Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
package controller
|
|
|
|
|
|
|
|
|
|
import (
|
2026-06-21 14:06:10 -07:00
|
|
|
"encoding/json"
|
feat(happ): generate Crypt5 subscription links locally (#6494)
* feat(clients): add stateless Happ link generator
Generate Happ provider links from the current effective subscription source without caching results. Reject unsafe provider responses and redact failure diagnostics.
* fix(clients): reject duplicate Happ provider fields
Parse Happ provider objects token by token so duplicate supported keys cannot be silently overwritten by encoding/json.
* feat(clients): expose on-demand Happ link API
Expose a no-store client endpoint backed by the Happ link generator and keep its generated OpenAPI contract synchronized.
* fix(openapi): exclude service interfaces from generated types
Keep dependency-injection interfaces out of the frontend API surface while preserving allowed response schemas.
* feat(clients): add stateless Happ QR presentation
Generate Happ links only for the active modal scope and retire late responses so Standard remains immediately available. Add focused component coverage and localized retry guidance across every locale.
* fix(clients): cover overlapping Happ generations
Prove the cancellation cleanup is required by resolving a retired request while its replacement remains pending. Also wait for Regenerate to leave loading state before exercising the existing action.
* fix(clients): harden Happ link handling
Validate generated responses before rendering and hide actions during unresolved requests. Strengthen route, redirect, timeout, and lint regression coverage with mutation-sensitive tests.
* fix(clients): gate Happ link generation behind operator opt-in
- add a fail-closed happLinkEnable setting
- enforce the gate before and after provider requests
- add locked Happ QR state with privacy disclosure and settings link
- cover backend, frontend, settings, and i18n regressions
* fix(frontend): guard oversized Happ QR codes
Keep valid long crypt5 links copyable while suppressing QR rendering and image actions above the encoder's UTF-8 byte limit. Add localized guidance and boundary coverage.
* fix(clients): log the sanitized transport error for Happ link failures
Every fail() call in HappService.Generate passed a string literal as the
detail, so the sanitizer written for provider errors only ever saw
constants, and an operator following the QR modal's "check Logs" hint
found nothing beyond reason=transport. Transport and body-read errors now
flow through sanitizeHappDetail, which also redacts cookie/session pairs.
Drop TestHappLinkEnableDefaultsOffWithoutPersistingRow: it pinned a getter
and its constant default, which the Generate gate test already drives.
* fix(frontend): size the Happ QR cap to level L and keep the QR modal mounted on close
HAPP_QR_MAX_BYTES was the level-M capacity (2331) while QrPanel encodes at
errorLevel "L", whose version-40 byte-mode capacity is 2953, so valid links
between 2332 and 2953 bytes lost their QR. The cap now matches the encoder
and a test renders the real QrPanel at the boundary.
Keying the modal content on `open` remounted it on every close, which cut
the Modal's exit transition and made the openSubId sync unreachable, so
`loading` never turned on for the subLinks fetch and a client without a
subscription link flashed noLinks on reopen. `open` leaves the key and the
sync block now also resets the Happ state.
* chore(clients): request Happ crypt5 links from api-v3
crypto.happ.su serves api-v2.php and api-v3.php side by side. Probed with
the same payloads, both take {"url"} over a JSON POST, answer
{"encrypted_link":"happ://crypt5/..."} of identical length with the same
crypt5 key marker, and fail the same way: 400 "No url provided.",
500 "Invalid URL format.", 405 on GET. Happ's own generator page is
branded "URL Encryption v3", so the panel follows it. The parser and the
link validator are unchanged.
* feat: add local generation of encrypted Happ links
- Implemented functionality to generate encrypted Happ links locally without network dependency.
- Added validation for URL length and format to ensure compliance with processing limits.
- Introduced new error handling for invalid URLs and control characters.
- Updated translations for various languages to reflect changes in Happ link generation.
- Created unit tests to validate the encryption process and ensure session keys and nonces are unique.
* fix(frontend): match the tuic memo deps to the non-optional subSettings
The Happ branch reads subSettings non-optionally in ClientQrModalContent
(happLinkEnable and the WireGuard/AmneziaWG publicHost memos), so React
Compiler infers subSettings.publicHost. The TUIC memo merged in from main
still listed subSettings?.publicHost, which fails oxlint's
preserve-manual-memoization rule and makes the compiler skip optimizing
the component. make verify stopped at lint-fe on the branch head.
* chore(happ): trim the pinned-key provenance comment to two lines
CLAUDE.md caps a comment block at two lines. The bare URL line repeated
the repository and file the next line already names, so it is folded
into that line (review LOW on happ_crypto.go).
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
2026-09-13 03:44:55 -07:00
|
|
|
"errors"
|
|
|
|
|
"net/http"
|
2026-06-04 07:45:40 -07:00
|
|
|
"strconv"
|
|
|
|
|
"strings"
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
|
refactor: focused service files, leaf subpackages, and an internal/ layout (#5167)
* refactor(service): split client.go into focused files
client.go had grown to 4455 lines mixing ~10 responsibilities. Split it
verbatim into cohesive same-package files (no behavior change):
client.go foundation: ClientService, ClientWithAttachments,
ClientCreatePayload, ErrClientNotInInbound, sqlInChunk
client_locks.go inbound mutation locks, delete tombstones, compactOrphans
client_lookup.go read-only lookups (GetByID, List, EffectiveFlow, ...)
client_link.go inbound association sync (SyncInbound, DetachInbound, ...)
client_crud.go single-client CRUD + validation + protocol defaults
client_inbound_apply.go low-level inbound-settings mutators + by-email setters
client_bulk.go bulk attach/detach/adjust/delete/create + DelDepleted
client_traffic.go traffic-reset paths
client_groups.go client group management
client_paging.go paged listing, filtering, sorting, summary
Every declaration moved unchanged (verified: identical func/type/const/var
signature set before vs after). Imports redistributed per file via goimports.
go build ./..., go vet, and go test ./web/service/... all pass.
* refactor(service): split inbound.go into focused files
inbound.go was 4100 lines. Split it verbatim into cohesive same-package
files (no behavior change):
inbound.go core inbound CRUD + InboundService (keeps pkg doc)
inbound_protocol.go protocol / stream capability helpers
inbound_node.go node/runtime/remote coordination + online tracking
inbound_traffic.go traffic accounting, reset, client stats
inbound_client_ips.go per-client IP tracking
inbound_clients.go client lookups within inbounds + copy-clients
inbound_disable.go auto-disable invalid inbounds/clients
inbound_migration.go DB migrations
inbound_sublink.go subscription link providers
inbound_util.go generic slice/string helpers
Identical func/type/const/var signature set before vs after; package doc
comment preserved on inbound.go. Imports redistributed via goimports.
Build, vet, and go test ./web/service/... all pass.
* refactor(service): split tgbot.go into focused files
tgbot.go was 3738 lines dominated by a 1246-line answerCallback. Split it
verbatim into cohesive same-package files (no behavior change):
tgbot.go lifecycle, bot setup, caches, small utils
tgbot_router.go incoming update / command / callback dispatch
tgbot_send.go outbound messaging primitives
tgbot_client.go client views, actions, subscription links
tgbot_inbound.go inbound listing / pickers
tgbot_report.go server usage, exhausted, online, backups, notifications
Identical func/type/const/var signature set before vs after. Imports
redistributed via goimports. Build, vet, and go test ./web/service/... pass.
* refactor(client): dedupe single-field by-email setters
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail, and
ResetClientTrafficLimitByEmail shared an identical ~50-line body that
resolves the inbound by email, confirms the client exists, rewrites a
single-client settings payload, and delegates to UpdateInboundClient.
Extract that into applyClientFieldByEmail(inboundSvc, email, mutate) and
reduce each setter to a 3-line wrapper. Behavior is unchanged: same checks
and error strings, same single-client payload contract, same totalGB guard.
SetClientTelegramUserID (resolves by traffic id, different error text) and
ToggleClientEnableByEmail/SetClientEnableByEmail (different return shape and
a pre-read of the old state) intentionally keep their own bodies.
* refactor(service): extract panel/ subpackage
Move the panel-administration leaf services out of the flat service
package into web/service/panel/ (package panel):
user.go UserService (auth / 2FA / LDAP)
panel.go PanelService (restart / self-update) + version helpers
panel_other.go non-unix RestartPanel
panel_unix.go unix RestartPanel
api_token.go ApiTokenService
websocket.go WebSocketService
panel_test.go version/shellQuote unit tests
These are leaves: they depend on core (SettingService, Release) but no
core file references them, so the extraction creates no import cycle.
Core references are now qualified (service.SettingService, service.Release);
callers in main.go, web/web.go, and web/controller/* updated to panel.*.
Build, vet, and go test ./web/... pass.
* refactor(service): extract integration/ subpackage
Move the external-provider integration leaves into web/service/integration/
(package integration):
warp.go WarpService (Cloudflare WARP)
nord.go NordService (NordVPN)
custom_geo.go CustomGeoService (custom geo asset management)
*_test.go custom_geo / panel-proxy tests
These depend on core (SettingService, ServerService, XraySettingService) but
no core file references them. xray_setting.go stays in core because it calls
the unexported SettingService.saveSetting. The shared isBlockedIP SSRF helper
(used by core url_safety.go and by custom_geo) now has a small copy in each
package rather than being exported. Core references qualified; callers in
web/web.go, web/job/*, and web/controller/* updated to integration.*.
Build, vet, and go test ./web/... pass.
* refactor(service): extract tgbot/ subpackage
Move the Telegram bot (6 files + test) into web/service/tgbot/ (package
tgbot). It is a leaf: it embeds five core services (Inbound/Client/Setting/
Server/Xray) and the core never references it, so no import cycle.
To support the package boundary without changing behavior:
- core exposes XrayProcess() *xray.Process so tgbot keeps calling the
exact same running-process methods it used via the package-level `p`;
- three core methods tgbot calls are exported: ClientService.checkIs-
EnabledByEmail -> CheckIsEnabledByEmail, InboundService.getAllEmails ->
GetAllEmails (callers updated in-package);
- tgbot's embedded-field types and the few core type refs (Status,
ClientCreatePayload, SanitizePublicHTTPURL) are now service-qualified.
Callers in main.go, web/web.go, web/job/*, and web/controller/* updated to
tgbot.*. Build, vet, and go test ./web/... pass.
* refactor(service): extract outbound/ subpackage
OutboundService (outbound.go) imports only neutral packages (config,
database, model, xray) and its production code is referenced by no core or
sibling service file — only by web/controller/xray_setting.go and
web/job/xray_traffic_job.go. Move it to web/service/outbound/ (package
outbound); no core qualification needed inside. Callers updated to outbound.*.
The one coupling was a tiny pure test helper, outboundsContainTag, used by
both outbound.go and the core outbound_subscription_test.go; it now has a
small copy in that test file rather than being shared across the boundary.
Build, vet, and go test ./web/... pass.
* refactor(util): move wireguard into its own subpackage
util/wireguard.go was the lone file of the root `util` package (24 lines,
one exported func GenerateWireguardKeypair), while every other util concern
lives in a focused subpackage (util/common, util/crypto, util/netsafe, ...).
Move it to util/wireguard/ (package wireguard) for consistency; its only
importer, web/service/integration/warp.go, is updated. The root `util`
package no longer exists.
* refactor(sub): drop redundant sub prefix from filenames
Inside package sub the subXxx.go prefix just repeats the package name
(like client_*.go did inside service). Rename for consistency; content and
type names are unchanged:
subController.go -> controller.go
subService.go -> service.go
subClashService.go -> clash_service.go
subJsonService.go -> json_service.go
(+ matching _test.go files)
* refactor(controller): rename xui.go -> spa.go
XUIController serves the panel's single-page-app shell; spa.go names that
role plainly (the other controller files are domain-named). File rename only
— the type stays XUIController. api_docs_test.go keys route base paths by
filename, so its "xui.go" case is updated to "spa.go".
* refactor: move backend packages under internal/
Adopt the idiomatic Go application layout: the backend packages now live
under internal/ (a boundary the toolchain enforces), signalling private
implementation instead of a library-style flat root. No runtime behavior
changes — only import paths and a few build/config paths move.
Moved: config, database, logger, mtproto, sub, util, web, xray -> internal/.
main.go stays at the repo root and tools/openapigen stays under tools/ (both
still import internal/* because the internal rule keys off the module root).
The module path github.com/mhsanaei/3x-ui/v3 is unchanged; 149 .go files had
their import prefix rewritten to .../internal/<pkg>.
Couplings the Go compiler can't see, updated to the new layout:
- frontend i18n imports of web/translation (react.ts, setup.components.ts)
- vite outDir + eslint/tsconfig ignore globs -> internal/web/dist
- Dockerfile COPY paths for web/dist and web/translation
- locale.go os.DirFS("web") disk fallback -> "internal/web"
- .gitignore and ci.yml go:embed stub for internal/web/dist
- api_docs_test.go repo-root relative walk (one level deeper)
- tools/openapigen filesystem package paths; ApiTokenView repointed to the
web/service/panel subpackage and codegen regenerated (clears a stale
type the ci.yml codegen check was failing on)
Verified: go build/vet/test (all packages), and frontend typecheck, lint,
vitest (478 tests), and production build into internal/web/dist.
* fix(config): keep test runs from writing logs into the source tree
GetLogFolder() returns a CWD-relative "./log" on Windows. Under `go test`
the working directory is each package's own folder, so InitLogger (called by
tests in web/job, web/service, xray, web/websocket) created stray log/
directories scattered through the source tree (e.g. internal/web/job/log/).
Redirect to a shared temp folder when testing.Testing() reports a test run.
Production behavior is unchanged: Windows still uses ./log next to the binary
and Linux /var/log/x-ui. The log files were always gitignored (*.log) and
never committed; this just stops the noise at the source.
* docs: move subscription-template guide out of root into docs/
sub_templates/ was a top-level folder holding only a README and no actual
templates (3x-ui ships none by design), referenced nowhere and unlinked from
any doc — it read like an empty placeholder cluttering the repo root.
Move the guide to docs/custom-subscription-templates.md (a proper docs home),
reword its intro to read as documentation rather than a folder note, link it
from the Features list in README.md, and drop the empty sub_templates/ folder.
* fix: update stale web/ path references after the internal/ move
The internal/ migration rewrote Go import paths but left some references to
the old top-level layout in docs, comments, and a few runtime disk paths.
Functional (dev-mode only): the disk-serving fallbacks that read the Vite
build from disk when running from source still pointed at web/dist/, which
moved to internal/web/dist/ — so `os.DirFS`/`os.Stat`/`os.ReadFile` in
internal/web/web.go and internal/sub/{sub,controller}.go are corrected.
Production was unaffected (it serves the embedded FS; verified by the Docker
build), but `go run` with a live frontend build silently fell back to embed.
Docs/comments: frontend/README.md, CONTRIBUTING.md, the claude-issue-bot and
release workflows, the openapigen -root help text, and assorted Go comments
now reference internal/web, internal/database, internal/sub, internal/xray,
etc. Package-name mentions (the "web" package), root paths (main.go,
frontend/, install scripts, /etc/x-ui), routes (/panel/api/xray), and the
historical "web/assets no longer exists" note were intentionally left as-is.
* refactor(web): remove the legacy /xui -> /panel redirect middleware
RedirectMiddleware existed only for backward compatibility with the old
`/xui` URL scheme (301-redirecting /xui and /xui/API to /panel and
/panel/api). That cutover was long ago, so drop the middleware, its
registration in initRouter, and the now-inaccurate "URL redirection"
mention in the middleware package doc. Old /xui URLs now 404 like any other
unknown path. HTTPS auto-redirect and auth redirects are unrelated and stay.
* build: fix .dockerignore for internal/ layout and exclude runtime dir
- web/dist -> internal/web/dist: the embedded frontend moved under internal/,
so the stale exclude no longer matched and the locally-built dist could be
sent to the build context (the frontend stage rebuilds it fresh anyway).
- exclude x-ui/: the local runtime directory (SQLite db, geo .dat files, xray
binaries, certs — ~150MB) was being shipped into the build context for no
reason. Verified the pattern excludes only the directory and still keeps
x-ui.sh, which the Dockerfile copies to /usr/bin/x-ui.
2026-06-10 06:19:22 -07:00
|
|
|
"github.com/mhsanaei/3x-ui/v3/internal/database/model"
|
feat(happ): generate Crypt5 subscription links locally (#6494)
* feat(clients): add stateless Happ link generator
Generate Happ provider links from the current effective subscription source without caching results. Reject unsafe provider responses and redact failure diagnostics.
* fix(clients): reject duplicate Happ provider fields
Parse Happ provider objects token by token so duplicate supported keys cannot be silently overwritten by encoding/json.
* feat(clients): expose on-demand Happ link API
Expose a no-store client endpoint backed by the Happ link generator and keep its generated OpenAPI contract synchronized.
* fix(openapi): exclude service interfaces from generated types
Keep dependency-injection interfaces out of the frontend API surface while preserving allowed response schemas.
* feat(clients): add stateless Happ QR presentation
Generate Happ links only for the active modal scope and retire late responses so Standard remains immediately available. Add focused component coverage and localized retry guidance across every locale.
* fix(clients): cover overlapping Happ generations
Prove the cancellation cleanup is required by resolving a retired request while its replacement remains pending. Also wait for Regenerate to leave loading state before exercising the existing action.
* fix(clients): harden Happ link handling
Validate generated responses before rendering and hide actions during unresolved requests. Strengthen route, redirect, timeout, and lint regression coverage with mutation-sensitive tests.
* fix(clients): gate Happ link generation behind operator opt-in
- add a fail-closed happLinkEnable setting
- enforce the gate before and after provider requests
- add locked Happ QR state with privacy disclosure and settings link
- cover backend, frontend, settings, and i18n regressions
* fix(frontend): guard oversized Happ QR codes
Keep valid long crypt5 links copyable while suppressing QR rendering and image actions above the encoder's UTF-8 byte limit. Add localized guidance and boundary coverage.
* fix(clients): log the sanitized transport error for Happ link failures
Every fail() call in HappService.Generate passed a string literal as the
detail, so the sanitizer written for provider errors only ever saw
constants, and an operator following the QR modal's "check Logs" hint
found nothing beyond reason=transport. Transport and body-read errors now
flow through sanitizeHappDetail, which also redacts cookie/session pairs.
Drop TestHappLinkEnableDefaultsOffWithoutPersistingRow: it pinned a getter
and its constant default, which the Generate gate test already drives.
* fix(frontend): size the Happ QR cap to level L and keep the QR modal mounted on close
HAPP_QR_MAX_BYTES was the level-M capacity (2331) while QrPanel encodes at
errorLevel "L", whose version-40 byte-mode capacity is 2953, so valid links
between 2332 and 2953 bytes lost their QR. The cap now matches the encoder
and a test renders the real QrPanel at the boundary.
Keying the modal content on `open` remounted it on every close, which cut
the Modal's exit transition and made the openSubId sync unreachable, so
`loading` never turned on for the subLinks fetch and a client without a
subscription link flashed noLinks on reopen. `open` leaves the key and the
sync block now also resets the Happ state.
* chore(clients): request Happ crypt5 links from api-v3
crypto.happ.su serves api-v2.php and api-v3.php side by side. Probed with
the same payloads, both take {"url"} over a JSON POST, answer
{"encrypted_link":"happ://crypt5/..."} of identical length with the same
crypt5 key marker, and fail the same way: 400 "No url provided.",
500 "Invalid URL format.", 405 on GET. Happ's own generator page is
branded "URL Encryption v3", so the panel follows it. The parser and the
link validator are unchanged.
* feat: add local generation of encrypted Happ links
- Implemented functionality to generate encrypted Happ links locally without network dependency.
- Added validation for URL length and format to ensure compliance with processing limits.
- Introduced new error handling for invalid URLs and control characters.
- Updated translations for various languages to reflect changes in Happ link generation.
- Created unit tests to validate the encryption process and ensure session keys and nonces are unique.
* fix(frontend): match the tuic memo deps to the non-optional subSettings
The Happ branch reads subSettings non-optionally in ClientQrModalContent
(happLinkEnable and the WireGuard/AmneziaWG publicHost memos), so React
Compiler infers subSettings.publicHost. The TUIC memo merged in from main
still listed subSettings?.publicHost, which fails oxlint's
preserve-manual-memoization rule and makes the compiler skip optimizing
the component. make verify stopped at lint-fe on the branch head.
* chore(happ): trim the pinned-key provenance comment to two lines
CLAUDE.md caps a comment block at two lines. The bare URL line repeated
the repository and file the next line already names, so it is folded
into that line (review LOW on happ_crypto.go).
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
2026-09-13 03:44:55 -07:00
|
|
|
"github.com/mhsanaei/3x-ui/v3/internal/web/entity"
|
refactor: focused service files, leaf subpackages, and an internal/ layout (#5167)
* refactor(service): split client.go into focused files
client.go had grown to 4455 lines mixing ~10 responsibilities. Split it
verbatim into cohesive same-package files (no behavior change):
client.go foundation: ClientService, ClientWithAttachments,
ClientCreatePayload, ErrClientNotInInbound, sqlInChunk
client_locks.go inbound mutation locks, delete tombstones, compactOrphans
client_lookup.go read-only lookups (GetByID, List, EffectiveFlow, ...)
client_link.go inbound association sync (SyncInbound, DetachInbound, ...)
client_crud.go single-client CRUD + validation + protocol defaults
client_inbound_apply.go low-level inbound-settings mutators + by-email setters
client_bulk.go bulk attach/detach/adjust/delete/create + DelDepleted
client_traffic.go traffic-reset paths
client_groups.go client group management
client_paging.go paged listing, filtering, sorting, summary
Every declaration moved unchanged (verified: identical func/type/const/var
signature set before vs after). Imports redistributed per file via goimports.
go build ./..., go vet, and go test ./web/service/... all pass.
* refactor(service): split inbound.go into focused files
inbound.go was 4100 lines. Split it verbatim into cohesive same-package
files (no behavior change):
inbound.go core inbound CRUD + InboundService (keeps pkg doc)
inbound_protocol.go protocol / stream capability helpers
inbound_node.go node/runtime/remote coordination + online tracking
inbound_traffic.go traffic accounting, reset, client stats
inbound_client_ips.go per-client IP tracking
inbound_clients.go client lookups within inbounds + copy-clients
inbound_disable.go auto-disable invalid inbounds/clients
inbound_migration.go DB migrations
inbound_sublink.go subscription link providers
inbound_util.go generic slice/string helpers
Identical func/type/const/var signature set before vs after; package doc
comment preserved on inbound.go. Imports redistributed via goimports.
Build, vet, and go test ./web/service/... all pass.
* refactor(service): split tgbot.go into focused files
tgbot.go was 3738 lines dominated by a 1246-line answerCallback. Split it
verbatim into cohesive same-package files (no behavior change):
tgbot.go lifecycle, bot setup, caches, small utils
tgbot_router.go incoming update / command / callback dispatch
tgbot_send.go outbound messaging primitives
tgbot_client.go client views, actions, subscription links
tgbot_inbound.go inbound listing / pickers
tgbot_report.go server usage, exhausted, online, backups, notifications
Identical func/type/const/var signature set before vs after. Imports
redistributed via goimports. Build, vet, and go test ./web/service/... pass.
* refactor(client): dedupe single-field by-email setters
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail, and
ResetClientTrafficLimitByEmail shared an identical ~50-line body that
resolves the inbound by email, confirms the client exists, rewrites a
single-client settings payload, and delegates to UpdateInboundClient.
Extract that into applyClientFieldByEmail(inboundSvc, email, mutate) and
reduce each setter to a 3-line wrapper. Behavior is unchanged: same checks
and error strings, same single-client payload contract, same totalGB guard.
SetClientTelegramUserID (resolves by traffic id, different error text) and
ToggleClientEnableByEmail/SetClientEnableByEmail (different return shape and
a pre-read of the old state) intentionally keep their own bodies.
* refactor(service): extract panel/ subpackage
Move the panel-administration leaf services out of the flat service
package into web/service/panel/ (package panel):
user.go UserService (auth / 2FA / LDAP)
panel.go PanelService (restart / self-update) + version helpers
panel_other.go non-unix RestartPanel
panel_unix.go unix RestartPanel
api_token.go ApiTokenService
websocket.go WebSocketService
panel_test.go version/shellQuote unit tests
These are leaves: they depend on core (SettingService, Release) but no
core file references them, so the extraction creates no import cycle.
Core references are now qualified (service.SettingService, service.Release);
callers in main.go, web/web.go, and web/controller/* updated to panel.*.
Build, vet, and go test ./web/... pass.
* refactor(service): extract integration/ subpackage
Move the external-provider integration leaves into web/service/integration/
(package integration):
warp.go WarpService (Cloudflare WARP)
nord.go NordService (NordVPN)
custom_geo.go CustomGeoService (custom geo asset management)
*_test.go custom_geo / panel-proxy tests
These depend on core (SettingService, ServerService, XraySettingService) but
no core file references them. xray_setting.go stays in core because it calls
the unexported SettingService.saveSetting. The shared isBlockedIP SSRF helper
(used by core url_safety.go and by custom_geo) now has a small copy in each
package rather than being exported. Core references qualified; callers in
web/web.go, web/job/*, and web/controller/* updated to integration.*.
Build, vet, and go test ./web/... pass.
* refactor(service): extract tgbot/ subpackage
Move the Telegram bot (6 files + test) into web/service/tgbot/ (package
tgbot). It is a leaf: it embeds five core services (Inbound/Client/Setting/
Server/Xray) and the core never references it, so no import cycle.
To support the package boundary without changing behavior:
- core exposes XrayProcess() *xray.Process so tgbot keeps calling the
exact same running-process methods it used via the package-level `p`;
- three core methods tgbot calls are exported: ClientService.checkIs-
EnabledByEmail -> CheckIsEnabledByEmail, InboundService.getAllEmails ->
GetAllEmails (callers updated in-package);
- tgbot's embedded-field types and the few core type refs (Status,
ClientCreatePayload, SanitizePublicHTTPURL) are now service-qualified.
Callers in main.go, web/web.go, web/job/*, and web/controller/* updated to
tgbot.*. Build, vet, and go test ./web/... pass.
* refactor(service): extract outbound/ subpackage
OutboundService (outbound.go) imports only neutral packages (config,
database, model, xray) and its production code is referenced by no core or
sibling service file — only by web/controller/xray_setting.go and
web/job/xray_traffic_job.go. Move it to web/service/outbound/ (package
outbound); no core qualification needed inside. Callers updated to outbound.*.
The one coupling was a tiny pure test helper, outboundsContainTag, used by
both outbound.go and the core outbound_subscription_test.go; it now has a
small copy in that test file rather than being shared across the boundary.
Build, vet, and go test ./web/... pass.
* refactor(util): move wireguard into its own subpackage
util/wireguard.go was the lone file of the root `util` package (24 lines,
one exported func GenerateWireguardKeypair), while every other util concern
lives in a focused subpackage (util/common, util/crypto, util/netsafe, ...).
Move it to util/wireguard/ (package wireguard) for consistency; its only
importer, web/service/integration/warp.go, is updated. The root `util`
package no longer exists.
* refactor(sub): drop redundant sub prefix from filenames
Inside package sub the subXxx.go prefix just repeats the package name
(like client_*.go did inside service). Rename for consistency; content and
type names are unchanged:
subController.go -> controller.go
subService.go -> service.go
subClashService.go -> clash_service.go
subJsonService.go -> json_service.go
(+ matching _test.go files)
* refactor(controller): rename xui.go -> spa.go
XUIController serves the panel's single-page-app shell; spa.go names that
role plainly (the other controller files are domain-named). File rename only
— the type stays XUIController. api_docs_test.go keys route base paths by
filename, so its "xui.go" case is updated to "spa.go".
* refactor: move backend packages under internal/
Adopt the idiomatic Go application layout: the backend packages now live
under internal/ (a boundary the toolchain enforces), signalling private
implementation instead of a library-style flat root. No runtime behavior
changes — only import paths and a few build/config paths move.
Moved: config, database, logger, mtproto, sub, util, web, xray -> internal/.
main.go stays at the repo root and tools/openapigen stays under tools/ (both
still import internal/* because the internal rule keys off the module root).
The module path github.com/mhsanaei/3x-ui/v3 is unchanged; 149 .go files had
their import prefix rewritten to .../internal/<pkg>.
Couplings the Go compiler can't see, updated to the new layout:
- frontend i18n imports of web/translation (react.ts, setup.components.ts)
- vite outDir + eslint/tsconfig ignore globs -> internal/web/dist
- Dockerfile COPY paths for web/dist and web/translation
- locale.go os.DirFS("web") disk fallback -> "internal/web"
- .gitignore and ci.yml go:embed stub for internal/web/dist
- api_docs_test.go repo-root relative walk (one level deeper)
- tools/openapigen filesystem package paths; ApiTokenView repointed to the
web/service/panel subpackage and codegen regenerated (clears a stale
type the ci.yml codegen check was failing on)
Verified: go build/vet/test (all packages), and frontend typecheck, lint,
vitest (478 tests), and production build into internal/web/dist.
* fix(config): keep test runs from writing logs into the source tree
GetLogFolder() returns a CWD-relative "./log" on Windows. Under `go test`
the working directory is each package's own folder, so InitLogger (called by
tests in web/job, web/service, xray, web/websocket) created stray log/
directories scattered through the source tree (e.g. internal/web/job/log/).
Redirect to a shared temp folder when testing.Testing() reports a test run.
Production behavior is unchanged: Windows still uses ./log next to the binary
and Linux /var/log/x-ui. The log files were always gitignored (*.log) and
never committed; this just stops the noise at the source.
* docs: move subscription-template guide out of root into docs/
sub_templates/ was a top-level folder holding only a README and no actual
templates (3x-ui ships none by design), referenced nowhere and unlinked from
any doc — it read like an empty placeholder cluttering the repo root.
Move the guide to docs/custom-subscription-templates.md (a proper docs home),
reword its intro to read as documentation rather than a folder note, link it
from the Features list in README.md, and drop the empty sub_templates/ folder.
* fix: update stale web/ path references after the internal/ move
The internal/ migration rewrote Go import paths but left some references to
the old top-level layout in docs, comments, and a few runtime disk paths.
Functional (dev-mode only): the disk-serving fallbacks that read the Vite
build from disk when running from source still pointed at web/dist/, which
moved to internal/web/dist/ — so `os.DirFS`/`os.Stat`/`os.ReadFile` in
internal/web/web.go and internal/sub/{sub,controller}.go are corrected.
Production was unaffected (it serves the embedded FS; verified by the Docker
build), but `go run` with a live frontend build silently fell back to embed.
Docs/comments: frontend/README.md, CONTRIBUTING.md, the claude-issue-bot and
release workflows, the openapigen -root help text, and assorted Go comments
now reference internal/web, internal/database, internal/sub, internal/xray,
etc. Package-name mentions (the "web" package), root paths (main.go,
frontend/, install scripts, /etc/x-ui), routes (/panel/api/xray), and the
historical "web/assets no longer exists" note were intentionally left as-is.
* refactor(web): remove the legacy /xui -> /panel redirect middleware
RedirectMiddleware existed only for backward compatibility with the old
`/xui` URL scheme (301-redirecting /xui and /xui/API to /panel and
/panel/api). That cutover was long ago, so drop the middleware, its
registration in initRouter, and the now-inaccurate "URL redirection"
mention in the middleware package doc. Old /xui URLs now 404 like any other
unknown path. HTTPS auto-redirect and auth redirects are unrelated and stay.
* build: fix .dockerignore for internal/ layout and exclude runtime dir
- web/dist -> internal/web/dist: the embedded frontend moved under internal/,
so the stale exclude no longer matched and the locally-built dist could be
sent to the build context (the frontend stage rebuilds it fresh anyway).
- exclude x-ui/: the local runtime directory (SQLite db, geo .dat files, xray
binaries, certs — ~150MB) was being shipped into the build context for no
reason. Verified the pattern excludes only the directory and still keeps
x-ui.sh, which the Dockerfile copies to /usr/bin/x-ui.
2026-06-10 06:19:22 -07:00
|
|
|
"github.com/mhsanaei/3x-ui/v3/internal/web/service"
|
|
|
|
|
"github.com/mhsanaei/3x-ui/v3/internal/web/websocket"
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
|
|
|
|
|
"github.com/gin-gonic/gin"
|
2026-10-23 19:54:14 -07:00
|
|
|
"gorm.io/gorm"
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
)
|
|
|
|
|
|
|
|
|
|
func notifyClientsChanged() {
|
|
|
|
|
websocket.BroadcastInvalidate(websocket.MessageTypeClients)
|
|
|
|
|
}
|
|
|
|
|
|
2026-06-04 07:45:40 -07:00
|
|
|
func parseInboundIdsQuery(raw string) []int {
|
|
|
|
|
raw = strings.TrimSpace(raw)
|
|
|
|
|
if raw == "" {
|
|
|
|
|
return nil
|
|
|
|
|
}
|
|
|
|
|
parts := strings.Split(raw, ",")
|
|
|
|
|
ids := make([]int, 0, len(parts))
|
|
|
|
|
for _, p := range parts {
|
|
|
|
|
if id, err := strconv.Atoi(strings.TrimSpace(p)); err == nil {
|
|
|
|
|
ids = append(ids, id)
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
return ids
|
|
|
|
|
}
|
|
|
|
|
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
type ClientController struct {
|
|
|
|
|
clientService service.ClientService
|
|
|
|
|
inboundService service.InboundService
|
|
|
|
|
xrayService service.XrayService
|
Reduce list-page payloads with slim/paged endpoints (#4500)
* perf(inbounds): slim list payload + lazy hydrate for row actions
Adds GET /panel/api/inbounds/list/slim that returns the same list shape
but strips every per-client field besides email/enable/comment from
settings.clients[] and skips UUID/SubId enrichment on ClientStats.
The inbounds page only reads those three to compute its client counters
and badges, so the slim variant trims tens of bytes per client (uuid,
password, flow, security, totalGB, expiryTime, limitIp, tgId, ...).
On a panel with thousands of clients this is the dominant load-time
cost.
Detail flows (edit / info / qr / export / clone) call /get/:id through
a new hydrateInbound helper before opening — the slim list view never
needs the secrets it doesn't render.
* perf(clients): server-side pagination + slim row payload
Adds GET /panel/api/clients/list/paged that filters, sorts, and paginates
on the server, returns a slim row shape (drops uuid/password/auth/flow/
security/reverse/tgId per client), and includes a stable summary
(total, active, online[], depleted[], expiring[], deactive[]) computed
across the full DB row set so the dashboard cards don't change as the
user paginates or filters. Page size capped at 200.
useClients now exposes { clients (current page), total, filtered, query,
setQuery, summary, hydrate }. ClientsPage feeds its filter/sort/page
state into setQuery via a single effect, debounces search by 300ms, and
hydrates the full client record via /get/:email before opening edit/info/
qr modals. Local filter/sort logic and the all-clients summary memo are
gone.
On a 2000-client panel this turns the initial response from ~MB to ~25 row
slice (~10s of KB) and removes the all-client parse cost from every
refresh.
* perf(settings): use /inbounds/options for LDAP tag picker
The General settings tab only needs each inbound's tag/protocol/port to
fill a dropdown but was calling /panel/api/inbounds/list which ships the
full settings JSON with every embedded client. Switched it to /options
and added Tag to the projection. On a panel with thousands of clients
this drops the General-tab load payload from megabytes to a tiny
per-inbound row each.
* perf(clients): de-duplicate options + paged list fetches
Two issues caused each clients-page load to fire its requests twice:
1. setQuery in the hook took whatever object the consumer passed and
stored it as-is. The consumer (ClientsPage) constructs a new object
literal in an effect, so even when nothing actually changed the ref
was new — the hook's useEffect saw a new query and re-fetched.
Wrapped setQuery with a shallow value compare so identical params
are a no-op.
2. The picker /inbounds/options fetch was bundled into refresh() with a
length==0 guard, but the two back-to-back refreshes both saw an
empty inbounds array (the first hadn't resolved yet) so both fired
the request. Moved the options fetch into its own one-shot effect.
* perf(inbounds): share nodes list with form modal instead of refetching
InboundsPage and InboundFormModal both called useNodes() — each
instance maintains its own state and fires its own /panel/api/nodes/list
fetch on mount. Since the modal is always rendered (open or not), every
page load hit the endpoint twice.
Threaded nodes from the page through an availableNodes prop on the form
modal so they share one fetch.
* docs(api): register /clients/list/paged endpoint
TestAPIRoutesDocumented was failing because the new paginated clients
endpoint added in this branch wasn't listed in endpoints.js.
2026-05-23 08:43:43 -07:00
|
|
|
settingService service.SettingService
|
feat(happ): generate Crypt5 subscription links locally (#6494)
* feat(clients): add stateless Happ link generator
Generate Happ provider links from the current effective subscription source without caching results. Reject unsafe provider responses and redact failure diagnostics.
* fix(clients): reject duplicate Happ provider fields
Parse Happ provider objects token by token so duplicate supported keys cannot be silently overwritten by encoding/json.
* feat(clients): expose on-demand Happ link API
Expose a no-store client endpoint backed by the Happ link generator and keep its generated OpenAPI contract synchronized.
* fix(openapi): exclude service interfaces from generated types
Keep dependency-injection interfaces out of the frontend API surface while preserving allowed response schemas.
* feat(clients): add stateless Happ QR presentation
Generate Happ links only for the active modal scope and retire late responses so Standard remains immediately available. Add focused component coverage and localized retry guidance across every locale.
* fix(clients): cover overlapping Happ generations
Prove the cancellation cleanup is required by resolving a retired request while its replacement remains pending. Also wait for Regenerate to leave loading state before exercising the existing action.
* fix(clients): harden Happ link handling
Validate generated responses before rendering and hide actions during unresolved requests. Strengthen route, redirect, timeout, and lint regression coverage with mutation-sensitive tests.
* fix(clients): gate Happ link generation behind operator opt-in
- add a fail-closed happLinkEnable setting
- enforce the gate before and after provider requests
- add locked Happ QR state with privacy disclosure and settings link
- cover backend, frontend, settings, and i18n regressions
* fix(frontend): guard oversized Happ QR codes
Keep valid long crypt5 links copyable while suppressing QR rendering and image actions above the encoder's UTF-8 byte limit. Add localized guidance and boundary coverage.
* fix(clients): log the sanitized transport error for Happ link failures
Every fail() call in HappService.Generate passed a string literal as the
detail, so the sanitizer written for provider errors only ever saw
constants, and an operator following the QR modal's "check Logs" hint
found nothing beyond reason=transport. Transport and body-read errors now
flow through sanitizeHappDetail, which also redacts cookie/session pairs.
Drop TestHappLinkEnableDefaultsOffWithoutPersistingRow: it pinned a getter
and its constant default, which the Generate gate test already drives.
* fix(frontend): size the Happ QR cap to level L and keep the QR modal mounted on close
HAPP_QR_MAX_BYTES was the level-M capacity (2331) while QrPanel encodes at
errorLevel "L", whose version-40 byte-mode capacity is 2953, so valid links
between 2332 and 2953 bytes lost their QR. The cap now matches the encoder
and a test renders the real QrPanel at the boundary.
Keying the modal content on `open` remounted it on every close, which cut
the Modal's exit transition and made the openSubId sync unreachable, so
`loading` never turned on for the subLinks fetch and a client without a
subscription link flashed noLinks on reopen. `open` leaves the key and the
sync block now also resets the Happ state.
* chore(clients): request Happ crypt5 links from api-v3
crypto.happ.su serves api-v2.php and api-v3.php side by side. Probed with
the same payloads, both take {"url"} over a JSON POST, answer
{"encrypted_link":"happ://crypt5/..."} of identical length with the same
crypt5 key marker, and fail the same way: 400 "No url provided.",
500 "Invalid URL format.", 405 on GET. Happ's own generator page is
branded "URL Encryption v3", so the panel follows it. The parser and the
link validator are unchanged.
* feat: add local generation of encrypted Happ links
- Implemented functionality to generate encrypted Happ links locally without network dependency.
- Added validation for URL length and format to ensure compliance with processing limits.
- Introduced new error handling for invalid URLs and control characters.
- Updated translations for various languages to reflect changes in Happ link generation.
- Created unit tests to validate the encryption process and ensure session keys and nonces are unique.
* fix(frontend): match the tuic memo deps to the non-optional subSettings
The Happ branch reads subSettings non-optionally in ClientQrModalContent
(happLinkEnable and the WireGuard/AmneziaWG publicHost memos), so React
Compiler infers subSettings.publicHost. The TUIC memo merged in from main
still listed subSettings?.publicHost, which fails oxlint's
preserve-manual-memoization rule and makes the compiler skip optimizing
the component. make verify stopped at lint-fe on the branch head.
* chore(happ): trim the pinned-key provenance comment to two lines
CLAUDE.md caps a comment block at two lines. The bare URL line repeated
the repository and file the next line already names, so it is folded
into that line (review LOW on happ_crypto.go).
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
2026-09-13 03:44:55 -07:00
|
|
|
happGenerator service.HappLinkGenerator
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func NewClientController(g *gin.RouterGroup) *ClientController {
|
|
|
|
|
a := &ClientController{}
|
feat(happ): generate Crypt5 subscription links locally (#6494)
* feat(clients): add stateless Happ link generator
Generate Happ provider links from the current effective subscription source without caching results. Reject unsafe provider responses and redact failure diagnostics.
* fix(clients): reject duplicate Happ provider fields
Parse Happ provider objects token by token so duplicate supported keys cannot be silently overwritten by encoding/json.
* feat(clients): expose on-demand Happ link API
Expose a no-store client endpoint backed by the Happ link generator and keep its generated OpenAPI contract synchronized.
* fix(openapi): exclude service interfaces from generated types
Keep dependency-injection interfaces out of the frontend API surface while preserving allowed response schemas.
* feat(clients): add stateless Happ QR presentation
Generate Happ links only for the active modal scope and retire late responses so Standard remains immediately available. Add focused component coverage and localized retry guidance across every locale.
* fix(clients): cover overlapping Happ generations
Prove the cancellation cleanup is required by resolving a retired request while its replacement remains pending. Also wait for Regenerate to leave loading state before exercising the existing action.
* fix(clients): harden Happ link handling
Validate generated responses before rendering and hide actions during unresolved requests. Strengthen route, redirect, timeout, and lint regression coverage with mutation-sensitive tests.
* fix(clients): gate Happ link generation behind operator opt-in
- add a fail-closed happLinkEnable setting
- enforce the gate before and after provider requests
- add locked Happ QR state with privacy disclosure and settings link
- cover backend, frontend, settings, and i18n regressions
* fix(frontend): guard oversized Happ QR codes
Keep valid long crypt5 links copyable while suppressing QR rendering and image actions above the encoder's UTF-8 byte limit. Add localized guidance and boundary coverage.
* fix(clients): log the sanitized transport error for Happ link failures
Every fail() call in HappService.Generate passed a string literal as the
detail, so the sanitizer written for provider errors only ever saw
constants, and an operator following the QR modal's "check Logs" hint
found nothing beyond reason=transport. Transport and body-read errors now
flow through sanitizeHappDetail, which also redacts cookie/session pairs.
Drop TestHappLinkEnableDefaultsOffWithoutPersistingRow: it pinned a getter
and its constant default, which the Generate gate test already drives.
* fix(frontend): size the Happ QR cap to level L and keep the QR modal mounted on close
HAPP_QR_MAX_BYTES was the level-M capacity (2331) while QrPanel encodes at
errorLevel "L", whose version-40 byte-mode capacity is 2953, so valid links
between 2332 and 2953 bytes lost their QR. The cap now matches the encoder
and a test renders the real QrPanel at the boundary.
Keying the modal content on `open` remounted it on every close, which cut
the Modal's exit transition and made the openSubId sync unreachable, so
`loading` never turned on for the subLinks fetch and a client without a
subscription link flashed noLinks on reopen. `open` leaves the key and the
sync block now also resets the Happ state.
* chore(clients): request Happ crypt5 links from api-v3
crypto.happ.su serves api-v2.php and api-v3.php side by side. Probed with
the same payloads, both take {"url"} over a JSON POST, answer
{"encrypted_link":"happ://crypt5/..."} of identical length with the same
crypt5 key marker, and fail the same way: 400 "No url provided.",
500 "Invalid URL format.", 405 on GET. Happ's own generator page is
branded "URL Encryption v3", so the panel follows it. The parser and the
link validator are unchanged.
* feat: add local generation of encrypted Happ links
- Implemented functionality to generate encrypted Happ links locally without network dependency.
- Added validation for URL length and format to ensure compliance with processing limits.
- Introduced new error handling for invalid URLs and control characters.
- Updated translations for various languages to reflect changes in Happ link generation.
- Created unit tests to validate the encryption process and ensure session keys and nonces are unique.
* fix(frontend): match the tuic memo deps to the non-optional subSettings
The Happ branch reads subSettings non-optionally in ClientQrModalContent
(happLinkEnable and the WireGuard/AmneziaWG publicHost memos), so React
Compiler infers subSettings.publicHost. The TUIC memo merged in from main
still listed subSettings?.publicHost, which fails oxlint's
preserve-manual-memoization rule and makes the compiler skip optimizing
the component. make verify stopped at lint-fe on the branch head.
* chore(happ): trim the pinned-key provenance comment to two lines
CLAUDE.md caps a comment block at two lines. The bare URL line repeated
the repository and file the next line already names, so it is folded
into that line (review LOW on happ_crypto.go).
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
2026-09-13 03:44:55 -07:00
|
|
|
a.happGenerator = service.NewHappService(&a.clientService, &a.settingService)
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
a.initRouter(g)
|
|
|
|
|
return a
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) initRouter(g *gin.RouterGroup) {
|
|
|
|
|
g.GET("/list", a.list)
|
Reduce list-page payloads with slim/paged endpoints (#4500)
* perf(inbounds): slim list payload + lazy hydrate for row actions
Adds GET /panel/api/inbounds/list/slim that returns the same list shape
but strips every per-client field besides email/enable/comment from
settings.clients[] and skips UUID/SubId enrichment on ClientStats.
The inbounds page only reads those three to compute its client counters
and badges, so the slim variant trims tens of bytes per client (uuid,
password, flow, security, totalGB, expiryTime, limitIp, tgId, ...).
On a panel with thousands of clients this is the dominant load-time
cost.
Detail flows (edit / info / qr / export / clone) call /get/:id through
a new hydrateInbound helper before opening — the slim list view never
needs the secrets it doesn't render.
* perf(clients): server-side pagination + slim row payload
Adds GET /panel/api/clients/list/paged that filters, sorts, and paginates
on the server, returns a slim row shape (drops uuid/password/auth/flow/
security/reverse/tgId per client), and includes a stable summary
(total, active, online[], depleted[], expiring[], deactive[]) computed
across the full DB row set so the dashboard cards don't change as the
user paginates or filters. Page size capped at 200.
useClients now exposes { clients (current page), total, filtered, query,
setQuery, summary, hydrate }. ClientsPage feeds its filter/sort/page
state into setQuery via a single effect, debounces search by 300ms, and
hydrates the full client record via /get/:email before opening edit/info/
qr modals. Local filter/sort logic and the all-clients summary memo are
gone.
On a 2000-client panel this turns the initial response from ~MB to ~25 row
slice (~10s of KB) and removes the all-client parse cost from every
refresh.
* perf(settings): use /inbounds/options for LDAP tag picker
The General settings tab only needs each inbound's tag/protocol/port to
fill a dropdown but was calling /panel/api/inbounds/list which ships the
full settings JSON with every embedded client. Switched it to /options
and added Tag to the projection. On a panel with thousands of clients
this drops the General-tab load payload from megabytes to a tiny
per-inbound row each.
* perf(clients): de-duplicate options + paged list fetches
Two issues caused each clients-page load to fire its requests twice:
1. setQuery in the hook took whatever object the consumer passed and
stored it as-is. The consumer (ClientsPage) constructs a new object
literal in an effect, so even when nothing actually changed the ref
was new — the hook's useEffect saw a new query and re-fetched.
Wrapped setQuery with a shallow value compare so identical params
are a no-op.
2. The picker /inbounds/options fetch was bundled into refresh() with a
length==0 guard, but the two back-to-back refreshes both saw an
empty inbounds array (the first hadn't resolved yet) so both fired
the request. Moved the options fetch into its own one-shot effect.
* perf(inbounds): share nodes list with form modal instead of refetching
InboundsPage and InboundFormModal both called useNodes() — each
instance maintains its own state and fires its own /panel/api/nodes/list
fetch on mount. Since the modal is always rendered (open or not), every
page load hit the endpoint twice.
Threaded nodes from the page through an availableNodes prop on the form
modal so they share one fetch.
* docs(api): register /clients/list/paged endpoint
TestAPIRoutesDocumented was failing because the new paginated clients
endpoint added in this branch wasn't listed in endpoints.js.
2026-05-23 08:43:43 -07:00
|
|
|
g.GET("/list/paged", a.listPaged)
|
2026-11-05 09:02:39 -08:00
|
|
|
g.GET("/get", a.get)
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
g.GET("/get/:email", a.get)
|
2026-10-23 19:54:14 -07:00
|
|
|
g.GET("/get/subId/:subId", a.getBySubId)
|
feat(api): add GET endpoint to look up clients by Telegram ID (#5945)
* feat(api): add GET endpoint to look up clients by Telegram ID
GET /panel/api/clients/getByTgId/:tgId returns all clients matching the given Telegram user ID. tgId is not unique, so the response is an array of {client, inboundIds, externalLinks, usedTraffic} objects.
* fix: guard tgId=0 sentinel, index tg_id, deduplicate enrichment in getByTgId
Three issues from the code review on the new GET /panel/api/clients/getByTgId/:tgId
endpoint: the lookup did not short-circuit tgId <= 0 (this codebase's sentinel
for 'no Telegram ID'), had no index on clients.tg_id causing a full table scan
on every call, and duplicated the per-record enrichment (inbound IDs, external
links, effective flow, traffic) identically between get and getByTgId.
- Reject tgId <= 0 in GetRecordsByTgId with a clear error, matching the
'0 = none' convention used elsewhere in the codebase.
- Add index:idx_clients_tg_id to ClientRecord.TgID (struct tag + idempotent
startup migration for existing databases).
- Extract buildClientPayload helper used by both get and getByTgId.
- Update client_lookup_test.go to verify sentinel rejection instead of
expecting tgId=0 to be a valid lookup.
* refactor(api): move Telegram client lookup under /get/tgId/:tgId
Nest the Telegram-ID lookup beside the email lookup as /get/tgId/:tgId
instead of the flat /getByTgId/:tgId, so both client fetch routes share the
/get prefix. Gin resolves the static tgId segment ahead of the :email
wildcard, so /get/:email keeps matching plain email lookups, including a
literal 'tgId' email. The endpoint is unreleased, so no compatibility
concern.
2026-07-28 13:38:44 -07:00
|
|
|
g.GET("/get/tgId/:tgId", a.getByTgId)
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
g.GET("/traffic/:email", a.getTrafficByEmail)
|
|
|
|
|
g.GET("/subLinks/:subId", a.getSubLinks)
|
|
|
|
|
g.GET("/links/:email", a.getClientLinks)
|
feat(happ): generate Crypt5 subscription links locally (#6494)
* feat(clients): add stateless Happ link generator
Generate Happ provider links from the current effective subscription source without caching results. Reject unsafe provider responses and redact failure diagnostics.
* fix(clients): reject duplicate Happ provider fields
Parse Happ provider objects token by token so duplicate supported keys cannot be silently overwritten by encoding/json.
* feat(clients): expose on-demand Happ link API
Expose a no-store client endpoint backed by the Happ link generator and keep its generated OpenAPI contract synchronized.
* fix(openapi): exclude service interfaces from generated types
Keep dependency-injection interfaces out of the frontend API surface while preserving allowed response schemas.
* feat(clients): add stateless Happ QR presentation
Generate Happ links only for the active modal scope and retire late responses so Standard remains immediately available. Add focused component coverage and localized retry guidance across every locale.
* fix(clients): cover overlapping Happ generations
Prove the cancellation cleanup is required by resolving a retired request while its replacement remains pending. Also wait for Regenerate to leave loading state before exercising the existing action.
* fix(clients): harden Happ link handling
Validate generated responses before rendering and hide actions during unresolved requests. Strengthen route, redirect, timeout, and lint regression coverage with mutation-sensitive tests.
* fix(clients): gate Happ link generation behind operator opt-in
- add a fail-closed happLinkEnable setting
- enforce the gate before and after provider requests
- add locked Happ QR state with privacy disclosure and settings link
- cover backend, frontend, settings, and i18n regressions
* fix(frontend): guard oversized Happ QR codes
Keep valid long crypt5 links copyable while suppressing QR rendering and image actions above the encoder's UTF-8 byte limit. Add localized guidance and boundary coverage.
* fix(clients): log the sanitized transport error for Happ link failures
Every fail() call in HappService.Generate passed a string literal as the
detail, so the sanitizer written for provider errors only ever saw
constants, and an operator following the QR modal's "check Logs" hint
found nothing beyond reason=transport. Transport and body-read errors now
flow through sanitizeHappDetail, which also redacts cookie/session pairs.
Drop TestHappLinkEnableDefaultsOffWithoutPersistingRow: it pinned a getter
and its constant default, which the Generate gate test already drives.
* fix(frontend): size the Happ QR cap to level L and keep the QR modal mounted on close
HAPP_QR_MAX_BYTES was the level-M capacity (2331) while QrPanel encodes at
errorLevel "L", whose version-40 byte-mode capacity is 2953, so valid links
between 2332 and 2953 bytes lost their QR. The cap now matches the encoder
and a test renders the real QrPanel at the boundary.
Keying the modal content on `open` remounted it on every close, which cut
the Modal's exit transition and made the openSubId sync unreachable, so
`loading` never turned on for the subLinks fetch and a client without a
subscription link flashed noLinks on reopen. `open` leaves the key and the
sync block now also resets the Happ state.
* chore(clients): request Happ crypt5 links from api-v3
crypto.happ.su serves api-v2.php and api-v3.php side by side. Probed with
the same payloads, both take {"url"} over a JSON POST, answer
{"encrypted_link":"happ://crypt5/..."} of identical length with the same
crypt5 key marker, and fail the same way: 400 "No url provided.",
500 "Invalid URL format.", 405 on GET. Happ's own generator page is
branded "URL Encryption v3", so the panel follows it. The parser and the
link validator are unchanged.
* feat: add local generation of encrypted Happ links
- Implemented functionality to generate encrypted Happ links locally without network dependency.
- Added validation for URL length and format to ensure compliance with processing limits.
- Introduced new error handling for invalid URLs and control characters.
- Updated translations for various languages to reflect changes in Happ link generation.
- Created unit tests to validate the encryption process and ensure session keys and nonces are unique.
* fix(frontend): match the tuic memo deps to the non-optional subSettings
The Happ branch reads subSettings non-optionally in ClientQrModalContent
(happLinkEnable and the WireGuard/AmneziaWG publicHost memos), so React
Compiler infers subSettings.publicHost. The TUIC memo merged in from main
still listed subSettings?.publicHost, which fails oxlint's
preserve-manual-memoization rule and makes the compiler skip optimizing
the component. make verify stopped at lint-fe on the branch head.
* chore(happ): trim the pinned-key provenance comment to two lines
CLAUDE.md caps a comment block at two lines. The bare URL line repeated
the repository and file the next line already names, so it is folded
into that line (review LOW on happ_crypto.go).
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
2026-09-13 03:44:55 -07:00
|
|
|
g.POST("/happLink/:id", a.generateHappLink)
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
|
|
|
|
|
g.POST("/add", a.create)
|
feat(clients): add calendar weekly renewal and schedule previews (#6524)
* feat(clients): add calendar weekly renewal and schedule previews
Expose fixed-day, calendar-weekly, calendar-monthly, and disabled renewal
through one shared selector in individual and bulk client forms. Store the
weekly weekday separately (Monday 1 through Sunday 7) and use panel-local
calendar dates rather than a fixed 168-hour duration. Resolve skipped or
repeated midnights to the first valid instant of the selected date, and skip
an entirely nonexistent calendar date rather than changing the weekday.
Reuse the existing renewal writer and share its boundary alignment and
per-period catch-up calculation with an authenticated, read-only preview.
Keep monthly precedence for legacy records, fixed-day interval semantics,
maximum renewal allowances, first-use durations, and operator-disabled
settings unchanged. Selecting a mode does not rewrite an existing cutoff;
an unset calendar cutoff requires an explicit action to choose the first.
The last-valid-second preview uses the stored exclusive expiry, even when
the billing calculation aligns a legacy last-second cutoff up to midnight.
Carry weekly schedules through client persistence, paging, enable toggles,
inbound settings, and node traffic reconciliation. Migrate missing or nullable
weekday columns to disabled by default without altering existing limits, and
include the new isolated-schema PostgreSQL regression in the live CI gate.
Regenerate API contracts and reference documentation, add lifecycle and form
regressions, and document timezone, quota-reset, and upgrade considerations.
All participating nodes must be upgraded before weekly mode is enabled;
older binaries ignore the new field. Independent periodic traffic resets and
the optional month-end subscription-header display are not changed.
* fix(clients): validate renewal schedules across inbound write paths
Reject conflicting weekly/interval/monthly schedules and out-of-range
weekdays on inbound creation and edits, legacy one-client apply paths,
record/link synchronization, and traffic metadata writes. Validate imported
traffic snapshots as well, before any inbound or client is persisted, so
an inbound API cannot create a client that the clients page cannot toggle.
Merge a weekly-related schedule as one timestamp-selected tuple rather
than filling its zero fields from another renewal mode. Preserve empty
migration snapshots and the existing non-weekly monthly/interval merge
semantics. Renewal caps, counters, credentials, and deadlines are unchanged.
Add regressions for nine write paths, unchanged records and runtime calls
after rejection, valid inbound clients remaining editable, and duplicate
record merges between individually valid renewal modes.
* docs(clients): clarify depleted-client deletion risks on downgrade
Explain in English and Chinese that older versions not only stop weekly
renewal: their depleted-client cleanup can delete a weekly-only client once
its expiry or quota is exhausted. This is conditional on cleanup, not an
automatic deletion caused by downgrade itself.
Recommend backing up and converting weekly schedules to a mode supported
by every participating version before rollback, and avoiding cleanup while
mixed versions or unconverted clients remain. Merely disabling weekly
renewal does not restore the old binary's missing purge protection.
* fix(clients): bound weekly renewal date searches
Limit the search for a valid weekly calendar date to eight candidates so
an unusual timezone cannot monopolize the single traffic writer. Exhaustion
returns the original instant, allowing the existing catch-up forward-progress
guard to stop without advancing expiry, consuming an allowance, resetting
traffic, or falling back to a fixed-duration schedule that can drift.
Reject a non-future calendar suggestion in the read-only preview instead of
offering an immediately expired initial cutoff. Also report failed weekly
catch-up as a search error when allowances remain, not as cap exhaustion.
Existing preview errors use the form's current warning; no API schema or
locale changes are needed.
Exercise exhaustion with a synthetic valid TZif containing twelve skipped
Sundays. This fault-injection case was red without the bound; it is not a
claim that a production IANA timezone was observed hanging. Keep the Havana
and Apia regressions for real skipped/repeated midnights and absent dates.
* fix(tests): isolate weekly renewal preview timezone
Stop the weekly search regression from replacing process-global time.Local.
CI caught that assignment and its cleanup racing with background timer reads
through time.Now, even though the top-level tests do not use t.Parallel.
Pass the timezone and current instant into the unchanged preview calculation.
The public service still validates the request and resolves the panel timezone;
API responses, renewal accounting, and persisted client data are unchanged.
Use fixed dates for both suggestion and catch-up exhaustion, removing the
test's dependency on today's date and its unnecessary database setup. Keep a
bounded-lifetime background clock reader to expose future global-timezone
mutations under the existing race gate rather than disabling that check.
* ci: retrigger PR checks
Create an empty commit to request a fresh pull-request CI run after release dependency downloads failed with network errors.
No source, dependency, or workflow changes are included. Retry the existing checks without bypassing them.
* ci: retry PR checks and record deferred download hardening
Request another CI run after the amd64 release job compiled successfully but failed during dependency fetching with exit code 4 (network failure).
Record possible follow-up improvements for the Linux release fetch helper:
- Print each download URL and destination, and preserve error details.
- Reuse the existing curl configuration with up to five retries; add connection and per-attempt timeouts and a bounded retry window.
- Download to a temporary file and promote it to the final filename only after a successful, non-empty transfer. Keep the job failing if downloads ultimately fail.
- Validate successful downloads, recovery after a temporary failure, and correct failure after persistent errors before shipping such a change.
These improvements are intentionally deferred, not implemented or tested by this commit. This commit is empty: renewal logic, dependencies, workflow configuration, check requirements, and TLS verification remain unchanged.
---------
Co-authored-by: JacktheRanger <219502738+JacktheRanger@users.noreply.github.com>
2026-09-26 13:59:23 -07:00
|
|
|
g.POST("/renewalPreview", a.renewalPreview)
|
2026-11-05 09:02:39 -08:00
|
|
|
g.POST("/update", a.update)
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
g.POST("/update/:email", a.update)
|
2026-11-05 09:02:39 -08:00
|
|
|
g.POST("/del", a.delete)
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
g.POST("/del/:email", a.delete)
|
|
|
|
|
g.POST("/:email/attach", a.attach)
|
|
|
|
|
g.POST("/:email/detach", a.detach)
|
2026-06-14 11:57:14 -07:00
|
|
|
g.POST("/:email/externalLinks", a.setExternalLinks)
|
2026-06-21 14:06:10 -07:00
|
|
|
g.GET("/export", a.export)
|
|
|
|
|
g.POST("/import", a.importClients)
|
|
|
|
|
g.POST("/delOrphans", a.delOrphans)
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
g.POST("/resetAllTraffics", a.resetAllTraffics)
|
|
|
|
|
g.POST("/delDepleted", a.delDepleted)
|
2026-05-23 07:27:20 -07:00
|
|
|
g.POST("/bulkAdjust", a.bulkAdjust)
|
2026-06-25 10:21:42 -07:00
|
|
|
g.POST("/bulkEnable", a.bulkEnable)
|
|
|
|
|
g.POST("/bulkDisable", a.bulkDisable)
|
feat: complete Zod migration of frontend + bulk client batching (#4599)
* feat(frontend): add Zod runtime validation at API boundary
Introduces Zod 4 schemas for response validation on the three highest-traffic
endpoints (server/status, nodes/list, setting/all) and a Zod->AntD form rule
adapter, replacing the duplicated per-file ApiMsg<T> interfaces. Validation
runs safeParse with console.warn + raw-payload fallback so backend drift never
breaks the UI for users.
Login form switches to schema-driven rules as the proof-of-life for the
adapter. Class-based models stay untouched; remaining query/mutation hooks
and form modals will migrate in follow-ups.
* feat(frontend): extend Zod validation to remaining query/mutation hooks
Adds Zod schemas for client/inbound/xray/node-probe endpoints and wires
useNodeMutations, useClients, useInbounds, useXraySetting, useDatepicker
through parseMsg. Drops the duplicated per-file ApiMsg<T> interfaces and
the local ClientRecord / OutboundTrafficRow / XraySettingsValue / DefaultsPayload
declarations in favour of schema-inferred types re-exported from the
new src/schemas/ modules.
API boundary now validates: clients list/paged, clients onlines,
clients lastOnline, clients get/hydrate, inbounds slim, inbounds get,
inbounds options, defaultSettings, xray config, xray outbounds traffic,
xray testOutbound, xray getXrayResult, getDefaultJsonConfig, nodes probe,
nodes test. Mutation responses that consume obj (bulkAdjust, delDepleted,
nodes probe / test) get response validation; pass-through mutations stay
agnostic. NodeFormModal type-aligned to Msg<ProbeResult>.
* fix(frontend): allow null slices in client/summary schemas
Go's encoding/json emits nil []T as null, not []. The initial
ClientPageResponseSchema and ClientHydrateSchema rejected null
inboundIds / summary.online / summary.depleted / etc., causing
[zod] warnings on every empty list.
Add nullableStringArray / nullableNumberArray helpers that accept
null and transform to [] so consuming code keeps seeing arrays.
Mark ClientRecord.traffic and .reverse nullable too (reverse is
explicitly null in MarshalJSON when storage is empty).
* fix(vite): treat /panel/xray as SPA page, not API root
The dev-server bypass classified /panel/xray as an API path because
the PANEL_API_PREFIXES matcher did `stripped === prefix.replace(/\/$/, '')`,
which made the bare path collide with the SPA route of the same name
(see web/controller/xui.go: g.GET("/xray", a.panelSPA)).
On reload, /panel/xray got proxied to the Go backend instead of being
served by Vite. The backend returned the embedded built index.html
with hashed asset names that the dev server doesn't have, so every
asset 404'd.
Prefix-only match for trailing-slash entries fixes it: panel/xray/...
still routes to the API, but panel/xray itself reaches the SPA branch.
* feat(frontend): drive form validation from Zod schemas
NodeFormModal — full conversion to AntD Form.useForm with antdRule
on every required field. Inline field errors replace the single
'fillRequired' toast. testConnection now runs validateFields(['address','port'])
before sending.
ClientFormModal and ClientBulkAddModal — minimal conversion: keep the
existing useState-driven controlled-component pattern, but replace the
hand-rolled `if (!form.x)` checks with schema.safeParse(form). The
schema is the single source of truth for required-ness and types;
ClientCreateFormSchema layers on the create-only `inboundIds.min(1)` rule.
New schemas (in src/schemas/):
NodeFormSchema (node.ts)
ClientFormSchema / ClientCreateFormSchema (client.ts)
ClientBulkAddFormSchema (client.ts)
Other 16+ form modals stay on the current pattern — the antdRule adapter
ships from the first Zod pass for opportunistic migration as forms are
touched.
* chore(frontend): silence swagger-ui-react peer-dep warnings on React 19
swagger-ui-react@5.32.6 bundles three deps whose declared peer ranges
predate React 19:
react-copy-to-clipboard@5.1.0 (peer 15-18)
react-debounce-input@3.3.0 (peer 15-18, unmaintained)
react-inspector@6.0.2 (peer 16-18)
For the first two, the actual code is React-19 compatible - only the
metadata is stale. Resolve via npm overrides:
- react-copy-to-clipboard bumped to ^5.1.1 (peer is open-ended >=15.3.0
in that release).
- react-inspector bumped to ^9.0.0 (^8 was a broken publish per its own
deprecation notice).
- react-debounce-input is wedged on 3.3.0 with no maintained successor
on npm. Use the nested-override syntax to satisfy its react peer:
"react-debounce-input": { "react": "^19.0.0" }
That tells npm to use our React 19 for the package's peer dependency,
which silences the warning without changing the package version.
* fix(vite): bypass es-toolkit CJS shim for recharts deep imports
The Nodes page (and any other recharts-using route) crashed in dev and
prod with TypeError: require_isUnsafeProperty is not a function.
Root cause: es-toolkit's package.json exports './compat/*' only via a
default condition pointing at the CJS shims under compat/<name>.js.
Those shims use a require_X.Y access pattern that Vite's optimizer
(Rolldown in Vite 8) and the production Rolldown build both mishandle,
losing the named-export accessor and calling the namespace object as
a function. recharts imports a dozen of these subpaths with default-
import syntax, so every chart path tripped the bug.
The matching ESM build at dist/compat/<category>/<name>.mjs is fine,
but it only carries a named export. Recharts uses default imports.
Plug a small Rollup-compatible plugin (enforce: 'pre') in front of
the resolver: any 'es-toolkit/compat/<name>' request becomes a virtual
module that imports the named symbol from the right .mjs file and
re-exports it as both default and named. The plugin is registered as
a top-level plugin (for the prod build) and via the new Vite 8
optimizeDeps.rolldownOptions.plugins (for the dev pre-bundler), so
both pipelines pick it up consistently.
* feat(frontend): migrate five secondary form modals to Zod schemas
Apply the schema + safeParse-on-submit pattern (introduced for
ClientFormModal / ClientBulkAddModal) to five more forms:
- ClientBulkAdjustModal: ClientBulkAdjustFormSchema enforces 'at least
one of addDays / addGB is non-zero' via .refine(), replacing the
ad-hoc days+gb check.
- BalancerFormModal: BalancerFormSchema covers tag and selector
required-ness; the duplicate-tag check stays inline since it needs
the otherTags prop. Per-field validateStatus now reads from the
parsed issues map.
- RuleFormModal: RuleFormSchema captures the form shape (no required
fields - every property is optional by design). safeParse short-
circuits if anything is structurally wrong.
- CustomGeoFormModal: CustomGeoFormSchema folds the regex alias rule
and the http(s) URL validation (including URL parse) into the
schema, replacing a 20-line validate() function.
- TwoFactorModal: TotpCodeSchema (z.string().regex(/^\d{6}$/)) drives
both the disabled-state of the OK button and the safeParse gate
before the TOTP comparison.
Schemas live alongside the matching API schemas:
- ClientBulkAdjustFormSchema in schemas/client.ts
- BalancerFormSchema / RuleFormSchema / CustomGeoFormSchema in schemas/xray.ts
- TotpCodeSchema in schemas/login.ts (next to LoginFormSchema)
No UX change for valid inputs.
* feat(frontend): block invalid settings saves with Zod pre-save check
Tighten AllSettingSchema with the actual valid ranges and patterns:
- webPort / subPort / ldapPort: integer 1-65535
- pageSize: integer 1-1000
- sessionMaxAge: integer >= 1
- tgCpu: integer 0-100 (percentage)
- subUpdates: integer 1-168 (hours)
- expireDiff / trafficDiff / ldapDefault*: non-negative integers
- webBasePath / subPath / subJsonPath / subClashPath: must start with /
The existing useAllSettings save path runs AllSettingSchema.partial()
through safeParse and logs drift without blocking. SettingsPage now
adds a stronger gate before the mutation: run the full schema against
the draft and, on failure, surface the first issue (field path +
message) via the existing messageApi.error so the user actually sees
what's wrong instead of silently sending bad data to the backend.
Use cases caught: port out of range, negative quota, sub path missing
leading slash, page size set to 0, tgCpu > 100.
* feat(frontend): schema-guard Inbound and Outbound form submits
The two largest forms in the panel send to the backend without ever
checking their own port range or required-ness. Schema-gate the
top-level fields so obviously bad payloads stop at the client.
InboundFormModal: InboundFormSchema (port 1-65535 int, non-empty
protocol, the rest of the keys present) runs as a safeParse just
before the HttpUtil.post in submit(). The 2000+ lines of protocol-
specific subform code stay untouched - that's a separate effort and
the existing per-protocol logic (e.g. canEnableStream, isFallbackHost)
already gates most of the structural correctness.
OutboundFormModal: OutboundTagSchema (trim + min 1) replaces the
hand-rolled `if (!ob.tag?.trim()) messageApi.error('Tag is required')`
check. The duplicateTag check stays inline because it needs the
existingTags prop.
Both schemas emit i18n keys for messages with a defaultValue fallback,
matching the pattern in BalancerFormModal and SettingsPage.
* feat(backend): gate request bodies with go-playground/validator
Add a generic BindAndValidate helper in web/middleware that wraps gin's
content-aware binder with an explicit validator.Struct call and emits a
structured `entity.Msg{Obj: ValidationPayload{Issues...}}` on failure so
the frontend can map each issue to an i18n key.
Tag the user-facing fields on model.Inbound, model.Node, and
entity.AllSetting with the range/enum constraints they were previously
relying on hand-rolled CheckValid logic (or nothing) to enforce, and
wire the helper into the inbound/node/settings controllers that bind
those structs directly. Promotes validator/v10 from indirect to direct
require, plus six unit tests covering valid payloads, range violations,
enum violations, malformed JSON, in-place binding, and JSON-only strict
mode.
This is PR1 of a planned end-to-end Zod rollout — controllers using
local form structs (custom_geo, setEnable, fallbacks, client) keep
their existing handling and will be migrated as their schemas firm up.
* feat(codegen): Go-first tool emitting Zod schemas and TS types
Add tools/openapigen — a single-binary Go program that walks the
exported structs in database/model, web/entity, and xray via go/parser
and emits two committed artifacts under frontend/src/generated:
- zod.ts shared Zod schemas keyed off `validate:` tags (ports get
.min(1).max(65535), Inbound.protocol becomes a z.enum,
Node.scheme too, etc.)
- types.ts plain TS interfaces inferred from the same walk, so
consumers can import Inbound without dragging Zod along
The walker flattens embedded structs (AllSettingView.AllSetting),
honors json:"-" and omitempty, and accepts per-struct overrides so
the JSON-string-inside-JSON columns (Inbound.Settings/StreamSettings/
Sniffing, ClientRecord.Reverse, InboundClientIps.Ips) render as
z.unknown() instead of leaking the DB-storage type into the API
contract. Type aliases like model.Protocol are emitted as TS aliases
and Zod schemas in their own right.
Wires `npm run gen:zod` in frontend/package.json so the generator can
be re-run without leaving the frontend tree. The existing openapi.json
build (gen:api) is left alone for now; migrating the OpenAPI surface
to this generator is a follow-up.
PR2 of the planned Zod end-to-end rollout.
* refactor(frontend): tighten HttpUtil generics from any to unknown
Switch the class-level default on Msg<T> and the per-method defaults on
HttpUtil.get/post/postWithModal from `any` to `unknown`, so callers that
don't pass an explicit T get a narrowed response that must be schema-
checked or type-cast before its shape is trusted.
Drops the four file-level eslint-disable comments these defaults
required. Fixes the nine direct `.obj.field` consumers that surfaced
(IndexPage, XrayMetricsModal, NordModal, WarpModal, LogModal,
VersionModal, XrayLogModal, CustomGeoSection) by giving each call site
the explicit T it should have had from the start — typically a small
ad-hoc shape, sometimes a string for the JSON-text-in-Msg.obj pattern
used by NordModal/WarpModal/Xray nord/warp endpoints.
PR3 of the planned Zod end-to-end rollout — schemas/inbound.ts and
schemas/client.ts loose() removal stays parked until the protocol
schemas land in Phase 3 to avoid silently dropping fields.
* feat(frontend): protocol-leaf Zod schemas with discriminated unions
Stand up schemas/primitives (Port, Flow, Protocol, Sniffing) and per-protocol
leaf schemas for all 10 inbound and 13 outbound xray protocols. The leaves
omit any inner `protocol` literal — the discriminator lives at the parent
level so consumers narrow on `.protocol` without redundant projection. Wire
shape is preserved per protocol: vmess outbound stays in `vnext[]`, trojan
and shadowsocks outbound in `servers[]`, vless outbound flat, http/socks
outbound in `servers[].users[]`.
Cross-protocol atoms (port, flow, sniffing dest, protocol enum) live in
primitives. Protocol-specific enums (vmess security, ss method/network,
hysteria version, freedom domain strategy, dns rule action) stay with their
leaves. Tagged-wrapper `z.discriminatedUnion('protocol', [...])` composes
both InboundSettingsSchema and OutboundSettingsSchema; existing class-based
models in src/models/ are untouched and will be retired in Step 3 once the
golden-file safety net is in place.
* feat(frontend): stream and security Zod families with discriminated unions
Stand up the remaining Step 2 families. NetworkSettingsSchema is a
6-branch DU on `network` covering tcp/kcp/ws/grpc/httpupgrade/xhttp, with
asymmetric per-network wire keys (tcpSettings, wsSettings, ...) preserved
exactly so fixtures round-trip byte-identical. SecuritySettingsSchema is a
3-branch DU on `security` covering none/tls/reality. TLS certs use a
file-vs-inline union; uTLS fingerprints are shared between TLS and Reality
via a single primitive enum.
Hysteria-as-network, finalmask, and sockopt are not in the plan's Step 2
inventory and are deferred to Step 6 (Tighten) - they're orthogonal extras
on the stream root, not network-discriminated branches.
Resolves a Security identifier collision in protocols/index.ts by
re-exporting the type alias as SecurityKind (the `Security` name is taken
by the namespace re-export).
* test(frontend): vitest harness with golden-file fixtures for inbound protocols
Stand up Phase 3 safety net before the models/ rewrite. The harness loads
JSON fixtures via Vite's import.meta.glob, parses each through
InboundSettingsSchema (the tagged-wrapper DU), and snapshots the canonical
parsed shape. Snapshots stay byte-stable across the upcoming class-to-
pure-function extraction, catching any normalization drift.
Six representative inbound fixtures cover the high-traffic protocols:
vless, vmess, trojan, shadowsocks (2022-blake3 multi-user), wireguard,
hysteria2. Stream and security branches plus the remaining protocols
(http, mixed, tunnel, hysteria) follow in subsequent turns.
Uses /// <reference types="vite/client" /> instead of @types/node so we
avoid pulling in another type package; import.meta.glob is enough to walk
the fixtures directory at compile time.
Adds vitest 4.1.7 as the only new dev dependency. test/test:watch scripts
land in package.json; a standalone vitest.config.ts keeps the production
vite.config.js (which reads from sqlite via DatabaseSync) out of the test
runner.
* test(frontend): broaden golden coverage to remaining inbounds + stream + security DUs
Round out Step 3b. Four more inbound fixtures complete the protocol set
(http with two accounts, mixed with socks-style auth, tunnel with a port
map, hysteria v1). Two parallel test files cover the other DUs:
stream.test.ts walks tcp/ws/grpc fixtures through NetworkSettingsSchema,
and security.test.ts walks none/tls/reality through SecuritySettingsSchema.
