A subJsonPath (or subPath/subClashPath/webBasePath) stored without its
leading/trailing slash — written before the slash rules existed, or
restored from an old backup — fails the frontend's whole-form validation,
so every save on the Settings page is rejected client-side. The backend's
CheckValid would normalize the value, but a save request never reaches it,
leaving the panel wedged until someone edits the database by hand.
Normalize the stored path rows at startup, mirroring CheckValid's slash
rules. The pass is idempotent and not seeder-gated, since a restored
backup can reintroduce bad values at any time.
Also add the missing pages.settings.validation.pathLeadingSlash key to
all 13 locales — the validation error used to render as its raw key.
Closes#5726
The inbound's spiderX now acts as a per-client seed: exports emit
sha256(seed|subKey) truncated to a 15-hex "/path", so a client's spx no
longer changes on every subscription fetch (#5718) while different
clients stop sharing one fingerprintable value. The form gains a
regenerate button that rotates every client's path at once.
The frontend link builders derive through the same function
(lib/xray/spider-x.ts, @noble/hashes) keyed on subId-then-email like
the Go subKey, so panel QR/copy links and subscription output agree —
cross-language vector tests lock both sides byte-for-byte. streamData
now tolerates malformed stored stream settings (unparseable JSON, null
tls/reality settings) instead of panicking the subscription request.
The WireGuard peer address was allocated server-side and shown read-only
in the client editor, so changing it required hand-editing the inbound's
raw settings JSON (#5715). The backend add/update paths already honored a
submitted allowedIPs; only the form withheld it.
Make the field editable (comma-separated, empty still auto-assigns) and
validate submissions server-side: entries must parse as an IP or CIDR,
bare addresses normalize to single-host prefixes, and an address already
used by another peer on the inbound is rejected.
Closes#5715
The Host VLESS Route field was stored and shown in the panel but never applied to any generated subscription (raw, JSON, Clash), so the UUID was emitted unmodified (#5655).
Xray reads the route from the UUID's 3rd group (bytes 6-7, net.PortFromBytes) and masks those bytes to zero before authenticating, so a value can be baked into the share/JSON/Clash UUIDs without breaking the user match. A shared applyVlessRoute helper encodes a single 0-65535 value as the 3rd group; empty/invalid/non-UUID input is left unchanged, so legacy data never yields a broken link and no DB migration is needed.
The field was wrongly validated as a multi-segment port spec (that form belongs to the separate server-side routing rule). It is now a single value 0-65535, with frontend validation, link-preview parity (genVlessLink/hostToExternalProxyEntry), hint + error translations across all 13 locales, and tests on every path.
Closes#5655
* feat(xray): reference-cleanup helpers for entity deletion
When an outbound or balancer is deleted on the Xray page, routing rules and
balancers that reference it must be repaired in the same edit, or the saved
config breaks the core: a dangling balancerTag stops Router.Init (whole core
down), a dangling outboundTag black-holes matched traffic at the dispatcher.
Add pure plan*/apply* helpers that compute and apply the cleanup. A rule is
kept when a destination (outboundTag or balancerTag) remains and dropped when
none does. Deleting an outbound cascades: emptying a balancer selector removes
that balancer too, then repairs its rules in one pass against the full removed
set; fallbackTag and dialerProxy references are cleared and observatories
re-synced.
* fix(balancers): clean routing rules referencing a deleted balancer
Deleting a balancer left routing rules pointing at its balancerTag. xray-core's
Router.Init then fails ("balancer <tag> not found"), the core won't restart and
every inbound drops — the saved config passes CheckXrayConfig (JSON shape only),
so it breaks only on the next restart.
The delete confirm now lists the affected rules (modified vs removed) next to
the existing observatory warning and applies planBalancerDeletion's cleanup: a
rule keeps its outboundTag when present, otherwise the whole rule is dropped.
Adds the shared DeletionImpactList and refCleanup strings across all 13 locales.
* fix(outbounds): clean rules, balancer selectors and dialerProxy on outbound delete
Deleting an outbound left routing rules pointing at its outboundTag (matched
traffic black-holed at the dispatcher), plus stale references in balancer
selectors / fallbackTag and other outbounds' dialerProxy.
The delete confirm now shows planOutboundDeletion's impact and applies the
cascade: rules keep a remaining balancerTag (else are dropped), the tag is
pulled from balancer selectors and fallbacks, dialerProxy references are
cleared, and a balancer whose selector is emptied is removed along with its
own now-targetless rules.
* refactor(xray): share one rule classifier across preview and apply
Code review flagged that the keep/drop predicate was transcribed twice — in
ruleImpacts (the delete-modal preview) and in applyCleanup (the mutation) — kept
in sync only by a parity test. Extract a single classifyRule() that both call,
so the preview can never disagree with what apply actually does.
Also harden balancersEmptiedBy to skip tagless balancers: an empty/missing tag
would otherwise enter the removed set as "" and silently drop every other
tagless balancer (only reachable via a hand-edited config, but a silent data
loss). And remove observersRemovedByDeletingBalancer, orphaned once BalancersTab
switched to planBalancerDeletion.
* fix(xray): null-guard reference cleanup against unvalidated configs
The PR review noted that classifyRule and applyCleanup dereferenced rule /
balancer entries directly, while the sibling propagateOutboundTagRename uses
optional chaining — because fetchXrayConfig falls back to the unvalidated parsed
object when Zod validation fails, a stray null in rules / balancers can survive
into the editor and would throw during the delete preview/apply.
Match that defensive style: classifyRule and balancersEmptiedBy read through
optional chaining, the balancer loop skips nullish entries, and the dialerProxy
walk guards the outbound. A delete on a hand-edited config with null entries now
degrades gracefully instead of throwing.
* feat(a11y): label list, toolbar & dashboard actions for screen readers
Phase 1 of #5486 (Android TalkBack support). Icon-only controls across
the management surfaces previously announced only their untranslated
icon name (e.g. "edit", "ellipsis") or nothing at all.
- Add aria-label to icon-only row-action and toolbar buttons across
inbounds, clients, groups, hosts, nodes and xray
(outbounds/routing/dns/balancers) lists, plus the dashboard cards.
- Make clickable bare icons and AntD Card actions keyboard-operable via
role/tabIndex + Enter/Space (new activateOnKey helper); convert mobile
dropdown triggers to buttons so they open from the keyboard.
- Fix the sidebar hamburger's mislabeled aria-label (was the dashboard
label) and translate previously-hardcoded outbound menu labels.
New i18n keys in all 13 locales: sort, menu.openMenu,
pages.xray.outbound.moveToTop.
* feat(a11y): label modal, QR and copy/download controls for screen readers
Phase 2 of #5486. Modal and overlay controls relied on tooltips (not a
reliable accessible name) or were bare clickable icons with no keyboard
or screen-reader support.
- Add aria-label to copy/QR/download/info icon buttons in the inbound and
client info modals, sub-links modal, QR panel, backup/log modals, and
to the bare search/select inputs of the attach/detach client modals.
- Make click-to-copy QR codes and the IP-log refresh/clear, geofile
reload and log refresh icons keyboard-operable (role/tabIndex +
Enter/Space) with translated labels.
- Label the 2FA code input; drop the QrPanel download-image string
fallback now that the key exists.
New i18n key in all 13 locales: downloadImage.
* feat(a11y): label form fields and shared form components for screen readers
Phase 3 of #5486. Form controls and shared form widgets were largely
unlabelled, and several remove controls were not keyboard-operable.
- SettingListItem now ties its title to the control via aria-labelledby,
giving accessible names to the ~90 settings-tab inputs at once.
- InputAddon gains button semantics (role/tabIndex/Enter+Space) and an
ariaLabel prop when used as an interactive remove control.
- Sparkline charts expose a role="img" summary of their latest values.
- Add aria-label to add/remove/regenerate icon buttons and bare
inputs/selects across inbound, client and xray (dns/routing/balancer/
outbound) forms; make clickable remove icons keyboard-operable; mark
decorative help/target icons aria-hidden; label the JSON editor,
date-time clear button, header-map remove, notification select-all and
remark token chips.
New i18n keys in all 13 locales: regenerate, jsonEditor,
pages.xray.balancer.{costMatch,costValue,costRegexp}.
* chore(a11y): add eslint-plugin-jsx-a11y harness and fix flagged interactions
Phase 4 of #5486. Adds eslint-plugin-jsx-a11y (recommended ruleset,
scoped to .tsx) so screen-reader/keyboard regressions fail lint.
- Make the mobile node-card header a proper keyboard disclosure
(role=button, aria-expanded, Enter/Space activation that ignores
clicks on the nested action buttons) and drop the now-redundant
stop-propagation click handlers the linter flagged on card-action
wrappers in the node, client and inbound mobile cards.
- Disable jsx-a11y/no-autofocus: the autofocus on the login field and
modal primary inputs is intentional focus management that helps
screen-reader and keyboard users land on the right control.
make lint passes with the a11y ruleset enforced.
* feat(a11y): cover remaining deferred spots (settings tabs, sockopt, API docs)
Completes the panel sweep for #5486 by labelling the spots previously
left out of phases 1-4:
- NotifyTimeField (Telegram notifications): the mode, interval, unit and
custom-cron inputs now carry aria-labels.
- The Sockopt toggle in transport options.
- Settings category tabs in icons-only (mobile) mode now expose the tab
name as the icon's aria-label instead of the raw icon name.
- The Swagger API-docs view is wrapped in a labelled region landmark.
New i18n keys in all 13 locales: pages.settings.notifyTime.{interval,unit}.
* feat(a11y): label shared xray form components and remark field
Code review surfaced frontend/src/lib/xray/forms/ — shared form components
used by the host and inbound JSON forms — which the initial audit missed.
- FinalMaskForm (TCP/UDP final-mask editor): label the icon-only add and
regenerate buttons and make all six remove icons keyboard-operable
(role/tabIndex/Enter+Space); adds useTranslation to its sub-components.
- CustomSockoptList: the remove icon is now keyboard-operable.
- SniffingFields: aria-label on the otherwise label-less destOverride select.
- RemarkTemplateField: aria-label on the remark-variable picker button.
New i18n key in all 13 locales: pages.inbounds.sniffingDestOverride.
* feat(a11y): label client info modal and WireGuard config block
After rebasing onto the WireGuard client-config feature, re-apply the
ClientInfoModal copy/QR/IP-log aria-labels (the modal was restructured
upstream, so the original labels did not carry over) and label the new
ConfigBlock component's copy/download/QR actions. ConfigBlock's action
wrapper keeps its stop-propagation handler (a non-interactive guard for
the Collapse header) under a scoped jsx-a11y exception.
* fix(frontend): let npm install jsx-a11y under ESLint 10
eslint-plugin-jsx-a11y@6.10.2 declares a peer range that stops at ESLint 9,
but the panel is on ESLint 10, so `npm ci` aborts with ERESOLVE even though
the plugin runs fine on ESLint 10 with flat config. Add an npm override so
jsx-a11y accepts the project's ESLint version. This keeps normal peer
resolution (recharts' react-is peer still auto-installs) — no global
legacy-peer-deps and no manual react-is pin needed.
* fix(a11y): size mobile row triggers and move node expand role to chevron
Address automated review on #5652:
- add size="small" to the inbound/client/node mobile-card "more" dropdown
triggers so they match the adjacent small Switch and the established
desktop RowActions pattern.
- move the node card-head disclosure semantics (role/tabIndex/aria-expanded/
keyboard) onto the chevron affordance so the expand control is no longer a
role="button" wrapping the Switch, info button and dropdown. Mouse
click-anywhere-to-expand is preserved on the header div.
The client info and QR modals rendered a WireGuard config whenever the
client still carried leftover WG key material (privateKey / publicKey /
allowedIPs / preSharedKey / keepAlive), regardless of whether a WireGuard
inbound was actually attached. After detaching the WG inbound the config
kept showing, built with an empty endpoint port and public key.
Gate wgConfigText on an attached WireGuard inbound (wgInbound) being
present, not just isWireguardClient(client), in both ClientInfoModal and
ClientQrModal.
