instead of carrying its own literal.
* refactor(sub): extract proxy outbounds once before the balancer loop
buildBalancerConfig unmarshalled every inbound document and re-extracted its
first outbound on each balancer, so with B balancers and N inbound docs the
same document was parsed B*N times. Pull each doc's proxy outbound in a single
pre-pass over the entries and cache it per entry; buildBalancerConfig now
clones the cached map before retagging, so one parse serves every balancer.
Output is byte-for-byte unchanged.
* fix(sub): form balancer member tags from the inbound protocol, not tcp→vless
balancerTransport derived the bal-N tag suffix from the outbound's transport
network and hard-coded tcp→vless, so a vmess/tcp or trojan/tcp member was
mislabelled "vless" in every client config — the tag lied about the proxy
type. Use the outbound's real protocol as the suffix (bal-1-vmess, bal-1-vless,
bal-1-trojan, …) so the tag names the actual proxy; the selector prefix and
dedup suffix are unchanged. Update the existing tag assertions and add a vmess
case that fails under the old mapping.
* fix(sub-balancer): default strategy to random in the create form
The create-balancer form seeded strategy to 'leastLoad', but the service
validate() defaults an empty strategy to 'random' and the API docs say the
default is 'random' — so a freshly opened form showed leastLoad while saving
without touching the field silently stored random. Align the form default to
'random' so what the admin sees is what gets persisted.
* feat(api-docs): document the SubBalancer response schema
The five sub-balancer endpoints carried no responseSchema, so the API docs
page rendered them without a typed example. Add example: tags to every
SubBalancer field, allow the struct through openapigen, and point the list
(responseSchemaArray) and single-row endpoints at 'SubBalancer'. Regenerate
the Zod/JSON schemas and OpenAPI doc and mirror openapi.json into docs/.
* style(sub-balancer): drop whitespace-only separator lines, add final newline
subBalancer.ts and SubBalancerFormModal.tsx used single-space blank lines as
separators between statements and had no trailing newline. Replace them with
clean empty blank lines and end each file with a newline.
* fix(i18n): translate sub-balancer toasts and observatory note
The sub-balancer toast messages (list/create/update/delete/invalidId) and
the observatory note were left in English across 11 non-English locales
(ar, es, fa, id, ja, pt-BR, tr, uk, vi, zh-CN, zh-TW) while every other key
in the subBalancers block was already translated. Translate them to match the
meaning and terminology of the surrounding keys in each file; the JSON
structure and keys are unchanged.
* fix(sub-balancer): hide disabled inbounds from the member picker
The picker offered every protocol-eligible inbound regardless of its enable
flag, but getInboundsBySubId filters `AND inbounds.enable = true`. A disabled
member is therefore dropped from every subscriber's entries, and when it was
the balancer's only member the balancer document silently stops being emitted
— with nothing in the UI explaining why. TestSubJson_BalancerSkippedWhenAll
MembersDisabled already documents that backend behavior.
Filter the way the sibling client picker has since #5645: hide disabled
inbounds, but keep one that is already selected so editing an existing
balancer cannot silently drop a member.
Drop the `?? []` on the useWatch result so the new useMemo dependency stays
referentially stable.
* style(sub): trim the balancerMemberSuffix comment to the 2-line cap
Comment blocks in committed Go are capped at 2 lines; the name already carries
what the function picks, so keep only the why.
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
Co-authored-by: claude[bot] <41898282+claude[bot]@users.noreply.github.com>
Client CRUD latency scaled with the number of client-inbound edges rather
than with the size of the change. On a 5k-client / 8-inbound / ~56k-edge
PostgreSQL panel, creating one client took 60-120s (#6252).
Two independent causes, both confirmed by the reporter's pg_stat_statements
and reproduced locally at their topology.
SyncInbound deleted every client_inbounds row for an inbound and re-inserted
the whole set, so a one-client edit rewrote thousands of unrelated rows. The
dominant caller was not user CRUD: the node traffic poll re-syncs every node
inbound from its snapshot every 5s, so the panel churned the entire
membership table continuously in the background. SyncInbound now reads the
current links and writes only the difference - insert missing, update a
changed flow_override, delete departed. Callers are unchanged, so every
reconciliation path benefits, and the four hot client CRUD paths additionally
pass only the clients they touched via ApplyInboundClientDelta.
The insert needs clause.OnConflict: the unconditional delete it replaces also
serialized concurrent syncs of one inbound, and the node poll commits in its
own transaction outside the serialized writer, where a duplicate key would
abort the whole poll on PostgreSQL.