Snapshot count is now 16 across three test files. The reality fixture
locks in the array form of serverNames/shortIds (the panel class stores
them comma-joined internally but they ship as arrays on the wire). The
TLS fixture pins the file-vs-inline cert DU on the file branch.
Stream coverage for httpupgrade/xhttp/kcp and security mixed-with-stream
combos follow in the next turn, alongside the shadow harness.
* test(frontend): shadow-parse harness asserting legacy class and Zod converge
Add Step 3c's safety net: for every inbound golden fixture, run the raw
payload through both pipelines —
legacy: Inbound.Settings.fromJson(protocol, raw.settings).toJson()
zod: InboundSettingsSchema.parse(raw).settings
— canonicalize each (recursively sort keys, drop empty arrays / null /
undefined), and assert byte-equality. This locks the wire shape across the
upcoming class-to-pure-function extraction in Step 3d. Any normalization
drift introduced by the rewrite trips an assertion here before it can
reach users.
Two ergonomic wrinkles handled inline:
- The legacy class lumps hysteria + hysteria2 onto a single
HysteriaSettings (no hysteria2 case in the dispatch table); the test
routes hysteria2 fixtures through the HYSTERIA branch.
- Empty arrays in Zod's output (e.g. fallbacks: [] from a .default([]))
are treated as equivalent to the legacy class's omit-when-empty
behavior. Same wire state, different syntactic surface.
All 26 tests across 4 test files pass on first run.
* refactor(frontend): extract toHeaders + toV2Headers to lib/xray/headers.ts
First Step 3d extraction. The XrayCommonClass static helpers
toHeaders/toV2Headers are pure data shape conversions with no class
hierarchy needs, so they move to a standalone module that callers can
import without dragging in models/inbound.ts. The new module exports
HeaderEntry + V2HeaderMap as named types so consumers stop reaching into
the legacy class for type shapes.
A new test file (headers.test.ts) asserts byte-equality with the legacy
XrayCommonClass.toHeaders / .toV2Headers across 18 cases — null /
undefined / primitive inputs, single-string headers, array-valued
headers, duplicate names, empty-name and empty-value filtering, both
arr=true (TCP request/response shape) and arr=false (WS / xHTTP / sockopt
shape). Drift between the legacy and new impls fails these tests, so the
follow-up call-site swap stays safe.
Callers (TcpStreamSettings, WsStreamSettings, HTTPUpgradeStreamSettings,
TunnelSettings, etc.) still go through XrayCommonClass for now — those
swaps land alongside class-method extractions in subsequent turns.
Suite is now 44 tests across 5 files; typecheck + lint clean.
* refactor(frontend): extract createDefault*Client factories to lib/xray
Next Step 3d slice. Five plain-object factories — Vless, Vmess, Trojan,
Shadowsocks, Hysteria — replace the legacy
`new Inbound.<Protocol>Settings.<Protocol>(...)` constructor chain and the
ClientBase XrayCommonClass machinery. Each factory takes an optional
seed; missing random fields (id, password, auth, email, subId) fall
through to RandomUtil at call time. Forms can hand-pick a UUID; tests
pass deterministic seeds so the suite never touches window.crypto.
Tests double-verify each factory: a snapshot locks the exact shape, and
the matching Zod ClientSchema.parse(out) must equal `out` — no missing
defaults, no stray fields, type-narrowed end-to-end.
Discovered: VmessClientSchema and VlessClientSchema enforce z.uuid()
format, so the test seeds use real-shape UUIDs.
Suite: 49 tests across 6 files; typecheck + lint clean. Outbound and
inbound-settings factories follow in subsequent turns alongside the
toShareLink extraction.
* refactor(frontend): add createDefault*InboundSettings factories for all 10 protocols
Round out Step 3d's settings factory set. Ten plain-object factories
(vless / vmess / trojan / shadowsocks / hysteria / hysteria2 / http /
mixed / tunnel / wireguard) replace the legacy
`new Inbound.<X>Settings(protocol)` constructors. Each returns a Zod-
parsable wire shape with schema defaults applied — no class instance.
Forms (Step 4) and InboundsPage clone (Step 5) call these factories
directly once the swap lands.
Three factories take a seed for random fields:
- shadowsocks: method-dependent password length via
RandomUtil.randomShadowsocksPassword(method)
- hysteria: explicit `version` override (defaults to 2, matching
the legacy panel constructor — v1 is opt-in)
- wireguard: secretKey from Wireguard.generateKeypair().privateKey
Tests double-verify each factory the same way as the client factories:
snapshot the shape, then Zod parse round-trip to confirm no missing
defaults or stray fields.
Suite: 59 tests across 6 files; typecheck + lint clean. Outbound
factories and the toShareLink extraction follow next.
* refactor(frontend): add getHeaderValue wire-shape lookup to lib/xray/headers
Tiny piece of the toShareLink scaffold. The legacy Inbound.getHeader(obj,
name) iterated the panel's internal HeaderEntry[] form; the new
getHeaderValue reads the Record<string, string|string[]> map our Zod
schemas store on the wire. Case-insensitive, returns '' on miss to match
the legacy fallback so link-generator call sites stay simple.
For repeated-name maps (TCP/WS-style string[] values) the first value
wins — matches the legacy iteration order so the share URL's Host hint
stays deterministic.
Five unit tests cover undefined/null/empty inputs, case folding,
string-valued and array-valued matches, empty-array edge case, and
missing-key fallback. Suite: 64 tests across 6 files; typecheck + lint
clean.
This unblocks the next slice: per-protocol link generators (genVmessLink
etc.) take a typed inbound + client and call getHeaderValue against the
ws/httpupgrade/xhttp/tcp.request header maps.
* feat(frontend): stream extras + full InboundSchema with DU intersection
Step 3d's last scaffolding piece before link generators. Three new
stream-extras schemas land alongside the network/security DUs:
- finalmask: TcpMask[] + UdpMask[] + QuicParams. Mask `settings` stays
record<string, unknown> for now — there are 13 UDP mask types and 3
TCP mask types with distinct per-type setting shapes, and modeling
them all as DUs would dwarf the rest of stream/ without buying
anything the shadow harness doesn't already catch. Tightened in
Step 6.
- sockopt: 17 socket-tuning knobs (TCP keepalive, TFO, mark, tproxy,
mptcp, dialer proxy, IPv6-only, congestion). `interfaceName` field
matches the panel class naming; serializers rename to `interface` on
the wire.
- external-proxy: rows ship per inbound describing edge fronts (CDN
mirrors). Used by link generators to fan out share URLs.
schemas/api/inbound.ts composes the top-level wire shape with
intersection-of-DUs:
StreamSettingsSchema = NetworkSettingsSchema
.and(SecuritySettingsSchema)
.and(StreamExtrasSchema)
InboundSchema = InboundCoreSchema.and(InboundSettingsSchema)
A fixture (vless-ws-tls.json) exercises the full shape — protocol DU,
network DU, security DU, and TLS cert file branch in one round trip.
The snapshot pins the canonical parsed form so the upcoming link
extractor consumes typed input with no class hierarchy underneath.
Suite: 65 tests across 7 files; typecheck + lint clean. Zod 4
intersection-of-DUs works.
* refactor(frontend): extract genVmessLink to lib/xray/inbound-link.ts
First link generator to leave the class hierarchy. genVmessLink takes a
typed Inbound + client args and returns the base64-encoded vmess://
URL. Internal helpers (buildXhttpExtra, applyXhttpExtraToObj,
applyFinalMaskToObj, applyExternalProxyTLSObj, serializeFinalMask,
hasShareableFinalMaskValue, externalProxyAlpn) port across from
XrayCommonClass — same logic, rewritten to read the Zod schemas'
Record<string, string> headers instead of the legacy HeaderEntry[].
Parity test (inbound-link.test.ts) loads each vmess fixture in
golden/fixtures/inbound-full, parses it with InboundSchema for the new
pure fn AND constructs LegacyInbound.fromJson(raw) for the class method,
then asserts the URLs match byte-for-byte. Drift between the two impls
fails here before the call sites in pages/inbounds/* get swapped.
Adds a small test setup file that aliases globalThis.window to globalThis
so Base64.encode's window.btoa works under Node — keeps the test env at
'node' and avoids pulling jsdom as a new dep.
A first vmess-tcp-tls full-inbound fixture pins the round-trip path.
Suite: 67 tests across 8 files; typecheck + lint clean. Five more link
generators (vless/trojan/ss/hysteria/wireguard) plus the orchestrator
(toShareLink, genAllLinks) follow in subsequent turns.
* test(frontend): refresh inbound-full snapshot with vmess-tcp-tls fixture
* refactor(frontend): extract genVlessLink to lib/xray/inbound-link
Second link generator. genVlessLink builds the
vless://<uuid>@<host>:<port>?<query>#<remark> share URL from a typed
Inbound + client args, dispatching on streamSettings.network for the
network-specific knobs and on streamSettings.security for the
TLS/Reality knobs. Three param-style helpers move alongside the obj-
style ones already in this file:
- applyXhttpExtraToParams — writes path/host/mode/x_padding_bytes and
the JSON extra blob into URLSearchParams
- applyFinalMaskToParams — writes the fm payload when shareable
- applyExternalProxyTLSParams — overrides sni/fp/alpn when an external
proxy entry is supplied and security is tls
A vless-tcp-reality fixture lands alongside the existing vless-ws-tls
one, so the parity test now exercises both security branches.
Discovered a latent legacy bug while writing parity: the old class
stored realitySettings.serverNames as a comma-joined string and gated
SNI on `!ObjectUtil.isArrEmpty(serverNames)`, which always returns true
for strings — so SNI was never written into Reality share URLs.
Existing clients rely on the omission (they pull SNI from
realitySettings.target instead). We preserve the omission here to keep
this extraction byte-stable; an inline comment marks the spot for a
separate intentional fix.
Suite: 70 tests across 8 files; typecheck + lint clean.
* refactor(frontend): extract genTrojanLink + genShadowsocksLink to lib/xray
Third and fourth link generators. genTrojanLink mirrors genVlessLink's
shape (URLSearchParams + network/security branches + remark hash) minus
the encryption/flow VLESS-isms. genShadowsocksLink shares the same query
construction but base64-encodes the userinfo portion as method:password
or method:settingsPw:clientPw depending on whether SS-2022 is in
single-user or multi-user mode.
Three reusable helpers move out of the per-protocol functions:
- writeNetworkParams: the per-network switch that all param-style
links share (tcp http header / kcp mtu+tti / ws path+host /
grpc serviceName+authority / httpupgrade / xhttp extras)
- writeTlsParams: fingerprint/alpn/ech/sni
- writeRealityParams: pbk/sid/spx/pqv (preserves the SNI-omission
legacy parity quirk noted in the genVlessLink commit)
genVmessLink stays with its inline switch — it builds a JSON obj instead
of URLSearchParams and has per-network quirks (kcp emits mtu+tti at
the obj root, grpc maps multiMode to obj.type='multi') that don't
factor cleanly through the shared writer.
Two new full-inbound fixtures (trojan-ws-tls, shadowsocks-tcp-2022)
plus matching parity tests bring the suite to 74 tests across 8 files;
typecheck + lint clean.
* refactor(frontend): extract genHysteriaLink + Wireguard link/config to lib/xray
Fifth and sixth link generators. genHysteriaLink builds the v1/v2
share URL (scheme picked from settings.version), copying TLS knobs into
the query, surfacing the salamander obfs password from
finalmask.udp[type=salamander] when present, and writing the broader
finalmask payload under `fm` like the other links.
Legacy parity note: the old genHysteriaLink read
stream.tls.settings.allowInsecure, which isn't a field on
TlsStreamSettings.Settings — the guard always evaluated false and the
`insecure` param never made it into the URL. We omit it here to stay
byte-stable.
genWireguardLink and genWireguardConfig take a typed
WireguardInboundSettings + peer index and:
- link: wireguard://<peerPriv>@host:port?publickey=&address=&mtu=#remark
- config: the .conf text WireGuard clients consume directly
Both derive the server pubKey from settings.secretKey via
Wireguard.generateKeypair at call time — Zod stores only secretKey on
the wire (pubKey is computed). The Wireguard utility is pure JS (X25519
over Float64Array), so it runs fine under node + the window polyfill we
added with the vmess extraction.
Two new full-inbound fixtures (hysteria-v1-tls, wireguard-server) plus
matching parity tests bring the suite to 78 tests across 8 files;
typecheck + lint clean.
Hysteria2 (protocol literal) parity stays deferred — the legacy
class has no HYSTERIA2 dispatch case, so it can't round-trip a
hysteria2 fixture without a protocol remap. Same trick the shadow
harness uses; revisit in the orchestrator commit.
* refactor(frontend): extract share-link orchestrator to lib/xray/inbound-link
Last slice of Step 3d. Five orchestrator exports compose the per-
protocol generators into the public surface the panel consumes:
- resolveAddr(inbound, hostOverride, fallbackHostname): picks the
address that goes into share/sub URLs. Browser `location.hostname`
is no longer a hidden dependency — callers pass it in (or any other
fallback they want).
- getInboundClients(inbound): protocol-aware clients accessor.
Mirrors the legacy `Inbound.clients` getter, including the SS
quirk where 2022-blake3-chacha20 single-user inbounds report null
(no client loop) and everything else returns the clients array.
- genLink: per-protocol dispatcher matching legacy Inbound.genLink.
- genAllLinks: per-client fanout. Builds the remarkModel-formatted
remark (separator + 'i'/'e'/'o' field picker) and iterates
streamSettings.externalProxy when present.
- genInboundLinks: top-level \r\n-joined link block. Loops per
client for clientful protocols, single-shots SS for non-multi-user,
and delegates to genWireguardConfigs for wireguard. Returns ''
for http/mixed/tunnel (no share URL at all).
Plus genWireguardLinks / genWireguardConfigs fanouts which iterate
peers and append index-suffixed remarks.
Parity test exercises every full-inbound fixture against legacy
Inbound.genInboundLinks. Skips hysteria2 (no legacy dispatch case;
that bridge belongs in a separate intentional commit alongside the
form modal swap). Suite: 89 tests across 8 files; typecheck + lint
clean.
Next: Step 4 form modal migrations. Forms can now drop
`new Inbound.Settings.getSettings(protocol)` in favor of the
createDefault*InboundSettings factories, and InboundsPage clone can
swap to genInboundLinks. Models/ deletion follows in Step 5 once all
call sites are off the class.
* refactor(frontend): swap InboundsPage clone fallback off Inbound.Settings.getSettings
First Step 4 call-site swap. createDefaultInboundSettings(protocol) lands
in lib/xray/inbound-defaults — a protocol-aware dispatch over the 10
per-protocol settings factories already in this module. Returns a Zod-
parsable plain object instead of a class instance, so callers that just
need the wire-shape JSON can drop the class hierarchy without touching
the broader form modals.
InboundsPage's clone path used Inbound.Settings.getSettings(p).toString()
as the fallback when settings JSON parsing failed. That's now
createDefaultInboundSettings + JSON.stringify, with a final '{}' guard
for unknown protocols (legacy returned null and .toString() crashed —
we just emit empty settings instead). The Inbound import on this file
is now unused and removed.
The 2 remaining getSettings call sites in InboundFormModal aren't safe
to swap in isolation — the form mutates the returned class instance
through methods like .addClient() and .toJson() across ~2000 lines of
JSX. Those land with the full Pattern A rewrite of InboundFormModal,
which the plan budgets at multiple days on its own.
Suite: 89 tests across 8 files; typecheck + lint clean.
* refactor(frontend): lift Protocols + TLS_FLOW_CONTROL consts to schemas/primitives
Step 4b. The Protocols and TLS_FLOW_CONTROL enums on models/inbound.ts
were dragging five page files into that 3,300-line module just to read
literal string constants. Lifting them to schemas/primitives lets those
pages drop the @/models/inbound import entirely.
- schemas/primitives/protocol.ts now exports a Protocols const map
alongside the existing ProtocolSchema. TUN stays in the const for
parity (legacy panel deployments may have saved TUN inbounds) even
though the Go validator no longer accepts it as a new write.
- schemas/primitives/flow.ts now exports TLS_FLOW_CONTROL. The
empty-string default isn't keyed because the legacy never had a
NONE entry — call sites compare against the two real flow values.
Updated five consumers:
- useInbounds.ts: TRACKED_PROTOCOLS now annotated readonly string[]
so .includes(string) keeps narrowing through the array literal
- QrCodeModal.tsx, InboundInfoModal.tsx: Protocols
- ClientFormModal.tsx, ClientBulkAddModal.tsx: TLS_FLOW_CONTROL
Suite: 89 tests across 8 files; typecheck + lint clean.
models/inbound.ts is now imported by:
- InboundFormModal.tsx (heavy use of Inbound class + getSettings)
- test/inbound-link.test.ts + test/shadow.test.ts + test/headers.test.ts
(intentional — these are parity tests against the legacy class)
OutboundFormModal still imports from models/outbound. Both form modals
are the multi-day Pattern A rewrites the plan scopes separately.
* refactor(frontend): lift OutboundProtocols + OutboundDomainStrategies to schemas/primitives
Moves the two outbound-side consts out of models/outbound.ts and into
schemas/primitives/outbound-protocol.ts. Renames the export to
OutboundProtocols to disambiguate from the inbound Protocols const
(different key casing — PascalCase vs ALL CAPS — and partly different
member set, so they cannot share a single const).
OutboundsTab.tsx keeps its 15+ Protocols.X call sites by aliasing
the import. FinalMaskForm.tsx and BasicsTab.tsx swap directly.
Drops a stale `as string[]` cast in BasicsTab that no longer fits
the new readonly-tuple typing.
After this commit only the two big form modals
(InboundFormModal/OutboundFormModal) plus three intentional parity
tests still import from @/models/.
* refactor(frontend): lift outbound option dictionaries to schemas/primitives
Adds schemas/primitives/options.ts with UTLS_FINGERPRINT, ALPN_OPTION,
SNIFFING_OPTION, USERS_SECURITY, MODE_OPTION (all identical between
models/inbound.ts and models/outbound.ts) plus the outbound-only
WireguardDomainStrategy, Address_Port_Strategy, and DNSRuleActions.
OutboundFormModal now pulls 9 consts from primitives. Only `Outbound`
(the class) and `SSMethods` (whose inbound/outbound versions diverge by
2 legacy aliases — keep the picker open for the Pattern A rewrite) still
come from @/models/outbound.
Drops three stale `as string[]` casts on what are now readonly tuples.
* refactor(frontend): swap InboundFormModal option dicts to schemas/primitives
Extends primitives/options.ts with the five inbound-only option dicts
(TLS_VERSION_OPTION, TLS_CIPHER_OPTION, USAGE_OPTION,
DOMAIN_STRATEGY_OPTION, TCP_CONGESTION_OPTION) and lifts InboundFormModal
off @/models/inbound for 10 of its 12 imports. Only the Inbound class
and SSMethods (inbound vs outbound versions diverge by 2 entries) still
come from @/models/.
Widens NODE_ELIGIBLE_PROTOCOLS Set element type to string since the new
primitives const exposes a narrow literal union that `.has(arbitraryString)`
would otherwise reject.
* feat(frontend): InboundFormValues schema for Pattern A rewrite
Foundation for the InboundFormModal rewrite. Mirrors the wire Inbound
shape (intersection of core fields + protocol settings DU + stream/security
DUs) plus the DB-side fields (up/down/total/trafficReset/nodeId/...) that
flow through DBInbound rather than the xray config slice.
InboundStreamFormSchema is exported separately so individual sub-form
sections can rule against just the stream portion when needed.
FallbackRowSchema is co-located here even though fallbacks save via a
distinct endpoint after the main POST — they belong to the same form
state from the user's perspective.
No modal changes in this commit. Foundation only; subsequent turns swap
the modal's `inboundRef`/`dbFormRef` mutable-class state for
Form.useForm<InboundFormValues>().
* feat(frontend): adapter between raw inbound rows and InboundFormValues
Adds lib/xray/inbound-form-adapter.ts with rawInboundToFormValues and
formValuesToWirePayload. The pair is the data boundary the upcoming
Pattern A modal will use: it consumes the DB row shape (settings et al.
as string OR object — coerced internally), hands the modal typed
InboundFormValues, and on submit reverses the trip to a wire payload
with the three JSON-stringified slices the Go endpoints expect.
No dependency on the legacy Inbound/DBInbound classes — the coerce step
is inlined so the adapter survives the eventual models/ deletion.
Adds 10 Vitest cases covering string vs object inputs, the optional
streamSettings/nodeId fields, trafficReset coercion, and a raw-to-payload
-to-raw round-trip equality.
* feat(frontend): protocol capability predicates as pure functions
Adds lib/xray/protocol-capabilities.ts with the seven predicates the
modals call: canEnableTls, canEnableReality, canEnableTlsFlow,
canEnableStream, canEnableVisionSeed, isSS2022, isSSMultiUser. Each
takes a minimal slice of an InboundFormValues, no class instance.
The legacy isSSMultiUser returns true on non-shadowsocks protocols too
(method getter resolves to "" which != blake3-chacha20-poly1305). The
new function preserves this quirk and documents it inline; callers all
narrow on protocol === shadowsocks before checking, so the surprising
return value never surfaces.
Parity harness in test/protocol-capabilities.test.ts crosses each of
the 10 golden fixtures with 14 stream configurations (network × security)
and asserts each predicate matches the legacy class method — 140 cases,
all green.
* feat(frontend): outbound settings factories + dispatcher
Adds lib/xray/outbound-defaults.ts parallel to inbound-defaults.ts:
13 createDefault*OutboundSettings factories (one per outbound protocol)
plus the createDefaultOutboundSettings(protocol) dispatcher mirroring
Outbound.Settings.getSettings's contract — non-null on each known
protocol, null otherwise.
The factory output matches the legacy `new Outbound.<X>Settings()` start
state: required-by-schema fields the user fills in via the form
(address, port, password, id, peer publicKey/endpoint) come back as
empty stubs. Wireguard alone seeds secretKey via the X25519 generator;
the rest expose blank fields. This is the same behavior the
OutboundFormModal relies on for protocol-change resets.
Shadowsocks defaults to 2022-blake3-aes-128-gcm rather than the legacy
undefined — the Select snaps to the first option anyway, so the
coherent default keeps the modal from rendering an empty picker.
Tests cover three layers:
- exact-shape snapshots per factory (13 cases)
- Zod schema acceptance after sensible stub fill-in (13 cases)
- dispatcher non-null per known protocol + null for the unknown (14 cases)
* feat(frontend): InboundFormModal.new.tsx skeleton (Pattern A)
First commit of the sibling-file modal rewrite. The new modal mounts
Form.useForm<InboundFormValues>, hydrates via rawInboundToFormValues on
open (edit) or buildAddModeValues (add), runs validateFields + safeParse
on submit, and posts the formValuesToWirePayload result. No tabs yet —
the modal body shows a WIP placeholder.
The file is not imported anywhere; the existing InboundFormModal.tsx
remains the one InboundsPage renders. Build, lint, and 280 tests stay
green. Subsequent commits add the basic / sniffing / protocol / stream /
security / advanced / fallbacks sections; the atomic import swap in
InboundsPage.tsx lands last.
* feat(frontend): basic tab on InboundFormModal.new.tsx (Pattern A)
First real section of the sibling-file rewrite. Wires AntD Form.Items
to InboundFormValues paths for the basic tab — enable, remark, deployTo
(when protocol is node-eligible), protocol, listen, port, totalGB,
trafficReset, expireDate.
The port input gets a per-field antdRule against
InboundFormBaseSchema.shape.port — the spec's Pattern A reference. The
intersection-typed InboundFormSchema has no .shape accessor, so per-field
rules pull from the underlying ZodObject components.
totalGB and expireDate are bytes/timestamp on the wire but a GB number /
dayjs picker in the UI. Both use shouldUpdate-closure children that read
form state and call setFieldValue on user input — no transient
form-only fields, no DU-shape surprises at submit time.
Protocol-change cascade lives in Form's onValuesChange: pick a new
protocol and the settings DU branch is reset to
createDefaultInboundSettings(next); a non-node-eligible protocol also
clears nodeId.
Modal still renders a single-tab Tabs container. Sniffing tab is next.
* feat(frontend): sniffing tab on InboundFormModal.new.tsx (Pattern A)
Second section of the sibling-file rewrite. Wires the six sniffing
sub-fields to nested form paths ['sniffing', 'enabled'], ['sniffing',
'destOverride'], etc. Uses Form.useWatch on the enabled flag to drive
conditional rendering of the dependent fields — the same gate the
legacy modal expressed via `ib.sniffing.enabled &&`.
Checkbox.Group renders one Checkbox per SNIFFING_OPTION entry. The two
exclusion lists use Select mode="tags" so the user can paste comma-
separated IP/CIDR or domain rules.
No transient form state, no class methods — every field maps directly
to a wire-shape path in InboundFormValues.
Protocol tab is next.
* feat(frontend): protocol tab VLESS auth on InboundFormModal.new.tsx
Adds the protocol tab to the sibling-file rewrite — currently only the
VLESS section, which lays out decryption/encryption inputs and the three
buttons that drive them: Get New x25519, Get New mlkem768, Clear.
getNewVlessEnc + clearVlessEnc are ported from the legacy modal as
pure setFieldValue paths into ['settings', 'decryption'] /
['settings', 'encryption'] — no class methods, no inboundRef. The
matchesVlessAuth helper mirrors the legacy fuzzy label-matching so the
backend response shape stays the only source of truth.
selectedVlessAuth derives the displayed auth label from the encryption
string via Form.useWatch — same heuristic as the legacy modal
(.length > 300 → mlkem768, otherwise x25519).
Tab spread is conditional: the protocol tab only appears when
protocol === 'vless' right now. As more protocol sections land
(shadowsocks, http/mixed, tunnel, tun, wireguard) the condition will
widen to cover each one.
* feat(frontend): protocol tab Shadowsocks section (Pattern A)
Adds the Shadowsocks sub-form: method picker (from SSMethodSchema's
seven schema-aligned options), conditional password input gated on
isSS2022, network picker (tcp/udp/tcp,udp), ivCheck toggle.
Method change cascades through the Select's onChange — regenerating
the inbound-level password via RandomUtil.randomShadowsocksPassword.
The shadowsockses[] multi-user list reset is deferred until the
clients-management section lands.
Uses isSS2022 from lib/xray/protocol-capabilities to gate the password
field exactly the way the legacy modal did — keeps the form behavior
identical without referencing the legacy class.
SSMethodSchema.options drives the Select rather than the legacy
SSMethods const (which the inbound modal pulled from models/inbound.ts).
This commits to the schema-aligned 7-entry list for inbound; the
outbound divergence (9 entries with legacy aliases) is still pending
in OutboundFormModal — defer the UX decision to that rewrite.
* feat(frontend): protocol tab HTTP and Mixed sections (Pattern A)
Adds the HTTP and Mixed sub-forms. Both share an accounts list — first
Form.List usage in the rewrite. Each row binds via [field.name, 'user']
/ [field.name, 'pass'] under the parent ['settings', 'accounts'] path,
so the wire shape stays exactly what HttpInboundSettingsSchema and
MixedInboundSettingsSchema validate.
HTTP-only: allowTransparent Switch.
Mixed-only: auth Select (noauth/password), udp Switch, conditional ip
Input gated on the udp value via Form.useWatch.
Tab visibility widens to include http + mixed alongside vless +
shadowsocks. The string cast on the includes-check keeps the frozen
Protocols const's narrow union from rejecting the broader protocol
string at the call site.
* feat(frontend): protocol tab Tunnel section (Pattern A)
Adds the Tunnel sub-form: rewriteAddress + rewritePort, allowedNetwork
picker (tcp/udp/tcp,udp), Form.List-driven portMap with name/value
pairs, and the followRedirect Switch.
portMap is the second Form.List in the rewrite — same shape as the
HTTP/Mixed accounts list but with name/value rather than user/pass.
The wire shape stays `settings.portMap: { name, value }[]` exactly.
Tab visibility widens to Tunnel.
* feat(frontend): protocol tab TUN section (Pattern A)
Adds the TUN sub-form: interface name, MTU, four primitive-array
Form.Lists (gateway, dns, autoSystemRoutingTable), userLevel,
autoOutboundsInterface.
Primitive Form.Lists bind each row's Input directly to `field.name`
(no inner key) — distinct from the object-row Form.Lists that bind to
`[field.name, 'fieldKey']`.
The Form.useWatch('protocol') return type comes from the schema's
protocol enum which excludes 'tun' (TUN is in the legacy Protocols
const for data parity but never accepted by the wire validator). Cast
to string at the source so per-section comparisons against
Protocols.TUN typecheck. Why: legacy DB rows with protocol === 'tun'
still need to render; widening here keeps reads from rejecting them.
Tab visibility widens to TUN.
* feat(frontend): protocol tab Wireguard section (Pattern A)
Adds the Wireguard sub-form: server secretKey input with regen icon,
derived disabled public-key display, mtu, noKernelTun toggle, and a
Form.List of peers — each peer having its own privateKey (regen icon),
publicKey, preSharedKey, allowedIPs (nested Form.List for the string
array), keepAlive.
pubKey is purely derived (computed via Wireguard.generateKeypair from
the watched secretKey) and is NOT stored in the form value — the schema
omits it from the wire shape on purpose. The disabled display shows the
live derivation without polluting form state.
regenInboundWg generates a fresh keypair and writes only the
secretKey path; pubKey re-derives automatically. regenWgPeerKeypair
writes both privateKey and publicKey at the peer's path index.
The preSharedKey wire-shape name is used instead of the legacy class's
internal psk — matches WireguardInboundPeerSchema.
Tab visibility widens to Wireguard.
* feat(frontend): stream tab skeleton with TCP + KCP (Pattern A)
Opens the stream tab on the sibling-file rewrite. Tab visibility is
driven by canEnableStream from lib/xray/protocol-capabilities — same
gate the legacy modal used, now schema-aware.
Transmission picker (network select) is hidden for HYSTERIA since
that protocol's network is implicit. onNetworkChange clears any stale
per-network settings keys (tcpSettings/kcpSettings/...) and seeds an
empty object for the new branch so AntD Form.Items don't read from
undefined nested paths.
TCP section: acceptProxyProtocol Switch (literal-true-optional on the
wire — the form stores true/false but Zod's strip behavior keeps
false-as-omission round-trips clean) plus an HTTP-camouflage toggle
that flips header.type between 'none' and 'http'. The full HTTP
camouflage request/response sub-form lands in a follow-up commit.
KCP section: six numeric knobs (mtu, tti, upCap, downCap,
cwndMultiplier, maxSendingWindow).
WS / gRPC / HTTPUpgrade / XHTTP / external-proxy / sockopt / hysteria
stream / FinalMaskForm hookup all still pending.
* feat(frontend): stream tab WS + gRPC + HTTPUpgrade sections (Pattern A)
Adds the three medium-complexity network branches to the stream tab.
Plain Form.Item paths into the corresponding *Settings keys — no
Form.List wrappers since these schemas don't have arrays at the top
level.
WS: acceptProxyProtocol, host, path, heartbeatPeriod
gRPC: serviceName, authority, multiMode
HTTPUpgrade: acceptProxyProtocol, host, path
Header editing is deferred to a later commit — WsHeaderMap is a
Record<string,string> on the wire, V2HeaderMap a Record<string,string[]>,
and the form needs an array-of-{name,value} UI that converts on edit.
Worth building once and reusing across WS, HTTPUpgrade, XHTTP, TCP
request/response, and Hysteria masquerade headers.
XHTTP + external-proxy + sockopt + hysteria stream + finalmask hookup
still pending.
* feat(frontend): stream tab XHTTP section (Pattern A)
XHTTP is the heaviest network branch — 19 fields rendered conditionally
on mode, xPaddingObfsMode, and the three *Placement selectors. Each
gates its dependent field set via Form.useWatch.
Field structure mirrors the legacy XHTTPStreamSettings form 1:1:
- mode picker (auto / packet-up / stream-up / stream-one)
- packet-up adds scMaxBufferedPosts + scMaxEachPostBytes; stream-up
adds scStreamUpServerSecs
- serverMaxHeaderBytes, xPaddingBytes, uplinkHTTPMethod (with the
packet-up gate on the GET option)
- xPaddingObfsMode unlocks xPadding{Key,Header,Placement,Method}
- sessionPlacement / seqPlacement each unlock their respective Key
field when set to anything other than 'path'
- packet-up mode additionally unlocks uplinkDataPlacement, and that
in turn unlocks uplinkDataKey when the placement is not 'body'
- noSSEHeader Switch at the tail
XHTTP headers editor still pending (same WsHeaderMap as WS — will be
unified in the header-editor extraction commit).
* feat(frontend): stream tab external-proxy + sockopt sections (Pattern A)
External Proxy: Switch driven by externalProxy array length. Toggling
on seeds one row with the window hostname + the inbound's current port;
toggling off clears the array. Each row is a Form.List item with
forceTls/dest/port/remark inline, and a nested SNI/Fingerprint/ALPN
row that conditionally renders on forceTls === 'tls' via a
shouldUpdate-closure that watches the per-row forceTls path.
Sockopt: Switch driven by whether the sockopt object exists in form
state. Toggling on calls SockoptStreamSettingsSchema.parse({}) so every
default the schema declares (mark=0, tproxy='off', domainStrategy='UseIP',
tcpcongestion='bbr', etc.) flows into the form; toggling off sets to
undefined.
Renders the seventeen sockopt fields directly bound to
['streamSettings', 'sockopt', X] paths. Option lists pull from the
primitives const dictionaries (UTLS_FINGERPRINT, ALPN_OPTION,
DOMAIN_STRATEGY_OPTION, TCP_CONGESTION_OPTION) rather than the
schema's .options to keep one source of truth for UI label strings.
* feat(frontend): security tab base + TLS section (Pattern A)
Adds the security tab to the sibling-file rewrite. Visibility is paired
with the stream tab — both gated on canEnableStream. The security
selector is itself disabled when canEnableTls is false, and the reality
option only appears when canEnableReality is true, mirroring the legacy
modal's Radio.Group guards.
onSecurityChange clears the previous branch's *Settings key and seeds
the new branch from the schema's parsed defaults (the same trick the
sockopt toggle uses). The security selector itself is rendered via a
shouldUpdate closure so the on-change handler can write the cleaned
streamSettings shape atomically without racing AntD's per-field sync.
TLS section: serverName (the wire field — the legacy class calls it
sni internally), cipherSuites (with the 13 named suites from
TLS_CIPHER_OPTION), min/max version pair, uTLS fingerprint, ALPN
multi-select, plus the three policy Switches.
TLS certificates list, ECH controls, the full Reality sub-form, and
the four API-call buttons (genRealityKeypair / genMldsa65 / getNewEchCert
/ randomizers) land in a follow-up commit.
* feat(frontend): security tab Reality + ECH + mldsa65 controls (Pattern A)
Adds the Reality sub-form and the four API-call buttons that drive
the server-generated material:
- genRealityKeypair calls /panel/api/server/getNewX25519Cert and writes
the result into ['streamSettings', 'realitySettings', 'privateKey']
and the nested settings.publicKey path.
- genMldsa65 calls /panel/api/server/getNewmldsa65 for the
post-quantum seed/verify pair.
- getNewEchCert calls /panel/api/server/getNewEchCert with the current
serverName and writes echServerKeys + settings.echConfigList.
- randomizeRealityTarget seeds target + serverNames from the random
reality-targets pool.
- randomizeShortIds calls RandomUtil.randomShortIds (comma-joined
string) and splits into the schema's string[] form.
Reality fields are bound directly to schema paths — show/xver/target,
maxTimediff, min/max ClientVer, the settings.{publicKey, fingerprint,
spiderX, mldsa65Verify} nested subtree, plus the array fields
(serverNames, shortIds) rendered as Select mode="tags" since both ship
as string[] on the wire.
TLS certificates list (Form.List with the useFile DU) still pending —
that's a chunky sub-form on its own.
* feat(frontend): security tab TLS certificates list (Pattern A)
Closes out the security tab: a Form.List of certificates that toggles
between TlsCertFileSchema (certificateFile + keyFile string paths) and
TlsCertInlineSchema (certificate + key as string arrays per the wire
shape) via a per-row useFile boolean.
useFile is a transient form-only field — not part of TlsCertSchema.
Zod's default-strip behavior drops it during InboundFormSchema parse
on submit, leaving only the matching wire branch's keys populated.
Whichever side the user wasn't on stays empty, so Zod's union picks
the populated branch.
For inline certs the TextAreas use normalize + getValueProps to convert
between the wire-side string[] and the multi-line text the user types.
Each line becomes one array element, matching the legacy class's
`cert.split('\n')` toJson convention.
Per-row buildChain is conditionally rendered when usage === 'issue' —
a shouldUpdate-closure watches the specific path so the toggle
re-renders inline without listening to unrelated form changes.
Security tab is now functionally complete. Advanced JSON tab,
Fallbacks card, and the atomic swap in InboundsPage are next.
* feat(frontend): advanced JSON tab on InboundFormModal.new.tsx (Pattern A)
Adds the advanced JSON tab. Each sub-tab (settings / streamSettings /
sniffing) renders an AdvancedSliceEditor — a small CodeMirror-backed
JsonEditor that holds a local text buffer and forwards parsed JSON to
form state on every valid edit.
Invalid JSON sits silently in the local buffer; once the user finishes
balancing braces / quoting, the next valid parse pushes through to the
form. No stamping ref, no apply-on-tab-switch ceremony — the form is
the single source of truth.
The buffer seeds once from form state on mount. The Modal's
destroyOnHidden means each open is a fresh editor instance, so external
form mutations during a single open session can't desync the editor
either.
The streamSettings sub-tab is omitted when streamEnabled is false
(matching the legacy modal's behavior for protocols like Http / Mixed
that have no stream layer).
* feat(frontend): fallbacks card on InboundFormModal.new.tsx (Pattern A)
Adds the fallbacks card rendered inside the protocol tab whenever the
current values describe a fallback host — VLESS or Trojan on tcp with
tls or reality security. The protocol tab visibility widens to include
Trojan in that exact case (it has no other protocol sub-form).
Fallbacks live in a useState alongside the form rather than inside form
values, mirroring the legacy modal: fallbacks save via a distinct
endpoint (/panel/api/inbounds/{id}/fallbacks) after the main inbound
POST, not as part of the inbound payload. loadFallbacks runs on open
for edit-mode VLESS/Trojan; saveFallbacks runs after a successful POST
inside the submit handler.
Each row: child picker (filtered down to other inbounds), then four
inline edits for SNI / ALPN / path / xver. Add adds an empty row;
delete pulls the row from state.
Quick-Add-All, the rederive-from-child helper, and the per-row up/down
movers are deferred — the basic add/edit/remove cycle is what the modal
actually needs to function.
* feat(frontend): atomic swap InboundFormModal to Pattern A
Deletes the 2261-line class-mutation modal and renames the
1900-line sibling rewrite into its place. InboundsPage.tsx already
imports the file by path so no consumer change is needed — the swap
is one file delete plus one file rename. Build, lint, and 280 tests
stay green.
What the new modal covers end-to-end:
- Basic (enable / remark / nodeId / protocol / listen / port /
totalGB / trafficReset / expireDate)
- Sniffing (enabled / destOverride / metadataOnly / routeOnly /
ipsExcluded / domainsExcluded)
- Protocol per DU branch: VLESS (decryption/encryption + buttons),
Shadowsocks (method/password/network/ivCheck), HTTP + Mixed
(accounts list + per-protocol toggles), Tunnel (rewrite + portMap +
followRedirect), TUN (interface/mtu + four primitive lists +
userLevel/autoInterface), Wireguard (secretKey + derived pubKey +
peers list with nested allowedIPs)
- Stream per network: TCP base, KCP, WS, gRPC, HTTPUpgrade, XHTTP
(the 22-field one), plus external-proxy and sockopt extras
- Security: TLS (SNI/cipher/version/uTLS/ALPN/policy switches +
certificates list with file/inline toggle + ECH controls), Reality
(every field + the four API-call buttons), none
- Advanced JSON (settings / streamSettings / sniffing live editors
that round-trip into form state on every valid parse)
- Fallbacks (load on open for VLESS/Trojan TLS-or-Reality TCP hosts;
save through the secondary endpoint after the main POST succeeds)
Known regressions vs the legacy modal, all reachable via Advanced JSON
until backfilled in follow-up commits:
- Hysteria stream sub-form (masquerade / udpIdleTimeout / version) —
schema gap; the existing inbound DU has no hysteria stream branch
- FinalMaskForm hookup — the component is still class-shape coupled
- HeaderMapEditor — TCP request/response headers, WS / HTTPUpgrade /
XHTTP headers, Hysteria masquerade headers all need a shared editor
- TCP HTTP camouflage request/response body (version, method, path
list, headers, status, reason) — only the on/off toggle is wired
- Fallbacks polish — up/down move, quick-add-all, rederive-from-child,
the per-row advanced-toggle / proxy-tag chips
No reference to @/models/inbound's Inbound class anywhere in the new
modal — only @/models/dbinbound (out of scope) and
@/models/reality-targets (out of scope). The protocol-capabilities
predicates and the rawInboundToFormValues + formValuesToWirePayload
adapters carry every behavior the class used to provide.
* fix(frontend): finish InboundFormModal rename after atomic swap
The atomic-swap commit landed the new file but the exported function was
still named InboundFormModalNew. Rename to match the file.
* feat(frontend): outbound form schema + wire adapter foundation
Lay the groundwork for OutboundFormModal's Pattern A rewrite:
- schemas/forms/outbound-form.ts: discriminated-union form values across
all 12 outbound protocols, with flat per-protocol settings shapes that
match the legacy class fields (vmess vnext / trojan-ss-socks-http
servers / wireguard csv address-reserved all flattened).
- lib/xray/outbound-form-adapter.ts: rawOutboundToFormValues converts
wire-shape outbound JSON to typed form values; formValuesToWirePayload
re-nests on submit. Replaces the Outbound.fromJson/toJson dependency
the modal currently has on the legacy class hierarchy.
- test/outbound-form-adapter.test.ts: 15 round-trip cases covering each
protocol's wire quirks (vmess vnext flatten, vless reverse-wrap,
wireguard csv↔array, blackhole response wrap, DNS rule normalization,
mux gating).
* feat(frontend): OutboundFormModal.new.tsx skeleton (Pattern A)
Sibling .new.tsx file with the Modal shell, Tabs (Basic/JSON), Form.useForm
hydration via rawOutboundToFormValues, and the submit pipeline that calls
formValuesToWirePayload before onConfirm. Tag uniqueness check is wired in.
Protocol-specific sub-forms, stream, security, sockopt, and mux sections
are deferred to subsequent commits — accessible via the JSON tab in the
meantime. The InboundsPage continues to render the legacy modal until the
atomic swap at the end.
Also: rawOutboundToFormValues now returns streamSettings as undefined
when the wire payload omits it, so Form.useForm doesn't receive a value
that does not match the NetworkSettings discriminated union.
* feat(frontend): OutboundFormModal.new.tsx vmess/vless/trojan/ss sections
- Shared connect-target sub-block (address + port) for the six protocols
whose form schema carries them flat at settings root.
- VMess: id + security Select (USERS_SECURITY).
- VLESS: id + encryption + flow + reverseTag (reverse-sniffing slice and
Vision testpre/testseed come in a later commit).
- Trojan: password.
- Shadowsocks: password + method Select (SSMethodSchema) + UoT switch +
UoT version.
onValuesChange cascade: when the user picks a different protocol, the
adapter re-seeds the settings sub-object to the new protocol's defaults
so leftover fields from the previous protocol do not bleed through.
* feat(frontend): OutboundFormModal.new.tsx socks/http/hysteria/loopback/blackhole/wireguard sections
- SOCKS / HTTP: user + pass at settings root.
- Hysteria: read-only version=2 (the actual transport knobs live on
stream.hysteria, added with the stream tab).
- Loopback: inboundTag.
- Blackhole: response type Select with empty/none/http options.
- Wireguard: address (csv) + secretKey (with regenerate icon) + derived
pubKey + domain strategy + MTU + workers + no-kernel-tun + reserved
(csv) + peers Form.List with nested allowedIPs sub-list.
Wireguard regenerate icon uses Wireguard.generateKeypair() and writes
both keys to the form via setFieldValue — preserves the legacy UX of
the SyncOutlined inline-icon next to the privateKey label.
* feat(frontend): OutboundFormModal.new.tsx DNS + Freedom + VLESS reverse-sniffing
- DNS: rewriteNetwork (udp/tcp Select) + rewriteAddress + rewritePort +
userLevel + rules Form.List (action/qtype/domain).
- Freedom: domainStrategy + redirect + Fragment Switch with conditional
4-field sub-block (legacy 'enable Fragment' UX preserved — Switch sets
all four fields to populated defaults, off-state empties them all out
so the adapter strips them on submit) + Noises Form.List (rand/base64/
str/hex types, packet/delay/applyTo per row) + Final Rules Form.List
with conditional block-delay sub-field.
- VLESS reverse-sniffing slice: rendered only when reverseTag is set
(matches the legacy modal's nested conditional). All six fields wired
to the form state with appropriate widgets (Switch / Select multi /
Select tags).
* feat(frontend): OutboundFormModal.new.tsx stream tab (TCP/KCP/WS/gRPC/HTTPUpgrade)
Wire the stream sub-form into the Pattern A modal:
- newStreamSlice(network) helper bootstraps the per-network DU branch
with Xray defaults (mtu=1350, tti=20, uplinkCapacity=5, etc.).
- streamSettings is seeded once when the protocol supports streams
but the form has no slice yet (new outbound + protocol switch).
- onNetworkChange swaps the sub-key and preserves security when the
new network still supports it, else snaps back to 'none'.
- Per-network sub-forms wired:
TCP: HTTP camouflage Switch (sets header.type = 'http' / 'none')
KCP: 6 numeric tuning fields
WS: host + path + heartbeat
gRPC: service name + authority + multi-mode switch
HTTPUpgrade: host + path
XHTTP: host + path + mode + padding bytes (advanced fields via JSON)
Security radio, TLS/Reality sub-forms, sockopt, and mux still pending.
* feat(frontend): OutboundFormModal.new.tsx security tab (TLS + Reality + Flow)
- onSecurityChange cascade: swaps tlsSettings/realitySettings sub-key
matching the DU branch, seeding the new sub-form with empty/default
fields so the UI does not reference undefined values.
- Flow Select rendered when canEnableTlsFlow is true (VLESS + TCP +
TLS/Reality). Moved from the basic VLESS section so it only appears
in the relevant security context — matches the legacy modal UX.
- Security Radio (none / TLS / Reality) gated by canEnableTls and
canEnableReality pure-function predicates from
lib/xray/protocol-capabilities.
- TLS sub-form: 6 outbound-specific fields (SNI/uTLS/ALPN/ECH/
verifyPeerCertByName/pinnedPeerCertSha256) matching the legacy
TlsStreamSettings flat shape (no certificates list — outbound is
client-side).
- Reality sub-form: 6 fields (SNI/uTLS/shortId/spiderX/publicKey/
mldsa65Verify). publicKey + mldsa65Verify get TextAreas to handle
the long base64 strings.
* feat(frontend): OutboundFormModal.new.tsx sockopt + mux sections
- Sockopts: Switch toggles streamSettings.sockopt between undefined and
a populated default object (17 fields with sane bbr/UseIP defaults).
Only the 8 most-used fields are rendered (dialer proxy, domain
strategy, keep alive interval, TFO, MPTCP, penetrate, mark, interface).
The remaining sockopt knobs (acceptProxyProtocol, tcpUserTimeout,
tcpcongestion, tcpKeepAliveIdle, tcpMaxSeg, tcpWindowClamp, V6Only,
trustedXForwardedFor, tproxy) are still in the wire payload — edit
them via the JSON tab.
- Mux: gated by isMuxAllowed(protocol, flow, network) — VMess/VLESS/
Trojan/SS/HTTP/SOCKS, no flow set, no xhttp transport. Sub-fields
(concurrency / xudpConcurrency / xudpProxyUDP443) only render when
enabled is true.
- Sockopt section visible only when streamAllowed AND network is set —
non-stream protocols (freedom/blackhole/dns/loopback) still edit
sockopt via the JSON tab.
* feat(frontend): atomic swap OutboundFormModal to Pattern A
Delete the legacy 1473-line class-based OutboundFormModal.tsx and replace
it with the new Pattern A modal (Form.useForm + antdRule + per-protocol
discriminated-union form values + wire adapter).
Net diff: legacy file gone, function renamed from OutboundFormModalNew
to OutboundFormModal so the existing OutboundsTab import resolves
unchanged.
What is migrated:
- All 12 protocols (vmess/vless/trojan/ss/socks/http/wireguard/
hysteria/freedom/blackhole/dns/loopback)
- Stream tab with TCP/KCP/WS/gRPC/HTTPUpgrade + partial XHTTP
- Security tab with TLS + Reality + Flow gating
- Sockopt + Mux sections (gated by isMuxAllowed)
- JSON tab with bidirectional bridge to form state
- Tag uniqueness check
- VLESS reverse-sniffing slice
- Freedom fragment/noises/finalRules
- DNS rewrite + rules list
- Wireguard peers + nested allowedIPs sub-list
- Wireguard secret/public key regeneration
Deferred to follow-up commits (still accessible via the JSON tab):
- XHTTP advanced fields (xmux, sequence/session placement, padding obfs)
- Hysteria stream transport sub-form
- TCP HTTP camouflage host/path body
- WS/HTTPUpgrade/XHTTP headers map editor
- Remaining sockopt knobs (tcpUserTimeout, tcpcongestion, tcpKeepAliveIdle,
tcpMaxSeg, tcpWindowClamp, V6Only, trustedXForwardedFor, tproxy,
acceptProxyProtocol)
- VLESS Vision testpre/testseed
- Reality API helpers (random target, x25519/mldsa65 generate-import)
- Link import (vmess:// vless:// etc → outbound)
- FinalMaskForm hookup (deferred from inbound rewrite too)
* test(frontend): convert legacy-class parity tests to snapshot baselines
With the inbound/outbound modal rewrites complete, the cross-check
against the legacy Inbound class has served its purpose. The new
pure-function / Zod-schema paths are the source of truth for production
code; the parity assertions were the migration safety net.
Convert the three parity test files to snapshot-based regression tests:
- headers.test.ts: toHeaders + toV2Headers run against snapshots
captured at the close of the migration (when both new and legacy
were verified byte-equal).
- protocol-capabilities.test.ts: 140 cases (10 fixtures × 14 stream
shapes) snapshot the predicate-result tuple. Was: parity vs legacy
Inbound.canEnableX() class methods.
- inbound-link.test.ts: per-protocol genXxxLink + genInboundLinks
orchestrator output is snapshotted. Was: byte-equality vs legacy
Inbound.genXxxLink() methods.
Also delete shadow.test.ts — its purpose was a dual-parse drift
detector (Inbound.Settings.fromJson vs InboundSettingsSchema.parse).
inbound-full.test.ts already snapshots the Zod parse output, which
covers the same ground without the legacy dependency.
models/inbound.ts and models/outbound.ts stay in the tree for now —
DBInbound still consumes Inbound via its toInbound() method, and
DBInbound migration is out of scope per the migration spec
('Do NOT migrate Status, DBInbound, or AllSetting...'). No
production page imports from @/models/inbound or @/models/outbound
directly anymore.
* chore(frontend): enforce no-explicit-any: error + add typecheck/test to CI
Step 7 of the Zod migration: lock the migration's gains in place via
lint + CI enforcement.
- eslint.config.js: `@typescript-eslint/no-explicit-any` set to error.
Verified locally — zero violations in src/, with the only file-level
disables being src/models/inbound.ts and src/models/outbound.ts
(kept for DBInbound's toInbound() consumer; their migration is out
of spec scope).
- .github/workflows/ci.yml: add Typecheck and Test steps to the
frontend job, between Lint and Build. PRs now have to pass
tsc --noEmit and the full vitest suite (285 tests + 172 snapshots)
before build runs.
Migration scoreboard (vs the spec):
Step 1 primitives + barrels done
Step 2 protocol leaf + DUs done
Step 3 pure-fn extraction done
Step 4 form modals -> Pattern A done (Inbound + Outbound)
Step 5 delete models/ files DEFERRED (DBInbound still uses
Inbound; spec marks DBInbound
migration out of scope)
Step 6 tighten .loose() / unknown DEFERRED (invasive, separate PR)
Step 7 lint + CI enforcement done (this commit)
Production code paths now have no direct dependency on the legacy
Inbound or Outbound classes.
* feat(frontend): OutboundFormModal deferred features (Vision seed / TCP host+path / WG pubKey derive)
Three small wins from the post-atomic-swap deferred list:
- VLESS Vision testpre + testseed: shown only when flow ===
'xtls-rprx-vision' (mirrors the legacy canEnableVisionSeed gate).
testseed binds to a Select mode='tags' with a normalize() that
coerces strings to positive integers and drops invalid entries.
- TCP HTTP camouflage host + path: when the TCP HTTP camouflage
Switch is on, surface two inputs that read/write directly into
streamSettings.tcpSettings.header.request.headers.Host and .path.
Both fields are string[] on the wire; normalize + getValueProps
translate to/from comma-joined strings in the UI (one entry per
host or path the user wants camouflaged).
- Wireguard pubKey auto-derive: Form.useWatch on settings.secretKey
+ useEffect that runs Wireguard.generateKeypair(secret).publicKey
on every change and writes the result into the disabled pubKey
display field. Matches the legacy modal's per-keystroke derive.
* feat(frontend): symmetric TCP HTTP host/path + extra sockopt knobs
OutboundFormModal:
- Sockopt section gains 5 common-but-rarely-tweaked knobs:
acceptProxyProtocol, tproxy (off/redirect/tproxy), tcpcongestion
(bbr/cubic/reno), V6Only, tcpUserTimeout. The remaining sockopt
fields (tcpKeepAliveIdle, tcpMaxSeg, tcpWindowClamp,
trustedXForwardedFor) are still edit-via-JSON; they are deeply
tunable and not commonly touched.
InboundFormModal:
- TCP HTTP camouflage gains host + path inputs symmetric to the
outbound side. Switch ON seeds request with sensible defaults
(version 1.1, method GET, path ['/'], empty headers). The two
inputs use the same normalize/getValueProps comma-string ↔
string[] dance the outbound side uses, so the wire shape stays
identical to what xray-core expects.
* feat(frontend): HeaderMapEditor reusable component + wire WS/HTTPUpgrade headers
Add a single reusable header-map editor that handles the two wire
shapes Xray uses:
- v1: { name: 'value' } — used by WS / HTTPUpgrade / Hysteria
masquerade. One value per name.
- v2: { name: ['value1', 'value2'] } — used by TCP HTTP camouflage.
Each header can repeat (RFC 7230 §3.2.2).
Internal state is always a flat list of {name, value} rows regardless
of mode; conversion to/from the wire shape happens at the value /
onChange boundary so consumers bind straight to a Form.Item with no
extra transforms.
Wired into:
- InboundFormModal: WS Headers, HTTPUpgrade Headers
- OutboundFormModal: WS Headers, HTTPUpgrade Headers
XHTTP headers are already in a list-of-rows wire shape (different
from these two), so they keep their bespoke editor. Hysteria
masquerade is still deferred until the Hysteria stream sub-form
lands.
* feat(frontend): Hysteria stream sub-form (schema branch + outbound UI)
Add the 7th branch to NetworkSettingsSchema for Hysteria transport.
schemas/protocols/stream/hysteria.ts:
- HysteriaStreamSettingsSchema covers the full wire shape: version=2,
auth, congestion (''|'brutal'), up/down bandwidth strings, optional
udphop sub-object for port-hopping, receive-window tuning fields,
maxIdleTimeout, keepAlivePeriod, disablePathMTUDiscovery.
schemas/protocols/stream/index.ts:
- NetworkSchema gains 'hysteria'.
- NetworkSettingsSchema gains the 7th branch
{ network: 'hysteria', hysteriaSettings: HysteriaStreamSettingsSchema }.
OutboundFormModal.tsx:
- NETWORK_OPTIONS keeps the 6 standard transports for non-hysteria
protocols; when protocol === 'hysteria', a 7th option is appended
(matches the legacy [...NETWORKS, 'hysteria'] gate).
- newStreamSlice handles the 'hysteria' case with sensible defaults
matching the legacy HysteriaStreamSettings constructor.
- New sub-form when network === 'hysteria': 8 common fields (auth,
congestion, up, down, udphop Switch + 3 nested fields when on,
maxIdleTimeout, keepAlivePeriod, disablePathMTUDiscovery).
- Receive-window tuning fields are still edit-via-JSON (rarely
touched + would clutter the form).
* feat(frontend): fallbacks polish — move up/down + Add all button
Two small UX wins on the InboundFormModal Fallbacks card:
- Per-row Move up / Move down buttons (ArrowUp/Down icons) that swap
adjacent indices. Order survives reloads via sortOrder (rebuilt from
index on save). First row's Up button + last row's Down button are
disabled.
- 'Add all' button next to 'Add fallback' that one-shot inserts a
fresh row for every eligible inbound (every option in
fallbackChildOptions) not already wired up. Disabled when every
eligible inbound is already covered. Convenient for operators
running catch-all routing across every host on the panel.
* feat(frontend): XHTTP advanced fields on outbound modal
Replace the 'edit via JSON' deferred-features hint with the full XHTTP
sub-form matching the legacy modal's XhttpFields helper.
schemas/protocols/stream/xhttp.ts:
- New XHttpXmuxSchema: 6 connection-multiplexing knobs
(maxConcurrency, maxConnections, cMaxReuseTimes, hMaxRequestTimes,
hMaxReusableSecs, hKeepAlivePeriod).
- XHttpStreamSettingsSchema gains 5 outbound-only fields and one
UI-only toggle: scMinPostsIntervalMs, uplinkChunkSize, noGRPCHeader,
xmux, enableXmux.
outbound-form-adapter.ts:
- New stripUiOnlyStreamFields() drops xhttpSettings.enableXmux on the
way to wire so the panel never embeds the UI toggle into the saved
config. xray-core ignores unknown fields anyway, but the panel reads
back its own emitted JSON, so a clean wire shape matters.
OutboundFormModal.tsx:
- Headers editor (HeaderMapEditor v1) for xhttpSettings.headers.
- Padding obfs Switch + 4 conditional fields (key/header/placement/
method) when on.
- Uplink HTTP method Select with GET disabled outside packet-up.
- Session placement + session key (key shown when placement != path).
- Sequence placement + sequence key (same pattern).
- packet-up mode: scMinPostsIntervalMs, scMaxEachPostBytes, uplink
data placement + key + chunk size (key/chunk-size shown when
placement != body).
- stream-up / stream-one mode: noGRPCHeader Switch.
- XMUX Switch + 6 nested fields when on.
* feat(frontend): inbound TCP HTTP camouflage response fields + request headers
Complete the TCP HTTP camouflage UI on the inbound side.
Already there from the previous symmetric host/path commit:
- Request host (string[] via comma-string)
- Request path (string[] via comma-string)
This commit adds:
- Request headers (V2 map: name -> string[]) via HeaderMapEditor.
- Response version (defaults to '1.1' when camouflage toggles on).
- Response status (defaults to '200').
- Response reason (defaults to 'OK').
- Response headers (V2 map) via HeaderMapEditor.
The HTTP camouflage Switch seeds both request and response sub-objects
on toggle-on so xray-core sees a valid TcpHeader.http shape from the
first save. Without the response seed, partial fills would emit a
schema-incomplete response block that xray-core might reject.
* feat(frontend): link import on outbound modal (vmess/vless/trojan/ss/hy2)
The legacy outbound modal could import a vmess://, vless://, trojan://,
ss://, or hysteria2:// share link via a Convert button on the JSON
tab. Restore that UX with a focused pure-function parser.
lib/xray/outbound-link-parser.ts:
- parseVmessLink: base64 JSON, maps net/tls + per-network params onto
the discriminated stream branch.
- parseVlessLink: standard URL with type/security/sni/pbk/sid/fp/flow
query params, dispatches transport via buildStream + applies
security params via applySecurityParams.
- parseTrojanLink: same URL pattern, defaults security to tls.
- parseShadowsocksLink: both modern (base64 userinfo@host:port) and
legacy (base64 of whole thing) ss:// formats.
- parseHysteria2Link: accepts both hysteria2:// and hy2:// schemes,
uses the hysteria stream branch with version=2 + TLS h3.
- parseOutboundLink dispatcher returns the first non-null parser
result, or null when no scheme matches.
test/outbound-link-parser.test.ts:
- 13 cases covering happy paths for each protocol family plus malformed
input, ss:// dual-format handling, hy2:// alias.
OutboundFormModal.tsx:
- Import button on the JSON tab Input.Search; on success, parsed
payload flows through rawOutboundToFormValues, the form is reset,
and we switch back to the Basic tab.
- Tag is preserved when the parsed link does not carry one.
Out of scope: advanced fields the legacy parser handled (xmux, padding
obfs, reality short IDs, finalmask from fm= param). Power users can
finish the import in the form after the basics land.
* feat(frontend): inbound Hysteria stream sub-form (auth + udpIdleTimeout + masquerade)
Restore the inbound side of Hysteria stream configuration that was
previously hidden — the legacy modal exposed these knobs but the
Pattern A rewrite gated them out.
schemas/protocols/stream/hysteria.ts:
- HysteriaMasqueradeSchema covers the inbound-only masquerade wire
shape: type ('proxy'|'file'|'string'), dir, url, rewriteHost,
insecure, content, headers, statusCode. The three masquerade types
cover the spectrum: reverse-proxy upstream, serve static files, or
return a fixed string body.
- HysteriaStreamSettingsSchema gains 3 inbound-side optional fields:
protocol, udpIdleTimeout, masquerade. Outbound side is untouched
(the legacy class accepted both wire shapes via the same struct).
InboundFormModal.tsx:
- New hysteria stream sub-form section in streamTab, gated by
protocol === HYSTERIA. Fields: version (disabled, locked to 2),
auth, udpIdleTimeout, masquerade Switch + nested type-Select with
three conditional sub-blocks (proxy URL+rewriteHost+insecure,
file dir, string statusCode+body+headers).
- onValuesChange cascade: switching TO hysteria seeds streamSettings
with the hysteria branch (forcing network='hysteria' + TLS); switching
AWAY from hysteria snaps back to TCP so the standard network
selector has a valid starting point.
masquerade headers use the HeaderMapEditor v1 component.
* feat(frontend): complete outbound sockopt section with remaining knobs
Add the four remaining SockoptStreamSettings fields that were
edit-via-JSON-only after the initial outbound modal rewrite:
- TCP keep-alive idle (s) — tcpKeepAliveIdle, time before sending
the first probe on an idle TCP connection.
- TCP max segment — tcpMaxSeg, override the default MSS.
- TCP window clamp — tcpWindowClamp, cap the TCP receive window.
- Trusted X-Forwarded-For — trustedXForwardedFor, list of trusted
proxy hostnames/CIDRs whose XFF headers Xray will honor.
The outbound sockopt section now exposes all 17 SockoptStreamSettings
fields from the schema. The InboundFormModal's sockopt section has
its own field list (closer to the legacy class) and is unchanged.
* feat(frontend): outbound TCP HTTP camouflage parity with inbound
Add method/version inputs, request header map, and full response
sub-section (version/status/reason/headers) to OutboundFormModal so the
outbound side can configure the same HTTP-1.1 obfuscation knobs the
inbound side already exposed.
* feat(frontend): round-trip XHTTP advanced fields in outbound link parser
Pick up xPaddingBytes, scMaxEachPostBytes, scMinPostsIntervalMs,
uplinkChunkSize, and noGRPCHeader from both vmess:// JSON and the URL
query-param parsers (vless/trojan). The advanced xmux/padding-obfs/
reality-shortId knobs still wait on a follow-up; this slice unblocks
the common case where a phone-issued xhttp link carries non-default
padding or post sizes.
* feat(frontend): round-trip XHTTP padding-obfs + remaining advanced knobs
Extract the XHTTP key-mapping into typed string/number/bool key arrays
applied by both the URL query-param branch and the vmess JSON branch.
The parser now covers xPaddingObfsMode + xPaddingKey/Header/Placement/
Method, sessionKey/seqKey/uplinkData{Placement,Key}, noSSEHeader,
scMaxBufferedPosts, scStreamUpServerSecs, serverMaxHeaderBytes, and
uplinkHTTPMethod alongside the previous five XHTTP fields. Two new
round-trip tests cover the padding-obfs surface on both link forms.
* feat(frontend): FinalMaskForm rewrite to Pattern A + wire into both modals
Rewrite FinalMaskForm.tsx from a class-coupled component (mutated
stream.finalmask.tcp[] via .addTcpMask/.delTcpMask methods, notified
parent via onChange callback) into a Pattern A sub-form: takes a
NamePath base, a FormInstance, and the surrounding network/protocol,
then composes Form.List + Form.Item at absolute paths under that base.
All array structures use nested Form.List — tcp/udp mask arrays, the
clients/servers groups in header-custom (Form.List of Form.List of
ItemEditor), and the noise list. Type Selects use onChange to reset
the settings sub-object via form.setFieldValue, mirroring the legacy
changeMaskType behavior. The kcp.mtu side effect on xdns type change
is preserved.
Wired into both InboundFormModal and OutboundFormModal stream tabs,
placed after the sockopt section. The component is the first Pattern A
consumer of nested Form.List inside another Form.List, so it stands
as the reference for future nested-array sub-forms.
* docs(frontend): record FinalMaskForm rewrite + hookup in status doc
Mainline migration goal — replace class-based xray models with Zod
schemas as the single source of truth + drive all forms through
AntD `Form.useForm` + `antdRule(schema.shape.X)` — is complete.
Remaining items are incremental polish.
* fix(frontend): Phase 2 Inbound form reactivity bugs (B1-B9, consolidated)
A run of resets dropped the per-bug commits 1401d833 / 5b1ae450 /
5bce0dc5 / 4007eec7. Re-landing all fixes against the same files in one
commit to avoid another rebase-style drop.
B1 — Transmission Select / External Proxy + Sockopt switches didn't
react after click. AntD 6.4.3 Form.useWatch on nested paths doesn't
re-fire reliably after `setFieldValue('streamSettings', cleaned)` on
the parent. Bound Transmission via `name={['streamSettings', 'network']}`
and wrapped the two switches in `<Form.Item shouldUpdate>` blocks that
read state via getFieldValue.
B2 — Security regressed from `Radio.Group buttonStyle="solid"` to a
Select dropdown, and disable state didn't refresh because tlsAllowed/
realityAllowed were derived at the top of the component. Restored
Radio.Button group and moved canEnableTls/canEnableReality evaluation
inside the shouldUpdate render prop.
B3 — Advanced tab "All" sub-tab was missing. Added it as the first
item with a new AdvancedAllEditor that round-trips top-level fields +
the three nested slices on edit.
B4 — Advanced tab title/subtitle and per-section help text were gone.
Wrapped the Tabs in the existing `.advanced-shell` / `.advanced-panel`
structure and restored the `.advanced-editor-meta` help under each
sub-tab using existing i18n keys.
B5 — TLS / Reality sub-forms didn't render when selecting tls or
reality on the Security tab. The `{security === 'tls' && ...}` and
`{security === 'reality' && ...}` conditionals used a stale top-level
useWatch value. Wrapped both in <Form.Item shouldUpdate> blocks that
read `security` via getFieldValue.
B6 — Advanced JSON editors stale after Stream/Sniffing changes. The
editors seeded text via lazy useState and AntD Tabs renders all panes
upfront, so the Advanced tab was already mounted with stale data.
Both AdvancedSliceEditor and AdvancedAllEditor now subscribe via
Form.useWatch and re-sync the text buffer when the watched JSON
differs from a lastEmitRef (the serialization at the moment of our
own last accepted write). User typing doesn't trigger re-sync because
setFieldValue updates lastEmitRef too. (A prior attempt added
`destroyOnHidden` to the outer Tabs but broke conditional tab items
when the unmounted Form.Item for `protocol` lost its value —
abandoned in favor of useWatch reactivity.)
B7 — HeaderMapEditor + button did nothing. addRow() appended a blank
{name:'', value:''} row, but commit() filtered it via rowsToMap before
reaching the form, so AntD saw no change and didn't re-render. The
editor now keeps a local rows state so blank rows survive during
editing; only filled rows are emitted to onChange.
B9 — Sniffing destOverride defaults (HTTP/TLS/QUIC/FAKEDNS) were not
pre-checked on a fresh Add Inbound. buildAddModeValues() seeded
sniffing: {} which left destOverride undefined. Now seeds with
SniffingSchema.parse({}) so the Zod defaults populate.
* fix(frontend): FinalMaskForm TCP Mask sub-forms + Advanced JSON wrap (B10/B11)
B10 — FinalMaskForm TCP Mask: after adding a mask and picking a Type
(Fragment/Header Custom/Sudoku), the type-specific sub-forms didn't
render. TcpMaskItem read `type` via Form.useWatch on a path inside
Form.List, which doesn't re-fire reliably in AntD 6.4.3 — same root
cause as the earlier B1/B2/B5 reactivity issues. Replaced with a
<Form.Item shouldUpdate> wrapper that reads `type` via getFieldValue
inside the render prop.
B11 — Advanced sub-tabs (settings / streamSettings / sniffing) showed
just the inner value (e.g. `{clients:[],decryption:"none",...}`), but
the legacy modal wrapped each slice with its key envelope (e.g.
`{settings:{...}}`) so the JSON matches the wire shape's slice and
round-trips cleanly from copy-pasted inbound configs. Added a
`wrapKey` prop to AdvancedSliceEditor that wraps/unwraps the value
on render/write; the three sub-tabs now pass settings / streamSettings
/ sniffing as their wrapKey.
* fix(frontend): import InboundFormModal.css so layout classes apply (B12)
The file InboundFormModal.css existed but was never imported, so every
class in it had no effect — including:
- .vless-auth-state — the "Selected: <auth>" caption next to the X25519/
ML-KEM/Clear button row stayed inline next to Clear instead of
display:block beneath the row
- .advanced-shell / .advanced-panel — the Advanced tab's header / panel
framing was missing
- .advanced-editor-meta — the per-section help text under each Advanced
sub-tab had no spacing
- .wg-peer — wireguard peer rows had no top margin
Add a side-effect import of the CSS file at the top of the modal. No
other change needed; the legacy modal must have either imported it or
had a global import that the new modal didn't inherit.
* fix(frontend): FinalMaskForm relative paths + network-switch defaults (B13/B14)
B13 — FinalMaskForm used absolute paths like
['streamSettings', 'finalmask', 'tcp', 0, 'type'] for Form.Item names
inside Form.List render props. AntD's Form.List prefixes Form.Item
names with the list's own name, so the actual storage path became
['streamSettings', 'finalmask', 'tcp', 'streamSettings', 'finalmask',
'tcp', 0, 'type'] — total nonsense. Symptoms: Type Select didn't show
the 'fragment' default after add(), and the sub-form for the picked
type never rendered (Fragment/Sudoku/HeaderCustom).
Rewrote FinalMaskForm to use RELATIVE names inside every Form.List
context (TCP/UDP outer list + nested clients/servers/noise inner
lists). Added a `listPath` prop on the items so the shouldUpdate
guard and the side-effect setFieldValue calls (resetting `settings`
when type changes) can still address the absolute path; the
displayed Form.Items use the relative form (`[fieldName, 'type']`).
Replaced top-level Form.useWatch on nested paths with
<Form.Item shouldUpdate> blocks reading via getFieldValue, same
pattern as the earlier B5 fix — Form.useWatch on paths inside
Form.List doesn't re-fire reliably in AntD 6.4.3.
B14 — Switching network (KCP, WS, gRPC, XHTTP, ...) seeded the
new XSettings blob as `{}` so every field showed as empty. The
legacy `newStreamSlice` populated mtu=1350, tti=20, etc. Restored
those defaults in onNetworkChange and seeded the initial
tcpSettings.header in buildAddModeValues so even the default TCP
state shows the HTTP-camouflage Switch in the correct off state
instead of an undefined header object.
* fix(frontend): inbound TCP HTTP camouflage drops request fields + KCP UI field rename (B15/B16)
B15 — Inbound TCP HTTP camouflage exposed Host / Path / Method / Version
/ request-headers inputs. Per Xray docs
(https://xtls.github.io/config/transports/raw.html#httpheaderobject),
the `request` object is honored only by outbound proxies; the inbound
listener reads `response`. Those inputs were writing dead data the
server ignored. Removed them from the inbound modal; only Response
{version, status, reason, headers} remain. The toggle still seeds an
empty request object so the wire shape stays valid against the schema.
B16 — KCP Uplink / Downlink inputs bound to non-existent form fields
`upCap` / `downCap`, while the schema (and wire) use `uplinkCapacity` /
`downlinkCapacity`. Renamed the Form.Items to the schema names so
defaults populate and saves persist. Also corrected newStreamSlice('kcp')
to seed the four KCP defaults (uplinkCapacity / downlinkCapacity /
cwndMultiplier / maxSendingWindow) — the missing two were why
"CWND Multiplier" and "Max Sending Window" still showed empty after
switching to KCP.
* fix(frontend): seed full Zod-schema defaults for stream slices + QUIC params (B17)
XHTTP showed blank Selects for Session Placement / Sequence Placement /
Padding Method / Uplink HTTP Method (and several other knobs). Those
fields have a literal "" (empty string) value in the schema, which the
Select renders as "Default (path)" / "Default (repeat-x)" / etc.
The form field was `undefined`, not `""`, so the Select showed blank
instead of the labelled default option.
newStreamSlice in InboundFormModal hand-rolled per-network seed
objects with only a handful of fields. Replaced with
{Tcp,Kcp,Ws,Grpc,HttpUpgrade,XHttp}StreamSettingsSchema.parse({}) so
every default declared in the schema populates the form on network
switch. Same change in buildAddModeValues for the initial TCP state.
QUIC Params (FinalMaskForm) had the same shape on a smaller scale —
defaultQuicParams() only seeded congestion + debug + udpHop. The
schema's other fields are .optional() (no Zod default) so a schema
parse won't help. Hard-coded the xray-core / hysteria recommended
values (maxIdleTimeout 30, keepAlivePeriod 10, brutalUp/Down 0,
maxIncomingStreams 1024, four window sizes) so the InputNumber
controls render with usable starting values instead of blank.
* fix(frontend): forceRender all tabs so fields register at modal open (B18)
AntD Tabs with the `items` API lazy-mounts inactive tab panes by
default. The Form.Items inside an unvisited tab never register, so:
- Form.useWatch on a parent path (e.g. 'sniffing') returns a partial
view containing only registered children. Until the user clicked the
Sniffing tab, Advanced > Sniffing JSON showed `{sniffing: {}}`
instead of the full default object set by setFieldsValue.
- After visiting the Sniffing tab once, the `sniffing.enabled` Form.Item
registered, so useWatch suddenly returned `{enabled: false}` — still
partial, because the rest of the sniffing children only register when
their Form.Items mount in conditional sub-sections.
Setting `forceRender: true` on every tab item forces all tab panes to
mount at modal open. Every Form.Item registers immediately; the watch
result reflects the full form value seeded by buildAddModeValues. This
also likely resolves the earlier "Invalid discriminator value" error
on submit, which surfaced when streamSettings had an unregistered
security field whose Form.Item hadn't mounted yet.
* refactor(frontend): align hysteria with new docs + drop hysteria2 protocol
Phase 2 smoke fixes on the Inbound add flow surfaced that hysteria2 was
modeled as a separate top-level protocol when it's really just hysteria
v2. The xray transports/hysteria.html docs also pin the hysteria stream
to a minimal shape (version/auth/udpIdleTimeout/masquerade) — the
previous schema carried legacy congestion/up/down/udphop/window knobs
that aren't part of the wire contract.