Also rename the i18n key pages.clients.conf -> config and add the missing
pages.clients keys (wireguardConfig, config, bulkFlow, bulkFlowNoChange,
bulkFlowDisable) to all 12 non-English locales so each one matches en-US.
* feat(ldap): add InsecureSkipVerify field and tlsConfig helper
Extract the inline TLS config at both LDAPS dial sites (FetchVlessFlags,
AuthenticateUser) into a tlsConfig(cfg) helper, and add a new
Config.InsecureSkipVerify bool that flows through to
tls.Config.InsecureSkipVerify. This unblocks enterprise environments
(e.g. Microsoft AD CS with internal CAs) where the server certificate
chain cannot be imported into the system trust store.
Behavior is identical when InsecureSkipVerify is false (the default) -
pure refactor + plumbing. The helper is unit-testable without a live
server, which is why it is extracted.
Closes https://github.com/MHSanaei/3x-ui/issues/5538
* feat(settings): add LdapInsecureSkipVerify setting
Plumb the new LDAP skip-TLS-verify toggle through the settings stack:
- AllSetting struct field (json/form tag: ldapInsecureSkipVerify)
- defaultValueMap default ("false")
- GetLdapInsecureSkipVerify() getter
- ldap_sync_job wiring into ldaputil.Config (FetchVlessFlags path)
- panel/user.go wiring into ldaputil.Config (AuthenticateUser path;
the original issue's file list missed this)
Persistence is handled by UpdateAllSetting's reflect loop, matching
the existing pattern used by ldapUseTLS (no explicit setter).
Closes https://github.com/MHSanaei/3x-ui/issues/5538
* feat(ui): add Skip TLS verification switch in LDAP settings
Wire the new ldapInsecureSkipVerify setting into the hand-written
frontend model and Zod schema, and render it as a new Switch in
GeneralTab right under "Use TLS (LDAPS)". The switch is disabled
when TLS is off (the setting is meaningless without LDAPS) and shows
an insecure-warning description to make the security implication
visible to operators.
Also adds a Vitest round-trip test pinning schema acceptance and
model default-to-false behavior.
Closes https://github.com/MHSanaei/3x-ui/issues/5538
* chore(i18n): add Skip TLS verification strings to all locales
Add pages.settings.ldap.skipTlsVerify and skipTlsVerifyDesc to all 13
backend-served translation files, matching the existing repo
convention of keeping LDAP keys present in every locale (en-US, fa-IR,
ru-RU, zh-CN, zh-TW, pt-BR, ar-EG, uk-UA, id-ID, tr-TR, vi-VN, ja-JP,
es-ES). No translation-parity test exists in CI, but every other
LDAP key is replicated across all files, so this keeps the
invariant intact.
Closes https://github.com/MHSanaei/3x-ui/issues/5538
* chore(codegen): regenerate frontend artifacts
Regenerate frontend/src/generated/{zod,types,schemas,examples}.ts
and frontend/public/openapi.json via `npm run gen` to reflect the
new ldapInsecureSkipVerify field. The codegen CI job runs
`git diff --exit-code` on these files; failing to commit them would
break the build.
Closes https://github.com/MHSanaei/3x-ui/issues/5538
* feat(balancers): tabbed Observatory/Burst form replacing raw JSON
Replace the raw JSON editor for the Observatory / Burst Observatory sections
with a proper Ant Design form, and split the Balancers page into two sub-tabs:
"Balancer Settings" (the existing table) and "Observatory".
Observers stay fully auto-managed by balancer strategy through the existing
syncObservatories logic: users edit only the tunable probe fields, the
subjectSelector is shown read-only since it is derived from the balancers, and
deleting the last balancer that needs an observer now warns in the confirm
dialog that the observer will be removed too. Overlapping selectors keep an
observer alive while any balancer still references it.
Also add the previously missing pingConfig.httpMethod field (HEAD/GET) and
translations for the new strings across all 13 locales.
* refactor(balancers): tighten httpMethod typing and align connectivity default
Address automated review feedback on the Observatory form:
- Use the ObservatoryHttpMethodSchema enum for pingConfig.httpMethod instead of
a free-form z.string(), and drive the HTTP method Select from its options.
Removes the previously dead enum export and the duplicate local list, and
types the field as 'HEAD' | 'GET'.
- Align the schema's connectivity default with DEFAULT_BURST_OBSERVATORY (the
hicloud URL) so it matches what burst observers are actually created with.
No behavior change.
WireGuard inbounds now manage per-client peers using xray-core's native WireGuard users (AddUser/RemoveUser). Each client lives in settings.clients (canonical, like every other protocol) and is projected to peers[] only when emitting the xray config, at level 0 so the dispatcher's per-user traffic/online counters work with no extra plumbing.
Backend: internal/util/wireguard gains KeyToHex (base64 to hex for the gRPC path), PublicKeyFromPrivate and GenerateWireguardPSK; xray/api.go builds a wireguard account in AddUser with hex keys (RemoveUser already worked); client CRUD generates a keypair and allocates a unique tunnel address per client and never rotates keys on edit; an idempotent migration converts legacy settings.peers into managed clients; WireGuard is included in the raw subscription.
Frontend: WireGuard in the add-client modal with keys on the credential tab, client schema, per-client QR/link/.conf, inbound form reduced to server settings; i18n added across 13 locales.
Fix: guard the settings[clients] assertion in add/update so a legacy WireGuard inbound stored without a clients key no longer panics.
The group page shows traffic counting per group, but the only reset
available zeroed every member client's up/down counters (and their
quotas) via bulkResetTraffic. Group traffic is a derived sum of client
traffic, so zeroing the group display previously required mutating the
clients themselves.
Add a display-only baseline: ClientGroup gains reset_up/reset_down
columns (additive, handled by AutoMigrate). ResetGroupTraffic snapshots
the group's current up/down sum into the baseline, and ListGroups now
reports max(0, sum - baseline). Client counters are left untouched and
no Xray restart is triggered. A new POST /panel/api/clients/groups/
resetTraffic endpoint drives it, creating the client_groups row when the
group exists only as a derived label.
The groups page action now calls the new endpoint; confirm/success
strings updated across all 13 locales to reflect group-only semantics.
Replace the static reality-targets list with a server-side TLS 1.3 probe that checks TLS 1.3 + HTTP/2 + X25519 + a trusted certificate.
- Single-domain validate auto-fills target and serverNames from the cert SAN
- Discovery scans an IP/CIDR without SNI to find new targets from their certificates, deduped and ranked by feasibility then latency, private-IP guarded via netsafe
- New endpoints scanRealityTarget and scanRealityTargets with RealityScanResult, plus openapigen and api-docs entries
- Add scanner strings to all 13 locales
- Replace deprecated AntD Alert message prop with title across the panel
Add a Docs button next to the donate button in the sidebar and mobile drawer linking to https://docs.sanaei.dev/, with menu.docs translations across all 13 languages.
A checkbox in both the Xray Access Logs and panel Logs modals polls the
existing refresh every 5s while enabled, respecting the current row count,
level/filter, and Direct/Blocked/Proxy selections. The poller tears down on
close or untoggle. Adds a localized pages.index.autoUpdate key to all 13 locales.
Add bulkEnable/bulkDisable named endpoints backed by a shared internal impl, and consolidate the per-selection actions (attach, detach, add to group, ungroup, enable, disable, adjust, sub links) into the clients table's More dropdown so the toolbar only shows the selection count and delete. Translate the new enable/disable confirm dialogs and toasts across all 13 locales.
The node update confirm dialog now offers a 'Dev channel (latest commit)' choice. The dev flag threads master -> nodes/updatePanel -> UpdatePanels -> remote.UpdatePanel -> the node's updatePanel endpoint, which calls StartUpdateChannel(dev) to install the rolling dev-latest build. With no dev flag the node keeps following its own channel setting.
* feat(web): add vless encryption new modes
* feat(web): add translations for vless encryption modes
* feat(translation): bring "vlessAuthX25519" and "vlessAuthMlkem768" to general form
Adds an opt-in Dev channel so panels running CI per-commit builds can self-update to the latest commit, mirroring the stable online-update flow.
CI publishes/overwrites a single fixed-tag pre-release (dev-latest), force-moved to the newest main commit and marked --latest=false so releases/latest stays the stable tag. Builds stamp the short commit via -ldflags; the panel compares the running commit to the dev release commit to detect an update, and update.sh honors XUI_UPDATE_TAG to install from that tag. Linux/systemd only.
Add an Incy quick-import button (incy://add) to the Android and iOS app menus on the subscription page, and a new Incy settings tab with routing enable + rules. Incy routing is delivered by injecting an incy://routing/onadd line into the raw subscription body, avoiding a collision with Happ's Routing header. Includes backend settings, regenerated OpenAPI/zod schemas, and translations for all locales.
* feat(xhttp): support sessionID* rename + sessionIDTable/Length (xray v26.6.22)
xray-core v26.6.22 (PR #6258) renamed the XHTTP session config keys
sessionPlacement/sessionKey to sessionIDPlacement/sessionIDKey (no fallback
kept in core) and added sessionIDTable (predefined charset name or literal
ASCII) and sessionIDLength (range, e.g. 16-32, lower bound > 0).
Panel changes:
- Schema (xhttp.ts): rename the two keys, add sessionIDTable/sessionIDLength,
and a z.preprocess that lifts legacy keys off stored configs so an upgraded
panel never silently drops a saved session setting.
- Wire normalize + share-link build/parse: rename keys, emit the two new
fields, and accept legacy sessionPlacement/sessionKey from old share links.
- Inbound + outbound XHTTP forms: rename field paths, add a sessionIDTable
autocomplete (9 predefined tables + free ASCII) and a sessionIDLength range
input shown only when a table is set, with light client validation (ASCII
table, length min > 0; xray enforces the room-size minimum server-side).
- Subscription (service.go) and Clash (clash_service.go) builders: emit the
renamed + new keys, with a legacy fallback for not-yet-resaved inbounds.
- Locales: add sessionIDTable/sessionIDLength labels + hints in all 13 files.
Two sibling v26.6.22 XHTTP commits need no panel change and are covered by the
core bump alone: #6332 (XHTTP/3 closes QUIC/UDP) and #6320 (udpHop honors the
existing dialerProxy).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* test(xhttp): add Session ID Table to inbound form-blocks snapshot
The new sessionIDTable input renders by default in the inbound XHTTP form, so
its label joins the field-structure snapshot. sessionIDLength stays conditional
(only shown when a table is set), so it does not appear here.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* fix(xhttp): migrate legacy session keys in the running xray config
The Zod preprocess plus the subscription/Clash fallbacks only covered the
panel UI and share-link output. The config handed to the running xray-core
process is built from the raw stored streamSettings in GetXrayConfig, which
did not rewrite the renamed XHTTP session keys — so a pre-upgrade inbound (or
template outbound) stored with a non-default sessionPlacement was emitted
unchanged and dropped by xray-core v26.6.22, until the admin re-saved it.
Lift sessionPlacement/sessionKey onto sessionIDPlacement/sessionIDKey at
config-generation time, in the existing inbound stream-rewrite block (next to
the tls/reality/externalProxy handling) and across template outbounds. The
lift is idempotent and leaves unchanged configs byte-identical so the
hot-reload diff never sees a spurious change.
Also tighten validateSessionIDLength to reject an inverted range (e.g. 32-16)
in addition to the existing lower-bound > 0 check.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* fix(xray): avoid summed-capacity allocation in mergeSubscriptionOutbounds
CodeQL go/allocation-size-overflow flagged the pre-sized make() whose
capacity was a sum of three slice lengths. Grow the slice via append on
a nil slice instead; same result, no overflow-prone capacity expression.
* v3.4.0
* refactor(wireguard): drop removed `workers` field (xray v26.6.22)
xray-core v26.6.22 (PR #6287) removed the WireGuard `workers` (num_workers)
config field; the engine now relies on wireguard-go's internal worker
fallback and no longer reads it. Remove it from the panel so it stops
emitting a key xray ignores.