Identity and membership questions expanded every inbound's settings.clients
JSON - 5.75s per call under the reporter's load. They now read the indexed
clients and client_inbounds tables, which every read path already trusts,
over just the emails being checked. A LOWER(email) expression index keeps
the case-insensitive matching indexed; a struct tag cannot declare one.
Measured on PostgreSQL 17 at 8 inbounds x 6000 clients, rows written to
client_inbounds per operation, before -> after:
create across 8 inbounds 48008 ins / 48000 del -> 8 ins / 0 del
update the client 48008 ins / 48008 del -> 0 ins / 0 del
detach from 4 inbounds 24000 ins / 24004 del -> 0 ins / 4 del
delete the client 24000 ins / 24004 del -> 0 ins / 4 del
Two behavior changes worth naming. An email seen with two different subIds
across two inbounds' JSON used to be locked so that no add could claim it,
including the one with the correct subId; the clients row now adjudicates.
And on an install whose settings JSON holds an email with no matching link,
"is this email on another inbound" now answers no, so deleting it elsewhere
purges its traffic rows; compactOrphans and the startup heal already
converge such drift.
Every added test was verified against a hand-written mutation of this change,
so none of them pass regardless of the fix. One mutation survives on purpose:
swapping OnConflict DoUpdates for DoNothing is only observable when two
transactions race the same row, and a timing-dependent test would be flaky.
Per-node batching of remote pushes and the metadata-only inbounds list from
the same report are deliberately not in this change.
Closes#6252
* Add enable toggle for external client links
* Document external link enable API fields
* Extend external client link metadata
* Fix external subscription cache status updates
* fix(sub): address the review on per-client external link controls
Blocking: the expiry filter dropped legacy rows. expiry_time was added
without a default, so AutoMigrate makes it nullable and backfills NULL,
and `expiry_time = 0 OR expiry_time > ?` is false for NULL under
three-valued logic — every external link written before the upgrade
vanished from all subscriptions. Add `default:0` on expiry_time and
last_fetch_at, make the predicate NULL-tolerant, and backfill the NULLs
a pre-fix build could already have written.
Rework fetch-status recording. It ran inside the singleflight in-flight
window, so every goroutine parked on the shared fetch waited for a DB
write to commit on the public, unauthenticated subscription path — and
because it was keyed on the row id, waiters and cache hits recorded
nothing, leaving rows that lost the race stuck on "Not fetched yet"
forever. fetchSubscriptionLinks now reports whether it did the network
fetch and expandEntry records afterwards, off the serving path, keyed on
kind+value so every row sharing the URL is stamped by the one fetch.
Keying on value also closes the recycled-rowid hazard: saves delete and
re-insert rows, and SQLite reuses rowids, so an in-flight write could
land on an unrelated client's row. The write no longer discards its
error either.
Drop the inert id round-trip. The panel never sent it, and the byId
branch was guarded by the exact kind+value equality that byKindValue
already keys on, so it could not change an outcome. Matching on
kind+value alone is what actually preserves fetch status across saves.
Reject a negative expiryTime instead of storing a row that is silently
invisible in every subscription — elsewhere a negative expiryTime means
"a duration from first use", so an API caller reusing that convention
got no error and no links.
Drop the ~50 lines of .client-form-* / .client-inbounds-field CSS that
no component renders; it is leftover from the WireGuard PR this one was
split from.
i18n: reuse the already-translated pages.inbounds.leaveBlankToNeverExpire
instead of shipping an English duplicate under pages.clients, and
translate namePrefix, lastFetchAt, lastFetchError and neverFetched into
all 12 non-English locales.
Cover the persistence path that had no test: the fetch-status writer over
a real DB against a failing then a succeeding server, a cache hit writing
nothing, and the negative-expiry rejection.
---------
Co-authored-by: MHSanaei <ho3ein.sanaei@gmail.com>
* feat(clients): give each client its own traffic reset cycle
Traffic reset is configured on the inbound, so every client sharing an
inbound resets together. An operator running a monthly 1000GB plan and a
weekly 200GB plan side by side has to press Reset Traffic by hand.
Clients now carry the same trafficReset / trafficResetDay pair the
inbound already has, with the same vocabulary and the same monthly
due-day rule, and PeriodicTrafficResetJob makes a second pass over the
clients whose own cycle matches the period it is running for. A client
that leaves the field at never behaves exactly as before: only its
inbound's schedule can reset it.
The fields live on ClientRecord as well as in the inbound settings JSON,
so an ordinary edit does not write the cycle back as empty, and an
unknown period is rejected rather than coerced, since a coerced value
would read as configured while no job would ever select the client.
Cron expressions and a custom post-reset quota from the issue are left
out: both are separate decisions, and neither has an inbound-level
counterpart to stay consistent with.