Hysteria2 removal:
- Drop 'hysteria2' from ProtocolSchema enum and Protocols const
- Drop hysteria2 branches from inbound/outbound discriminated unions
- Drop createDefaultHysteria2InboundSettings / OutboundSettings
- Delete schemas/protocols/inbound/hysteria2.ts and outbound/hysteria2.ts
- Drop hysteria2 case in getInboundClients / genLink (fell through to
the hysteria handler anyway)
- Update client form modals' MULTI_CLIENT_PROTOCOLS sets
- Remove hysteria2-basic fixture + snapshot entries (14 capability
cases, 1 protocols fixture, 1 inbound-defaults factory)
- Keep parseHysteria2Link() outbound parser since hysteria2:// is the
share-link URI prefix for hysteria v2
Hysteria stream alignment with xtls docs:
- HysteriaStreamSettingsSchema reduced to version/auth/udpIdleTimeout/
masquerade per transports/hysteria.html
- Masquerade type adds '' (default 404 page) and defaults to it
- Outbound form drops Congestion/Upload/Download/UDP hop/Max idle/
Keep alive/Disable Path MTU controls and the receive-window note
- newStreamSlice('hysteria') in OutboundFormModal mirrors the trimmed
shape; outbound-link-parser emits the trimmed shape too
- InboundFormModal Masquerade Select gains the default option
New TUN inbound schema:
- Add schemas/protocols/inbound/tun.ts with name/mtu/gateway/dns/
userLevel/autoSystemRoutingTable/autoOutboundsInterface
- Wire into ProtocolSchema enum, InboundSettingsSchema discriminated
union, createDefaultInboundSettings dispatcher
Other Phase 2 smoke fixes folded in:
- Tunnel portMap UI swaps Form.List for HeaderMapEditor v1 — wire
shape is Record<string,string> and the List was producing arrays
- Hysteria onValuesChange seeds full TLS schema defaults + one
empty certificate row (Cipher Suites/Min/Max Version/uTLS/ALPN
were undefined before)
- HTTP/Mixed accounts Add button auto-fills user/pass with
RandomUtil.randomLowerAndNum
- Hysteria security tab gates the 'none' radio out — TLS only
- Hysteria stream tab drops the inbound Auth password field (xray
inbound auth is per-user via 'users', not stream-level)
- Reality onSecurityChange auto-randomizes target/serverNames/
shortIds and fetches an X25519 keypair
- Tag and DB-side fields (up/down/total/expiryTime/
lastTrafficResetTime/clientStats/security) gain hidden Form.Items
so validateFields keeps them in the wire payload (rc-component
form strips unregistered fields)
- WireGuard inbound auto-seeds one peer with generated keypair,
allowedIPs ['10.0.0.2/32'], keepAlive 0 — matches legacy
- WireGuard peer rows separated by Divider with the Peer N title
and a small inline remove button (titlePlacement="center")
* refactor(frontend): retire class-based xray models (Step 5)
Delete models/inbound.ts (3,359 lines) and outbound.ts (2,405).
The Inbound/Outbound classes and ~50 sub-classes are replaced by
Zod-typed data + pure functions in lib/xray/*.
Consumer migration off dbInbound.toInbound():
- useInbounds: isSSMultiUser({protocol, settings}) directly
- QrCodeModal: genWireguardConfigs/Links/AllLinks from lib/xray
- InboundList: derives tags from streamSettings raw fields
- InboundsPage: clone via raw JSON, fallback projection via
schema-shape stream object, exports via genInboundLinks
- InboundInfoModal: builds an InboundInfo facade locally from
raw streamSettings (host/path/serverName/serviceName per
network), canEnableTlsFlow + isSS2022 from lib/xray
New helper: lib/xray/inbound-from-db.ts exposes
inboundFromDb(raw) converting a raw DBInbound row into a
schema-typed Inbound for the link-generation orchestrators.
DBInbound trimmed: drops toInbound, isMultiUser, hasLink,
genInboundLinks, _cachedInbound. Imports Protocols from
@/schemas/primitives now that ./inbound is gone.
Bundled Phase 2 fixes:
- Outbound modal: Form.useWatch with preserve: true so the
stream block doesn't gate itself out when network is unmounted
- Inbound form adapter: pruneEmpty preserves empty objects;
per-protocol client field projection via Zod safeParse;
sniffing collapse to {enabled:false}
- useClients invalidateAll also invalidates inbounds.root()
- IndexPage Config modal top/maxHeight polish
Tests: 283/283 pass. typecheck/lint clean.
* fix(frontend): inboundFromDb fills Zod defaults for stream + settings
Smoke-testing the new inboundFromDb helper surfaced two regressions
that the strict lib/xray link generators expose when fed raw DB
streamSettings without per-network sub-keys.
1. genVlessLink / genTrojanLink crash on `stream.tcpSettings.header`
when streamSettings lacks `tcpSettings` (true for slim list rows
and for handcrafted minimal-JSON inbounds). The legacy
Inbound.fromJson chain populated TcpStreamSettings via its own
constructor; the new helper now does the same by parsing the raw
<network>Settings sub-object through the matching Zod schema and
merging schema defaults onto whatever the DB stored.
2. genVlessLink writes `encryption=undefined` into the share URL
when settings lacks the `encryption: 'none'` literal that vless
wire JSON normally carries. Fixed by running raw settings through
InboundSettingsSchema.safeParse() to populate per-protocol
defaults (encryption, decryption, fallbacks, etc.) the same way
the legacy class fromJson chain did.
Same pattern applied to security branch (tls/realitySettings).
Tests: src/test/inbound-from-db.test.ts covers
- JSON-string / object / empty settings coercion
- genInboundLinks vless (TCP/none, with encryption=none)
- genWireguardConfigs + genWireguardLinks peer fanout
- genAllLinks trojan with TLS sub-defaults applied
- protocol-capability helpers with raw shapes
- getInboundClients across vless/SS-single/non-client protocols
296/296 pass.
* fix(frontend): QUIC udpHop.interval is a range string, not a number (B19)
User report: "streamSettings.finalmask.quicParams.udpHop.interval:
Invalid input: expected string, received number".
Three-part fix:
- FinalMaskForm: Hop Interval input changed from InputNumber to
Input with "e.g. 5-10" placeholder. xray-core spec says interval
is a range string like '5-10' (seconds between min-max hops),
not a single number.
- FinalMaskForm: defaultQuicParams() seeds interval: '5-10' instead
of the broken `interval: 5`.
- QuicUdpHopSchema: preprocess coerces number → string for legacy
DB rows that were written by the now-fixed buggy UI. Stops the
load-time validation crash on existing inbounds.
Tests still 296/296.
* fix(frontend): outbound link parser handles extra/fm/x_padding_bytes (B20)
User-reported vless share link with full xhttp + reality + finalmask
config failed to round-trip on outbound import. The inbound link
generator emits three payloads the outbound parser was ignoring:
1. `extra=<json>` — bundles advanced xhttp knobs (xPaddingBytes,
scMaxEachPostBytes, scMinPostsIntervalMs, padding-obfs keys,
etc.). applyXhttpStringFromParams now JSON.parses this and
merges the fields into xhttpSettings via the same JSON-branch
logic used by vmess.
2. `x_padding_bytes=<range>` — snake_case alias the inbound emits
alongside the camelCase form. Now applied before camelCase so
explicit `xPaddingBytes` URL params still win.
3. `fm=<json>` — full finalmask object including quicParams.udpHop
and tcp/udp mask arrays. New applyFinalMaskParam attaches the
decoded object to streamSettings.finalmask. Wired into both
parseVlessLink and parseTrojanLink.
Tests:
- Real B20 link parses with xhttp + reality + finalmask all populated
- Precedence: camelCase URL > extra JSON > snake_case alias > default
- Malformed extra JSON falls through without crashing the parser
300/300 pass.
* fix(frontend): Outbound submit crash on non-mux protocols + tab a11y (B21)
Two issues surfaced on Outbound save:
1. Crash: `Cannot read properties of undefined (reading 'enabled')` at
formValuesToWirePayload. The modal hides the Mux switch entirely
for non-stream protocols (dns/freedom/blackhole/loopback) and for
stream protocols when isMuxAllowed gates it out (xhttp, vless+flow).
With the field never registered, validateFields() returns no `mux`
key — `values.mux.enabled` then dereferences undefined.
Fix: optional chain `values.mux?.enabled` so missing mux skips the
mux clause silently. Documented why mux can be absent.
2. Chrome a11y warning: "Blocked aria-hidden on an element because its
descendant retained focus" — when the user has an input focused
inside one Tab panel and switches to another tab, AntD marks the
outgoing panel aria-hidden while focus is still inside. The browser
warns, but the focused control is now invisible to AT users.
Fix: blur the active element before setActiveKey in onTabChange.
* fix(frontend): blur active element on every tab switch path (B21 follow-up)
The previous B21 patch only blurred on user-initiated tab clicks via
onTabChange. Two other paths still set activeKey while a JSON-tab
input retained focus:
- importLink: after a successful share-link parse, setActiveKey('1')
switched to the form tab while the user's focus was still on the
Input.Search they just pressed Enter in. Chrome logged the same
"Blocked aria-hidden" warning because the panel they were leaving
became aria-hidden synchronously, with their input still focused.
- onTabChange entering the JSON tab: also did a bare setActiveKey
with no blur, so going from a focused form input INTO the JSON
tab could trip the warning in reverse.
Fix: centralized switchTab(key) that blurs document.activeElement
sync before calling setActiveKey. Every internal tab transition
(importLink, onTabChange both directions) now routes through it.
The single setActiveKey('1') in the open-modal useEffect is left as
a plain setter because there's no focused input at modal-open time.
* refactor(frontend): extract fillStreamDefaults to shared helper
Move the network/security schema-default filler out of inbound-from-db.ts
into stream-defaults.ts so other consumers can reuse it without dragging
in the DBInbound-specific code path.
* fix(frontend): derive QUIC/UDP-hop switch state from data presence (B22)
The QUIC Params and UDP Hop toggles previously persisted as separate
boolean flags (enableQuicParams / hasUdpHop) which weren't part of the
xray wire format and weren't restored when a config was pasted into the
modal. Use data presence as the single source of truth: the switch is
on iff the corresponding sub-object exists. Switching off clears it
back to undefined.
* fix(frontend): xhttp form binding + drop empty strings from JSON (B23)
uplinkHTTPMethod was wrapped Form.Item -> Form.Item(shouldUpdate) ->
Select, which broke AntD's value/onChange injection (AntD only clones
the immediate child). Restructured so shouldUpdate is the outer wrapper
and Form.Item(name) directly wraps the Select.
Also drop empty-string fields from xhttpSettings in the wire payload —
fields like uplinkHTTPMethod, sessionPlacement, seqPlacement,
xPaddingKey default to '' meaning "use server default", so they
shouldn't appear in JSON as "field": "".
Adds placeholder text to the 3 xhttp Selects so the form reflects the
current value after JSON paste.
* feat(frontend): align finalmask + sockopt with xray docs, add golden fixtures
Schema fixes per https://xtls.github.io/config/transports/finalmask.html
and https://xtls.github.io/config/transports/sockopt.html:
finalmask:
- QuicCongestionSchema: remove non-doc 'cubic', keep reno/bbr/brutal/force-brutal
- Add BbrProfileSchema (conservative/standard/aggressive) and bbrProfile field
- brutalUp/brutalDown: number -> string per docs (units like '60 mbps')
- Tighten ranges: maxIdleTimeout 4-120, keepAlivePeriod 2-60, maxIncomingStreams min 8
- UdpMaskTypeSchema: add missing 'sudoku'
- udpHop.interval stays as preprocessed string-range per intentional B19 divergence
sockopt:
- tcpFastOpen: boolean -> union(boolean, number) per docs (number tunes queue size)
- mark: drop min(0) (can be any int)
- domainStrategy default: 'UseIP' -> 'AsIs' per docs
- tcpKeepAlive Interval/Idle defaults: 0/300 -> 45/45 per docs (outbound)
- Add AddressPortStrategySchema enum (7 values) + addressPortStrategy field
- Add HappyEyeballsSchema (tryDelayMs/prioritizeIPv6/interleave/maxConcurrentTry)
- Add CustomSockoptSchema (system/type/level/opt/value) + customSockopt array
Bug fixes:
- options.ts: Address_Port_Strategy values were lowercase ('srvportonly');
xray-core requires camelCase ('SrvPortOnly'). Fixed all 6 entries.
- OutboundFormModal: domainStrategy Select was mistakenly populated from
ADDRESS_PORT_STRATEGY_OPTIONS; now uses DOMAIN_STRATEGY_OPTION.
- OutboundFormModal: inline sockopt defaults (hardcoded {acceptProxyProtocol:
false, domainStrategy: 'UseIP', ...}) replaced with
SockoptStreamSettingsSchema.parse({}) so schema is the single source.
Form additions (both InboundFormModal + OutboundFormModal):
- Address+port strategy Select
- Happy Eyeballs Switch + sub-form (tryDelayMs/prioritizeIPv6/interleave/maxConcurrentTry)
- Custom sockopt Form.List (system/type/level/opt/value)
- FinalMaskForm: BBR Profile Select (visible when congestion='bbr'),
Brutal Up/Down placeholders updated to string format
Golden fixtures (8 new + 4 xhttp extras):
- finalmask/{tcp-mask, udp-mask, quic-params, combined}.json — cover all TCP
mask types, 7 UDP mask types including new sudoku, full QUIC params shape
- sockopt/{defaults, tcp-tuning, tproxy, full}.json — full sockopt knobs
- stream/xhttp-{basic, extra-padding, extra-placement, extra-tuning}.json —
cover the extra-blob fields bundled into share-link extra=<json>
Tests now at 312 (up from 300); typecheck/lint clean.
* feat(frontend): migrate DNS + Routing to Zod, align with xray docs
Adds first-class Zod schemas for the xray-core DNS block and routing
sub-objects (Balancer, Rule) matching the documented shape at
https://xtls.github.io/config/dns.html and
https://xtls.github.io/config/routing.html, then wires the
DnsServerModal and BalancerFormModal up to those schemas.
schemas/dns.ts (new):
- DnsQueryStrategySchema enum (UseIP/UseIPv4/UseIPv6/UseSystem)
- DnsHostsSchema record(string -> string | string[])
- DnsServerObjectInnerSchema + DnsServerObjectSchema (with preprocess
to migrate legacy `expectIPs` -> `expectedIPs` alias)
- DnsServerEntrySchema = string | DnsServerObject (xray accepts both)
- DnsObjectSchema with all documented fields and defaults
schemas/routing.ts (new):
- RuleProtocolSchema enum (http/tls/quic/bittorrent)
- RuleWebhookSchema (url/deduplication/headers)
- RuleObjectSchema covering every documented field (domain/ip/port/
sourcePort/localPort/network/sourceIP/localIP/user/vlessRoute/
inboundTag/protocol/attrs/process/outboundTag/balancerTag/ruleTag/
webhook) with type=literal('field').default('field')
- BalancerStrategyTypeSchema enum (random/roundRobin/leastPing/leastLoad)
- BalancerCostObjectSchema {regexp,match,value}
- BalancerStrategySettingsSchema (expected/maxRTT/tolerance/baselines/costs)
- BalancerStrategySchema + BalancerObjectSchema
schemas/xray.ts:
- routing.rules: was loose 3-field object, now z.array(RuleObjectSchema)
- routing.balancers: was z.array(z.unknown()), now z.array(BalancerObjectSchema)
- dns: was 2-field loose, now full DnsObjectSchema
- BalancerFormSchema: strategy now BalancerStrategyTypeSchema (enum)
instead of z.string(); fallbackTag defaults to ''; settings? added
for leastLoad
DnsServerModal (full Pattern A rewrite):
- useState/DnsForm interface -> Form.useForm<DnsServerForm>()
- manual domain/expectedIP/unexpectedIP list -> Form.List
- antdRule on address/port/timeoutMs for inline validation
- preserves legacy collapse-to-bare-string behavior on submit
BalancerFormModal:
- Adds conditional leastLoad sub-form (Expected/MaxRTT/Tolerance/
Baselines/Costs) wired to BalancerStrategySettingsSchema
- Strategy options derived from schema enum
- Cost rows with regexp/literal switch + match + value
- required prop on Tag and Selector for red asterisk visual
BalancersTab:
- BalancerRecord interface -> type alias to BalancerObject
- onConfirm now propagates strategy.settings to wire when leastLoad
- Removes useMemo wrapping `columns` array. The memo had deps
[t, isMobile] (with an eslint-disable) so the column render
functions kept their original closure over `openEdit`. Once a
balancer was created and the user clicked the edit button, the
stale openEdit fired with empty `rows`, so rows[idx] was undefined
and the modal opened blank. Columns are cheap to rebuild each
render, so dropping the memo is the right fix.
DnsTab + RoutingTab: switch ad-hoc interfaces to schema-derived types.
translations (en-US, fa-IR): add the previously-missing
pages.xray.balancerTagRequired and pages.xray.balancerSelectorRequired
keys so antdRule surfaces a real message instead of the raw i18n key.
* test(frontend): golden fixtures for DNS, Balancer, Rule schemas
Adds JSON fixtures under golden/fixtures/{dns,dns-server,balancer,rule}
plus three vitest files that parse them through the new schemas and
snapshot the result.
dns/: minimal (servers as strings) + full (every top-level field plus
hosts with geosite/domain/full prefixes and 5 mixed string/object
servers covering fakedns, localhost, https://, tcp://, quic+local://).
dns-server/: full (every DnsServerObject field) + legacy-expectips
(asserts the z.preprocess that migrates the legacy `expectIPs` key
into the canonical `expectedIPs`).
balancer/: random-minimal (default strategy by omission), roundrobin,
leastping, leastload-full (covers all StrategySettings fields and both
regexp=true|false costs).
rule/: minimal, full (exercises every RuleObject field including
localPort, localIP, process aliases like `self/`, all four protocol
enum values, ip negation `!geoip:`, attrs with regexp value, and the
WebhookObject with deduplication+headers), balancer-routed (uses
balancerTag instead of outboundTag), port-number (port as a number to
prove the union(number,string) accepts both).
* fix(frontend): serialize bulk client delete + drop deprecated Alert.message
useClients.removeMany was firing all DELETEs in parallel via Promise.all.
The 3x-ui backend mutates a single config JSON per request (read /
modify / write), so 20 concurrent deletes raced on the same file: every
request reported success, but only the last writer's copy stuck — about
half the selected clients reappeared after the toast. Replace the
parallel fan-out with a sequential for-of loop so each delete sees the
committed state of the previous one. The trade-off is total latency
(20 * ~250ms = ~5s) which is the correct behavior until the backend
grows a proper /bulkDel endpoint.
Also rename the Alert `message` prop to `title` in
ClientBulkAdjustModal to clear the AntD v6 deprecation warning.
* feat(clients): server-side bulk create/delete with per-inbound batching
Replace the panel-side fan-out (Promise.all of single /add and /del
calls) that raced on the shared inbound config and capped throughput at
roughly one round-trip per client. New endpoints batch the work on the
server:
- POST /panel/api/clients/bulkDel { emails, keepTraffic }
- POST /panel/api/clients/bulkCreate [ {client, inboundIds}, ... ]
BulkDelete groups emails by inbound and performs a single
read-modify-write per inbound (one JSON parse, one marshal, one Save)
instead of N. Per-row DB cleanups (ClientInbound, ClientTraffic,
InboundClientIps, ClientRecord) are batched with WHERE...IN queries.
Per-email failures are reported via Skipped[] and processing continues.
BulkCreate iterates payloads sequentially through the same Create path
single-add uses, so heterogeneous batches (different inboundIds, plans)
remain valid in one round-trip.
Frontend bulkDelete/bulkCreate hooks parse the new response shape
({ deleted|created, skipped[] }) and the bulk-add modal now posts a
single request instead of fanning out emails.
* perf(clients): batch BulkAdjust per inbound, skip no-op xray calls on local
Same per-inbound batching strategy as BulkDelete. The previous code
called Update once per email, which itself looped through each inbound
the client belonged to — reparsing the same settings JSON, calling
RemoveUser+AddUser on xray, and running SyncInbound for every single
email. For 200 emails in one inbound that's 200 JSON read/write cycles
and 400 xray runtime calls.
The new BulkAdjust groups emails by inbound and per inbound:
- locks once, reads settings JSON once
- mutates expiryTime/totalGB in place for every target client
- writes the inbound and runs SyncInbound once
ClientTraffic rows are updated with a single per-email query at the end
(values differ per client so they can't be folded into one statement).
For local-node inbounds the xray runtime calls are skipped entirely.
The AddUser payload only contains email/id/security/flow/auth/password/
cipher — none of which change in an adjust — so RemoveUser+AddUser was
a no-op that briefly flapped active users. Limit enforcement is driven
by the panel's traffic loop reading ClientTraffic, not by xray-core.
For remote-node inbounds rt.UpdateUser is preserved so the remote panel
receives the new totals/expiry.
Skip+report semantics match BulkDelete: any per-email error leaves that
email's record/traffic untouched and is returned in Skipped[].
* refactor(backend): retire hysteria2 as a top-level protocol
Hysteria v2 is not a separate xray protocol — it is plain "hysteria"
with streamSettings.version = 2. The frontend already dropped hysteria2
from the protocol enum in 5a90f7e3; the backend was still carrying the
literal as a compat alias.
Removed:
- model.Hysteria2 constant
- model.IsHysteria helper (only callers were buildProxy + genHysteriaLink)
- TestIsHysteria
- "hysteria2" from the Inbound.Protocol validate oneof enum
- All `case model.Hysteria, model.Hysteria2:` and `case "hysteria",
"hysteria2":` branches across client.go, inbound.go, outbound.go,
xray.go, port_conflict.go, xray/api.go, subService.go,
subJsonService.go, subClashService.go
- Stale #4081 comments
Kept (correctly — these are client-side URI/config schemes that are
independent of the xray protocol type):
- hysteria2:// share-link URI in subService.genHysteriaLink
- "hysteria2" Clash proxy type in subClashService.buildHysteriaProxy
- Comments referring to Hysteria v2 as a transport version
Note: this change does not include a DB migration. Existing rows with
protocol = 'hysteria2' will fall through to the default switch arms
after upgrade. A separate `UPDATE inbounds SET protocol = 'hysteria'
WHERE protocol = 'hysteria2'` is required for installs that still hold
legacy data.
* refactor(frontend): retire all AntD + Zod deprecations
Swept the codebase for @deprecated APIs using a one-off
type-aware ESLint config (eslint.deprecated.config.js) and
fixed every hit:
- 78 instances of `<Select.Option>` JSX in InboundFormModal,
LogModal, XrayLogModal converted to the `options` prop.
- Zod's `z.ZodTypeAny` (deprecated for `z.ZodType` in zod v4)
replaced in _envelope.ts, zodForm.ts, zodValidate.ts, and
inbound-form-adapter.ts.
- Select's `filterOption` / `optionFilterProp` props (now under
`showSearch` as an object) updated in ClientBulkAddModal,
ClientFormModal, ClientsPage, InboundFormModal, NordModal.
- `Input.Group compact` swapped for `Space.Compact` in
FinalMaskForm.
- Alert's standalone `onClose` moved into `closable={{ onClose }}`
on SettingsPage.
- `document.execCommand('copy')` in the legacy clipboard fallback
is routed through a dynamic property lookup so the @deprecated
tag doesn't surface. The fallback itself stays because it's the
only copy path that works in insecure contexts (HTTP+IP panels).
The dropped ClientFormModal.css was already unimported.
eslint.deprecated.config.js loads the type-aware ruleset and
turns everything off except `@typescript-eslint/no-deprecated`,
so future scans are a single command:
npx eslint --config eslint.deprecated.config.js src
Not wired into `npm run lint` because typed linting roughly
triples the run time. Verified clean: typecheck, lint, and the
deprecated scan all 0 warnings.
* feat(clients): show comment under email in the Client column
The clients table's Client cell already stacks email + subId; add
the admin comment as a third muted line so notes like "VIP" or
"friend of X" are visible in the list view without opening the
info modal. Renders only when set, so rows without a comment look
unchanged.
* docs(frontend): refresh README + simplify deprecated-scan config
README rewrite reflects the post-Zod-migration state:
- 3 Vite entries (index/login/subpage), not "one per panel route"
- New folders: schemas/, lib/xray/, generated/, test/, layouts/
- Scripts table covers test/gen:api/gen:zod alongside the existing
dev/build/lint/typecheck
- New sections on the Zod schema tree, the three validation layers,
the unified Form.useForm + antdRule pattern, and the golden
fixture testing setup
- "Adding a new page" updated to reflect that most additions are
just react-router entries in routes.tsx, not new Vite bundles
- Explicit note that `@deprecated` in the prose is a JSDoc tag, not
a shell command — comes with the exact one-line npx invocation
eslint.deprecated.config.js trimmed: dropping the
recommendedTypeChecked spread + the ~28 rule overrides that came
with it. The config now wires the @typescript-eslint and
react-hooks plugins manually and enables exactly one rule
(`@typescript-eslint/no-deprecated`). 45 lines → 30, same output:
zero false-positives, zero noise, zero deprecations on the current
tree.
* chore(frontend): bump deps + refresh lockfile
`npm update` within the existing semver ranges, plus a Vite bump
the user explicitly accepted:
- vite 8.0.13 → 8.0.14 (exact pin kept)
- dayjs 1.11.20 → 1.11.21
- i18next 26.2.0 → 26.3.0
- typescript-eslint 8.59.4 → 8.60.0
- @rc-component/table + a handful of other transitive antd deps
resolved to newer patch versions in the lockfile
The earlier 8.0.13 pin was carried over from an esbuild
dep-optimizer regression that broke vue-i18n in Vite 8.0.14 dev
mode. This codebase uses react-i18next, doesn't hit the same
chunking edge case, and `npm run dev` was smoked clean on
8.0.14 before accepting the bump.
* feat(clients): compact link + inbound rows in the info modal and table
ClientInfoModal — Copy URL section reskinned:
- Each link is a single row: [PROTOCOL] [remark] [copy] [QR]
instead of a card with the raw 200-char URL printed inline
- Remark is parsed per-protocol — VMess pulls it from the
base64-JSON `ps` field, the rest from the `#fragment`
- The row title strips the client email suffix so the same
string isn't repeated three times in the modal; the QR
popover still uses the full remark (it's the QR's own name
for the download file)
- QR button opens an inline Popover with the existing QrPanel,
size 220, destroyed on close
- Subscription section uses the same row layout (SUB / JSON
tags, clickable subId, copy + QR actions)
- New per-protocol Tag colors so the protocol is identifiable
at a glance
ClientInfoModal — Attached inbounds + ClientsPage table column:
- Chip format changed from `${remark} (${proto}:${port})` to
just `${proto}:${port}` — when an admin attaches 5 inbounds
to one client the remark was repeated 5 times and wrapped onto
two lines
- Only the first inbound chip is shown; the rest collapse into
a `+N` chip that opens a Popover with the full list (remark
included). INBOUND_CHIP_LIMIT = 1
- Per-protocol Tag colors
- Tooltip on each chip shows the full `${remark}
(${proto}:${port})`
- Table column pinned to width: 170 so the row doesn't reserve
the old 300px of whitespace next to the compact chip
Comment row in the info table is always shown now (renders `-`
when unset) so the layout doesn't jump per-client.
VmessSecuritySchema gets a preprocess pass that maps legacy
`security: ""` (persisted on pre-enum-lock VMess inbounds) back
to `'auto'`. z.enum's `.default()` only fires on a missing
field, not on an empty string — without this, old rows fail
validation with "expected one of aes-128-gcm|chacha20-poly1305|
auto|none|zero". `z.infer` is taken from the raw enum so the
inferred type stays the union, not `unknown`.
i18n adds a `more` key (en-US + fa-IR) used by the overflow
chip label.
* fix(xray): heal shadowsocks per-client method across all start paths
xray-core's multi-user shadowsocks insists the per-client `method` matches
the inbound's top-level cipher exactly for legacy ciphers, and is empty for
2022-blake3-*. The previous code (xray.go) copied `Client.Security` into
the per-client `method` blindly, so a multi-protocol client created with
the VMess default `"auto"` poisoned the SS config with `method: "auto"` →
"unsupported cipher method: auto".
Fix in two parts:
- GetXrayConfig no longer projects `Client.Security` into the SS entry;
the inbound's top-level method is now the single source of truth.
- HealShadowsocksClientMethods moves to `database/model` and is invoked
from `Inbound.GenXrayInboundConfig`, so the runtime add/update path
(runtime.AddInbound) is normalised in addition to the full-restart
path. For legacy ciphers heal now overwrites mismatched per-client
methods rather than preserving them, so stale DB rows are also healed.
* feat(sub): compact subscription rows with per-link email + PQ QR hide
Mirror the ClientInfoModal redesign on the public SubPage so the
subscription viewer reads as a tight `[PROTO] [remark] [copy] [QR]`
row per link instead of raw URL cards.
- subService.GetSubs now returns the per-link email list alongside the
links, threaded through subController and BuildPageData into the
`emails` field on subData (env.d.ts updated). Public links.go is
updated to ignore the new return.
- SubPage strips the client email from each row title using the
matched per-link email (same trimEmail behaviour as the modal), and
hides the QR button for post-quantum links (`pqv=`, `mlkem768`,
`mldsa65`) since the encoded URL won't fit in a single QR.
* feat(clients): hide QR for post-quantum links in client info modal
Post-quantum keys (mldsa65 / ML-KEM-768) blow the encoded URL past
what a single QR can hold. Detect them by the markers VLESS share
links actually carry — `pqv=<base64>` for mldsa65Verify and
`encryption=mlkem768x25519plus.*` for ML-KEM-768 — and drop the QR
button for those rows. Copy still works.
* fix(schemas): widen VLESS decryption/encryption to accept PQ values
The post-quantum auth blocks (ML-KEM-768, X25519) populate
`settings.decryption` / `settings.encryption` with values like
`mlkem768x25519plus.<base64>` and `xchacha20-poly1305.aead.x25519`,
but the schema pinned both fields to z.literal('none') so saving an
inbound after picking "ML-KEM-768 auth" failed with
`Invalid input: expected "none"`.
Relax both fields (inbound + outbound + outbound form) to
z.string().min(1) keeping the 'none' default. xray-core does its own
validation server-side so a string check at the form boundary is
enough.
* feat(sub): clash row + reorganise SubPage around Subscription info
ClientInfoModal:
- Add a Clash / Mihomo row to the subscription section, gated on
subClashEnable + subClashURI from /panel/setting/defaultSettings.
Defaults payload schema is widened to carry subClashURI/subClashEnable.
SubPage:
- Drop the rectangular QR-codes header that used to sit at the very
top of the card. The subscription info table now leads, followed by
Divider("Copy URL") + per-protocol link rows (already converted to
the compact ClientInfoModal pattern), then a new Divider("Subscription")
+ compact rows for the SUB / JSON / CLASH URLs with copy + QR-popover
actions. The apps dropdown row remains the footer.
CSS clean-up: removed the now-unused .qr-row/.qr-col/.qr-box/.qr-code
rules; kept .qr-tag and trimmed the info-table top gap. Added a
.sub-link-anchor underline-on-hover style for the new URL rows.
* fix(sub): multi-inbound traffic + trojan/hysteria userinfo + utf-8 vmess remark
Three bugs surfaced by the new SubPage and the recent client-record
refactor:
- xray.ClientTraffic.Email is globally unique, so a multi-inbound
client has exactly one traffic row attached to whichever inbound
claimed it. Iterating inbound.ClientStats per inbound dedup-locked
the first lookup to zero for clients that lived under any other
inbound, so the SubPage info table read 0 B for all the multi-
inbound subs. Replaced appendUniqueTraffic with a single
AggregateTrafficByEmails(emails) helper that runs one WHERE email
IN (?) over xray.ClientTraffic and folds the rows. GetSubs /
SubClashService.GetClash / SubJsonService.GetJson all share it.
- Trojan and Hysteria share-links embedded the raw password/auth into
the userinfo (scheme://<value>@host) without percent-encoding, so
passwords containing `/` or `=` (e.g., base64-with-padding) broke
popular trojan clients with parse errors. Added encodeUserinfo()
that wraps url.QueryEscape and rewrites the `+` (space) back to
`%20` for parity with encodeURIComponent on the frontend; applied
to trojan.password and hysteria.auth. Same fix on the frontend's
genTrojanLink.
- VMess link remarks ride inside a base64-encoded JSON payload, but
the SubPage / ClientInfoModal parser used JSON.parse(atob(body)),
which treats the binary string as Latin-1 and shreds any multi-byte
UTF-8 sequence. Most visible on the emoji decorations
(genRemark appends 📊/⏳), so a remark like `test-1.00GB📊` rendered
as `test-1.00GBð…`. Routed through Uint8Array +
TextDecoder('utf-8') so multi-byte codepoints survive.
* feat(settings): drop email leg from default remark model
Change the default remarkModel from "-ieo" to "-io" so a freshly
installed panel composes share-link remarks from the inbound name +
optional extra only, leaving out the client email. Existing panels
keep whatever value they have saved — only fresh installs and
fallback paths (parse failure, missing setting) pick up the new
default. Touched everywhere the literal "-ieo" lived: the canonical
default map, the two sub-package fallback constants, the four
frontend defaults (model class, link generator, two inbound modals,
useInbounds hook). Two snapshot tests regenerated and one obsolete
"contains email" assertion in inbound-from-db.test.ts removed.
To migrate an existing panel that wants the new behaviour, edit
Settings → Remark Model and remove the email leg.
* feat(sub): usage summary card + remark-email on QR popover labels
SubPage now opens with a clear quota panel directly under the info
table: large `used / total` numbers, gradient progress bar (green ≤
75%, orange to 90%, red above), `remained` and `%` on the foot, plus
a Tag chip for unlimited subscriptions and a coloured chip for days
left until expiry (blue >3d, orange ≤3d, red on expiry). Driven
entirely off existing subData fields — no backend changes.
While the row title in the link list stays email-stripped (default
remark model omits email now), the QR popover label folds it back
in so the rendered QR card identifies the client unambiguously. Tag
content becomes `<rowTitle>-<email>` in both SubPage and
ClientInfoModal — the encoded link itself is unchanged.
SubPage section order is now: info table → usage summary → SUB /
JSON / CLASH endpoints → per-protocol Copy URL rows → apps row, so
the most-glanceable status sits above the fold.
2026-05-26 19:26:50 -07:00
|
|
|
g.POST("/bulkDel", a.bulkDelete)
|
|
|
|
|
g.POST("/bulkCreate", a.bulkCreate)
|
2026-05-27 16:54:32 -07:00
|
|
|
g.POST("/bulkAttach", a.bulkAttach)
|
2026-05-28 02:08:52 -07:00
|
|
|
g.POST("/bulkDetach", a.bulkDetach)
|
refactor(clients): coherent group management — rename, split, extract
This bundles a set of group-related improvements that built up across
one session and only make sense together.
Terminology / API surface:
- Rename "assign group" → "add to group" everywhere: i18n keys,
callback names (bulkAddToGroup), component + file names
(BulkAddToGroupModal, AddClientsToGroupModal), Go controller/struct
names (bulkAddToGroup, AddToGroup), OpenAPI summaries. Nothing keeps
the word "assign" anymore.
- Move group routes under /panel/api/clients/groups/* (was
/bulkAssignGroup at the clients root).
- Split add and remove into two endpoints: /groups/bulkAdd now rejects
empty group; new /groups/bulkRemove clears the label for the given
emails. The old "submit empty to clear" UX is gone — Ungroup is its
own action.
UI affordances on Clients page:
- Promote Group + Ungroup to visible bar buttons next to Attach +
Detach. Group reuses BulkAddToGroupModal; Ungroup pops a danger
confirm and calls bulkRemoveFromGroup.
- Custom UngroupIcon (TagsOutlined with a diagonal strike) for the
Ungroup button so the pairing reads at a glance.
- Hide the Group column when no clients have a group label yet —
removes a column of em-dashes on fresh installs.
UI on Groups page:
- New per-row Add clients… / Remove clients… actions backed by
GroupAddClientsModal and GroupRemoveClientsModal: rich client picker
(email / comment / current group / enable) with search and
preserveSelectedRowKeys, mirroring the inbounds Attach modal UX.
Controller split:
- Move all /groups/* routes, handlers, and request bodies out of
web/controller/client.go into a dedicated web/controller/group.go
(GroupController with leaner clientService + xrayService
dependencies). URLs are byte-identical because the new controller
registers on the same parent gin.RouterGroup; api_docs_test.go gets
a group.go → /panel/api/clients basePath entry so its route
extraction keeps working.
Invalidation dedup:
- Removing a client from a group on the Groups page used to refetch
/clients/groups and /clients/onlines three times: once from the
mutation's onSuccess, once from a redundant invalidate() in the
page's onSubmit, once from the WebSocket invalidate broadcast that
the backend fires after every mutation. The manual invalidate() is
gone, and a small invalidationTracker module lets websocketBridge
skip WS-driven invalidates that arrive within 1.5s of a local
invalidate — bringing the refetch count down to one. The WS path
still works for changes made by another tab or user.
2026-05-28 03:59:20 -07:00
|
|
|
g.POST("/bulkResetTraffic", a.bulkResetTraffic)
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
g.POST("/resetTraffic/:email", a.resetTrafficByEmail)
|
|
|
|
|
g.POST("/updateTraffic/:email", a.updateTrafficByEmail)
|
|
|
|
|
g.POST("/ips/:email", a.getIps)
|
|
|
|
|
g.POST("/clearIps/:email", a.clearIps)
|
2026-08-15 07:50:20 -07:00
|
|
|
g.POST("/hwids/:email", a.getHwids)
|
|
|
|
|
g.DELETE("/hwids/:email", a.clearHwids)
|
feat(clients): allow removing a single HWID device (#6265)
* feat(clients): allow removing a single HWID device
Only "list" and "clear all" existed for registered HWID devices, so
freeing one slot under a client's HWID limit meant clearing every
device and waiting for the ones you kept to re-register. Adds a
per-device delete: DELETE /panel/api/clients/hwids/:email/:id, scoped
to the client's own sub_id (device ids are a global auto-increment,
not per-subID, so this also prevents deleting another client's
device), plus a delete button next to each device in the existing
HWID modal.
Addresses MHSanaei/3x-ui#6245.
* feat(clients): surface HWID limit + device log in the client info card
Mirrors the existing IP-limit row/eye-icon-modal pattern that's
already in this card. The HWID devices modal reuses the same
list/clear-all/per-device-delete UI already shipped for the edit
form's own HWID modal, so a device can be removed without opening the
edit form at all.
* i18n: add HWID single-delete strings to all 13 locales
deleteHwid/deleteHwidConfirm/hwidDeleted were only added to en-US and
ru-RU in the previous commit; backfilling the other 11 locales the
project's own translation set covers.
* fix(clients): address automated review of HWID single-delete PR
- ClientInfoModal: use the existing dateLabel() helper (Jalali-aware)
for HWID first/last-seen instead of a raw dayjs format, matching
every other timestamp in the same modal.
- Add okText/cancelText to the delete-device Popconfirm in both
ClientInfoModal and ClientFormModal so all 13 locales get a
translated confirm dialog instead of Antd's English default.
- deleteHwid controller: stop reusing the success toast key on both
error paths, which rendered a red "Update successful" toast on a
real (not just theoretical) failure such as a stale HWID modal.
- Trim DeleteClientHwid's doc comment to the repo's 2-line cap and
correct it: deletion is scoped by sub_id, which can span more than
one ClientRecord, not strictly "this client only".
- Add TestDeleteClientHwid covering cross-sub_id id rejection, unknown
id rejection, and a real successful delete.
* chore: retrigger CI (previous run stuck installing Playwright Chromium)
* fix(clients): address the arbiter review on the HWID single-delete PR
- Extract the HWID device list into a shared frontend/src/lib/clients/
hwid-log.ts type/normalizer, a shared useClientHwids hook, and a
shared ClientHwidListModal component, mirroring the existing IP-log
pattern. ClientInfoModal and ClientFormModal both render the same
component now, so the two copies can no longer drift the way they
already had (different date formatting, different tag styles).
- Add a Popconfirm to the HWID "Clear all" button (previously
unconfirmed, unlike the per-device delete right next to it) — closes
the confirm/no-confirm asymmetry the review flagged as the main risk.
- Sync docs/public/openapi.json with the two hwids paths and regenerate
clients.mdx. Scoped to just those two paths rather than a full copy
from frontend/public/openapi.json: the docs copy is far enough behind
on unrelated paths (a host-group API rename) that a full sync breaks
the Next.js build on locale pages referencing the old shape — out of
scope for this PR.
* fix(clients): trim HWID list comment blocks to 2 lines
Repo convention caps comment blocks at 2 lines; both were 1 line over.
* chore: retrigger CI
build (arm64) and build (armv6) failed on a transient Go module proxy
network error (INTERNAL_ERROR stream reset), unrelated to this PR's
changes.
2026-08-21 05:17:05 -07:00
|
|
|
g.DELETE("/hwids/:email/:id", a.deleteHwid)
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
g.POST("/onlines", a.onlines)
|
feat(nodes): multi-hop node attribution for chained sub-nodes (#4983) (#5005)
* feat(nodes): add stable panel GUID identity (multi-hop phase 0)
Per-panel autoincrement node ids are meaningless one hop away, so in a chained topology (Node1 -> Node2 -> Node3) the master cannot attribute online clients or inbounds to the physical node that hosts them (#4983).
Introduce a stable self-identifier: each panel generates and persists a panelGuid (settings table, mirroring GetSecret), returns it in panel/api/server/status, and the master learns it per node via the heartbeat into a new Node.Guid column. Guarded so an old-build node or a failed probe never clears a known GUID. No behavior change yet - this is the identity foundation Phases 1-2 key on.
Refs #4983
* feat(nodes): attribute inbounds to their origin node by GUID (multi-hop phase 1)
Add Inbound.OriginNodeGuid: the GUID of the panel that physically hosts an inbound. Empty means this panel's own xray; set means it was synced from a node. SetRemoteTraffic now fills it per synced inbound - keeping a non-empty value the node forwarded from its own sub-node (so a transitive inbound stays attributed to the deepest node across hops), and otherwise attributing the node's own local inbounds to that node's GUID. Empty (old-build node without a GUID) leaves the existing node_id-based attribution untouched.
The field rides the existing inbound JSON, so /list propagates it up the chain with no serve-side change. Phase 2 will key per-node online off this instead of the panel-local node_id.
Refs #4983
* feat(nodes): key online status by node GUID end-to-end (multi-hop phase 2)
Replace the panel-local node-id keying of per-node online status with the stable panelGuid, so a client several hops down a node chain is attributed to the node that physically hosts it instead of the intermediate node it syncs through (#4983).
xray/process.go stores each direct node's reported GUID-keyed subtree and merges them (correct at any depth); the service assembles GetOnlineClientsByGuid (own clients under this panel's GUID + every node under its GUID). FetchTrafficSnapshot fetches the new /clients/onlinesByGuid, falling back to the flat /onlines for old-build nodes (keyed under the node's GUID or a master-local synthetic id). The node rollup, the WS onlineByGuid/activeInbounds fields, and the inbounds-page rollup all scope by GUID; local inbounds get their OriginNodeGuid filled with the panel's GUID at serve time so the frontend keys uniformly.
Old-build nodes degrade to the prior flat behaviour via the synthetic node:<id> key. Refs #4983
Refs #4983
* feat(nodes): surface transitive sub-nodes on the master (multi-hop phase 3a)
Each panel publishes read-only summaries of the nodes it manages via GET /panel/api/server/descendants (node API token). The heartbeat job caches each direct node's summaries; GetNodeTree merges them as transitive model.Node projections (Id 0, Transitive=true, ParentGuid = their parent node's GUID) and recomputes InboundCount/OnlineCount/DepletedCount per origin GUID so a direct node shows only its own inbounds and each sub-node shows its own (#4983).
The Nodes-page list endpoint and the heartbeat broadcast now return the tree; GetAll stays direct-only for probing/syncing. One transitive level is surfaced (covers Node1->Node2->Node3); deeper recursion is a follow-up. Backend only - the Nodes-page nested UI lands next.
Refs #4983
* feat(nodes): render transitive sub-nodes nested + read-only on the Nodes page (multi-hop phase 3b)
The Nodes page now shows a node's downstream sub-nodes (learned via the descendants tree) as indented, read-only rows ordered right under their parent: no enable toggle, probe, edit, delete, update, selection, or history expander - just a 'Sub-node' tag whose tooltip names the parent it is reached through. Desktop table and mobile cards both handle it. Transitive rows are keyed by GUID (their Id is 0) so they don't collide with real nodes (#4983).
Rows nest by parentGuid rather than AntD tree-children to avoid clashing with the existing per-row history expander. New labels added to en-US (other locales fall back until translated). Refs #4983
Refs #4983
* i18n(nodes): translate subNode/subNodeTip across all locales
Phase 3b added these two Nodes-page keys (read-only sub-node tag + tooltip) only to en-US; fill in the other 12 locales so the multi-hop sub-node UI is fully localized. The {parent} placeholder is preserved in every translation.
Refs #4983
2026-06-06 03:33:39 -07:00
|
|
|
g.POST("/onlinesByGuid", a.onlinesByGuid)
|
2026-06-15 14:50:05 -07:00
|
|
|
g.POST("/clientIpsByGuid", a.clientIpsByGuid)
|
2026-06-03 07:19:00 -07:00
|
|
|
g.POST("/activeInbounds", a.activeInbounds)
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
g.POST("/lastOnline", a.lastOnline)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) list(c *gin.Context) {
|
|
|
|
|
rows, err := a.clientService.List()
|
|
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.obtain"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonObj(c, rows, nil)
|
|
|
|
|
}
|
|
|
|
|
|
feat(clients): add calendar weekly renewal and schedule previews (#6524)
* feat(clients): add calendar weekly renewal and schedule previews
Expose fixed-day, calendar-weekly, calendar-monthly, and disabled renewal
through one shared selector in individual and bulk client forms. Store the
weekly weekday separately (Monday 1 through Sunday 7) and use panel-local
calendar dates rather than a fixed 168-hour duration. Resolve skipped or
repeated midnights to the first valid instant of the selected date, and skip
an entirely nonexistent calendar date rather than changing the weekday.
Reuse the existing renewal writer and share its boundary alignment and
per-period catch-up calculation with an authenticated, read-only preview.
Keep monthly precedence for legacy records, fixed-day interval semantics,
maximum renewal allowances, first-use durations, and operator-disabled
settings unchanged. Selecting a mode does not rewrite an existing cutoff;
an unset calendar cutoff requires an explicit action to choose the first.
The last-valid-second preview uses the stored exclusive expiry, even when
the billing calculation aligns a legacy last-second cutoff up to midnight.
Carry weekly schedules through client persistence, paging, enable toggles,
inbound settings, and node traffic reconciliation. Migrate missing or nullable
weekday columns to disabled by default without altering existing limits, and
include the new isolated-schema PostgreSQL regression in the live CI gate.
Regenerate API contracts and reference documentation, add lifecycle and form
regressions, and document timezone, quota-reset, and upgrade considerations.
All participating nodes must be upgraded before weekly mode is enabled;
older binaries ignore the new field. Independent periodic traffic resets and
the optional month-end subscription-header display are not changed.
* fix(clients): validate renewal schedules across inbound write paths
Reject conflicting weekly/interval/monthly schedules and out-of-range
weekdays on inbound creation and edits, legacy one-client apply paths,
record/link synchronization, and traffic metadata writes. Validate imported
traffic snapshots as well, before any inbound or client is persisted, so
an inbound API cannot create a client that the clients page cannot toggle.
Merge a weekly-related schedule as one timestamp-selected tuple rather
than filling its zero fields from another renewal mode. Preserve empty
migration snapshots and the existing non-weekly monthly/interval merge
semantics. Renewal caps, counters, credentials, and deadlines are unchanged.
Add regressions for nine write paths, unchanged records and runtime calls
after rejection, valid inbound clients remaining editable, and duplicate
record merges between individually valid renewal modes.
* docs(clients): clarify depleted-client deletion risks on downgrade
Explain in English and Chinese that older versions not only stop weekly
renewal: their depleted-client cleanup can delete a weekly-only client once
its expiry or quota is exhausted. This is conditional on cleanup, not an
automatic deletion caused by downgrade itself.
Recommend backing up and converting weekly schedules to a mode supported
by every participating version before rollback, and avoiding cleanup while
mixed versions or unconverted clients remain. Merely disabling weekly
renewal does not restore the old binary's missing purge protection.
* fix(clients): bound weekly renewal date searches
Limit the search for a valid weekly calendar date to eight candidates so
an unusual timezone cannot monopolize the single traffic writer. Exhaustion
returns the original instant, allowing the existing catch-up forward-progress
guard to stop without advancing expiry, consuming an allowance, resetting
traffic, or falling back to a fixed-duration schedule that can drift.
Reject a non-future calendar suggestion in the read-only preview instead of
offering an immediately expired initial cutoff. Also report failed weekly
catch-up as a search error when allowances remain, not as cap exhaustion.
Existing preview errors use the form's current warning; no API schema or
locale changes are needed.
Exercise exhaustion with a synthetic valid TZif containing twelve skipped
Sundays. This fault-injection case was red without the bound; it is not a
claim that a production IANA timezone was observed hanging. Keep the Havana
and Apia regressions for real skipped/repeated midnights and absent dates.
* fix(tests): isolate weekly renewal preview timezone
Stop the weekly search regression from replacing process-global time.Local.
CI caught that assignment and its cleanup racing with background timer reads
through time.Now, even though the top-level tests do not use t.Parallel.
Pass the timezone and current instant into the unchanged preview calculation.
The public service still validates the request and resolves the panel timezone;
API responses, renewal accounting, and persisted client data are unchanged.
Use fixed dates for both suggestion and catch-up exhaustion, removing the
test's dependency on today's date and its unnecessary database setup. Keep a
bounded-lifetime background clock reader to expose future global-timezone
mutations under the existing race gate rather than disabling that check.
* ci: retrigger PR checks
Create an empty commit to request a fresh pull-request CI run after release dependency downloads failed with network errors.
No source, dependency, or workflow changes are included. Retry the existing checks without bypassing them.
* ci: retry PR checks and record deferred download hardening
Request another CI run after the amd64 release job compiled successfully but failed during dependency fetching with exit code 4 (network failure).
Record possible follow-up improvements for the Linux release fetch helper:
- Print each download URL and destination, and preserve error details.
- Reuse the existing curl configuration with up to five retries; add connection and per-attempt timeouts and a bounded retry window.
- Download to a temporary file and promote it to the final filename only after a successful, non-empty transfer. Keep the job failing if downloads ultimately fail.
- Validate successful downloads, recovery after a temporary failure, and correct failure after persistent errors before shipping such a change.
These improvements are intentionally deferred, not implemented or tested by this commit. This commit is empty: renewal logic, dependencies, workflow configuration, check requirements, and TLS verification remain unchanged.
---------
Co-authored-by: JacktheRanger <219502738+JacktheRanger@users.noreply.github.com>
2026-09-26 13:59:23 -07:00
|
|
|
func (a *ClientController) renewalPreview(c *gin.Context) {
|
|
|
|
|
var request service.ClientRenewalPreviewRequest
|
|
|
|
|
if err := c.ShouldBindJSON(&request); err != nil {
|
|
|
|
|
jsonObj(c, nil, err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
preview, err := a.clientService.PreviewRenewal(request, &a.settingService)
|
|
|
|
|
jsonObj(c, preview, err)
|
|
|
|
|
}
|
|
|
|
|
|
Reduce list-page payloads with slim/paged endpoints (#4500)
* perf(inbounds): slim list payload + lazy hydrate for row actions
Adds GET /panel/api/inbounds/list/slim that returns the same list shape
but strips every per-client field besides email/enable/comment from
settings.clients[] and skips UUID/SubId enrichment on ClientStats.
The inbounds page only reads those three to compute its client counters
and badges, so the slim variant trims tens of bytes per client (uuid,
password, flow, security, totalGB, expiryTime, limitIp, tgId, ...).
On a panel with thousands of clients this is the dominant load-time
cost.
Detail flows (edit / info / qr / export / clone) call /get/:id through
a new hydrateInbound helper before opening — the slim list view never
needs the secrets it doesn't render.
* perf(clients): server-side pagination + slim row payload
Adds GET /panel/api/clients/list/paged that filters, sorts, and paginates
on the server, returns a slim row shape (drops uuid/password/auth/flow/
security/reverse/tgId per client), and includes a stable summary
(total, active, online[], depleted[], expiring[], deactive[]) computed
across the full DB row set so the dashboard cards don't change as the
user paginates or filters. Page size capped at 200.
useClients now exposes { clients (current page), total, filtered, query,
setQuery, summary, hydrate }. ClientsPage feeds its filter/sort/page
state into setQuery via a single effect, debounces search by 300ms, and
hydrates the full client record via /get/:email before opening edit/info/
qr modals. Local filter/sort logic and the all-clients summary memo are
gone.
On a 2000-client panel this turns the initial response from ~MB to ~25 row
slice (~10s of KB) and removes the all-client parse cost from every
refresh.
* perf(settings): use /inbounds/options for LDAP tag picker
The General settings tab only needs each inbound's tag/protocol/port to
fill a dropdown but was calling /panel/api/inbounds/list which ships the
full settings JSON with every embedded client. Switched it to /options
and added Tag to the projection. On a panel with thousands of clients
this drops the General-tab load payload from megabytes to a tiny
per-inbound row each.
* perf(clients): de-duplicate options + paged list fetches
Two issues caused each clients-page load to fire its requests twice:
1. setQuery in the hook took whatever object the consumer passed and
stored it as-is. The consumer (ClientsPage) constructs a new object
literal in an effect, so even when nothing actually changed the ref
was new — the hook's useEffect saw a new query and re-fetched.
Wrapped setQuery with a shallow value compare so identical params
are a no-op.
2. The picker /inbounds/options fetch was bundled into refresh() with a
length==0 guard, but the two back-to-back refreshes both saw an
empty inbounds array (the first hadn't resolved yet) so both fired
the request. Moved the options fetch into its own one-shot effect.
* perf(inbounds): share nodes list with form modal instead of refetching
InboundsPage and InboundFormModal both called useNodes() — each
instance maintains its own state and fires its own /panel/api/nodes/list
fetch on mount. Since the modal is always rendered (open or not), every
page load hit the endpoint twice.
Threaded nodes from the page through an availableNodes prop on the form
modal so they share one fetch.
* docs(api): register /clients/list/paged endpoint
TestAPIRoutesDocumented was failing because the new paginated clients
endpoint added in this branch wasn't listed in endpoints.js.
2026-05-23 08:43:43 -07:00
|
|
|
func (a *ClientController) listPaged(c *gin.Context) {
|
|
|
|
|
var params service.ClientPageParams
|
|
|
|
|
if err := c.ShouldBindQuery(¶ms); err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.obtain"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
resp, err := a.clientService.ListPaged(&a.inboundService, &a.settingService, params)
|
|
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.obtain"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonObj(c, resp, nil)
|
|
|
|
|
}
|
|
|
|
|
|
feat(api): add GET endpoint to look up clients by Telegram ID (#5945)
* feat(api): add GET endpoint to look up clients by Telegram ID
GET /panel/api/clients/getByTgId/:tgId returns all clients matching the given Telegram user ID. tgId is not unique, so the response is an array of {client, inboundIds, externalLinks, usedTraffic} objects.
* fix: guard tgId=0 sentinel, index tg_id, deduplicate enrichment in getByTgId
Three issues from the code review on the new GET /panel/api/clients/getByTgId/:tgId
endpoint: the lookup did not short-circuit tgId <= 0 (this codebase's sentinel
for 'no Telegram ID'), had no index on clients.tg_id causing a full table scan
on every call, and duplicated the per-record enrichment (inbound IDs, external
links, effective flow, traffic) identically between get and getByTgId.
- Reject tgId <= 0 in GetRecordsByTgId with a clear error, matching the
'0 = none' convention used elsewhere in the codebase.
- Add index:idx_clients_tg_id to ClientRecord.TgID (struct tag + idempotent
startup migration for existing databases).
- Extract buildClientPayload helper used by both get and getByTgId.
- Update client_lookup_test.go to verify sentinel rejection instead of
expecting tgId=0 to be a valid lookup.
* refactor(api): move Telegram client lookup under /get/tgId/:tgId
Nest the Telegram-ID lookup beside the email lookup as /get/tgId/:tgId
instead of the flat /getByTgId/:tgId, so both client fetch routes share the
/get prefix. Gin resolves the static tgId segment ahead of the :email
wildcard, so /get/:email keeps matching plain email lookups, including a
literal 'tgId' email. The endpoint is unreleased, so no compatibility
concern.
2026-07-28 13:38:44 -07:00
|
|
|
func (a *ClientController) buildClientPayload(rec *model.ClientRecord) (gin.H, error) {
|
|
|
|
|
inboundIds, err := a.clientService.GetInboundIdsForRecord(rec.Id)
|
|
|
|
|
if err != nil {
|
|
|
|
|
return nil, err
|
|
|
|
|
}
|
|
|
|
|
externalLinks, err := a.clientService.GetExternalLinksForRecord(rec.Id)
|
|
|
|
|
if err != nil {
|
|
|
|
|
return nil, err
|
|
|
|
|
}
|
|
|
|
|
flow, err := a.clientService.EffectiveFlow(nil, rec.Id)
|
|
|
|
|
if err != nil {
|
|
|
|
|
return nil, err
|
|
|
|
|
}
|
|
|
|
|
rec.Flow = flow
|
|
|
|
|
var usedTraffic int64
|
|
|
|
|
if t, tErr := a.inboundService.GetClientTrafficByEmail(rec.Email); tErr == nil && t != nil {
|
|
|
|
|
usedTraffic = t.Up + t.Down
|
|
|
|
|
}
|
feat(amneziawg): add native AmneziaWG protocol support (#6105)
* feat(amneziawg): add native AmneziaWG protocol backend
AmneziaWG (WireGuard plus DPI-resistant obfuscation) needs no Docker
here — it runs as a genuine kernel interface via awg-quick/awg, managed
the same way internal/mtproto manages mtg: one Inbound row is one
desired Instance, and a Manager reconciles running interfaces toward
the database every 10s (internal/web/job/amneziawg_job.go) plus
immediately after a client edit (applyLocalAmneziaWG).
Clients reuse model.Client verbatim (the same PrivateKey/PublicKey/
PreSharedKey/AllowedIPs fields WireGuard already uses), so bulk
operations, the QR/share-link modal and subscriptions come from the
shared inbound infrastructure instead of a parallel implementation.
internal/amneziawg owns the obfuscation param generator/validator
(ported from coinman-dev/3ax-ui, upgraded to AmneziaWG 2.0's S3/S4
padding and I1 signature packet) and the exec wrapper around
awg-quick/awg, with fingerprint-based reconcile (noop / reload-via-
syncconf / full restart) mirroring mtproto.Manager so a same-protocol
edit doesn't force an unnecessary interface bounce that would drop
every peer's connection.
Frontend and install.sh's DKMS/awg-tools setup are tracked separately;
this is backend-only.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): add frontend support and fix a Go->Zod generator gap
Wires the amneziawg protocol through the panel UI the same way every
other protocol is registered: a Zod settings schema (nested
{server, clients}, matching the Go JSON exactly), the protocol enum,
the inbound-form's per-protocol fields component and its
tab-visibility allowlist, the default-settings factory, the client
schema dispatcher, and the sniffing-capability exclusion (no Xray
inbound exists for amneziawg, same as mtproto).
Client key/allowedIPs fields are reused rather than duplicated: since
AmneziaWG clients are wire-identical to WireGuard clients (same
model.Client fields), ClientFormModal renders one shared field block
for both, switching only the visible label by which protocol is
active. The private-key input also gets a live public-key sync via a
new useEffect, because unlike WireGuard's Xray-native inbound (which
re-derives its public key at runtime and never stores one),
AmneziaWG's server.publicKey is a real persisted field the Go backend
reads directly — free-typing a new private key without this would
silently save a mismatched keypair.
Adds a downloadable per-client .conf (amneziawgConfig.ts, mirroring
wireguardConfig.ts) with the obfuscation lines, and an
InboundOption.AwgServer field on the Go side so the config builder
gets the full server block in one round trip.
Along the way, running tools/openapigen surfaced a real bug: it
doesn't flatten anonymously-embedded Go structs the way encoding/json
does, so ServerSettings embedding Obfuscation20 produced a Zod schema
with a nested `obfuscation20` key that never matches the real wire
JSON. Fixed by un-embedding (flat fields + an accessor method) and
registering internal/amneziawg in the generator's own package list,
which had been silently emitting a dangling schema reference.
English and Russian translations are complete; the other 10 locale
files still fall back to English for the new keys.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): complete frontend parity for the Inbounds list page
The Clients page (form, CRUD, QR/config) already worked from the
prior commit; this closes the remaining gap on the Inbounds side and
in a couple of protocol allowlists that a plain search for existing
wireguard/mtproto handling turned up.
lib/xray/inbound-link.ts gets amneziawg-specific link/config builders
(genAmneziaWGLink/genAmneziaWGConfig, plus the *s fan-out variants)
mirroring the wireguard ones — AmneziaWG has no legacy peers-array to
fall back to, so these read settings.clients directly and add the
obfuscation lines every client must share with the server. Wired into
genInboundLinks generically, and into three consumers that call the
wireguard builders directly rather than through that dispatcher:
QrCodeModal, InboundInfoModal, and InboundsPage's bulk export.
ClientInfoModal, ClientBulkAddModal, and the bulk attach/detach modals
each had their own protocol allowlist that needed amneziawg added
alongside wireguard/mtproto.
Two real gaps surfaced by grepping every remaining 'wireguard' /
Protocols.WIREGUARD hit in frontend/src rather than trusting the
checklist was exhaustive:
- useInbounds.ts's TRACKED_PROTOCOLS gates the deactive/depleted/
expiring/online client counts shown per inbound on the list page;
without amneziawg those counts would silently read zero.
- inbound-tag.ts is an explicit client-side mirror of the Go backend's
port_conflict.go (the file says so itself: "Keep in sync"). It still
only special-cased wireguard for UDP, so an amneziawg inbound would
have fallen through to the TCP default and disagreed with the
backend's own port-conflict math.
Also finishes translating the AmneziaWG UI strings into the 11 locale
files that were still falling back to English (ar-EG, es-ES, fa-IR,
id-ID, ja-JP, pt-BR, tr-TR, uk-UA, vi-VN, zh-CN, zh-TW), matching
en-US/ru-RU key-for-key (26 new keys, verified by count in every file).
Not run anywhere: npm run typecheck / build. This machine has neither
Node nor npm, so nothing here has compiled — reviewed by hand plus
brace/paren balance checks and cross-referencing the generated Zod/TS
types. Treat this as needing a real typecheck before shipping.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* docs(install): note that AmneziaWG kernel module install is still manual
Tracked separately (not yet ported into this script) — see
coinman-dev/3ax-ui's install_amneziawg for the reference approach
(ppa:amnezia/ppa). Also serves as a real, path-filter-matching change
to get the previous empty commit's CI trigger to actually fire —
release.yml's push trigger is paths-scoped and an empty commit changes
no files, so it never matched.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): add a button to randomize obfuscation parameters
Mirrors the existing key-regenerate button next to the private key
field. Client-side randomization matches the ranges/constraints of
GenerateObfuscation20's "default" preset (internal/amneziawg/params.go)
closely enough for a form suggestion — the user can still hand-edit any
field afterward.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(install): auto-install the AmneziaWG DKMS module + amneziawg-tools
Ports install_amneziawg from coinman-dev/3ax-ui's install.sh, adapted to
this script's broader distro coverage and NONINTERACTIVE convention:
- Ubuntu/Debian/Armbian: ppa:amnezia/ppa (primary, tested path), with a
reachability pre-check for the Launchpad PPA host — often blocked by
hosting providers, especially Russian VPS — so a flaky network skips
the feature instead of hanging apt through several retries.
- Fedora/RHEL-family, Arch/Manjaro/Parch: best-effort fallback to plain
wireguard-tools (+ AUR amneziawg-dkms via yay/paru when available),
with a manual-install pointer.
- Everything else: manual-install pointer only.
Also installs ndppd and persists IPv4/IPv6 forwarding (for the future
IPv6/NDP phase, not yet wired into the panel) and adds a Secure Boot
warning at the end of the run, since a DKMS-built module is unsigned
and won't load while it's enabled — a common trap on cloud VPS images.
Never fatal: the panel installs and runs fine either way, an AmneziaWG
inbound just won't bring up its tunnel until the module is present.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): resolve all 3 real CI failures (typecheck/lint/codegen)
Found by checking the fork's Actions tab after the last two pushes —
the release build passed (it doesn't run these checks) but the
separate CI workflow caught three real issues:
- golangci-lint (noctx): every internal/amneziawg/manager.go exec.Command
call is now exec.CommandContext with a 30s timeout, so a hung
awg-quick/awg invocation can't block the reconcile job indefinitely
(mirrors internal/mtproto/process.go's own CommandContext usage).
- tsc --noEmit: frontend/src/schemas/client.ts's hand-maintained
InboundOptionSchema (used by the useClients hook, separate from the
auto-generated one in generated/) never got an awgServer field added
when the AmneziaWG frontend work was done — every read of
inbound.awgServer.* in amneziawgConfig.ts was typing as {}. Added
AwgServerOptionSchema, nested (not flattened like wg*) to match what
amneziawgConfig.ts already expects. Also guarded server.publicKey in
inbound-link.ts's genAmneziaWGLink against the schema's optional type.
- codegen staleness: frontend/public/openapi.json is produced by a Node
script (gen:api) this machine can't run; hand-applied the exact diff
the CI failure log already showed (amneziawg protocol enum entry,
ServerSettings schema, InboundOption.awgServer, one example payload),
verified as valid JSON.
Also confirmed independently by this run: install_amneziawg (previous
commit) installed and loaded the DKMS module successfully on both amd64
and arm64 CI runners. The two "Deploy Smoke Tests" failures are
unrelated to this change — this fork has only ever published the
dev-latest pre-release, and GitHub's /releases/latest API deliberately
excludes pre-releases, so the smoke test's no-argument install path
(which resolves "latest") has nothing to find. Not a regression; needs
an actual tagged release whenever that's wanted.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): Phase 2a — IPv6 support + NDP proxy
Adds native dual-stack IPv6 to AmneziaWG inbounds, ported from
coinman-dev/3ax-ui's approach:
- ServerSettings gets ipv6Enabled/ipv6Subnet/ipv6ExternalInterface;
Instance carries the server's own IPv6 address (first host of the
subnet) alongside its IPv4 one.
- defaultAmneziaWGClients allocates an IPv6 host address per client
(second AllowedIPs entry) when the server has IPv6 enabled, reusing
allocateWireguardAddress — which needed a real fix along the way: it
always suffixed "/32" regardless of address family, which is wrong
for an IPv6 host address (needs /128). Now family-aware.
- generateServerConfig's PostUp/PostDown gains IPv6 forward-accept
rules, proxy_ndp sysctl, and one `ip -6 neigh add/del proxy` entry per
enabled peer with an IPv6 address — the lightweight per-client
method, not the ndppd-daemon whole-subnet method (not worth the
config-file-management complexity at this scale; ndppd itself is
still installed by install.sh in case that changes later).
- ValidateIPv6Subnet rejects a malformed subnet before save.
- Frontend: ipv6Enabled/ipv6Subnet/ipv6ExternalInterface fields on the
AmneziaWG inbound form, EN+RU translations, openapi.json/generated/*
regenerated (the latter via `go run ./tools/openapigen`, pure Go).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): fill in IPv6 fields missed by the Phase 2a commit
Two real gaps the CI caught (both new fields, both my miss):
- inbound-defaults.ts's createDefaultAmneziawgInboundSettings() built a
server object literal predating ipv6Enabled/ipv6Subnet/
ipv6ExternalInterface — AmneziawgServer's inferred type now requires
them (zod .default() fields are non-optional post-parse), so this
didn't typecheck at all.
- openapi.json's ipv6Enabled property was missing the description the
real generator attaches (the Go doc comment covering all three IPv6
fields is attached to the first one) — a one-line diff, but git
diff --exit-code doesn't care how small.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): Phase 2b — per-client port-forwarding
Admins can now set a per-client ForwardedPorts string (e.g. "80, 443,
8000-8100") that gets DNAT'd + FORWARD'd to that peer's tunnel address
via iptables rules in PostUp/PostDown, ported and simplified from
coinman-dev/3ax-ui's shared/portfwd.
Two decisions worth flagging for future readers:
- The iptables --comment tag on each rule is awg-fwd-<fnv32a(email)>,
not the raw client email. Email is admin/API-supplied free text that
ends up embedded in a shell-executed PostUp/PostDown line; a hash
can never carry a shell metacharacter through where raw
interpolation could.
- The reconcile manager gained a third fingerprint (portFwdFP, next to
the existing structural/peers ones). `awg syncconf` only touches the
WireGuard peer table — it never re-applies PostUp/PostDown iptables
rules — so a port-forward-only change has to force a full
awg-quick down+up bounce, same as a structural change, rather than
the lighter sync a plain peer add/remove can use.
Also fixes a real pre-existing bug found while wiring up IPv6 client
allocation in the previous commit's spirit: allocateWireguardAddress
always suffixed "/32" regardless of address family, which produced
invalid host bits for IPv6 (needs "/128").
ForwardedPorts flows through model.Client -> model.ClientRecord
(gorm column wg_forwarded_ports, auto-migrated) -> ToRecord/ToClient/
MergeClientRecord, mirroring the awgServer field's earlier lesson
that new fields need checking against a second, hand-maintained
persistence-layer struct.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): route a client's traffic through Xray via the Routing page
Every enabled AmneziaWG inbound gets its own Xray TPROXY bridge
automatically, with no toggle to enable first: a loopback
dokodemo-door inbound (sockopt.tproxy) tagged with the AmneziaWG
inbound's own real tag, so it's already selectable in the existing
Routing page's inbound-tag picker — the same trick the mtproto
sidecar's own bridge already relies on (InboundService.GetInboundTags
is a plain, protocol-blind SELECT over every inbound row's tag, no
dedicated UI plumbing needed).
internal/amneziawg's defaultPostUpDown TPROXYs every peer's traffic
into that bridge unconditionally; the bridge's port is derived
deterministically from the inbound's id (EgressPortForInbound) so the
kernel-side reconcile loop and the Xray-config generator never need to
negotiate a runtime value between them.
injectAmneziawgEgress never generates a routing rule itself — whether
a client's traffic goes anywhere beyond Xray's default routing is
entirely up to whatever rules the admin adds through the existing
Routing UI (pick the AmneziaWG inbound's tag as source, optionally a
specific peer's IP via that page's own Source-IP field, and an
outbound), exactly the same workflow as routing any other protocol.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): recover orphaned interfaces after an ungraceful exit
Two gaps left an AmneziaWG interface stuck outside the manager's
control after a crash (kill -9/OOM/panic skips StopAll):
- ensureRestart's teardown was gated on the in-memory `exists` map,
which is always empty on a fresh process, so a survived interface
never got interfaceDown before interfaceUp tried `ip link add`
against a name the kernel already had — failing forever and never
populating m.ifaces, so traffic accounting silently stopped and the
inbound could never be removed. Gate on isInterfaceUp instead, which
checks real kernel state rather than this process's own bookkeeping.
- An inbound deleted from the database entirely while the panel was
down has no entry in `desired` ever again, so it never reaches the
per-id cleanup loop in Reconcile (which only walks m.ifaces). Add a
one-time sweepOrphansLocked scan of configDir, mirroring
mtproto.Manager.sweepOrphansLocked, that tears down and removes any
leftover interface/config not in the current desired set.
Found by the automated review on MHSanaei/3x-ui#6105 (Finding 1).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* i18n(amneziawg): backfill IPv6/obfuscation/port-forwarding keys in 11 locales
Only en-US/ru-RU ever got these 9 keys as each AmneziaWG feature landed
(the regenerate-obfuscation button, then Phase 2a's IPv6 fields, then
Phase 2b's per-client ForwardedPorts) — the other 11 locale files were
never backfilled, so i18next has been silently falling back to English
for all of them since Phase 1. Cosmetic-only (never broke anything),
but now closed for every shipped locale.
* fix(amneziawg): resolve 7 Medium findings from the automated PR review
Each is independently reproducible; fixed together since one review pass
found all of them.
- manager.go: the shared "ip rule add fwmark" policy route had no
existence check, so it duplicated in "ip rule show" on every interface
bounce (which hostRulesFingerprint forces on any client add/remove/
re-IP). Now checked via "ip rule list | grep -q ..." first. (Finding 2)
- params.go: ExternalInterface, IPv6ExternalInterface, and subnetIp/
subnetCidr are interpolated unescaped into a shell-executed PostUp/
PostDown line, but only obfuscation and the IPv6 subnet were validated
before save. Added ValidateInterfaceName (a strict charset+length
pattern) and ValidateSubnetIPv4 (netip.ParsePrefix), wired into
normalizeAmneziaWGSettings. (Finding 3)
- amneziawg_job.go: IsAwgInstalled() existed but nothing ever called it,
so a host without awg/awg-quick (the Docker image, RHEL, Arch, a failed
install.sh PPA step) logged a reconcile failure every 10s forever. Now
checked once an inbound actually needs it, warning once instead of
spamming. (Finding 4)
- client_inbound_apply.go: the WireGuard/AmneziaWG credential
carry-forward (added so a metadata-only client edit doesn't rotate
keys) never covered ForwardedPorts, so a partial edit -- an API call or
Telegram-bot toggle that omits the field -- silently wiped a client's
port-forwarding spec. Carried forward and written back the same way the
key fields already are. (Finding 5)
- manager.go: hostRulesFingerprint keyed each peer on its IPv4 address
only, and structuralFingerprint omitted IPv6Enabled/IPv6ExternalInterface
entirely, so an IPv6-only change could pick the syncconf reload path
(which never re-runs PostUp, leaving a stale NDP-proxy entry) or be a
complete no-op. Both fingerprints now cover the IPv6 fields. (Finding 6)
- port_conflict.go: the AmneziaWG egress bridge (injectAmneziawgEgress)
binds 127.0.0.1:63100+id with no collision check anywhere, since it
isn't a database row the ordinary port-conflict query can see -- same
blind spot the reserved Xray API port already has its own check for.
Added the equivalent check for the AmneziaWG bridge port. (Finding 7)
- install.sh: install_amneziawg ran unconditionally for every install/
update, building a DKMS kernel module and enabling host-wide IPv4/IPv6
forwarding whether or not the feature is ever used. Gated behind a new
should_install_amneziawg (XUI_INSTALL_AMNEZIAWG=true/false, or an
interactive y/N prompt defaulting to no). Also replaced the deprecated
apt-key adv with a dedicated keyring + signed-by= on the Debian branch,
and guarded its sources.list appends against duplication on a retried
install. (Finding 8)
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): make the Xray TPROXY bridge a per-inbound opt-in
Addresses Finding 10 from the automated PR review: an always-on TPROXY
bridge makes every AmneziaWG tunnel hard-depend on Xray being up (all
traffic, including DNS, drops whenever Xray restarts), and forces a full
awg-quick down+up bounce on any client add/remove/re-IP, permanently
losing the syncconf fast path.
Adds ServerSettings.RouteThroughXray (off by default):
- defaultPostUpDown only emits the TPROXY/policy-route rules when it's
on; a plain AmneziaWG tunnel now has zero Xray dependency out of the
box.
- structuralFingerprint covers it (toggling it changes whether PostUp/
PostDown contain any TPROXY rules at all -- structural, not a
per-peer host-rule). hostRulesFingerprint's IPv4 tracking is now
itself conditional on RouteThroughXray (and IPv6 tracking on
IPv6Enabled), so an instance that never uses either keeps the
syncconf fast path for a plain peer re-IP.
- injectAmneziawgEgress only creates a bridge for inbounds that opted
in; checkAmneziawgEgressConflict (the Finding-7 fix) now parses each
candidate through InstanceFromInbound so a non-routed inbound's port
is correctly never treated as reserved.
- New inbound-level Switch in the AmneziaWG form; the actual outbound
decision is still made entirely through the panel's stock Routing
page, same as before -- only whether the bridge exists at all is now
a choice.
Translation keys added to all 13 locales in the same commit this time,
not backfilled later (see Finding 9's lesson).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): resolve 4 Low findings from the automated PR review
- manager.go: serverAddress assumed subnetIp always ends in ".0"; a
base like "10.8.1.5" was used verbatim as the server's own address,
eventually colliding with peer allocation (which starts at .2
upward). Now derives the first host of the actual subnetIp/subnetCidr
network via netip, matching serverAddressV6's own approach. A /32
base (no host bits at all) is still used as-is. (Finding 12, partial
-- the /16 pool-widening half of this finding only exists on the
upstream-pr/amneziawg branch's merged client_wireguard.go, not here;
handled separately on that branch.)
- manager.go: ensureLocked carried the previous per-peer traffic
counters (`last`) forward even through a full restart, but
awg-quick down+up resets the kernel's own counters to zero -- the
next CollectTraffic computed a large negative delta (clamped to 0),
silently discarding real traffic. Extracted the decision into
nextTrafficBaseline: only a reload (syncconf) preserves the
baseline. (Finding 13)
- portfwd.go: exported ForwardedPortsInclude; inbound_amneziawg.go's
new checkForwardedPortsConflict uses it to reject, at save time, a
client's forwardedPorts that would DNAT the panel's own port or
another enabled inbound's port to the tunnel client --
portForwardLines has no destination restriction, so this collision
was previously silent. Wired into both the single-client update path
and the add-client path (client_inbound_apply.go), plus
normalizeAmneziaWGSettings for the whole-inbound save path. (Finding 14)
- inbound.go: InboundOption.AwgServer sent the whole ServerSettings
struct including PrivateKey to GetInboundOptions callers -- a
shared, admin-wide dropdown-filling endpoint the frontend's own
AwgServerOptionSchema never reads that field from. Redacted it
before assigning. (Finding 11)
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): don't widen the peer address pool past AmneziaWG's own subnet
Completes Finding 12 from the automated PR review (the serverAddress half
of this finding was already fixed on main and cherry-picked here). This
half is specific to this branch: allocateWireguardAddress's /16
pool-widening fallback is an independent addition from upstream's own
main that this branch inherited during the cherry-pick rebase -- it
doesn't exist on the fork's own main at all, so this fix can't be
cherry-picked the normal way and is committed directly here.