Removed from the inbound/outbound/outbound-form WireGuard schemas, both
WireGuard forms, the outbound form adapter (both directions) and defaults,
the two affected tests, and the `workers` label in all 13 locales. Existing
configs that still carry workers are simply dropped on parse — no migration
needed since the field had no runtime effect.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* Update version
---------
Co-authored-by: MHSanaei <ho3ein.sanaei@gmail.com>
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* fix(sockopt): honor trustedXForwardedFor on gRPC inbounds
xray-core v26.6.22 (commit 711aea4) switched the gRPC server from reading
the x-real-ip gRPC metadata to resolving the client IP from X-Forwarded-For
via sockopt.trustedXForwardedFor, matching ws/httpupgrade/xhttp.
The panel already exposed the trustedXForwardedFor field and wire output, but
the per-transport gate (TRUSTED_HEADER_NETWORKS) still omitted grpc. On a gRPC
inbound this raised a false "transport does not honor this header" warning and
mis-flagged the Cloudflare real-client-IP preset. Add grpc to the gate.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* docs(i18n): note gRPC in trustedXForwardedFor hint (all locales)
Follow-up to the gRPC gate fix: the trustedXForwardedForHint tooltip across
all 13 locales said the header is honored "only on WebSocket, HTTPUpgrade and
XHTTP". xray-core v26.6.22 added gRPC, so list it too.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Per-client IP limit only enforces where fail2ban is installed, so the panel now reports enforceability and disables the field otherwise:
- Add GET /panel/api/server/fail2banStatus (enabled/installed/usable/windows), cached 30s.
- ClientFormModal and ClientBulkAddModal disable the IP Limit input when not usable and show a hover tooltip; Windows gets a platform-specific message instead of the bash-menu hint.
- One-time migration ResetIpLimitNoFail2ban zeroes existing client limitIp (inbound settings JSON + clients table) on hosts without fail2ban, where the limit never applied.
- Drop the recurring '[LimitIP] Fail2Ban is not installed' warning.
- Add limitIpFail2banMissing/limitIpFail2banWindows/limitIpDisabled across all 13 locales.
- Move Routing out of the Xray Configs submenu; add Routing and Outbounds
as top-level sidebar items below Hosts
- Give them their own clean routes (/routing, /outbound) instead of
/xray#routing and /xray#outbound, registered in the React router and the
Go SPA shell so direct links and refresh work
- XrayPage derives the active section from the pathname for those routes
- Add menu.routing and menu.outbounds translation keys across all locales
* fix(node): never re-add a node's full counter on reset/restart (#5456, #5476, #5390)
When a node's per-client counter dips below the master's stored baseline
(node reboot, xray restart, or a reset propagated to the node), the delta
accounting clamped delta to the node's whole current counter and re-added it
to the master total — double-counting a client's lifetime usage in a single
sync and often pushing them over quota. Treat a backward-moving counter as a
reset: add 0 and rebaseline to the reported value, so only genuine post-reset
usage accrues.
Resets also now clear the per-node NodeClientTraffic baseline (ResetClient
TrafficByEmail, resetClientTrafficLocked, BulkResetTraffic, resetAllClient
TrafficsLocked), mirroring the delete paths. Without this the node's pre-reset
cumulative — including traffic it had counted but not yet synced — leaks back
onto the master after a reset, which is the 'reset reverts after a while'
report. The next sync then takes the clean delta=0 + rebaseline path regardless
of node state.
Updates TestNodeCounterReset (was _Clamped, now _NoReAdd) to assert rebaseline
instead of re-add, and adds TestCentralResetClearsNodeBaseline_NoLeak.
* fix(inbound): keep persisted node share strategy on edit (#5375)
Opening the edit modal silently reverted shareAddrStrategy from 'node' to
'listen'. The downgrade effect fires before the form settles: availableNodes
is an empty placeholder until /nodes/list resolves, and Form.useWatch('protocol')
is briefly empty on the first edit render — both transiently make the node
option look unavailable, so the effect clobbered the saved value.
Gate the downgrade on availableNodesFetched (threaded from useNodesQuery through
InboundsPage) and on the protocol watch being settled, so a persisted strategy
is only downgraded when the node option is genuinely unavailable. Adds a
rerender-based regression test covering the nodes-loading race.
* <3
* perf(traffic): skip cross-panel quota subquery when no globals exist (#5392, #5389)
disableInvalidClients ran a correlated EXISTS against client_global_traffics
on the full client_traffics table every 5s. On a panel no master pushes to,
that table is empty so the subquery can never match — yet it forced a full
scan that pegged Postgres at 100% CPU on large client counts. Probe the table
first and drop the EXISTS branch when it's empty (the common case), and add an
idx_client_global_email index so the subquery is an index lookup when globals
are present. Cross-panel enforcement is unchanged (TestGlobalUsage_DisablesClient).
This also relieves #5389 ('traffic writer queue full' / panel freeze): the
heavy query runs inside the serialized traffic write, so a slow DB backs the
shared writer queue up until request handlers block.
* fix(sub): don't advertise a leaked client IP for local wildcard inbounds (#5425)
For a local inbound with no node, no custom share address, and a wildcard/blank
listen, resolveInboundAddress fell straight through to the subscriber's request
host. Behind NAT/proxy/CDN that Host can be the requesting client's own IP, so
the subscription wrote the client's address into the inbound instead of the
server's — while the panel's own share link (which doesn't use the request host)
stayed correct.
Prefer the admin's configured public host (Sub/Web domain) over the raw request
host for this last-resort fallback. With no configured host the request host
still stands, so existing single-domain setups are unaffected.
Add three client-management actions to the Clients page More menu:
- Delete unattached clients: removes every client with no inbound
attachment, cascading its traffic rows, IP log, and external links
(POST /clients/delOrphans).
- Export clients: shows the {client, inboundIds} list in a read-only
CodeMirror viewer with copy/download (GET /clients/export returns the
array in the standard envelope).
- Import clients: pastes that JSON into an editable CodeMirror editor,
mirroring Import an Inbound (POST /clients/import takes a { data }
body). Attached clients go through the create-and-attach path; items
with no inboundIds are restored as bare records; existing emails are
never overwritten and are reported as skipped.
Document the new endpoints in api-docs and translate the new strings
into all supported languages.
TLS: add verifyPeerCertByName (vcn) to inbound settings + emit in both share-link generators (frontend + Go sub) and outbound parser; the allowInsecure replacement xray removed after 2026-06-01. Add server-side curvePreferences, masterKeyLog, echSockopt (passthrough + form) at tlsSettings top-level so they survive the panel-only settings strip.
REALITY: add limitFallbackUpload/Download (afterBytes/bytesPerSec/burstBytesPerSec) with per-field tooltips, plus masterKeyLog. Verified field names/semantics against pinned xray v1.260327.1 (bytesPerSec=0 disables).
Hosts: fix verify_peer_cert_by_name column bool->string (xray expects comma-separated names) with an idempotent, history-gate-free migration (SQLite typeof blank; Postgres ALTER once); emit vcn for hosts/external proxies.
Server: add getCertHash (local cert DER SHA-256) and getRemoteCertHash (xray tls ping) endpoints + api-docs; wire pinned-cert field buttons. Drop the meaningless random-hash button.
Xray UI: metrics endpoint (listen/tag) config in Basics; import/export for routing rules and outbounds.
Fallbacks card: compact empty state, header-aligned actions, responsive labeled grid rows.
i18n: add all new keys to every locale; drop unused generateRandomPin.
* feat(settings): add option to hide server settings in subscription
* chore: regenerate codegen and add translations for subHideSettings
- Update frontend/src/generated/{types,schemas,zod,examples}.ts to include
subHideSettings (bool) in AllSetting and AllSettingView
- Add subHideSettings / subHideSettingsDesc translation keys to all 11
remaining locales: ar-EG, fa-IR, es-ES, id-ID, ja-JP, pt-BR, uk-UA,
tr-TR, zh-TW, zh-CN, vi-VN
Co-authored-by: IgorKha <IgorKha@users.noreply.github.com>
Co-authored-by: Sanaei <MHSanaei@users.noreply.github.com>
* fix(sub): add subHideSettings default to settings map
Every other sub* setting has an entry in defaultValueMap; subHideSettings was missing, so GetSubHideSettings hit the 'key not in defaultValueMap' error path on a fresh install (only masked by the false fallback in sub.go). Add the default for consistency.
Issue 1: the host endpoint remark no longer substitutes the inbound remark
as the config name. {{INBOUND}} always resolves to the inbound's own remark
and {{HOST}} to the host remark, so both can be shown side by side instead
of the host name appearing twice. configName() drops hostRemark entirely;
token help text updated in all locales.
Issue 2: client_traffics.email is globally unique, so a client shared across
several inbounds of one subscription has a single traffic row owned by one
inbound. statsForClient only searched the current inbound's preloaded
ClientStats, missing on every other inbound's link and falling back to
Up=Down=0 -- so {{TRAFFIC_LEFT}} printed the full quota. Build a per-request
email->stats map from all the subscription's inbounds (no extra queries) and
fall back to it.
* test(sub): characterize current link output (externalProxy + single-link baselines)
Phase 0 of the Hosts feature. Locks current subscription-link output for the
externalProxy paths (vless/vmess/trojan/ss exact, reality/hysteria by Contains)
so the upcoming ShareEndpoint refactor can be proven behavior-preserving. These
must stay green and unedited through every later phase.
* refactor(sub): unify external-proxy link building behind ShareEndpoint (TDD, snapshot-locked)
Phase 1 of the Hosts feature. Collapse the duplicated externalProxy link
builders (param-form for vless/trojan/ss, object-form for vmess) onto a single
ShareEndpoint abstraction so Phase 4 can add Host-driven links with ~zero new
branching.
Design: an externalProxy-derived endpoint carries the original entry map and
applies it through the UNCHANGED applyExternalProxyTLS{Params,Obj} helpers, so
output is provably byte-identical. buildExternalProxyURLLinks /
buildVmessExternalProxyLinks become thin adapters; the genVless/Trojan/SS/Vmess
call sites are untouched. genHysteriaLink is deliberately left on its own path
(hex pinSHA256, not pcs). The no-externalProxy default tails are unchanged.
TDD: N1-N4 (externalProxyToEndpoint, inboundDefaultEndpoint, buildEndpointLinks,
buildEndpointVmessLinks) written failing-first against stubs, then implemented.
Mutation sanity (performed + reverted): dropping the ep-carry in
externalProxyToEndpoint makes the Phase-0 C1/C2 characterization snapshots go
red (TLS overrides vanish), proving the snapshots guard the emitted output.
Gate: go test ./internal/sub/... and go test ./... green with ZERO edits to the
Phase-0 snapshots; go build ./... green on linux and windows; go vet clean.
* feat(model): Host entity + automigrate + openapi codegen (TDD)
Phase 2 of the Hosts feature. Adds the Host GORM model: an override endpoint
attached to an inbound (address/port + TLS/transport/clash overrides + sub
scoping), superseding the legacy externalProxy array functionally while leaving
it intact.
- model.Host with snake_case column tags, json serializer for slices, text for
free-JSON (mux/sockopt/xhttp), validate tags (remark 1-40, port 0-65535,
security + mihomoIpVersion enums); TableName "hosts". NodeGuids column is added
now but unused (host->node scoping deferred to v2).
- Registered in BOTH initModels() (db.go) and migrationModels() (migrate_data.go);
the latter is required for cross-DB migration and is easy to miss. PG sequence
resync iterates the initModels slice, so it is covered automatically.
- pruneOrphanedHosts() deletes hosts whose inbound_id has no inbound, called
alongside pruneOrphanedClientInbounds().
- openapigen manifest: Host added to StructAllow with MuxParams/SockoptParams/
XhttpExtraParams -> KindAny; regenerated frontend/src/generated/* + openapi.json.
TDD: TestHostTableName, TestHostValidation, TestHostAutoMigrateCreatesColumns
(+ _Postgres), TestPruneOrphanedHosts written failing-first against a wrong-name,
untagged, unregistered stub, then implemented.