* fix(clients): make the per-client reset cycle editable and safe to run
Review found three things wrong with the first cut, one of them mine and
worse than the bug it replaced.
The cycle could only be set at creation. ClientService.Update writes the
columns directly only for a client with no inbounds; the normal path goes
through SyncInbound and applyClientRecordMerge, which this change had not
extended, so an edit updated the settings JSON while the clients column
kept the old value and the job kept applying the old cycle. The earlier
test passed because it asserted the value survived an unrelated edit,
which it did precisely because nothing ever wrote it. Replaced with a
test that changes the cycle and switches it off again.
Avoiding the re-enable that ResetTrafficByEmail performs was wrong.
Depletion disables clients.enable and the settings JSON as well as
client_traffics.enable, so lifting only the quota gate left a depleted
client out of the generated config with zeroed counters, which no longer
match the depleted predicate: locked out permanently. The rule is now
about cause, not state — a client the quota switched off is restored, one
disabled below its quota was switched off by hand and is skipped.
The bulk path also bypassed node propagation and the MTProto sidecar
quota that ResetTrafficByEmail handles, so it silently did nothing on
node-backed inbounds. Dropped in favour of the integrated path, whose
needRestart is now collected and turned into a single SetToNeedRestart.
Also adds the AutoMigrate NULL backfill, guards the merge so a stale node
snapshot cannot erase a configured cycle, validates the bulk-create and
import paths, normalizes the day the way the inbound path does, marks the
fields omitempty so existing clients match the published contract, and
shares one TRAFFIC_RESETS tuple between the three forms.
* fix(clients): validate renew fields on the bulk and import paths too
BulkCreate and ImportClients insert client records without going through
Create, so the resetDay/resetMax checks added with the calendar renewal
(#6239) and the renew cap (#6238) never ran there. An API caller could
store resetDay 45 or a negative resetMax, values the renewal query then
mishandles silently. Mirror Create's validation on both batch paths, next
to the trafficReset check they already carry.
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
* feat(clients): renew on a calendar day instead of a rolling interval
Auto-renew advances the expiry by a fixed number of milliseconds, so a client
set to 30 days drifts against the calendar: renewing on 31 January lands on
2 March, and by the end of the year the billing day has wandered a fortnight
from where the operator's own plan resets.
Add a per-client renewal day. When set, the expiry steps whole calendar months
at midnight in the panel's time zone. A month too short for the chosen day
renews on its last day and the following month returns to the chosen one, so
the 31st does not decay into the 28th permanently.
Zero keeps the interval mode, so existing clients are untouched.
The interval branch now also refuses a zero step. It is unreachable while the
selection filter holds, but that loop runs on the single traffic writer, and a
zero interval there would hang every panel mutation behind it.
* fix(clients): persist the calendar renewal day on the client record
resetDay lived only in the inbound settings JSON and client_traffics, so
every path that rebuilds a client from the clients table wrote it back as
zero: an ordinary edit, an attach to a second inbound, a traffic reset on
a disabled client. Calendar mode turned itself off during normal use and
the operator only found out a month later.
Adds reset_day to ClientRecord and threads it through ToRecord, ToClient,
applyClientRecordMerge and the record update map, so the value survives
the round trip. The clients page filter and ClientSlim now recognise the
mode, nodeClientRenewed classifies a calendar renewal as a renewal, the
node snapshot merge carries reset_day, and the service layer rejects a
day outside 0-31 rather than clamping it silently.
Also renames the label keys to renewOnDay to keep them apart from the
existing renewDays, translates them and the new RESET_DAY subscription
placeholder in all 13 locales, adds the field to the bulk-add modal, and
drops the stray internal/web/dist/.gitkeep build stub.
* fix(clients): let the billing day be changed after creation
ClientService.Update writes the record columns directly only for a client
with no inbounds. The normal path goes through SyncInbound and
applyClientRecordMerge, which this change had not extended, so moving a
client from the 20th to the 5th updated the inbound settings JSON while
clients.reset_day kept the old value and the renewal kept using it.
The existing test did not catch it: it asserted the day survived an
unrelated edit, and it survived precisely because nothing on that path
ever wrote it. TestClientEditChangesTheBillingDay moves the day and then
switches calendar mode off again; removing the record write turns it red.
* chore: drop the accidentally committed dist build stub
internal/web/dist/.gitkeep is what make dist-stub creates locally. Committing
it changes fresh-clone behaviour for everyone: today a bare go build fails
loudly on //go:embed all:dist, which is the documented signal to run the stub
target; with the file present the build succeeds and the panel serves an empty
dist instead.
---------
Co-authored-by: n0ctal <n0ctal@users.noreply.github.com>
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>