Widening is safe for WireGuard's own Xray-native inbound (AllowedIPs
isn't tied to a strict kernel interface subnet), but AmneziaWG's kernel
interface Address is exactly the configured subnet -- an address
allocated from the containing /16 once the /24 fills up would be
silently unroutable. allocateWireguardAddress now takes an explicit
allowWidening bool: WireGuard's own caller passes true (unchanged
behavior), AmneziaWG's passes false (fails loudly on exhaustion instead).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* docs(docker): note that AmneziaWG doesn't work in this image
Investigated: the image is Alpine-based, and AmneziaWG's own packaging
(DKMS module + amneziawg-tools) doesn't target Alpine/musl at all --
unlike the Debian/Ubuntu/Fedora/Arch paths install.sh already handles,
there's no package to apk add even with full host network/capabilities.
The panel already degrades gracefully (IsAwgInstalled() logs one warning
instead of retrying forever), so no code change is needed -- just made
the reason explicit at the point where a user would reach for cap_add/
network_mode to try to work around it.
* fix(sub): include amneziawg inbounds in subscription links
getInboundsBySubId's SQL protocol allowlist never had 'amneziawg' added,
so every AmneziaWG client was silently excluded from all three
subscription formats (plain/individual links, JSON, Clash) and from the
Telegram bot's QR/individual-link buttons, which fetch through the same
path. genAmneziaWGLink itself was already fully implemented and already
wired into GetLink's dispatch switch -- it just never got a chance to
run. Same bug shape as the earlier TRACKED_PROTOCOLS frontend gap: a
hardcoded protocol list one entry short.
Found while investigating whether the Telegram bot needed AmneziaWG-
specific client-management code -- it doesn't (the bot itself is fully
protocol-agnostic), but this is the actual root cause of "can't share
an AmneziaWG client's config via the bot."
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(inbound): enforce node-eligibility server-side, not just in the UI
Investigated multi-node interaction with AmneziaWG: the master's own
reconcile (DesiredAmneziaWGInstances) and Xray config generation
(injectAmneziawgEgress, the GenXrayInboundConfig protocol skip) all
correctly filter on NodeID IS NULL, so a node-assigned AmneziaWG (or
MTProto) inbound would never be managed by the master. But nothing
stopped one from being created that way: NODE_ELIGIBLE_PROTOCOLS
(frontend/src/pages/inbounds/form/InboundFormModal.tsx) only hides the
node picker client-side -- a direct API call could set nodeId on an
AmneziaWG inbound, which every node then reconciles as an ordinary
local inbound (nodes run the identical binary, full cron suite
included), leaving it running unmanaged and untracked by the master's
own AmneziaWG bookkeeping.
Added isNodeEligibleProtocol (inbound_protocol.go), mirroring the
frontend's allowlist, and enforced it in both AddInbound (the actually
exploitable path -- nodeId comes straight from the request) and
UpdateInbound (defense in depth; NodeID is already restored from the
stored row there before this check, so it mainly guards against a
protocol change on an existing node-hosted inbound).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): allow TPROXY-marked traffic through a default-deny INPUT chain
TPROXY never rewrites a packet's own destination address, only the routing
decision. A default-deny firewall whose INPUT chain sanity-checks "is this
destination actually local" (UFW's ufw-not-local, via addrtype --dst-type
LOCAL, is a concrete example) silently drops the redirected packet before
Xray's socket ever sees it -- RouteThroughXray looked fully configured
(TPROXY rule present and counting, Xray listening with IP_TRANSPARENT set)
yet every peer's traffic vanished with no trace on either side.
Adds an idempotent, never-torn-down "iptables -I INPUT 1 -m mark --mark
<fwmark> -j ACCEPT" alongside the existing shared policy route, so this
works regardless of which firewall manager owns the rest of the INPUT chain.
* fix(frontend): give AmneziaWG the same UDP tag and its own tag color
The Inbounds list only special-cased isWireguard/isHysteria for the "UDP"
network badge, so an AmneziaWG row showed just the bare protocol tag with
no transport badge next to it. Added the missing isAmneziawg flag (mirrors
isWireguard exactly) and wired it into the same branch.
Client-row protocol-color maps in ClientsPage/HostList had no amneziawg
entry, silently falling back to grey -- ClientInfoModal already had
amneziawg: 'yellow' from earlier work, these two just never got it.
* feat(logs): show which AmneziaWG client an access-log line belongs to
The dokodemo-door TPROXY bridge every AmneziaWG peer's traffic is routed
through has no per-user identity, so Xray's own access log never carries an
"email:" token for these lines -- the Access Logs modal showed a blank
Email column for every in-*-udp row, even though every other protocol's
rows show the client normally.
The peer's decapsulated tunnel IP does survive as the log's "from" address,
and that IP deterministically maps to exactly one configured peer. Builds a
"<inbound tag>|<ip>" -> email index from the same AmneziaWG inbounds already
parsed elsewhere (amneziawg.InstanceFromInbound), and fills in Email from it
whenever the raw log line didn't have one.
* fix(amneziawg): enable sniffing on the TPROXY bridge
Domain-based Routing rules could never match RouteThroughXray traffic: an
AmneziaWG peer resolves DNS itself, through the tunnel, before ever sending
a packet, so the decapsulated traffic TPROXY hands to the bridge is already
a bare destination IP with no domain name attached at the network layer.
Every other inbound recovers this via sniffing (confirmed working for the
stock wireguard inbound, which does have it configured); the bridge never
got a sniffing block at all, so only tag/IP/network-based rules could ever
match it -- any domain rule above it in the list was silently unreachable.
* docs: add an AmneziaWG config page and list it as a supported protocol
Closes the PR checklist gap: the feature shipped with zero mention on
the docs site. Mirrors reality.mdx's structure (key settings, setup
steps, config excerpt) and notes the Docker/multi-node/Telegram-bot
caveats the PR itself is honest about not having confirmed.
* fix: address the fresh review round on PR #6105 (8 findings)
1. hostRulesFingerprint didn't account for ForwardedPorts when
RouteThroughXray was off, so re-IPing a peer with port-forwarding
configured left stale DNAT rules pointing at an address the next
peer could be handed.
2. Server/client config values (keys, email, I1) were never validated
for control characters before being written into the generated
.conf; a newline could smuggle a PostUp hook into awg-quick's
parser. Added ValidateConfigValue at save time and a
sanitizeConfigValue backstop at render time.
3. checkForwardedPortsConflict didn't scope to node_id IS NULL, so a
port used only on a different node produced a false collision; also
hoisted the panel-port/inbounds lookup out of the per-client loop
(portConflictContext) so N clients cost one query, not N.
4. PostDown commands were ";"-joined and abort on the first failure;
appendOrTrue makes teardown best-effort so an external firewall
flush can't leave DNAT rules to accumulate across bounces.
5. The "ip rule list | grep -q" existence check could SIGPIPE under
pipefail and re-add a duplicate rule; switched to grep -c >/dev/null.
6. Ported the vpn:// share-link format (base64url of the plain .conf
text, matching the real AmneziaVPN app) onto this branch -- it had
only ever landed on our own fork's main, so this PR branch was still
on the old amneziawg://+query-params scheme our own docs no longer
described. Also corrected the docs' install.sh claim (opt-in/
interactive, not automatic) and stale pre-opt-in comments in
route_egress.go.
7. install.sh: Arch's ndppd install used pacman -Syu (full system
upgrade) instead of -Sy like every other call in the script; and
should_install_amneziawg re-prompted on every `x-ui update` even
when awg was already installed.
8. CollectTraffic could clobber a concurrent restart's freshly-reset
(empty) traffic baseline with stale pre-restart counters, since
getPeerStats runs lock-free; now checks pointer identity before
writing back. sweepOrphansLocked permanently disabled itself on a
transient os.ReadDir failure instead of allowing a retry.
go build/vet/test and frontend typecheck/lint/build/vitest all pass.
* fix(install.sh): check the live sysctl value, not sysctl.conf text
Reviewer feedback (cherts, PR #6105): grepping /etc/sysctl.conf for the
setting name is unreliable -- many distros split sysctl config across
/etc/sysctl.d/*.conf, and /etc/sysctl.conf can be a symlink into that
directory, so the check can miss an already-active setting (harmless
duplicate append) or match a disabled/commented line (forwarding
silently stays off). Query the live value via `sysctl -n` instead,
which is accurate regardless of which file set it. Applied the same
fix to both the IPv6 and IPv4 checks for consistency.
* fix: update inbound_amneziawg.go to the split buildInboundForLocalRuntime
Same fork-only-file blind spot as the one caught on our own main after
the 3.6.0 sync: upstream split buildRuntimeInboundForAPI into
buildInboundForNodePush / buildInboundForLocalRuntime (part of the
node-sync client-deletion fix, 5bc81dfd), updating every call site it
could see. This file doesn't exist upstream, so it kept calling the
old name even after the branch merged in that commit.
* fix(frontend): recognize AmneziaWG's vpn:// scheme in share-link labels
The shared link-tag/label helper (used by the client info modal, QR
modal, and subscription page) had no entry for the vpn:// scheme
AmneziaWG links use, so it fell through to the generic fallback: a
plain "Vpn" tag with no color, and an empty remark/port that made the
row's title fall back to "Link N" instead of the inbound's actual
name:port — unlike every other protocol, which shows its real tag and
label.
vpn:// links are base64url of a plain .conf text (matching the real
AmneziaVPN app's own share-link format), not a structured URL, so
there's no query string or #hash to read a remark/port from. Decode
the payload and pull the remark/endpoint back out of the .conf text
directly instead.
* fix(xray): force a full restart for TPROXY inbounds, never hot-add them
Real incident: an AmneziaWG inbound with RouteThroughXray enabled lost
all internet on that connection after a migration. Root-caused on the
live box -- iptables TPROXY counters were incrementing (packets
correctly redirected to 127.0.0.1:63110), but nothing was actually
listening there (ss showed nothing on that port) until a full
`systemctl restart x-ui`, after which the bridge came up immediately.
Xray-core's gRPC AddInbound reports success for a new sockopt.tproxy
inbound (internal/amneziawg's own Xray egress bridge is the only kind
this fork ever generates) but doesn't reliably bind a working listener
for it outside of process startup -- the bridge silently never comes
up, and RouteThroughXray traffic goes nowhere until the next full
restart happens to occur for an unrelated reason.
diffInbounds already has this exact defensive pattern for REALITY
inbounds ("a gRPC remove+add does not reliably rebuild the REALITY
authenticator"), just never extended to TPROXY, and only in the
already-existing-then-changed branch -- the "brand new inbound" branch
had no such guard at all, which is exactly the path a freshly-enabled
RouteThroughXray bridge takes. Added inboundUsesTproxy and wired it
into both branches.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): flag Xray for resync when a peer edit changes qualifying state
Real production bug, root-caused on iiadmin-vps: updateAmneziaWGInbound/
AddInbound/DelInbound only ever updated the kernel interface via
amneziawg.GetManager() -- they never called SetNeedRestart the way every
other protocol's mutation path does (client_crud.go, inbound.go, etc. all
do). injectAmneziawgEgress's TPROXY bridge inbound depends on
InstanceFromInbound finding at least one qualifying peer plus
RouteThroughXray, so an edit that flips that (first peer added, last one
removed, RouteThroughXray toggled on) previously required a full panel
restart before the bridge actually got created, with no error anywhere:
the kernel interface would handshake fine, but traffic redirected into the
bridge's TPROXY port went nowhere because nothing was listening there.
diffInbounds/inboundUsesTproxy already correctly force a full restart for
a brand new TPROXY inbound (bdee0a20) -- that part was never the bug. The
gap was entirely upstream: nothing ever told Xray a resync was even needed.
* fix(clients): reject AllowedIPs already used on another WireGuard/AmneziaWG inbound
defaultWireguardClients/defaultAmneziaWGClients only ever checked uniqueness
against their own inbound's client list, so two inbounds sharing a subnet
(same protocol or not) could silently hand out or accept the same address --
the exact scenario behind a real duplicate-IP incident where a WireGuard and
an AmneziaWG client both ended up on the same address. otherTunnelAllowedIPs
now collects every address already claimed on every other tunnel inbound and
folds it into both the auto-allocation pool and the manual-entry collision
check, naming the other inbound in the error when it fires.
* fix(frontend): add the missing AmneziaWG config download on the sub page
The subscription page already gave WireGuard links their own "Config"
block (copy/download/QR of the actual .conf, via wireguardConfigFromLink
reversing the wireguard:// query params) but had no equivalent for
AmneziaWG's vpn:// links -- its isWireguardLink gate never matched them,
and no reverse-parse helper existed for this page specifically. Every
other surface (InboundInfoModal, ClientInfoModal, ClientQrModal) already
had this parity; this was the one page that didn't.
Fixed by adding amneziawgConfigFromLink (inbound-link.ts), simpler than
its WireGuard counterpart since a vpn:// payload already *is* the plain
.conf text -- just base64url-decode it, no query-param reconstruction
needed -- and wiring it into SubPage.tsx alongside the existing WireGuard
block, reusing the same pages.clients.amneziaWgConfig label the other
three surfaces already use.
* fix(xray): force a full restart for password-auth SOCKS5 hot-apply
Real production incident: editing a client under an AmneziaWG inbound
left its embedded SOCKS5 relay's settings byte-different (a new account
list), and Xray's gRPC remove+add hot swap silently dropped the account
for a peer whose email contained non-ASCII characters -- its tunnel kept
handshaking fine but all its traffic got rejected at the SOCKS5 layer,
while every other peer on the same relay was unaffected. A full restart
(reading the same JSON straight from disk) always produced the correct
account list. socks isn't in userDiffableProtocols (that only covers
vless/vmess/trojan's clients+email shape, not accounts+user), so any
settings drift on this inbound fell through to the generic remove+add
path. Forces a restart instead, the same defensive choice already made
for REALITY and TPROXY -- scoped to auth:"password" specifically so the
other, noauth SOCKS5 bridges (panel/node/mtproto egress) keep the cheaper
hot path.
* Fix Attach reusing one identity's address across wg/awg inbounds
ClientService.Attach deliberately copies one identity's stored
AllowedIPs into every WireGuard/AmneziaWG inbound it's attached to
in the same call, so the same person gets the same tunnel address
on every protocol they use. Its loop calls addInboundClient once per
inbound, and each of those independently computes
otherTunnelAllowedIPs -- so by the second inbound in the batch, the
first inbound's just-written copy of this identity's own address
looked like a cross-inbound collision against itself.
Real production symptom this caused: detaching then re-attaching a
client to both wg and awg failed with "wireguard: allowedIPs entry
X is already used by a client on inbound 'awg' (#N)" -- the exact
address the identity is supposed to keep, rejected as if it belonged
to someone else.
Add a selfEmails exclusion to otherTunnelAllowedIPs and populate it
from the client(s) being processed at the one real call site. Safe
unconditionally: ClientRecord.Email is globally unique, so a match
can only ever be this same identity's own entry on a sibling inbound,
never a genuine different client's address.
Reproduced the underlying mechanism live (manual entry correctly
rejected as a cross-inbound collision; fresh auto-allocation
correctly avoided a used address) before writing the fix, to confirm
the guard itself works and the bug is specifically in how Attach's
per-inbound calls interact with it.
* Attach: allocate fresh when re-attaching with no active tunnel
The previous fix (82cc69f5) made Attach's own address-reuse
correctly not collide with itself across inbounds -- but it still
always reused an identity's stored AllowedIPs verbatim, even when
that identity currently has zero WireGuard/AmneziaWG attachments at
all. A real report from testing this live: an identity fully
detached from both its wg and awg inbounds, then re-attached, got
its old address back even though several lower addresses were free
-- because nothing about being fully detached ever cleared the
stored value Attach copies from.
Add hasTunnelAttachment, checked once against the identity's CURRENT
inbound set before Attach's loop runs: if none of its current
inbounds is WireGuard/AmneziaWG, clear the stored AllowedIPs so this
attach allocates fresh (matching what a brand-new client would get)
instead of resurrecting an address nothing reserves anymore. Left
alone when the identity already has an active tunnel elsewhere, so
extending it to a second protocol still keeps a consistent address.
* Fix TestOtherTunnelAllowedIPsExcludesSelfEmail's own test setup
CI caught this: the "genuinely different client" (other@wg) was
seeded onto the SAME inbound passed as excludeID, which
otherTunnelAllowedIPs already excludes entirely regardless of the
selfEmails fix -- so the assertion that its address is still
reported could never have passed, proving nothing either way. Move
it onto the sibling inbound alongside shared@id, which is what the
test actually needs to exercise (two clients on one sibling, one
excluded by email, one not).
* Attach: never inherit an address that doesn't fit the target inbound
hasTunnelAttachment (from the earlier fix, commit 51067f16) only
asked "does this identity have ANY tunnel attachment", treating that
as license to reuse its stored address verbatim on every inbound
being attached. Real production case this missed: an identity's
stored address came from WireGuard's own fallback subnet
(10.0.0.0/24, used when that inbound has no other clients to infer a
base from), then got attached to a second, AmneziaWG inbound
configured for a completely different subnet (10.8.1.0/24).
defaultAmneziaWGClients's already-set-AllowedIPs branch only checks
for collisions, never subnet membership, so the mismatched address
was accepted silently -- producing a peer that can never actually
connect, since an AmneziaWG address must fall inside the kernel
interface's own configured subnet to be routable at all.
Add addressesFitAmneziaWGInbound, checked per inbound inside Attach's
loop: if the inherited address doesn't fit the SPECIFIC inbound being
attached, clear it just for that one so it gets a fresh, valid
allocation instead, while other already-attached inbounds keep their
existing values. WireGuard has no equivalent strict subnet
requirement (allocateWireguardAddress can widen to a fallback pool
for it), so this only ever constrains AmneziaWG targets.
* Give WireGuard an explicit, admin-configurable subnet field
WireGuard previously had no configurable subnet at all -- only an
implicit one, either inferred from existing clients' own addresses
(wireguardAllocationBase) or a hardcoded 10.0.0.0/24 fallback when
none exist yet. AmneziaWG, by contrast, has always had a real
server.subnetIp/subnetCidr field in its settings, editable in the
UI. User request: give WireGuard the same treatment.
Backend: explicitWireguardSubnetBase reads an optional subnetIp/
subnetCidr pair from the inbound's own settings JSON (mirroring
AmneziaWG's defaultAmneziaWGSubnetBases). defaultWireguardClients
checks it first; only when unset does it fall back to today's
inference-from-existing-clients behavior, so an inbound saved before
this field existed keeps working exactly as it always has.
Frontend: subnetIp/subnetCidr added to WireguardInboundSettingsSchema
and the inbound form (mirroring AmneziaWG's own field layout/labels),
with a real default (10.0.0.0/24, the same value the backend already
fell back to) seeded for newly created inbounds so the field starts
populated and editable rather than blank. Translated across all 13
locales.
This also structurally closes the class of bug fixed in
82cc69f5/291c47b3: with wg and awg subnets explicit and
independently controllable, an admin who wants matching addresses
across both protocols can configure them to actually agree, instead
of one silently inheriting the other's incompatible range.
* Split the client edit form's AllowedIPs into per-protocol fields
A client attached to both WireGuard and AmneziaWG shared one AllowedIPs
form field with a dynamically-switching label, so its two genuinely
different addresses could never both be shown or edited correctly.
Worse, Update/Create broadcast that one shared value to every attached
wg/awg inbound with no subnet-fit check, so an ordinary edit save could
silently overwrite one protocol's address with the other's -- the same
bug class already fixed for Attach, but reachable from any client edit.
model.Client gains an optional AllowedIPsByInbound map so a caller can
send distinct values per inbound; Update/Create honor it and, when it's
absent, clear a shared value that doesn't fit an AmneziaWG inbound's own
subnet instead of writing it through. A new TunnelAllowedIPsByInbound
read path feeds the real per-inbound address to the client edit form via
GET, which now renders two separate, correctly-labeled fields whenever
both protocols are attached (unchanged single dynamic field otherwise).
* Regenerate openapi.json for the new allowedIPsByInbound field
Follow-up to 878ee839: gen:zod (frontend/src/generated) was already
regenerated and committed, but gen:api (frontend/public/openapi.json)
wasn't, so CI's codegen drift check failed.
* Fix build breakage from merging upstream main: Update() gained a limitHwid param
Two of our own AllowedIPs tests (not present upstream, so the merge never
flagged them as conflicting) still called the old 3-arg Update(inboundSvc,
id, client) -- upstream's hardware-ID-limit feature added a required
limitHwid parameter that every other caller in this package already
passes. Also drop createDefaultInboundSettings from InboundsPage.tsx: the
merge conflict resolution kept the import, but upstream's clone-payload
refactor (buildClonePayload, inbound-clone.ts) already calls it
internally now -- this file doesn't need it directly anymore.
* Fix real bug: AmneziaWG clients rejected as "empty client ID" in 3 places
Three switch statements on inbound.Protocol handle "wireguard" explicitly
(checking client.PublicKey) but fall through to the default case for
"amneziawg" (checking client.ID, which AmneziaWG clients never set --
they use PublicKey/Email like WireGuard, not the VMess/VLESS UUID field).
This is what the 4 AllowedIPs tests were actually catching:
UpdateInboundClient's newClientId derivation hit this same default branch,
so every Update() on an AmneziaWG client returned "empty client ID"
before ever reaching the AllowedIPs logic being tested.
Fixed by adding "amneziawg" alongside "wireguard" in each switch:
addInboundClient's per-client validation, UpdateInboundClient's
newClientId derivation, and AddInbound's per-client validation (the
third one wasn't hit by these tests, but has the identical bug -- creating
a brand-new AmneziaWG inbound with a client attached would fail the
same way).
* refactor(amneziawg): rename Obfuscation20 to Obfuscation31, drop the dead mobile preset
Mechanical rename ahead of the AmneziaWG 3.1 parameter work: the type,
generator and prose all said 2.0, and the "mobile" generator preset was
reachable only from its own test. No behavior change.
* feat(amneziawg): AmneziaWG 3.1 obfuscation parameters (backend + generated schemas)
Adds the 3.1 parameter surface to the inbound settings and both Go config
emitters: I2-I5 signature packets, HeaderProtectionKey (base64 32-byte,
shared server<->client), ContentPaddingAddition, the five handshake-timing
randomization ranges (RekeyAfterTime/RekeyTimeout/RejectAfterTime/
KeepaliveTimeout/MaxHandshakeAttempts), and the RandomTrailers/
DisableCookies switches. Freshly generated sets fill everything except
I2-I5 (matching Amnezia's own generator) with jittered ranges bracketing
WireGuard's stock timing constants; every reject window starts >= 30s
above the rekey window by construction. Empty fields stay off the wire,
so blanking a field disables just that feature.
Validation generalizes the H1-H4 range checker for the new uint32-range
fields, requires min 1 on timers, cross-checks rekey-vs-reject, and
demands a real 32-byte base64 header-protection key. The manager warns
once per process when the installed awg tools predate 3.1 but an inbound
uses 3.1 parameters (awg-quick rejects unknown keys with a generic
error otherwise); apply still proceeds.
Requires amneziawg-tools v3.1.20260812+ / module or amneziawg-go
v3.1.20260814+ on the host.
* feat(amneziawg): emit and randomize 3.1 parameters in the frontend
Both client-config emitters (the vpn:// link builder and the clients-page
.conf builder) now carry the 3.1 [Interface] lines in the same order as
the Go emitters. The obfuscation randomizer moves out of InboundFormModal
into a shared lib/xray/amneziawg-obfuscation.ts that also fills the new
fields, and createDefaultAmneziawgInboundSettings switches from static
values to that generator — a fresh inbound now really gets the unique
fingerprint the docs promise instead of the same jc=5/jmin=10 set on
every install.
Schema parse-time defaults for the new fields stay ''/false on purpose:
real values come only from the generator, so resaving an inbound never
mutates its stored parameters. A new parity test pins the hand-written
AmneziawgServerSchema to the generated ServerSettings key set, so a field
added on one side can no longer silently vanish from configs.
* feat(amneziawg): 3.1 form fields and translations
Inbound form gains inputs for I2-I5, HeaderProtectionKey (filled by the
existing obfuscation Regenerate button), ContentPaddingAddition, the five
timing ranges, and the RandomTrailers/DisableCookies switches; the MTU
input picks up the min=1 its schema already enforced. All 13 locales get
the 19 new keys and drop the "2.0" branding from the s3/s4/i1 labels.
* docs(amneziawg): document 3.1 parameters; install.sh kernel/version notes
The AmneziaWG page's obfuscation section moves from the 2.0 to the 3.1
parameter set: table rows for I2-I5, HeaderProtectionKey,
ContentPaddingAddition, the timing-randomization ranges and the
RandomTrailers/DisableCookies switches, a requirements callout (tools
v3.1.20260812+, module/awg-go v3.1.20260814+, Linux 6.7+ for the DKMS
path), and a sample client .conf that matches what the panel actually
emits (including the DNS defaults and PersistentKeepalive it always had).
install.sh warns before a DKMS build on a pre-6.7 kernel and after any
install that left pre-3.1 amneziawg-tools on PATH.
Also updates the hosts API operation paths ({id} -> {groupId}) in the
stale ru/zh/fa reference pages: syncing docs/public/openapi.json for the
new AmneziaWG schema fields surfaced that rename, which had never been
copied over, and the docs build fails on paths missing from the spec.
* fix(amneziawg): reject control characters and canonicalize 3.1 range values
Adversarial review of the 3.1 work surfaced a validation gap:
base64.DecodeString silently ignores CR/LF, so a header-protection key
that picked up a line wrap in transit decoded to a valid 32 bytes,
passed validation, and was emitted verbatim into every client config —
where the orphan second line breaks the import while the server (whose
emitter strips control chars) keeps running with the correct key. The
key and range validators now reject control characters outright.
Also from the same review: range values are canonicalized on save
("110 - 140" -> "110-140", whitespace-only collapses to feature-off,
closing a case where the server conf rendered an invalid blank-value
line the client emitters omitted); the rekey/reject invariant is now
enforced against WireGuard's 120s/180s defaults when only one side is
set; and the structural fingerprint joins on "\n" instead of "|",
which is a legal I1-I5 character and made adjacent free-text fields
join-ambiguous.
* fix(install): resolve latest release tag via web redirect to dodge API rate limits
The non-interactive install smoke test resolved the release version through
the unauthenticated GitHub API (api.github.com/.../releases/latest), which
allows only 60 requests/hour per IP. The test installs twice in one run, and
on shared CI runner IPs the second call gets rate-limited, returns no
tag_name, and install.sh treats an empty version as fatal (exit 1) — the same
"Failed to fetch x-ui version" real users hit behind CGNAT/shared addresses.
resolve_latest_tag() now reads the tag from the github.com releases/latest
web redirect (not subject to the API rate limit), falling back to the API
only if the redirect yields nothing. Verified with the real
deploy/test/smoke-noninteractive.sh (two installs, both green).
* fix(amneziawg): three review findings on #6105, plus a comment trim
1. A peer's allowedIPs reached the generated .conf unvalidated and
unsanitized, unlike email/publicKey/preSharedKey which
normalizeAmneziaWGSettings already guards. A newline in an entry let a
following "[Interface]" re-open the interface section, whose "PostUp = ..."
awg-quick then runs as root on the next apply. Reproduced end to end
against generateServerConfig. The save path now rejects and canonicalizes
through normalizeWireguardAllowedIPs, and the render path sanitizes as a
backstop for rows predating the validation (an upgrade, a restored backup,
a direct DB edit). H1-H4 get the same render-time sanitize, and the two NIC
name fields a plausibility check, since stripping control characters alone
would still let a shell metacharacter into a root-executed PostUp line.
2. EgressPortForInbound is 63100 + inbound id, so an id past 2435 derives a
port above 65535 -- and Xray rejects the whole generated config over one
invalid port, taking every other protocol down with it. It now reports
ok=false past the range, and both the Xray bridge and its TPROXY rules are
skipped instead of emitting an impossible port.
3. The downloadable AmneziaWG .conf read ClientRecord.allowedIPs, a single
shared column that holds the WireGuard address for an identity attached to
both protocols -- the exact ambiguity tunnelAllowedIPs was added to resolve
for the edit form. The info and QR modals already hydrate that field, so
they now pass this inbound's own address to the builder.
Also trims the comment blocks in the files touched here to the 2-line
guidance in CLAUDE.md: internal/amneziawg alone carried 423 comment lines in
over-long blocks against 118 for the comparable internal/mtproto, and is now
at 110. Every non-obvious constraint is kept (the kernel S1/S2 rule, why
PostDown is best-effort, why grep -c and not -q, why the fingerprints split
three ways); the narration is gone. Two hot_diff.go comments pointed at an
internal/amneziawgnet package and an injectAmneziawgnetSocks function that
exist nowhere in the tree; the checks themselves are unchanged.
* feat(logs): add an AmneziaWG log view to the overview
The overview has an access-log view for Xray but nothing for AmneziaWG, so
when a tunnel misbehaves there is no way to see it from the panel at all. A
kernel tunnel logs no per-request lines, so the equivalent view is built from
the two things it does expose:
- Live per-peer activity from `awg show <iface> dump`, joined to the client
email through the desired peer set: last handshake, endpoint, allowed IPs,
cumulative transfer and online state, newest handshake first.
- The panel's own AmneziaWG event lines (interface up/down, awg-quick
failures, the pre-3.1 tools warning), which are what actually explain a peer
being absent from the table.
POST /panel/api/server/amneziawglogs/:count serves both, with the same
count + filter contract GetXrayLogs uses, and the modal mirrors XrayLogModal's
toolbar, auto-update, mobile cards and download. The action-bar button is
gated on a new status.amneziawg.configured, which stays true while an inbound
exists but its interface is down -- exactly when the event lines matter.
Verified against a running panel: the endpoint returns the peer table and
real event lines ("awg/awg-quick not found on PATH", "create config dir:
permission denied"), and count and filter both narrow as documented.
One of those lines surfaced a Debugf that had been rendering as
"for inbound1:amneziawg:"; fixed here since it is now user-visible.
* fix(amneziawg): stop double-counting a routed inbound's traffic
injectAmneziawgEgress tags its Xray bridge with the AmneziaWG inbound's own
tag, so the stock Routing page can target it. Xray therefore reports that
bridge's bytes under the inbound's tag, and XrayTrafficJob feeds them to
AddTraffic -- which accumulates -- on top of the same bytes AmneziaWGJob
already reported from `awg show dump`. An inbound with routeThroughXray on
counted roughly twice its real traffic, which also inflates the quota checks
that read the same counters.
The awg counters are the complete measure: every peer, whether or not TPROXY
routed it, and the same wire bytes the per-client totals are built from, so
they stay and the Xray rows are dropped. Per-client stats were never affected
-- a dokodemo-door bridge has no per-user identity, so Xray emits no
user>>>email rows for it.
Filtering happens before every consumer, so the DB totals, the external
traffic inform and the dashboard's live speed all read one source per inbound.
The set of bridge tags now comes from a predicate shared with
injectAmneziawgEgress itself, with a test that pins the two together -- naming
one tag too few doubles the traffic again, one too many makes real traffic
vanish.
* fix(amneziawg): align the three .conf emitters on one peer field order
The panel builds an AmneziaWG client .conf in three independent places, and
they disagreed: buildAmneziaWGClientConfig put PresharedKey right after
PublicKey (wg-quick(8)'s own order, and what both WireGuard emitters on the
clients side already use), while genAmneziaWGConfig and the Go
amneziaWGConfigText put it after Endpoint. A user comparing a subscription
link against a downloaded .conf sees the difference immediately, and the
generators are exactly the kind of parallel implementation CLAUDE.md warns
about drifting.
Moves the two outliers onto the wg-quick order. Also drops the stray trailing
newline that only appeared when PersistentKeepalive was set, so a config now
always ends on its last set field whichever that is -- the same shape all
three emitters produce for the same client.
Parsing is unaffected either way (the format is order-insensitive, and the
AmneziaVPN app reads it as a flat key-value bag), so this changes only the
rendered text. Adds a test on each side that pins the peer block's field
order, since nothing previously asserted it.
* refactor(amneziawg): switch to the embedded amneziawg-go/gVisor architecture
Replaces the kernel-module (DKMS) + awg-quick + TPROXY backend with the
fork's own embedded design: amneziawg-go runs in-process over a userspace
gVisor netstack, and each peer's decapsulated traffic relays into its own
loopback Xray SOCKS5 inbound, so Xray's native stats/sniffing/routing work
for free instead of through hand-rolled bridges. No kernel module, no DKMS,
no Secure Boot conflicts, works the same in a container as on bare metal.
- internal/amneziawgnet: new package (Device/UAPI, gVisor netstack, TCP/UDP
forwarding, SOCKS5 relay, peer identity, IPv6 host-alias egress identity,
per-client port-forwarding) - amneziawg-go v3.1.20260814 + gvisor.
- internal/amneziawg: keep the reusable protocol-shape types/validation
(Instance/Peer/Obfuscation, InstanceFromInbound); drop the OS-shellout
half (awg-quick, TPROXY policy routing, NDP proxy, peer-stats parsing).
- internal/web/service: rewire the 5 integration points (job, runtime,
client-apply, web shutdown, xray config) from the old manager to the new
one; the AmneziaWG log view is rebuilt on the embedded Device's own UAPI
dump (extended to carry endpoint/AllowedIPs) instead of `awg show dump`.
- install.sh: drop DKMS/ndppd/TPROXY/Secure-Boot installer code (~250
lines) - an entire recurring class of installer fragility goes away.
- frontend: drop the now-meaningless routeThroughXray toggle (the relay is
always on); keep the field in the Zod schema, unexposed, so it isn't
silently stripped from stored settings on next save - two regression
tests deliberately depend on the Go struct still carrying it.
- docs/i18n: rewrite amneziawg.mdx for the new architecture; drop the
dead routeThroughXray translation keys across all 13 locales.
Real production throughput (embedded core datapath, isolated bench, same
box the kernel-module path was measured on): ~296 Mbit/s up, ~640 Mbit/s
down, vs. 414.69 MB/s (~3.3 Gbit/s) for the kernel module on the same
hardware - a real gap, tempered by this being single-stream/no-SOCKS5-hop
and most VPN traffic being latency-bound rather than throughput-saturating.
* fix(amneziawg): restore the branch's own Obfuscation31 shape + 2 CodeQL findings
The previous push's wholesale-copy of types.go/params.go from the fork's
main branch pulled in that branch's own independent (and incompatible)
naming for the same AWG 3.1 feature set: Obfuscation20/GenerateObfuscation20
instead of this branch's already-shipped Obfuscation31/GenerateObfuscation31,
and a missing CanonicalizeUintRange -- broke every Go CI job (the whole
matrix fails to compile when any one package doesn't, which is why govulncheck/
golangci/postgres-durable-first/race all failed identically, not just go-test).
Restores params.go/params_test.go verbatim from this branch's own last
commit (a strict superset of validation: it already cross-checks rekey vs.
reject timing windows, which the copied version never did) and folds the
3.0/3.1 fields (HeaderProtectionKey, ContentPaddingAddition, the 5 timing
fields, RandomTrailers/DisableCookies) into Obfuscation31 itself, matching
the original struct exactly instead of as separate top-level Instance
fields. instance.go, the two amneziawgnet call sites, and 7 amneziawgnet
test files updated to match. Also drops the one test (sanitizeConfigValue)
that only ever served the retired kernel-module .conf writer -- correctly
not ported, so the test testing it shouldn't have been copied either.
Also fixes 2 CodeQL findings the same push surfaced: a clamped uint64->int64
conversion for the new log view's live byte counters (server.go), and an
unneeded len+len sum feeding a slice pre-size in the v6-egress outbound
merge (xray.go) -- append already grows correctly without it.
* chore(amneziawg): regenerate frontend schemas for updated doc comments
npm run gen was missed after the previous commit's types.go doc-comment
edits (Obfuscation20 -> Obfuscation31, ValidateHeaderProtection ->
ValidateObfuscation in the prose) -- openapigen bakes those comments
into the generated schema's description field, so the committed
frontend/src/generated/schemas.ts and openapi.json still had the old
wording. codegen's git-diff-exit-code check caught it correctly.
* fix(amneziawg): narrow 2 test fixtures that collided with MaxForwardedPorts
TestCheckForwardedPortsConflict_CollidesWithEnabledInboundPort and
..._NoCollisionWhenPortsDontOverlap used "8000-8100"/"9000-9100" as their
ForwardedPorts fixture -- 101 ports each, one over MaxForwardedPorts (100).
The cap check (checkForwardedPortsConflict, added this session alongside
the SOCKS-phantom-port check) fires first, so both tests got "more than
100 forwarded ports" instead of ever reaching the collision logic they're
actually testing. The cap itself has its own dedicated boundary test
already; these two just needed a narrower range that still covers/misses
port 8080 as intended -- 8075-8085 and 9075-9085, 11 ports each.
* fix(amneziawg): checkAmneziawgnetSocksConflict had no receiver in its new home
My merge-conflict resolution kept this as a method call (s.checkAmneziawgnetSocksConflict)
inside checkPortConflictTx, a plain function with no *InboundService receiver --
upstream's #6225 fix moved the port-conflict check out of the (s *InboundService)
method and into this new tx-scoped free function, and I didn't notice the call
site needed to change shape too. CI caught it immediately (undefined: s); nothing
in this specific package can be locally verified past internal/database's own
unrelated, pre-existing CGO build issue on this dev machine.
Since the signature had to change either way, folded in the fix already flagged
as a separate follow-up: checkAmneziawgnetSocksConflict now takes the caller's
db handle instead of fetching its own via database.GetDB(), so it actually runs
inside the same serialized transaction #6225 introduced -- previously it sat
right next to that race fix without benefiting from it.
* fix: address the review findings on the embedded AmneziaWG PR
5 blocking findings:
- Floor S3/S4 at 12 in both obfuscation generators (Go and frontend) and
reject a hand-edited value below that when HeaderProtectionKey is set --
IpcSet requires it, and ~39% of previously-generated sets violated it
silently.
- Guard PrivateKey/PrimaryDNS/SecondaryDNS/remark against newline injection
in the AmneziaWG .conf builder (both the Go subscription-link path and
the frontend downloadable-config path) -- unguarded, any of them could
inject an arbitrary config line into a subscriber's client.
- Bound the derived AmneziaWG SOCKS relay port to <= 65535 once an
inbound's id is known, and check the reverse direction (does the relay
port collide with an existing inbound's port) on both create and update
-- previously only port -> relay collisions were checked, not relay ->
port.
- Gate injectAmneziawgV6Egress on the same V6AliasesActive predicate
desiredV6Aliases already uses, so the two can't disagree about whether a
peer's IPv6 identity is actually active at the OS level.
2 minor findings:
- Fix the forwarded-ports cap check's off-by-one (a spec covering exactly
the cap was rejected as if it were over it).
- Correct docker-compose.yml's stale comment describing the retired
DKMS/kernel-module architecture.
* chore: retrigger CI
build (armv5) failed on a transient Go module proxy network error
(INTERNAL_ERROR stream reset on sagernet/sing), unrelated to this PR's
changes.
* docs: fix doc comments still describing the retired DKMS/awg-quick design
A few doc comments (and one illustrative test log line) survived the
embedded-architecture cutover unchanged and now contradict the code
they sit next to:
- internal/amneziawg/types.go's package comment claimed this package
still owns a Manager that reconciles OS-level interfaces via
awg-quick/DKMS -- that Manager was removed; the reconcile loop lives
in internal/amneziawgnet now, and this package is protocol-shape-only.
- internal/amneziawg/params.go's ValidateObfuscation/ValidateConfigValue
comments cited "awg-quick up" / "awg-quick executes as root" as the
reason to validate -- the server itself never calls awg-quick in this
architecture; the same value still reaches a real rendered .conf that
a client app or an admin's own awg-quick CLI applies downstream, so
the validation is still warranted, just for a different consumer.
Mirrored the same fix in inbound_amneziawg.go's matching comment and
its test's comment.
- internal/amneziawgnet/manager.go's Manager doc comments (x3) pointed
readers at "internal/amneziawg.Manager" for comparison -- that type no
longer exists in this diff at all. Repointed at internal/mtproto.Manager,
the pattern this was actually modeled on and the one that's still real.
- Swapped one test's illustrative "awg-quick up awg2 failed" log line for
a message shaped like this architecture's actual amneziawgnet logging,
so a reader skimming the test doesn't wonder whether the server still
shells out to awg-quick.
No behavior change.
* fix(docs): re-run codegen for xray-settings.mdx after conflict merge
The automated conflict-resolution hand-merge for this generated file
was content-correct but didn't byte-match a real regen (different
YAML long-string folding style). Re-ran npm run gen + docs' gen:api
and kept that canonical output instead.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): drop the dead access-log email backfill
amneziawgEmailIndex keyed peers by "<tag>|<tunnel IP>", a scheme built
for the retired TPROXY bridge where the peer's decapsulated tunnel
address survived as the access log's from-address. The embedded
architecture relays through a loopback SOCKS5 dial, so every AmneziaWG
log line's from-address is 127.0.0.1:<ephemeral> and the lookup could
never match: the index was rebuilt on every log view just to miss.
Remove the index, its GetXrayLogs wiring and its test. If per-line
emails are wanted back, the relay would have to publish a
local-port->email registry for the viewer to resolve loopback sources.
* fix(api): generate AmneziaWGLogs/PeerActivity schemas instead of hand-writing them
The amneziawglogs endpoint's response structs were missing from
openapigen's StructAllow, so they were silently absent from every
generated schema/example, the endpoints.ts entry carried a hand-written
response, and AmneziaWGLogModal.tsx duplicated the shapes as local
interfaces - the exact drift the allowlist rule exists to prevent.
Allowlist both structs with example tags, point the endpoint at the
generated schema, import the generated types in the modal, and sync
docs/public/openapi.json.
* chore(amneziawg): drop the unreferenced quiccapture package
Nothing imports internal/amneziawg/quiccapture and no route exposes it;
its package doc justifies the code as a port of
frontend/src/lib/xray/i1Generators.ts, which does not exist in this
repository, and promises an API round-trip that also does not exist.
1,110 lines of unreachable code with misleading provenance claims.
Revert this commit to bring the package back when the live-capture I1
feature and its frontend counterpart actually land.
* fix(clients): re-run cross-inbound conflict checks on the serialized writer
The new client-level checks - cross-inbound AllowedIPs collisions and
AmneziaWG forwardedPorts conflicts - read a fresh DB snapshot, decide,
and only then enter runSerializedTx, while lockInbound only serializes
writers on the SAME inbound. Two concurrent client creates on two
different tunnel inbounds both passed the read and both committed,
yielding two peers with one address: the exact check-then-claim race
81cfd857 (#6225) closed for AddInbound, which this PR's own
checkAmneziawgnetSocksReverseConflict already cites. Keep the pre-tx
pass for fail-fast UX and re-validate inside the transaction, where the
single writer makes the answer authoritative. The race test drives two
goroutines at two inbounds and demands exactly one winner; it fails
with committed=2 when the in-tx re-check is removed.
* fix(amneziawg): hot-apply depletion disables like mtproto does
applyTrafficMutationBatch special-cases MTProto so a quota/expiry
depletion cuts the sidecar immediately, but AmneziaWG fell through to
runtime AddUser/RemoveUser - explicit no-ops for this protocol - so a
depleted peer kept tunneling until the next 10s reconcile tick. Route
it through applyLocalAmneziaWG, whose own contract (re-read committed
settings, filter depleted clients, push to the interface) is exactly
this case; the comment claiming it mirrors applyLocalMtproto is now
true for the depletion path too.
* fix(amneziawg): persist cleared DNS fields instead of resurrecting defaults
PrimaryDNS/SecondaryDNS marshaled with omitempty, so clearing them
persisted settings with no key at all - and the frontend re-parses
stored settings through a Zod schema whose .default('8.8.8.8') /
.default('8.8.4.4') fire on missing keys, silently repopulating the
form on every load and re-persisting the defaults on the next save.
Blank is a documented, meaningful state (no DNS line in client
configs); drop omitempty so a cleared value survives the round-trip.
The regression test normalizes a server block with cleared DNS and
fails when the keys are dropped.
* fix(amneziawg): accept cleared numeric obfuscation/subnet fields in the form
AntD InputNumber emits null when cleared, Zod .default() only replaces
undefined, and unlike wireguard.ts - whose optionalClearedInt comment
documents exactly this failure mode - the AmneziaWG schema declared
subnetCidr and jc/jmin/jmax/s1-s4 as bare z.number() defaults. Clearing
any of the eight fields made safeParse reject the null and block the
save until the user retyped a value. Absorb null into undefined while
keeping each field's schema default, so a cleared field refills its
documented default and legacy blobs with absent keys behave as before.
* fix(amneziawg): guard the third .conf emitter against newline injection
The review-round fix added the newline guard to amneziaWGConfigText (Go)
and buildAmneziaWGClientConfig, but genAmneziaWGConfig in inbound-link.ts
- the third of the three emitters its own comment says must not drift -
still rendered privateKey/primaryDns/secondaryDns/remark unescaped, so a
newline there injected a config line (e.g. a rogue PostUp) into the
inbound form's downloaded .conf. Add the same guard, plus the regression
tests the original fix shipped without: all four fields on the Go and
both frontend emitters go red if any guard is removed.
* test(amneziawg): pin the S3/S4 floors the TS drift guard claims to mirror
The test's docstring says it mirrors internal/amneziawg/params_test.go,
but it asserted S3>=8/S4>=4 while the Go test and both generators pin
12/12 - the floor ValidateObfuscation enforces whenever a header
protection key is set, which this generator always sets. A regression
narrowing the TS floors into 8-11/4-11 would have passed the drift
guard and produced configs the backend rejects on save.
* docs: restore the pia repo-map entry and document the AmneziaWG subsystem
Merging main dropped CLAUDE.md's internal/pia/ bullet (added by #6272)
while resolving the repo-map conflict - the package itself is untouched.
Restore it, add the missing map entries for the two packages this branch
introduces (internal/amneziawg/, internal/amneziawgnet/), bump the cron
count, and give amneziawg_job its row in architecture.md's 5.4 table.
* chore(amneziawg): correct comments stranded by the architecture pivot
ae77c7e9's cutover to the embedded gVisor path deleted the kernel-module
code but left several comments describing it in the present tense:
hot_diff.go cited the removed service.amneziawgEgressStreamSettings and
wrongly claimed AmneziaWG is the only sockopt.tproxy source (tunnel's
TProxy mode is the live one the guard protects), socks_config.go pointed
at the deleted EgressBasePort/EgressPortForInbound, manager.go referred
to the deleted Manager and its fingerprinting as live code, web.go's
cron registration claimed the job scrapes traffic (its own doc says it
does not), and types.go capped ContentPaddingAddition at uint16 when
validation and upstream both use uint32.
* style(lint): satisfy gofumpt/goimports so make verify is green
json_service.go's two 'Tag: "proxy"}' literals came in with main's own
cc245a90 formatting commit and fail the repo's gofumpt gate for everyone;
the import grouping in inbound_amneziawg.go is from the serialized-writer
fix on this branch.
---------
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
Co-authored-by: claude[bot] <41898282+claude[bot]@users.noreply.github.com>
2026-08-23 17:41:15 -07:00
|
|
|
tunnelAllowedIPs, err := a.clientService.TunnelAllowedIPsByInbound(&a.inboundService, rec.Email, inboundIds)
|
|
|
|
|
if err != nil {
|
|
|
|
|
return nil, err
|
|
|
|
|
}
|
feat(api): add GET endpoint to look up clients by Telegram ID (#5945)
* feat(api): add GET endpoint to look up clients by Telegram ID
GET /panel/api/clients/getByTgId/:tgId returns all clients matching the given Telegram user ID. tgId is not unique, so the response is an array of {client, inboundIds, externalLinks, usedTraffic} objects.
* fix: guard tgId=0 sentinel, index tg_id, deduplicate enrichment in getByTgId
Three issues from the code review on the new GET /panel/api/clients/getByTgId/:tgId
endpoint: the lookup did not short-circuit tgId <= 0 (this codebase's sentinel
for 'no Telegram ID'), had no index on clients.tg_id causing a full table scan
on every call, and duplicated the per-record enrichment (inbound IDs, external
links, effective flow, traffic) identically between get and getByTgId.
- Reject tgId <= 0 in GetRecordsByTgId with a clear error, matching the
'0 = none' convention used elsewhere in the codebase.
- Add index:idx_clients_tg_id to ClientRecord.TgID (struct tag + idempotent
startup migration for existing databases).
- Extract buildClientPayload helper used by both get and getByTgId.
- Update client_lookup_test.go to verify sentinel rejection instead of
expecting tgId=0 to be a valid lookup.
* refactor(api): move Telegram client lookup under /get/tgId/:tgId
Nest the Telegram-ID lookup beside the email lookup as /get/tgId/:tgId
instead of the flat /getByTgId/:tgId, so both client fetch routes share the
/get prefix. Gin resolves the static tgId segment ahead of the :email
wildcard, so /get/:email keeps matching plain email lookups, including a
literal 'tgId' email. The endpoint is unreleased, so no compatibility
concern.
2026-07-28 13:38:44 -07:00
|
|
|
return gin.H{
|
feat(amneziawg): add native AmneziaWG protocol support (#6105)
* feat(amneziawg): add native AmneziaWG protocol backend
AmneziaWG (WireGuard plus DPI-resistant obfuscation) needs no Docker
here — it runs as a genuine kernel interface via awg-quick/awg, managed
the same way internal/mtproto manages mtg: one Inbound row is one
desired Instance, and a Manager reconciles running interfaces toward
the database every 10s (internal/web/job/amneziawg_job.go) plus
immediately after a client edit (applyLocalAmneziaWG).
Clients reuse model.Client verbatim (the same PrivateKey/PublicKey/
PreSharedKey/AllowedIPs fields WireGuard already uses), so bulk
operations, the QR/share-link modal and subscriptions come from the
shared inbound infrastructure instead of a parallel implementation.
internal/amneziawg owns the obfuscation param generator/validator
(ported from coinman-dev/3ax-ui, upgraded to AmneziaWG 2.0's S3/S4
padding and I1 signature packet) and the exec wrapper around
awg-quick/awg, with fingerprint-based reconcile (noop / reload-via-
syncconf / full restart) mirroring mtproto.Manager so a same-protocol
edit doesn't force an unnecessary interface bounce that would drop
every peer's connection.
Frontend and install.sh's DKMS/awg-tools setup are tracked separately;
this is backend-only.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): add frontend support and fix a Go->Zod generator gap
Wires the amneziawg protocol through the panel UI the same way every
other protocol is registered: a Zod settings schema (nested
{server, clients}, matching the Go JSON exactly), the protocol enum,
the inbound-form's per-protocol fields component and its
tab-visibility allowlist, the default-settings factory, the client
schema dispatcher, and the sniffing-capability exclusion (no Xray
inbound exists for amneziawg, same as mtproto).
Client key/allowedIPs fields are reused rather than duplicated: since
AmneziaWG clients are wire-identical to WireGuard clients (same
model.Client fields), ClientFormModal renders one shared field block
for both, switching only the visible label by which protocol is
active. The private-key input also gets a live public-key sync via a
new useEffect, because unlike WireGuard's Xray-native inbound (which
re-derives its public key at runtime and never stores one),
AmneziaWG's server.publicKey is a real persisted field the Go backend
reads directly — free-typing a new private key without this would
silently save a mismatched keypair.
Adds a downloadable per-client .conf (amneziawgConfig.ts, mirroring
wireguardConfig.ts) with the obfuscation lines, and an
InboundOption.AwgServer field on the Go side so the config builder
gets the full server block in one round trip.
Along the way, running tools/openapigen surfaced a real bug: it
doesn't flatten anonymously-embedded Go structs the way encoding/json
does, so ServerSettings embedding Obfuscation20 produced a Zod schema
with a nested `obfuscation20` key that never matches the real wire
JSON. Fixed by un-embedding (flat fields + an accessor method) and
registering internal/amneziawg in the generator's own package list,
which had been silently emitting a dangling schema reference.
English and Russian translations are complete; the other 10 locale
files still fall back to English for the new keys.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): complete frontend parity for the Inbounds list page
The Clients page (form, CRUD, QR/config) already worked from the
prior commit; this closes the remaining gap on the Inbounds side and
in a couple of protocol allowlists that a plain search for existing
wireguard/mtproto handling turned up.
lib/xray/inbound-link.ts gets amneziawg-specific link/config builders
(genAmneziaWGLink/genAmneziaWGConfig, plus the *s fan-out variants)
mirroring the wireguard ones — AmneziaWG has no legacy peers-array to
fall back to, so these read settings.clients directly and add the
obfuscation lines every client must share with the server. Wired into
genInboundLinks generically, and into three consumers that call the
wireguard builders directly rather than through that dispatcher:
QrCodeModal, InboundInfoModal, and InboundsPage's bulk export.
ClientInfoModal, ClientBulkAddModal, and the bulk attach/detach modals
each had their own protocol allowlist that needed amneziawg added
alongside wireguard/mtproto.
Two real gaps surfaced by grepping every remaining 'wireguard' /
Protocols.WIREGUARD hit in frontend/src rather than trusting the
checklist was exhaustive:
- useInbounds.ts's TRACKED_PROTOCOLS gates the deactive/depleted/
expiring/online client counts shown per inbound on the list page;
without amneziawg those counts would silently read zero.
- inbound-tag.ts is an explicit client-side mirror of the Go backend's
port_conflict.go (the file says so itself: "Keep in sync"). It still
only special-cased wireguard for UDP, so an amneziawg inbound would
have fallen through to the TCP default and disagreed with the
backend's own port-conflict math.
Also finishes translating the AmneziaWG UI strings into the 11 locale
files that were still falling back to English (ar-EG, es-ES, fa-IR,
id-ID, ja-JP, pt-BR, tr-TR, uk-UA, vi-VN, zh-CN, zh-TW), matching
en-US/ru-RU key-for-key (26 new keys, verified by count in every file).
Not run anywhere: npm run typecheck / build. This machine has neither
Node nor npm, so nothing here has compiled — reviewed by hand plus
brace/paren balance checks and cross-referencing the generated Zod/TS
types. Treat this as needing a real typecheck before shipping.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* docs(install): note that AmneziaWG kernel module install is still manual
Tracked separately (not yet ported into this script) — see
coinman-dev/3ax-ui's install_amneziawg for the reference approach
(ppa:amnezia/ppa). Also serves as a real, path-filter-matching change
to get the previous empty commit's CI trigger to actually fire —
release.yml's push trigger is paths-scoped and an empty commit changes
no files, so it never matched.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): add a button to randomize obfuscation parameters
Mirrors the existing key-regenerate button next to the private key
field. Client-side randomization matches the ranges/constraints of
GenerateObfuscation20's "default" preset (internal/amneziawg/params.go)
closely enough for a form suggestion — the user can still hand-edit any
field afterward.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(install): auto-install the AmneziaWG DKMS module + amneziawg-tools
Ports install_amneziawg from coinman-dev/3ax-ui's install.sh, adapted to
this script's broader distro coverage and NONINTERACTIVE convention:
- Ubuntu/Debian/Armbian: ppa:amnezia/ppa (primary, tested path), with a
reachability pre-check for the Launchpad PPA host — often blocked by
hosting providers, especially Russian VPS — so a flaky network skips
the feature instead of hanging apt through several retries.
- Fedora/RHEL-family, Arch/Manjaro/Parch: best-effort fallback to plain
wireguard-tools (+ AUR amneziawg-dkms via yay/paru when available),
with a manual-install pointer.
- Everything else: manual-install pointer only.
Also installs ndppd and persists IPv4/IPv6 forwarding (for the future
IPv6/NDP phase, not yet wired into the panel) and adds a Secure Boot
warning at the end of the run, since a DKMS-built module is unsigned
and won't load while it's enabled — a common trap on cloud VPS images.
Never fatal: the panel installs and runs fine either way, an AmneziaWG
inbound just won't bring up its tunnel until the module is present.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): resolve all 3 real CI failures (typecheck/lint/codegen)
Found by checking the fork's Actions tab after the last two pushes —
the release build passed (it doesn't run these checks) but the
separate CI workflow caught three real issues:
- golangci-lint (noctx): every internal/amneziawg/manager.go exec.Command
call is now exec.CommandContext with a 30s timeout, so a hung
awg-quick/awg invocation can't block the reconcile job indefinitely
(mirrors internal/mtproto/process.go's own CommandContext usage).
- tsc --noEmit: frontend/src/schemas/client.ts's hand-maintained
InboundOptionSchema (used by the useClients hook, separate from the
auto-generated one in generated/) never got an awgServer field added
when the AmneziaWG frontend work was done — every read of
inbound.awgServer.* in amneziawgConfig.ts was typing as {}. Added
AwgServerOptionSchema, nested (not flattened like wg*) to match what
amneziawgConfig.ts already expects. Also guarded server.publicKey in
inbound-link.ts's genAmneziaWGLink against the schema's optional type.
- codegen staleness: frontend/public/openapi.json is produced by a Node
script (gen:api) this machine can't run; hand-applied the exact diff
the CI failure log already showed (amneziawg protocol enum entry,
ServerSettings schema, InboundOption.awgServer, one example payload),
verified as valid JSON.
Also confirmed independently by this run: install_amneziawg (previous
commit) installed and loaded the DKMS module successfully on both amd64
and arm64 CI runners. The two "Deploy Smoke Tests" failures are
unrelated to this change — this fork has only ever published the
dev-latest pre-release, and GitHub's /releases/latest API deliberately
excludes pre-releases, so the smoke test's no-argument install path
(which resolves "latest") has nothing to find. Not a regression; needs
an actual tagged release whenever that's wanted.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): Phase 2a — IPv6 support + NDP proxy
Adds native dual-stack IPv6 to AmneziaWG inbounds, ported from
coinman-dev/3ax-ui's approach:
- ServerSettings gets ipv6Enabled/ipv6Subnet/ipv6ExternalInterface;
Instance carries the server's own IPv6 address (first host of the
subnet) alongside its IPv4 one.
- defaultAmneziaWGClients allocates an IPv6 host address per client
(second AllowedIPs entry) when the server has IPv6 enabled, reusing
allocateWireguardAddress — which needed a real fix along the way: it
always suffixed "/32" regardless of address family, which is wrong
for an IPv6 host address (needs /128). Now family-aware.
- generateServerConfig's PostUp/PostDown gains IPv6 forward-accept
rules, proxy_ndp sysctl, and one `ip -6 neigh add/del proxy` entry per
enabled peer with an IPv6 address — the lightweight per-client
method, not the ndppd-daemon whole-subnet method (not worth the
config-file-management complexity at this scale; ndppd itself is
still installed by install.sh in case that changes later).
- ValidateIPv6Subnet rejects a malformed subnet before save.
- Frontend: ipv6Enabled/ipv6Subnet/ipv6ExternalInterface fields on the
AmneziaWG inbound form, EN+RU translations, openapi.json/generated/*
regenerated (the latter via `go run ./tools/openapigen`, pure Go).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): fill in IPv6 fields missed by the Phase 2a commit
Two real gaps the CI caught (both new fields, both my miss):
- inbound-defaults.ts's createDefaultAmneziawgInboundSettings() built a
server object literal predating ipv6Enabled/ipv6Subnet/
ipv6ExternalInterface — AmneziawgServer's inferred type now requires
them (zod .default() fields are non-optional post-parse), so this
didn't typecheck at all.
- openapi.json's ipv6Enabled property was missing the description the
real generator attaches (the Go doc comment covering all three IPv6
fields is attached to the first one) — a one-line diff, but git
diff --exit-code doesn't care how small.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): Phase 2b — per-client port-forwarding
Admins can now set a per-client ForwardedPorts string (e.g. "80, 443,
8000-8100") that gets DNAT'd + FORWARD'd to that peer's tunnel address
via iptables rules in PostUp/PostDown, ported and simplified from
coinman-dev/3ax-ui's shared/portfwd.
Two decisions worth flagging for future readers:
- The iptables --comment tag on each rule is awg-fwd-<fnv32a(email)>,
not the raw client email. Email is admin/API-supplied free text that
ends up embedded in a shell-executed PostUp/PostDown line; a hash
can never carry a shell metacharacter through where raw
interpolation could.
- The reconcile manager gained a third fingerprint (portFwdFP, next to
the existing structural/peers ones). `awg syncconf` only touches the
WireGuard peer table — it never re-applies PostUp/PostDown iptables
rules — so a port-forward-only change has to force a full
awg-quick down+up bounce, same as a structural change, rather than
the lighter sync a plain peer add/remove can use.
Also fixes a real pre-existing bug found while wiring up IPv6 client
allocation in the previous commit's spirit: allocateWireguardAddress
always suffixed "/32" regardless of address family, which produced
invalid host bits for IPv6 (needs "/128").
ForwardedPorts flows through model.Client -> model.ClientRecord
(gorm column wg_forwarded_ports, auto-migrated) -> ToRecord/ToClient/
MergeClientRecord, mirroring the awgServer field's earlier lesson
that new fields need checking against a second, hand-maintained
persistence-layer struct.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): route a client's traffic through Xray via the Routing page
Every enabled AmneziaWG inbound gets its own Xray TPROXY bridge
automatically, with no toggle to enable first: a loopback
dokodemo-door inbound (sockopt.tproxy) tagged with the AmneziaWG
inbound's own real tag, so it's already selectable in the existing
Routing page's inbound-tag picker — the same trick the mtproto
sidecar's own bridge already relies on (InboundService.GetInboundTags
is a plain, protocol-blind SELECT over every inbound row's tag, no
dedicated UI plumbing needed).
internal/amneziawg's defaultPostUpDown TPROXYs every peer's traffic
into that bridge unconditionally; the bridge's port is derived
deterministically from the inbound's id (EgressPortForInbound) so the
kernel-side reconcile loop and the Xray-config generator never need to
negotiate a runtime value between them.
injectAmneziawgEgress never generates a routing rule itself — whether
a client's traffic goes anywhere beyond Xray's default routing is
entirely up to whatever rules the admin adds through the existing
Routing UI (pick the AmneziaWG inbound's tag as source, optionally a
specific peer's IP via that page's own Source-IP field, and an
outbound), exactly the same workflow as routing any other protocol.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): recover orphaned interfaces after an ungraceful exit
Two gaps left an AmneziaWG interface stuck outside the manager's
control after a crash (kill -9/OOM/panic skips StopAll):
- ensureRestart's teardown was gated on the in-memory `exists` map,
which is always empty on a fresh process, so a survived interface
never got interfaceDown before interfaceUp tried `ip link add`
against a name the kernel already had — failing forever and never
populating m.ifaces, so traffic accounting silently stopped and the
inbound could never be removed. Gate on isInterfaceUp instead, which
checks real kernel state rather than this process's own bookkeeping.
- An inbound deleted from the database entirely while the panel was
down has no entry in `desired` ever again, so it never reaches the
per-id cleanup loop in Reconcile (which only walks m.ifaces). Add a
one-time sweepOrphansLocked scan of configDir, mirroring
mtproto.Manager.sweepOrphansLocked, that tears down and removes any
leftover interface/config not in the current desired set.
Found by the automated review on MHSanaei/3x-ui#6105 (Finding 1).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* i18n(amneziawg): backfill IPv6/obfuscation/port-forwarding keys in 11 locales
Only en-US/ru-RU ever got these 9 keys as each AmneziaWG feature landed
(the regenerate-obfuscation button, then Phase 2a's IPv6 fields, then
Phase 2b's per-client ForwardedPorts) — the other 11 locale files were
never backfilled, so i18next has been silently falling back to English
for all of them since Phase 1. Cosmetic-only (never broke anything),
but now closed for every shipped locale.
* fix(amneziawg): resolve 7 Medium findings from the automated PR review
Each is independently reproducible; fixed together since one review pass
found all of them.
- manager.go: the shared "ip rule add fwmark" policy route had no
existence check, so it duplicated in "ip rule show" on every interface
bounce (which hostRulesFingerprint forces on any client add/remove/
re-IP). Now checked via "ip rule list | grep -q ..." first. (Finding 2)
- params.go: ExternalInterface, IPv6ExternalInterface, and subnetIp/
subnetCidr are interpolated unescaped into a shell-executed PostUp/
PostDown line, but only obfuscation and the IPv6 subnet were validated
before save. Added ValidateInterfaceName (a strict charset+length
pattern) and ValidateSubnetIPv4 (netip.ParsePrefix), wired into
normalizeAmneziaWGSettings. (Finding 3)
- amneziawg_job.go: IsAwgInstalled() existed but nothing ever called it,
so a host without awg/awg-quick (the Docker image, RHEL, Arch, a failed
install.sh PPA step) logged a reconcile failure every 10s forever. Now
checked once an inbound actually needs it, warning once instead of
spamming. (Finding 4)
- client_inbound_apply.go: the WireGuard/AmneziaWG credential
carry-forward (added so a metadata-only client edit doesn't rotate
keys) never covered ForwardedPorts, so a partial edit -- an API call or
Telegram-bot toggle that omits the field -- silently wiped a client's
port-forwarding spec. Carried forward and written back the same way the
key fields already are. (Finding 5)
- manager.go: hostRulesFingerprint keyed each peer on its IPv4 address
only, and structuralFingerprint omitted IPv6Enabled/IPv6ExternalInterface
entirely, so an IPv6-only change could pick the syncconf reload path
(which never re-runs PostUp, leaving a stale NDP-proxy entry) or be a
complete no-op. Both fingerprints now cover the IPv6 fields. (Finding 6)
- port_conflict.go: the AmneziaWG egress bridge (injectAmneziawgEgress)
binds 127.0.0.1:63100+id with no collision check anywhere, since it
isn't a database row the ordinary port-conflict query can see -- same
blind spot the reserved Xray API port already has its own check for.
Added the equivalent check for the AmneziaWG bridge port. (Finding 7)
- install.sh: install_amneziawg ran unconditionally for every install/
update, building a DKMS kernel module and enabling host-wide IPv4/IPv6
forwarding whether or not the feature is ever used. Gated behind a new
should_install_amneziawg (XUI_INSTALL_AMNEZIAWG=true/false, or an
interactive y/N prompt defaulting to no). Also replaced the deprecated
apt-key adv with a dedicated keyring + signed-by= on the Debian branch,
and guarded its sources.list appends against duplication on a retried
install. (Finding 8)
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(amneziawg): make the Xray TPROXY bridge a per-inbound opt-in
Addresses Finding 10 from the automated PR review: an always-on TPROXY
bridge makes every AmneziaWG tunnel hard-depend on Xray being up (all
traffic, including DNS, drops whenever Xray restarts), and forces a full
awg-quick down+up bounce on any client add/remove/re-IP, permanently
losing the syncconf fast path.
Adds ServerSettings.RouteThroughXray (off by default):
- defaultPostUpDown only emits the TPROXY/policy-route rules when it's
on; a plain AmneziaWG tunnel now has zero Xray dependency out of the
box.
- structuralFingerprint covers it (toggling it changes whether PostUp/
PostDown contain any TPROXY rules at all -- structural, not a
per-peer host-rule). hostRulesFingerprint's IPv4 tracking is now
itself conditional on RouteThroughXray (and IPv6 tracking on
IPv6Enabled), so an instance that never uses either keeps the
syncconf fast path for a plain peer re-IP.
- injectAmneziawgEgress only creates a bridge for inbounds that opted
in; checkAmneziawgEgressConflict (the Finding-7 fix) now parses each
candidate through InstanceFromInbound so a non-routed inbound's port
is correctly never treated as reserved.
- New inbound-level Switch in the AmneziaWG form; the actual outbound
decision is still made entirely through the panel's stock Routing
page, same as before -- only whether the bridge exists at all is now
a choice.
Translation keys added to all 13 locales in the same commit this time,
not backfilled later (see Finding 9's lesson).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): resolve 4 Low findings from the automated PR review
- manager.go: serverAddress assumed subnetIp always ends in ".0"; a
base like "10.8.1.5" was used verbatim as the server's own address,
eventually colliding with peer allocation (which starts at .2
upward). Now derives the first host of the actual subnetIp/subnetCidr
network via netip, matching serverAddressV6's own approach. A /32
base (no host bits at all) is still used as-is. (Finding 12, partial
-- the /16 pool-widening half of this finding only exists on the
upstream-pr/amneziawg branch's merged client_wireguard.go, not here;
handled separately on that branch.)
- manager.go: ensureLocked carried the previous per-peer traffic
counters (`last`) forward even through a full restart, but
awg-quick down+up resets the kernel's own counters to zero -- the
next CollectTraffic computed a large negative delta (clamped to 0),
silently discarding real traffic. Extracted the decision into
nextTrafficBaseline: only a reload (syncconf) preserves the
baseline. (Finding 13)
- portfwd.go: exported ForwardedPortsInclude; inbound_amneziawg.go's
new checkForwardedPortsConflict uses it to reject, at save time, a
client's forwardedPorts that would DNAT the panel's own port or
another enabled inbound's port to the tunnel client --
portForwardLines has no destination restriction, so this collision
was previously silent. Wired into both the single-client update path
and the add-client path (client_inbound_apply.go), plus
normalizeAmneziaWGSettings for the whole-inbound save path. (Finding 14)
- inbound.go: InboundOption.AwgServer sent the whole ServerSettings
struct including PrivateKey to GetInboundOptions callers -- a
shared, admin-wide dropdown-filling endpoint the frontend's own
AwgServerOptionSchema never reads that field from. Redacted it
before assigning. (Finding 11)
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): don't widen the peer address pool past AmneziaWG's own subnet
Completes Finding 12 from the automated PR review (the serverAddress half
of this finding was already fixed on main and cherry-picked here). This
half is specific to this branch: allocateWireguardAddress's /16
pool-widening fallback is an independent addition from upstream's own
main that this branch inherited during the cherry-pick rebase -- it
doesn't exist on the fork's own main at all, so this fix can't be
cherry-picked the normal way and is committed directly here.
Widening is safe for WireGuard's own Xray-native inbound (AllowedIPs
isn't tied to a strict kernel interface subnet), but AmneziaWG's kernel
interface Address is exactly the configured subnet -- an address
allocated from the containing /16 once the /24 fills up would be
silently unroutable. allocateWireguardAddress now takes an explicit
allowWidening bool: WireGuard's own caller passes true (unchanged
behavior), AmneziaWG's passes false (fails loudly on exhaustion instead).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* docs(docker): note that AmneziaWG doesn't work in this image
Investigated: the image is Alpine-based, and AmneziaWG's own packaging
(DKMS module + amneziawg-tools) doesn't target Alpine/musl at all --
unlike the Debian/Ubuntu/Fedora/Arch paths install.sh already handles,
there's no package to apk add even with full host network/capabilities.
The panel already degrades gracefully (IsAwgInstalled() logs one warning
instead of retrying forever), so no code change is needed -- just made
the reason explicit at the point where a user would reach for cap_add/
network_mode to try to work around it.
* fix(sub): include amneziawg inbounds in subscription links
getInboundsBySubId's SQL protocol allowlist never had 'amneziawg' added,
so every AmneziaWG client was silently excluded from all three
subscription formats (plain/individual links, JSON, Clash) and from the
Telegram bot's QR/individual-link buttons, which fetch through the same
path. genAmneziaWGLink itself was already fully implemented and already
wired into GetLink's dispatch switch -- it just never got a chance to
run. Same bug shape as the earlier TRACKED_PROTOCOLS frontend gap: a
hardcoded protocol list one entry short.
Found while investigating whether the Telegram bot needed AmneziaWG-
specific client-management code -- it doesn't (the bot itself is fully
protocol-agnostic), but this is the actual root cause of "can't share
an AmneziaWG client's config via the bot."
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(inbound): enforce node-eligibility server-side, not just in the UI
Investigated multi-node interaction with AmneziaWG: the master's own
reconcile (DesiredAmneziaWGInstances) and Xray config generation
(injectAmneziawgEgress, the GenXrayInboundConfig protocol skip) all
correctly filter on NodeID IS NULL, so a node-assigned AmneziaWG (or
MTProto) inbound would never be managed by the master. But nothing
stopped one from being created that way: NODE_ELIGIBLE_PROTOCOLS
(frontend/src/pages/inbounds/form/InboundFormModal.tsx) only hides the
node picker client-side -- a direct API call could set nodeId on an
AmneziaWG inbound, which every node then reconciles as an ordinary
local inbound (nodes run the identical binary, full cron suite
included), leaving it running unmanaged and untracked by the master's
own AmneziaWG bookkeeping.
Added isNodeEligibleProtocol (inbound_protocol.go), mirroring the
frontend's allowlist, and enforced it in both AddInbound (the actually
exploitable path -- nodeId comes straight from the request) and
UpdateInbound (defense in depth; NodeID is already restored from the
stored row there before this check, so it mainly guards against a
protocol change on an existing node-hosted inbound).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): allow TPROXY-marked traffic through a default-deny INPUT chain
TPROXY never rewrites a packet's own destination address, only the routing
decision. A default-deny firewall whose INPUT chain sanity-checks "is this
destination actually local" (UFW's ufw-not-local, via addrtype --dst-type
LOCAL, is a concrete example) silently drops the redirected packet before
Xray's socket ever sees it -- RouteThroughXray looked fully configured
(TPROXY rule present and counting, Xray listening with IP_TRANSPARENT set)
yet every peer's traffic vanished with no trace on either side.
Adds an idempotent, never-torn-down "iptables -I INPUT 1 -m mark --mark
<fwmark> -j ACCEPT" alongside the existing shared policy route, so this
works regardless of which firewall manager owns the rest of the INPUT chain.
* fix(frontend): give AmneziaWG the same UDP tag and its own tag color
The Inbounds list only special-cased isWireguard/isHysteria for the "UDP"
network badge, so an AmneziaWG row showed just the bare protocol tag with
no transport badge next to it. Added the missing isAmneziawg flag (mirrors
isWireguard exactly) and wired it into the same branch.
Client-row protocol-color maps in ClientsPage/HostList had no amneziawg
entry, silently falling back to grey -- ClientInfoModal already had
amneziawg: 'yellow' from earlier work, these two just never got it.
* feat(logs): show which AmneziaWG client an access-log line belongs to
The dokodemo-door TPROXY bridge every AmneziaWG peer's traffic is routed
through has no per-user identity, so Xray's own access log never carries an
"email:" token for these lines -- the Access Logs modal showed a blank
Email column for every in-*-udp row, even though every other protocol's
rows show the client normally.
The peer's decapsulated tunnel IP does survive as the log's "from" address,
and that IP deterministically maps to exactly one configured peer. Builds a
"<inbound tag>|<ip>" -> email index from the same AmneziaWG inbounds already
parsed elsewhere (amneziawg.InstanceFromInbound), and fills in Email from it
whenever the raw log line didn't have one.
* fix(amneziawg): enable sniffing on the TPROXY bridge
Domain-based Routing rules could never match RouteThroughXray traffic: an
AmneziaWG peer resolves DNS itself, through the tunnel, before ever sending
a packet, so the decapsulated traffic TPROXY hands to the bridge is already
a bare destination IP with no domain name attached at the network layer.
Every other inbound recovers this via sniffing (confirmed working for the
stock wireguard inbound, which does have it configured); the bridge never
got a sniffing block at all, so only tag/IP/network-based rules could ever
match it -- any domain rule above it in the list was silently unreachable.
* docs: add an AmneziaWG config page and list it as a supported protocol
Closes the PR checklist gap: the feature shipped with zero mention on
the docs site. Mirrors reality.mdx's structure (key settings, setup
steps, config excerpt) and notes the Docker/multi-node/Telegram-bot
caveats the PR itself is honest about not having confirmed.
* fix: address the fresh review round on PR #6105 (8 findings)
1. hostRulesFingerprint didn't account for ForwardedPorts when
RouteThroughXray was off, so re-IPing a peer with port-forwarding
configured left stale DNAT rules pointing at an address the next
peer could be handed.
2. Server/client config values (keys, email, I1) were never validated
for control characters before being written into the generated
.conf; a newline could smuggle a PostUp hook into awg-quick's
parser. Added ValidateConfigValue at save time and a
sanitizeConfigValue backstop at render time.
3. checkForwardedPortsConflict didn't scope to node_id IS NULL, so a
port used only on a different node produced a false collision; also
hoisted the panel-port/inbounds lookup out of the per-client loop
(portConflictContext) so N clients cost one query, not N.
4. PostDown commands were ";"-joined and abort on the first failure;
appendOrTrue makes teardown best-effort so an external firewall
flush can't leave DNAT rules to accumulate across bounces.
5. The "ip rule list | grep -q" existence check could SIGPIPE under
pipefail and re-add a duplicate rule; switched to grep -c >/dev/null.
6. Ported the vpn:// share-link format (base64url of the plain .conf
text, matching the real AmneziaVPN app) onto this branch -- it had
only ever landed on our own fork's main, so this PR branch was still
on the old amneziawg://+query-params scheme our own docs no longer
described. Also corrected the docs' install.sh claim (opt-in/
interactive, not automatic) and stale pre-opt-in comments in
route_egress.go.
7. install.sh: Arch's ndppd install used pacman -Syu (full system
upgrade) instead of -Sy like every other call in the script; and
should_install_amneziawg re-prompted on every `x-ui update` even
when awg was already installed.
8. CollectTraffic could clobber a concurrent restart's freshly-reset
(empty) traffic baseline with stale pre-restart counters, since
getPeerStats runs lock-free; now checks pointer identity before
writing back. sweepOrphansLocked permanently disabled itself on a
transient os.ReadDir failure instead of allowing a retry.
go build/vet/test and frontend typecheck/lint/build/vitest all pass.