Gate: go test ./... green on SQLite AND a real Postgres DSN (local container);
go build/vet/gofmt clean; npm run gen succeeds with the new Host type/schema/
example/zod; npm run typecheck + npm run test (542) green.
* feat(api): Host CRUD service + controller + routes (TDD)
Phase 3 of the Hosts feature.
- service/host.go (HostService, empty struct + database.GetDB() like
ClientService): GetHosts, GetHostsByInbound, GetHost, AddHost (verifies the
inbound exists — no hard FK), UpdateHost (inbound + sort order immutable here),
DeleteHost, SetHostEnable, SetHostsEnable, DeleteHosts, ReorderHosts (single
driver-safe transaction), GetAllTags.
- controller/host.go mirrors NodeController: routes under /panel/api/hosts
(list/get/byInbound/tags + add/update/del/setEnable/reorder + bulk/setEnable,
bulk/del), binds via middleware.BindAndValidate so the model validate tags are
enforced, {success,msg,obj} envelopes.
- Wired the hosts group into api.go after nodes (inherits checkAPIAuth + CSRF).
- DelInbound now cascades: deleting an inbound deletes its hosts.
- Documented all 11 routes in api-docs endpoints.ts (referencing the generated
Host schema) and regenerated openapi.json; extended TestAPIRoutesDocumented's
controller->basePath switch for host.go. Backend en toast keys added.
TDD: service tests (Add/GetByInbound, RejectsUnknownInbound, Reorder, Set/Bulk
enable, DeleteHosts, DeleteInboundCascadesHosts, GetAllTags) written failing-
first against a nil-returning stub; controller test (AddListGetDelete envelope
round-trip + AuthInherited 401) added.
Gate: go test ./internal/web/... + go test ./... green; npm run gen + typecheck
+ lint + test (542) + build green.
* feat(sub): render subscription links from hosts; legacy fallback when none (TDD, mutation-checked)
Phase 4 of the Hosts feature. Inserts host resolution between inbound and link
across all three subscription formats.
Mechanism: hostEndpoints(inbound, format) loads the inbound's enabled hosts
(filtered by ExcludeFromSubTypes, ordered by sort_order then id) and projects
each onto the externalProxy entry shape the raw/json/clash renderers already
consume. So a host fans out one link/proxy reusing the exact existing rendering
(address/port/security/sni/fp/alpn/pins/ech) with zero new TLS code. Host header
and path overrides are applied additively in the raw builders (no-op for legacy
externalProxy, which never carries those keys — characterization snapshots stay
green). Clash ip-version (MihomoIpVersion) is set last on the proxy.
Integration points:
- getSubs (raw): per inbound, hostEndpoints AFTER projectThroughFallbackMaster;
len>0 -> linkFromHosts (renders only the hosts), else legacy GetLink.
- GetJson/GetClash: inject the host endpoints into the inbound's externalProxy
before the existing getConfig/getProxies loop.
- Precedence: hosts win over any legacy externalProxy (injection replaces it).
Backward compat: a zero-host inbound takes the legacy path -> byte-identical
output (all Phase-0 characterization snapshots unchanged).
TDD: 9 cycles (zero-hosts identical, N-links-ordered with host/path override,
disabled skipped, host-vs-externalProxy precedence, no-dedup, sort composes with
SubSortIndex, host-over-fallback, resolve-via-client-inbounds, ExcludeFromSubTypes
per format) written failing-first against unwired helpers, then wired green.
Mutation sanity (performed + reverted, documented here):
- zero-hosts fallback: flipping the len(hostEps)>0 guard to >=0 makes
TestSub_ZeroHosts_IdenticalOutput go red (host path yields "" for no hosts).
- no-dedup: adding a remark-dedup in hostEndpoints makes TestSub_NHosts_NoDedup
go red (two distinct hosts collapse to one link).
Gate: go test ./internal/sub/... + go test ./... green with ZERO edits to the
Phase-0 snapshots; go build green on linux and windows; go vet + gofmt clean.
* feat(migration): seed hosts from inbound externalProxy (TDD, idempotent, dual-driver)
Phase 5 of the Hosts feature. One-time migration so existing installs surface
their legacy externalProxy entries as first-class Host rows.
- seedHostsFromExternalProxy() is self-gated on a HistoryOfSeeders
"HostsFromExternalProxy" row (run-once) and wired into runSeeders. For each
inbound it parses StreamSettings, reads externalProxy[], and creates one Host
per entry: forceTls->Security (unknown->same), dest->Address, port->Port,
remark->Remark (generated when blank, capped at 40), sni/fingerprint/alpn/
pinnedPeerCertSha256/echConfigList copied; SortOrder=index; InboundId set.
- Additive: externalProxy is left intact in StreamSettings (rollback-safe; the
sub layer prefers hosts when present, §Phase 4).
- Postgres: GORM db.Create advances hosts_id_seq via the sequence, so no extra
resync is needed beyond the existing startup resync.
TDD: field-mapping, idempotency (second run no-op), no-externalProxy->no-hosts,
externalProxy-kept-intact written failing-first against a stub; plus a
Postgres counterpart that skips without XUI_DB_DSN.
Gate: go test ./internal/web/service/... ./internal/database/... green on SQLite;
the *_Postgres tests green against a real Postgres container; go build green on
linux and windows; go vet + gofmt clean. (Running the whole database package
under XUI_DB_TYPE=postgres is not supported — the SQLite-path tests share the one
DSN — so only the t.Skip-gated *_Postgres tests run with the env set.)
* feat(ui): Hosts page + schema + query hooks + link preview helper (TDD on schema/helpers)
Phase 6 of the Hosts feature — the admin UI.
- schemas/api/host.ts: HostFormSchema (validation: remark 1-40, tags ^[A-Z0-9_:]+$
≤10×≤36, port 0-65535, security/mihomoIpVersion enums, alpn/fingerprint reused
from the shared primitives) + a loose HostRecordSchema/HostListSchema for reads.
- lib/hosts/host-link.ts: hostToExternalProxyEntry — the frontend mirror of the
backend hostToExternalProxyMap (security->forceTls, sni override rules, port
inherit), for share-link previews.
- api/queries/useHostsQuery.ts + useHostMutations.ts (mirror the node hooks):
list/get + add/update/del/setEnable/reorder/bulk; queryKeys.hosts.* added;
mutations invalidate keys.hosts.root().
- pages/hosts/{HostsPage,HostList,HostFormModal}.tsx (+CSS) mirroring pages/nodes:
list with remark · address:port · inbound · security · tags · enable Switch ·
per-inbound move up/down (reorder) · bulk enable/disable/delete; form grouped
into Basic / Advanced / Clash / Subscription-scope sections.
- Route '/hosts' + sidebar item (Global icon); menu.hosts + pages.hosts.* added to
the en-US bundle (other locales fall back to English until translated).
TDD: HostFormSchema (10 cases) and hostToExternalProxyEntry (6 cases) written
failing-first, then implemented. UI verified by lint/typecheck/test/build.
Deferred (documented enhancement): the live in-form share-link preview (needs
inbound+client context) and a per-host host/path override in JSON/Clash output
(raw already overrides; JSON/Clash inherit the inbound's host/path).
Gate: cd frontend && npm run lint && npm run typecheck && npm run test (557) &&
npm run build all green; go build ./... + go test ./... still green.
* refactor(ui): remove the External Proxy form from the inbound stream settings
Hosts supersede the legacy externalProxy: the subscription renders from hosts
(hosts win when both exist) and the migration converts existing externalProxy
entries to hosts. externalProxy's only real consumers were the subscription
(now covered) and this form's preview — the backend per-client copy-link never
used it — so removing the editor has no functional regression.
- Drop ExternalProxyForm + toggleExternalProxy from InboundFormModal and delete
the orphaned form component + its export; remove its block test + snapshot.
- KEEP the externalProxy schema field and backend parsing/link-generation: an
existing inbound's externalProxy still round-trips through the form (not
silently destroyed on edit) and still renders if a host was removed.
Gate: cd frontend && npm run typecheck + lint + test (556) + build green.
* fix(ui): use Alert `title` instead of deprecated `message` (antd 6)
Ant Design 6 deprecated <Alert message=> in favor of <Alert title=>; the panel
was mid-migration (21 Alerts already on title). Renamed the 7 remaining stragglers
across 5 files (SubLinksModal, InboundFormModal, sockopt, EmailTab, TelegramTab),
silencing the runtime deprecation warning. description= is unchanged.
Pre-existing warning, surfaced while testing Hosts — not introduced by it.
Gate: npm run typecheck + lint + test (556) + build green.
* style(ui): align Hosts page with Clients/Inbounds cards + reorder columns
- page-shell.css never listed .hosts-page, so the Hosts page got no content
padding / transparent-layout / summary-card spacing. Add a .hosts-page shell
block (background, dark/ultra vars, content-area + summary-card padding). This
is the actual "card spacing" bug.
- HostList: match the Clients/Inbounds list card — hoverable + the toolbar moved
into the card title as a .card-toolbar (Add when nothing selected; selected
count + bulk enable/disable/delete on selection). Re-declare .card-toolbar in
HostList.css since the shared rule lives in a lazily-loaded page stylesheet.
- Reorder table columns as requested: Actions, Enable, then Remark, Endpoint,
Inbound, Security, Tags. Added scroll x for narrow screens.
- HostsPage: add a summary card (Total / Enabled / Disabled) like the other
pages. New i18n keys: pages.hosts.selectedCount + pages.hosts.summary.*.
Gate: npm run typecheck + lint + test (556) + build green.
* style(ui): use Tabs instead of Collapse in the Add/Edit Host form
The Basic / Advanced / Clash / Subscription-scope sections are now tabs. Each
pane sets forceRender so all fields stay mounted — required because the form
uses preserve=false, so an unmounted tab's values would otherwise be dropped on
submit (and a required field on a hidden tab still blocks submit).
Gate: npm run typecheck + lint + test (556) + build green.
* style(ui): split Host form into Security + Advanced tabs; drop unused JSON fields
- Remove the Mux/Sockopt/XHTTP raw-JSON fields from the Host form: they were not
wired into link generation and the inbound's structured editors are inbound-
specific (not reusable). The DB columns + read schema + generated type stay, so
they can get proper editors later. (HostFormSchema drops them; HostRecordSchema
keeps them.)
- Reorganize tabs to Basic / Security / Advanced / Clash / Subscription scope:
Security holds the TLS/cert fields (security, sni, sni-overrides, alpn,
fingerprint, pins, verify-by-name, ech); Advanced now holds the transport
overrides (host header, path).
- i18n: add pages.hosts.sections.security; drop the 3 unused field labels.
Gate: npm run typecheck + lint + test (556) + build green.
* style(ui): restore Mux/Sockopt/XHTTP fields in the Host Advanced tab
Put the three free-JSON override fields back, in the Advanced tab next to host
header / path (as JSON inputs — the inbound's structured editors aren't reusable
here). Re-added to HostFormSchema + defaults + the i18n labels.
Gate: npm run typecheck + lint + test (556) + build green.
* feat(hosts): add allowInsecure (rendered) + serverDescription/mihomoX25519/vlessRouteId fields
Closes most of the Remnawave-host gap analysis.
- model.Host: + allowInsecure, serverDescription (≤64), vlessRouteId (0-65535),
mihomoX25519. Auto-migrated (SQLite + Postgres verified); openapi regenerated.
- allowInsecure is fully RENDERED into subscription output (TDD):
- raw link: allowInsecure=1 (TLS/Reality, skipped for none) via the endpoint
builder;
- JSON/Clash: applyExternalProxyTLSToStream writes tlsSettings.settings.
allowInsecure, and clash applySecurity now emits skip-cert-verify for the tls
case (it previously only did so for Hysteria — a pre-existing gap, so inbound
allowInsecure now renders for vless/trojan/ss clash too).