* fix(install.sh): check the live sysctl value, not sysctl.conf text
Reviewer feedback (cherts, PR #6105): grepping /etc/sysctl.conf for the
setting name is unreliable -- many distros split sysctl config across
/etc/sysctl.d/*.conf, and /etc/sysctl.conf can be a symlink into that
directory, so the check can miss an already-active setting (harmless
duplicate append) or match a disabled/commented line (forwarding
silently stays off). Query the live value via `sysctl -n` instead,
which is accurate regardless of which file set it. Applied the same
fix to both the IPv6 and IPv4 checks for consistency.
* fix: update inbound_amneziawg.go to the split buildInboundForLocalRuntime
Same fork-only-file blind spot as the one caught on our own main after
the 3.6.0 sync: upstream split buildRuntimeInboundForAPI into
buildInboundForNodePush / buildInboundForLocalRuntime (part of the
node-sync client-deletion fix, 5bc81dfd), updating every call site it
could see. This file doesn't exist upstream, so it kept calling the
old name even after the branch merged in that commit.
* fix(frontend): recognize AmneziaWG's vpn:// scheme in share-link labels
The shared link-tag/label helper (used by the client info modal, QR
modal, and subscription page) had no entry for the vpn:// scheme
AmneziaWG links use, so it fell through to the generic fallback: a
plain "Vpn" tag with no color, and an empty remark/port that made the
row's title fall back to "Link N" instead of the inbound's actual
name:port — unlike every other protocol, which shows its real tag and
label.
vpn:// links are base64url of a plain .conf text (matching the real
AmneziaVPN app's own share-link format), not a structured URL, so
there's no query string or #hash to read a remark/port from. Decode
the payload and pull the remark/endpoint back out of the .conf text
directly instead.
* fix(xray): force a full restart for TPROXY inbounds, never hot-add them
Real incident: an AmneziaWG inbound with RouteThroughXray enabled lost
all internet on that connection after a migration. Root-caused on the
live box -- iptables TPROXY counters were incrementing (packets
correctly redirected to 127.0.0.1:63110), but nothing was actually
listening there (ss showed nothing on that port) until a full
`systemctl restart x-ui`, after which the bridge came up immediately.
Xray-core's gRPC AddInbound reports success for a new sockopt.tproxy
inbound (internal/amneziawg's own Xray egress bridge is the only kind
this fork ever generates) but doesn't reliably bind a working listener
for it outside of process startup -- the bridge silently never comes
up, and RouteThroughXray traffic goes nowhere until the next full
restart happens to occur for an unrelated reason.
diffInbounds already has this exact defensive pattern for REALITY
inbounds ("a gRPC remove+add does not reliably rebuild the REALITY
authenticator"), just never extended to TPROXY, and only in the
already-existing-then-changed branch -- the "brand new inbound" branch
had no such guard at all, which is exactly the path a freshly-enabled
RouteThroughXray bridge takes. Added inboundUsesTproxy and wired it
into both branches.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): flag Xray for resync when a peer edit changes qualifying state
Real production bug, root-caused on iiadmin-vps: updateAmneziaWGInbound/
AddInbound/DelInbound only ever updated the kernel interface via
amneziawg.GetManager() -- they never called SetNeedRestart the way every
other protocol's mutation path does (client_crud.go, inbound.go, etc. all
do). injectAmneziawgEgress's TPROXY bridge inbound depends on
InstanceFromInbound finding at least one qualifying peer plus
RouteThroughXray, so an edit that flips that (first peer added, last one
removed, RouteThroughXray toggled on) previously required a full panel
restart before the bridge actually got created, with no error anywhere:
the kernel interface would handshake fine, but traffic redirected into the
bridge's TPROXY port went nowhere because nothing was listening there.
diffInbounds/inboundUsesTproxy already correctly force a full restart for
a brand new TPROXY inbound (bdee0a20) -- that part was never the bug. The
gap was entirely upstream: nothing ever told Xray a resync was even needed.
* fix(clients): reject AllowedIPs already used on another WireGuard/AmneziaWG inbound
defaultWireguardClients/defaultAmneziaWGClients only ever checked uniqueness
against their own inbound's client list, so two inbounds sharing a subnet
(same protocol or not) could silently hand out or accept the same address --
the exact scenario behind a real duplicate-IP incident where a WireGuard and
an AmneziaWG client both ended up on the same address. otherTunnelAllowedIPs
now collects every address already claimed on every other tunnel inbound and
folds it into both the auto-allocation pool and the manual-entry collision
check, naming the other inbound in the error when it fires.
* fix(frontend): add the missing AmneziaWG config download on the sub page
The subscription page already gave WireGuard links their own "Config"
block (copy/download/QR of the actual .conf, via wireguardConfigFromLink
reversing the wireguard:// query params) but had no equivalent for
AmneziaWG's vpn:// links -- its isWireguardLink gate never matched them,
and no reverse-parse helper existed for this page specifically. Every
other surface (InboundInfoModal, ClientInfoModal, ClientQrModal) already
had this parity; this was the one page that didn't.
Fixed by adding amneziawgConfigFromLink (inbound-link.ts), simpler than
its WireGuard counterpart since a vpn:// payload already *is* the plain
.conf text -- just base64url-decode it, no query-param reconstruction
needed -- and wiring it into SubPage.tsx alongside the existing WireGuard
block, reusing the same pages.clients.amneziaWgConfig label the other
three surfaces already use.
* fix(xray): force a full restart for password-auth SOCKS5 hot-apply
Real production incident: editing a client under an AmneziaWG inbound
left its embedded SOCKS5 relay's settings byte-different (a new account
list), and Xray's gRPC remove+add hot swap silently dropped the account
for a peer whose email contained non-ASCII characters -- its tunnel kept
handshaking fine but all its traffic got rejected at the SOCKS5 layer,
while every other peer on the same relay was unaffected. A full restart
(reading the same JSON straight from disk) always produced the correct
account list. socks isn't in userDiffableProtocols (that only covers
vless/vmess/trojan's clients+email shape, not accounts+user), so any
settings drift on this inbound fell through to the generic remove+add
path. Forces a restart instead, the same defensive choice already made
for REALITY and TPROXY -- scoped to auth:"password" specifically so the
other, noauth SOCKS5 bridges (panel/node/mtproto egress) keep the cheaper
hot path.
* Fix Attach reusing one identity's address across wg/awg inbounds
ClientService.Attach deliberately copies one identity's stored
AllowedIPs into every WireGuard/AmneziaWG inbound it's attached to
in the same call, so the same person gets the same tunnel address
on every protocol they use. Its loop calls addInboundClient once per
inbound, and each of those independently computes
otherTunnelAllowedIPs -- so by the second inbound in the batch, the
first inbound's just-written copy of this identity's own address
looked like a cross-inbound collision against itself.
Real production symptom this caused: detaching then re-attaching a
client to both wg and awg failed with "wireguard: allowedIPs entry
X is already used by a client on inbound 'awg' (#N)" -- the exact
address the identity is supposed to keep, rejected as if it belonged
to someone else.
Add a selfEmails exclusion to otherTunnelAllowedIPs and populate it
from the client(s) being processed at the one real call site. Safe
unconditionally: ClientRecord.Email is globally unique, so a match
can only ever be this same identity's own entry on a sibling inbound,
never a genuine different client's address.
Reproduced the underlying mechanism live (manual entry correctly
rejected as a cross-inbound collision; fresh auto-allocation
correctly avoided a used address) before writing the fix, to confirm
the guard itself works and the bug is specifically in how Attach's
per-inbound calls interact with it.
* Attach: allocate fresh when re-attaching with no active tunnel
The previous fix (82cc69f5) made Attach's own address-reuse
correctly not collide with itself across inbounds -- but it still
always reused an identity's stored AllowedIPs verbatim, even when
that identity currently has zero WireGuard/AmneziaWG attachments at
all. A real report from testing this live: an identity fully
detached from both its wg and awg inbounds, then re-attached, got
its old address back even though several lower addresses were free
-- because nothing about being fully detached ever cleared the
stored value Attach copies from.
Add hasTunnelAttachment, checked once against the identity's CURRENT
inbound set before Attach's loop runs: if none of its current
inbounds is WireGuard/AmneziaWG, clear the stored AllowedIPs so this
attach allocates fresh (matching what a brand-new client would get)
instead of resurrecting an address nothing reserves anymore. Left
alone when the identity already has an active tunnel elsewhere, so
extending it to a second protocol still keeps a consistent address.
* Fix TestOtherTunnelAllowedIPsExcludesSelfEmail's own test setup
CI caught this: the "genuinely different client" (other@wg) was
seeded onto the SAME inbound passed as excludeID, which
otherTunnelAllowedIPs already excludes entirely regardless of the
selfEmails fix -- so the assertion that its address is still
reported could never have passed, proving nothing either way. Move
it onto the sibling inbound alongside shared@id, which is what the
test actually needs to exercise (two clients on one sibling, one
excluded by email, one not).
* Attach: never inherit an address that doesn't fit the target inbound
hasTunnelAttachment (from the earlier fix, commit 51067f16) only
asked "does this identity have ANY tunnel attachment", treating that
as license to reuse its stored address verbatim on every inbound
being attached. Real production case this missed: an identity's
stored address came from WireGuard's own fallback subnet
(10.0.0.0/24, used when that inbound has no other clients to infer a
base from), then got attached to a second, AmneziaWG inbound
configured for a completely different subnet (10.8.1.0/24).
defaultAmneziaWGClients's already-set-AllowedIPs branch only checks
for collisions, never subnet membership, so the mismatched address
was accepted silently -- producing a peer that can never actually
connect, since an AmneziaWG address must fall inside the kernel
interface's own configured subnet to be routable at all.
Add addressesFitAmneziaWGInbound, checked per inbound inside Attach's
loop: if the inherited address doesn't fit the SPECIFIC inbound being
attached, clear it just for that one so it gets a fresh, valid
allocation instead, while other already-attached inbounds keep their
existing values. WireGuard has no equivalent strict subnet
requirement (allocateWireguardAddress can widen to a fallback pool
for it), so this only ever constrains AmneziaWG targets.
* Give WireGuard an explicit, admin-configurable subnet field
WireGuard previously had no configurable subnet at all -- only an
implicit one, either inferred from existing clients' own addresses
(wireguardAllocationBase) or a hardcoded 10.0.0.0/24 fallback when
none exist yet. AmneziaWG, by contrast, has always had a real
server.subnetIp/subnetCidr field in its settings, editable in the
UI. User request: give WireGuard the same treatment.
Backend: explicitWireguardSubnetBase reads an optional subnetIp/
subnetCidr pair from the inbound's own settings JSON (mirroring
AmneziaWG's defaultAmneziaWGSubnetBases). defaultWireguardClients
checks it first; only when unset does it fall back to today's
inference-from-existing-clients behavior, so an inbound saved before
this field existed keeps working exactly as it always has.
Frontend: subnetIp/subnetCidr added to WireguardInboundSettingsSchema
and the inbound form (mirroring AmneziaWG's own field layout/labels),
with a real default (10.0.0.0/24, the same value the backend already
fell back to) seeded for newly created inbounds so the field starts
populated and editable rather than blank. Translated across all 13
locales.
This also structurally closes the class of bug fixed in
82cc69f5/291c47b3: with wg and awg subnets explicit and
independently controllable, an admin who wants matching addresses
across both protocols can configure them to actually agree, instead
of one silently inheriting the other's incompatible range.
* Split the client edit form's AllowedIPs into per-protocol fields
A client attached to both WireGuard and AmneziaWG shared one AllowedIPs
form field with a dynamically-switching label, so its two genuinely
different addresses could never both be shown or edited correctly.
Worse, Update/Create broadcast that one shared value to every attached
wg/awg inbound with no subnet-fit check, so an ordinary edit save could
silently overwrite one protocol's address with the other's -- the same
bug class already fixed for Attach, but reachable from any client edit.
model.Client gains an optional AllowedIPsByInbound map so a caller can
send distinct values per inbound; Update/Create honor it and, when it's
absent, clear a shared value that doesn't fit an AmneziaWG inbound's own
subnet instead of writing it through. A new TunnelAllowedIPsByInbound
read path feeds the real per-inbound address to the client edit form via
GET, which now renders two separate, correctly-labeled fields whenever
both protocols are attached (unchanged single dynamic field otherwise).
* Regenerate openapi.json for the new allowedIPsByInbound field
Follow-up to 878ee839: gen:zod (frontend/src/generated) was already
regenerated and committed, but gen:api (frontend/public/openapi.json)
wasn't, so CI's codegen drift check failed.
* Fix build breakage from merging upstream main: Update() gained a limitHwid param
Two of our own AllowedIPs tests (not present upstream, so the merge never
flagged them as conflicting) still called the old 3-arg Update(inboundSvc,
id, client) -- upstream's hardware-ID-limit feature added a required
limitHwid parameter that every other caller in this package already
passes. Also drop createDefaultInboundSettings from InboundsPage.tsx: the
merge conflict resolution kept the import, but upstream's clone-payload
refactor (buildClonePayload, inbound-clone.ts) already calls it
internally now -- this file doesn't need it directly anymore.
* Fix real bug: AmneziaWG clients rejected as "empty client ID" in 3 places
Three switch statements on inbound.Protocol handle "wireguard" explicitly
(checking client.PublicKey) but fall through to the default case for
"amneziawg" (checking client.ID, which AmneziaWG clients never set --
they use PublicKey/Email like WireGuard, not the VMess/VLESS UUID field).
This is what the 4 AllowedIPs tests were actually catching:
UpdateInboundClient's newClientId derivation hit this same default branch,
so every Update() on an AmneziaWG client returned "empty client ID"
before ever reaching the AllowedIPs logic being tested.
Fixed by adding "amneziawg" alongside "wireguard" in each switch:
addInboundClient's per-client validation, UpdateInboundClient's
newClientId derivation, and AddInbound's per-client validation (the
third one wasn't hit by these tests, but has the identical bug -- creating
a brand-new AmneziaWG inbound with a client attached would fail the
same way).
* refactor(amneziawg): rename Obfuscation20 to Obfuscation31, drop the dead mobile preset
Mechanical rename ahead of the AmneziaWG 3.1 parameter work: the type,
generator and prose all said 2.0, and the "mobile" generator preset was
reachable only from its own test. No behavior change.
* feat(amneziawg): AmneziaWG 3.1 obfuscation parameters (backend + generated schemas)
Adds the 3.1 parameter surface to the inbound settings and both Go config
emitters: I2-I5 signature packets, HeaderProtectionKey (base64 32-byte,
shared server<->client), ContentPaddingAddition, the five handshake-timing
randomization ranges (RekeyAfterTime/RekeyTimeout/RejectAfterTime/
KeepaliveTimeout/MaxHandshakeAttempts), and the RandomTrailers/
DisableCookies switches. Freshly generated sets fill everything except
I2-I5 (matching Amnezia's own generator) with jittered ranges bracketing
WireGuard's stock timing constants; every reject window starts >= 30s
above the rekey window by construction. Empty fields stay off the wire,
so blanking a field disables just that feature.
Validation generalizes the H1-H4 range checker for the new uint32-range
fields, requires min 1 on timers, cross-checks rekey-vs-reject, and
demands a real 32-byte base64 header-protection key. The manager warns
once per process when the installed awg tools predate 3.1 but an inbound
uses 3.1 parameters (awg-quick rejects unknown keys with a generic
error otherwise); apply still proceeds.
Requires amneziawg-tools v3.1.20260812+ / module or amneziawg-go
v3.1.20260814+ on the host.
* feat(amneziawg): emit and randomize 3.1 parameters in the frontend
Both client-config emitters (the vpn:// link builder and the clients-page
.conf builder) now carry the 3.1 [Interface] lines in the same order as
the Go emitters. The obfuscation randomizer moves out of InboundFormModal
into a shared lib/xray/amneziawg-obfuscation.ts that also fills the new
fields, and createDefaultAmneziawgInboundSettings switches from static
values to that generator — a fresh inbound now really gets the unique
fingerprint the docs promise instead of the same jc=5/jmin=10 set on
every install.
Schema parse-time defaults for the new fields stay ''/false on purpose:
real values come only from the generator, so resaving an inbound never
mutates its stored parameters. A new parity test pins the hand-written
AmneziawgServerSchema to the generated ServerSettings key set, so a field
added on one side can no longer silently vanish from configs.
* feat(amneziawg): 3.1 form fields and translations
Inbound form gains inputs for I2-I5, HeaderProtectionKey (filled by the
existing obfuscation Regenerate button), ContentPaddingAddition, the five
timing ranges, and the RandomTrailers/DisableCookies switches; the MTU
input picks up the min=1 its schema already enforced. All 13 locales get
the 19 new keys and drop the "2.0" branding from the s3/s4/i1 labels.
* docs(amneziawg): document 3.1 parameters; install.sh kernel/version notes
The AmneziaWG page's obfuscation section moves from the 2.0 to the 3.1
parameter set: table rows for I2-I5, HeaderProtectionKey,
ContentPaddingAddition, the timing-randomization ranges and the
RandomTrailers/DisableCookies switches, a requirements callout (tools
v3.1.20260812+, module/awg-go v3.1.20260814+, Linux 6.7+ for the DKMS
path), and a sample client .conf that matches what the panel actually
emits (including the DNS defaults and PersistentKeepalive it always had).
install.sh warns before a DKMS build on a pre-6.7 kernel and after any
install that left pre-3.1 amneziawg-tools on PATH.
Also updates the hosts API operation paths ({id} -> {groupId}) in the
stale ru/zh/fa reference pages: syncing docs/public/openapi.json for the
new AmneziaWG schema fields surfaced that rename, which had never been
copied over, and the docs build fails on paths missing from the spec.
* fix(amneziawg): reject control characters and canonicalize 3.1 range values
Adversarial review of the 3.1 work surfaced a validation gap:
base64.DecodeString silently ignores CR/LF, so a header-protection key
that picked up a line wrap in transit decoded to a valid 32 bytes,
passed validation, and was emitted verbatim into every client config —
where the orphan second line breaks the import while the server (whose
emitter strips control chars) keeps running with the correct key. The
key and range validators now reject control characters outright.
Also from the same review: range values are canonicalized on save
("110 - 140" -> "110-140", whitespace-only collapses to feature-off,
closing a case where the server conf rendered an invalid blank-value
line the client emitters omitted); the rekey/reject invariant is now
enforced against WireGuard's 120s/180s defaults when only one side is
set; and the structural fingerprint joins on "\n" instead of "|",
which is a legal I1-I5 character and made adjacent free-text fields
join-ambiguous.
* fix(install): resolve latest release tag via web redirect to dodge API rate limits
The non-interactive install smoke test resolved the release version through
the unauthenticated GitHub API (api.github.com/.../releases/latest), which
allows only 60 requests/hour per IP. The test installs twice in one run, and
on shared CI runner IPs the second call gets rate-limited, returns no
tag_name, and install.sh treats an empty version as fatal (exit 1) — the same
"Failed to fetch x-ui version" real users hit behind CGNAT/shared addresses.
resolve_latest_tag() now reads the tag from the github.com releases/latest
web redirect (not subject to the API rate limit), falling back to the API
only if the redirect yields nothing. Verified with the real
deploy/test/smoke-noninteractive.sh (two installs, both green).
* fix(amneziawg): three review findings on #6105, plus a comment trim
1. A peer's allowedIPs reached the generated .conf unvalidated and
unsanitized, unlike email/publicKey/preSharedKey which
normalizeAmneziaWGSettings already guards. A newline in an entry let a
following "[Interface]" re-open the interface section, whose "PostUp = ..."
awg-quick then runs as root on the next apply. Reproduced end to end
against generateServerConfig. The save path now rejects and canonicalizes
through normalizeWireguardAllowedIPs, and the render path sanitizes as a
backstop for rows predating the validation (an upgrade, a restored backup,
a direct DB edit). H1-H4 get the same render-time sanitize, and the two NIC
name fields a plausibility check, since stripping control characters alone
would still let a shell metacharacter into a root-executed PostUp line.
2. EgressPortForInbound is 63100 + inbound id, so an id past 2435 derives a
port above 65535 -- and Xray rejects the whole generated config over one
invalid port, taking every other protocol down with it. It now reports
ok=false past the range, and both the Xray bridge and its TPROXY rules are
skipped instead of emitting an impossible port.
3. The downloadable AmneziaWG .conf read ClientRecord.allowedIPs, a single
shared column that holds the WireGuard address for an identity attached to
both protocols -- the exact ambiguity tunnelAllowedIPs was added to resolve
for the edit form. The info and QR modals already hydrate that field, so
they now pass this inbound's own address to the builder.
Also trims the comment blocks in the files touched here to the 2-line
guidance in CLAUDE.md: internal/amneziawg alone carried 423 comment lines in
over-long blocks against 118 for the comparable internal/mtproto, and is now
at 110. Every non-obvious constraint is kept (the kernel S1/S2 rule, why
PostDown is best-effort, why grep -c and not -q, why the fingerprints split
three ways); the narration is gone. Two hot_diff.go comments pointed at an
internal/amneziawgnet package and an injectAmneziawgnetSocks function that
exist nowhere in the tree; the checks themselves are unchanged.
* feat(logs): add an AmneziaWG log view to the overview
The overview has an access-log view for Xray but nothing for AmneziaWG, so
when a tunnel misbehaves there is no way to see it from the panel at all. A
kernel tunnel logs no per-request lines, so the equivalent view is built from
the two things it does expose:
- Live per-peer activity from `awg show <iface> dump`, joined to the client
email through the desired peer set: last handshake, endpoint, allowed IPs,
cumulative transfer and online state, newest handshake first.
- The panel's own AmneziaWG event lines (interface up/down, awg-quick
failures, the pre-3.1 tools warning), which are what actually explain a peer
being absent from the table.
POST /panel/api/server/amneziawglogs/:count serves both, with the same
count + filter contract GetXrayLogs uses, and the modal mirrors XrayLogModal's
toolbar, auto-update, mobile cards and download. The action-bar button is
gated on a new status.amneziawg.configured, which stays true while an inbound
exists but its interface is down -- exactly when the event lines matter.
Verified against a running panel: the endpoint returns the peer table and
real event lines ("awg/awg-quick not found on PATH", "create config dir:
permission denied"), and count and filter both narrow as documented.
One of those lines surfaced a Debugf that had been rendering as
"for inbound1:amneziawg:"; fixed here since it is now user-visible.
* fix(amneziawg): stop double-counting a routed inbound's traffic
injectAmneziawgEgress tags its Xray bridge with the AmneziaWG inbound's own
tag, so the stock Routing page can target it. Xray therefore reports that
bridge's bytes under the inbound's tag, and XrayTrafficJob feeds them to
AddTraffic -- which accumulates -- on top of the same bytes AmneziaWGJob
already reported from `awg show dump`. An inbound with routeThroughXray on
counted roughly twice its real traffic, which also inflates the quota checks
that read the same counters.
The awg counters are the complete measure: every peer, whether or not TPROXY
routed it, and the same wire bytes the per-client totals are built from, so
they stay and the Xray rows are dropped. Per-client stats were never affected
-- a dokodemo-door bridge has no per-user identity, so Xray emits no
user>>>email rows for it.
Filtering happens before every consumer, so the DB totals, the external
traffic inform and the dashboard's live speed all read one source per inbound.
The set of bridge tags now comes from a predicate shared with
injectAmneziawgEgress itself, with a test that pins the two together -- naming
one tag too few doubles the traffic again, one too many makes real traffic
vanish.
* fix(amneziawg): align the three .conf emitters on one peer field order
The panel builds an AmneziaWG client .conf in three independent places, and
they disagreed: buildAmneziaWGClientConfig put PresharedKey right after
PublicKey (wg-quick(8)'s own order, and what both WireGuard emitters on the
clients side already use), while genAmneziaWGConfig and the Go
amneziaWGConfigText put it after Endpoint. A user comparing a subscription
link against a downloaded .conf sees the difference immediately, and the
generators are exactly the kind of parallel implementation CLAUDE.md warns
about drifting.
Moves the two outliers onto the wg-quick order. Also drops the stray trailing
newline that only appeared when PersistentKeepalive was set, so a config now
always ends on its last set field whichever that is -- the same shape all
three emitters produce for the same client.
Parsing is unaffected either way (the format is order-insensitive, and the
AmneziaVPN app reads it as a flat key-value bag), so this changes only the
rendered text. Adds a test on each side that pins the peer block's field
order, since nothing previously asserted it.
* refactor(amneziawg): switch to the embedded amneziawg-go/gVisor architecture
Replaces the kernel-module (DKMS) + awg-quick + TPROXY backend with the
fork's own embedded design: amneziawg-go runs in-process over a userspace
gVisor netstack, and each peer's decapsulated traffic relays into its own
loopback Xray SOCKS5 inbound, so Xray's native stats/sniffing/routing work
for free instead of through hand-rolled bridges. No kernel module, no DKMS,
no Secure Boot conflicts, works the same in a container as on bare metal.
- internal/amneziawgnet: new package (Device/UAPI, gVisor netstack, TCP/UDP
forwarding, SOCKS5 relay, peer identity, IPv6 host-alias egress identity,
per-client port-forwarding) - amneziawg-go v3.1.20260814 + gvisor.
- internal/amneziawg: keep the reusable protocol-shape types/validation
(Instance/Peer/Obfuscation, InstanceFromInbound); drop the OS-shellout
half (awg-quick, TPROXY policy routing, NDP proxy, peer-stats parsing).
- internal/web/service: rewire the 5 integration points (job, runtime,
client-apply, web shutdown, xray config) from the old manager to the new
one; the AmneziaWG log view is rebuilt on the embedded Device's own UAPI
dump (extended to carry endpoint/AllowedIPs) instead of `awg show dump`.
- install.sh: drop DKMS/ndppd/TPROXY/Secure-Boot installer code (~250
lines) - an entire recurring class of installer fragility goes away.
- frontend: drop the now-meaningless routeThroughXray toggle (the relay is
always on); keep the field in the Zod schema, unexposed, so it isn't
silently stripped from stored settings on next save - two regression
tests deliberately depend on the Go struct still carrying it.
- docs/i18n: rewrite amneziawg.mdx for the new architecture; drop the
dead routeThroughXray translation keys across all 13 locales.
Real production throughput (embedded core datapath, isolated bench, same
box the kernel-module path was measured on): ~296 Mbit/s up, ~640 Mbit/s
down, vs. 414.69 MB/s (~3.3 Gbit/s) for the kernel module on the same
hardware - a real gap, tempered by this being single-stream/no-SOCKS5-hop
and most VPN traffic being latency-bound rather than throughput-saturating.
* fix(amneziawg): restore the branch's own Obfuscation31 shape + 2 CodeQL findings
The previous push's wholesale-copy of types.go/params.go from the fork's
main branch pulled in that branch's own independent (and incompatible)
naming for the same AWG 3.1 feature set: Obfuscation20/GenerateObfuscation20
instead of this branch's already-shipped Obfuscation31/GenerateObfuscation31,
and a missing CanonicalizeUintRange -- broke every Go CI job (the whole
matrix fails to compile when any one package doesn't, which is why govulncheck/
golangci/postgres-durable-first/race all failed identically, not just go-test).
Restores params.go/params_test.go verbatim from this branch's own last
commit (a strict superset of validation: it already cross-checks rekey vs.
reject timing windows, which the copied version never did) and folds the
3.0/3.1 fields (HeaderProtectionKey, ContentPaddingAddition, the 5 timing
fields, RandomTrailers/DisableCookies) into Obfuscation31 itself, matching
the original struct exactly instead of as separate top-level Instance
fields. instance.go, the two amneziawgnet call sites, and 7 amneziawgnet
test files updated to match. Also drops the one test (sanitizeConfigValue)
that only ever served the retired kernel-module .conf writer -- correctly
not ported, so the test testing it shouldn't have been copied either.
Also fixes 2 CodeQL findings the same push surfaced: a clamped uint64->int64
conversion for the new log view's live byte counters (server.go), and an
unneeded len+len sum feeding a slice pre-size in the v6-egress outbound
merge (xray.go) -- append already grows correctly without it.
* chore(amneziawg): regenerate frontend schemas for updated doc comments
npm run gen was missed after the previous commit's types.go doc-comment
edits (Obfuscation20 -> Obfuscation31, ValidateHeaderProtection ->
ValidateObfuscation in the prose) -- openapigen bakes those comments
into the generated schema's description field, so the committed
frontend/src/generated/schemas.ts and openapi.json still had the old
wording. codegen's git-diff-exit-code check caught it correctly.
* fix(amneziawg): narrow 2 test fixtures that collided with MaxForwardedPorts
TestCheckForwardedPortsConflict_CollidesWithEnabledInboundPort and
..._NoCollisionWhenPortsDontOverlap used "8000-8100"/"9000-9100" as their
ForwardedPorts fixture -- 101 ports each, one over MaxForwardedPorts (100).
The cap check (checkForwardedPortsConflict, added this session alongside
the SOCKS-phantom-port check) fires first, so both tests got "more than
100 forwarded ports" instead of ever reaching the collision logic they're
actually testing. The cap itself has its own dedicated boundary test
already; these two just needed a narrower range that still covers/misses
port 8080 as intended -- 8075-8085 and 9075-9085, 11 ports each.
* fix(amneziawg): checkAmneziawgnetSocksConflict had no receiver in its new home
My merge-conflict resolution kept this as a method call (s.checkAmneziawgnetSocksConflict)
inside checkPortConflictTx, a plain function with no *InboundService receiver --
upstream's #6225 fix moved the port-conflict check out of the (s *InboundService)
method and into this new tx-scoped free function, and I didn't notice the call
site needed to change shape too. CI caught it immediately (undefined: s); nothing
in this specific package can be locally verified past internal/database's own
unrelated, pre-existing CGO build issue on this dev machine.
Since the signature had to change either way, folded in the fix already flagged
as a separate follow-up: checkAmneziawgnetSocksConflict now takes the caller's
db handle instead of fetching its own via database.GetDB(), so it actually runs
inside the same serialized transaction #6225 introduced -- previously it sat
right next to that race fix without benefiting from it.
* fix: address the review findings on the embedded AmneziaWG PR
5 blocking findings:
- Floor S3/S4 at 12 in both obfuscation generators (Go and frontend) and
reject a hand-edited value below that when HeaderProtectionKey is set --
IpcSet requires it, and ~39% of previously-generated sets violated it
silently.
- Guard PrivateKey/PrimaryDNS/SecondaryDNS/remark against newline injection
in the AmneziaWG .conf builder (both the Go subscription-link path and
the frontend downloadable-config path) -- unguarded, any of them could
inject an arbitrary config line into a subscriber's client.
- Bound the derived AmneziaWG SOCKS relay port to <= 65535 once an
inbound's id is known, and check the reverse direction (does the relay
port collide with an existing inbound's port) on both create and update
-- previously only port -> relay collisions were checked, not relay ->
port.
- Gate injectAmneziawgV6Egress on the same V6AliasesActive predicate
desiredV6Aliases already uses, so the two can't disagree about whether a
peer's IPv6 identity is actually active at the OS level.
2 minor findings:
- Fix the forwarded-ports cap check's off-by-one (a spec covering exactly
the cap was rejected as if it were over it).
- Correct docker-compose.yml's stale comment describing the retired
DKMS/kernel-module architecture.
* chore: retrigger CI
build (armv5) failed on a transient Go module proxy network error
(INTERNAL_ERROR stream reset on sagernet/sing), unrelated to this PR's
changes.
* docs: fix doc comments still describing the retired DKMS/awg-quick design
A few doc comments (and one illustrative test log line) survived the
embedded-architecture cutover unchanged and now contradict the code
they sit next to:
- internal/amneziawg/types.go's package comment claimed this package
still owns a Manager that reconciles OS-level interfaces via
awg-quick/DKMS -- that Manager was removed; the reconcile loop lives
in internal/amneziawgnet now, and this package is protocol-shape-only.
- internal/amneziawg/params.go's ValidateObfuscation/ValidateConfigValue
comments cited "awg-quick up" / "awg-quick executes as root" as the
reason to validate -- the server itself never calls awg-quick in this
architecture; the same value still reaches a real rendered .conf that
a client app or an admin's own awg-quick CLI applies downstream, so
the validation is still warranted, just for a different consumer.
Mirrored the same fix in inbound_amneziawg.go's matching comment and
its test's comment.
- internal/amneziawgnet/manager.go's Manager doc comments (x3) pointed
readers at "internal/amneziawg.Manager" for comparison -- that type no
longer exists in this diff at all. Repointed at internal/mtproto.Manager,
the pattern this was actually modeled on and the one that's still real.
- Swapped one test's illustrative "awg-quick up awg2 failed" log line for
a message shaped like this architecture's actual amneziawgnet logging,
so a reader skimming the test doesn't wonder whether the server still
shells out to awg-quick.
No behavior change.
* fix(docs): re-run codegen for xray-settings.mdx after conflict merge
The automated conflict-resolution hand-merge for this generated file
was content-correct but didn't byte-match a real regen (different
YAML long-string folding style). Re-ran npm run gen + docs' gen:api
and kept that canonical output instead.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* fix(amneziawg): drop the dead access-log email backfill
amneziawgEmailIndex keyed peers by "<tag>|<tunnel IP>", a scheme built
for the retired TPROXY bridge where the peer's decapsulated tunnel
address survived as the access log's from-address. The embedded
architecture relays through a loopback SOCKS5 dial, so every AmneziaWG
log line's from-address is 127.0.0.1:<ephemeral> and the lookup could
never match: the index was rebuilt on every log view just to miss.
Remove the index, its GetXrayLogs wiring and its test. If per-line
emails are wanted back, the relay would have to publish a
local-port->email registry for the viewer to resolve loopback sources.
* fix(api): generate AmneziaWGLogs/PeerActivity schemas instead of hand-writing them
The amneziawglogs endpoint's response structs were missing from
openapigen's StructAllow, so they were silently absent from every
generated schema/example, the endpoints.ts entry carried a hand-written
response, and AmneziaWGLogModal.tsx duplicated the shapes as local
interfaces - the exact drift the allowlist rule exists to prevent.
Allowlist both structs with example tags, point the endpoint at the
generated schema, import the generated types in the modal, and sync
docs/public/openapi.json.
* chore(amneziawg): drop the unreferenced quiccapture package
Nothing imports internal/amneziawg/quiccapture and no route exposes it;
its package doc justifies the code as a port of
frontend/src/lib/xray/i1Generators.ts, which does not exist in this
repository, and promises an API round-trip that also does not exist.
1,110 lines of unreachable code with misleading provenance claims.
Revert this commit to bring the package back when the live-capture I1
feature and its frontend counterpart actually land.
* fix(clients): re-run cross-inbound conflict checks on the serialized writer
The new client-level checks - cross-inbound AllowedIPs collisions and
AmneziaWG forwardedPorts conflicts - read a fresh DB snapshot, decide,
and only then enter runSerializedTx, while lockInbound only serializes
writers on the SAME inbound. Two concurrent client creates on two
different tunnel inbounds both passed the read and both committed,
yielding two peers with one address: the exact check-then-claim race
81cfd857 (#6225) closed for AddInbound, which this PR's own
checkAmneziawgnetSocksReverseConflict already cites. Keep the pre-tx
pass for fail-fast UX and re-validate inside the transaction, where the
single writer makes the answer authoritative. The race test drives two
goroutines at two inbounds and demands exactly one winner; it fails
with committed=2 when the in-tx re-check is removed.
* fix(amneziawg): hot-apply depletion disables like mtproto does
applyTrafficMutationBatch special-cases MTProto so a quota/expiry
depletion cuts the sidecar immediately, but AmneziaWG fell through to
runtime AddUser/RemoveUser - explicit no-ops for this protocol - so a
depleted peer kept tunneling until the next 10s reconcile tick. Route
it through applyLocalAmneziaWG, whose own contract (re-read committed
settings, filter depleted clients, push to the interface) is exactly
this case; the comment claiming it mirrors applyLocalMtproto is now
true for the depletion path too.
* fix(amneziawg): persist cleared DNS fields instead of resurrecting defaults
PrimaryDNS/SecondaryDNS marshaled with omitempty, so clearing them
persisted settings with no key at all - and the frontend re-parses
stored settings through a Zod schema whose .default('8.8.8.8') /
.default('8.8.4.4') fire on missing keys, silently repopulating the
form on every load and re-persisting the defaults on the next save.
Blank is a documented, meaningful state (no DNS line in client
configs); drop omitempty so a cleared value survives the round-trip.
The regression test normalizes a server block with cleared DNS and
fails when the keys are dropped.
* fix(amneziawg): accept cleared numeric obfuscation/subnet fields in the form
AntD InputNumber emits null when cleared, Zod .default() only replaces
undefined, and unlike wireguard.ts - whose optionalClearedInt comment
documents exactly this failure mode - the AmneziaWG schema declared
subnetCidr and jc/jmin/jmax/s1-s4 as bare z.number() defaults. Clearing
any of the eight fields made safeParse reject the null and block the
save until the user retyped a value. Absorb null into undefined while
keeping each field's schema default, so a cleared field refills its
documented default and legacy blobs with absent keys behave as before.
* fix(amneziawg): guard the third .conf emitter against newline injection
The review-round fix added the newline guard to amneziaWGConfigText (Go)
and buildAmneziaWGClientConfig, but genAmneziaWGConfig in inbound-link.ts
- the third of the three emitters its own comment says must not drift -
still rendered privateKey/primaryDns/secondaryDns/remark unescaped, so a
newline there injected a config line (e.g. a rogue PostUp) into the
inbound form's downloaded .conf. Add the same guard, plus the regression
tests the original fix shipped without: all four fields on the Go and
both frontend emitters go red if any guard is removed.
* test(amneziawg): pin the S3/S4 floors the TS drift guard claims to mirror
The test's docstring says it mirrors internal/amneziawg/params_test.go,
but it asserted S3>=8/S4>=4 while the Go test and both generators pin
12/12 - the floor ValidateObfuscation enforces whenever a header
protection key is set, which this generator always sets. A regression
narrowing the TS floors into 8-11/4-11 would have passed the drift
guard and produced configs the backend rejects on save.
* docs: restore the pia repo-map entry and document the AmneziaWG subsystem
Merging main dropped CLAUDE.md's internal/pia/ bullet (added by #6272)
while resolving the repo-map conflict - the package itself is untouched.
Restore it, add the missing map entries for the two packages this branch
introduces (internal/amneziawg/, internal/amneziawgnet/), bump the cron
count, and give amneziawg_job its row in architecture.md's 5.4 table.
* chore(amneziawg): correct comments stranded by the architecture pivot
ae77c7e9's cutover to the embedded gVisor path deleted the kernel-module
code but left several comments describing it in the present tense:
hot_diff.go cited the removed service.amneziawgEgressStreamSettings and
wrongly claimed AmneziaWG is the only sockopt.tproxy source (tunnel's
TProxy mode is the live one the guard protects), socks_config.go pointed
at the deleted EgressBasePort/EgressPortForInbound, manager.go referred
to the deleted Manager and its fingerprinting as live code, web.go's
cron registration claimed the job scrapes traffic (its own doc says it
does not), and types.go capped ContentPaddingAddition at uint16 when
validation and upstream both use uint32.
* style(lint): satisfy gofumpt/goimports so make verify is green
json_service.go's two 'Tag: "proxy"}' literals came in with main's own
cc245a90 formatting commit and fail the repo's gofumpt gate for everyone;
the import grouping in inbound_amneziawg.go is from the serialized-writer
fix on this branch.
---------
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
Co-authored-by: claude[bot] <41898282+claude[bot]@users.noreply.github.com>
2026-08-23 17:41:15 -07:00
|
|
|
"client": rec,
|
|
|
|
|
"inboundIds": inboundIds,
|
|
|
|
|
"externalLinks": externalLinks,
|
|
|
|
|
"usedTraffic": usedTraffic,
|
|
|
|
|
"tunnelAllowedIPs": tunnelAllowedIPs,
|
feat(api): add GET endpoint to look up clients by Telegram ID (#5945)
* feat(api): add GET endpoint to look up clients by Telegram ID
GET /panel/api/clients/getByTgId/:tgId returns all clients matching the given Telegram user ID. tgId is not unique, so the response is an array of {client, inboundIds, externalLinks, usedTraffic} objects.
* fix: guard tgId=0 sentinel, index tg_id, deduplicate enrichment in getByTgId
Three issues from the code review on the new GET /panel/api/clients/getByTgId/:tgId
endpoint: the lookup did not short-circuit tgId <= 0 (this codebase's sentinel
for 'no Telegram ID'), had no index on clients.tg_id causing a full table scan
on every call, and duplicated the per-record enrichment (inbound IDs, external
links, effective flow, traffic) identically between get and getByTgId.
- Reject tgId <= 0 in GetRecordsByTgId with a clear error, matching the
'0 = none' convention used elsewhere in the codebase.
- Add index:idx_clients_tg_id to ClientRecord.TgID (struct tag + idempotent
startup migration for existing databases).
- Extract buildClientPayload helper used by both get and getByTgId.
- Update client_lookup_test.go to verify sentinel rejection instead of
expecting tgId=0 to be a valid lookup.
* refactor(api): move Telegram client lookup under /get/tgId/:tgId
Nest the Telegram-ID lookup beside the email lookup as /get/tgId/:tgId
instead of the flat /getByTgId/:tgId, so both client fetch routes share the
/get prefix. Gin resolves the static tgId segment ahead of the :email
wildcard, so /get/:email keeps matching plain email lookups, including a
literal 'tgId' email. The endpoint is unreleased, so no compatibility
concern.
2026-07-28 13:38:44 -07:00
|
|
|
}, nil
|
|
|
|
|
}
|
|
|
|
|
|
2026-11-05 09:02:39 -08:00
|
|
|
// Query aliases keep legacy dot-segment names addressable without changing path clients.
|
|
|
|
|
func clientEmailParam(c *gin.Context) (string, bool) {
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
email := c.Param("email")
|
2026-11-05 09:02:39 -08:00
|
|
|
if email == "" {
|
|
|
|
|
email = c.Query("email")
|
|
|
|
|
}
|
|
|
|
|
if email == "" {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), errors.New("client email is required"))
|
|
|
|
|
return "", false
|
|
|
|
|
}
|
|
|
|
|
return email, true
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) get(c *gin.Context) {
|
|
|
|
|
email, ok := clientEmailParam(c)
|
|
|
|
|
if !ok {
|
|
|
|
|
return
|
|
|
|
|
}
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
rec, err := a.clientService.GetRecordByEmail(nil, email)
|
|
|
|
|
if err != nil {
|
Bug-label issue sweep: 16 fixes (#6083)
* fix(xray): block private-range egress in default freedom finalRules (#6037)
With domainStrategy AsIs the router never resolves domains, so a domain
with a private A record (e.g. 127-0-0-1.nip.io) sails past the
geoip:private routing block and freedom's allow-all finalRules let it
reach loopback services such as the xray gRPC API and metrics listener.
Prepend a block rule for geoip:private to the default template and add
the FreedomFinalRulesPrivateEgressBlock seeder so existing installs
still carrying the stock allow-only (or legacy private-only-allow)
finalRules are upgraded in place; customized rules are left untouched.
* fix(sub): version-gate unencrypted-outbound drops in outbound subscriptions (#6033)
Commit d38c912d taught CheckXrayConfig to keep unencrypted vless/trojan
outbounds when the running core predates the v26.7.11 rejection, but
filterOutboundsRejectedByCore still consulted the embedded validator
unconditionally, so outbound subscriptions kept silently dropping those
outbounds even on downgraded cores.
Apply the same shouldSkipLegacyUnencryptedOutboundRejection gate when
filtering fetched subscription outbounds.
* fix(xray): resolve geodata assets before building outbound configs (#5928)
Saving routing or template settings validates each outbound through the
embedded config loader, and a freedom outbound whose finalRules
reference geoip:private opens geoip.dat during that build. Unlike
ApplyRoutingConfig, ValidateOutboundConfig and AddOutbound never pointed
the in-process loader at the bin folder, so xray-core resolved the file
relative to the panel executable and saving failed with
'stat /usr/local/x-ui/geoip.dat: no such file or directory'.
Call ensureXrayAssetLocation before both build paths.
* fix(api): use a real i18n key in the client get handler (#5911)
The client fetch endpoint localized its error prefix with the bare key
'get', which exists in no translation file, so every lookup of a deleted
client's email logged 'message "get" not found in language ...' noise
alongside the expected record-not-found warning. Reuse the same
pages.inbounds.toasts.obtain key the sibling list handler uses.
* fix(sub): carry host record Host header and path into Clash/JSON output (#5944)
The raw-link path overrides the host/path share params from a Host
record via applyEndpointHostPath, but the Clash and JSON renderers read
the transport settings object, which applyHostStreamOverrides never
touched — so a Host record's WebSocket Host header (and path) silently
vanished from Clash/Mihomo and JSON subscriptions whenever the inbound's
own ws settings left them empty.
Inject hostHeader/path into the ws/httpupgrade/xhttp settings of the
per-host stream, mirroring the raw-link override.
* fix(metrics): accept Unicode outbound tags in the observatory (#5972)
The observatory validator whitelisted ASCII word characters, so any
outbound whose tag carries a flag emoji or other non-ASCII text was
silently dropped from the metrics snapshot, delay history, and health
notifications. The history store is an in-process map, so the strict
charset bought nothing.
Validate tags as non-empty, bounded, control-character-free UTF-8
instead, keeping spaces and emoji while still rejecting garbage input on
the query path.
* fix(database): default sqlite to WAL to stop background-job lock storms (#6057, #6068)
With journal_mode=DELETE every write serializes the whole database and
blocks readers, so under normal multi-job load (traffic sampling, node
sync, mtproto reconcile) transactions regularly outwaited the 10s busy
timeout and jobs failed with 'database is locked'.
Move to WAL by default: readers no longer block writers and vice versa,
which removes the observed contention while writer-writer access still
serializes safely. The single-file-at-rest property is preserved where
it matters — Checkpoint() now issues wal_checkpoint(TRUNCATE), so panel
and Telegram backups read a complete main file, and sqlite folds the WAL
back into the db on clean shutdown. XUI_DB_JOURNAL_MODE=DELETE restores
the previous behavior for setups that copy the live file directly.
* fix(database): strip finalmask.tcp from REALITY inbounds on upgrade (#6038)
validateFinalMaskRealityCombo blocks saving finalmask.tcp together with
REALITY because that combination crashes Xray-core 26.7.11 on the first
connection (XTLS/Xray-core#6453), but it only runs on add/update. An
inbound saved before the validator existed sailed through the upgrade
untouched and took the core down at boot.
Add the InboundRealityFinalmaskTcpStrip seeder: one-time scan that
removes finalmask.tcp from REALITY inbounds (other finalmask transports
survive), so upgraded panels start cleanly.
* fix(xray): stop deleting hand-written direct routing rules on save (#6056)
The DNS allow-rule sync recognized 'its' rules purely by shape
(type=field, ip, port, outboundTag=direct, nothing else), so any manual
rule of that shape — e.g. routing a LAN CIDR to a NAS port over direct —
was silently stripped on every settings save.
Mark managed rules with ruleTag=xui-dns-allow (round-tripped untouched
by both xray-core and the Routing tab editor) and only strip rules that
carry the tag. Untagged legacy managed rules are adopted when their
exact ip-set/port matches a currently configured private DNS endpoint;
anything else is left alone. A stale pre-tag managed rule whose DNS
server was removed now lingers until deleted manually — the safe side of
the trade against eating user rules.
* fix(clients): resolve email lookups through client_inbounds after a move (#6059)
GetClientInboundByEmail trusted the client_traffics.inbound_id pointer
whenever that inbound still existed, but a client moved between inbounds
leaves the row pointing at its old (still existing) inbound. The lookup
then searched the wrong inbound's clients and failed with 'Client Not
Found In Inbound For Email', which broke the Telegram bot's link and QR
generation for moved clients.
When the pointed-at inbound no longer carries the email, re-resolve
through the authoritative client_inbounds link to the inbound that
actually hosts the client.
* fix(nodes): replicate inbound fallbacks to nodes (#5963)
Fallbacks live in the inbound_fallbacks table and were only merged into
settings by the master's local config builder; the runtime inbound
pushed to nodes rebuilt settings without them, and the reconcile job
additionally fingerprinted the raw DB row, so fallback edits neither
reached nodes nor triggered a re-push.
Inject settings.fallbacks in buildRuntimeInboundForAPI (mirroring the
local builder, gated on inboundCanHostFallbacks) and make ReconcileNode
push and fingerprint that same runtime-built payload, aligning the
interactive and reconcile paths.
* fix(database): survive PostgreSQL outages without a runaway restart loop (#6023)
A PostgreSQL that was down or still starting made InitDB fail instantly;
the process exited with a generic startup error and systemd restarted it
every 5s forever, flooding the journal.
Retry the initial postgres connection with backoff (~70s total) and log
the real driver error on every attempt, and cap the systemd units with
StartLimitIntervalSec/StartLimitBurst so a persistently unreachable
database stops the unit instead of looping indefinitely.
* fix(xray): force a full restart when REALITY stream settings change (#6010)
A changed inbound is normally hot-swapped over gRPC as RemoveInbound +
AddInbound, but xray-core does not reliably rebuild a REALITY listener's
authenticator on a runtime re-add — key or shortId edits appeared
applied yet clients kept authenticating against the old parameters until
someone restarted the core manually, on nodes in particular.
Treat any non-client change to an inbound that uses (or starts using)
REALITY as not hot-appliable so the panel restarts the core instead.
Client-only edits on REALITY inbounds keep flowing through the per-user
AlterInbound path and still avoid restarts.
* feat(sub): allow insecure TLS for outbound subscription fetches (#6067)
An outbound subscription served over HTTPS with a self-signed or
private-CA certificate could never be fetched: the fetch client had no
TLS options, so refreshes died with 'x509: certificate signed by unknown
authority' and there was nothing the admin could toggle.
Add a per-subscription 'Allow insecure' switch (persisted as
allow_insecure, default off) that sets InsecureSkipVerify on the fetch
transport — including when the fetch is routed through the panel egress
proxy. The SSRF-guarded dialer and redirect re-validation stay in force
either way.
* fix(reality): send PROXY protocol header in the target scanner when xver is set (#6082)
The REALITY target scanner always probed with a plain TLS handshake, so
a target fronted by an Nginx listener that requires the PROXY protocol
(matching the inbound's xver>=1) reset the connection and the panel
reported a false 'TLS handshake failed'.
Thread the inbound's xver into the scan request and, when it is >=1,
lead with the matching PROXY protocol header (v1 for xver 1, binary v2
for xver 2) built from the dialed connection's own address pair. Batch
candidate scans against public sites are unaffected (xver 0).
* fix(frontend): default sockopt fields when editing a stored inbound (#5956)
Opening an existing inbound ran rawInboundToFormValues over the raw DB
row, and only xhttpSettings was re-parsed through its Zod schema to fill
defaults. A sockopt object saved before the TProxy control existed has
no tproxy key, so the Select rendered blank; picking Off didn't help
because the wire normalizer drops tproxy=off, recreating the missing
key on the next edit.
Re-parse streamSettings.sockopt through SockoptStreamSettingsSchema on
load, mirroring the xhttpSettings handling, so absent keys (tproxy,
tcpcongestion, …) get their schema defaults every time the form opens.
2026-07-23 06:34:42 -07:00
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.obtain"), err)
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
return
|
|
|
|
|
}
|
feat(api): add GET endpoint to look up clients by Telegram ID (#5945)
* feat(api): add GET endpoint to look up clients by Telegram ID
GET /panel/api/clients/getByTgId/:tgId returns all clients matching the given Telegram user ID. tgId is not unique, so the response is an array of {client, inboundIds, externalLinks, usedTraffic} objects.
* fix: guard tgId=0 sentinel, index tg_id, deduplicate enrichment in getByTgId
Three issues from the code review on the new GET /panel/api/clients/getByTgId/:tgId
endpoint: the lookup did not short-circuit tgId <= 0 (this codebase's sentinel
for 'no Telegram ID'), had no index on clients.tg_id causing a full table scan
on every call, and duplicated the per-record enrichment (inbound IDs, external
links, effective flow, traffic) identically between get and getByTgId.
- Reject tgId <= 0 in GetRecordsByTgId with a clear error, matching the
'0 = none' convention used elsewhere in the codebase.
- Add index:idx_clients_tg_id to ClientRecord.TgID (struct tag + idempotent
startup migration for existing databases).
- Extract buildClientPayload helper used by both get and getByTgId.
- Update client_lookup_test.go to verify sentinel rejection instead of
expecting tgId=0 to be a valid lookup.
* refactor(api): move Telegram client lookup under /get/tgId/:tgId
Nest the Telegram-ID lookup beside the email lookup as /get/tgId/:tgId
instead of the flat /getByTgId/:tgId, so both client fetch routes share the
/get prefix. Gin resolves the static tgId segment ahead of the :email
wildcard, so /get/:email keeps matching plain email lookups, including a
literal 'tgId' email. The endpoint is unreleased, so no compatibility
concern.
2026-07-28 13:38:44 -07:00
|
|
|
payload, err := a.buildClientPayload(rec)
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
if err != nil {
|
Bug-label issue sweep: 16 fixes (#6083)
* fix(xray): block private-range egress in default freedom finalRules (#6037)
With domainStrategy AsIs the router never resolves domains, so a domain
with a private A record (e.g. 127-0-0-1.nip.io) sails past the
geoip:private routing block and freedom's allow-all finalRules let it
reach loopback services such as the xray gRPC API and metrics listener.
Prepend a block rule for geoip:private to the default template and add
the FreedomFinalRulesPrivateEgressBlock seeder so existing installs
still carrying the stock allow-only (or legacy private-only-allow)
finalRules are upgraded in place; customized rules are left untouched.
* fix(sub): version-gate unencrypted-outbound drops in outbound subscriptions (#6033)
Commit d38c912d taught CheckXrayConfig to keep unencrypted vless/trojan
outbounds when the running core predates the v26.7.11 rejection, but
filterOutboundsRejectedByCore still consulted the embedded validator
unconditionally, so outbound subscriptions kept silently dropping those
outbounds even on downgraded cores.
Apply the same shouldSkipLegacyUnencryptedOutboundRejection gate when
filtering fetched subscription outbounds.
* fix(xray): resolve geodata assets before building outbound configs (#5928)
Saving routing or template settings validates each outbound through the
embedded config loader, and a freedom outbound whose finalRules
reference geoip:private opens geoip.dat during that build. Unlike
ApplyRoutingConfig, ValidateOutboundConfig and AddOutbound never pointed
the in-process loader at the bin folder, so xray-core resolved the file
relative to the panel executable and saving failed with
'stat /usr/local/x-ui/geoip.dat: no such file or directory'.
Call ensureXrayAssetLocation before both build paths.
* fix(api): use a real i18n key in the client get handler (#5911)
The client fetch endpoint localized its error prefix with the bare key
'get', which exists in no translation file, so every lookup of a deleted
client's email logged 'message "get" not found in language ...' noise
alongside the expected record-not-found warning. Reuse the same
pages.inbounds.toasts.obtain key the sibling list handler uses.
* fix(sub): carry host record Host header and path into Clash/JSON output (#5944)
The raw-link path overrides the host/path share params from a Host
record via applyEndpointHostPath, but the Clash and JSON renderers read
the transport settings object, which applyHostStreamOverrides never
touched — so a Host record's WebSocket Host header (and path) silently
vanished from Clash/Mihomo and JSON subscriptions whenever the inbound's
own ws settings left them empty.
Inject hostHeader/path into the ws/httpupgrade/xhttp settings of the
per-host stream, mirroring the raw-link override.
* fix(metrics): accept Unicode outbound tags in the observatory (#5972)
The observatory validator whitelisted ASCII word characters, so any
outbound whose tag carries a flag emoji or other non-ASCII text was
silently dropped from the metrics snapshot, delay history, and health
notifications. The history store is an in-process map, so the strict
charset bought nothing.
Validate tags as non-empty, bounded, control-character-free UTF-8
instead, keeping spaces and emoji while still rejecting garbage input on
the query path.
* fix(database): default sqlite to WAL to stop background-job lock storms (#6057, #6068)
With journal_mode=DELETE every write serializes the whole database and
blocks readers, so under normal multi-job load (traffic sampling, node
sync, mtproto reconcile) transactions regularly outwaited the 10s busy
timeout and jobs failed with 'database is locked'.
Move to WAL by default: readers no longer block writers and vice versa,
which removes the observed contention while writer-writer access still
serializes safely. The single-file-at-rest property is preserved where
it matters — Checkpoint() now issues wal_checkpoint(TRUNCATE), so panel
and Telegram backups read a complete main file, and sqlite folds the WAL
back into the db on clean shutdown. XUI_DB_JOURNAL_MODE=DELETE restores
the previous behavior for setups that copy the live file directly.
* fix(database): strip finalmask.tcp from REALITY inbounds on upgrade (#6038)
validateFinalMaskRealityCombo blocks saving finalmask.tcp together with
REALITY because that combination crashes Xray-core 26.7.11 on the first
connection (XTLS/Xray-core#6453), but it only runs on add/update. An
inbound saved before the validator existed sailed through the upgrade
untouched and took the core down at boot.
Add the InboundRealityFinalmaskTcpStrip seeder: one-time scan that
removes finalmask.tcp from REALITY inbounds (other finalmask transports
survive), so upgraded panels start cleanly.
* fix(xray): stop deleting hand-written direct routing rules on save (#6056)
The DNS allow-rule sync recognized 'its' rules purely by shape
(type=field, ip, port, outboundTag=direct, nothing else), so any manual
rule of that shape — e.g. routing a LAN CIDR to a NAS port over direct —
was silently stripped on every settings save.
Mark managed rules with ruleTag=xui-dns-allow (round-tripped untouched
by both xray-core and the Routing tab editor) and only strip rules that
carry the tag. Untagged legacy managed rules are adopted when their
exact ip-set/port matches a currently configured private DNS endpoint;
anything else is left alone. A stale pre-tag managed rule whose DNS
server was removed now lingers until deleted manually — the safe side of
the trade against eating user rules.
* fix(clients): resolve email lookups through client_inbounds after a move (#6059)
GetClientInboundByEmail trusted the client_traffics.inbound_id pointer
whenever that inbound still existed, but a client moved between inbounds
leaves the row pointing at its old (still existing) inbound. The lookup
then searched the wrong inbound's clients and failed with 'Client Not
Found In Inbound For Email', which broke the Telegram bot's link and QR
generation for moved clients.
When the pointed-at inbound no longer carries the email, re-resolve
through the authoritative client_inbounds link to the inbound that
actually hosts the client.
* fix(nodes): replicate inbound fallbacks to nodes (#5963)
Fallbacks live in the inbound_fallbacks table and were only merged into
settings by the master's local config builder; the runtime inbound
pushed to nodes rebuilt settings without them, and the reconcile job
additionally fingerprinted the raw DB row, so fallback edits neither
reached nodes nor triggered a re-push.
Inject settings.fallbacks in buildRuntimeInboundForAPI (mirroring the
local builder, gated on inboundCanHostFallbacks) and make ReconcileNode
push and fingerprint that same runtime-built payload, aligning the
interactive and reconcile paths.
* fix(database): survive PostgreSQL outages without a runaway restart loop (#6023)
A PostgreSQL that was down or still starting made InitDB fail instantly;
the process exited with a generic startup error and systemd restarted it
every 5s forever, flooding the journal.
Retry the initial postgres connection with backoff (~70s total) and log
the real driver error on every attempt, and cap the systemd units with
StartLimitIntervalSec/StartLimitBurst so a persistently unreachable
database stops the unit instead of looping indefinitely.
* fix(xray): force a full restart when REALITY stream settings change (#6010)
A changed inbound is normally hot-swapped over gRPC as RemoveInbound +
AddInbound, but xray-core does not reliably rebuild a REALITY listener's
authenticator on a runtime re-add — key or shortId edits appeared
applied yet clients kept authenticating against the old parameters until
someone restarted the core manually, on nodes in particular.
Treat any non-client change to an inbound that uses (or starts using)
REALITY as not hot-appliable so the panel restarts the core instead.
Client-only edits on REALITY inbounds keep flowing through the per-user
AlterInbound path and still avoid restarts.
* feat(sub): allow insecure TLS for outbound subscription fetches (#6067)
An outbound subscription served over HTTPS with a self-signed or
private-CA certificate could never be fetched: the fetch client had no
TLS options, so refreshes died with 'x509: certificate signed by unknown
authority' and there was nothing the admin could toggle.
Add a per-subscription 'Allow insecure' switch (persisted as
allow_insecure, default off) that sets InsecureSkipVerify on the fetch
transport — including when the fetch is routed through the panel egress
proxy. The SSRF-guarded dialer and redirect re-validation stay in force
either way.
* fix(reality): send PROXY protocol header in the target scanner when xver is set (#6082)
The REALITY target scanner always probed with a plain TLS handshake, so
a target fronted by an Nginx listener that requires the PROXY protocol
(matching the inbound's xver>=1) reset the connection and the panel
reported a false 'TLS handshake failed'.
Thread the inbound's xver into the scan request and, when it is >=1,
lead with the matching PROXY protocol header (v1 for xver 1, binary v2
for xver 2) built from the dialed connection's own address pair. Batch
candidate scans against public sites are unaffected (xver 0).
* fix(frontend): default sockopt fields when editing a stored inbound (#5956)
Opening an existing inbound ran rawInboundToFormValues over the raw DB
row, and only xhttpSettings was re-parsed through its Zod schema to fill
defaults. A sockopt object saved before the TProxy control existed has
no tproxy key, so the Select rendered blank; picking Off didn't help
because the wire normalizer drops tproxy=off, recreating the missing
key on the next edit.
Re-parse streamSettings.sockopt through SockoptStreamSettingsSchema on
load, mirroring the xhttpSettings handling, so absent keys (tproxy,
tcpcongestion, …) get their schema defaults every time the form opens.
2026-07-23 06:34:42 -07:00
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.obtain"), err)
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
return
|
|
|
|
|
}
|
feat(api): add GET endpoint to look up clients by Telegram ID (#5945)
* feat(api): add GET endpoint to look up clients by Telegram ID
GET /panel/api/clients/getByTgId/:tgId returns all clients matching the given Telegram user ID. tgId is not unique, so the response is an array of {client, inboundIds, externalLinks, usedTraffic} objects.
* fix: guard tgId=0 sentinel, index tg_id, deduplicate enrichment in getByTgId
Three issues from the code review on the new GET /panel/api/clients/getByTgId/:tgId
endpoint: the lookup did not short-circuit tgId <= 0 (this codebase's sentinel
for 'no Telegram ID'), had no index on clients.tg_id causing a full table scan
on every call, and duplicated the per-record enrichment (inbound IDs, external
links, effective flow, traffic) identically between get and getByTgId.
- Reject tgId <= 0 in GetRecordsByTgId with a clear error, matching the
'0 = none' convention used elsewhere in the codebase.
- Add index:idx_clients_tg_id to ClientRecord.TgID (struct tag + idempotent
startup migration for existing databases).
- Extract buildClientPayload helper used by both get and getByTgId.
- Update client_lookup_test.go to verify sentinel rejection instead of
expecting tgId=0 to be a valid lookup.
* refactor(api): move Telegram client lookup under /get/tgId/:tgId
Nest the Telegram-ID lookup beside the email lookup as /get/tgId/:tgId
instead of the flat /getByTgId/:tgId, so both client fetch routes share the
/get prefix. Gin resolves the static tgId segment ahead of the :email
wildcard, so /get/:email keeps matching plain email lookups, including a
literal 'tgId' email. The endpoint is unreleased, so no compatibility
concern.
2026-07-28 13:38:44 -07:00
|
|
|
jsonObj(c, payload, nil)
|
|
|
|
|
}
|
|
|
|
|
|
2026-10-23 19:54:14 -07:00
|
|
|
func (a *ClientController) getBySubId(c *gin.Context) {
|
|
|
|
|
records, err := a.clientService.GetRecordsBySubID(c.Param("subId"))
|
|
|
|
|
if err == nil && len(records) == 0 {
|
|
|
|
|
err = gorm.ErrRecordNotFound
|
|
|
|
|
}
|
|
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.obtain"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
results := make([]gin.H, 0, len(records))
|
|
|
|
|
for _, rec := range records {
|
|
|
|
|
payload, err := a.buildClientPayload(rec)
|
|
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.obtain"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
results = append(results, payload)
|
|
|
|
|
}
|
|
|
|
|
jsonObj(c, results, nil)
|
|
|
|
|
}
|
|
|
|
|
|
feat(api): add GET endpoint to look up clients by Telegram ID (#5945)
* feat(api): add GET endpoint to look up clients by Telegram ID
GET /panel/api/clients/getByTgId/:tgId returns all clients matching the given Telegram user ID. tgId is not unique, so the response is an array of {client, inboundIds, externalLinks, usedTraffic} objects.
* fix: guard tgId=0 sentinel, index tg_id, deduplicate enrichment in getByTgId
Three issues from the code review on the new GET /panel/api/clients/getByTgId/:tgId
endpoint: the lookup did not short-circuit tgId <= 0 (this codebase's sentinel
for 'no Telegram ID'), had no index on clients.tg_id causing a full table scan
on every call, and duplicated the per-record enrichment (inbound IDs, external
links, effective flow, traffic) identically between get and getByTgId.
- Reject tgId <= 0 in GetRecordsByTgId with a clear error, matching the
'0 = none' convention used elsewhere in the codebase.
- Add index:idx_clients_tg_id to ClientRecord.TgID (struct tag + idempotent
startup migration for existing databases).
- Extract buildClientPayload helper used by both get and getByTgId.
- Update client_lookup_test.go to verify sentinel rejection instead of
expecting tgId=0 to be a valid lookup.
* refactor(api): move Telegram client lookup under /get/tgId/:tgId
Nest the Telegram-ID lookup beside the email lookup as /get/tgId/:tgId
instead of the flat /getByTgId/:tgId, so both client fetch routes share the
/get prefix. Gin resolves the static tgId segment ahead of the :email
wildcard, so /get/:email keeps matching plain email lookups, including a
literal 'tgId' email. The endpoint is unreleased, so no compatibility
concern.
2026-07-28 13:38:44 -07:00
|
|
|
func (a *ClientController) getByTgId(c *gin.Context) {
|
|
|
|
|
tgIdStr := c.Param("tgId")
|
|
|
|
|
tgId, err := strconv.ParseInt(tgIdStr, 10, 64)
|
2026-06-14 11:57:14 -07:00
|
|
|
if err != nil {
|
Bug-label issue sweep: 16 fixes (#6083)
* fix(xray): block private-range egress in default freedom finalRules (#6037)
With domainStrategy AsIs the router never resolves domains, so a domain
with a private A record (e.g. 127-0-0-1.nip.io) sails past the
geoip:private routing block and freedom's allow-all finalRules let it
reach loopback services such as the xray gRPC API and metrics listener.
Prepend a block rule for geoip:private to the default template and add
the FreedomFinalRulesPrivateEgressBlock seeder so existing installs
still carrying the stock allow-only (or legacy private-only-allow)
finalRules are upgraded in place; customized rules are left untouched.
* fix(sub): version-gate unencrypted-outbound drops in outbound subscriptions (#6033)
Commit d38c912d taught CheckXrayConfig to keep unencrypted vless/trojan
outbounds when the running core predates the v26.7.11 rejection, but
filterOutboundsRejectedByCore still consulted the embedded validator
unconditionally, so outbound subscriptions kept silently dropping those
outbounds even on downgraded cores.
Apply the same shouldSkipLegacyUnencryptedOutboundRejection gate when
filtering fetched subscription outbounds.
* fix(xray): resolve geodata assets before building outbound configs (#5928)
Saving routing or template settings validates each outbound through the
embedded config loader, and a freedom outbound whose finalRules
reference geoip:private opens geoip.dat during that build. Unlike
ApplyRoutingConfig, ValidateOutboundConfig and AddOutbound never pointed
the in-process loader at the bin folder, so xray-core resolved the file
relative to the panel executable and saving failed with
'stat /usr/local/x-ui/geoip.dat: no such file or directory'.
Call ensureXrayAssetLocation before both build paths.
* fix(api): use a real i18n key in the client get handler (#5911)
The client fetch endpoint localized its error prefix with the bare key
'get', which exists in no translation file, so every lookup of a deleted
client's email logged 'message "get" not found in language ...' noise
alongside the expected record-not-found warning. Reuse the same
pages.inbounds.toasts.obtain key the sibling list handler uses.
* fix(sub): carry host record Host header and path into Clash/JSON output (#5944)
The raw-link path overrides the host/path share params from a Host
record via applyEndpointHostPath, but the Clash and JSON renderers read
the transport settings object, which applyHostStreamOverrides never
touched — so a Host record's WebSocket Host header (and path) silently
vanished from Clash/Mihomo and JSON subscriptions whenever the inbound's
own ws settings left them empty.
Inject hostHeader/path into the ws/httpupgrade/xhttp settings of the
per-host stream, mirroring the raw-link override.
* fix(metrics): accept Unicode outbound tags in the observatory (#5972)
The observatory validator whitelisted ASCII word characters, so any
outbound whose tag carries a flag emoji or other non-ASCII text was
silently dropped from the metrics snapshot, delay history, and health
notifications. The history store is an in-process map, so the strict
charset bought nothing.
Validate tags as non-empty, bounded, control-character-free UTF-8
instead, keeping spaces and emoji while still rejecting garbage input on
the query path.
* fix(database): default sqlite to WAL to stop background-job lock storms (#6057, #6068)
With journal_mode=DELETE every write serializes the whole database and
blocks readers, so under normal multi-job load (traffic sampling, node
sync, mtproto reconcile) transactions regularly outwaited the 10s busy
timeout and jobs failed with 'database is locked'.
Move to WAL by default: readers no longer block writers and vice versa,
which removes the observed contention while writer-writer access still
serializes safely. The single-file-at-rest property is preserved where
it matters — Checkpoint() now issues wal_checkpoint(TRUNCATE), so panel
and Telegram backups read a complete main file, and sqlite folds the WAL
back into the db on clean shutdown. XUI_DB_JOURNAL_MODE=DELETE restores
the previous behavior for setups that copy the live file directly.
* fix(database): strip finalmask.tcp from REALITY inbounds on upgrade (#6038)
validateFinalMaskRealityCombo blocks saving finalmask.tcp together with
REALITY because that combination crashes Xray-core 26.7.11 on the first
connection (XTLS/Xray-core#6453), but it only runs on add/update. An
inbound saved before the validator existed sailed through the upgrade
untouched and took the core down at boot.
Add the InboundRealityFinalmaskTcpStrip seeder: one-time scan that
removes finalmask.tcp from REALITY inbounds (other finalmask transports
survive), so upgraded panels start cleanly.
* fix(xray): stop deleting hand-written direct routing rules on save (#6056)
The DNS allow-rule sync recognized 'its' rules purely by shape
(type=field, ip, port, outboundTag=direct, nothing else), so any manual
rule of that shape — e.g. routing a LAN CIDR to a NAS port over direct —
was silently stripped on every settings save.
Mark managed rules with ruleTag=xui-dns-allow (round-tripped untouched
by both xray-core and the Routing tab editor) and only strip rules that
carry the tag. Untagged legacy managed rules are adopted when their
exact ip-set/port matches a currently configured private DNS endpoint;
anything else is left alone. A stale pre-tag managed rule whose DNS
server was removed now lingers until deleted manually — the safe side of
the trade against eating user rules.
* fix(clients): resolve email lookups through client_inbounds after a move (#6059)
GetClientInboundByEmail trusted the client_traffics.inbound_id pointer
whenever that inbound still existed, but a client moved between inbounds
leaves the row pointing at its old (still existing) inbound. The lookup
then searched the wrong inbound's clients and failed with 'Client Not
Found In Inbound For Email', which broke the Telegram bot's link and QR
generation for moved clients.
When the pointed-at inbound no longer carries the email, re-resolve
through the authoritative client_inbounds link to the inbound that
actually hosts the client.
* fix(nodes): replicate inbound fallbacks to nodes (#5963)
Fallbacks live in the inbound_fallbacks table and were only merged into
settings by the master's local config builder; the runtime inbound
pushed to nodes rebuilt settings without them, and the reconcile job
additionally fingerprinted the raw DB row, so fallback edits neither
reached nodes nor triggered a re-push.
Inject settings.fallbacks in buildRuntimeInboundForAPI (mirroring the
local builder, gated on inboundCanHostFallbacks) and make ReconcileNode
push and fingerprint that same runtime-built payload, aligning the
interactive and reconcile paths.
* fix(database): survive PostgreSQL outages without a runaway restart loop (#6023)
A PostgreSQL that was down or still starting made InitDB fail instantly;
the process exited with a generic startup error and systemd restarted it
every 5s forever, flooding the journal.
Retry the initial postgres connection with backoff (~70s total) and log
the real driver error on every attempt, and cap the systemd units with
StartLimitIntervalSec/StartLimitBurst so a persistently unreachable
database stops the unit instead of looping indefinitely.
* fix(xray): force a full restart when REALITY stream settings change (#6010)
A changed inbound is normally hot-swapped over gRPC as RemoveInbound +
AddInbound, but xray-core does not reliably rebuild a REALITY listener's
authenticator on a runtime re-add — key or shortId edits appeared
applied yet clients kept authenticating against the old parameters until
someone restarted the core manually, on nodes in particular.
Treat any non-client change to an inbound that uses (or starts using)
REALITY as not hot-appliable so the panel restarts the core instead.
Client-only edits on REALITY inbounds keep flowing through the per-user
AlterInbound path and still avoid restarts.
* feat(sub): allow insecure TLS for outbound subscription fetches (#6067)
An outbound subscription served over HTTPS with a self-signed or
private-CA certificate could never be fetched: the fetch client had no
TLS options, so refreshes died with 'x509: certificate signed by unknown
authority' and there was nothing the admin could toggle.
Add a per-subscription 'Allow insecure' switch (persisted as
allow_insecure, default off) that sets InsecureSkipVerify on the fetch
transport — including when the fetch is routed through the panel egress
proxy. The SSRF-guarded dialer and redirect re-validation stay in force
either way.
* fix(reality): send PROXY protocol header in the target scanner when xver is set (#6082)
The REALITY target scanner always probed with a plain TLS handshake, so
a target fronted by an Nginx listener that requires the PROXY protocol
(matching the inbound's xver>=1) reset the connection and the panel
reported a false 'TLS handshake failed'.
Thread the inbound's xver into the scan request and, when it is >=1,
lead with the matching PROXY protocol header (v1 for xver 1, binary v2
for xver 2) built from the dialed connection's own address pair. Batch
candidate scans against public sites are unaffected (xver 0).
* fix(frontend): default sockopt fields when editing a stored inbound (#5956)
Opening an existing inbound ran rawInboundToFormValues over the raw DB
row, and only xhttpSettings was re-parsed through its Zod schema to fill
defaults. A sockopt object saved before the TProxy control existed has
no tproxy key, so the Select rendered blank; picking Off didn't help
because the wire normalizer drops tproxy=off, recreating the missing
key on the next edit.
Re-parse streamSettings.sockopt through SockoptStreamSettingsSchema on
load, mirroring the xhttpSettings handling, so absent keys (tproxy,
tcpcongestion, …) get their schema defaults every time the form opens.
2026-07-23 06:34:42 -07:00
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.obtain"), err)
|
2026-06-14 11:57:14 -07:00
|
|
|
return
|
|
|
|
|
}
|
feat(api): add GET endpoint to look up clients by Telegram ID (#5945)
* feat(api): add GET endpoint to look up clients by Telegram ID
GET /panel/api/clients/getByTgId/:tgId returns all clients matching the given Telegram user ID. tgId is not unique, so the response is an array of {client, inboundIds, externalLinks, usedTraffic} objects.
* fix: guard tgId=0 sentinel, index tg_id, deduplicate enrichment in getByTgId
Three issues from the code review on the new GET /panel/api/clients/getByTgId/:tgId
endpoint: the lookup did not short-circuit tgId <= 0 (this codebase's sentinel
for 'no Telegram ID'), had no index on clients.tg_id causing a full table scan
on every call, and duplicated the per-record enrichment (inbound IDs, external
links, effective flow, traffic) identically between get and getByTgId.
- Reject tgId <= 0 in GetRecordsByTgId with a clear error, matching the
'0 = none' convention used elsewhere in the codebase.
- Add index:idx_clients_tg_id to ClientRecord.TgID (struct tag + idempotent
startup migration for existing databases).
- Extract buildClientPayload helper used by both get and getByTgId.
- Update client_lookup_test.go to verify sentinel rejection instead of
expecting tgId=0 to be a valid lookup.
* refactor(api): move Telegram client lookup under /get/tgId/:tgId
Nest the Telegram-ID lookup beside the email lookup as /get/tgId/:tgId
instead of the flat /getByTgId/:tgId, so both client fetch routes share the
/get prefix. Gin resolves the static tgId segment ahead of the :email
wildcard, so /get/:email keeps matching plain email lookups, including a
literal 'tgId' email. The endpoint is unreleased, so no compatibility
concern.
2026-07-28 13:38:44 -07:00
|
|
|
records, err := a.clientService.GetRecordsByTgID(tgId)
|
2026-06-02 06:32:48 -07:00
|
|
|
if err != nil {
|
Bug-label issue sweep: 16 fixes (#6083)
* fix(xray): block private-range egress in default freedom finalRules (#6037)
With domainStrategy AsIs the router never resolves domains, so a domain
with a private A record (e.g. 127-0-0-1.nip.io) sails past the
geoip:private routing block and freedom's allow-all finalRules let it
reach loopback services such as the xray gRPC API and metrics listener.
Prepend a block rule for geoip:private to the default template and add
the FreedomFinalRulesPrivateEgressBlock seeder so existing installs
still carrying the stock allow-only (or legacy private-only-allow)
finalRules are upgraded in place; customized rules are left untouched.
* fix(sub): version-gate unencrypted-outbound drops in outbound subscriptions (#6033)
Commit d38c912d taught CheckXrayConfig to keep unencrypted vless/trojan
outbounds when the running core predates the v26.7.11 rejection, but
filterOutboundsRejectedByCore still consulted the embedded validator
unconditionally, so outbound subscriptions kept silently dropping those
outbounds even on downgraded cores.
Apply the same shouldSkipLegacyUnencryptedOutboundRejection gate when
filtering fetched subscription outbounds.
* fix(xray): resolve geodata assets before building outbound configs (#5928)
Saving routing or template settings validates each outbound through the
embedded config loader, and a freedom outbound whose finalRules
reference geoip:private opens geoip.dat during that build. Unlike
ApplyRoutingConfig, ValidateOutboundConfig and AddOutbound never pointed
the in-process loader at the bin folder, so xray-core resolved the file
relative to the panel executable and saving failed with
'stat /usr/local/x-ui/geoip.dat: no such file or directory'.
Call ensureXrayAssetLocation before both build paths.
* fix(api): use a real i18n key in the client get handler (#5911)
The client fetch endpoint localized its error prefix with the bare key
'get', which exists in no translation file, so every lookup of a deleted
client's email logged 'message "get" not found in language ...' noise
alongside the expected record-not-found warning. Reuse the same
pages.inbounds.toasts.obtain key the sibling list handler uses.
* fix(sub): carry host record Host header and path into Clash/JSON output (#5944)
The raw-link path overrides the host/path share params from a Host
record via applyEndpointHostPath, but the Clash and JSON renderers read
the transport settings object, which applyHostStreamOverrides never
touched — so a Host record's WebSocket Host header (and path) silently
vanished from Clash/Mihomo and JSON subscriptions whenever the inbound's
own ws settings left them empty.
Inject hostHeader/path into the ws/httpupgrade/xhttp settings of the
per-host stream, mirroring the raw-link override.
* fix(metrics): accept Unicode outbound tags in the observatory (#5972)
The observatory validator whitelisted ASCII word characters, so any
outbound whose tag carries a flag emoji or other non-ASCII text was
silently dropped from the metrics snapshot, delay history, and health
notifications. The history store is an in-process map, so the strict
charset bought nothing.
Validate tags as non-empty, bounded, control-character-free UTF-8
instead, keeping spaces and emoji while still rejecting garbage input on
the query path.
* fix(database): default sqlite to WAL to stop background-job lock storms (#6057, #6068)
With journal_mode=DELETE every write serializes the whole database and
blocks readers, so under normal multi-job load (traffic sampling, node
sync, mtproto reconcile) transactions regularly outwaited the 10s busy
timeout and jobs failed with 'database is locked'.
Move to WAL by default: readers no longer block writers and vice versa,
which removes the observed contention while writer-writer access still
serializes safely. The single-file-at-rest property is preserved where
it matters — Checkpoint() now issues wal_checkpoint(TRUNCATE), so panel
and Telegram backups read a complete main file, and sqlite folds the WAL
back into the db on clean shutdown. XUI_DB_JOURNAL_MODE=DELETE restores
the previous behavior for setups that copy the live file directly.
* fix(database): strip finalmask.tcp from REALITY inbounds on upgrade (#6038)
validateFinalMaskRealityCombo blocks saving finalmask.tcp together with
REALITY because that combination crashes Xray-core 26.7.11 on the first
connection (XTLS/Xray-core#6453), but it only runs on add/update. An
inbound saved before the validator existed sailed through the upgrade
untouched and took the core down at boot.
Add the InboundRealityFinalmaskTcpStrip seeder: one-time scan that
removes finalmask.tcp from REALITY inbounds (other finalmask transports
survive), so upgraded panels start cleanly.
* fix(xray): stop deleting hand-written direct routing rules on save (#6056)
The DNS allow-rule sync recognized 'its' rules purely by shape
(type=field, ip, port, outboundTag=direct, nothing else), so any manual
rule of that shape — e.g. routing a LAN CIDR to a NAS port over direct —
was silently stripped on every settings save.
Mark managed rules with ruleTag=xui-dns-allow (round-tripped untouched
by both xray-core and the Routing tab editor) and only strip rules that
carry the tag. Untagged legacy managed rules are adopted when their
exact ip-set/port matches a currently configured private DNS endpoint;
anything else is left alone. A stale pre-tag managed rule whose DNS
server was removed now lingers until deleted manually — the safe side of
the trade against eating user rules.
* fix(clients): resolve email lookups through client_inbounds after a move (#6059)
GetClientInboundByEmail trusted the client_traffics.inbound_id pointer
whenever that inbound still existed, but a client moved between inbounds
leaves the row pointing at its old (still existing) inbound. The lookup
then searched the wrong inbound's clients and failed with 'Client Not
Found In Inbound For Email', which broke the Telegram bot's link and QR
generation for moved clients.
When the pointed-at inbound no longer carries the email, re-resolve
through the authoritative client_inbounds link to the inbound that
actually hosts the client.
* fix(nodes): replicate inbound fallbacks to nodes (#5963)
Fallbacks live in the inbound_fallbacks table and were only merged into
settings by the master's local config builder; the runtime inbound
pushed to nodes rebuilt settings without them, and the reconcile job
additionally fingerprinted the raw DB row, so fallback edits neither
reached nodes nor triggered a re-push.
Inject settings.fallbacks in buildRuntimeInboundForAPI (mirroring the
local builder, gated on inboundCanHostFallbacks) and make ReconcileNode
push and fingerprint that same runtime-built payload, aligning the
interactive and reconcile paths.
* fix(database): survive PostgreSQL outages without a runaway restart loop (#6023)
A PostgreSQL that was down or still starting made InitDB fail instantly;
the process exited with a generic startup error and systemd restarted it
every 5s forever, flooding the journal.
Retry the initial postgres connection with backoff (~70s total) and log
the real driver error on every attempt, and cap the systemd units with
StartLimitIntervalSec/StartLimitBurst so a persistently unreachable
database stops the unit instead of looping indefinitely.
* fix(xray): force a full restart when REALITY stream settings change (#6010)
A changed inbound is normally hot-swapped over gRPC as RemoveInbound +
AddInbound, but xray-core does not reliably rebuild a REALITY listener's
authenticator on a runtime re-add — key or shortId edits appeared
applied yet clients kept authenticating against the old parameters until
someone restarted the core manually, on nodes in particular.
Treat any non-client change to an inbound that uses (or starts using)
REALITY as not hot-appliable so the panel restarts the core instead.
Client-only edits on REALITY inbounds keep flowing through the per-user
AlterInbound path and still avoid restarts.
* feat(sub): allow insecure TLS for outbound subscription fetches (#6067)
An outbound subscription served over HTTPS with a self-signed or
private-CA certificate could never be fetched: the fetch client had no
TLS options, so refreshes died with 'x509: certificate signed by unknown
authority' and there was nothing the admin could toggle.
Add a per-subscription 'Allow insecure' switch (persisted as
allow_insecure, default off) that sets InsecureSkipVerify on the fetch
transport — including when the fetch is routed through the panel egress
proxy. The SSRF-guarded dialer and redirect re-validation stay in force
either way.
* fix(reality): send PROXY protocol header in the target scanner when xver is set (#6082)
The REALITY target scanner always probed with a plain TLS handshake, so
a target fronted by an Nginx listener that requires the PROXY protocol
(matching the inbound's xver>=1) reset the connection and the panel
reported a false 'TLS handshake failed'.
Thread the inbound's xver into the scan request and, when it is >=1,
lead with the matching PROXY protocol header (v1 for xver 1, binary v2
for xver 2) built from the dialed connection's own address pair. Batch
candidate scans against public sites are unaffected (xver 0).
* fix(frontend): default sockopt fields when editing a stored inbound (#5956)
Opening an existing inbound ran rawInboundToFormValues over the raw DB
row, and only xhttpSettings was re-parsed through its Zod schema to fill
defaults. A sockopt object saved before the TProxy control existed has
no tproxy key, so the Select rendered blank; picking Off didn't help
because the wire normalizer drops tproxy=off, recreating the missing
key on the next edit.
Re-parse streamSettings.sockopt through SockoptStreamSettingsSchema on
load, mirroring the xhttpSettings handling, so absent keys (tproxy,
tcpcongestion, …) get their schema defaults every time the form opens.
2026-07-23 06:34:42 -07:00
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.obtain"), err)
|
2026-06-02 06:32:48 -07:00
|
|
|
return
|
|
|
|
|
}
|
feat(api): add GET endpoint to look up clients by Telegram ID (#5945)
* feat(api): add GET endpoint to look up clients by Telegram ID
GET /panel/api/clients/getByTgId/:tgId returns all clients matching the given Telegram user ID. tgId is not unique, so the response is an array of {client, inboundIds, externalLinks, usedTraffic} objects.
* fix: guard tgId=0 sentinel, index tg_id, deduplicate enrichment in getByTgId
Three issues from the code review on the new GET /panel/api/clients/getByTgId/:tgId
endpoint: the lookup did not short-circuit tgId <= 0 (this codebase's sentinel
for 'no Telegram ID'), had no index on clients.tg_id causing a full table scan
on every call, and duplicated the per-record enrichment (inbound IDs, external
links, effective flow, traffic) identically between get and getByTgId.
- Reject tgId <= 0 in GetRecordsByTgId with a clear error, matching the
'0 = none' convention used elsewhere in the codebase.
- Add index:idx_clients_tg_id to ClientRecord.TgID (struct tag + idempotent
startup migration for existing databases).
- Extract buildClientPayload helper used by both get and getByTgId.
- Update client_lookup_test.go to verify sentinel rejection instead of
expecting tgId=0 to be a valid lookup.
* refactor(api): move Telegram client lookup under /get/tgId/:tgId
Nest the Telegram-ID lookup beside the email lookup as /get/tgId/:tgId
instead of the flat /getByTgId/:tgId, so both client fetch routes share the
/get prefix. Gin resolves the static tgId segment ahead of the :email
wildcard, so /get/:email keeps matching plain email lookups, including a
literal 'tgId' email. The endpoint is unreleased, so no compatibility
concern.
2026-07-28 13:38:44 -07:00
|
|
|
results := make([]gin.H, 0, len(records))
|
|
|
|
|
for _, rec := range records {
|
|
|
|
|
payload, err := a.buildClientPayload(rec)
|
|
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "get"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
results = append(results, payload)
|
2026-06-12 00:06:35 -07:00
|
|
|
}
|
feat(api): add GET endpoint to look up clients by Telegram ID (#5945)
* feat(api): add GET endpoint to look up clients by Telegram ID
GET /panel/api/clients/getByTgId/:tgId returns all clients matching the given Telegram user ID. tgId is not unique, so the response is an array of {client, inboundIds, externalLinks, usedTraffic} objects.
* fix: guard tgId=0 sentinel, index tg_id, deduplicate enrichment in getByTgId
Three issues from the code review on the new GET /panel/api/clients/getByTgId/:tgId
endpoint: the lookup did not short-circuit tgId <= 0 (this codebase's sentinel
for 'no Telegram ID'), had no index on clients.tg_id causing a full table scan
on every call, and duplicated the per-record enrichment (inbound IDs, external
links, effective flow, traffic) identically between get and getByTgId.
- Reject tgId <= 0 in GetRecordsByTgId with a clear error, matching the
'0 = none' convention used elsewhere in the codebase.
- Add index:idx_clients_tg_id to ClientRecord.TgID (struct tag + idempotent
startup migration for existing databases).
- Extract buildClientPayload helper used by both get and getByTgId.
- Update client_lookup_test.go to verify sentinel rejection instead of
expecting tgId=0 to be a valid lookup.
* refactor(api): move Telegram client lookup under /get/tgId/:tgId
Nest the Telegram-ID lookup beside the email lookup as /get/tgId/:tgId
instead of the flat /getByTgId/:tgId, so both client fetch routes share the
/get prefix. Gin resolves the static tgId segment ahead of the :email
wildcard, so /get/:email keeps matching plain email lookups, including a
literal 'tgId' email. The endpoint is unreleased, so no compatibility
concern.
2026-07-28 13:38:44 -07:00
|
|
|
jsonObj(c, results, nil)
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) create(c *gin.Context) {
|
|
|
|
|
var payload service.ClientCreatePayload
|
|
|
|
|
if err := c.ShouldBindJSON(&payload); err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
needRestart, err := a.clientService.Create(&a.inboundService, &payload)
|
2026-09-03 16:01:20 -07:00
|
|
|
// Flagged before the error check: a partly-applied create leaves clients
|
|
|
|
|
// committed on the inbounds that succeeded, and those still need the restart.
|
|
|
|
|
if needRestart {
|
|
|
|
|
a.xrayService.SetToNeedRestart()
|
|
|
|
|
}
|
|
|
|
|
// A partly-applied call committed real clients; a rejected one touched
|
|
|
|
|
// nothing, and broadcasting those would refetch every panel for nothing.
|
|
|
|
|
if needRestart || err == nil {
|
|
|
|
|
notifyClientsChanged()
|
|
|
|
|
}
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
2026-06-04 17:26:57 -07:00
|
|
|
jsonMsgObj(c, I18nWeb(c, "pages.inbounds.toasts.inboundClientAddSuccess"), pendingNodeObj(a.inboundService.AnyNodePending(payload.InboundIds)), nil)
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) update(c *gin.Context) {
|
2026-11-05 09:02:39 -08:00
|
|
|
email, ok := clientEmailParam(c)
|
|
|
|
|
if !ok {
|
|
|
|
|
return
|
|
|
|
|
}
|
2026-08-15 07:50:20 -07:00
|
|
|
var req struct {
|
|
|
|
|
model.Client
|
|
|
|
|
LimitHwid int `json:"limitHwid"`
|
|
|
|
|
}
|
|
|
|
|
if err := c.ShouldBindJSON(&req); err != nil {
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
2026-06-04 07:45:40 -07:00
|
|
|
inboundFilter := parseInboundIdsQuery(c.Query("inboundIds"))
|
2026-08-15 07:50:20 -07:00
|
|
|
needRestart, err := a.clientService.UpdateByEmail(&a.inboundService, email, req.Client, req.LimitHwid, inboundFilter...)
|
fix(clients): flag the restart a partly-applied edit or delete still needs
63b46cd6 made a multi-inbound client op apply its inbounds concurrently and
stop aborting at the first failure, so an error can now come back together
with needRestart=true: the inbounds that succeeded committed real changes and
their Xray still needs the restart. That commit taught the two callers it
converted — create and attach — to read the flag before the error check.
d34ec97f then routed Update, Delete, Detach and DeleteByEmail's record-less
fallback through the same fanout but touched no caller, so on a master with
several nodes a partly-applied edit or delete returned (true, err) into a
handler that returned on err first. Xray was never flagged for the work that
landed and notifyClientsChanged never fired, so the running config kept
serving the pre-edit client set and every open panel showed stale rows until
something else happened to trigger a restart.
Read needRestart before the error check in update, delete and detach, and
broadcast on needRestart || err == nil — the same shape create and attach have
had since 63b46cd6. The predicate is a strict superset of the old err == nil,
and needRestart is only ever assigned after a runSerializedTx commit, so it
firing genuinely means something landed.
The three handlers are pinned by a new controller test each: one client on two
inbounds, the second one's settings JSON corrupted so the op commits on one and
fails on the other, asserting both the success:false response and the restart
flag. All three fail without the change.
The API docs for update, del and detach now describe the partial-application
contract, as add and attach already did. Detach ends at the fanout so every one
of its errors carries the inbound prefix; update and delete write the client
record afterwards, and a failure there is reported without one.
2026-09-06 16:51:01 -07:00
|
|
|
// Flagged before the error check: a partly-applied edit leaves the change
|
|
|
|
|
// committed on the inbounds that succeeded, and those still need the restart.
|
|
|
|
|
if needRestart {
|
|
|
|
|
a.xrayService.SetToNeedRestart()
|
|
|
|
|
}
|
|
|
|
|
// A partly-applied call committed real changes; a rejected one touched
|
|
|
|
|
// nothing, and broadcasting those would refetch every panel for nothing.
|
|
|
|
|
if needRestart || err == nil {
|
|
|
|
|
notifyClientsChanged()
|
|
|
|
|
}
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
2026-06-04 17:26:57 -07:00
|
|
|
jsonMsgObj(c, I18nWeb(c, "pages.inbounds.toasts.inboundClientUpdateSuccess"), pendingNodeObj(a.clientService.HasPendingNode(&a.inboundService, email)), nil)
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) delete(c *gin.Context) {
|
2026-11-05 09:02:39 -08:00
|
|
|
email, ok := clientEmailParam(c)
|
|
|
|
|
if !ok {
|
|
|
|
|
return
|
|
|
|
|
}
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
keepTraffic := c.Query("keepTraffic") == "1"
|
|
|
|
|
needRestart, err := a.clientService.DeleteByEmail(&a.inboundService, email, keepTraffic)
|
fix(clients): flag the restart a partly-applied edit or delete still needs
63b46cd6 made a multi-inbound client op apply its inbounds concurrently and
stop aborting at the first failure, so an error can now come back together
with needRestart=true: the inbounds that succeeded committed real changes and
their Xray still needs the restart. That commit taught the two callers it
converted — create and attach — to read the flag before the error check.
d34ec97f then routed Update, Delete, Detach and DeleteByEmail's record-less
fallback through the same fanout but touched no caller, so on a master with
several nodes a partly-applied edit or delete returned (true, err) into a
handler that returned on err first. Xray was never flagged for the work that
landed and notifyClientsChanged never fired, so the running config kept
serving the pre-edit client set and every open panel showed stale rows until
something else happened to trigger a restart.
Read needRestart before the error check in update, delete and detach, and
broadcast on needRestart || err == nil — the same shape create and attach have
had since 63b46cd6. The predicate is a strict superset of the old err == nil,
and needRestart is only ever assigned after a runSerializedTx commit, so it
firing genuinely means something landed.
The three handlers are pinned by a new controller test each: one client on two
inbounds, the second one's settings JSON corrupted so the op commits on one and
fails on the other, asserting both the success:false response and the restart
flag. All three fail without the change.
The API docs for update, del and detach now describe the partial-application
contract, as add and attach already did. Detach ends at the fanout so every one
of its errors carries the inbound prefix; update and delete write the client
record afterwards, and a failure there is reported without one.
2026-09-06 16:51:01 -07:00
|
|
|
// Flagged before the error check: a partly-applied delete already removed
|
|
|
|
|
// the client from the inbounds that succeeded, and those need the restart.
|
|
|
|
|
if needRestart {
|
|
|
|
|
a.xrayService.SetToNeedRestart()
|
|
|
|
|
}
|
|
|
|
|
// A partly-applied call committed real removals; a rejected one touched
|
|
|
|
|
// nothing, and broadcasting those would refetch every panel for nothing.
|
|
|
|
|
if needRestart || err == nil {
|
|
|
|
|
notifyClientsChanged()
|
|
|
|
|
}
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.inboundClientDeleteSuccess"), nil)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
type attachDetachBody struct {
|
|
|
|
|
InboundIds []int `json:"inboundIds"`
|
|
|
|
|
}
|
|
|
|
|
|
2026-06-14 11:57:14 -07:00
|
|
|
type externalLinksBody struct {
|
|
|
|
|
ExternalLinks []service.ExternalLinkInput `json:"externalLinks"`
|
|
|
|
|
}
|
|
|
|
|
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
func (a *ClientController) attach(c *gin.Context) {
|
|
|
|
|
email := c.Param("email")
|
|
|
|
|
var body attachDetachBody
|
|
|
|
|
if err := c.ShouldBindJSON(&body); err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
needRestart, err := a.clientService.AttachByEmail(&a.inboundService, email, body.InboundIds)
|
2026-09-03 16:01:20 -07:00
|
|
|
if needRestart {
|
|
|
|
|
a.xrayService.SetToNeedRestart()
|
|
|
|
|
}
|
|
|
|
|
// A partly-applied call committed real clients; a rejected one touched
|
|
|
|
|
// nothing, and broadcasting those would refetch every panel for nothing.
|
|
|
|
|
if needRestart || err == nil {
|
|
|
|
|
notifyClientsChanged()
|
|
|
|
|
}
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
2026-06-04 17:26:57 -07:00
|
|
|
jsonMsgObj(c, I18nWeb(c, "pages.inbounds.toasts.inboundClientAddSuccess"), pendingNodeObj(a.inboundService.AnyNodePending(body.InboundIds)), nil)
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
}
|
|
|
|
|
|
2026-06-14 11:57:14 -07:00
|
|
|
func (a *ClientController) setExternalLinks(c *gin.Context) {
|
|
|
|
|
email := c.Param("email")
|
|
|
|
|
var body externalLinksBody
|
|
|
|
|
if err := c.ShouldBindJSON(&body); err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
if err := a.clientService.SetExternalLinksByEmail(email, body.ExternalLinks); err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.inboundClientUpdateSuccess"), nil)
|
|
|
|
|
notifyClientsChanged()
|
|
|
|
|
}
|
|
|
|
|
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
func (a *ClientController) resetAllTraffics(c *gin.Context) {
|
|
|
|
|
needRestart, err := a.clientService.ResetAllTraffics()
|
|
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.resetAllClientTrafficSuccess"), nil)
|
|
|
|
|
if needRestart {
|
|
|
|
|
a.xrayService.SetToNeedRestart()
|
|
|
|
|
}
|
|
|
|
|
notifyClientsChanged()
|
|
|
|
|
}
|
|
|
|
|
|
2026-05-23 07:27:20 -07:00
|
|
|
type bulkAdjustRequest struct {
|
feat(clients): support setting HWID limit and MTProto ad-tag in bulk adjust (#6399)
* feat(clients): support setting HWID limit and MTProto ad-tag in bulk adjust
Add HWID device limit and Telegram MTProto sponsor channel (ad-tag)
support to the bulk client adjustment flow in both the panel API
and frontend ClientBulkAdjustModal.
Co-Authored-By: Claude Code <noreply@anthropic.com>
* fix(clients): gate adTag to MTProto inbounds and avoid inbound rewrite for limitHwid
Co-Authored-By: Claude Code <noreply@anthropic.com>
* fix(clients): stamp updated_at only on the clients a bulk adjust changed
The updated_at write was gated on hasInboundChanges, which accumulates
over the whole inbound instead of describing the client in hand. Once any
client in the settings array changed, every client after it was re-stamped
as well, so whether an untouched client kept its own updated_at depended on
its position in the array. That field feeds node-snapshot conflict
resolution, where a spurious bump lets a stale snapshot value win over the
stored record.
Track the change per client and fold it into the inbound-level flag where
the stamp is written, so the early return still skips a save whose settings
JSON would be unchanged.
Also condenses the BulkAdjust doc comment back to the two-line maximum.
* docs(api): regenerate the bulkAdjust reference for limitHwid and adTag
frontend/public/openapi.json was copied to docs/public/, but pnpm gen:api
was never re-run, so the API reference page's heading, anchor id and search
index still described bulkAdjust without limitHwid or adTag. docs-ci.yml
fires only on docs/**, and that path had been touched, so nothing flagged
the stale MDX.
The externalLinks hunks are the generator rewrapping lines main had left
stale, not a content change.
* fix(i18n): stop enumerating fields in the bulk-adjust empty-form message
bulkAdjustNothing listed the fields the form accepts, so it went stale
every time one was added: only en-US ever gained "flow", leaving the other
twelve locales describing days and traffic alone, and limitHwid and adTag
would have repeated that. Say that one field is required instead of naming
which, so the message cannot drift again.
2026-09-10 07:24:48 -07:00
|
|
|
Emails []string `json:"emails"`
|
|
|
|
|
AddDays int `json:"addDays"`
|
|
|
|
|
AddBytes int64 `json:"addBytes"`
|
|
|
|
|
Flow string `json:"flow"`
|
|
|
|
|
LimitHwid *int `json:"limitHwid"`
|
|
|
|
|
AdTag string `json:"adTag"`
|
2026-05-23 07:27:20 -07:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) bulkAdjust(c *gin.Context) {
|
|
|
|
|
var req bulkAdjustRequest
|
|
|
|
|
if err := c.ShouldBindJSON(&req); err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
feat(clients): support setting HWID limit and MTProto ad-tag in bulk adjust (#6399)
* feat(clients): support setting HWID limit and MTProto ad-tag in bulk adjust
Add HWID device limit and Telegram MTProto sponsor channel (ad-tag)
support to the bulk client adjustment flow in both the panel API
and frontend ClientBulkAdjustModal.
Co-Authored-By: Claude Code <noreply@anthropic.com>
* fix(clients): gate adTag to MTProto inbounds and avoid inbound rewrite for limitHwid
Co-Authored-By: Claude Code <noreply@anthropic.com>
* fix(clients): stamp updated_at only on the clients a bulk adjust changed
The updated_at write was gated on hasInboundChanges, which accumulates
over the whole inbound instead of describing the client in hand. Once any
client in the settings array changed, every client after it was re-stamped
as well, so whether an untouched client kept its own updated_at depended on
its position in the array. That field feeds node-snapshot conflict
resolution, where a spurious bump lets a stale snapshot value win over the
stored record.
Track the change per client and fold it into the inbound-level flag where
the stamp is written, so the early return still skips a save whose settings
JSON would be unchanged.
Also condenses the BulkAdjust doc comment back to the two-line maximum.
* docs(api): regenerate the bulkAdjust reference for limitHwid and adTag
frontend/public/openapi.json was copied to docs/public/, but pnpm gen:api
was never re-run, so the API reference page's heading, anchor id and search
index still described bulkAdjust without limitHwid or adTag. docs-ci.yml
fires only on docs/**, and that path had been touched, so nothing flagged
the stale MDX.
The externalLinks hunks are the generator rewrapping lines main had left
stale, not a content change.
* fix(i18n): stop enumerating fields in the bulk-adjust empty-form message
bulkAdjustNothing listed the fields the form accepts, so it went stale
every time one was added: only en-US ever gained "flow", leaving the other
twelve locales describing days and traffic alone, and limitHwid and adTag
would have repeated that. Say that one field is required instead of naming
which, so the message cannot drift again.
2026-09-10 07:24:48 -07:00
|
|
|
result, needRestart, err := a.clientService.BulkAdjust(&a.inboundService, req.Emails, req.AddDays, req.AddBytes, req.Flow, req.LimitHwid, req.AdTag)
|
2026-05-23 07:27:20 -07:00
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonObj(c, result, nil)
|
|
|
|
|
if needRestart {
|
|
|
|
|
a.xrayService.SetToNeedRestart()
|
|
|
|
|
}
|
|
|
|
|
notifyClientsChanged()
|
|
|
|
|
}
|
|
|
|
|
|
feat: complete Zod migration of frontend + bulk client batching (#4599)
* feat(frontend): add Zod runtime validation at API boundary
Introduces Zod 4 schemas for response validation on the three highest-traffic
endpoints (server/status, nodes/list, setting/all) and a Zod->AntD form rule
adapter, replacing the duplicated per-file ApiMsg<T> interfaces. Validation
runs safeParse with console.warn + raw-payload fallback so backend drift never
breaks the UI for users.
Login form switches to schema-driven rules as the proof-of-life for the
adapter. Class-based models stay untouched; remaining query/mutation hooks
and form modals will migrate in follow-ups.
* feat(frontend): extend Zod validation to remaining query/mutation hooks
Adds Zod schemas for client/inbound/xray/node-probe endpoints and wires
useNodeMutations, useClients, useInbounds, useXraySetting, useDatepicker
through parseMsg. Drops the duplicated per-file ApiMsg<T> interfaces and
the local ClientRecord / OutboundTrafficRow / XraySettingsValue / DefaultsPayload
declarations in favour of schema-inferred types re-exported from the
new src/schemas/ modules.
API boundary now validates: clients list/paged, clients onlines,
clients lastOnline, clients get/hydrate, inbounds slim, inbounds get,
inbounds options, defaultSettings, xray config, xray outbounds traffic,
xray testOutbound, xray getXrayResult, getDefaultJsonConfig, nodes probe,
nodes test. Mutation responses that consume obj (bulkAdjust, delDepleted,
nodes probe / test) get response validation; pass-through mutations stay
agnostic. NodeFormModal type-aligned to Msg<ProbeResult>.
* fix(frontend): allow null slices in client/summary schemas
Go's encoding/json emits nil []T as null, not []. The initial
ClientPageResponseSchema and ClientHydrateSchema rejected null
inboundIds / summary.online / summary.depleted / etc., causing
[zod] warnings on every empty list.
Add nullableStringArray / nullableNumberArray helpers that accept
null and transform to [] so consuming code keeps seeing arrays.
Mark ClientRecord.traffic and .reverse nullable too (reverse is
explicitly null in MarshalJSON when storage is empty).
* fix(vite): treat /panel/xray as SPA page, not API root
The dev-server bypass classified /panel/xray as an API path because
the PANEL_API_PREFIXES matcher did `stripped === prefix.replace(/\/$/, '')`,
which made the bare path collide with the SPA route of the same name
(see web/controller/xui.go: g.GET("/xray", a.panelSPA)).
On reload, /panel/xray got proxied to the Go backend instead of being
served by Vite. The backend returned the embedded built index.html
with hashed asset names that the dev server doesn't have, so every
asset 404'd.
Prefix-only match for trailing-slash entries fixes it: panel/xray/...
still routes to the API, but panel/xray itself reaches the SPA branch.
* feat(frontend): drive form validation from Zod schemas
NodeFormModal — full conversion to AntD Form.useForm with antdRule
on every required field. Inline field errors replace the single
'fillRequired' toast. testConnection now runs validateFields(['address','port'])
before sending.
ClientFormModal and ClientBulkAddModal — minimal conversion: keep the
existing useState-driven controlled-component pattern, but replace the
hand-rolled `if (!form.x)` checks with schema.safeParse(form). The
schema is the single source of truth for required-ness and types;
ClientCreateFormSchema layers on the create-only `inboundIds.min(1)` rule.
New schemas (in src/schemas/):
NodeFormSchema (node.ts)
ClientFormSchema / ClientCreateFormSchema (client.ts)
ClientBulkAddFormSchema (client.ts)
Other 16+ form modals stay on the current pattern — the antdRule adapter
ships from the first Zod pass for opportunistic migration as forms are
touched.
* chore(frontend): silence swagger-ui-react peer-dep warnings on React 19
swagger-ui-react@5.32.6 bundles three deps whose declared peer ranges
predate React 19:
react-copy-to-clipboard@5.1.0 (peer 15-18)
react-debounce-input@3.3.0 (peer 15-18, unmaintained)
react-inspector@6.0.2 (peer 16-18)
For the first two, the actual code is React-19 compatible - only the
metadata is stale. Resolve via npm overrides:
- react-copy-to-clipboard bumped to ^5.1.1 (peer is open-ended >=15.3.0
in that release).
- react-inspector bumped to ^9.0.0 (^8 was a broken publish per its own
deprecation notice).
- react-debounce-input is wedged on 3.3.0 with no maintained successor
on npm. Use the nested-override syntax to satisfy its react peer:
"react-debounce-input": { "react": "^19.0.0" }
That tells npm to use our React 19 for the package's peer dependency,
which silences the warning without changing the package version.
* fix(vite): bypass es-toolkit CJS shim for recharts deep imports
The Nodes page (and any other recharts-using route) crashed in dev and
prod with TypeError: require_isUnsafeProperty is not a function.
Root cause: es-toolkit's package.json exports './compat/*' only via a
default condition pointing at the CJS shims under compat/<name>.js.
Those shims use a require_X.Y access pattern that Vite's optimizer
(Rolldown in Vite 8) and the production Rolldown build both mishandle,
losing the named-export accessor and calling the namespace object as
a function. recharts imports a dozen of these subpaths with default-
import syntax, so every chart path tripped the bug.
The matching ESM build at dist/compat/<category>/<name>.mjs is fine,
but it only carries a named export. Recharts uses default imports.
Plug a small Rollup-compatible plugin (enforce: 'pre') in front of
the resolver: any 'es-toolkit/compat/<name>' request becomes a virtual
module that imports the named symbol from the right .mjs file and
re-exports it as both default and named. The plugin is registered as
a top-level plugin (for the prod build) and via the new Vite 8
optimizeDeps.rolldownOptions.plugins (for the dev pre-bundler), so
both pipelines pick it up consistently.
* feat(frontend): migrate five secondary form modals to Zod schemas
Apply the schema + safeParse-on-submit pattern (introduced for
ClientFormModal / ClientBulkAddModal) to five more forms:
- ClientBulkAdjustModal: ClientBulkAdjustFormSchema enforces 'at least
one of addDays / addGB is non-zero' via .refine(), replacing the
ad-hoc days+gb check.
- BalancerFormModal: BalancerFormSchema covers tag and selector
required-ness; the duplicate-tag check stays inline since it needs
the otherTags prop. Per-field validateStatus now reads from the
parsed issues map.
- RuleFormModal: RuleFormSchema captures the form shape (no required
fields - every property is optional by design). safeParse short-
circuits if anything is structurally wrong.
- CustomGeoFormModal: CustomGeoFormSchema folds the regex alias rule
and the http(s) URL validation (including URL parse) into the
schema, replacing a 20-line validate() function.
- TwoFactorModal: TotpCodeSchema (z.string().regex(/^\d{6}$/)) drives
both the disabled-state of the OK button and the safeParse gate
before the TOTP comparison.
Schemas live alongside the matching API schemas:
- ClientBulkAdjustFormSchema in schemas/client.ts
- BalancerFormSchema / RuleFormSchema / CustomGeoFormSchema in schemas/xray.ts
- TotpCodeSchema in schemas/login.ts (next to LoginFormSchema)
No UX change for valid inputs.
* feat(frontend): block invalid settings saves with Zod pre-save check
Tighten AllSettingSchema with the actual valid ranges and patterns:
- webPort / subPort / ldapPort: integer 1-65535
- pageSize: integer 1-1000
- sessionMaxAge: integer >= 1
- tgCpu: integer 0-100 (percentage)
- subUpdates: integer 1-168 (hours)
- expireDiff / trafficDiff / ldapDefault*: non-negative integers
- webBasePath / subPath / subJsonPath / subClashPath: must start with /
The existing useAllSettings save path runs AllSettingSchema.partial()
through safeParse and logs drift without blocking. SettingsPage now
adds a stronger gate before the mutation: run the full schema against
the draft and, on failure, surface the first issue (field path +
message) via the existing messageApi.error so the user actually sees
what's wrong instead of silently sending bad data to the backend.
Use cases caught: port out of range, negative quota, sub path missing
leading slash, page size set to 0, tgCpu > 100.
* feat(frontend): schema-guard Inbound and Outbound form submits
The two largest forms in the panel send to the backend without ever
checking their own port range or required-ness. Schema-gate the
top-level fields so obviously bad payloads stop at the client.
InboundFormModal: InboundFormSchema (port 1-65535 int, non-empty
protocol, the rest of the keys present) runs as a safeParse just
before the HttpUtil.post in submit(). The 2000+ lines of protocol-
specific subform code stay untouched - that's a separate effort and
the existing per-protocol logic (e.g. canEnableStream, isFallbackHost)
already gates most of the structural correctness.
OutboundFormModal: OutboundTagSchema (trim + min 1) replaces the
hand-rolled `if (!ob.tag?.trim()) messageApi.error('Tag is required')`
check. The duplicateTag check stays inline because it needs the
existingTags prop.
Both schemas emit i18n keys for messages with a defaultValue fallback,
matching the pattern in BalancerFormModal and SettingsPage.
* feat(backend): gate request bodies with go-playground/validator
Add a generic BindAndValidate helper in web/middleware that wraps gin's
content-aware binder with an explicit validator.Struct call and emits a
structured `entity.Msg{Obj: ValidationPayload{Issues...}}` on failure so
the frontend can map each issue to an i18n key.
Tag the user-facing fields on model.Inbound, model.Node, and
entity.AllSetting with the range/enum constraints they were previously
relying on hand-rolled CheckValid logic (or nothing) to enforce, and
wire the helper into the inbound/node/settings controllers that bind
those structs directly. Promotes validator/v10 from indirect to direct
require, plus six unit tests covering valid payloads, range violations,
enum violations, malformed JSON, in-place binding, and JSON-only strict
mode.
This is PR1 of a planned end-to-end Zod rollout — controllers using
local form structs (custom_geo, setEnable, fallbacks, client) keep
their existing handling and will be migrated as their schemas firm up.
* feat(codegen): Go-first tool emitting Zod schemas and TS types
Add tools/openapigen — a single-binary Go program that walks the
exported structs in database/model, web/entity, and xray via go/parser
and emits two committed artifacts under frontend/src/generated:
- zod.ts shared Zod schemas keyed off `validate:` tags (ports get
.min(1).max(65535), Inbound.protocol becomes a z.enum,
Node.scheme too, etc.)
- types.ts plain TS interfaces inferred from the same walk, so
consumers can import Inbound without dragging Zod along
The walker flattens embedded structs (AllSettingView.AllSetting),
honors json:"-" and omitempty, and accepts per-struct overrides so
the JSON-string-inside-JSON columns (Inbound.Settings/StreamSettings/
Sniffing, ClientRecord.Reverse, InboundClientIps.Ips) render as
z.unknown() instead of leaking the DB-storage type into the API
contract. Type aliases like model.Protocol are emitted as TS aliases
and Zod schemas in their own right.
Wires `npm run gen:zod` in frontend/package.json so the generator can
be re-run without leaving the frontend tree. The existing openapi.json
build (gen:api) is left alone for now; migrating the OpenAPI surface
to this generator is a follow-up.
PR2 of the planned Zod end-to-end rollout.
* refactor(frontend): tighten HttpUtil generics from any to unknown
Switch the class-level default on Msg<T> and the per-method defaults on
HttpUtil.get/post/postWithModal from `any` to `unknown`, so callers that
don't pass an explicit T get a narrowed response that must be schema-
checked or type-cast before its shape is trusted.
Drops the four file-level eslint-disable comments these defaults
required. Fixes the nine direct `.obj.field` consumers that surfaced
(IndexPage, XrayMetricsModal, NordModal, WarpModal, LogModal,
VersionModal, XrayLogModal, CustomGeoSection) by giving each call site
the explicit T it should have had from the start — typically a small
ad-hoc shape, sometimes a string for the JSON-text-in-Msg.obj pattern
used by NordModal/WarpModal/Xray nord/warp endpoints.
PR3 of the planned Zod end-to-end rollout — schemas/inbound.ts and
schemas/client.ts loose() removal stays parked until the protocol
schemas land in Phase 3 to avoid silently dropping fields.
* feat(frontend): protocol-leaf Zod schemas with discriminated unions
Stand up schemas/primitives (Port, Flow, Protocol, Sniffing) and per-protocol
leaf schemas for all 10 inbound and 13 outbound xray protocols. The leaves
omit any inner `protocol` literal — the discriminator lives at the parent
level so consumers narrow on `.protocol` without redundant projection. Wire
shape is preserved per protocol: vmess outbound stays in `vnext[]`, trojan
and shadowsocks outbound in `servers[]`, vless outbound flat, http/socks
outbound in `servers[].users[]`.
Cross-protocol atoms (port, flow, sniffing dest, protocol enum) live in
primitives. Protocol-specific enums (vmess security, ss method/network,
hysteria version, freedom domain strategy, dns rule action) stay with their
leaves. Tagged-wrapper `z.discriminatedUnion('protocol', [...])` composes
both InboundSettingsSchema and OutboundSettingsSchema; existing class-based
models in src/models/ are untouched and will be retired in Step 3 once the
golden-file safety net is in place.
* feat(frontend): stream and security Zod families with discriminated unions
Stand up the remaining Step 2 families. NetworkSettingsSchema is a
6-branch DU on `network` covering tcp/kcp/ws/grpc/httpupgrade/xhttp, with
asymmetric per-network wire keys (tcpSettings, wsSettings, ...) preserved
exactly so fixtures round-trip byte-identical. SecuritySettingsSchema is a
3-branch DU on `security` covering none/tls/reality. TLS certs use a
file-vs-inline union; uTLS fingerprints are shared between TLS and Reality
via a single primitive enum.
Hysteria-as-network, finalmask, and sockopt are not in the plan's Step 2
inventory and are deferred to Step 6 (Tighten) - they're orthogonal extras
on the stream root, not network-discriminated branches.
Resolves a Security identifier collision in protocols/index.ts by
re-exporting the type alias as SecurityKind (the `Security` name is taken
by the namespace re-export).
* test(frontend): vitest harness with golden-file fixtures for inbound protocols
Stand up Phase 3 safety net before the models/ rewrite. The harness loads
JSON fixtures via Vite's import.meta.glob, parses each through
InboundSettingsSchema (the tagged-wrapper DU), and snapshots the canonical
parsed shape. Snapshots stay byte-stable across the upcoming class-to-
pure-function extraction, catching any normalization drift.
Six representative inbound fixtures cover the high-traffic protocols:
vless, vmess, trojan, shadowsocks (2022-blake3 multi-user), wireguard,
hysteria2. Stream and security branches plus the remaining protocols
(http, mixed, tunnel, hysteria) follow in subsequent turns.
Uses /// <reference types="vite/client" /> instead of @types/node so we
avoid pulling in another type package; import.meta.glob is enough to walk
the fixtures directory at compile time.
Adds vitest 4.1.7 as the only new dev dependency. test/test:watch scripts
land in package.json; a standalone vitest.config.ts keeps the production
vite.config.js (which reads from sqlite via DatabaseSync) out of the test
runner.
* test(frontend): broaden golden coverage to remaining inbounds + stream + security DUs
Round out Step 3b. Four more inbound fixtures complete the protocol set
(http with two accounts, mixed with socks-style auth, tunnel with a port
map, hysteria v1). Two parallel test files cover the other DUs:
stream.test.ts walks tcp/ws/grpc fixtures through NetworkSettingsSchema,
and security.test.ts walks none/tls/reality through SecuritySettingsSchema.
Snapshot count is now 16 across three test files. The reality fixture
locks in the array form of serverNames/shortIds (the panel class stores
them comma-joined internally but they ship as arrays on the wire). The
TLS fixture pins the file-vs-inline cert DU on the file branch.
Stream coverage for httpupgrade/xhttp/kcp and security mixed-with-stream
combos follow in the next turn, alongside the shadow harness.
* test(frontend): shadow-parse harness asserting legacy class and Zod converge
Add Step 3c's safety net: for every inbound golden fixture, run the raw
payload through both pipelines —
legacy: Inbound.Settings.fromJson(protocol, raw.settings).toJson()
zod: InboundSettingsSchema.parse(raw).settings
— canonicalize each (recursively sort keys, drop empty arrays / null /
undefined), and assert byte-equality. This locks the wire shape across the
upcoming class-to-pure-function extraction in Step 3d. Any normalization
drift introduced by the rewrite trips an assertion here before it can
reach users.
Two ergonomic wrinkles handled inline:
- The legacy class lumps hysteria + hysteria2 onto a single
HysteriaSettings (no hysteria2 case in the dispatch table); the test
routes hysteria2 fixtures through the HYSTERIA branch.
- Empty arrays in Zod's output (e.g. fallbacks: [] from a .default([]))
are treated as equivalent to the legacy class's omit-when-empty
behavior. Same wire state, different syntactic surface.
All 26 tests across 4 test files pass on first run.
* refactor(frontend): extract toHeaders + toV2Headers to lib/xray/headers.ts
First Step 3d extraction. The XrayCommonClass static helpers
toHeaders/toV2Headers are pure data shape conversions with no class
hierarchy needs, so they move to a standalone module that callers can
import without dragging in models/inbound.ts. The new module exports
HeaderEntry + V2HeaderMap as named types so consumers stop reaching into
the legacy class for type shapes.
A new test file (headers.test.ts) asserts byte-equality with the legacy
XrayCommonClass.toHeaders / .toV2Headers across 18 cases — null /
undefined / primitive inputs, single-string headers, array-valued
headers, duplicate names, empty-name and empty-value filtering, both
arr=true (TCP request/response shape) and arr=false (WS / xHTTP / sockopt
shape). Drift between the legacy and new impls fails these tests, so the
follow-up call-site swap stays safe.
Callers (TcpStreamSettings, WsStreamSettings, HTTPUpgradeStreamSettings,
TunnelSettings, etc.) still go through XrayCommonClass for now — those
swaps land alongside class-method extractions in subsequent turns.
Suite is now 44 tests across 5 files; typecheck + lint clean.
* refactor(frontend): extract createDefault*Client factories to lib/xray
Next Step 3d slice. Five plain-object factories — Vless, Vmess, Trojan,
Shadowsocks, Hysteria — replace the legacy
`new Inbound.<Protocol>Settings.<Protocol>(...)` constructor chain and the
ClientBase XrayCommonClass machinery. Each factory takes an optional
seed; missing random fields (id, password, auth, email, subId) fall
through to RandomUtil at call time. Forms can hand-pick a UUID; tests
pass deterministic seeds so the suite never touches window.crypto.
Tests double-verify each factory: a snapshot locks the exact shape, and
the matching Zod ClientSchema.parse(out) must equal `out` — no missing
defaults, no stray fields, type-narrowed end-to-end.
Discovered: VmessClientSchema and VlessClientSchema enforce z.uuid()
format, so the test seeds use real-shape UUIDs.
Suite: 49 tests across 6 files; typecheck + lint clean. Outbound and
inbound-settings factories follow in subsequent turns alongside the
toShareLink extraction.
* refactor(frontend): add createDefault*InboundSettings factories for all 10 protocols
Round out Step 3d's settings factory set. Ten plain-object factories
(vless / vmess / trojan / shadowsocks / hysteria / hysteria2 / http /
mixed / tunnel / wireguard) replace the legacy
`new Inbound.<X>Settings(protocol)` constructors. Each returns a Zod-
parsable wire shape with schema defaults applied — no class instance.
Forms (Step 4) and InboundsPage clone (Step 5) call these factories
directly once the swap lands.
Three factories take a seed for random fields:
- shadowsocks: method-dependent password length via
RandomUtil.randomShadowsocksPassword(method)
- hysteria: explicit `version` override (defaults to 2, matching
the legacy panel constructor — v1 is opt-in)
- wireguard: secretKey from Wireguard.generateKeypair().privateKey
Tests double-verify each factory the same way as the client factories:
snapshot the shape, then Zod parse round-trip to confirm no missing
defaults or stray fields.
Suite: 59 tests across 6 files; typecheck + lint clean. Outbound
factories and the toShareLink extraction follow next.
* refactor(frontend): add getHeaderValue wire-shape lookup to lib/xray/headers
Tiny piece of the toShareLink scaffold. The legacy Inbound.getHeader(obj,
name) iterated the panel's internal HeaderEntry[] form; the new
getHeaderValue reads the Record<string, string|string[]> map our Zod
schemas store on the wire. Case-insensitive, returns '' on miss to match
the legacy fallback so link-generator call sites stay simple.
For repeated-name maps (TCP/WS-style string[] values) the first value
wins — matches the legacy iteration order so the share URL's Host hint
stays deterministic.
Five unit tests cover undefined/null/empty inputs, case folding,
string-valued and array-valued matches, empty-array edge case, and
missing-key fallback. Suite: 64 tests across 6 files; typecheck + lint
clean.
This unblocks the next slice: per-protocol link generators (genVmessLink
etc.) take a typed inbound + client and call getHeaderValue against the
ws/httpupgrade/xhttp/tcp.request header maps.
* feat(frontend): stream extras + full InboundSchema with DU intersection
Step 3d's last scaffolding piece before link generators. Three new
stream-extras schemas land alongside the network/security DUs:
- finalmask: TcpMask[] + UdpMask[] + QuicParams. Mask `settings` stays
record<string, unknown> for now — there are 13 UDP mask types and 3
TCP mask types with distinct per-type setting shapes, and modeling
them all as DUs would dwarf the rest of stream/ without buying
anything the shadow harness doesn't already catch. Tightened in
Step 6.
- sockopt: 17 socket-tuning knobs (TCP keepalive, TFO, mark, tproxy,
mptcp, dialer proxy, IPv6-only, congestion). `interfaceName` field
matches the panel class naming; serializers rename to `interface` on
the wire.
- external-proxy: rows ship per inbound describing edge fronts (CDN
mirrors). Used by link generators to fan out share URLs.
schemas/api/inbound.ts composes the top-level wire shape with
intersection-of-DUs:
StreamSettingsSchema = NetworkSettingsSchema
.and(SecuritySettingsSchema)
.and(StreamExtrasSchema)
InboundSchema = InboundCoreSchema.and(InboundSettingsSchema)
A fixture (vless-ws-tls.json) exercises the full shape — protocol DU,
network DU, security DU, and TLS cert file branch in one round trip.
The snapshot pins the canonical parsed form so the upcoming link
extractor consumes typed input with no class hierarchy underneath.
Suite: 65 tests across 7 files; typecheck + lint clean. Zod 4
intersection-of-DUs works.
* refactor(frontend): extract genVmessLink to lib/xray/inbound-link.ts
First link generator to leave the class hierarchy. genVmessLink takes a
typed Inbound + client args and returns the base64-encoded vmess://
URL. Internal helpers (buildXhttpExtra, applyXhttpExtraToObj,
applyFinalMaskToObj, applyExternalProxyTLSObj, serializeFinalMask,
hasShareableFinalMaskValue, externalProxyAlpn) port across from
XrayCommonClass — same logic, rewritten to read the Zod schemas'
Record<string, string> headers instead of the legacy HeaderEntry[].
Parity test (inbound-link.test.ts) loads each vmess fixture in
golden/fixtures/inbound-full, parses it with InboundSchema for the new
pure fn AND constructs LegacyInbound.fromJson(raw) for the class method,
then asserts the URLs match byte-for-byte. Drift between the two impls
fails here before the call sites in pages/inbounds/* get swapped.
Adds a small test setup file that aliases globalThis.window to globalThis
so Base64.encode's window.btoa works under Node — keeps the test env at
'node' and avoids pulling jsdom as a new dep.
A first vmess-tcp-tls full-inbound fixture pins the round-trip path.
Suite: 67 tests across 8 files; typecheck + lint clean. Five more link
generators (vless/trojan/ss/hysteria/wireguard) plus the orchestrator
(toShareLink, genAllLinks) follow in subsequent turns.
* test(frontend): refresh inbound-full snapshot with vmess-tcp-tls fixture
* refactor(frontend): extract genVlessLink to lib/xray/inbound-link
Second link generator. genVlessLink builds the
vless://<uuid>@<host>:<port>?<query>#<remark> share URL from a typed
Inbound + client args, dispatching on streamSettings.network for the
network-specific knobs and on streamSettings.security for the
TLS/Reality knobs. Three param-style helpers move alongside the obj-
style ones already in this file:
- applyXhttpExtraToParams — writes path/host/mode/x_padding_bytes and
the JSON extra blob into URLSearchParams
- applyFinalMaskToParams — writes the fm payload when shareable
- applyExternalProxyTLSParams — overrides sni/fp/alpn when an external
proxy entry is supplied and security is tls
A vless-tcp-reality fixture lands alongside the existing vless-ws-tls
one, so the parity test now exercises both security branches.
Discovered a latent legacy bug while writing parity: the old class
stored realitySettings.serverNames as a comma-joined string and gated
SNI on `!ObjectUtil.isArrEmpty(serverNames)`, which always returns true
for strings — so SNI was never written into Reality share URLs.
Existing clients rely on the omission (they pull SNI from
realitySettings.target instead). We preserve the omission here to keep
this extraction byte-stable; an inline comment marks the spot for a
separate intentional fix.
Suite: 70 tests across 8 files; typecheck + lint clean.
* refactor(frontend): extract genTrojanLink + genShadowsocksLink to lib/xray
Third and fourth link generators. genTrojanLink mirrors genVlessLink's
shape (URLSearchParams + network/security branches + remark hash) minus
the encryption/flow VLESS-isms. genShadowsocksLink shares the same query
construction but base64-encodes the userinfo portion as method:password
or method:settingsPw:clientPw depending on whether SS-2022 is in
single-user or multi-user mode.
Three reusable helpers move out of the per-protocol functions:
- writeNetworkParams: the per-network switch that all param-style
links share (tcp http header / kcp mtu+tti / ws path+host /
grpc serviceName+authority / httpupgrade / xhttp extras)
- writeTlsParams: fingerprint/alpn/ech/sni
- writeRealityParams: pbk/sid/spx/pqv (preserves the SNI-omission
legacy parity quirk noted in the genVlessLink commit)
genVmessLink stays with its inline switch — it builds a JSON obj instead
of URLSearchParams and has per-network quirks (kcp emits mtu+tti at
the obj root, grpc maps multiMode to obj.type='multi') that don't
factor cleanly through the shared writer.
Two new full-inbound fixtures (trojan-ws-tls, shadowsocks-tcp-2022)
plus matching parity tests bring the suite to 74 tests across 8 files;
typecheck + lint clean.
* refactor(frontend): extract genHysteriaLink + Wireguard link/config to lib/xray
Fifth and sixth link generators. genHysteriaLink builds the v1/v2
share URL (scheme picked from settings.version), copying TLS knobs into
the query, surfacing the salamander obfs password from
finalmask.udp[type=salamander] when present, and writing the broader
finalmask payload under `fm` like the other links.
Legacy parity note: the old genHysteriaLink read
stream.tls.settings.allowInsecure, which isn't a field on
TlsStreamSettings.Settings — the guard always evaluated false and the
`insecure` param never made it into the URL. We omit it here to stay
byte-stable.
genWireguardLink and genWireguardConfig take a typed
WireguardInboundSettings + peer index and:
- link: wireguard://<peerPriv>@host:port?publickey=&address=&mtu=#remark
- config: the .conf text WireGuard clients consume directly
Both derive the server pubKey from settings.secretKey via
Wireguard.generateKeypair at call time — Zod stores only secretKey on
the wire (pubKey is computed). The Wireguard utility is pure JS (X25519
over Float64Array), so it runs fine under node + the window polyfill we
added with the vmess extraction.
Two new full-inbound fixtures (hysteria-v1-tls, wireguard-server) plus
matching parity tests bring the suite to 78 tests across 8 files;
typecheck + lint clean.
Hysteria2 (protocol literal) parity stays deferred — the legacy
class has no HYSTERIA2 dispatch case, so it can't round-trip a
hysteria2 fixture without a protocol remap. Same trick the shadow
harness uses; revisit in the orchestrator commit.
* refactor(frontend): extract share-link orchestrator to lib/xray/inbound-link
Last slice of Step 3d. Five orchestrator exports compose the per-
protocol generators into the public surface the panel consumes:
- resolveAddr(inbound, hostOverride, fallbackHostname): picks the
address that goes into share/sub URLs. Browser `location.hostname`
is no longer a hidden dependency — callers pass it in (or any other
fallback they want).
- getInboundClients(inbound): protocol-aware clients accessor.
Mirrors the legacy `Inbound.clients` getter, including the SS
quirk where 2022-blake3-chacha20 single-user inbounds report null
(no client loop) and everything else returns the clients array.
- genLink: per-protocol dispatcher matching legacy Inbound.genLink.
- genAllLinks: per-client fanout. Builds the remarkModel-formatted
remark (separator + 'i'/'e'/'o' field picker) and iterates
streamSettings.externalProxy when present.
- genInboundLinks: top-level \r\n-joined link block. Loops per
client for clientful protocols, single-shots SS for non-multi-user,
and delegates to genWireguardConfigs for wireguard. Returns ''
for http/mixed/tunnel (no share URL at all).
Plus genWireguardLinks / genWireguardConfigs fanouts which iterate
peers and append index-suffixed remarks.
Parity test exercises every full-inbound fixture against legacy
Inbound.genInboundLinks. Skips hysteria2 (no legacy dispatch case;
that bridge belongs in a separate intentional commit alongside the
form modal swap). Suite: 89 tests across 8 files; typecheck + lint
clean.
Next: Step 4 form modal migrations. Forms can now drop
`new Inbound.Settings.getSettings(protocol)` in favor of the
createDefault*InboundSettings factories, and InboundsPage clone can
swap to genInboundLinks. Models/ deletion follows in Step 5 once all
call sites are off the class.
* refactor(frontend): swap InboundsPage clone fallback off Inbound.Settings.getSettings
First Step 4 call-site swap. createDefaultInboundSettings(protocol) lands
in lib/xray/inbound-defaults — a protocol-aware dispatch over the 10
per-protocol settings factories already in this module. Returns a Zod-
parsable plain object instead of a class instance, so callers that just
need the wire-shape JSON can drop the class hierarchy without touching
the broader form modals.
InboundsPage's clone path used Inbound.Settings.getSettings(p).toString()
as the fallback when settings JSON parsing failed. That's now
createDefaultInboundSettings + JSON.stringify, with a final '{}' guard
for unknown protocols (legacy returned null and .toString() crashed —
we just emit empty settings instead). The Inbound import on this file
is now unused and removed.
The 2 remaining getSettings call sites in InboundFormModal aren't safe
to swap in isolation — the form mutates the returned class instance
through methods like .addClient() and .toJson() across ~2000 lines of
JSX. Those land with the full Pattern A rewrite of InboundFormModal,
which the plan budgets at multiple days on its own.
Suite: 89 tests across 8 files; typecheck + lint clean.
* refactor(frontend): lift Protocols + TLS_FLOW_CONTROL consts to schemas/primitives
Step 4b. The Protocols and TLS_FLOW_CONTROL enums on models/inbound.ts
were dragging five page files into that 3,300-line module just to read
literal string constants. Lifting them to schemas/primitives lets those
pages drop the @/models/inbound import entirely.
- schemas/primitives/protocol.ts now exports a Protocols const map
alongside the existing ProtocolSchema. TUN stays in the const for
parity (legacy panel deployments may have saved TUN inbounds) even
though the Go validator no longer accepts it as a new write.
- schemas/primitives/flow.ts now exports TLS_FLOW_CONTROL. The
empty-string default isn't keyed because the legacy never had a
NONE entry — call sites compare against the two real flow values.
Updated five consumers:
- useInbounds.ts: TRACKED_PROTOCOLS now annotated readonly string[]
so .includes(string) keeps narrowing through the array literal
- QrCodeModal.tsx, InboundInfoModal.tsx: Protocols
- ClientFormModal.tsx, ClientBulkAddModal.tsx: TLS_FLOW_CONTROL
Suite: 89 tests across 8 files; typecheck + lint clean.
models/inbound.ts is now imported by:
- InboundFormModal.tsx (heavy use of Inbound class + getSettings)
- test/inbound-link.test.ts + test/shadow.test.ts + test/headers.test.ts
(intentional — these are parity tests against the legacy class)
OutboundFormModal still imports from models/outbound. Both form modals
are the multi-day Pattern A rewrites the plan scopes separately.
* refactor(frontend): lift OutboundProtocols + OutboundDomainStrategies to schemas/primitives
Moves the two outbound-side consts out of models/outbound.ts and into
schemas/primitives/outbound-protocol.ts. Renames the export to
OutboundProtocols to disambiguate from the inbound Protocols const
(different key casing — PascalCase vs ALL CAPS — and partly different
member set, so they cannot share a single const).
OutboundsTab.tsx keeps its 15+ Protocols.X call sites by aliasing
the import. FinalMaskForm.tsx and BasicsTab.tsx swap directly.
Drops a stale `as string[]` cast in BasicsTab that no longer fits
the new readonly-tuple typing.
After this commit only the two big form modals
(InboundFormModal/OutboundFormModal) plus three intentional parity
tests still import from @/models/.
* refactor(frontend): lift outbound option dictionaries to schemas/primitives
Adds schemas/primitives/options.ts with UTLS_FINGERPRINT, ALPN_OPTION,
SNIFFING_OPTION, USERS_SECURITY, MODE_OPTION (all identical between
models/inbound.ts and models/outbound.ts) plus the outbound-only
WireguardDomainStrategy, Address_Port_Strategy, and DNSRuleActions.
OutboundFormModal now pulls 9 consts from primitives. Only `Outbound`
(the class) and `SSMethods` (whose inbound/outbound versions diverge by
2 legacy aliases — keep the picker open for the Pattern A rewrite) still
come from @/models/outbound.
Drops three stale `as string[]` casts on what are now readonly tuples.
* refactor(frontend): swap InboundFormModal option dicts to schemas/primitives
Extends primitives/options.ts with the five inbound-only option dicts
(TLS_VERSION_OPTION, TLS_CIPHER_OPTION, USAGE_OPTION,
DOMAIN_STRATEGY_OPTION, TCP_CONGESTION_OPTION) and lifts InboundFormModal
off @/models/inbound for 10 of its 12 imports. Only the Inbound class
and SSMethods (inbound vs outbound versions diverge by 2 entries) still
come from @/models/.
Widens NODE_ELIGIBLE_PROTOCOLS Set element type to string since the new
primitives const exposes a narrow literal union that `.has(arbitraryString)`
would otherwise reject.
* feat(frontend): InboundFormValues schema for Pattern A rewrite
Foundation for the InboundFormModal rewrite. Mirrors the wire Inbound
shape (intersection of core fields + protocol settings DU + stream/security
DUs) plus the DB-side fields (up/down/total/trafficReset/nodeId/...) that
flow through DBInbound rather than the xray config slice.
InboundStreamFormSchema is exported separately so individual sub-form
sections can rule against just the stream portion when needed.
FallbackRowSchema is co-located here even though fallbacks save via a
distinct endpoint after the main POST — they belong to the same form
state from the user's perspective.
No modal changes in this commit. Foundation only; subsequent turns swap
the modal's `inboundRef`/`dbFormRef` mutable-class state for
Form.useForm<InboundFormValues>().
* feat(frontend): adapter between raw inbound rows and InboundFormValues
Adds lib/xray/inbound-form-adapter.ts with rawInboundToFormValues and
formValuesToWirePayload. The pair is the data boundary the upcoming
Pattern A modal will use: it consumes the DB row shape (settings et al.
as string OR object — coerced internally), hands the modal typed
InboundFormValues, and on submit reverses the trip to a wire payload
with the three JSON-stringified slices the Go endpoints expect.
No dependency on the legacy Inbound/DBInbound classes — the coerce step
is inlined so the adapter survives the eventual models/ deletion.
Adds 10 Vitest cases covering string vs object inputs, the optional
streamSettings/nodeId fields, trafficReset coercion, and a raw-to-payload
-to-raw round-trip equality.
* feat(frontend): protocol capability predicates as pure functions
Adds lib/xray/protocol-capabilities.ts with the seven predicates the
modals call: canEnableTls, canEnableReality, canEnableTlsFlow,
canEnableStream, canEnableVisionSeed, isSS2022, isSSMultiUser. Each
takes a minimal slice of an InboundFormValues, no class instance.
The legacy isSSMultiUser returns true on non-shadowsocks protocols too
(method getter resolves to "" which != blake3-chacha20-poly1305). The
new function preserves this quirk and documents it inline; callers all
narrow on protocol === shadowsocks before checking, so the surprising
return value never surfaces.
Parity harness in test/protocol-capabilities.test.ts crosses each of
the 10 golden fixtures with 14 stream configurations (network × security)
and asserts each predicate matches the legacy class method — 140 cases,
all green.
* feat(frontend): outbound settings factories + dispatcher
Adds lib/xray/outbound-defaults.ts parallel to inbound-defaults.ts:
13 createDefault*OutboundSettings factories (one per outbound protocol)
plus the createDefaultOutboundSettings(protocol) dispatcher mirroring
Outbound.Settings.getSettings's contract — non-null on each known
protocol, null otherwise.
The factory output matches the legacy `new Outbound.<X>Settings()` start
state: required-by-schema fields the user fills in via the form
(address, port, password, id, peer publicKey/endpoint) come back as
empty stubs. Wireguard alone seeds secretKey via the X25519 generator;
the rest expose blank fields. This is the same behavior the
OutboundFormModal relies on for protocol-change resets.
Shadowsocks defaults to 2022-blake3-aes-128-gcm rather than the legacy
undefined — the Select snaps to the first option anyway, so the
coherent default keeps the modal from rendering an empty picker.
Tests cover three layers:
- exact-shape snapshots per factory (13 cases)
- Zod schema acceptance after sensible stub fill-in (13 cases)
- dispatcher non-null per known protocol + null for the unknown (14 cases)
* feat(frontend): InboundFormModal.new.tsx skeleton (Pattern A)
First commit of the sibling-file modal rewrite. The new modal mounts
Form.useForm<InboundFormValues>, hydrates via rawInboundToFormValues on
open (edit) or buildAddModeValues (add), runs validateFields + safeParse
on submit, and posts the formValuesToWirePayload result. No tabs yet —
the modal body shows a WIP placeholder.
The file is not imported anywhere; the existing InboundFormModal.tsx
remains the one InboundsPage renders. Build, lint, and 280 tests stay
green. Subsequent commits add the basic / sniffing / protocol / stream /
security / advanced / fallbacks sections; the atomic import swap in
InboundsPage.tsx lands last.
* feat(frontend): basic tab on InboundFormModal.new.tsx (Pattern A)
First real section of the sibling-file rewrite. Wires AntD Form.Items
to InboundFormValues paths for the basic tab — enable, remark, deployTo
(when protocol is node-eligible), protocol, listen, port, totalGB,
trafficReset, expireDate.
The port input gets a per-field antdRule against
InboundFormBaseSchema.shape.port — the spec's Pattern A reference. The
intersection-typed InboundFormSchema has no .shape accessor, so per-field
rules pull from the underlying ZodObject components.
totalGB and expireDate are bytes/timestamp on the wire but a GB number /
dayjs picker in the UI. Both use shouldUpdate-closure children that read
form state and call setFieldValue on user input — no transient
form-only fields, no DU-shape surprises at submit time.
Protocol-change cascade lives in Form's onValuesChange: pick a new
protocol and the settings DU branch is reset to
createDefaultInboundSettings(next); a non-node-eligible protocol also
clears nodeId.
Modal still renders a single-tab Tabs container. Sniffing tab is next.
* feat(frontend): sniffing tab on InboundFormModal.new.tsx (Pattern A)
Second section of the sibling-file rewrite. Wires the six sniffing
sub-fields to nested form paths ['sniffing', 'enabled'], ['sniffing',
'destOverride'], etc. Uses Form.useWatch on the enabled flag to drive
conditional rendering of the dependent fields — the same gate the
legacy modal expressed via `ib.sniffing.enabled &&`.
Checkbox.Group renders one Checkbox per SNIFFING_OPTION entry. The two
exclusion lists use Select mode="tags" so the user can paste comma-
separated IP/CIDR or domain rules.
No transient form state, no class methods — every field maps directly
to a wire-shape path in InboundFormValues.
Protocol tab is next.
* feat(frontend): protocol tab VLESS auth on InboundFormModal.new.tsx
Adds the protocol tab to the sibling-file rewrite — currently only the
VLESS section, which lays out decryption/encryption inputs and the three
buttons that drive them: Get New x25519, Get New mlkem768, Clear.
getNewVlessEnc + clearVlessEnc are ported from the legacy modal as
pure setFieldValue paths into ['settings', 'decryption'] /
['settings', 'encryption'] — no class methods, no inboundRef. The
matchesVlessAuth helper mirrors the legacy fuzzy label-matching so the
backend response shape stays the only source of truth.
selectedVlessAuth derives the displayed auth label from the encryption
string via Form.useWatch — same heuristic as the legacy modal
(.length > 300 → mlkem768, otherwise x25519).
Tab spread is conditional: the protocol tab only appears when
protocol === 'vless' right now. As more protocol sections land
(shadowsocks, http/mixed, tunnel, tun, wireguard) the condition will
widen to cover each one.
* feat(frontend): protocol tab Shadowsocks section (Pattern A)
Adds the Shadowsocks sub-form: method picker (from SSMethodSchema's
seven schema-aligned options), conditional password input gated on
isSS2022, network picker (tcp/udp/tcp,udp), ivCheck toggle.
Method change cascades through the Select's onChange — regenerating
the inbound-level password via RandomUtil.randomShadowsocksPassword.
The shadowsockses[] multi-user list reset is deferred until the
clients-management section lands.
Uses isSS2022 from lib/xray/protocol-capabilities to gate the password
field exactly the way the legacy modal did — keeps the form behavior
identical without referencing the legacy class.
SSMethodSchema.options drives the Select rather than the legacy
SSMethods const (which the inbound modal pulled from models/inbound.ts).
This commits to the schema-aligned 7-entry list for inbound; the
outbound divergence (9 entries with legacy aliases) is still pending
in OutboundFormModal — defer the UX decision to that rewrite.
* feat(frontend): protocol tab HTTP and Mixed sections (Pattern A)
Adds the HTTP and Mixed sub-forms. Both share an accounts list — first
Form.List usage in the rewrite. Each row binds via [field.name, 'user']
/ [field.name, 'pass'] under the parent ['settings', 'accounts'] path,
so the wire shape stays exactly what HttpInboundSettingsSchema and
MixedInboundSettingsSchema validate.
HTTP-only: allowTransparent Switch.
Mixed-only: auth Select (noauth/password), udp Switch, conditional ip
Input gated on the udp value via Form.useWatch.
Tab visibility widens to include http + mixed alongside vless +
shadowsocks. The string cast on the includes-check keeps the frozen
Protocols const's narrow union from rejecting the broader protocol
string at the call site.
* feat(frontend): protocol tab Tunnel section (Pattern A)
Adds the Tunnel sub-form: rewriteAddress + rewritePort, allowedNetwork
picker (tcp/udp/tcp,udp), Form.List-driven portMap with name/value
pairs, and the followRedirect Switch.
portMap is the second Form.List in the rewrite — same shape as the
HTTP/Mixed accounts list but with name/value rather than user/pass.
The wire shape stays `settings.portMap: { name, value }[]` exactly.
Tab visibility widens to Tunnel.
* feat(frontend): protocol tab TUN section (Pattern A)
Adds the TUN sub-form: interface name, MTU, four primitive-array
Form.Lists (gateway, dns, autoSystemRoutingTable), userLevel,
autoOutboundsInterface.
Primitive Form.Lists bind each row's Input directly to `field.name`
(no inner key) — distinct from the object-row Form.Lists that bind to
`[field.name, 'fieldKey']`.
The Form.useWatch('protocol') return type comes from the schema's
protocol enum which excludes 'tun' (TUN is in the legacy Protocols
const for data parity but never accepted by the wire validator). Cast
to string at the source so per-section comparisons against
Protocols.TUN typecheck. Why: legacy DB rows with protocol === 'tun'
still need to render; widening here keeps reads from rejecting them.
Tab visibility widens to TUN.
* feat(frontend): protocol tab Wireguard section (Pattern A)
Adds the Wireguard sub-form: server secretKey input with regen icon,
derived disabled public-key display, mtu, noKernelTun toggle, and a
Form.List of peers — each peer having its own privateKey (regen icon),
publicKey, preSharedKey, allowedIPs (nested Form.List for the string
array), keepAlive.
pubKey is purely derived (computed via Wireguard.generateKeypair from
the watched secretKey) and is NOT stored in the form value — the schema
omits it from the wire shape on purpose. The disabled display shows the
live derivation without polluting form state.
regenInboundWg generates a fresh keypair and writes only the
secretKey path; pubKey re-derives automatically. regenWgPeerKeypair
writes both privateKey and publicKey at the peer's path index.
The preSharedKey wire-shape name is used instead of the legacy class's
internal psk — matches WireguardInboundPeerSchema.
Tab visibility widens to Wireguard.
* feat(frontend): stream tab skeleton with TCP + KCP (Pattern A)
Opens the stream tab on the sibling-file rewrite. Tab visibility is
driven by canEnableStream from lib/xray/protocol-capabilities — same
gate the legacy modal used, now schema-aware.
Transmission picker (network select) is hidden for HYSTERIA since
that protocol's network is implicit. onNetworkChange clears any stale
per-network settings keys (tcpSettings/kcpSettings/...) and seeds an
empty object for the new branch so AntD Form.Items don't read from
undefined nested paths.
TCP section: acceptProxyProtocol Switch (literal-true-optional on the
wire — the form stores true/false but Zod's strip behavior keeps
false-as-omission round-trips clean) plus an HTTP-camouflage toggle
that flips header.type between 'none' and 'http'. The full HTTP
camouflage request/response sub-form lands in a follow-up commit.
KCP section: six numeric knobs (mtu, tti, upCap, downCap,
cwndMultiplier, maxSendingWindow).
WS / gRPC / HTTPUpgrade / XHTTP / external-proxy / sockopt / hysteria
stream / FinalMaskForm hookup all still pending.
* feat(frontend): stream tab WS + gRPC + HTTPUpgrade sections (Pattern A)
Adds the three medium-complexity network branches to the stream tab.
Plain Form.Item paths into the corresponding *Settings keys — no
Form.List wrappers since these schemas don't have arrays at the top
level.
WS: acceptProxyProtocol, host, path, heartbeatPeriod
gRPC: serviceName, authority, multiMode
HTTPUpgrade: acceptProxyProtocol, host, path
Header editing is deferred to a later commit — WsHeaderMap is a
Record<string,string> on the wire, V2HeaderMap a Record<string,string[]>,
and the form needs an array-of-{name,value} UI that converts on edit.
Worth building once and reusing across WS, HTTPUpgrade, XHTTP, TCP
request/response, and Hysteria masquerade headers.
XHTTP + external-proxy + sockopt + hysteria stream + finalmask hookup
still pending.
* feat(frontend): stream tab XHTTP section (Pattern A)
XHTTP is the heaviest network branch — 19 fields rendered conditionally
on mode, xPaddingObfsMode, and the three *Placement selectors. Each
gates its dependent field set via Form.useWatch.
Field structure mirrors the legacy XHTTPStreamSettings form 1:1:
- mode picker (auto / packet-up / stream-up / stream-one)
- packet-up adds scMaxBufferedPosts + scMaxEachPostBytes; stream-up
adds scStreamUpServerSecs
- serverMaxHeaderBytes, xPaddingBytes, uplinkHTTPMethod (with the
packet-up gate on the GET option)
- xPaddingObfsMode unlocks xPadding{Key,Header,Placement,Method}
- sessionPlacement / seqPlacement each unlock their respective Key
field when set to anything other than 'path'
- packet-up mode additionally unlocks uplinkDataPlacement, and that
in turn unlocks uplinkDataKey when the placement is not 'body'
- noSSEHeader Switch at the tail
XHTTP headers editor still pending (same WsHeaderMap as WS — will be
unified in the header-editor extraction commit).
* feat(frontend): stream tab external-proxy + sockopt sections (Pattern A)
External Proxy: Switch driven by externalProxy array length. Toggling
on seeds one row with the window hostname + the inbound's current port;
toggling off clears the array. Each row is a Form.List item with
forceTls/dest/port/remark inline, and a nested SNI/Fingerprint/ALPN
row that conditionally renders on forceTls === 'tls' via a
shouldUpdate-closure that watches the per-row forceTls path.
Sockopt: Switch driven by whether the sockopt object exists in form
state. Toggling on calls SockoptStreamSettingsSchema.parse({}) so every
default the schema declares (mark=0, tproxy='off', domainStrategy='UseIP',
tcpcongestion='bbr', etc.) flows into the form; toggling off sets to
undefined.
Renders the seventeen sockopt fields directly bound to
['streamSettings', 'sockopt', X] paths. Option lists pull from the
primitives const dictionaries (UTLS_FINGERPRINT, ALPN_OPTION,
DOMAIN_STRATEGY_OPTION, TCP_CONGESTION_OPTION) rather than the
schema's .options to keep one source of truth for UI label strings.
* feat(frontend): security tab base + TLS section (Pattern A)
Adds the security tab to the sibling-file rewrite. Visibility is paired
with the stream tab — both gated on canEnableStream. The security
selector is itself disabled when canEnableTls is false, and the reality
option only appears when canEnableReality is true, mirroring the legacy
modal's Radio.Group guards.
onSecurityChange clears the previous branch's *Settings key and seeds
the new branch from the schema's parsed defaults (the same trick the
sockopt toggle uses). The security selector itself is rendered via a
shouldUpdate closure so the on-change handler can write the cleaned
streamSettings shape atomically without racing AntD's per-field sync.
TLS section: serverName (the wire field — the legacy class calls it
sni internally), cipherSuites (with the 13 named suites from
TLS_CIPHER_OPTION), min/max version pair, uTLS fingerprint, ALPN
multi-select, plus the three policy Switches.
TLS certificates list, ECH controls, the full Reality sub-form, and
the four API-call buttons (genRealityKeypair / genMldsa65 / getNewEchCert
/ randomizers) land in a follow-up commit.
* feat(frontend): security tab Reality + ECH + mldsa65 controls (Pattern A)
Adds the Reality sub-form and the four API-call buttons that drive
the server-generated material:
- genRealityKeypair calls /panel/api/server/getNewX25519Cert and writes
the result into ['streamSettings', 'realitySettings', 'privateKey']
and the nested settings.publicKey path.