- Frontend: the four fields added to the Host form (allowInsecure → Security,
serverDescription → Basic, vlessRouteId → Advanced, mihomoX25519 → Clash);
serverDescription shown under the remark in the list. Schema + i18n updated.
serverDescription / vlessRouteId / mihomoX25519 are stored + editable; their
deeper rendering (and per-host mux/sockopt/xhttp into JSON/Clash, plus a per-host
xray JSON template) are tracked as follow-ups.
Gate: go test ./... green (SQLite + Postgres for the host schema/migration);
go build linux+windows; go vet + gofmt clean; npm run gen + typecheck + lint +
test (556) + build green; generated files in sync.
* feat(sub): render host sockopt + xhttp-extra params into JSON/Clash output (TDD)
A host's sockoptParams and xhttpExtraParams (free-JSON) now take effect:
applyHostStreamOverrides injects sockopt into the per-host stream (re-added since
the base stream strips it) and merges xhttpExtraParams into xhttpSettings, called
in both getConfig (JSON) and getProxies (Clash) right after the per-host TLS
apply. No-op for legacy externalProxy entries (keys absent) — characterization
snapshots unchanged.
mux rendering is outbound-level (overrides outbound.Mux) and needs a genVless/
genVnext/genServer signature change — deferred, along with the per-host xray
JSON template.
Gate: go test ./internal/sub/... + go test ./... green (snapshots unchanged);
go build + vet + gofmt clean.
* feat(sub): render host muxParams as a per-host JSON outbound mux override (TDD)
genVnext/genVless/genServer take a muxOverride: a host's muxParams (when valid
JSON) overrides the global mux on its JSON outbound; empty falls back to the
panel mux (behavior unchanged for non-host configs). Completes the host
mux/sockopt/xhttp trio. Test call sites updated for the new signature.
Gate: go test ./internal/sub/... + go test ./... green (snapshots unchanged);
go build + gofmt clean.
* style(ui): show Host security fields conditionally per security (like externalProxy)
* feat(sub): apply host SNI + fingerprint override for reality (TDD)
A reality host now overrides SNI and fingerprint while inheriting publicKey/
shortId from the inbound (reality keys can't be host-supplied). Previously the
reality link kept the inbound's serverName because the TLS appliers are gated to
security=="tls".
- raw: applyEndpointRealityParams sets sni/fp on the params for reality;
- JSON/Clash: applyHostStreamOverrides sets realitySettings.serverName +
serverNames from the host SNI.
Gated to host endpoints via an isHost marker on the synthesized ep, so the legacy
externalProxy path stays byte-identical (characterization snapshots unchanged).
The marker is internal and never emitted.
Gate: go test ./internal/sub/... + go test ./... green; go build + vet + gofmt clean.
* fix(ui): start the Host inbound select unselected instead of showing 0
A new host left inboundId defaulting to 0, so the Select rendered "0". inboundId
is now optional in the form (undefined until chosen), so it shows its
placeholder ("Select an inbound"); the required rule still enforces a choice on
save. Port keeps 0 (means "inherit the inbound's port").
Gate: npm run typecheck + lint + build green.
* fix(ui): drop redundant :port suffix from the Host inbound select label
The inbound tag (e.g. in-59303-tcp) already carries the port, so the appended
":59303" was duplicated. Show just the remark/tag.
Gate: npm run typecheck + lint + build green.
* style(ui): apply the shared card hover shadows to the Hosts page
page-cards.css scoped its card styling + hover shadows to each page class but
not .hosts-page, so Hosts fell back to antd's default hoverable (a larger/blurry
shadow + pointer cursor). Add a .hosts-page block matching the other pages.
Gate: npm run build green.
* feat(hosts): move Tags to Basic tab, add Nodes field, accept VLESS route ranges
- Move the Tags field into the Host form's Basic tab and add a Nodes
multi-select (visual-only assignment, backed by the existing node_guids
column) so the Basic tab matches the reference layout.
- Replace the single-port vlessRouteId integer with a free-form vlessRoute
string that accepts comma-separated ports/ranges (e.g. 53,443,1000-2000);
format-validated on the frontend, stored verbatim on the backend.
- Regenerated frontend types/openapi from the changed model.
* feat(hosts): structured editors for Mux/Sockopt/XHTTP + new Final Mask
Replace the raw JSON textareas in the Host form's Advanced tab with the same
structured editors used elsewhere, under a nested tabbed layout (General / Mux /
Sockopt / XHTTP / Final Mask), mirroring the Sub-JSON settings tab:
- Mux: the Sub-JSON mux editor (enable + concurrency/xudpConcurrency/xudp443).
- Sockopt + XHTTP: reuse the outbound SockoptForm / XhttpForm, wrapped in an
isolated form that serializes the edited subtree back to the host's JSON
string (pruned so the override stays sparse).
- Final Mask: new host field (model + column + JSON-render wiring that merges
the masks into the host's JSON-subscription stream), edited via the shared
FinalMaskForm like the Sub-JSON Final Mask editor.
Each editor stays a controlled value/onChange component bound to its existing
host JSON string field; backend rendering of mux/sockopt/xhttp is unchanged.
* feat(hosts): drop XHTTP + Xray-JSON-template overrides; fix mobile form layout
Remove the host's XHTTP extra-params and Xray-JSON-template overrides entirely
(model fields + columns, JSON-subscription render paths incl. hostTemplateOutbound,
schema, form tab/field, i18n, openapi codegen, and their tests) — they did not
fit the host model. Mux, Sockopt and Final Mask stay as structured editors.
Mobile fixes for the Edit Host modal:
- responsive width (95vw on mobile, was a fixed 760px that overflowed the
viewport and clipped the tabs/labels) + a scrollable body so the footer stays
on screen;
- Mux fields use responsive Row/Col (stack on mobile) instead of a fixed-width
label grid.
* fix(hosts): hide the spurious horizontal scrollbar in the Edit Host modal
Setting overflowY:auto on the modal body forced overflow-x to auto too (CSS
rule), so antd Row's negative gutter margins triggered a horizontal scrollbar.
Pin overflowX:hidden.
* feat(hosts): inbound-style responsive field layout + icon empty state
- Host form (main form + Mux/Sockopt/Final Mask editors) now use the inbound
form's label layout: label beside the input on desktop (labelCol sm span 8 /
wrapperCol sm span 14, right-aligned), stacked label-above-input on mobile.
Rewrote HostMuxForm onto an internal antd Form so it follows the same layout
instead of a manual grid.
- Empty hosts table now shows the host icon + the shared 'Nothing here yet'
(noData) text, matching Nodes/Inbounds/Clients, replacing the bespoke
'No hosts yet…' string.
* fix(hosts): avoid nested <form> in the Edit Host modal
The Mux/Sockopt/Final Mask editors each render their own antd Form inside the
host's main Form, producing an invalid nested <form> DOM node (hydration
warning). Render those inner forms with component={false} so they keep the form
instance/context but emit no <form> element.
* fix(hosts): make the Mux enable toggle work
The Switch's checked state came from Form.useWatch('mux'), but the mux object
field had no registered Form.Item while disabled, so setFieldValue never
notified the watcher and the toggle stayed off. Bind the Switch to a real
name='enabled' field (antd drives its checked state directly) and keep the
sub-fields registered via hidden={!enabled}, serialized to the flat mux JSON.
* refactor(hosts): reuse the outbound MuxForm instead of a bespoke Mux editor
The Mux fields duplicated the outbound MuxForm. Reuse it through the same
wrapper as Sockopt: generalize OutboundSubtreeJsonForm with defaultSubtree
(pre-fill on enable) and a serialize hook, and have HostMuxForm render MuxForm
at the ['mux'] path. The host keeps its inherit-when-off semantics by storing ''
unless mux.enabled. Also drops the now-unused enableSwitch path from the
wrapper (only the removed XHTTP editor used it).
* style(hosts): use default-width Port input like the inbound form
The host Port used width:100% (full width); the inbound's numeric inputs use
antd's default width. Drop the override so Port matches. The Mux number inputs
already use the default width via the reused MuxForm.
* refactor(sockopt): readable customSockopt editor as a shared component
The customSockopt rows were a single cramped Space.Compact line and duplicated
verbatim in the inbound and outbound sockopt forms. Extract a shared
CustomSockoptList that renders each entry as a titled group of labeled fields
(System / Level / Opt / Type / Value), matching the rest of the form, and use it
in both (and thus the host Sockopt editor).
* fix(finalmask): drop the empty Custom Tables tag on a new sudoku mask
The sudoku TCP-mask default seeded customTables: [''] (one empty string), which
rendered as a blank removable tag. Seed [] instead.
* fix(sockopt): make the outbound (and host) Sockopt client-only
Per the XTLS sockopt docs, tproxy / acceptProxyProtocol / V6Only /
trustedXForwardedFor only apply to an inbound (listening socket); they are
meaningless on an outbound/dialer. Drop them from the outbound SockoptForm
(which the host reuses). The Sockopt default object still seeds those keys, so
the host also strips them on serialize, keeping its override honest to the
server/client split. The inbound SockoptForm is left unchanged.
* fix(sockopt): make the inbound Sockopt server-only
Complete the server/client split: drop the outbound/dialer-only fields from the
inbound SockoptForm — dialerProxy, domainStrategy, interface, addressPortStrategy,
happyEyeballs, tcpMptcp (client-only since Go 1.24 auto-enables MPTCP on listen).
mark stays (xray applies SO_MARK on inbound sockets too). Update the form-blocks
snapshot to the server-side field set (intentional spec change).
* feat(hosts): populate Sockopt dialerProxy with the panel's outbound tags
The host Sockopt editor reused the outbound SockoptForm with outboundTags=[],
so the dialerProxy dropdown was empty. Feed it the panel's outbound tags via
the existing useOutboundTags hook (shares the cached xray-config query;
blackhole excluded), so a host can chain through a subscription outbound by tag.
* fix(hosts): empty-state styling on direct load + exclude balancers from dialerProxy
- .card-empty was only defined in lazily-loaded Clients/Inbounds/Nodes
stylesheets, so a direct /hosts refresh rendered the empty table state
unstyled (faint + uncentered) until another page was visited. Re-declare it
in HostList.css so it's correct on first load.
- The Sockopt dialerProxy dropdown listed balancer tags (useOutboundTags merges
them in for mtproto egress). dialerProxy chains a single outbound, so balancers
aren't valid — switch to useOutboundTagGroups and use only the outbound group.
* fix(outbounds): icon + 'Nothing here yet' empty state; stop fading other pages
The Outbounds empty state was a faint '—', and OutboundsTab.css set the global
.card-empty to opacity:0.4 — which leaked onto whichever page's empty state was
shown after the Outbounds CSS had loaded (e.g. Hosts went faint after visiting
Outbounds). Render the icon + noData ('Nothing here yet') like the other lists,
and align .card-empty to the shared centered/secondary style (no opacity).
* fix(outbounds): custom empty state on the desktop table too
The desktop Outbounds Table had no locale.emptyText, so it showed antd's
default 'No data' box. Add the same ExportOutlined + noData empty state as the
card (mobile) view.
* style(sidebar): use ExportOutlined for the Outbounds nav item
The Outbounds sidebar item used UploadOutlined (an upload tray). Switch to
ExportOutlined, matching the outbound icon now used in the routing target and
the outbounds empty states.
* feat(hosts): icons on the form tabs (icon-only on mobile)
Wrap every Host form tab label (Basic/Security/Advanced/Clash/Subscription
scope and the nested General/Mux/Sockopt/Final Mask) with catTabLabel, so the
tabs show icon + text on desktop and just the icon (with a tooltip) on mobile,
matching the Settings/Xray tab bars.
* refactor(hosts): fold Exclude-from-formats into Advanced, drop the one-field tab
The Subscription scope tab held only excludeFromSubTypes after Tags moved to
Basic — a niche per-format scoping knob. Move it into the Advanced > General
sub-tab and remove the standalone tab (and its now-unused subScope label/icon).