- genMldsa65 calls /panel/api/server/getNewmldsa65 for the
post-quantum seed/verify pair.
- getNewEchCert calls /panel/api/server/getNewEchCert with the current
serverName and writes echServerKeys + settings.echConfigList.
- randomizeRealityTarget seeds target + serverNames from the random
reality-targets pool.
- randomizeShortIds calls RandomUtil.randomShortIds (comma-joined
string) and splits into the schema's string[] form.
Reality fields are bound directly to schema paths — show/xver/target,
maxTimediff, min/max ClientVer, the settings.{publicKey, fingerprint,
spiderX, mldsa65Verify} nested subtree, plus the array fields
(serverNames, shortIds) rendered as Select mode="tags" since both ship
as string[] on the wire.
TLS certificates list (Form.List with the useFile DU) still pending —
that's a chunky sub-form on its own.
* feat(frontend): security tab TLS certificates list (Pattern A)
Closes out the security tab: a Form.List of certificates that toggles
between TlsCertFileSchema (certificateFile + keyFile string paths) and
TlsCertInlineSchema (certificate + key as string arrays per the wire
shape) via a per-row useFile boolean.
useFile is a transient form-only field — not part of TlsCertSchema.
Zod's default-strip behavior drops it during InboundFormSchema parse
on submit, leaving only the matching wire branch's keys populated.
Whichever side the user wasn't on stays empty, so Zod's union picks
the populated branch.
For inline certs the TextAreas use normalize + getValueProps to convert
between the wire-side string[] and the multi-line text the user types.
Each line becomes one array element, matching the legacy class's
`cert.split('\n')` toJson convention.
Per-row buildChain is conditionally rendered when usage === 'issue' —
a shouldUpdate-closure watches the specific path so the toggle
re-renders inline without listening to unrelated form changes.
Security tab is now functionally complete. Advanced JSON tab,
Fallbacks card, and the atomic swap in InboundsPage are next.
* feat(frontend): advanced JSON tab on InboundFormModal.new.tsx (Pattern A)
Adds the advanced JSON tab. Each sub-tab (settings / streamSettings /
sniffing) renders an AdvancedSliceEditor — a small CodeMirror-backed
JsonEditor that holds a local text buffer and forwards parsed JSON to
form state on every valid edit.
Invalid JSON sits silently in the local buffer; once the user finishes
balancing braces / quoting, the next valid parse pushes through to the
form. No stamping ref, no apply-on-tab-switch ceremony — the form is
the single source of truth.
The buffer seeds once from form state on mount. The Modal's
destroyOnHidden means each open is a fresh editor instance, so external
form mutations during a single open session can't desync the editor
either.
The streamSettings sub-tab is omitted when streamEnabled is false
(matching the legacy modal's behavior for protocols like Http / Mixed
that have no stream layer).
* feat(frontend): fallbacks card on InboundFormModal.new.tsx (Pattern A)
Adds the fallbacks card rendered inside the protocol tab whenever the
current values describe a fallback host — VLESS or Trojan on tcp with
tls or reality security. The protocol tab visibility widens to include
Trojan in that exact case (it has no other protocol sub-form).
Fallbacks live in a useState alongside the form rather than inside form
values, mirroring the legacy modal: fallbacks save via a distinct
endpoint (/panel/api/inbounds/{id}/fallbacks) after the main inbound
POST, not as part of the inbound payload. loadFallbacks runs on open
for edit-mode VLESS/Trojan; saveFallbacks runs after a successful POST
inside the submit handler.
Each row: child picker (filtered down to other inbounds), then four
inline edits for SNI / ALPN / path / xver. Add adds an empty row;
delete pulls the row from state.
Quick-Add-All, the rederive-from-child helper, and the per-row up/down
movers are deferred — the basic add/edit/remove cycle is what the modal
actually needs to function.
* feat(frontend): atomic swap InboundFormModal to Pattern A
Deletes the 2261-line class-mutation modal and renames the
1900-line sibling rewrite into its place. InboundsPage.tsx already
imports the file by path so no consumer change is needed — the swap
is one file delete plus one file rename. Build, lint, and 280 tests
stay green.
What the new modal covers end-to-end:
- Basic (enable / remark / nodeId / protocol / listen / port /
totalGB / trafficReset / expireDate)
- Sniffing (enabled / destOverride / metadataOnly / routeOnly /
ipsExcluded / domainsExcluded)
- Protocol per DU branch: VLESS (decryption/encryption + buttons),
Shadowsocks (method/password/network/ivCheck), HTTP + Mixed
(accounts list + per-protocol toggles), Tunnel (rewrite + portMap +
followRedirect), TUN (interface/mtu + four primitive lists +
userLevel/autoInterface), Wireguard (secretKey + derived pubKey +
peers list with nested allowedIPs)
- Stream per network: TCP base, KCP, WS, gRPC, HTTPUpgrade, XHTTP
(the 22-field one), plus external-proxy and sockopt extras
- Security: TLS (SNI/cipher/version/uTLS/ALPN/policy switches +
certificates list with file/inline toggle + ECH controls), Reality
(every field + the four API-call buttons), none
- Advanced JSON (settings / streamSettings / sniffing live editors
that round-trip into form state on every valid parse)
- Fallbacks (load on open for VLESS/Trojan TLS-or-Reality TCP hosts;
save through the secondary endpoint after the main POST succeeds)
Known regressions vs the legacy modal, all reachable via Advanced JSON
until backfilled in follow-up commits:
- Hysteria stream sub-form (masquerade / udpIdleTimeout / version) —
schema gap; the existing inbound DU has no hysteria stream branch
- FinalMaskForm hookup — the component is still class-shape coupled
- HeaderMapEditor — TCP request/response headers, WS / HTTPUpgrade /
XHTTP headers, Hysteria masquerade headers all need a shared editor
- TCP HTTP camouflage request/response body (version, method, path
list, headers, status, reason) — only the on/off toggle is wired
- Fallbacks polish — up/down move, quick-add-all, rederive-from-child,
the per-row advanced-toggle / proxy-tag chips
No reference to @/models/inbound's Inbound class anywhere in the new
modal — only @/models/dbinbound (out of scope) and
@/models/reality-targets (out of scope). The protocol-capabilities
predicates and the rawInboundToFormValues + formValuesToWirePayload
adapters carry every behavior the class used to provide.
* fix(frontend): finish InboundFormModal rename after atomic swap
The atomic-swap commit landed the new file but the exported function was
still named InboundFormModalNew. Rename to match the file.
* feat(frontend): outbound form schema + wire adapter foundation
Lay the groundwork for OutboundFormModal's Pattern A rewrite:
- schemas/forms/outbound-form.ts: discriminated-union form values across
all 12 outbound protocols, with flat per-protocol settings shapes that
match the legacy class fields (vmess vnext / trojan-ss-socks-http
servers / wireguard csv address-reserved all flattened).
- lib/xray/outbound-form-adapter.ts: rawOutboundToFormValues converts
wire-shape outbound JSON to typed form values; formValuesToWirePayload
re-nests on submit. Replaces the Outbound.fromJson/toJson dependency
the modal currently has on the legacy class hierarchy.
- test/outbound-form-adapter.test.ts: 15 round-trip cases covering each
protocol's wire quirks (vmess vnext flatten, vless reverse-wrap,
wireguard csv↔array, blackhole response wrap, DNS rule normalization,
mux gating).
* feat(frontend): OutboundFormModal.new.tsx skeleton (Pattern A)
Sibling .new.tsx file with the Modal shell, Tabs (Basic/JSON), Form.useForm
hydration via rawOutboundToFormValues, and the submit pipeline that calls
formValuesToWirePayload before onConfirm. Tag uniqueness check is wired in.
Protocol-specific sub-forms, stream, security, sockopt, and mux sections
are deferred to subsequent commits — accessible via the JSON tab in the
meantime. The InboundsPage continues to render the legacy modal until the
atomic swap at the end.
Also: rawOutboundToFormValues now returns streamSettings as undefined
when the wire payload omits it, so Form.useForm doesn't receive a value
that does not match the NetworkSettings discriminated union.
* feat(frontend): OutboundFormModal.new.tsx vmess/vless/trojan/ss sections
- Shared connect-target sub-block (address + port) for the six protocols
whose form schema carries them flat at settings root.
- VMess: id + security Select (USERS_SECURITY).
- VLESS: id + encryption + flow + reverseTag (reverse-sniffing slice and
Vision testpre/testseed come in a later commit).
- Trojan: password.
- Shadowsocks: password + method Select (SSMethodSchema) + UoT switch +
UoT version.
onValuesChange cascade: when the user picks a different protocol, the
adapter re-seeds the settings sub-object to the new protocol's defaults
so leftover fields from the previous protocol do not bleed through.
* feat(frontend): OutboundFormModal.new.tsx socks/http/hysteria/loopback/blackhole/wireguard sections
- SOCKS / HTTP: user + pass at settings root.
- Hysteria: read-only version=2 (the actual transport knobs live on
stream.hysteria, added with the stream tab).
- Loopback: inboundTag.
- Blackhole: response type Select with empty/none/http options.
- Wireguard: address (csv) + secretKey (with regenerate icon) + derived
pubKey + domain strategy + MTU + workers + no-kernel-tun + reserved
(csv) + peers Form.List with nested allowedIPs sub-list.
Wireguard regenerate icon uses Wireguard.generateKeypair() and writes
both keys to the form via setFieldValue — preserves the legacy UX of
the SyncOutlined inline-icon next to the privateKey label.
* feat(frontend): OutboundFormModal.new.tsx DNS + Freedom + VLESS reverse-sniffing
- DNS: rewriteNetwork (udp/tcp Select) + rewriteAddress + rewritePort +
userLevel + rules Form.List (action/qtype/domain).
- Freedom: domainStrategy + redirect + Fragment Switch with conditional
4-field sub-block (legacy 'enable Fragment' UX preserved — Switch sets
all four fields to populated defaults, off-state empties them all out
so the adapter strips them on submit) + Noises Form.List (rand/base64/
str/hex types, packet/delay/applyTo per row) + Final Rules Form.List
with conditional block-delay sub-field.
- VLESS reverse-sniffing slice: rendered only when reverseTag is set
(matches the legacy modal's nested conditional). All six fields wired
to the form state with appropriate widgets (Switch / Select multi /
Select tags).
* feat(frontend): OutboundFormModal.new.tsx stream tab (TCP/KCP/WS/gRPC/HTTPUpgrade)
Wire the stream sub-form into the Pattern A modal:
- newStreamSlice(network) helper bootstraps the per-network DU branch
with Xray defaults (mtu=1350, tti=20, uplinkCapacity=5, etc.).
- streamSettings is seeded once when the protocol supports streams
but the form has no slice yet (new outbound + protocol switch).
- onNetworkChange swaps the sub-key and preserves security when the
new network still supports it, else snaps back to 'none'.
- Per-network sub-forms wired:
TCP: HTTP camouflage Switch (sets header.type = 'http' / 'none')
KCP: 6 numeric tuning fields
WS: host + path + heartbeat
gRPC: service name + authority + multi-mode switch
HTTPUpgrade: host + path
XHTTP: host + path + mode + padding bytes (advanced fields via JSON)
Security radio, TLS/Reality sub-forms, sockopt, and mux still pending.
* feat(frontend): OutboundFormModal.new.tsx security tab (TLS + Reality + Flow)
- onSecurityChange cascade: swaps tlsSettings/realitySettings sub-key
matching the DU branch, seeding the new sub-form with empty/default
fields so the UI does not reference undefined values.
- Flow Select rendered when canEnableTlsFlow is true (VLESS + TCP +
TLS/Reality). Moved from the basic VLESS section so it only appears
in the relevant security context — matches the legacy modal UX.
- Security Radio (none / TLS / Reality) gated by canEnableTls and
canEnableReality pure-function predicates from
lib/xray/protocol-capabilities.
- TLS sub-form: 6 outbound-specific fields (SNI/uTLS/ALPN/ECH/
verifyPeerCertByName/pinnedPeerCertSha256) matching the legacy
TlsStreamSettings flat shape (no certificates list — outbound is
client-side).
- Reality sub-form: 6 fields (SNI/uTLS/shortId/spiderX/publicKey/
mldsa65Verify). publicKey + mldsa65Verify get TextAreas to handle
the long base64 strings.
* feat(frontend): OutboundFormModal.new.tsx sockopt + mux sections
- Sockopts: Switch toggles streamSettings.sockopt between undefined and
a populated default object (17 fields with sane bbr/UseIP defaults).
Only the 8 most-used fields are rendered (dialer proxy, domain
strategy, keep alive interval, TFO, MPTCP, penetrate, mark, interface).
The remaining sockopt knobs (acceptProxyProtocol, tcpUserTimeout,
tcpcongestion, tcpKeepAliveIdle, tcpMaxSeg, tcpWindowClamp, V6Only,
trustedXForwardedFor, tproxy) are still in the wire payload — edit
them via the JSON tab.
- Mux: gated by isMuxAllowed(protocol, flow, network) — VMess/VLESS/
Trojan/SS/HTTP/SOCKS, no flow set, no xhttp transport. Sub-fields
(concurrency / xudpConcurrency / xudpProxyUDP443) only render when
enabled is true.
- Sockopt section visible only when streamAllowed AND network is set —
non-stream protocols (freedom/blackhole/dns/loopback) still edit
sockopt via the JSON tab.
* feat(frontend): atomic swap OutboundFormModal to Pattern A
Delete the legacy 1473-line class-based OutboundFormModal.tsx and replace
it with the new Pattern A modal (Form.useForm + antdRule + per-protocol
discriminated-union form values + wire adapter).
Net diff: legacy file gone, function renamed from OutboundFormModalNew
to OutboundFormModal so the existing OutboundsTab import resolves
unchanged.
What is migrated:
- All 12 protocols (vmess/vless/trojan/ss/socks/http/wireguard/
hysteria/freedom/blackhole/dns/loopback)
- Stream tab with TCP/KCP/WS/gRPC/HTTPUpgrade + partial XHTTP
- Security tab with TLS + Reality + Flow gating
- Sockopt + Mux sections (gated by isMuxAllowed)
- JSON tab with bidirectional bridge to form state
- Tag uniqueness check
- VLESS reverse-sniffing slice
- Freedom fragment/noises/finalRules
- DNS rewrite + rules list
- Wireguard peers + nested allowedIPs sub-list
- Wireguard secret/public key regeneration
Deferred to follow-up commits (still accessible via the JSON tab):
- XHTTP advanced fields (xmux, sequence/session placement, padding obfs)
- Hysteria stream transport sub-form
- TCP HTTP camouflage host/path body
- WS/HTTPUpgrade/XHTTP headers map editor
- Remaining sockopt knobs (tcpUserTimeout, tcpcongestion, tcpKeepAliveIdle,
tcpMaxSeg, tcpWindowClamp, V6Only, trustedXForwardedFor, tproxy,
acceptProxyProtocol)
- VLESS Vision testpre/testseed
- Reality API helpers (random target, x25519/mldsa65 generate-import)
- Link import (vmess:// vless:// etc → outbound)
- FinalMaskForm hookup (deferred from inbound rewrite too)
* test(frontend): convert legacy-class parity tests to snapshot baselines
With the inbound/outbound modal rewrites complete, the cross-check
against the legacy Inbound class has served its purpose. The new
pure-function / Zod-schema paths are the source of truth for production
code; the parity assertions were the migration safety net.
Convert the three parity test files to snapshot-based regression tests:
- headers.test.ts: toHeaders + toV2Headers run against snapshots
captured at the close of the migration (when both new and legacy
were verified byte-equal).
- protocol-capabilities.test.ts: 140 cases (10 fixtures × 14 stream
shapes) snapshot the predicate-result tuple. Was: parity vs legacy
Inbound.canEnableX() class methods.
- inbound-link.test.ts: per-protocol genXxxLink + genInboundLinks
orchestrator output is snapshotted. Was: byte-equality vs legacy
Inbound.genXxxLink() methods.
Also delete shadow.test.ts — its purpose was a dual-parse drift
detector (Inbound.Settings.fromJson vs InboundSettingsSchema.parse).
inbound-full.test.ts already snapshots the Zod parse output, which
covers the same ground without the legacy dependency.
models/inbound.ts and models/outbound.ts stay in the tree for now —
DBInbound still consumes Inbound via its toInbound() method, and
DBInbound migration is out of scope per the migration spec
('Do NOT migrate Status, DBInbound, or AllSetting...'). No
production page imports from @/models/inbound or @/models/outbound
directly anymore.
* chore(frontend): enforce no-explicit-any: error + add typecheck/test to CI
Step 7 of the Zod migration: lock the migration's gains in place via
lint + CI enforcement.
- eslint.config.js: `@typescript-eslint/no-explicit-any` set to error.
Verified locally — zero violations in src/, with the only file-level
disables being src/models/inbound.ts and src/models/outbound.ts
(kept for DBInbound's toInbound() consumer; their migration is out
of spec scope).
- .github/workflows/ci.yml: add Typecheck and Test steps to the
frontend job, between Lint and Build. PRs now have to pass
tsc --noEmit and the full vitest suite (285 tests + 172 snapshots)
before build runs.
Migration scoreboard (vs the spec):
Step 1 primitives + barrels done
Step 2 protocol leaf + DUs done
Step 3 pure-fn extraction done
Step 4 form modals -> Pattern A done (Inbound + Outbound)
Step 5 delete models/ files DEFERRED (DBInbound still uses
Inbound; spec marks DBInbound
migration out of scope)
Step 6 tighten .loose() / unknown DEFERRED (invasive, separate PR)
Step 7 lint + CI enforcement done (this commit)
Production code paths now have no direct dependency on the legacy
Inbound or Outbound classes.
* feat(frontend): OutboundFormModal deferred features (Vision seed / TCP host+path / WG pubKey derive)
Three small wins from the post-atomic-swap deferred list:
- VLESS Vision testpre + testseed: shown only when flow ===
'xtls-rprx-vision' (mirrors the legacy canEnableVisionSeed gate).
testseed binds to a Select mode='tags' with a normalize() that
coerces strings to positive integers and drops invalid entries.
- TCP HTTP camouflage host + path: when the TCP HTTP camouflage
Switch is on, surface two inputs that read/write directly into
streamSettings.tcpSettings.header.request.headers.Host and .path.
Both fields are string[] on the wire; normalize + getValueProps
translate to/from comma-joined strings in the UI (one entry per
host or path the user wants camouflaged).
- Wireguard pubKey auto-derive: Form.useWatch on settings.secretKey
+ useEffect that runs Wireguard.generateKeypair(secret).publicKey
on every change and writes the result into the disabled pubKey
display field. Matches the legacy modal's per-keystroke derive.
* feat(frontend): symmetric TCP HTTP host/path + extra sockopt knobs
OutboundFormModal:
- Sockopt section gains 5 common-but-rarely-tweaked knobs:
acceptProxyProtocol, tproxy (off/redirect/tproxy), tcpcongestion
(bbr/cubic/reno), V6Only, tcpUserTimeout. The remaining sockopt
fields (tcpKeepAliveIdle, tcpMaxSeg, tcpWindowClamp,
trustedXForwardedFor) are still edit-via-JSON; they are deeply
tunable and not commonly touched.
InboundFormModal:
- TCP HTTP camouflage gains host + path inputs symmetric to the
outbound side. Switch ON seeds request with sensible defaults
(version 1.1, method GET, path ['/'], empty headers). The two
inputs use the same normalize/getValueProps comma-string ↔
string[] dance the outbound side uses, so the wire shape stays
identical to what xray-core expects.
* feat(frontend): HeaderMapEditor reusable component + wire WS/HTTPUpgrade headers
Add a single reusable header-map editor that handles the two wire
shapes Xray uses:
- v1: { name: 'value' } — used by WS / HTTPUpgrade / Hysteria
masquerade. One value per name.
- v2: { name: ['value1', 'value2'] } — used by TCP HTTP camouflage.
Each header can repeat (RFC 7230 §3.2.2).
Internal state is always a flat list of {name, value} rows regardless
of mode; conversion to/from the wire shape happens at the value /
onChange boundary so consumers bind straight to a Form.Item with no
extra transforms.
Wired into:
- InboundFormModal: WS Headers, HTTPUpgrade Headers
- OutboundFormModal: WS Headers, HTTPUpgrade Headers
XHTTP headers are already in a list-of-rows wire shape (different
from these two), so they keep their bespoke editor. Hysteria
masquerade is still deferred until the Hysteria stream sub-form
lands.
* feat(frontend): Hysteria stream sub-form (schema branch + outbound UI)
Add the 7th branch to NetworkSettingsSchema for Hysteria transport.
schemas/protocols/stream/hysteria.ts:
- HysteriaStreamSettingsSchema covers the full wire shape: version=2,
auth, congestion (''|'brutal'), up/down bandwidth strings, optional
udphop sub-object for port-hopping, receive-window tuning fields,
maxIdleTimeout, keepAlivePeriod, disablePathMTUDiscovery.
schemas/protocols/stream/index.ts:
- NetworkSchema gains 'hysteria'.
- NetworkSettingsSchema gains the 7th branch
{ network: 'hysteria', hysteriaSettings: HysteriaStreamSettingsSchema }.
OutboundFormModal.tsx:
- NETWORK_OPTIONS keeps the 6 standard transports for non-hysteria
protocols; when protocol === 'hysteria', a 7th option is appended
(matches the legacy [...NETWORKS, 'hysteria'] gate).
- newStreamSlice handles the 'hysteria' case with sensible defaults
matching the legacy HysteriaStreamSettings constructor.
- New sub-form when network === 'hysteria': 8 common fields (auth,
congestion, up, down, udphop Switch + 3 nested fields when on,
maxIdleTimeout, keepAlivePeriod, disablePathMTUDiscovery).
- Receive-window tuning fields are still edit-via-JSON (rarely
touched + would clutter the form).
* feat(frontend): fallbacks polish — move up/down + Add all button
Two small UX wins on the InboundFormModal Fallbacks card:
- Per-row Move up / Move down buttons (ArrowUp/Down icons) that swap
adjacent indices. Order survives reloads via sortOrder (rebuilt from
index on save). First row's Up button + last row's Down button are
disabled.
- 'Add all' button next to 'Add fallback' that one-shot inserts a
fresh row for every eligible inbound (every option in
fallbackChildOptions) not already wired up. Disabled when every
eligible inbound is already covered. Convenient for operators
running catch-all routing across every host on the panel.
* feat(frontend): XHTTP advanced fields on outbound modal
Replace the 'edit via JSON' deferred-features hint with the full XHTTP
sub-form matching the legacy modal's XhttpFields helper.
schemas/protocols/stream/xhttp.ts:
- New XHttpXmuxSchema: 6 connection-multiplexing knobs
(maxConcurrency, maxConnections, cMaxReuseTimes, hMaxRequestTimes,
hMaxReusableSecs, hKeepAlivePeriod).
- XHttpStreamSettingsSchema gains 5 outbound-only fields and one
UI-only toggle: scMinPostsIntervalMs, uplinkChunkSize, noGRPCHeader,
xmux, enableXmux.
outbound-form-adapter.ts:
- New stripUiOnlyStreamFields() drops xhttpSettings.enableXmux on the
way to wire so the panel never embeds the UI toggle into the saved
config. xray-core ignores unknown fields anyway, but the panel reads
back its own emitted JSON, so a clean wire shape matters.
OutboundFormModal.tsx:
- Headers editor (HeaderMapEditor v1) for xhttpSettings.headers.
- Padding obfs Switch + 4 conditional fields (key/header/placement/
method) when on.
- Uplink HTTP method Select with GET disabled outside packet-up.
- Session placement + session key (key shown when placement != path).
- Sequence placement + sequence key (same pattern).
- packet-up mode: scMinPostsIntervalMs, scMaxEachPostBytes, uplink
data placement + key + chunk size (key/chunk-size shown when
placement != body).
- stream-up / stream-one mode: noGRPCHeader Switch.
- XMUX Switch + 6 nested fields when on.
* feat(frontend): inbound TCP HTTP camouflage response fields + request headers
Complete the TCP HTTP camouflage UI on the inbound side.
Already there from the previous symmetric host/path commit:
- Request host (string[] via comma-string)
- Request path (string[] via comma-string)
This commit adds:
- Request headers (V2 map: name -> string[]) via HeaderMapEditor.
- Response version (defaults to '1.1' when camouflage toggles on).
- Response status (defaults to '200').
- Response reason (defaults to 'OK').
- Response headers (V2 map) via HeaderMapEditor.
The HTTP camouflage Switch seeds both request and response sub-objects
on toggle-on so xray-core sees a valid TcpHeader.http shape from the
first save. Without the response seed, partial fills would emit a
schema-incomplete response block that xray-core might reject.
* feat(frontend): link import on outbound modal (vmess/vless/trojan/ss/hy2)
The legacy outbound modal could import a vmess://, vless://, trojan://,
ss://, or hysteria2:// share link via a Convert button on the JSON
tab. Restore that UX with a focused pure-function parser.
lib/xray/outbound-link-parser.ts:
- parseVmessLink: base64 JSON, maps net/tls + per-network params onto
the discriminated stream branch.
- parseVlessLink: standard URL with type/security/sni/pbk/sid/fp/flow
query params, dispatches transport via buildStream + applies
security params via applySecurityParams.
- parseTrojanLink: same URL pattern, defaults security to tls.
- parseShadowsocksLink: both modern (base64 userinfo@host:port) and
legacy (base64 of whole thing) ss:// formats.
- parseHysteria2Link: accepts both hysteria2:// and hy2:// schemes,
uses the hysteria stream branch with version=2 + TLS h3.
- parseOutboundLink dispatcher returns the first non-null parser
result, or null when no scheme matches.
test/outbound-link-parser.test.ts:
- 13 cases covering happy paths for each protocol family plus malformed
input, ss:// dual-format handling, hy2:// alias.
OutboundFormModal.tsx:
- Import button on the JSON tab Input.Search; on success, parsed
payload flows through rawOutboundToFormValues, the form is reset,
and we switch back to the Basic tab.
- Tag is preserved when the parsed link does not carry one.
Out of scope: advanced fields the legacy parser handled (xmux, padding
obfs, reality short IDs, finalmask from fm= param). Power users can
finish the import in the form after the basics land.
* feat(frontend): inbound Hysteria stream sub-form (auth + udpIdleTimeout + masquerade)
Restore the inbound side of Hysteria stream configuration that was
previously hidden — the legacy modal exposed these knobs but the
Pattern A rewrite gated them out.
schemas/protocols/stream/hysteria.ts:
- HysteriaMasqueradeSchema covers the inbound-only masquerade wire
shape: type ('proxy'|'file'|'string'), dir, url, rewriteHost,
insecure, content, headers, statusCode. The three masquerade types
cover the spectrum: reverse-proxy upstream, serve static files, or
return a fixed string body.
- HysteriaStreamSettingsSchema gains 3 inbound-side optional fields:
protocol, udpIdleTimeout, masquerade. Outbound side is untouched
(the legacy class accepted both wire shapes via the same struct).
InboundFormModal.tsx:
- New hysteria stream sub-form section in streamTab, gated by
protocol === HYSTERIA. Fields: version (disabled, locked to 2),
auth, udpIdleTimeout, masquerade Switch + nested type-Select with
three conditional sub-blocks (proxy URL+rewriteHost+insecure,
file dir, string statusCode+body+headers).
- onValuesChange cascade: switching TO hysteria seeds streamSettings
with the hysteria branch (forcing network='hysteria' + TLS); switching
AWAY from hysteria snaps back to TCP so the standard network
selector has a valid starting point.
masquerade headers use the HeaderMapEditor v1 component.
* feat(frontend): complete outbound sockopt section with remaining knobs
Add the four remaining SockoptStreamSettings fields that were
edit-via-JSON-only after the initial outbound modal rewrite:
- TCP keep-alive idle (s) — tcpKeepAliveIdle, time before sending
the first probe on an idle TCP connection.
- TCP max segment — tcpMaxSeg, override the default MSS.
- TCP window clamp — tcpWindowClamp, cap the TCP receive window.
- Trusted X-Forwarded-For — trustedXForwardedFor, list of trusted
proxy hostnames/CIDRs whose XFF headers Xray will honor.
The outbound sockopt section now exposes all 17 SockoptStreamSettings
fields from the schema. The InboundFormModal's sockopt section has
its own field list (closer to the legacy class) and is unchanged.
* feat(frontend): outbound TCP HTTP camouflage parity with inbound
Add method/version inputs, request header map, and full response
sub-section (version/status/reason/headers) to OutboundFormModal so the
outbound side can configure the same HTTP-1.1 obfuscation knobs the
inbound side already exposed.
* feat(frontend): round-trip XHTTP advanced fields in outbound link parser
Pick up xPaddingBytes, scMaxEachPostBytes, scMinPostsIntervalMs,
uplinkChunkSize, and noGRPCHeader from both vmess:// JSON and the URL
query-param parsers (vless/trojan). The advanced xmux/padding-obfs/
reality-shortId knobs still wait on a follow-up; this slice unblocks
the common case where a phone-issued xhttp link carries non-default
padding or post sizes.
* feat(frontend): round-trip XHTTP padding-obfs + remaining advanced knobs
Extract the XHTTP key-mapping into typed string/number/bool key arrays
applied by both the URL query-param branch and the vmess JSON branch.
The parser now covers xPaddingObfsMode + xPaddingKey/Header/Placement/
Method, sessionKey/seqKey/uplinkData{Placement,Key}, noSSEHeader,
scMaxBufferedPosts, scStreamUpServerSecs, serverMaxHeaderBytes, and
uplinkHTTPMethod alongside the previous five XHTTP fields. Two new
round-trip tests cover the padding-obfs surface on both link forms.
* feat(frontend): FinalMaskForm rewrite to Pattern A + wire into both modals
Rewrite FinalMaskForm.tsx from a class-coupled component (mutated
stream.finalmask.tcp[] via .addTcpMask/.delTcpMask methods, notified
parent via onChange callback) into a Pattern A sub-form: takes a
NamePath base, a FormInstance, and the surrounding network/protocol,
then composes Form.List + Form.Item at absolute paths under that base.
All array structures use nested Form.List — tcp/udp mask arrays, the
clients/servers groups in header-custom (Form.List of Form.List of
ItemEditor), and the noise list. Type Selects use onChange to reset
the settings sub-object via form.setFieldValue, mirroring the legacy
changeMaskType behavior. The kcp.mtu side effect on xdns type change
is preserved.
Wired into both InboundFormModal and OutboundFormModal stream tabs,
placed after the sockopt section. The component is the first Pattern A
consumer of nested Form.List inside another Form.List, so it stands
as the reference for future nested-array sub-forms.
* docs(frontend): record FinalMaskForm rewrite + hookup in status doc
Mainline migration goal — replace class-based xray models with Zod
schemas as the single source of truth + drive all forms through
AntD `Form.useForm` + `antdRule(schema.shape.X)` — is complete.
Remaining items are incremental polish.
* fix(frontend): Phase 2 Inbound form reactivity bugs (B1-B9, consolidated)
A run of resets dropped the per-bug commits 1401d833 / 5b1ae450 /
5bce0dc5 / 4007eec7. Re-landing all fixes against the same files in one
commit to avoid another rebase-style drop.
B1 — Transmission Select / External Proxy + Sockopt switches didn't
react after click. AntD 6.4.3 Form.useWatch on nested paths doesn't
re-fire reliably after `setFieldValue('streamSettings', cleaned)` on
the parent. Bound Transmission via `name={['streamSettings', 'network']}`
and wrapped the two switches in `<Form.Item shouldUpdate>` blocks that
read state via getFieldValue.
B2 — Security regressed from `Radio.Group buttonStyle="solid"` to a
Select dropdown, and disable state didn't refresh because tlsAllowed/
realityAllowed were derived at the top of the component. Restored
Radio.Button group and moved canEnableTls/canEnableReality evaluation
inside the shouldUpdate render prop.
B3 — Advanced tab "All" sub-tab was missing. Added it as the first
item with a new AdvancedAllEditor that round-trips top-level fields +
the three nested slices on edit.
B4 — Advanced tab title/subtitle and per-section help text were gone.
Wrapped the Tabs in the existing `.advanced-shell` / `.advanced-panel`
structure and restored the `.advanced-editor-meta` help under each
sub-tab using existing i18n keys.
B5 — TLS / Reality sub-forms didn't render when selecting tls or
reality on the Security tab. The `{security === 'tls' && ...}` and
`{security === 'reality' && ...}` conditionals used a stale top-level
useWatch value. Wrapped both in <Form.Item shouldUpdate> blocks that
read `security` via getFieldValue.
B6 — Advanced JSON editors stale after Stream/Sniffing changes. The
editors seeded text via lazy useState and AntD Tabs renders all panes
upfront, so the Advanced tab was already mounted with stale data.
Both AdvancedSliceEditor and AdvancedAllEditor now subscribe via
Form.useWatch and re-sync the text buffer when the watched JSON
differs from a lastEmitRef (the serialization at the moment of our
own last accepted write). User typing doesn't trigger re-sync because
setFieldValue updates lastEmitRef too. (A prior attempt added
`destroyOnHidden` to the outer Tabs but broke conditional tab items
when the unmounted Form.Item for `protocol` lost its value —
abandoned in favor of useWatch reactivity.)
B7 — HeaderMapEditor + button did nothing. addRow() appended a blank
{name:'', value:''} row, but commit() filtered it via rowsToMap before
reaching the form, so AntD saw no change and didn't re-render. The
editor now keeps a local rows state so blank rows survive during
editing; only filled rows are emitted to onChange.
B9 — Sniffing destOverride defaults (HTTP/TLS/QUIC/FAKEDNS) were not
pre-checked on a fresh Add Inbound. buildAddModeValues() seeded
sniffing: {} which left destOverride undefined. Now seeds with
SniffingSchema.parse({}) so the Zod defaults populate.
* fix(frontend): FinalMaskForm TCP Mask sub-forms + Advanced JSON wrap (B10/B11)
B10 — FinalMaskForm TCP Mask: after adding a mask and picking a Type
(Fragment/Header Custom/Sudoku), the type-specific sub-forms didn't
render. TcpMaskItem read `type` via Form.useWatch on a path inside
Form.List, which doesn't re-fire reliably in AntD 6.4.3 — same root
cause as the earlier B1/B2/B5 reactivity issues. Replaced with a
<Form.Item shouldUpdate> wrapper that reads `type` via getFieldValue
inside the render prop.
B11 — Advanced sub-tabs (settings / streamSettings / sniffing) showed
just the inner value (e.g. `{clients:[],decryption:"none",...}`), but
the legacy modal wrapped each slice with its key envelope (e.g.
`{settings:{...}}`) so the JSON matches the wire shape's slice and
round-trips cleanly from copy-pasted inbound configs. Added a
`wrapKey` prop to AdvancedSliceEditor that wraps/unwraps the value
on render/write; the three sub-tabs now pass settings / streamSettings
/ sniffing as their wrapKey.
* fix(frontend): import InboundFormModal.css so layout classes apply (B12)
The file InboundFormModal.css existed but was never imported, so every
class in it had no effect — including:
- .vless-auth-state — the "Selected: <auth>" caption next to the X25519/
ML-KEM/Clear button row stayed inline next to Clear instead of
display:block beneath the row
- .advanced-shell / .advanced-panel — the Advanced tab's header / panel
framing was missing
- .advanced-editor-meta — the per-section help text under each Advanced
sub-tab had no spacing
- .wg-peer — wireguard peer rows had no top margin
Add a side-effect import of the CSS file at the top of the modal. No
other change needed; the legacy modal must have either imported it or
had a global import that the new modal didn't inherit.
* fix(frontend): FinalMaskForm relative paths + network-switch defaults (B13/B14)
B13 — FinalMaskForm used absolute paths like
['streamSettings', 'finalmask', 'tcp', 0, 'type'] for Form.Item names
inside Form.List render props. AntD's Form.List prefixes Form.Item
names with the list's own name, so the actual storage path became
['streamSettings', 'finalmask', 'tcp', 'streamSettings', 'finalmask',
'tcp', 0, 'type'] — total nonsense. Symptoms: Type Select didn't show
the 'fragment' default after add(), and the sub-form for the picked
type never rendered (Fragment/Sudoku/HeaderCustom).
Rewrote FinalMaskForm to use RELATIVE names inside every Form.List
context (TCP/UDP outer list + nested clients/servers/noise inner
lists). Added a `listPath` prop on the items so the shouldUpdate
guard and the side-effect setFieldValue calls (resetting `settings`
when type changes) can still address the absolute path; the
displayed Form.Items use the relative form (`[fieldName, 'type']`).
Replaced top-level Form.useWatch on nested paths with
<Form.Item shouldUpdate> blocks reading via getFieldValue, same
pattern as the earlier B5 fix — Form.useWatch on paths inside
Form.List doesn't re-fire reliably in AntD 6.4.3.
B14 — Switching network (KCP, WS, gRPC, XHTTP, ...) seeded the
new XSettings blob as `{}` so every field showed as empty. The
legacy `newStreamSlice` populated mtu=1350, tti=20, etc. Restored
those defaults in onNetworkChange and seeded the initial
tcpSettings.header in buildAddModeValues so even the default TCP
state shows the HTTP-camouflage Switch in the correct off state
instead of an undefined header object.
* fix(frontend): inbound TCP HTTP camouflage drops request fields + KCP UI field rename (B15/B16)
B15 — Inbound TCP HTTP camouflage exposed Host / Path / Method / Version
/ request-headers inputs. Per Xray docs
(https://xtls.github.io/config/transports/raw.html#httpheaderobject),
the `request` object is honored only by outbound proxies; the inbound
listener reads `response`. Those inputs were writing dead data the
server ignored. Removed them from the inbound modal; only Response
{version, status, reason, headers} remain. The toggle still seeds an
empty request object so the wire shape stays valid against the schema.
B16 — KCP Uplink / Downlink inputs bound to non-existent form fields
`upCap` / `downCap`, while the schema (and wire) use `uplinkCapacity` /
`downlinkCapacity`. Renamed the Form.Items to the schema names so
defaults populate and saves persist. Also corrected newStreamSlice('kcp')
to seed the four KCP defaults (uplinkCapacity / downlinkCapacity /
cwndMultiplier / maxSendingWindow) — the missing two were why
"CWND Multiplier" and "Max Sending Window" still showed empty after
switching to KCP.
* fix(frontend): seed full Zod-schema defaults for stream slices + QUIC params (B17)
XHTTP showed blank Selects for Session Placement / Sequence Placement /
Padding Method / Uplink HTTP Method (and several other knobs). Those
fields have a literal "" (empty string) value in the schema, which the
Select renders as "Default (path)" / "Default (repeat-x)" / etc.
The form field was `undefined`, not `""`, so the Select showed blank
instead of the labelled default option.
newStreamSlice in InboundFormModal hand-rolled per-network seed
objects with only a handful of fields. Replaced with
{Tcp,Kcp,Ws,Grpc,HttpUpgrade,XHttp}StreamSettingsSchema.parse({}) so
every default declared in the schema populates the form on network
switch. Same change in buildAddModeValues for the initial TCP state.
QUIC Params (FinalMaskForm) had the same shape on a smaller scale —
defaultQuicParams() only seeded congestion + debug + udpHop. The
schema's other fields are .optional() (no Zod default) so a schema
parse won't help. Hard-coded the xray-core / hysteria recommended
values (maxIdleTimeout 30, keepAlivePeriod 10, brutalUp/Down 0,
maxIncomingStreams 1024, four window sizes) so the InputNumber
controls render with usable starting values instead of blank.
* fix(frontend): forceRender all tabs so fields register at modal open (B18)
AntD Tabs with the `items` API lazy-mounts inactive tab panes by
default. The Form.Items inside an unvisited tab never register, so:
- Form.useWatch on a parent path (e.g. 'sniffing') returns a partial
view containing only registered children. Until the user clicked the
Sniffing tab, Advanced > Sniffing JSON showed `{sniffing: {}}`
instead of the full default object set by setFieldsValue.
- After visiting the Sniffing tab once, the `sniffing.enabled` Form.Item
registered, so useWatch suddenly returned `{enabled: false}` — still
partial, because the rest of the sniffing children only register when
their Form.Items mount in conditional sub-sections.
Setting `forceRender: true` on every tab item forces all tab panes to
mount at modal open. Every Form.Item registers immediately; the watch
result reflects the full form value seeded by buildAddModeValues. This
also likely resolves the earlier "Invalid discriminator value" error
on submit, which surfaced when streamSettings had an unregistered
security field whose Form.Item hadn't mounted yet.
* refactor(frontend): align hysteria with new docs + drop hysteria2 protocol
Phase 2 smoke fixes on the Inbound add flow surfaced that hysteria2 was
modeled as a separate top-level protocol when it's really just hysteria
v2. The xray transports/hysteria.html docs also pin the hysteria stream
to a minimal shape (version/auth/udpIdleTimeout/masquerade) — the
previous schema carried legacy congestion/up/down/udphop/window knobs
that aren't part of the wire contract.
Hysteria2 removal:
- Drop 'hysteria2' from ProtocolSchema enum and Protocols const
- Drop hysteria2 branches from inbound/outbound discriminated unions
- Drop createDefaultHysteria2InboundSettings / OutboundSettings
- Delete schemas/protocols/inbound/hysteria2.ts and outbound/hysteria2.ts
- Drop hysteria2 case in getInboundClients / genLink (fell through to
the hysteria handler anyway)
- Update client form modals' MULTI_CLIENT_PROTOCOLS sets
- Remove hysteria2-basic fixture + snapshot entries (14 capability
cases, 1 protocols fixture, 1 inbound-defaults factory)
- Keep parseHysteria2Link() outbound parser since hysteria2:// is the
share-link URI prefix for hysteria v2
Hysteria stream alignment with xtls docs:
- HysteriaStreamSettingsSchema reduced to version/auth/udpIdleTimeout/
masquerade per transports/hysteria.html
- Masquerade type adds '' (default 404 page) and defaults to it
- Outbound form drops Congestion/Upload/Download/UDP hop/Max idle/
Keep alive/Disable Path MTU controls and the receive-window note
- newStreamSlice('hysteria') in OutboundFormModal mirrors the trimmed
shape; outbound-link-parser emits the trimmed shape too
- InboundFormModal Masquerade Select gains the default option
New TUN inbound schema:
- Add schemas/protocols/inbound/tun.ts with name/mtu/gateway/dns/
userLevel/autoSystemRoutingTable/autoOutboundsInterface
- Wire into ProtocolSchema enum, InboundSettingsSchema discriminated
union, createDefaultInboundSettings dispatcher
Other Phase 2 smoke fixes folded in:
- Tunnel portMap UI swaps Form.List for HeaderMapEditor v1 — wire
shape is Record<string,string> and the List was producing arrays
- Hysteria onValuesChange seeds full TLS schema defaults + one
empty certificate row (Cipher Suites/Min/Max Version/uTLS/ALPN
were undefined before)
- HTTP/Mixed accounts Add button auto-fills user/pass with
RandomUtil.randomLowerAndNum
- Hysteria security tab gates the 'none' radio out — TLS only
- Hysteria stream tab drops the inbound Auth password field (xray
inbound auth is per-user via 'users', not stream-level)
- Reality onSecurityChange auto-randomizes target/serverNames/
shortIds and fetches an X25519 keypair
- Tag and DB-side fields (up/down/total/expiryTime/
lastTrafficResetTime/clientStats/security) gain hidden Form.Items
so validateFields keeps them in the wire payload (rc-component
form strips unregistered fields)
- WireGuard inbound auto-seeds one peer with generated keypair,
allowedIPs ['10.0.0.2/32'], keepAlive 0 — matches legacy
- WireGuard peer rows separated by Divider with the Peer N title
and a small inline remove button (titlePlacement="center")
* refactor(frontend): retire class-based xray models (Step 5)
Delete models/inbound.ts (3,359 lines) and outbound.ts (2,405).
The Inbound/Outbound classes and ~50 sub-classes are replaced by
Zod-typed data + pure functions in lib/xray/*.
Consumer migration off dbInbound.toInbound():
- useInbounds: isSSMultiUser({protocol, settings}) directly
- QrCodeModal: genWireguardConfigs/Links/AllLinks from lib/xray
- InboundList: derives tags from streamSettings raw fields
- InboundsPage: clone via raw JSON, fallback projection via
schema-shape stream object, exports via genInboundLinks
- InboundInfoModal: builds an InboundInfo facade locally from
raw streamSettings (host/path/serverName/serviceName per
network), canEnableTlsFlow + isSS2022 from lib/xray
New helper: lib/xray/inbound-from-db.ts exposes
inboundFromDb(raw) converting a raw DBInbound row into a
schema-typed Inbound for the link-generation orchestrators.
DBInbound trimmed: drops toInbound, isMultiUser, hasLink,
genInboundLinks, _cachedInbound. Imports Protocols from
@/schemas/primitives now that ./inbound is gone.
Bundled Phase 2 fixes:
- Outbound modal: Form.useWatch with preserve: true so the
stream block doesn't gate itself out when network is unmounted
- Inbound form adapter: pruneEmpty preserves empty objects;
per-protocol client field projection via Zod safeParse;
sniffing collapse to {enabled:false}
- useClients invalidateAll also invalidates inbounds.root()
- IndexPage Config modal top/maxHeight polish
Tests: 283/283 pass. typecheck/lint clean.
* fix(frontend): inboundFromDb fills Zod defaults for stream + settings
Smoke-testing the new inboundFromDb helper surfaced two regressions
that the strict lib/xray link generators expose when fed raw DB
streamSettings without per-network sub-keys.
1. genVlessLink / genTrojanLink crash on `stream.tcpSettings.header`
when streamSettings lacks `tcpSettings` (true for slim list rows
and for handcrafted minimal-JSON inbounds). The legacy
Inbound.fromJson chain populated TcpStreamSettings via its own
constructor; the new helper now does the same by parsing the raw
<network>Settings sub-object through the matching Zod schema and
merging schema defaults onto whatever the DB stored.
2. genVlessLink writes `encryption=undefined` into the share URL
when settings lacks the `encryption: 'none'` literal that vless
wire JSON normally carries. Fixed by running raw settings through
InboundSettingsSchema.safeParse() to populate per-protocol
defaults (encryption, decryption, fallbacks, etc.) the same way
the legacy class fromJson chain did.
Same pattern applied to security branch (tls/realitySettings).
Tests: src/test/inbound-from-db.test.ts covers
- JSON-string / object / empty settings coercion
- genInboundLinks vless (TCP/none, with encryption=none)
- genWireguardConfigs + genWireguardLinks peer fanout
- genAllLinks trojan with TLS sub-defaults applied
- protocol-capability helpers with raw shapes
- getInboundClients across vless/SS-single/non-client protocols
296/296 pass.
* fix(frontend): QUIC udpHop.interval is a range string, not a number (B19)
User report: "streamSettings.finalmask.quicParams.udpHop.interval:
Invalid input: expected string, received number".
Three-part fix:
- FinalMaskForm: Hop Interval input changed from InputNumber to
Input with "e.g. 5-10" placeholder. xray-core spec says interval
is a range string like '5-10' (seconds between min-max hops),
not a single number.
- FinalMaskForm: defaultQuicParams() seeds interval: '5-10' instead
of the broken `interval: 5`.
- QuicUdpHopSchema: preprocess coerces number → string for legacy
DB rows that were written by the now-fixed buggy UI. Stops the
load-time validation crash on existing inbounds.
Tests still 296/296.
* fix(frontend): outbound link parser handles extra/fm/x_padding_bytes (B20)
User-reported vless share link with full xhttp + reality + finalmask
config failed to round-trip on outbound import. The inbound link
generator emits three payloads the outbound parser was ignoring:
1. `extra=<json>` — bundles advanced xhttp knobs (xPaddingBytes,
scMaxEachPostBytes, scMinPostsIntervalMs, padding-obfs keys,
etc.). applyXhttpStringFromParams now JSON.parses this and
merges the fields into xhttpSettings via the same JSON-branch
logic used by vmess.
2. `x_padding_bytes=<range>` — snake_case alias the inbound emits
alongside the camelCase form. Now applied before camelCase so
explicit `xPaddingBytes` URL params still win.
3. `fm=<json>` — full finalmask object including quicParams.udpHop
and tcp/udp mask arrays. New applyFinalMaskParam attaches the
decoded object to streamSettings.finalmask. Wired into both
parseVlessLink and parseTrojanLink.
Tests:
- Real B20 link parses with xhttp + reality + finalmask all populated
- Precedence: camelCase URL > extra JSON > snake_case alias > default
- Malformed extra JSON falls through without crashing the parser
300/300 pass.
* fix(frontend): Outbound submit crash on non-mux protocols + tab a11y (B21)
Two issues surfaced on Outbound save:
1. Crash: `Cannot read properties of undefined (reading 'enabled')` at
formValuesToWirePayload. The modal hides the Mux switch entirely
for non-stream protocols (dns/freedom/blackhole/loopback) and for
stream protocols when isMuxAllowed gates it out (xhttp, vless+flow).
With the field never registered, validateFields() returns no `mux`
key — `values.mux.enabled` then dereferences undefined.
Fix: optional chain `values.mux?.enabled` so missing mux skips the
mux clause silently. Documented why mux can be absent.
2. Chrome a11y warning: "Blocked aria-hidden on an element because its
descendant retained focus" — when the user has an input focused
inside one Tab panel and switches to another tab, AntD marks the
outgoing panel aria-hidden while focus is still inside. The browser
warns, but the focused control is now invisible to AT users.
Fix: blur the active element before setActiveKey in onTabChange.
* fix(frontend): blur active element on every tab switch path (B21 follow-up)
The previous B21 patch only blurred on user-initiated tab clicks via
onTabChange. Two other paths still set activeKey while a JSON-tab
input retained focus:
- importLink: after a successful share-link parse, setActiveKey('1')
switched to the form tab while the user's focus was still on the
Input.Search they just pressed Enter in. Chrome logged the same
"Blocked aria-hidden" warning because the panel they were leaving
became aria-hidden synchronously, with their input still focused.
- onTabChange entering the JSON tab: also did a bare setActiveKey
with no blur, so going from a focused form input INTO the JSON
tab could trip the warning in reverse.
Fix: centralized switchTab(key) that blurs document.activeElement
sync before calling setActiveKey. Every internal tab transition
(importLink, onTabChange both directions) now routes through it.
The single setActiveKey('1') in the open-modal useEffect is left as
a plain setter because there's no focused input at modal-open time.
* refactor(frontend): extract fillStreamDefaults to shared helper
Move the network/security schema-default filler out of inbound-from-db.ts
into stream-defaults.ts so other consumers can reuse it without dragging
in the DBInbound-specific code path.
* fix(frontend): derive QUIC/UDP-hop switch state from data presence (B22)
The QUIC Params and UDP Hop toggles previously persisted as separate
boolean flags (enableQuicParams / hasUdpHop) which weren't part of the
xray wire format and weren't restored when a config was pasted into the
modal. Use data presence as the single source of truth: the switch is
on iff the corresponding sub-object exists. Switching off clears it
back to undefined.
* fix(frontend): xhttp form binding + drop empty strings from JSON (B23)
uplinkHTTPMethod was wrapped Form.Item -> Form.Item(shouldUpdate) ->
Select, which broke AntD's value/onChange injection (AntD only clones
the immediate child). Restructured so shouldUpdate is the outer wrapper
and Form.Item(name) directly wraps the Select.
Also drop empty-string fields from xhttpSettings in the wire payload —
fields like uplinkHTTPMethod, sessionPlacement, seqPlacement,
xPaddingKey default to '' meaning "use server default", so they
shouldn't appear in JSON as "field": "".
Adds placeholder text to the 3 xhttp Selects so the form reflects the
current value after JSON paste.
* feat(frontend): align finalmask + sockopt with xray docs, add golden fixtures
Schema fixes per https://xtls.github.io/config/transports/finalmask.html
and https://xtls.github.io/config/transports/sockopt.html:
finalmask:
- QuicCongestionSchema: remove non-doc 'cubic', keep reno/bbr/brutal/force-brutal
- Add BbrProfileSchema (conservative/standard/aggressive) and bbrProfile field
- brutalUp/brutalDown: number -> string per docs (units like '60 mbps')
- Tighten ranges: maxIdleTimeout 4-120, keepAlivePeriod 2-60, maxIncomingStreams min 8
- UdpMaskTypeSchema: add missing 'sudoku'
- udpHop.interval stays as preprocessed string-range per intentional B19 divergence
sockopt:
- tcpFastOpen: boolean -> union(boolean, number) per docs (number tunes queue size)
- mark: drop min(0) (can be any int)
- domainStrategy default: 'UseIP' -> 'AsIs' per docs
- tcpKeepAlive Interval/Idle defaults: 0/300 -> 45/45 per docs (outbound)
- Add AddressPortStrategySchema enum (7 values) + addressPortStrategy field
- Add HappyEyeballsSchema (tryDelayMs/prioritizeIPv6/interleave/maxConcurrentTry)
- Add CustomSockoptSchema (system/type/level/opt/value) + customSockopt array
Bug fixes:
- options.ts: Address_Port_Strategy values were lowercase ('srvportonly');
xray-core requires camelCase ('SrvPortOnly'). Fixed all 6 entries.
- OutboundFormModal: domainStrategy Select was mistakenly populated from
ADDRESS_PORT_STRATEGY_OPTIONS; now uses DOMAIN_STRATEGY_OPTION.
- OutboundFormModal: inline sockopt defaults (hardcoded {acceptProxyProtocol:
false, domainStrategy: 'UseIP', ...}) replaced with
SockoptStreamSettingsSchema.parse({}) so schema is the single source.
Form additions (both InboundFormModal + OutboundFormModal):
- Address+port strategy Select
- Happy Eyeballs Switch + sub-form (tryDelayMs/prioritizeIPv6/interleave/maxConcurrentTry)
- Custom sockopt Form.List (system/type/level/opt/value)
- FinalMaskForm: BBR Profile Select (visible when congestion='bbr'),
Brutal Up/Down placeholders updated to string format
Golden fixtures (8 new + 4 xhttp extras):
- finalmask/{tcp-mask, udp-mask, quic-params, combined}.json — cover all TCP
mask types, 7 UDP mask types including new sudoku, full QUIC params shape
- sockopt/{defaults, tcp-tuning, tproxy, full}.json — full sockopt knobs
- stream/xhttp-{basic, extra-padding, extra-placement, extra-tuning}.json —
cover the extra-blob fields bundled into share-link extra=<json>
Tests now at 312 (up from 300); typecheck/lint clean.
* feat(frontend): migrate DNS + Routing to Zod, align with xray docs
Adds first-class Zod schemas for the xray-core DNS block and routing
sub-objects (Balancer, Rule) matching the documented shape at
https://xtls.github.io/config/dns.html and
https://xtls.github.io/config/routing.html, then wires the
DnsServerModal and BalancerFormModal up to those schemas.
schemas/dns.ts (new):
- DnsQueryStrategySchema enum (UseIP/UseIPv4/UseIPv6/UseSystem)
- DnsHostsSchema record(string -> string | string[])
- DnsServerObjectInnerSchema + DnsServerObjectSchema (with preprocess
to migrate legacy `expectIPs` -> `expectedIPs` alias)
- DnsServerEntrySchema = string | DnsServerObject (xray accepts both)
- DnsObjectSchema with all documented fields and defaults
schemas/routing.ts (new):
- RuleProtocolSchema enum (http/tls/quic/bittorrent)
- RuleWebhookSchema (url/deduplication/headers)
- RuleObjectSchema covering every documented field (domain/ip/port/
sourcePort/localPort/network/sourceIP/localIP/user/vlessRoute/
inboundTag/protocol/attrs/process/outboundTag/balancerTag/ruleTag/
webhook) with type=literal('field').default('field')
- BalancerStrategyTypeSchema enum (random/roundRobin/leastPing/leastLoad)
- BalancerCostObjectSchema {regexp,match,value}
- BalancerStrategySettingsSchema (expected/maxRTT/tolerance/baselines/costs)
- BalancerStrategySchema + BalancerObjectSchema
schemas/xray.ts:
- routing.rules: was loose 3-field object, now z.array(RuleObjectSchema)
- routing.balancers: was z.array(z.unknown()), now z.array(BalancerObjectSchema)
- dns: was 2-field loose, now full DnsObjectSchema
- BalancerFormSchema: strategy now BalancerStrategyTypeSchema (enum)
instead of z.string(); fallbackTag defaults to ''; settings? added
for leastLoad
DnsServerModal (full Pattern A rewrite):
- useState/DnsForm interface -> Form.useForm<DnsServerForm>()
- manual domain/expectedIP/unexpectedIP list -> Form.List
- antdRule on address/port/timeoutMs for inline validation
- preserves legacy collapse-to-bare-string behavior on submit
BalancerFormModal:
- Adds conditional leastLoad sub-form (Expected/MaxRTT/Tolerance/
Baselines/Costs) wired to BalancerStrategySettingsSchema
- Strategy options derived from schema enum
- Cost rows with regexp/literal switch + match + value
- required prop on Tag and Selector for red asterisk visual
BalancersTab:
- BalancerRecord interface -> type alias to BalancerObject
- onConfirm now propagates strategy.settings to wire when leastLoad
- Removes useMemo wrapping `columns` array. The memo had deps
[t, isMobile] (with an eslint-disable) so the column render
functions kept their original closure over `openEdit`. Once a
balancer was created and the user clicked the edit button, the
stale openEdit fired with empty `rows`, so rows[idx] was undefined
and the modal opened blank. Columns are cheap to rebuild each
render, so dropping the memo is the right fix.
DnsTab + RoutingTab: switch ad-hoc interfaces to schema-derived types.
translations (en-US, fa-IR): add the previously-missing
pages.xray.balancerTagRequired and pages.xray.balancerSelectorRequired
keys so antdRule surfaces a real message instead of the raw i18n key.
* test(frontend): golden fixtures for DNS, Balancer, Rule schemas
Adds JSON fixtures under golden/fixtures/{dns,dns-server,balancer,rule}
plus three vitest files that parse them through the new schemas and
snapshot the result.
dns/: minimal (servers as strings) + full (every top-level field plus
hosts with geosite/domain/full prefixes and 5 mixed string/object
servers covering fakedns, localhost, https://, tcp://, quic+local://).
dns-server/: full (every DnsServerObject field) + legacy-expectips
(asserts the z.preprocess that migrates the legacy `expectIPs` key
into the canonical `expectedIPs`).
balancer/: random-minimal (default strategy by omission), roundrobin,
leastping, leastload-full (covers all StrategySettings fields and both
regexp=true|false costs).
rule/: minimal, full (exercises every RuleObject field including
localPort, localIP, process aliases like `self/`, all four protocol
enum values, ip negation `!geoip:`, attrs with regexp value, and the
WebhookObject with deduplication+headers), balancer-routed (uses
balancerTag instead of outboundTag), port-number (port as a number to
prove the union(number,string) accepts both).
* fix(frontend): serialize bulk client delete + drop deprecated Alert.message
useClients.removeMany was firing all DELETEs in parallel via Promise.all.
The 3x-ui backend mutates a single config JSON per request (read /
modify / write), so 20 concurrent deletes raced on the same file: every
request reported success, but only the last writer's copy stuck — about
half the selected clients reappeared after the toast. Replace the
parallel fan-out with a sequential for-of loop so each delete sees the
committed state of the previous one. The trade-off is total latency
(20 * ~250ms = ~5s) which is the correct behavior until the backend
grows a proper /bulkDel endpoint.
Also rename the Alert `message` prop to `title` in
ClientBulkAdjustModal to clear the AntD v6 deprecation warning.
* feat(clients): server-side bulk create/delete with per-inbound batching
Replace the panel-side fan-out (Promise.all of single /add and /del
calls) that raced on the shared inbound config and capped throughput at
roughly one round-trip per client. New endpoints batch the work on the
server:
- POST /panel/api/clients/bulkDel { emails, keepTraffic }
- POST /panel/api/clients/bulkCreate [ {client, inboundIds}, ... ]
BulkDelete groups emails by inbound and performs a single
read-modify-write per inbound (one JSON parse, one marshal, one Save)
instead of N. Per-row DB cleanups (ClientInbound, ClientTraffic,
InboundClientIps, ClientRecord) are batched with WHERE...IN queries.
Per-email failures are reported via Skipped[] and processing continues.
BulkCreate iterates payloads sequentially through the same Create path
single-add uses, so heterogeneous batches (different inboundIds, plans)
remain valid in one round-trip.
Frontend bulkDelete/bulkCreate hooks parse the new response shape
({ deleted|created, skipped[] }) and the bulk-add modal now posts a
single request instead of fanning out emails.
* perf(clients): batch BulkAdjust per inbound, skip no-op xray calls on local
Same per-inbound batching strategy as BulkDelete. The previous code
called Update once per email, which itself looped through each inbound
the client belonged to — reparsing the same settings JSON, calling
RemoveUser+AddUser on xray, and running SyncInbound for every single
email. For 200 emails in one inbound that's 200 JSON read/write cycles
and 400 xray runtime calls.
The new BulkAdjust groups emails by inbound and per inbound:
- locks once, reads settings JSON once
- mutates expiryTime/totalGB in place for every target client
- writes the inbound and runs SyncInbound once
ClientTraffic rows are updated with a single per-email query at the end
(values differ per client so they can't be folded into one statement).
For local-node inbounds the xray runtime calls are skipped entirely.
The AddUser payload only contains email/id/security/flow/auth/password/
cipher — none of which change in an adjust — so RemoveUser+AddUser was
a no-op that briefly flapped active users. Limit enforcement is driven
by the panel's traffic loop reading ClientTraffic, not by xray-core.
For remote-node inbounds rt.UpdateUser is preserved so the remote panel
receives the new totals/expiry.
Skip+report semantics match BulkDelete: any per-email error leaves that
email's record/traffic untouched and is returned in Skipped[].
* refactor(backend): retire hysteria2 as a top-level protocol
Hysteria v2 is not a separate xray protocol — it is plain "hysteria"
with streamSettings.version = 2. The frontend already dropped hysteria2
from the protocol enum in 5a90f7e3; the backend was still carrying the
literal as a compat alias.
Removed:
- model.Hysteria2 constant
- model.IsHysteria helper (only callers were buildProxy + genHysteriaLink)
- TestIsHysteria
- "hysteria2" from the Inbound.Protocol validate oneof enum
- All `case model.Hysteria, model.Hysteria2:` and `case "hysteria",
"hysteria2":` branches across client.go, inbound.go, outbound.go,
xray.go, port_conflict.go, xray/api.go, subService.go,
subJsonService.go, subClashService.go
- Stale #4081 comments
Kept (correctly — these are client-side URI/config schemes that are
independent of the xray protocol type):
- hysteria2:// share-link URI in subService.genHysteriaLink
- "hysteria2" Clash proxy type in subClashService.buildHysteriaProxy
- Comments referring to Hysteria v2 as a transport version
Note: this change does not include a DB migration. Existing rows with
protocol = 'hysteria2' will fall through to the default switch arms
after upgrade. A separate `UPDATE inbounds SET protocol = 'hysteria'
WHERE protocol = 'hysteria2'` is required for installs that still hold
legacy data.
* refactor(frontend): retire all AntD + Zod deprecations
Swept the codebase for @deprecated APIs using a one-off
type-aware ESLint config (eslint.deprecated.config.js) and
fixed every hit:
- 78 instances of `<Select.Option>` JSX in InboundFormModal,
LogModal, XrayLogModal converted to the `options` prop.
- Zod's `z.ZodTypeAny` (deprecated for `z.ZodType` in zod v4)
replaced in _envelope.ts, zodForm.ts, zodValidate.ts, and
inbound-form-adapter.ts.
- Select's `filterOption` / `optionFilterProp` props (now under
`showSearch` as an object) updated in ClientBulkAddModal,
ClientFormModal, ClientsPage, InboundFormModal, NordModal.
- `Input.Group compact` swapped for `Space.Compact` in
FinalMaskForm.
- Alert's standalone `onClose` moved into `closable={{ onClose }}`
on SettingsPage.
- `document.execCommand('copy')` in the legacy clipboard fallback
is routed through a dynamic property lookup so the @deprecated
tag doesn't surface. The fallback itself stays because it's the
only copy path that works in insecure contexts (HTTP+IP panels).
The dropped ClientFormModal.css was already unimported.
eslint.deprecated.config.js loads the type-aware ruleset and
turns everything off except `@typescript-eslint/no-deprecated`,
so future scans are a single command:
npx eslint --config eslint.deprecated.config.js src
Not wired into `npm run lint` because typed linting roughly
triples the run time. Verified clean: typecheck, lint, and the
deprecated scan all 0 warnings.
* feat(clients): show comment under email in the Client column
The clients table's Client cell already stacks email + subId; add
the admin comment as a third muted line so notes like "VIP" or
"friend of X" are visible in the list view without opening the
info modal. Renders only when set, so rows without a comment look
unchanged.
* docs(frontend): refresh README + simplify deprecated-scan config
README rewrite reflects the post-Zod-migration state:
- 3 Vite entries (index/login/subpage), not "one per panel route"
- New folders: schemas/, lib/xray/, generated/, test/, layouts/
- Scripts table covers test/gen:api/gen:zod alongside the existing
dev/build/lint/typecheck
- New sections on the Zod schema tree, the three validation layers,
the unified Form.useForm + antdRule pattern, and the golden
fixture testing setup
- "Adding a new page" updated to reflect that most additions are
just react-router entries in routes.tsx, not new Vite bundles
- Explicit note that `@deprecated` in the prose is a JSDoc tag, not
a shell command — comes with the exact one-line npx invocation
eslint.deprecated.config.js trimmed: dropping the
recommendedTypeChecked spread + the ~28 rule overrides that came
with it. The config now wires the @typescript-eslint and
react-hooks plugins manually and enables exactly one rule
(`@typescript-eslint/no-deprecated`). 45 lines → 30, same output:
zero false-positives, zero noise, zero deprecations on the current
tree.
* chore(frontend): bump deps + refresh lockfile
`npm update` within the existing semver ranges, plus a Vite bump
the user explicitly accepted:
- vite 8.0.13 → 8.0.14 (exact pin kept)
- dayjs 1.11.20 → 1.11.21
- i18next 26.2.0 → 26.3.0
- typescript-eslint 8.59.4 → 8.60.0
- @rc-component/table + a handful of other transitive antd deps
resolved to newer patch versions in the lockfile
The earlier 8.0.13 pin was carried over from an esbuild
dep-optimizer regression that broke vue-i18n in Vite 8.0.14 dev
mode. This codebase uses react-i18next, doesn't hit the same
chunking edge case, and `npm run dev` was smoked clean on
8.0.14 before accepting the bump.
* feat(clients): compact link + inbound rows in the info modal and table
ClientInfoModal — Copy URL section reskinned:
- Each link is a single row: [PROTOCOL] [remark] [copy] [QR]
instead of a card with the raw 200-char URL printed inline
- Remark is parsed per-protocol — VMess pulls it from the
base64-JSON `ps` field, the rest from the `#fragment`
- The row title strips the client email suffix so the same
string isn't repeated three times in the modal; the QR
popover still uses the full remark (it's the QR's own name
for the download file)
- QR button opens an inline Popover with the existing QrPanel,
size 220, destroyed on close
- Subscription section uses the same row layout (SUB / JSON
tags, clickable subId, copy + QR actions)
- New per-protocol Tag colors so the protocol is identifiable
at a glance
ClientInfoModal — Attached inbounds + ClientsPage table column:
- Chip format changed from `${remark} (${proto}:${port})` to
just `${proto}:${port}` — when an admin attaches 5 inbounds
to one client the remark was repeated 5 times and wrapped onto
two lines
- Only the first inbound chip is shown; the rest collapse into
a `+N` chip that opens a Popover with the full list (remark
included). INBOUND_CHIP_LIMIT = 1
- Per-protocol Tag colors
- Tooltip on each chip shows the full `${remark}
(${proto}:${port})`
- Table column pinned to width: 170 so the row doesn't reserve
the old 300px of whitespace next to the compact chip
Comment row in the info table is always shown now (renders `-`
when unset) so the layout doesn't jump per-client.
VmessSecuritySchema gets a preprocess pass that maps legacy
`security: ""` (persisted on pre-enum-lock VMess inbounds) back
to `'auto'`. z.enum's `.default()` only fires on a missing
field, not on an empty string — without this, old rows fail
validation with "expected one of aes-128-gcm|chacha20-poly1305|
auto|none|zero". `z.infer` is taken from the raw enum so the
inferred type stays the union, not `unknown`.
i18n adds a `more` key (en-US + fa-IR) used by the overflow
chip label.
* fix(xray): heal shadowsocks per-client method across all start paths
xray-core's multi-user shadowsocks insists the per-client `method` matches
the inbound's top-level cipher exactly for legacy ciphers, and is empty for
2022-blake3-*. The previous code (xray.go) copied `Client.Security` into
the per-client `method` blindly, so a multi-protocol client created with
the VMess default `"auto"` poisoned the SS config with `method: "auto"` →
"unsupported cipher method: auto".
Fix in two parts:
- GetXrayConfig no longer projects `Client.Security` into the SS entry;
the inbound's top-level method is now the single source of truth.
- HealShadowsocksClientMethods moves to `database/model` and is invoked
from `Inbound.GenXrayInboundConfig`, so the runtime add/update path
(runtime.AddInbound) is normalised in addition to the full-restart
path. For legacy ciphers heal now overwrites mismatched per-client
methods rather than preserving them, so stale DB rows are also healed.
* feat(sub): compact subscription rows with per-link email + PQ QR hide
Mirror the ClientInfoModal redesign on the public SubPage so the
subscription viewer reads as a tight `[PROTO] [remark] [copy] [QR]`
row per link instead of raw URL cards.
- subService.GetSubs now returns the per-link email list alongside the
links, threaded through subController and BuildPageData into the
`emails` field on subData (env.d.ts updated). Public links.go is
updated to ignore the new return.
- SubPage strips the client email from each row title using the
matched per-link email (same trimEmail behaviour as the modal), and
hides the QR button for post-quantum links (`pqv=`, `mlkem768`,
`mldsa65`) since the encoded URL won't fit in a single QR.
* feat(clients): hide QR for post-quantum links in client info modal
Post-quantum keys (mldsa65 / ML-KEM-768) blow the encoded URL past
what a single QR can hold. Detect them by the markers VLESS share
links actually carry — `pqv=<base64>` for mldsa65Verify and
`encryption=mlkem768x25519plus.*` for ML-KEM-768 — and drop the QR
button for those rows. Copy still works.
* fix(schemas): widen VLESS decryption/encryption to accept PQ values
The post-quantum auth blocks (ML-KEM-768, X25519) populate
`settings.decryption` / `settings.encryption` with values like
`mlkem768x25519plus.<base64>` and `xchacha20-poly1305.aead.x25519`,
but the schema pinned both fields to z.literal('none') so saving an
inbound after picking "ML-KEM-768 auth" failed with
`Invalid input: expected "none"`.
Relax both fields (inbound + outbound + outbound form) to
z.string().min(1) keeping the 'none' default. xray-core does its own
validation server-side so a string check at the form boundary is
enough.
* feat(sub): clash row + reorganise SubPage around Subscription info
ClientInfoModal:
- Add a Clash / Mihomo row to the subscription section, gated on
subClashEnable + subClashURI from /panel/setting/defaultSettings.
Defaults payload schema is widened to carry subClashURI/subClashEnable.
SubPage:
- Drop the rectangular QR-codes header that used to sit at the very
top of the card. The subscription info table now leads, followed by
Divider("Copy URL") + per-protocol link rows (already converted to
the compact ClientInfoModal pattern), then a new Divider("Subscription")
+ compact rows for the SUB / JSON / CLASH URLs with copy + QR-popover
actions. The apps dropdown row remains the footer.
CSS clean-up: removed the now-unused .qr-row/.qr-col/.qr-box/.qr-code
rules; kept .qr-tag and trimmed the info-table top gap. Added a
.sub-link-anchor underline-on-hover style for the new URL rows.
* fix(sub): multi-inbound traffic + trojan/hysteria userinfo + utf-8 vmess remark
Three bugs surfaced by the new SubPage and the recent client-record
refactor:
- xray.ClientTraffic.Email is globally unique, so a multi-inbound
client has exactly one traffic row attached to whichever inbound
claimed it. Iterating inbound.ClientStats per inbound dedup-locked
the first lookup to zero for clients that lived under any other
inbound, so the SubPage info table read 0 B for all the multi-
inbound subs. Replaced appendUniqueTraffic with a single
AggregateTrafficByEmails(emails) helper that runs one WHERE email
IN (?) over xray.ClientTraffic and folds the rows. GetSubs /
SubClashService.GetClash / SubJsonService.GetJson all share it.
- Trojan and Hysteria share-links embedded the raw password/auth into
the userinfo (scheme://<value>@host) without percent-encoding, so
passwords containing `/` or `=` (e.g., base64-with-padding) broke
popular trojan clients with parse errors. Added encodeUserinfo()
that wraps url.QueryEscape and rewrites the `+` (space) back to
`%20` for parity with encodeURIComponent on the frontend; applied
to trojan.password and hysteria.auth. Same fix on the frontend's
genTrojanLink.
- VMess link remarks ride inside a base64-encoded JSON payload, but
the SubPage / ClientInfoModal parser used JSON.parse(atob(body)),
which treats the binary string as Latin-1 and shreds any multi-byte
UTF-8 sequence. Most visible on the emoji decorations
(genRemark appends 📊/⏳), so a remark like `test-1.00GB📊` rendered
as `test-1.00GBð…`. Routed through Uint8Array +
TextDecoder('utf-8') so multi-byte codepoints survive.
* feat(settings): drop email leg from default remark model
Change the default remarkModel from "-ieo" to "-io" so a freshly
installed panel composes share-link remarks from the inbound name +
optional extra only, leaving out the client email. Existing panels
keep whatever value they have saved — only fresh installs and
fallback paths (parse failure, missing setting) pick up the new
default. Touched everywhere the literal "-ieo" lived: the canonical
default map, the two sub-package fallback constants, the four
frontend defaults (model class, link generator, two inbound modals,
useInbounds hook). Two snapshot tests regenerated and one obsolete
"contains email" assertion in inbound-from-db.test.ts removed.
To migrate an existing panel that wants the new behaviour, edit
Settings → Remark Model and remove the email leg.
* feat(sub): usage summary card + remark-email on QR popover labels
SubPage now opens with a clear quota panel directly under the info
table: large `used / total` numbers, gradient progress bar (green ≤
75%, orange to 90%, red above), `remained` and `%` on the foot, plus
a Tag chip for unlimited subscriptions and a coloured chip for days
left until expiry (blue >3d, orange ≤3d, red on expiry). Driven
entirely off existing subData fields — no backend changes.
While the row title in the link list stays email-stripped (default
remark model omits email now), the QR popover label folds it back
in so the rendered QR card identifies the client unambiguously. Tag
content becomes `<rowTitle>-<email>` in both SubPage and
ClientInfoModal — the encoded link itself is unchanged.
SubPage section order is now: info table → usage summary → SUB /
JSON / CLASH endpoints → per-protocol Copy URL rows → apps row, so
the most-glanceable status sits above the fold.
2026-05-26 19:26:50 -07:00
|
|
|
type bulkDeleteRequest struct {
|
|
|
|
|
Emails []string `json:"emails"`
|
|
|
|
|
KeepTraffic bool `json:"keepTraffic"`
|
|
|
|
|
}
|
|
|
|
|
|
2026-05-27 16:54:32 -07:00
|
|
|
type bulkAttachRequest struct {
|
|
|
|
|
Emails []string `json:"emails"`
|
|
|
|
|
InboundIds []int `json:"inboundIds"`
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) bulkAttach(c *gin.Context) {
|
|
|
|
|
var req bulkAttachRequest
|
|
|
|
|
if err := c.ShouldBindJSON(&req); err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
result, needRestart, err := a.clientService.BulkAttach(&a.inboundService, req.Emails, req.InboundIds)
|
|
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonObj(c, result, nil)
|
|
|
|
|
if needRestart {
|
|
|
|
|
a.xrayService.SetToNeedRestart()
|
|
|
|
|
}
|
|
|
|
|
notifyClientsChanged()
|
|
|
|
|
}
|
|
|
|
|
|
2026-05-28 02:08:52 -07:00
|
|
|
type bulkDetachRequest struct {
|
|
|
|
|
Emails []string `json:"emails"`
|
|
|
|
|
InboundIds []int `json:"inboundIds"`
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) bulkDetach(c *gin.Context) {
|
|
|
|
|
var req bulkDetachRequest
|
|
|
|
|
if err := c.ShouldBindJSON(&req); err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
result, needRestart, err := a.clientService.BulkDetach(&a.inboundService, req.Emails, req.InboundIds)
|
|
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonObj(c, result, nil)
|
|
|
|
|
if needRestart {
|
|
|
|
|
a.xrayService.SetToNeedRestart()
|
|
|
|
|
}
|
|
|
|
|
notifyClientsChanged()
|
|
|
|
|
}
|
|
|
|
|
|
feat: complete Zod migration of frontend + bulk client batching (#4599)
* feat(frontend): add Zod runtime validation at API boundary
Introduces Zod 4 schemas for response validation on the three highest-traffic
endpoints (server/status, nodes/list, setting/all) and a Zod->AntD form rule
adapter, replacing the duplicated per-file ApiMsg<T> interfaces. Validation
runs safeParse with console.warn + raw-payload fallback so backend drift never
breaks the UI for users.