* feat(sub): per-client remark template variables; drop the remark model & Show Usage Info
* fix(migration): cap seeded host remark at the model's 256-char limit, not 40
* fix(api-docs): document clientIpsByGuid route
Restores a green `go test ./...` baseline: TestAPIRoutesDocumented
flagged POST /panel/api/clients/clientIpsByGuid (added in 9385b6c6)
as undocumented in endpoints.ts.
* test(node): characterize current node TLS + API auth behavior
Phase 0 regression net for the mTLS work. These pass on unchanged
production code and lock the pre-mTLS contracts so later phases can be
proven additive:
- tlsConfigForNode: skip -> InsecureSkipVerify (no VerifyConnection);
pin -> VerifyConnection installed.
- checkAPIAuth: bearer match -> Next + api_authed; unauthenticated ->
401 (XHR) / 404; valid session -> Next.
- panel HTTPS listener with no ClientAuth accepts a client that presents
no client certificate (the browsers-keep-working invariant).
* feat(crypto): node-auth CA + client-cert minting (TDD)
Stdlib-only ECDSA P-256 helpers for the node mTLS work:
- GenerateNodeCA: self-signed CA (IsCA, CertSign, path len 0)
- IssueClientCert: client-auth leaf (ExtKeyUsageClientAuth) signed by CA
- LoadCAFromPEM: parse a CA cert+key for issuing / trust-pool building
Tests assert the contract (leaf verifies against the issuing CA with
ExtKeyUsageClientAuth), seen failing on the assertion before impl.
* feat(node): lazy node mTLS CA + client cert in settings (TDD)
SettingService gains opt-in mTLS material, all stored as Setting rows
with empty defaults and kept out of entity.AllSetting (so private keys
never reach the settings UI/export):
- EnsureNodeMtlsCA: mint+persist the node-auth CA once, reuse thereafter
- EnsureMasterClientCert: issue the master client cert from the CA, idempotent
- NodeMtlsClientCAPool: ClientCAs trust pool for the listener; nil when
unconfigured so the no-mTLS path is unchanged
Tests assert idempotency and that the client cert verifies against the CA
for client auth; seen failing on the assertion before impl.
* feat(node): mtls client TLS config + master-cert provider (TDD)
tlsConfigForNode gains an 'mtls' branch that presents the master client
certificate and verifies the node server against system roots (no
InsecureSkipVerify, no custom RootCAs). The cert is supplied via an
injected MasterClientCertProvider so runtime need not import service;
it fails closed when unconfigured. skip/pin contracts unchanged.
* feat(node): allow tokenless mtls nodes in remote do() (TDD)
mtls nodes authenticate with a client certificate, so the bearer token
becomes optional for them: do() no longer rejects an empty ApiToken when
TlsVerifyMode is mtls, and the Authorization header is omitted when no
token is set. Every other mode still requires a token (regression kept).
* feat(node): authenticate verified client certs in checkAPIAuth (TDD)
A completed mTLS handshake (non-empty r.TLS.VerifiedChains) now
authenticates an API request, equivalent to a valid bearer token, and
sets api_authed so the CSRF middleware lets cert-authed mutations
through. Bearer/session/reject paths unchanged. The accept-path assert
was mutation-checked (guard flipped -> test red -> reverted).
* feat(node): opt-in mTLS on the panel listener (TDD; mutation-checked)
web.go now applies VerifyClientCertIfGiven + ClientCAs to the HTTPS
listener when a node trust CA is configured, and wires the master client
cert provider for outbound mtls calls. With no CA the listener is
byte-identical to before (browsers unaffected).
applyNodeMtls is covered end-to-end: no-cert client handshakes (browsers
keep working), a CA-signed client cert verifies, a foreign-CA cert is
rejected at the handshake. Mutation-checked:
- RequireAndVerifyClientCert -> no-cert client rejected (red) -> reverted
- drop ClientCAs -> master cert no longer trusted (red) -> reverted
* feat(node): accept mtls verify-mode + CA reveal endpoint (TDD)
- model.Node.TlsVerifyMode validator now accepts 'mtls'
- normalize() preserves mtls and requires the node scheme to be https
(fail closed), instead of clamping mtls back to verify
- NodeService.NodeMtlsCaCert + POST /panel/api/nodes/mtls/ca return this
panel's node-auth CA cert (public) to paste into a node, minting the CA
+ master client cert on first call
- endpoints.ts documents the new route (doc-sync test)
No model column added (enum is a string), so no migration/codegen.
* feat(node): node mTLS UI + trust-CA setter (TDD)
Backend:
- NodeService.SetNodeMtlsTrustCA + POST /panel/api/nodes/mtls/trustCA
store the CA this panel trusts for incoming node-API client certs
(validates PEM, empty clears); applied on next restart
- endpoints.ts + regenerated openapi.json document both mtls routes
Frontend:
- node form: 'mtls' TLS-verify option + setup hint (zod enum updated)
- Nodes page 'Node mTLS' card: copy this panel's CA, and paste/save the
trusted parent CA
- en-US i18n keys (other locales fall back to en-US)
Gates green: go build (native+windows), vet, go test ./...; frontend
typecheck, lint, vitest (541).
* style(node): gofmt web_mtls_test doc comment
* feat(node): hashed+zstd reconcile transport (TDD, negotiated, mixed-version safe)
Adds an integrity + compression envelope to node config pushes:
- internal/util/wirecodec: shared zstd codec (bomb-capped decode) +
SHA-256 hashing + the header/capability constants
- Remote.do(): always attaches X-Config-Sha256 of the uncompressed body;
zstd-compresses only when the node advertised support (learned from its
X-3x-Node-Caps response header) and the body is >=1KiB
- ConfigEnvelopeMiddleware on /panel/api: advertises the cap, decompresses
and verifies the hash (handler not invoked on mismatch) before binding
Mixed-version safe: old nodes never advertise the cap -> plain bodies;
the hash header is verify-if-present so any panel/node mix interoperates
(existing reconcile tests stay green). klauspost/compress promoted to a
direct dep. Hash-mismatch reject was mutation-checked (compare defeated
-> test red -> reverted).
* feat(node): per-node network throughput metrics (TDD)
The node status response already carries gopsutil netIO.up/down (summed
non-virtual interfaces), so no node-side change is needed:
- probe() parses netIO.up/down into HeartbeatPatch.NetUp/NetDown
- Node gains net_up/net_down columns (AutoMigrate); UpdateHeartbeat
persists them and appends netUp/netDown to the per-node metric history
- NodeMetricKeys whitelists netUp/netDown so the history endpoint serves them
- NodeHistoryPanel renders Net Up/Down sparklines (KB/s, no 0-100 clamp)
- regenerated frontend types + openapi.json for the new Node fields
* feat(node): move node mTLS controls into a toolbar button + modal
The Node mTLS panel was an always-visible card cluttering the nodes
page. Replace it with a 'Node mTLS' button beside 'Add node' that opens
a modal with the same copy-CA + trusted-parent-CA controls; the modal
closes on a successful save. No backend/i18n changes.
* i18n(node): translate mTLS + net-metrics keys for all locales
Adds the node mTLS strings (tlsMtls, mtlsFormHint, mtls.* dialog + the
saveMtls toast) and the netUp/netDown chart labels to all 12 non-English
catalogs (ar, es, fa, id, ja, pt, ru, tr, uk, vi, zh-CN, zh-TW), matching
each catalog's existing terminology. Technical tokens (mTLS/TLS/CA/API/
KB/s) kept verbatim.
* fix(node): address Copilot review on node-hardening PR
- setting_mtls: fail closed on a half-present CA/master-cert pair instead of
silently regenerating (which would rotate the CA and break fleet trust).
- config_envelope: reject non-zstd Content-Encoding on the envelope path
rather than hashing/forwarding a still-encoded body to the handler.
- node mTLS: support tokenless mTLS end-to-end — apiToken is now
required_unless tlsVerifyMode=mtls (model) with matching conditional
validation in NodeFormSchema, so the runtime allowance is actually reachable.
- NodesPage: add a catch block to onSaveTrustCa so save failures surface.
Surface the existing sockopt knobs (acceptProxyProtocol, trustedXForwardedFor) as a guided 'Real client IP' preset selector in the inbound form, so the real visitor IP is recovered behind Cloudflare CDN or an L4 tunnel/relay instead of recording the intermediary address. Presets are mutually exclusive, warn on incompatible transports, and add tooltips, docs, and translations for all locales.
* feat(notifications): event bus architecture with Telegram and SMTP subscribers
- Event bus core with buffered channel, fan-out, panic recovery
- Telegram subscriber with HTML formatting and rate limiting
- Email subscriber with SMTP/TLS/STARTTLS support and stage diagnostics
- 5 event types: outbound.down/up, xray.crash, cpu.high, login.attempt
- CPU threshold checks per subscriber (tgCpu for TG, smtpCpu for Email)
- SystemMetricData struct for raw metric values in events
- i18n keys for en-US, ru-RU, and English defaults for other locales
* fix
* fix(notifications): repair crash/CPU alerts, harden secrets, add node alerts
Bug fixes:
- Xray crash notifications were permanently suppressed after the first crash:
XrayStateTracker latched state="down" with no reset and no recovery event,
so only the first crash per process lifetime ever notified. Removed the
tracker; the existing 1/min rate limiter already dedupes crash-loop spam.
- Email CPU alerts could never fire unless Telegram was also enabled, because
the CPU job was registered only inside the tgbot block. Register it whenever
either Telegram or SMTP wants cpu.high (new cpuAlarmWanted gate) and relax
the cadence to @every 1m (cpu.Percent already samples over a full minute).
- SMTP password (and, pre-existing, all other secrets) were shipped to the
browser in plaintext: GetAllSettingView was dead code and /setting/all
returned the raw model. Wire getAllSetting -> GetAllSettingView, redact
smtpPassword with a hasSmtpPassword presence flag, and preserve it on blank
save. Closes the leak for tgBotToken/ldapPassword/2FA token too.
Polish:
- email Send: use nil SMTP auth when no credentials (Go refuses PlainAuth over
the unencrypted "none" transport).
- Remove unused EventClientDepleted; fix inaccurate bus.go doc comments; drop
stale tgBotLoginNotify from the frontend schema; gofmt alignment.
Feature - node online/offline alerts:
- Emit node.down/node.up from the heartbeat job on a real status transition
(with a startup-spam guard), reusing NodeHealthData. Formatted by both the
Telegram and email subscribers and selectable in the settings UI.
Regenerated frontend types (hasSmtpPassword). New i18n keys added to en-US;
other locales fall back to English (bundle default) until translated.
* fix(settings): use antd Space orientation instead of deprecated direction
Ant Design 6 deprecated Space's `direction` prop in favor of `orientation`,
which logged a console warning from the Telegram/Email notification tabs. Brings
these two tabs in line with the rest of the codebase, which already uses
`orientation`.
* i18n(notifications): translate the notification feature into all locales
The notifications PR shipped ~99 new strings (SMTP settings, event labels,
Telegram/email message templates) as English placeholders in every non-English
locale. Translate them — plus the node-alert keys added during this review —
into all 12 locales: Arabic, Spanish, Persian, Indonesian, Japanese,
Portuguese-BR, Russian, Turkish, Ukrainian, Vietnamese, and Simplified/
Traditional Chinese.
Go-template placeholders ({{ .Tag }}, {{ .Name }}, etc.) are preserved exactly;
tgbot message values carry no leading status emoji (the bot/email code adds
those, so an emoji in the value would duplicate it); product/protocol names
(SMTP, STARTTLS, TLS, CPU, Xray, Telegram) are kept as-is.
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
* feat(utils): add speedFormat utility and tests
* feat(inbounds): add InboundSpeedEntry type
* feat(inbounds): add speed column to inbound list
* feat(inbounds): show speed in inbound stats modal
* feat(inbounds): compute inbound speed from traffic deltas
* feat(inbounds): wire inbound speed through page
* feat(i18n): add speed translation for all locales
* refactor(inbounds): dedupe live-speed UI and harden formatting
Extract a shared InboundSpeedTag component and isActiveSpeed guard used by the speed column and stats modal, unify InboundSpeedEntry into a single type, and route speedFormat through sizeFormat.
Also guard sizeFormat against non-finite input (no more "NaN PB/s") and clear stale per-inbound speeds when a traffic poll returns no deltas.
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
Add a Links tab to the client form for attaching third-party share
links and remote subscription URLs per client. They are merged into
the client's raw/JSON/Clash subscription output: links are emitted
verbatim and parsed for JSON/Clash; subscription URLs are fetched
(cached, with a short timeout) and their configs merged in.
i18n keys added across all 13 locales.
- Split the Happ and Clash/Mihomo routing sections out of Information into
their own dedicated tabs.
- Extract the profile/branding fields (title, support URL, profile page,
announcement, theme dir) out of the mislabeled "Subscription Title"
divider into a new Profile tab.
- Move the Update Interval setting into Information and drop the
single-field Intervals tab.
- Add the "profile" tab label across all locales.
- Replace the Telegram "Notification Time" free-text field with a guided
cron builder: @every + number + unit (s/m/h), the @hourly/@daily/@weekly/
@monthly macros, and a Custom option that seeds a valid 6-field crontab
(cron runs with seconds enabled) as an escape hatch.
- Move "Restart Xray After Auto Disable" from the External Traffic tab to
Panel Settings, where it belongs.
- Add a "Template guide" link to the Sub Theme Directory setting pointing at
docs/custom-subscription-templates.md.
- Localize all new strings across every locale.
Add a per-inbound "Route through Xray" toggle (off by default) plus an
optional outbound picker on MTProto inbounds. mtg only supports a SOCKS5
upstream, so when enabled the panel injects a loopback SOCKS bridge into
the generated Xray config — tagged with the inbound's own tag — and mtg
dials Telegram through it via a [network] proxies upstream. The router
then governs Telegram egress: matchable in the Routing tab, or forced to a
chosen outbound/balancer via the picker.
- mtproto: Instance carries RouteThroughXray + XrayRoutePort (in the
fingerprint); InstanceFromInbound parses them; renderConfig emits the
socks5 [network] upstream; freeLocalPort exported as FreeLocalPort.
- xray.go: injectMtprotoEgress appends the loopback SOCKS bridge and
prepends an optional inboundTag->outbound/balancer rule, hot-appliable
like injectPanelEgress.
- inbound.go: backend-owned egress port persisted in settings, allocated
once and carried across edits (stored value wins); stripped with the
inert outboundTag when routing is off; allocation failure fails the save;
routed add/update/del force a config regen.
- mtproto_job: skip folding mtg metrics for routed inbounds (the bridge,
carrying the inbound tag, is metered by xray_traffic_job) to avoid
double-counting.
- frontend: toggle + outbound/balancer Select (useOutboundTags) on the
MTProto form; i18n keys for all locales.
Replace the per-outbound burstObservatory polling (one temp xray spawn +
up to 15s of /debug/vars polling per outbound, serialised) with one
shared temp xray instance per batch: every tested outbound gets its own
loopback SOCKS inbound plus an inboundTag->outboundTag routing rule, and
the panel times a real HTTP request through each one in parallel. The
probe returns as soon as the response lands and records the HTTP status
plus an httptrace breakdown (proxy connect / TLS via outbound / first
byte) shown in the result popover.
New POST /panel/api/xray/testOutbounds endpoint (array in, results in
input order, max 50); the legacy /testOutbound endpoint now delegates to
the same engine. Test All chunks HTTP probes 16 per request, and a batch
whose shared process never comes up (one structurally-broken outbound
poisons the config) retries each item in an isolated instance so the
broken outbound reports xray's real error while the rest still test.
Split the group traffic summary into two inbound-style cards: a "Total
upload / download" card with up/down arrow icons and a "Total Usage" card
with the pie icon. Add the totalUpDown label across all locales.
Add per-group up/down to GroupSummary (backend + schema), surface them
as Upload/Download columns in the groups table, and fold upload/download
into the Total traffic summary card. Rename the group "Clients in group"
column to just "Clients" across all locales.
Accept the @-prefixed abstract socket form (e.g. @xray/in.sock) for an
inbound listen address, not just path-based sockets. The form now allows
Port 0 for both, and the Address help text documents the @ form across
all locales. The backend already treated both prefixes as unix sockets.
@
Add a subSortIndex field to inbounds that controls the order of links
in subscription output only: the raw sub body, the HTML sub page, and
the JSON/Clash formats (all served from the same query). Lower values
come first; ties keep id order. The panel inbound list is unaffected.
The value is editable in the inbound form next to the share-address
fields, propagates to nodes via wireInbound, and follows the usual
node-sync rules (copied on import, mirrored while not dirty, never a
structural change).
Rescoped from #5214 by @Ponywka.
- Rename tabs: "Basic" → "Basics", "Config" → "Credentials"
- Move reverseTag field from Credentials tab to Basics tab
- Move IP log button inline with limitIp field (tooltip button, edit mode only)
- Hide random email button when editing an existing client
- Add tooltips to totalGB and limitIp fields with descriptive hints
- Rename labels: "Total Sent/Received (GB)" → "Traffic Limit (GB)", "Duration" → "Duration (days)"
- Add renewDays translation key for auto-renew label with unit hint
- Remove redundant filterOption and width style from AutoComplete group selectors
- Update all 15 locale files with new and renamed translation keys
Multi-node panels had no way to narrow the inbounds or clients lists to
a single node. Add a node filter to both pages:
- Inbounds: a toolbar select (All / Local / each node) that filters the
list client-side; shown only when the panel has nodes or node-attached
inbounds.
- Clients: a Nodes multi-select in the filter drawer. Node selections
are mapped onto inbound IDs client-side and fed through the existing
inbound CSV paging parameter, so the paging backend is untouched; an
impossible id (-1) is sent when no inbound matches so the filter
yields an honest empty result. InboundOption now carries nodeId to
make the mapping possible.
The local panel is selectable via a 0 sentinel (inbounds without a
nodeId). New i18n keys in all 13 locales.
The fallbacks card only renders for VLESS/Trojan over RAW with TLS or
Reality security, and a new inbound starts at security=none — so the Add
Inbound page looked like it had lost fallback support entirely. Show an
inline hint in that state pointing at the Security tab.
Subscriptions resolved a node-managed inbound's address to the node's
panel address unconditionally, so an inbound bound to a specific public
IP advertised an endpoint clients could not reach. The shareAddrStrategy
field added in #5162 only applied to panel share/QR links by design.
resolveInboundAddress now follows the same order as the panel's link
builder: 'listen' prefers a routable bind, 'custom' prefers shareAddr,
and the default 'node' keeps the existing node-first behavior, so output
is unchanged for inbounds that never set the field. Applies to raw,
JSON, and Clash subscriptions, which all resolve through this path.
Help text in all locales updated to drop the 'subscriptions are not
affected' caveat.
* feat: select node inbounds for synchronization
Allow node owners to import either all remote inbounds or an explicit tag-based selection. Add remote inbound discovery, persistence, snapshot filtering, API documentation, tests, and localized UI labels.
* fix
* fix: scope node reconcile and orphan sweep to selected inbound tags
In 'selected' sync mode unselected inbounds never enter the panel DB, so
ReconcileNode treated them as undesired and deleted them from the node the
first time it went config-dirty. Reconcile now only sweeps remote tags that
are part of the selection; everything else on the node is unmanaged.
Panel-created or renamed inbounds on a selected-mode node also vanished:
their tag was outside the selection, so the next traffic pull filtered them
out of the snapshot and the orphan sweep silently dropped the central row.
AddInbound/UpdateInbound now allow the tag on the node before committing.
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
Adopt xray-core's statsUserOnline policy and GetUsersStats RPC so online
detection is connection-based and IP limiting no longer requires an access
log. Falls back to the legacy traffic-delta onlines and access-log parsing
when the running core lacks the RPCs (Unimplemented), probed lazily per
process so a panel-driven version switch re-evaluates automatically.
Backend:
- xray/api.go: GetOnlineUsers (one GetUsersStats call returns all online
users and their source IPs) and IsUnimplementedErr.
- xray/process.go: per-process OnlineAPISupport tri-state capability cache.
- service/xray.go: ensureStatsPolicy injects statsUserOnline into every
policy level of the generated config; XrayService.GetOnlineUsers probes
and falls back.
- job/xray_traffic_job.go: union API onlines into the delta-derived active
set; bump last_online for idle-but-connected clients.
- job/check_client_ip_job.go: API-first IP source with shared enforcement;
live observations bypass the 30-min stale cutoff; access-log path
unchanged for older cores.
- service/setting.go: GetIpLimitEnable always true; new accessLogEnable
default for features that genuinely read the access log.
Frontend:
- Client form split into Basic and Config tabs; IP Limit and IP Log no
longer gated on access log; compact Auto Renew next to Start After First
Use; tabBasic/tabConfig added to all 13 locales.
- Xray logs button on the dashboard now gated on accessLogEnable.
* feat(ui): add select all / clear all shortcuts for inbound multi-select
Adds 'Select all' and 'Clear all' buttons above the inbound multi-select in:
- ClientFormModal (add/edit client)
- BulkAttachInboundsModal (bulk attach clients to inbounds)
- BulkDetachInboundsModal (bulk detach clients from inbounds)
- ClientBulkAddModal (add bulk clients)
Extracts the repeated button logic into a reusable SelectAllClearButtons component.
Includes i18n keys for all 13 supported languages with proper translations.
Closes#5144
* refactor(form): decouple SelectAllClearButtons labels and harden select-all
Accept optional selectAllLabel/clearLabel props so the generic form component is not tied to the client-inbound i18n keys (defaults unchanged). Compute the all-selected state by checking every option is present and union the current value on select-all, so it stays correct if value holds ids outside options.
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
* feat(sub): add Copy All Configs button to subscription page
* fix(sub): include links in copyAll dependency array
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* chore: fmt
* fix(sub): drop module-level links from copyAll deps to satisfy exhaustive-deps
links is derived from window.__SUB_PAGE_DATA__ at module scope, so listing it in the useCallback dependency array triggers a react-hooks/exhaustive-deps warning (outer-scope value). Matches the existing single-link copy callback's deps.
---------
Co-authored-by: nikan <nikan>
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
Instead of requiring a manual SOCKS5/HTTP URL, the panel now lets the
admin pick an Xray outbound from a dropdown (same UX as Geodata
Auto-Update). At runtime, injectPanelEgress appends a loopback SOCKS
inbound (tag: panel-egress) and prepends a routing rule so the panel's
own HTTP traffic — version checks, Telegram, normal geo-file updates —
is routed through the chosen outbound. Xray-native Geodata Auto-Update
is unaffected (it uses its own geodata.outbound inside Xray). Blackhole
outbounds are excluded from both picker dropdowns since routing any
download through one just drops it. Translations updated for all 13
locales.
Add a hot-apply layer that computes a diff between the old and new
generated config and applies only the changed parts through the Xray
gRPC HandlerService and RoutingService, avoiding a full process restart
whenever possible. A restart is still performed when sections that have
no reload API (log, dns, policy, observatory, ...) actually change.
Key additions:
- internal/xray/hot_diff.go: ComputeHotDiff with canonical-JSON
comparison (sorted keys, null=absent, full number precision) so UI
reformatting never triggers a spurious restart
- internal/xray/api.go: AddOutbound/DelOutbound, ApplyRoutingConfig,
GetBalancerInfo, SetBalancerTarget, TestRoute gRPC wrappers
- internal/web/service/xray.go: tryHotApply, ensureAPIServices,
GetBalancersStatus, OverrideBalancer, TestRoute service methods
- internal/web/controller/xray_setting.go: balancerStatus,
balancerOverride, routeTest API endpoints
- frontend: BalancersTab live-status/override columns, RouteTester
component, Restart button removed (Save now hot-applies)
- balancer-helpers.ts: syncObservatories never creates observatory
sections for random/roundRobin balancers (no reload API → restart)
- i18n: balancerLive/Override/routeTester keys added to all 13 locales
Remove the panel-side custom geo download feature (service, controller,
/panel/api/custom-geo/* endpoints, CustomGeoResource model, UI tab) in
favor of Xray-core's native geodata section
(https://xtls.github.io/config/geodata.html).
- pass the top-level "geodata" key through xray.Config so it survives
the template round-trip into the generated config
- add a Geodata Auto-Update section to the Xray Updates modal that
edits geodata (cron schedule, download outbound, asset list) in the
config template and restarts Xray on save
- previously downloaded geo files in the bin folder keep working in
ext: routing rules; the orphaned custom_geo_resources table is left
in place so existing source URLs stay recoverable
* refactor(service): split client.go into focused files
client.go had grown to 4455 lines mixing ~10 responsibilities. Split it
verbatim into cohesive same-package files (no behavior change):
client.go foundation: ClientService, ClientWithAttachments,
ClientCreatePayload, ErrClientNotInInbound, sqlInChunk
client_locks.go inbound mutation locks, delete tombstones, compactOrphans
client_lookup.go read-only lookups (GetByID, List, EffectiveFlow, ...)
client_link.go inbound association sync (SyncInbound, DetachInbound, ...)
client_crud.go single-client CRUD + validation + protocol defaults
client_inbound_apply.go low-level inbound-settings mutators + by-email setters
client_bulk.go bulk attach/detach/adjust/delete/create + DelDepleted
client_traffic.go traffic-reset paths
client_groups.go client group management
client_paging.go paged listing, filtering, sorting, summary
Every declaration moved unchanged (verified: identical func/type/const/var
signature set before vs after). Imports redistributed per file via goimports.
go build ./..., go vet, and go test ./web/service/... all pass.
* refactor(service): split inbound.go into focused files
inbound.go was 4100 lines. Split it verbatim into cohesive same-package
files (no behavior change):
inbound.go core inbound CRUD + InboundService (keeps pkg doc)
inbound_protocol.go protocol / stream capability helpers
inbound_node.go node/runtime/remote coordination + online tracking
inbound_traffic.go traffic accounting, reset, client stats
inbound_client_ips.go per-client IP tracking
inbound_clients.go client lookups within inbounds + copy-clients
inbound_disable.go auto-disable invalid inbounds/clients
inbound_migration.go DB migrations
inbound_sublink.go subscription link providers
inbound_util.go generic slice/string helpers
Identical func/type/const/var signature set before vs after; package doc
comment preserved on inbound.go. Imports redistributed via goimports.
Build, vet, and go test ./web/service/... all pass.
* refactor(service): split tgbot.go into focused files
tgbot.go was 3738 lines dominated by a 1246-line answerCallback. Split it
verbatim into cohesive same-package files (no behavior change):
tgbot.go lifecycle, bot setup, caches, small utils
tgbot_router.go incoming update / command / callback dispatch
tgbot_send.go outbound messaging primitives
tgbot_client.go client views, actions, subscription links
tgbot_inbound.go inbound listing / pickers
tgbot_report.go server usage, exhausted, online, backups, notifications
Identical func/type/const/var signature set before vs after. Imports
redistributed via goimports. Build, vet, and go test ./web/service/... pass.
* refactor(client): dedupe single-field by-email setters
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail, and
ResetClientTrafficLimitByEmail shared an identical ~50-line body that
resolves the inbound by email, confirms the client exists, rewrites a
single-client settings payload, and delegates to UpdateInboundClient.
Extract that into applyClientFieldByEmail(inboundSvc, email, mutate) and
reduce each setter to a 3-line wrapper. Behavior is unchanged: same checks
and error strings, same single-client payload contract, same totalGB guard.
SetClientTelegramUserID (resolves by traffic id, different error text) and
ToggleClientEnableByEmail/SetClientEnableByEmail (different return shape and
a pre-read of the old state) intentionally keep their own bodies.
* refactor(service): extract panel/ subpackage
Move the panel-administration leaf services out of the flat service
package into web/service/panel/ (package panel):
user.go UserService (auth / 2FA / LDAP)
panel.go PanelService (restart / self-update) + version helpers
panel_other.go non-unix RestartPanel
panel_unix.go unix RestartPanel
api_token.go ApiTokenService
websocket.go WebSocketService
panel_test.go version/shellQuote unit tests
These are leaves: they depend on core (SettingService, Release) but no
core file references them, so the extraction creates no import cycle.
Core references are now qualified (service.SettingService, service.Release);
callers in main.go, web/web.go, and web/controller/* updated to panel.*.
Build, vet, and go test ./web/... pass.
* refactor(service): extract integration/ subpackage
Move the external-provider integration leaves into web/service/integration/
(package integration):
warp.go WarpService (Cloudflare WARP)
nord.go NordService (NordVPN)
custom_geo.go CustomGeoService (custom geo asset management)
*_test.go custom_geo / panel-proxy tests
These depend on core (SettingService, ServerService, XraySettingService) but
no core file references them. xray_setting.go stays in core because it calls
the unexported SettingService.saveSetting. The shared isBlockedIP SSRF helper
(used by core url_safety.go and by custom_geo) now has a small copy in each
package rather than being exported. Core references qualified; callers in
web/web.go, web/job/*, and web/controller/* updated to integration.*.
Build, vet, and go test ./web/... pass.
* refactor(service): extract tgbot/ subpackage
Move the Telegram bot (6 files + test) into web/service/tgbot/ (package
tgbot). It is a leaf: it embeds five core services (Inbound/Client/Setting/
Server/Xray) and the core never references it, so no import cycle.
To support the package boundary without changing behavior:
- core exposes XrayProcess() *xray.Process so tgbot keeps calling the
exact same running-process methods it used via the package-level `p`;
- three core methods tgbot calls are exported: ClientService.checkIs-
EnabledByEmail -> CheckIsEnabledByEmail, InboundService.getAllEmails ->
GetAllEmails (callers updated in-package);
- tgbot's embedded-field types and the few core type refs (Status,
ClientCreatePayload, SanitizePublicHTTPURL) are now service-qualified.
Callers in main.go, web/web.go, web/job/*, and web/controller/* updated to
tgbot.*. Build, vet, and go test ./web/... pass.
* refactor(service): extract outbound/ subpackage
OutboundService (outbound.go) imports only neutral packages (config,
database, model, xray) and its production code is referenced by no core or
sibling service file — only by web/controller/xray_setting.go and
web/job/xray_traffic_job.go. Move it to web/service/outbound/ (package
outbound); no core qualification needed inside. Callers updated to outbound.*.
The one coupling was a tiny pure test helper, outboundsContainTag, used by
both outbound.go and the core outbound_subscription_test.go; it now has a
small copy in that test file rather than being shared across the boundary.
Build, vet, and go test ./web/... pass.
* refactor(util): move wireguard into its own subpackage
util/wireguard.go was the lone file of the root `util` package (24 lines,
one exported func GenerateWireguardKeypair), while every other util concern
lives in a focused subpackage (util/common, util/crypto, util/netsafe, ...).
Move it to util/wireguard/ (package wireguard) for consistency; its only
importer, web/service/integration/warp.go, is updated. The root `util`
package no longer exists.
* refactor(sub): drop redundant sub prefix from filenames
Inside package sub the subXxx.go prefix just repeats the package name
(like client_*.go did inside service). Rename for consistency; content and
type names are unchanged:
subController.go -> controller.go
subService.go -> service.go
subClashService.go -> clash_service.go
subJsonService.go -> json_service.go
(+ matching _test.go files)
* refactor(controller): rename xui.go -> spa.go
XUIController serves the panel's single-page-app shell; spa.go names that
role plainly (the other controller files are domain-named). File rename only
— the type stays XUIController. api_docs_test.go keys route base paths by
filename, so its "xui.go" case is updated to "spa.go".
* refactor: move backend packages under internal/
Adopt the idiomatic Go application layout: the backend packages now live
under internal/ (a boundary the toolchain enforces), signalling private
implementation instead of a library-style flat root. No runtime behavior
changes — only import paths and a few build/config paths move.
Moved: config, database, logger, mtproto, sub, util, web, xray -> internal/.
main.go stays at the repo root and tools/openapigen stays under tools/ (both
still import internal/* because the internal rule keys off the module root).
The module path github.com/mhsanaei/3x-ui/v3 is unchanged; 149 .go files had
their import prefix rewritten to .../internal/<pkg>.
Couplings the Go compiler can't see, updated to the new layout:
- frontend i18n imports of web/translation (react.ts, setup.components.ts)
- vite outDir + eslint/tsconfig ignore globs -> internal/web/dist
- Dockerfile COPY paths for web/dist and web/translation
- locale.go os.DirFS("web") disk fallback -> "internal/web"
- .gitignore and ci.yml go:embed stub for internal/web/dist
- api_docs_test.go repo-root relative walk (one level deeper)
- tools/openapigen filesystem package paths; ApiTokenView repointed to the
web/service/panel subpackage and codegen regenerated (clears a stale
type the ci.yml codegen check was failing on)
Verified: go build/vet/test (all packages), and frontend typecheck, lint,
vitest (478 tests), and production build into internal/web/dist.
* fix(config): keep test runs from writing logs into the source tree
GetLogFolder() returns a CWD-relative "./log" on Windows. Under `go test`
the working directory is each package's own folder, so InitLogger (called by
tests in web/job, web/service, xray, web/websocket) created stray log/
directories scattered through the source tree (e.g. internal/web/job/log/).
Redirect to a shared temp folder when testing.Testing() reports a test run.
Production behavior is unchanged: Windows still uses ./log next to the binary
and Linux /var/log/x-ui. The log files were always gitignored (*.log) and
never committed; this just stops the noise at the source.
* docs: move subscription-template guide out of root into docs/
sub_templates/ was a top-level folder holding only a README and no actual
templates (3x-ui ships none by design), referenced nowhere and unlinked from
any doc — it read like an empty placeholder cluttering the repo root.
Move the guide to docs/custom-subscription-templates.md (a proper docs home),
reword its intro to read as documentation rather than a folder note, link it
from the Features list in README.md, and drop the empty sub_templates/ folder.
* fix: update stale web/ path references after the internal/ move
The internal/ migration rewrote Go import paths but left some references to
the old top-level layout in docs, comments, and a few runtime disk paths.
Functional (dev-mode only): the disk-serving fallbacks that read the Vite
build from disk when running from source still pointed at web/dist/, which
moved to internal/web/dist/ — so `os.DirFS`/`os.Stat`/`os.ReadFile` in
internal/web/web.go and internal/sub/{sub,controller}.go are corrected.
Production was unaffected (it serves the embedded FS; verified by the Docker
build), but `go run` with a live frontend build silently fell back to embed.
Docs/comments: frontend/README.md, CONTRIBUTING.md, the claude-issue-bot and
release workflows, the openapigen -root help text, and assorted Go comments
now reference internal/web, internal/database, internal/sub, internal/xray,
etc. Package-name mentions (the "web" package), root paths (main.go,
frontend/, install scripts, /etc/x-ui), routes (/panel/api/xray), and the
historical "web/assets no longer exists" note were intentionally left as-is.
* refactor(web): remove the legacy /xui -> /panel redirect middleware
RedirectMiddleware existed only for backward compatibility with the old
`/xui` URL scheme (301-redirecting /xui and /xui/API to /panel and
/panel/api). That cutover was long ago, so drop the middleware, its
registration in initRouter, and the now-inaccurate "URL redirection"
mention in the middleware package doc. Old /xui URLs now 404 like any other
unknown path. HTTPS auto-redirect and auth redirects are unrelated and stay.
* build: fix .dockerignore for internal/ layout and exclude runtime dir
- web/dist -> internal/web/dist: the embedded frontend moved under internal/,
so the stale exclude no longer matched and the locally-built dist could be
sent to the build context (the frontend stage rebuilds it fresh anyway).
- exclude x-ui/: the local runtime directory (SQLite db, geo .dat files, xray
binaries, certs — ~150MB) was being shipped into the build context for no
reason. Verified the pattern excludes only the directory and still keeps
x-ui.sh, which the Dockerfile copies to /usr/bin/x-ui.