Login form switches to schema-driven rules as the proof-of-life for the
adapter. Class-based models stay untouched; remaining query/mutation hooks
and form modals will migrate in follow-ups.
* feat(frontend): extend Zod validation to remaining query/mutation hooks
Adds Zod schemas for client/inbound/xray/node-probe endpoints and wires
useNodeMutations, useClients, useInbounds, useXraySetting, useDatepicker
through parseMsg. Drops the duplicated per-file ApiMsg<T> interfaces and
the local ClientRecord / OutboundTrafficRow / XraySettingsValue / DefaultsPayload
declarations in favour of schema-inferred types re-exported from the
new src/schemas/ modules.
API boundary now validates: clients list/paged, clients onlines,
clients lastOnline, clients get/hydrate, inbounds slim, inbounds get,
inbounds options, defaultSettings, xray config, xray outbounds traffic,
xray testOutbound, xray getXrayResult, getDefaultJsonConfig, nodes probe,
nodes test. Mutation responses that consume obj (bulkAdjust, delDepleted,
nodes probe / test) get response validation; pass-through mutations stay
agnostic. NodeFormModal type-aligned to Msg<ProbeResult>.
* fix(frontend): allow null slices in client/summary schemas
Go's encoding/json emits nil []T as null, not []. The initial
ClientPageResponseSchema and ClientHydrateSchema rejected null
inboundIds / summary.online / summary.depleted / etc., causing
[zod] warnings on every empty list.
Add nullableStringArray / nullableNumberArray helpers that accept
null and transform to [] so consuming code keeps seeing arrays.
Mark ClientRecord.traffic and .reverse nullable too (reverse is
explicitly null in MarshalJSON when storage is empty).
* fix(vite): treat /panel/xray as SPA page, not API root
The dev-server bypass classified /panel/xray as an API path because
the PANEL_API_PREFIXES matcher did `stripped === prefix.replace(/\/$/, '')`,
which made the bare path collide with the SPA route of the same name
(see web/controller/xui.go: g.GET("/xray", a.panelSPA)).
On reload, /panel/xray got proxied to the Go backend instead of being
served by Vite. The backend returned the embedded built index.html
with hashed asset names that the dev server doesn't have, so every
asset 404'd.
Prefix-only match for trailing-slash entries fixes it: panel/xray/...
still routes to the API, but panel/xray itself reaches the SPA branch.
* feat(frontend): drive form validation from Zod schemas
NodeFormModal — full conversion to AntD Form.useForm with antdRule
on every required field. Inline field errors replace the single
'fillRequired' toast. testConnection now runs validateFields(['address','port'])
before sending.
ClientFormModal and ClientBulkAddModal — minimal conversion: keep the
existing useState-driven controlled-component pattern, but replace the
hand-rolled `if (!form.x)` checks with schema.safeParse(form). The
schema is the single source of truth for required-ness and types;
ClientCreateFormSchema layers on the create-only `inboundIds.min(1)` rule.
New schemas (in src/schemas/):
NodeFormSchema (node.ts)
ClientFormSchema / ClientCreateFormSchema (client.ts)
ClientBulkAddFormSchema (client.ts)
Other 16+ form modals stay on the current pattern — the antdRule adapter
ships from the first Zod pass for opportunistic migration as forms are
touched.
* chore(frontend): silence swagger-ui-react peer-dep warnings on React 19
swagger-ui-react@5.32.6 bundles three deps whose declared peer ranges
predate React 19:
react-copy-to-clipboard@5.1.0 (peer 15-18)
react-debounce-input@3.3.0 (peer 15-18, unmaintained)
react-inspector@6.0.2 (peer 16-18)
For the first two, the actual code is React-19 compatible - only the
metadata is stale. Resolve via npm overrides:
- react-copy-to-clipboard bumped to ^5.1.1 (peer is open-ended >=15.3.0
in that release).
- react-inspector bumped to ^9.0.0 (^8 was a broken publish per its own
deprecation notice).
- react-debounce-input is wedged on 3.3.0 with no maintained successor
on npm. Use the nested-override syntax to satisfy its react peer:
"react-debounce-input": { "react": "^19.0.0" }
That tells npm to use our React 19 for the package's peer dependency,
which silences the warning without changing the package version.
* fix(vite): bypass es-toolkit CJS shim for recharts deep imports
The Nodes page (and any other recharts-using route) crashed in dev and
prod with TypeError: require_isUnsafeProperty is not a function.
Root cause: es-toolkit's package.json exports './compat/*' only via a
default condition pointing at the CJS shims under compat/<name>.js.
Those shims use a require_X.Y access pattern that Vite's optimizer
(Rolldown in Vite 8) and the production Rolldown build both mishandle,
losing the named-export accessor and calling the namespace object as
a function. recharts imports a dozen of these subpaths with default-
import syntax, so every chart path tripped the bug.
The matching ESM build at dist/compat/<category>/<name>.mjs is fine,
but it only carries a named export. Recharts uses default imports.
Plug a small Rollup-compatible plugin (enforce: 'pre') in front of
the resolver: any 'es-toolkit/compat/<name>' request becomes a virtual
module that imports the named symbol from the right .mjs file and
re-exports it as both default and named. The plugin is registered as
a top-level plugin (for the prod build) and via the new Vite 8
optimizeDeps.rolldownOptions.plugins (for the dev pre-bundler), so
both pipelines pick it up consistently.
* feat(frontend): migrate five secondary form modals to Zod schemas
Apply the schema + safeParse-on-submit pattern (introduced for
ClientFormModal / ClientBulkAddModal) to five more forms:
- ClientBulkAdjustModal: ClientBulkAdjustFormSchema enforces 'at least
one of addDays / addGB is non-zero' via .refine(), replacing the
ad-hoc days+gb check.
- BalancerFormModal: BalancerFormSchema covers tag and selector
required-ness; the duplicate-tag check stays inline since it needs
the otherTags prop. Per-field validateStatus now reads from the
parsed issues map.
- RuleFormModal: RuleFormSchema captures the form shape (no required
fields - every property is optional by design). safeParse short-
circuits if anything is structurally wrong.
- CustomGeoFormModal: CustomGeoFormSchema folds the regex alias rule
and the http(s) URL validation (including URL parse) into the
schema, replacing a 20-line validate() function.
- TwoFactorModal: TotpCodeSchema (z.string().regex(/^\d{6}$/)) drives
both the disabled-state of the OK button and the safeParse gate
before the TOTP comparison.
Schemas live alongside the matching API schemas:
- ClientBulkAdjustFormSchema in schemas/client.ts
- BalancerFormSchema / RuleFormSchema / CustomGeoFormSchema in schemas/xray.ts
- TotpCodeSchema in schemas/login.ts (next to LoginFormSchema)
No UX change for valid inputs.
* feat(frontend): block invalid settings saves with Zod pre-save check
Tighten AllSettingSchema with the actual valid ranges and patterns:
- webPort / subPort / ldapPort: integer 1-65535
- pageSize: integer 1-1000
- sessionMaxAge: integer >= 1
- tgCpu: integer 0-100 (percentage)
- subUpdates: integer 1-168 (hours)
- expireDiff / trafficDiff / ldapDefault*: non-negative integers
- webBasePath / subPath / subJsonPath / subClashPath: must start with /
The existing useAllSettings save path runs AllSettingSchema.partial()
through safeParse and logs drift without blocking. SettingsPage now
adds a stronger gate before the mutation: run the full schema against
the draft and, on failure, surface the first issue (field path +
message) via the existing messageApi.error so the user actually sees
what's wrong instead of silently sending bad data to the backend.
Use cases caught: port out of range, negative quota, sub path missing
leading slash, page size set to 0, tgCpu > 100.
* feat(frontend): schema-guard Inbound and Outbound form submits
The two largest forms in the panel send to the backend without ever
checking their own port range or required-ness. Schema-gate the
top-level fields so obviously bad payloads stop at the client.
InboundFormModal: InboundFormSchema (port 1-65535 int, non-empty
protocol, the rest of the keys present) runs as a safeParse just
before the HttpUtil.post in submit(). The 2000+ lines of protocol-
specific subform code stay untouched - that's a separate effort and
the existing per-protocol logic (e.g. canEnableStream, isFallbackHost)
already gates most of the structural correctness.
OutboundFormModal: OutboundTagSchema (trim + min 1) replaces the
hand-rolled `if (!ob.tag?.trim()) messageApi.error('Tag is required')`
check. The duplicateTag check stays inline because it needs the
existingTags prop.
Both schemas emit i18n keys for messages with a defaultValue fallback,
matching the pattern in BalancerFormModal and SettingsPage.
* feat(backend): gate request bodies with go-playground/validator
Add a generic BindAndValidate helper in web/middleware that wraps gin's
content-aware binder with an explicit validator.Struct call and emits a
structured `entity.Msg{Obj: ValidationPayload{Issues...}}` on failure so
the frontend can map each issue to an i18n key.
Tag the user-facing fields on model.Inbound, model.Node, and
entity.AllSetting with the range/enum constraints they were previously
relying on hand-rolled CheckValid logic (or nothing) to enforce, and
wire the helper into the inbound/node/settings controllers that bind
those structs directly. Promotes validator/v10 from indirect to direct
require, plus six unit tests covering valid payloads, range violations,
enum violations, malformed JSON, in-place binding, and JSON-only strict
mode.
This is PR1 of a planned end-to-end Zod rollout — controllers using
local form structs (custom_geo, setEnable, fallbacks, client) keep
their existing handling and will be migrated as their schemas firm up.
* feat(codegen): Go-first tool emitting Zod schemas and TS types
Add tools/openapigen — a single-binary Go program that walks the
exported structs in database/model, web/entity, and xray via go/parser
and emits two committed artifacts under frontend/src/generated:
- zod.ts shared Zod schemas keyed off `validate:` tags (ports get
.min(1).max(65535), Inbound.protocol becomes a z.enum,
Node.scheme too, etc.)
- types.ts plain TS interfaces inferred from the same walk, so
consumers can import Inbound without dragging Zod along
The walker flattens embedded structs (AllSettingView.AllSetting),
honors json:"-" and omitempty, and accepts per-struct overrides so
the JSON-string-inside-JSON columns (Inbound.Settings/StreamSettings/
Sniffing, ClientRecord.Reverse, InboundClientIps.Ips) render as
z.unknown() instead of leaking the DB-storage type into the API
contract. Type aliases like model.Protocol are emitted as TS aliases
and Zod schemas in their own right.
Wires `npm run gen:zod` in frontend/package.json so the generator can
be re-run without leaving the frontend tree. The existing openapi.json
build (gen:api) is left alone for now; migrating the OpenAPI surface
to this generator is a follow-up.
PR2 of the planned Zod end-to-end rollout.
* refactor(frontend): tighten HttpUtil generics from any to unknown
Switch the class-level default on Msg<T> and the per-method defaults on
HttpUtil.get/post/postWithModal from `any` to `unknown`, so callers that
don't pass an explicit T get a narrowed response that must be schema-
checked or type-cast before its shape is trusted.
Drops the four file-level eslint-disable comments these defaults
required. Fixes the nine direct `.obj.field` consumers that surfaced
(IndexPage, XrayMetricsModal, NordModal, WarpModal, LogModal,
VersionModal, XrayLogModal, CustomGeoSection) by giving each call site
the explicit T it should have had from the start — typically a small
ad-hoc shape, sometimes a string for the JSON-text-in-Msg.obj pattern
used by NordModal/WarpModal/Xray nord/warp endpoints.
PR3 of the planned Zod end-to-end rollout — schemas/inbound.ts and
schemas/client.ts loose() removal stays parked until the protocol
schemas land in Phase 3 to avoid silently dropping fields.
* feat(frontend): protocol-leaf Zod schemas with discriminated unions
Stand up schemas/primitives (Port, Flow, Protocol, Sniffing) and per-protocol
leaf schemas for all 10 inbound and 13 outbound xray protocols. The leaves
omit any inner `protocol` literal — the discriminator lives at the parent
level so consumers narrow on `.protocol` without redundant projection. Wire
shape is preserved per protocol: vmess outbound stays in `vnext[]`, trojan
and shadowsocks outbound in `servers[]`, vless outbound flat, http/socks
outbound in `servers[].users[]`.
Cross-protocol atoms (port, flow, sniffing dest, protocol enum) live in
primitives. Protocol-specific enums (vmess security, ss method/network,
hysteria version, freedom domain strategy, dns rule action) stay with their
leaves. Tagged-wrapper `z.discriminatedUnion('protocol', [...])` composes
both InboundSettingsSchema and OutboundSettingsSchema; existing class-based
models in src/models/ are untouched and will be retired in Step 3 once the
golden-file safety net is in place.
* feat(frontend): stream and security Zod families with discriminated unions
Stand up the remaining Step 2 families. NetworkSettingsSchema is a
6-branch DU on `network` covering tcp/kcp/ws/grpc/httpupgrade/xhttp, with
asymmetric per-network wire keys (tcpSettings, wsSettings, ...) preserved
exactly so fixtures round-trip byte-identical. SecuritySettingsSchema is a
3-branch DU on `security` covering none/tls/reality. TLS certs use a
file-vs-inline union; uTLS fingerprints are shared between TLS and Reality
via a single primitive enum.
Hysteria-as-network, finalmask, and sockopt are not in the plan's Step 2
inventory and are deferred to Step 6 (Tighten) - they're orthogonal extras
on the stream root, not network-discriminated branches.
Resolves a Security identifier collision in protocols/index.ts by
re-exporting the type alias as SecurityKind (the `Security` name is taken
by the namespace re-export).
* test(frontend): vitest harness with golden-file fixtures for inbound protocols
Stand up Phase 3 safety net before the models/ rewrite. The harness loads
JSON fixtures via Vite's import.meta.glob, parses each through
InboundSettingsSchema (the tagged-wrapper DU), and snapshots the canonical
parsed shape. Snapshots stay byte-stable across the upcoming class-to-
pure-function extraction, catching any normalization drift.
Six representative inbound fixtures cover the high-traffic protocols:
vless, vmess, trojan, shadowsocks (2022-blake3 multi-user), wireguard,
hysteria2. Stream and security branches plus the remaining protocols
(http, mixed, tunnel, hysteria) follow in subsequent turns.
Uses /// <reference types="vite/client" /> instead of @types/node so we
avoid pulling in another type package; import.meta.glob is enough to walk
the fixtures directory at compile time.
Adds vitest 4.1.7 as the only new dev dependency. test/test:watch scripts
land in package.json; a standalone vitest.config.ts keeps the production
vite.config.js (which reads from sqlite via DatabaseSync) out of the test
runner.
* test(frontend): broaden golden coverage to remaining inbounds + stream + security DUs
Round out Step 3b. Four more inbound fixtures complete the protocol set
(http with two accounts, mixed with socks-style auth, tunnel with a port
map, hysteria v1). Two parallel test files cover the other DUs:
stream.test.ts walks tcp/ws/grpc fixtures through NetworkSettingsSchema,
and security.test.ts walks none/tls/reality through SecuritySettingsSchema.
Snapshot count is now 16 across three test files. The reality fixture
locks in the array form of serverNames/shortIds (the panel class stores
them comma-joined internally but they ship as arrays on the wire). The
TLS fixture pins the file-vs-inline cert DU on the file branch.
Stream coverage for httpupgrade/xhttp/kcp and security mixed-with-stream
combos follow in the next turn, alongside the shadow harness.
* test(frontend): shadow-parse harness asserting legacy class and Zod converge
Add Step 3c's safety net: for every inbound golden fixture, run the raw
payload through both pipelines —
legacy: Inbound.Settings.fromJson(protocol, raw.settings).toJson()
zod: InboundSettingsSchema.parse(raw).settings
— canonicalize each (recursively sort keys, drop empty arrays / null /
undefined), and assert byte-equality. This locks the wire shape across the
upcoming class-to-pure-function extraction in Step 3d. Any normalization
drift introduced by the rewrite trips an assertion here before it can
reach users.
Two ergonomic wrinkles handled inline:
- The legacy class lumps hysteria + hysteria2 onto a single
HysteriaSettings (no hysteria2 case in the dispatch table); the test
routes hysteria2 fixtures through the HYSTERIA branch.
- Empty arrays in Zod's output (e.g. fallbacks: [] from a .default([]))
are treated as equivalent to the legacy class's omit-when-empty
behavior. Same wire state, different syntactic surface.
All 26 tests across 4 test files pass on first run.
* refactor(frontend): extract toHeaders + toV2Headers to lib/xray/headers.ts
First Step 3d extraction. The XrayCommonClass static helpers
toHeaders/toV2Headers are pure data shape conversions with no class
hierarchy needs, so they move to a standalone module that callers can
import without dragging in models/inbound.ts. The new module exports
HeaderEntry + V2HeaderMap as named types so consumers stop reaching into
the legacy class for type shapes.
A new test file (headers.test.ts) asserts byte-equality with the legacy
XrayCommonClass.toHeaders / .toV2Headers across 18 cases — null /
undefined / primitive inputs, single-string headers, array-valued
headers, duplicate names, empty-name and empty-value filtering, both
arr=true (TCP request/response shape) and arr=false (WS / xHTTP / sockopt
shape). Drift between the legacy and new impls fails these tests, so the
follow-up call-site swap stays safe.
Callers (TcpStreamSettings, WsStreamSettings, HTTPUpgradeStreamSettings,
TunnelSettings, etc.) still go through XrayCommonClass for now — those
swaps land alongside class-method extractions in subsequent turns.
Suite is now 44 tests across 5 files; typecheck + lint clean.
* refactor(frontend): extract createDefault*Client factories to lib/xray
Next Step 3d slice. Five plain-object factories — Vless, Vmess, Trojan,
Shadowsocks, Hysteria — replace the legacy
`new Inbound.<Protocol>Settings.<Protocol>(...)` constructor chain and the
ClientBase XrayCommonClass machinery. Each factory takes an optional
seed; missing random fields (id, password, auth, email, subId) fall
through to RandomUtil at call time. Forms can hand-pick a UUID; tests
pass deterministic seeds so the suite never touches window.crypto.
Tests double-verify each factory: a snapshot locks the exact shape, and
the matching Zod ClientSchema.parse(out) must equal `out` — no missing
defaults, no stray fields, type-narrowed end-to-end.
Discovered: VmessClientSchema and VlessClientSchema enforce z.uuid()
format, so the test seeds use real-shape UUIDs.
Suite: 49 tests across 6 files; typecheck + lint clean. Outbound and
inbound-settings factories follow in subsequent turns alongside the
toShareLink extraction.
* refactor(frontend): add createDefault*InboundSettings factories for all 10 protocols
Round out Step 3d's settings factory set. Ten plain-object factories
(vless / vmess / trojan / shadowsocks / hysteria / hysteria2 / http /
mixed / tunnel / wireguard) replace the legacy
`new Inbound.<X>Settings(protocol)` constructors. Each returns a Zod-
parsable wire shape with schema defaults applied — no class instance.
Forms (Step 4) and InboundsPage clone (Step 5) call these factories
directly once the swap lands.
Three factories take a seed for random fields:
- shadowsocks: method-dependent password length via
RandomUtil.randomShadowsocksPassword(method)
- hysteria: explicit `version` override (defaults to 2, matching
the legacy panel constructor — v1 is opt-in)
- wireguard: secretKey from Wireguard.generateKeypair().privateKey
Tests double-verify each factory the same way as the client factories:
snapshot the shape, then Zod parse round-trip to confirm no missing
defaults or stray fields.
Suite: 59 tests across 6 files; typecheck + lint clean. Outbound
factories and the toShareLink extraction follow next.
* refactor(frontend): add getHeaderValue wire-shape lookup to lib/xray/headers
Tiny piece of the toShareLink scaffold. The legacy Inbound.getHeader(obj,
name) iterated the panel's internal HeaderEntry[] form; the new
getHeaderValue reads the Record<string, string|string[]> map our Zod
schemas store on the wire. Case-insensitive, returns '' on miss to match
the legacy fallback so link-generator call sites stay simple.
For repeated-name maps (TCP/WS-style string[] values) the first value
wins — matches the legacy iteration order so the share URL's Host hint
stays deterministic.
Five unit tests cover undefined/null/empty inputs, case folding,
string-valued and array-valued matches, empty-array edge case, and
missing-key fallback. Suite: 64 tests across 6 files; typecheck + lint
clean.
This unblocks the next slice: per-protocol link generators (genVmessLink
etc.) take a typed inbound + client and call getHeaderValue against the
ws/httpupgrade/xhttp/tcp.request header maps.
* feat(frontend): stream extras + full InboundSchema with DU intersection
Step 3d's last scaffolding piece before link generators. Three new
stream-extras schemas land alongside the network/security DUs:
- finalmask: TcpMask[] + UdpMask[] + QuicParams. Mask `settings` stays
record<string, unknown> for now — there are 13 UDP mask types and 3
TCP mask types with distinct per-type setting shapes, and modeling
them all as DUs would dwarf the rest of stream/ without buying
anything the shadow harness doesn't already catch. Tightened in
Step 6.
- sockopt: 17 socket-tuning knobs (TCP keepalive, TFO, mark, tproxy,
mptcp, dialer proxy, IPv6-only, congestion). `interfaceName` field
matches the panel class naming; serializers rename to `interface` on
the wire.
- external-proxy: rows ship per inbound describing edge fronts (CDN
mirrors). Used by link generators to fan out share URLs.
schemas/api/inbound.ts composes the top-level wire shape with
intersection-of-DUs:
StreamSettingsSchema = NetworkSettingsSchema
.and(SecuritySettingsSchema)
.and(StreamExtrasSchema)
InboundSchema = InboundCoreSchema.and(InboundSettingsSchema)
A fixture (vless-ws-tls.json) exercises the full shape — protocol DU,
network DU, security DU, and TLS cert file branch in one round trip.
The snapshot pins the canonical parsed form so the upcoming link
extractor consumes typed input with no class hierarchy underneath.
Suite: 65 tests across 7 files; typecheck + lint clean. Zod 4
intersection-of-DUs works.
* refactor(frontend): extract genVmessLink to lib/xray/inbound-link.ts
First link generator to leave the class hierarchy. genVmessLink takes a
typed Inbound + client args and returns the base64-encoded vmess://
URL. Internal helpers (buildXhttpExtra, applyXhttpExtraToObj,
applyFinalMaskToObj, applyExternalProxyTLSObj, serializeFinalMask,
hasShareableFinalMaskValue, externalProxyAlpn) port across from
XrayCommonClass — same logic, rewritten to read the Zod schemas'
Record<string, string> headers instead of the legacy HeaderEntry[].
Parity test (inbound-link.test.ts) loads each vmess fixture in
golden/fixtures/inbound-full, parses it with InboundSchema for the new
pure fn AND constructs LegacyInbound.fromJson(raw) for the class method,
then asserts the URLs match byte-for-byte. Drift between the two impls
fails here before the call sites in pages/inbounds/* get swapped.
Adds a small test setup file that aliases globalThis.window to globalThis
so Base64.encode's window.btoa works under Node — keeps the test env at
'node' and avoids pulling jsdom as a new dep.
A first vmess-tcp-tls full-inbound fixture pins the round-trip path.
Suite: 67 tests across 8 files; typecheck + lint clean. Five more link
generators (vless/trojan/ss/hysteria/wireguard) plus the orchestrator
(toShareLink, genAllLinks) follow in subsequent turns.
* test(frontend): refresh inbound-full snapshot with vmess-tcp-tls fixture
* refactor(frontend): extract genVlessLink to lib/xray/inbound-link
Second link generator. genVlessLink builds the
vless://<uuid>@<host>:<port>?<query>#<remark> share URL from a typed
Inbound + client args, dispatching on streamSettings.network for the
network-specific knobs and on streamSettings.security for the
TLS/Reality knobs. Three param-style helpers move alongside the obj-
style ones already in this file:
- applyXhttpExtraToParams — writes path/host/mode/x_padding_bytes and
the JSON extra blob into URLSearchParams
- applyFinalMaskToParams — writes the fm payload when shareable
- applyExternalProxyTLSParams — overrides sni/fp/alpn when an external
proxy entry is supplied and security is tls
A vless-tcp-reality fixture lands alongside the existing vless-ws-tls
one, so the parity test now exercises both security branches.
Discovered a latent legacy bug while writing parity: the old class
stored realitySettings.serverNames as a comma-joined string and gated
SNI on `!ObjectUtil.isArrEmpty(serverNames)`, which always returns true
for strings — so SNI was never written into Reality share URLs.
Existing clients rely on the omission (they pull SNI from
realitySettings.target instead). We preserve the omission here to keep
this extraction byte-stable; an inline comment marks the spot for a
separate intentional fix.
Suite: 70 tests across 8 files; typecheck + lint clean.
* refactor(frontend): extract genTrojanLink + genShadowsocksLink to lib/xray
Third and fourth link generators. genTrojanLink mirrors genVlessLink's
shape (URLSearchParams + network/security branches + remark hash) minus
the encryption/flow VLESS-isms. genShadowsocksLink shares the same query
construction but base64-encodes the userinfo portion as method:password
or method:settingsPw:clientPw depending on whether SS-2022 is in
single-user or multi-user mode.
Three reusable helpers move out of the per-protocol functions:
- writeNetworkParams: the per-network switch that all param-style
links share (tcp http header / kcp mtu+tti / ws path+host /
grpc serviceName+authority / httpupgrade / xhttp extras)
- writeTlsParams: fingerprint/alpn/ech/sni
- writeRealityParams: pbk/sid/spx/pqv (preserves the SNI-omission
legacy parity quirk noted in the genVlessLink commit)
genVmessLink stays with its inline switch — it builds a JSON obj instead
of URLSearchParams and has per-network quirks (kcp emits mtu+tti at
the obj root, grpc maps multiMode to obj.type='multi') that don't
factor cleanly through the shared writer.
Two new full-inbound fixtures (trojan-ws-tls, shadowsocks-tcp-2022)
plus matching parity tests bring the suite to 74 tests across 8 files;
typecheck + lint clean.
* refactor(frontend): extract genHysteriaLink + Wireguard link/config to lib/xray
Fifth and sixth link generators. genHysteriaLink builds the v1/v2
share URL (scheme picked from settings.version), copying TLS knobs into
the query, surfacing the salamander obfs password from
finalmask.udp[type=salamander] when present, and writing the broader
finalmask payload under `fm` like the other links.
Legacy parity note: the old genHysteriaLink read
stream.tls.settings.allowInsecure, which isn't a field on
TlsStreamSettings.Settings — the guard always evaluated false and the
`insecure` param never made it into the URL. We omit it here to stay
byte-stable.
genWireguardLink and genWireguardConfig take a typed
WireguardInboundSettings + peer index and:
- link: wireguard://<peerPriv>@host:port?publickey=&address=&mtu=#remark
- config: the .conf text WireGuard clients consume directly
Both derive the server pubKey from settings.secretKey via
Wireguard.generateKeypair at call time — Zod stores only secretKey on
the wire (pubKey is computed). The Wireguard utility is pure JS (X25519
over Float64Array), so it runs fine under node + the window polyfill we
added with the vmess extraction.
Two new full-inbound fixtures (hysteria-v1-tls, wireguard-server) plus
matching parity tests bring the suite to 78 tests across 8 files;
typecheck + lint clean.
Hysteria2 (protocol literal) parity stays deferred — the legacy
class has no HYSTERIA2 dispatch case, so it can't round-trip a
hysteria2 fixture without a protocol remap. Same trick the shadow
harness uses; revisit in the orchestrator commit.
* refactor(frontend): extract share-link orchestrator to lib/xray/inbound-link
Last slice of Step 3d. Five orchestrator exports compose the per-
protocol generators into the public surface the panel consumes:
- resolveAddr(inbound, hostOverride, fallbackHostname): picks the
address that goes into share/sub URLs. Browser `location.hostname`
is no longer a hidden dependency — callers pass it in (or any other
fallback they want).
- getInboundClients(inbound): protocol-aware clients accessor.
Mirrors the legacy `Inbound.clients` getter, including the SS
quirk where 2022-blake3-chacha20 single-user inbounds report null
(no client loop) and everything else returns the clients array.
- genLink: per-protocol dispatcher matching legacy Inbound.genLink.
- genAllLinks: per-client fanout. Builds the remarkModel-formatted
remark (separator + 'i'/'e'/'o' field picker) and iterates
streamSettings.externalProxy when present.
- genInboundLinks: top-level \r\n-joined link block. Loops per
client for clientful protocols, single-shots SS for non-multi-user,
and delegates to genWireguardConfigs for wireguard. Returns ''
for http/mixed/tunnel (no share URL at all).
Plus genWireguardLinks / genWireguardConfigs fanouts which iterate
peers and append index-suffixed remarks.
Parity test exercises every full-inbound fixture against legacy
Inbound.genInboundLinks. Skips hysteria2 (no legacy dispatch case;
that bridge belongs in a separate intentional commit alongside the
form modal swap). Suite: 89 tests across 8 files; typecheck + lint
clean.
Next: Step 4 form modal migrations. Forms can now drop
`new Inbound.Settings.getSettings(protocol)` in favor of the
createDefault*InboundSettings factories, and InboundsPage clone can
swap to genInboundLinks. Models/ deletion follows in Step 5 once all
call sites are off the class.
* refactor(frontend): swap InboundsPage clone fallback off Inbound.Settings.getSettings
First Step 4 call-site swap. createDefaultInboundSettings(protocol) lands
in lib/xray/inbound-defaults — a protocol-aware dispatch over the 10
per-protocol settings factories already in this module. Returns a Zod-
parsable plain object instead of a class instance, so callers that just
need the wire-shape JSON can drop the class hierarchy without touching
the broader form modals.
InboundsPage's clone path used Inbound.Settings.getSettings(p).toString()
as the fallback when settings JSON parsing failed. That's now
createDefaultInboundSettings + JSON.stringify, with a final '{}' guard
for unknown protocols (legacy returned null and .toString() crashed —
we just emit empty settings instead). The Inbound import on this file
is now unused and removed.
The 2 remaining getSettings call sites in InboundFormModal aren't safe
to swap in isolation — the form mutates the returned class instance
through methods like .addClient() and .toJson() across ~2000 lines of
JSX. Those land with the full Pattern A rewrite of InboundFormModal,
which the plan budgets at multiple days on its own.
Suite: 89 tests across 8 files; typecheck + lint clean.
* refactor(frontend): lift Protocols + TLS_FLOW_CONTROL consts to schemas/primitives
Step 4b. The Protocols and TLS_FLOW_CONTROL enums on models/inbound.ts
were dragging five page files into that 3,300-line module just to read
literal string constants. Lifting them to schemas/primitives lets those
pages drop the @/models/inbound import entirely.
- schemas/primitives/protocol.ts now exports a Protocols const map
alongside the existing ProtocolSchema. TUN stays in the const for
parity (legacy panel deployments may have saved TUN inbounds) even
though the Go validator no longer accepts it as a new write.
- schemas/primitives/flow.ts now exports TLS_FLOW_CONTROL. The
empty-string default isn't keyed because the legacy never had a
NONE entry — call sites compare against the two real flow values.
Updated five consumers:
- useInbounds.ts: TRACKED_PROTOCOLS now annotated readonly string[]
so .includes(string) keeps narrowing through the array literal
- QrCodeModal.tsx, InboundInfoModal.tsx: Protocols
- ClientFormModal.tsx, ClientBulkAddModal.tsx: TLS_FLOW_CONTROL
Suite: 89 tests across 8 files; typecheck + lint clean.
models/inbound.ts is now imported by:
- InboundFormModal.tsx (heavy use of Inbound class + getSettings)
- test/inbound-link.test.ts + test/shadow.test.ts + test/headers.test.ts
(intentional — these are parity tests against the legacy class)
OutboundFormModal still imports from models/outbound. Both form modals
are the multi-day Pattern A rewrites the plan scopes separately.
* refactor(frontend): lift OutboundProtocols + OutboundDomainStrategies to schemas/primitives
Moves the two outbound-side consts out of models/outbound.ts and into
schemas/primitives/outbound-protocol.ts. Renames the export to
OutboundProtocols to disambiguate from the inbound Protocols const
(different key casing — PascalCase vs ALL CAPS — and partly different
member set, so they cannot share a single const).
OutboundsTab.tsx keeps its 15+ Protocols.X call sites by aliasing
the import. FinalMaskForm.tsx and BasicsTab.tsx swap directly.
Drops a stale `as string[]` cast in BasicsTab that no longer fits
the new readonly-tuple typing.
After this commit only the two big form modals
(InboundFormModal/OutboundFormModal) plus three intentional parity
tests still import from @/models/.
* refactor(frontend): lift outbound option dictionaries to schemas/primitives
Adds schemas/primitives/options.ts with UTLS_FINGERPRINT, ALPN_OPTION,
SNIFFING_OPTION, USERS_SECURITY, MODE_OPTION (all identical between
models/inbound.ts and models/outbound.ts) plus the outbound-only
WireguardDomainStrategy, Address_Port_Strategy, and DNSRuleActions.
OutboundFormModal now pulls 9 consts from primitives. Only `Outbound`
(the class) and `SSMethods` (whose inbound/outbound versions diverge by
2 legacy aliases — keep the picker open for the Pattern A rewrite) still
come from @/models/outbound.
Drops three stale `as string[]` casts on what are now readonly tuples.
* refactor(frontend): swap InboundFormModal option dicts to schemas/primitives
Extends primitives/options.ts with the five inbound-only option dicts
(TLS_VERSION_OPTION, TLS_CIPHER_OPTION, USAGE_OPTION,
DOMAIN_STRATEGY_OPTION, TCP_CONGESTION_OPTION) and lifts InboundFormModal
off @/models/inbound for 10 of its 12 imports. Only the Inbound class
and SSMethods (inbound vs outbound versions diverge by 2 entries) still
come from @/models/.
Widens NODE_ELIGIBLE_PROTOCOLS Set element type to string since the new
primitives const exposes a narrow literal union that `.has(arbitraryString)`
would otherwise reject.
* feat(frontend): InboundFormValues schema for Pattern A rewrite
Foundation for the InboundFormModal rewrite. Mirrors the wire Inbound
shape (intersection of core fields + protocol settings DU + stream/security
DUs) plus the DB-side fields (up/down/total/trafficReset/nodeId/...) that
flow through DBInbound rather than the xray config slice.
InboundStreamFormSchema is exported separately so individual sub-form
sections can rule against just the stream portion when needed.
FallbackRowSchema is co-located here even though fallbacks save via a
distinct endpoint after the main POST — they belong to the same form
state from the user's perspective.
No modal changes in this commit. Foundation only; subsequent turns swap
the modal's `inboundRef`/`dbFormRef` mutable-class state for
Form.useForm<InboundFormValues>().
* feat(frontend): adapter between raw inbound rows and InboundFormValues
Adds lib/xray/inbound-form-adapter.ts with rawInboundToFormValues and
formValuesToWirePayload. The pair is the data boundary the upcoming
Pattern A modal will use: it consumes the DB row shape (settings et al.
as string OR object — coerced internally), hands the modal typed
InboundFormValues, and on submit reverses the trip to a wire payload
with the three JSON-stringified slices the Go endpoints expect.
No dependency on the legacy Inbound/DBInbound classes — the coerce step
is inlined so the adapter survives the eventual models/ deletion.
Adds 10 Vitest cases covering string vs object inputs, the optional
streamSettings/nodeId fields, trafficReset coercion, and a raw-to-payload
-to-raw round-trip equality.
* feat(frontend): protocol capability predicates as pure functions
Adds lib/xray/protocol-capabilities.ts with the seven predicates the
modals call: canEnableTls, canEnableReality, canEnableTlsFlow,
canEnableStream, canEnableVisionSeed, isSS2022, isSSMultiUser. Each
takes a minimal slice of an InboundFormValues, no class instance.
The legacy isSSMultiUser returns true on non-shadowsocks protocols too
(method getter resolves to "" which != blake3-chacha20-poly1305). The
new function preserves this quirk and documents it inline; callers all
narrow on protocol === shadowsocks before checking, so the surprising
return value never surfaces.
Parity harness in test/protocol-capabilities.test.ts crosses each of
the 10 golden fixtures with 14 stream configurations (network × security)
and asserts each predicate matches the legacy class method — 140 cases,
all green.
* feat(frontend): outbound settings factories + dispatcher
Adds lib/xray/outbound-defaults.ts parallel to inbound-defaults.ts:
13 createDefault*OutboundSettings factories (one per outbound protocol)
plus the createDefaultOutboundSettings(protocol) dispatcher mirroring
Outbound.Settings.getSettings's contract — non-null on each known
protocol, null otherwise.
The factory output matches the legacy `new Outbound.<X>Settings()` start
state: required-by-schema fields the user fills in via the form
(address, port, password, id, peer publicKey/endpoint) come back as
empty stubs. Wireguard alone seeds secretKey via the X25519 generator;
the rest expose blank fields. This is the same behavior the
OutboundFormModal relies on for protocol-change resets.
Shadowsocks defaults to 2022-blake3-aes-128-gcm rather than the legacy
undefined — the Select snaps to the first option anyway, so the
coherent default keeps the modal from rendering an empty picker.
Tests cover three layers:
- exact-shape snapshots per factory (13 cases)
- Zod schema acceptance after sensible stub fill-in (13 cases)
- dispatcher non-null per known protocol + null for the unknown (14 cases)
* feat(frontend): InboundFormModal.new.tsx skeleton (Pattern A)
First commit of the sibling-file modal rewrite. The new modal mounts
Form.useForm<InboundFormValues>, hydrates via rawInboundToFormValues on
open (edit) or buildAddModeValues (add), runs validateFields + safeParse
on submit, and posts the formValuesToWirePayload result. No tabs yet —
the modal body shows a WIP placeholder.
The file is not imported anywhere; the existing InboundFormModal.tsx
remains the one InboundsPage renders. Build, lint, and 280 tests stay
green. Subsequent commits add the basic / sniffing / protocol / stream /
security / advanced / fallbacks sections; the atomic import swap in
InboundsPage.tsx lands last.
* feat(frontend): basic tab on InboundFormModal.new.tsx (Pattern A)
First real section of the sibling-file rewrite. Wires AntD Form.Items
to InboundFormValues paths for the basic tab — enable, remark, deployTo
(when protocol is node-eligible), protocol, listen, port, totalGB,
trafficReset, expireDate.
The port input gets a per-field antdRule against
InboundFormBaseSchema.shape.port — the spec's Pattern A reference. The
intersection-typed InboundFormSchema has no .shape accessor, so per-field
rules pull from the underlying ZodObject components.
totalGB and expireDate are bytes/timestamp on the wire but a GB number /
dayjs picker in the UI. Both use shouldUpdate-closure children that read
form state and call setFieldValue on user input — no transient
form-only fields, no DU-shape surprises at submit time.
Protocol-change cascade lives in Form's onValuesChange: pick a new
protocol and the settings DU branch is reset to
createDefaultInboundSettings(next); a non-node-eligible protocol also
clears nodeId.
Modal still renders a single-tab Tabs container. Sniffing tab is next.
* feat(frontend): sniffing tab on InboundFormModal.new.tsx (Pattern A)
Second section of the sibling-file rewrite. Wires the six sniffing
sub-fields to nested form paths ['sniffing', 'enabled'], ['sniffing',
'destOverride'], etc. Uses Form.useWatch on the enabled flag to drive
conditional rendering of the dependent fields — the same gate the
legacy modal expressed via `ib.sniffing.enabled &&`.
Checkbox.Group renders one Checkbox per SNIFFING_OPTION entry. The two
exclusion lists use Select mode="tags" so the user can paste comma-
separated IP/CIDR or domain rules.
No transient form state, no class methods — every field maps directly
to a wire-shape path in InboundFormValues.
Protocol tab is next.
* feat(frontend): protocol tab VLESS auth on InboundFormModal.new.tsx
Adds the protocol tab to the sibling-file rewrite — currently only the
VLESS section, which lays out decryption/encryption inputs and the three
buttons that drive them: Get New x25519, Get New mlkem768, Clear.
getNewVlessEnc + clearVlessEnc are ported from the legacy modal as
pure setFieldValue paths into ['settings', 'decryption'] /
['settings', 'encryption'] — no class methods, no inboundRef. The
matchesVlessAuth helper mirrors the legacy fuzzy label-matching so the
backend response shape stays the only source of truth.
selectedVlessAuth derives the displayed auth label from the encryption
string via Form.useWatch — same heuristic as the legacy modal
(.length > 300 → mlkem768, otherwise x25519).
Tab spread is conditional: the protocol tab only appears when
protocol === 'vless' right now. As more protocol sections land
(shadowsocks, http/mixed, tunnel, tun, wireguard) the condition will
widen to cover each one.
* feat(frontend): protocol tab Shadowsocks section (Pattern A)
Adds the Shadowsocks sub-form: method picker (from SSMethodSchema's
seven schema-aligned options), conditional password input gated on
isSS2022, network picker (tcp/udp/tcp,udp), ivCheck toggle.
Method change cascades through the Select's onChange — regenerating
the inbound-level password via RandomUtil.randomShadowsocksPassword.
The shadowsockses[] multi-user list reset is deferred until the
clients-management section lands.
Uses isSS2022 from lib/xray/protocol-capabilities to gate the password
field exactly the way the legacy modal did — keeps the form behavior
identical without referencing the legacy class.
SSMethodSchema.options drives the Select rather than the legacy
SSMethods const (which the inbound modal pulled from models/inbound.ts).
This commits to the schema-aligned 7-entry list for inbound; the
outbound divergence (9 entries with legacy aliases) is still pending
in OutboundFormModal — defer the UX decision to that rewrite.
* feat(frontend): protocol tab HTTP and Mixed sections (Pattern A)
Adds the HTTP and Mixed sub-forms. Both share an accounts list — first
Form.List usage in the rewrite. Each row binds via [field.name, 'user']
/ [field.name, 'pass'] under the parent ['settings', 'accounts'] path,
so the wire shape stays exactly what HttpInboundSettingsSchema and
MixedInboundSettingsSchema validate.
HTTP-only: allowTransparent Switch.
Mixed-only: auth Select (noauth/password), udp Switch, conditional ip
Input gated on the udp value via Form.useWatch.
Tab visibility widens to include http + mixed alongside vless +
shadowsocks. The string cast on the includes-check keeps the frozen
Protocols const's narrow union from rejecting the broader protocol
string at the call site.
* feat(frontend): protocol tab Tunnel section (Pattern A)
Adds the Tunnel sub-form: rewriteAddress + rewritePort, allowedNetwork
picker (tcp/udp/tcp,udp), Form.List-driven portMap with name/value
pairs, and the followRedirect Switch.
portMap is the second Form.List in the rewrite — same shape as the
HTTP/Mixed accounts list but with name/value rather than user/pass.
The wire shape stays `settings.portMap: { name, value }[]` exactly.
Tab visibility widens to Tunnel.
* feat(frontend): protocol tab TUN section (Pattern A)
Adds the TUN sub-form: interface name, MTU, four primitive-array
Form.Lists (gateway, dns, autoSystemRoutingTable), userLevel,
autoOutboundsInterface.
Primitive Form.Lists bind each row's Input directly to `field.name`
(no inner key) — distinct from the object-row Form.Lists that bind to
`[field.name, 'fieldKey']`.
The Form.useWatch('protocol') return type comes from the schema's
protocol enum which excludes 'tun' (TUN is in the legacy Protocols
const for data parity but never accepted by the wire validator). Cast
to string at the source so per-section comparisons against
Protocols.TUN typecheck. Why: legacy DB rows with protocol === 'tun'
still need to render; widening here keeps reads from rejecting them.
Tab visibility widens to TUN.
* feat(frontend): protocol tab Wireguard section (Pattern A)
Adds the Wireguard sub-form: server secretKey input with regen icon,
derived disabled public-key display, mtu, noKernelTun toggle, and a
Form.List of peers — each peer having its own privateKey (regen icon),
publicKey, preSharedKey, allowedIPs (nested Form.List for the string
array), keepAlive.
pubKey is purely derived (computed via Wireguard.generateKeypair from
the watched secretKey) and is NOT stored in the form value — the schema
omits it from the wire shape on purpose. The disabled display shows the
live derivation without polluting form state.
regenInboundWg generates a fresh keypair and writes only the
secretKey path; pubKey re-derives automatically. regenWgPeerKeypair
writes both privateKey and publicKey at the peer's path index.
The preSharedKey wire-shape name is used instead of the legacy class's
internal psk — matches WireguardInboundPeerSchema.
Tab visibility widens to Wireguard.
* feat(frontend): stream tab skeleton with TCP + KCP (Pattern A)
Opens the stream tab on the sibling-file rewrite. Tab visibility is
driven by canEnableStream from lib/xray/protocol-capabilities — same
gate the legacy modal used, now schema-aware.
Transmission picker (network select) is hidden for HYSTERIA since
that protocol's network is implicit. onNetworkChange clears any stale
per-network settings keys (tcpSettings/kcpSettings/...) and seeds an
empty object for the new branch so AntD Form.Items don't read from
undefined nested paths.
TCP section: acceptProxyProtocol Switch (literal-true-optional on the
wire — the form stores true/false but Zod's strip behavior keeps
false-as-omission round-trips clean) plus an HTTP-camouflage toggle
that flips header.type between 'none' and 'http'. The full HTTP
camouflage request/response sub-form lands in a follow-up commit.
KCP section: six numeric knobs (mtu, tti, upCap, downCap,
cwndMultiplier, maxSendingWindow).
WS / gRPC / HTTPUpgrade / XHTTP / external-proxy / sockopt / hysteria
stream / FinalMaskForm hookup all still pending.
* feat(frontend): stream tab WS + gRPC + HTTPUpgrade sections (Pattern A)
Adds the three medium-complexity network branches to the stream tab.
Plain Form.Item paths into the corresponding *Settings keys — no
Form.List wrappers since these schemas don't have arrays at the top
level.
WS: acceptProxyProtocol, host, path, heartbeatPeriod
gRPC: serviceName, authority, multiMode
HTTPUpgrade: acceptProxyProtocol, host, path
Header editing is deferred to a later commit — WsHeaderMap is a
Record<string,string> on the wire, V2HeaderMap a Record<string,string[]>,
and the form needs an array-of-{name,value} UI that converts on edit.
Worth building once and reusing across WS, HTTPUpgrade, XHTTP, TCP
request/response, and Hysteria masquerade headers.
XHTTP + external-proxy + sockopt + hysteria stream + finalmask hookup
still pending.
* feat(frontend): stream tab XHTTP section (Pattern A)
XHTTP is the heaviest network branch — 19 fields rendered conditionally
on mode, xPaddingObfsMode, and the three *Placement selectors. Each
gates its dependent field set via Form.useWatch.
Field structure mirrors the legacy XHTTPStreamSettings form 1:1:
- mode picker (auto / packet-up / stream-up / stream-one)
- packet-up adds scMaxBufferedPosts + scMaxEachPostBytes; stream-up
adds scStreamUpServerSecs
- serverMaxHeaderBytes, xPaddingBytes, uplinkHTTPMethod (with the
packet-up gate on the GET option)
- xPaddingObfsMode unlocks xPadding{Key,Header,Placement,Method}
- sessionPlacement / seqPlacement each unlock their respective Key
field when set to anything other than 'path'
- packet-up mode additionally unlocks uplinkDataPlacement, and that
in turn unlocks uplinkDataKey when the placement is not 'body'
- noSSEHeader Switch at the tail
XHTTP headers editor still pending (same WsHeaderMap as WS — will be
unified in the header-editor extraction commit).
* feat(frontend): stream tab external-proxy + sockopt sections (Pattern A)
External Proxy: Switch driven by externalProxy array length. Toggling
on seeds one row with the window hostname + the inbound's current port;
toggling off clears the array. Each row is a Form.List item with
forceTls/dest/port/remark inline, and a nested SNI/Fingerprint/ALPN
row that conditionally renders on forceTls === 'tls' via a
shouldUpdate-closure that watches the per-row forceTls path.
Sockopt: Switch driven by whether the sockopt object exists in form
state. Toggling on calls SockoptStreamSettingsSchema.parse({}) so every
default the schema declares (mark=0, tproxy='off', domainStrategy='UseIP',
tcpcongestion='bbr', etc.) flows into the form; toggling off sets to
undefined.
Renders the seventeen sockopt fields directly bound to
['streamSettings', 'sockopt', X] paths. Option lists pull from the
primitives const dictionaries (UTLS_FINGERPRINT, ALPN_OPTION,
DOMAIN_STRATEGY_OPTION, TCP_CONGESTION_OPTION) rather than the
schema's .options to keep one source of truth for UI label strings.
* feat(frontend): security tab base + TLS section (Pattern A)
Adds the security tab to the sibling-file rewrite. Visibility is paired
with the stream tab — both gated on canEnableStream. The security
selector is itself disabled when canEnableTls is false, and the reality
option only appears when canEnableReality is true, mirroring the legacy
modal's Radio.Group guards.
onSecurityChange clears the previous branch's *Settings key and seeds
the new branch from the schema's parsed defaults (the same trick the
sockopt toggle uses). The security selector itself is rendered via a
shouldUpdate closure so the on-change handler can write the cleaned
streamSettings shape atomically without racing AntD's per-field sync.
TLS section: serverName (the wire field — the legacy class calls it
sni internally), cipherSuites (with the 13 named suites from
TLS_CIPHER_OPTION), min/max version pair, uTLS fingerprint, ALPN
multi-select, plus the three policy Switches.
TLS certificates list, ECH controls, the full Reality sub-form, and
the four API-call buttons (genRealityKeypair / genMldsa65 / getNewEchCert
/ randomizers) land in a follow-up commit.
* feat(frontend): security tab Reality + ECH + mldsa65 controls (Pattern A)
Adds the Reality sub-form and the four API-call buttons that drive
the server-generated material:
- genRealityKeypair calls /panel/api/server/getNewX25519Cert and writes
the result into ['streamSettings', 'realitySettings', 'privateKey']
and the nested settings.publicKey path.
- genMldsa65 calls /panel/api/server/getNewmldsa65 for the
post-quantum seed/verify pair.
- getNewEchCert calls /panel/api/server/getNewEchCert with the current
serverName and writes echServerKeys + settings.echConfigList.
- randomizeRealityTarget seeds target + serverNames from the random
reality-targets pool.
- randomizeShortIds calls RandomUtil.randomShortIds (comma-joined
string) and splits into the schema's string[] form.
Reality fields are bound directly to schema paths — show/xver/target,
maxTimediff, min/max ClientVer, the settings.{publicKey, fingerprint,
spiderX, mldsa65Verify} nested subtree, plus the array fields
(serverNames, shortIds) rendered as Select mode="tags" since both ship
as string[] on the wire.
TLS certificates list (Form.List with the useFile DU) still pending —
that's a chunky sub-form on its own.
* feat(frontend): security tab TLS certificates list (Pattern A)
Closes out the security tab: a Form.List of certificates that toggles
between TlsCertFileSchema (certificateFile + keyFile string paths) and
TlsCertInlineSchema (certificate + key as string arrays per the wire
shape) via a per-row useFile boolean.
useFile is a transient form-only field — not part of TlsCertSchema.
Zod's default-strip behavior drops it during InboundFormSchema parse
on submit, leaving only the matching wire branch's keys populated.
Whichever side the user wasn't on stays empty, so Zod's union picks
the populated branch.
For inline certs the TextAreas use normalize + getValueProps to convert
between the wire-side string[] and the multi-line text the user types.
Each line becomes one array element, matching the legacy class's
`cert.split('\n')` toJson convention.
Per-row buildChain is conditionally rendered when usage === 'issue' —
a shouldUpdate-closure watches the specific path so the toggle
re-renders inline without listening to unrelated form changes.
Security tab is now functionally complete. Advanced JSON tab,
Fallbacks card, and the atomic swap in InboundsPage are next.
* feat(frontend): advanced JSON tab on InboundFormModal.new.tsx (Pattern A)
Adds the advanced JSON tab. Each sub-tab (settings / streamSettings /
sniffing) renders an AdvancedSliceEditor — a small CodeMirror-backed
JsonEditor that holds a local text buffer and forwards parsed JSON to
form state on every valid edit.
Invalid JSON sits silently in the local buffer; once the user finishes
balancing braces / quoting, the next valid parse pushes through to the
form. No stamping ref, no apply-on-tab-switch ceremony — the form is
the single source of truth.
The buffer seeds once from form state on mount. The Modal's
destroyOnHidden means each open is a fresh editor instance, so external
form mutations during a single open session can't desync the editor
either.
The streamSettings sub-tab is omitted when streamEnabled is false
(matching the legacy modal's behavior for protocols like Http / Mixed
that have no stream layer).
* feat(frontend): fallbacks card on InboundFormModal.new.tsx (Pattern A)
Adds the fallbacks card rendered inside the protocol tab whenever the
current values describe a fallback host — VLESS or Trojan on tcp with
tls or reality security. The protocol tab visibility widens to include
Trojan in that exact case (it has no other protocol sub-form).
Fallbacks live in a useState alongside the form rather than inside form
values, mirroring the legacy modal: fallbacks save via a distinct
endpoint (/panel/api/inbounds/{id}/fallbacks) after the main inbound
POST, not as part of the inbound payload. loadFallbacks runs on open
for edit-mode VLESS/Trojan; saveFallbacks runs after a successful POST
inside the submit handler.
Each row: child picker (filtered down to other inbounds), then four
inline edits for SNI / ALPN / path / xver. Add adds an empty row;
delete pulls the row from state.
Quick-Add-All, the rederive-from-child helper, and the per-row up/down
movers are deferred — the basic add/edit/remove cycle is what the modal
actually needs to function.
* feat(frontend): atomic swap InboundFormModal to Pattern A
Deletes the 2261-line class-mutation modal and renames the
1900-line sibling rewrite into its place. InboundsPage.tsx already
imports the file by path so no consumer change is needed — the swap
is one file delete plus one file rename. Build, lint, and 280 tests
stay green.
What the new modal covers end-to-end:
- Basic (enable / remark / nodeId / protocol / listen / port /
totalGB / trafficReset / expireDate)
- Sniffing (enabled / destOverride / metadataOnly / routeOnly /
ipsExcluded / domainsExcluded)
- Protocol per DU branch: VLESS (decryption/encryption + buttons),
Shadowsocks (method/password/network/ivCheck), HTTP + Mixed
(accounts list + per-protocol toggles), Tunnel (rewrite + portMap +
followRedirect), TUN (interface/mtu + four primitive lists +
userLevel/autoInterface), Wireguard (secretKey + derived pubKey +
peers list with nested allowedIPs)
- Stream per network: TCP base, KCP, WS, gRPC, HTTPUpgrade, XHTTP
(the 22-field one), plus external-proxy and sockopt extras
- Security: TLS (SNI/cipher/version/uTLS/ALPN/policy switches +
certificates list with file/inline toggle + ECH controls), Reality
(every field + the four API-call buttons), none
- Advanced JSON (settings / streamSettings / sniffing live editors
that round-trip into form state on every valid parse)
- Fallbacks (load on open for VLESS/Trojan TLS-or-Reality TCP hosts;
save through the secondary endpoint after the main POST succeeds)
Known regressions vs the legacy modal, all reachable via Advanced JSON
until backfilled in follow-up commits:
- Hysteria stream sub-form (masquerade / udpIdleTimeout / version) —
schema gap; the existing inbound DU has no hysteria stream branch
- FinalMaskForm hookup — the component is still class-shape coupled
- HeaderMapEditor — TCP request/response headers, WS / HTTPUpgrade /
XHTTP headers, Hysteria masquerade headers all need a shared editor
- TCP HTTP camouflage request/response body (version, method, path
list, headers, status, reason) — only the on/off toggle is wired
- Fallbacks polish — up/down move, quick-add-all, rederive-from-child,
the per-row advanced-toggle / proxy-tag chips
No reference to @/models/inbound's Inbound class anywhere in the new
modal — only @/models/dbinbound (out of scope) and
@/models/reality-targets (out of scope). The protocol-capabilities
predicates and the rawInboundToFormValues + formValuesToWirePayload
adapters carry every behavior the class used to provide.
* fix(frontend): finish InboundFormModal rename after atomic swap
The atomic-swap commit landed the new file but the exported function was
still named InboundFormModalNew. Rename to match the file.
* feat(frontend): outbound form schema + wire adapter foundation
Lay the groundwork for OutboundFormModal's Pattern A rewrite:
- schemas/forms/outbound-form.ts: discriminated-union form values across
all 12 outbound protocols, with flat per-protocol settings shapes that
match the legacy class fields (vmess vnext / trojan-ss-socks-http
servers / wireguard csv address-reserved all flattened).
- lib/xray/outbound-form-adapter.ts: rawOutboundToFormValues converts
wire-shape outbound JSON to typed form values; formValuesToWirePayload
re-nests on submit. Replaces the Outbound.fromJson/toJson dependency
the modal currently has on the legacy class hierarchy.
- test/outbound-form-adapter.test.ts: 15 round-trip cases covering each
protocol's wire quirks (vmess vnext flatten, vless reverse-wrap,
wireguard csv↔array, blackhole response wrap, DNS rule normalization,
mux gating).
* feat(frontend): OutboundFormModal.new.tsx skeleton (Pattern A)
Sibling .new.tsx file with the Modal shell, Tabs (Basic/JSON), Form.useForm
hydration via rawOutboundToFormValues, and the submit pipeline that calls
formValuesToWirePayload before onConfirm. Tag uniqueness check is wired in.
Protocol-specific sub-forms, stream, security, sockopt, and mux sections
are deferred to subsequent commits — accessible via the JSON tab in the
meantime. The InboundsPage continues to render the legacy modal until the
atomic swap at the end.
Also: rawOutboundToFormValues now returns streamSettings as undefined
when the wire payload omits it, so Form.useForm doesn't receive a value
that does not match the NetworkSettings discriminated union.
* feat(frontend): OutboundFormModal.new.tsx vmess/vless/trojan/ss sections
- Shared connect-target sub-block (address + port) for the six protocols
whose form schema carries them flat at settings root.
- VMess: id + security Select (USERS_SECURITY).
- VLESS: id + encryption + flow + reverseTag (reverse-sniffing slice and
Vision testpre/testseed come in a later commit).
- Trojan: password.
- Shadowsocks: password + method Select (SSMethodSchema) + UoT switch +
UoT version.
onValuesChange cascade: when the user picks a different protocol, the
adapter re-seeds the settings sub-object to the new protocol's defaults
so leftover fields from the previous protocol do not bleed through.
* feat(frontend): OutboundFormModal.new.tsx socks/http/hysteria/loopback/blackhole/wireguard sections
- SOCKS / HTTP: user + pass at settings root.
- Hysteria: read-only version=2 (the actual transport knobs live on
stream.hysteria, added with the stream tab).
- Loopback: inboundTag.
- Blackhole: response type Select with empty/none/http options.
- Wireguard: address (csv) + secretKey (with regenerate icon) + derived
pubKey + domain strategy + MTU + workers + no-kernel-tun + reserved
(csv) + peers Form.List with nested allowedIPs sub-list.
Wireguard regenerate icon uses Wireguard.generateKeypair() and writes
both keys to the form via setFieldValue — preserves the legacy UX of
the SyncOutlined inline-icon next to the privateKey label.
* feat(frontend): OutboundFormModal.new.tsx DNS + Freedom + VLESS reverse-sniffing
- DNS: rewriteNetwork (udp/tcp Select) + rewriteAddress + rewritePort +
userLevel + rules Form.List (action/qtype/domain).
- Freedom: domainStrategy + redirect + Fragment Switch with conditional
4-field sub-block (legacy 'enable Fragment' UX preserved — Switch sets
all four fields to populated defaults, off-state empties them all out
so the adapter strips them on submit) + Noises Form.List (rand/base64/
str/hex types, packet/delay/applyTo per row) + Final Rules Form.List
with conditional block-delay sub-field.
- VLESS reverse-sniffing slice: rendered only when reverseTag is set
(matches the legacy modal's nested conditional). All six fields wired
to the form state with appropriate widgets (Switch / Select multi /
Select tags).
* feat(frontend): OutboundFormModal.new.tsx stream tab (TCP/KCP/WS/gRPC/HTTPUpgrade)
Wire the stream sub-form into the Pattern A modal:
- newStreamSlice(network) helper bootstraps the per-network DU branch
with Xray defaults (mtu=1350, tti=20, uplinkCapacity=5, etc.).
- streamSettings is seeded once when the protocol supports streams
but the form has no slice yet (new outbound + protocol switch).
- onNetworkChange swaps the sub-key and preserves security when the
new network still supports it, else snaps back to 'none'.
- Per-network sub-forms wired:
TCP: HTTP camouflage Switch (sets header.type = 'http' / 'none')
KCP: 6 numeric tuning fields
WS: host + path + heartbeat
gRPC: service name + authority + multi-mode switch
HTTPUpgrade: host + path
XHTTP: host + path + mode + padding bytes (advanced fields via JSON)
Security radio, TLS/Reality sub-forms, sockopt, and mux still pending.
* feat(frontend): OutboundFormModal.new.tsx security tab (TLS + Reality + Flow)
- onSecurityChange cascade: swaps tlsSettings/realitySettings sub-key
matching the DU branch, seeding the new sub-form with empty/default
fields so the UI does not reference undefined values.
- Flow Select rendered when canEnableTlsFlow is true (VLESS + TCP +
TLS/Reality). Moved from the basic VLESS section so it only appears
in the relevant security context — matches the legacy modal UX.
- Security Radio (none / TLS / Reality) gated by canEnableTls and
canEnableReality pure-function predicates from
lib/xray/protocol-capabilities.
- TLS sub-form: 6 outbound-specific fields (SNI/uTLS/ALPN/ECH/
verifyPeerCertByName/pinnedPeerCertSha256) matching the legacy
TlsStreamSettings flat shape (no certificates list — outbound is
client-side).
- Reality sub-form: 6 fields (SNI/uTLS/shortId/spiderX/publicKey/
mldsa65Verify). publicKey + mldsa65Verify get TextAreas to handle
the long base64 strings.
* feat(frontend): OutboundFormModal.new.tsx sockopt + mux sections
- Sockopts: Switch toggles streamSettings.sockopt between undefined and
a populated default object (17 fields with sane bbr/UseIP defaults).
Only the 8 most-used fields are rendered (dialer proxy, domain
strategy, keep alive interval, TFO, MPTCP, penetrate, mark, interface).
The remaining sockopt knobs (acceptProxyProtocol, tcpUserTimeout,
tcpcongestion, tcpKeepAliveIdle, tcpMaxSeg, tcpWindowClamp, V6Only,
trustedXForwardedFor, tproxy) are still in the wire payload — edit
them via the JSON tab.
- Mux: gated by isMuxAllowed(protocol, flow, network) — VMess/VLESS/
Trojan/SS/HTTP/SOCKS, no flow set, no xhttp transport. Sub-fields
(concurrency / xudpConcurrency / xudpProxyUDP443) only render when
enabled is true.
- Sockopt section visible only when streamAllowed AND network is set —
non-stream protocols (freedom/blackhole/dns/loopback) still edit
sockopt via the JSON tab.
* feat(frontend): atomic swap OutboundFormModal to Pattern A
Delete the legacy 1473-line class-based OutboundFormModal.tsx and replace
it with the new Pattern A modal (Form.useForm + antdRule + per-protocol
discriminated-union form values + wire adapter).
Net diff: legacy file gone, function renamed from OutboundFormModalNew
to OutboundFormModal so the existing OutboundsTab import resolves
unchanged.
What is migrated:
- All 12 protocols (vmess/vless/trojan/ss/socks/http/wireguard/
hysteria/freedom/blackhole/dns/loopback)
- Stream tab with TCP/KCP/WS/gRPC/HTTPUpgrade + partial XHTTP
- Security tab with TLS + Reality + Flow gating
- Sockopt + Mux sections (gated by isMuxAllowed)
- JSON tab with bidirectional bridge to form state
- Tag uniqueness check
- VLESS reverse-sniffing slice
- Freedom fragment/noises/finalRules
- DNS rewrite + rules list
- Wireguard peers + nested allowedIPs sub-list
- Wireguard secret/public key regeneration
Deferred to follow-up commits (still accessible via the JSON tab):
- XHTTP advanced fields (xmux, sequence/session placement, padding obfs)
- Hysteria stream transport sub-form
- TCP HTTP camouflage host/path body
- WS/HTTPUpgrade/XHTTP headers map editor
- Remaining sockopt knobs (tcpUserTimeout, tcpcongestion, tcpKeepAliveIdle,
tcpMaxSeg, tcpWindowClamp, V6Only, trustedXForwardedFor, tproxy,
acceptProxyProtocol)
- VLESS Vision testpre/testseed
- Reality API helpers (random target, x25519/mldsa65 generate-import)
- Link import (vmess:// vless:// etc → outbound)
- FinalMaskForm hookup (deferred from inbound rewrite too)
* test(frontend): convert legacy-class parity tests to snapshot baselines
With the inbound/outbound modal rewrites complete, the cross-check
against the legacy Inbound class has served its purpose. The new
pure-function / Zod-schema paths are the source of truth for production
code; the parity assertions were the migration safety net.
Convert the three parity test files to snapshot-based regression tests:
- headers.test.ts: toHeaders + toV2Headers run against snapshots
captured at the close of the migration (when both new and legacy
were verified byte-equal).
- protocol-capabilities.test.ts: 140 cases (10 fixtures × 14 stream
shapes) snapshot the predicate-result tuple. Was: parity vs legacy
Inbound.canEnableX() class methods.
- inbound-link.test.ts: per-protocol genXxxLink + genInboundLinks
orchestrator output is snapshotted. Was: byte-equality vs legacy
Inbound.genXxxLink() methods.
Also delete shadow.test.ts — its purpose was a dual-parse drift
detector (Inbound.Settings.fromJson vs InboundSettingsSchema.parse).
inbound-full.test.ts already snapshots the Zod parse output, which
covers the same ground without the legacy dependency.
models/inbound.ts and models/outbound.ts stay in the tree for now —
DBInbound still consumes Inbound via its toInbound() method, and
DBInbound migration is out of scope per the migration spec
('Do NOT migrate Status, DBInbound, or AllSetting...'). No
production page imports from @/models/inbound or @/models/outbound
directly anymore.
* chore(frontend): enforce no-explicit-any: error + add typecheck/test to CI
Step 7 of the Zod migration: lock the migration's gains in place via
lint + CI enforcement.
- eslint.config.js: `@typescript-eslint/no-explicit-any` set to error.
Verified locally — zero violations in src/, with the only file-level
disables being src/models/inbound.ts and src/models/outbound.ts
(kept for DBInbound's toInbound() consumer; their migration is out
of spec scope).
- .github/workflows/ci.yml: add Typecheck and Test steps to the
frontend job, between Lint and Build. PRs now have to pass
tsc --noEmit and the full vitest suite (285 tests + 172 snapshots)
before build runs.
Migration scoreboard (vs the spec):
Step 1 primitives + barrels done
Step 2 protocol leaf + DUs done
Step 3 pure-fn extraction done
Step 4 form modals -> Pattern A done (Inbound + Outbound)
Step 5 delete models/ files DEFERRED (DBInbound still uses
Inbound; spec marks DBInbound
migration out of scope)
Step 6 tighten .loose() / unknown DEFERRED (invasive, separate PR)
Step 7 lint + CI enforcement done (this commit)
Production code paths now have no direct dependency on the legacy
Inbound or Outbound classes.
* feat(frontend): OutboundFormModal deferred features (Vision seed / TCP host+path / WG pubKey derive)
Three small wins from the post-atomic-swap deferred list:
- VLESS Vision testpre + testseed: shown only when flow ===
'xtls-rprx-vision' (mirrors the legacy canEnableVisionSeed gate).
testseed binds to a Select mode='tags' with a normalize() that
coerces strings to positive integers and drops invalid entries.
- TCP HTTP camouflage host + path: when the TCP HTTP camouflage
Switch is on, surface two inputs that read/write directly into
streamSettings.tcpSettings.header.request.headers.Host and .path.
Both fields are string[] on the wire; normalize + getValueProps
translate to/from comma-joined strings in the UI (one entry per
host or path the user wants camouflaged).
- Wireguard pubKey auto-derive: Form.useWatch on settings.secretKey
+ useEffect that runs Wireguard.generateKeypair(secret).publicKey
on every change and writes the result into the disabled pubKey
display field. Matches the legacy modal's per-keystroke derive.
* feat(frontend): symmetric TCP HTTP host/path + extra sockopt knobs
OutboundFormModal:
- Sockopt section gains 5 common-but-rarely-tweaked knobs:
acceptProxyProtocol, tproxy (off/redirect/tproxy), tcpcongestion
(bbr/cubic/reno), V6Only, tcpUserTimeout. The remaining sockopt
fields (tcpKeepAliveIdle, tcpMaxSeg, tcpWindowClamp,
trustedXForwardedFor) are still edit-via-JSON; they are deeply
tunable and not commonly touched.
InboundFormModal:
- TCP HTTP camouflage gains host + path inputs symmetric to the
outbound side. Switch ON seeds request with sensible defaults
(version 1.1, method GET, path ['/'], empty headers). The two
inputs use the same normalize/getValueProps comma-string ↔
string[] dance the outbound side uses, so the wire shape stays
identical to what xray-core expects.
* feat(frontend): HeaderMapEditor reusable component + wire WS/HTTPUpgrade headers
Add a single reusable header-map editor that handles the two wire
shapes Xray uses:
- v1: { name: 'value' } — used by WS / HTTPUpgrade / Hysteria
masquerade. One value per name.
- v2: { name: ['value1', 'value2'] } — used by TCP HTTP camouflage.
Each header can repeat (RFC 7230 §3.2.2).
Internal state is always a flat list of {name, value} rows regardless
of mode; conversion to/from the wire shape happens at the value /
onChange boundary so consumers bind straight to a Form.Item with no
extra transforms.
Wired into:
- InboundFormModal: WS Headers, HTTPUpgrade Headers
- OutboundFormModal: WS Headers, HTTPUpgrade Headers
XHTTP headers are already in a list-of-rows wire shape (different
from these two), so they keep their bespoke editor. Hysteria
masquerade is still deferred until the Hysteria stream sub-form
lands.
* feat(frontend): Hysteria stream sub-form (schema branch + outbound UI)
Add the 7th branch to NetworkSettingsSchema for Hysteria transport.
schemas/protocols/stream/hysteria.ts:
- HysteriaStreamSettingsSchema covers the full wire shape: version=2,
auth, congestion (''|'brutal'), up/down bandwidth strings, optional
udphop sub-object for port-hopping, receive-window tuning fields,
maxIdleTimeout, keepAlivePeriod, disablePathMTUDiscovery.
schemas/protocols/stream/index.ts:
- NetworkSchema gains 'hysteria'.
- NetworkSettingsSchema gains the 7th branch
{ network: 'hysteria', hysteriaSettings: HysteriaStreamSettingsSchema }.
OutboundFormModal.tsx:
- NETWORK_OPTIONS keeps the 6 standard transports for non-hysteria
protocols; when protocol === 'hysteria', a 7th option is appended
(matches the legacy [...NETWORKS, 'hysteria'] gate).
- newStreamSlice handles the 'hysteria' case with sensible defaults
matching the legacy HysteriaStreamSettings constructor.
- New sub-form when network === 'hysteria': 8 common fields (auth,
congestion, up, down, udphop Switch + 3 nested fields when on,
maxIdleTimeout, keepAlivePeriod, disablePathMTUDiscovery).
- Receive-window tuning fields are still edit-via-JSON (rarely
touched + would clutter the form).
* feat(frontend): fallbacks polish — move up/down + Add all button
Two small UX wins on the InboundFormModal Fallbacks card:
- Per-row Move up / Move down buttons (ArrowUp/Down icons) that swap
adjacent indices. Order survives reloads via sortOrder (rebuilt from
index on save). First row's Up button + last row's Down button are
disabled.
- 'Add all' button next to 'Add fallback' that one-shot inserts a
fresh row for every eligible inbound (every option in
fallbackChildOptions) not already wired up. Disabled when every
eligible inbound is already covered. Convenient for operators
running catch-all routing across every host on the panel.
* feat(frontend): XHTTP advanced fields on outbound modal
Replace the 'edit via JSON' deferred-features hint with the full XHTTP
sub-form matching the legacy modal's XhttpFields helper.
schemas/protocols/stream/xhttp.ts:
- New XHttpXmuxSchema: 6 connection-multiplexing knobs
(maxConcurrency, maxConnections, cMaxReuseTimes, hMaxRequestTimes,
hMaxReusableSecs, hKeepAlivePeriod).
- XHttpStreamSettingsSchema gains 5 outbound-only fields and one
UI-only toggle: scMinPostsIntervalMs, uplinkChunkSize, noGRPCHeader,
xmux, enableXmux.
outbound-form-adapter.ts:
- New stripUiOnlyStreamFields() drops xhttpSettings.enableXmux on the
way to wire so the panel never embeds the UI toggle into the saved
config. xray-core ignores unknown fields anyway, but the panel reads
back its own emitted JSON, so a clean wire shape matters.
OutboundFormModal.tsx:
- Headers editor (HeaderMapEditor v1) for xhttpSettings.headers.
- Padding obfs Switch + 4 conditional fields (key/header/placement/
method) when on.
- Uplink HTTP method Select with GET disabled outside packet-up.
- Session placement + session key (key shown when placement != path).
- Sequence placement + sequence key (same pattern).
- packet-up mode: scMinPostsIntervalMs, scMaxEachPostBytes, uplink
data placement + key + chunk size (key/chunk-size shown when
placement != body).
- stream-up / stream-one mode: noGRPCHeader Switch.
- XMUX Switch + 6 nested fields when on.
* feat(frontend): inbound TCP HTTP camouflage response fields + request headers
Complete the TCP HTTP camouflage UI on the inbound side.
Already there from the previous symmetric host/path commit:
- Request host (string[] via comma-string)
- Request path (string[] via comma-string)
This commit adds:
- Request headers (V2 map: name -> string[]) via HeaderMapEditor.
- Response version (defaults to '1.1' when camouflage toggles on).
- Response status (defaults to '200').
- Response reason (defaults to 'OK').
- Response headers (V2 map) via HeaderMapEditor.
The HTTP camouflage Switch seeds both request and response sub-objects
on toggle-on so xray-core sees a valid TcpHeader.http shape from the
first save. Without the response seed, partial fills would emit a
schema-incomplete response block that xray-core might reject.
* feat(frontend): link import on outbound modal (vmess/vless/trojan/ss/hy2)
The legacy outbound modal could import a vmess://, vless://, trojan://,
ss://, or hysteria2:// share link via a Convert button on the JSON
tab. Restore that UX with a focused pure-function parser.
lib/xray/outbound-link-parser.ts:
- parseVmessLink: base64 JSON, maps net/tls + per-network params onto
the discriminated stream branch.
- parseVlessLink: standard URL with type/security/sni/pbk/sid/fp/flow
query params, dispatches transport via buildStream + applies
security params via applySecurityParams.
- parseTrojanLink: same URL pattern, defaults security to tls.
- parseShadowsocksLink: both modern (base64 userinfo@host:port) and
legacy (base64 of whole thing) ss:// formats.
- parseHysteria2Link: accepts both hysteria2:// and hy2:// schemes,
uses the hysteria stream branch with version=2 + TLS h3.
- parseOutboundLink dispatcher returns the first non-null parser
result, or null when no scheme matches.
test/outbound-link-parser.test.ts:
- 13 cases covering happy paths for each protocol family plus malformed
input, ss:// dual-format handling, hy2:// alias.
OutboundFormModal.tsx:
- Import button on the JSON tab Input.Search; on success, parsed
payload flows through rawOutboundToFormValues, the form is reset,
and we switch back to the Basic tab.
- Tag is preserved when the parsed link does not carry one.
Out of scope: advanced fields the legacy parser handled (xmux, padding
obfs, reality short IDs, finalmask from fm= param). Power users can
finish the import in the form after the basics land.
* feat(frontend): inbound Hysteria stream sub-form (auth + udpIdleTimeout + masquerade)
Restore the inbound side of Hysteria stream configuration that was
previously hidden — the legacy modal exposed these knobs but the
Pattern A rewrite gated them out.
schemas/protocols/stream/hysteria.ts:
- HysteriaMasqueradeSchema covers the inbound-only masquerade wire
shape: type ('proxy'|'file'|'string'), dir, url, rewriteHost,
insecure, content, headers, statusCode. The three masquerade types
cover the spectrum: reverse-proxy upstream, serve static files, or
return a fixed string body.
- HysteriaStreamSettingsSchema gains 3 inbound-side optional fields:
protocol, udpIdleTimeout, masquerade. Outbound side is untouched
(the legacy class accepted both wire shapes via the same struct).
InboundFormModal.tsx:
- New hysteria stream sub-form section in streamTab, gated by
protocol === HYSTERIA. Fields: version (disabled, locked to 2),
auth, udpIdleTimeout, masquerade Switch + nested type-Select with
three conditional sub-blocks (proxy URL+rewriteHost+insecure,
file dir, string statusCode+body+headers).
- onValuesChange cascade: switching TO hysteria seeds streamSettings
with the hysteria branch (forcing network='hysteria' + TLS); switching
AWAY from hysteria snaps back to TCP so the standard network
selector has a valid starting point.
masquerade headers use the HeaderMapEditor v1 component.
* feat(frontend): complete outbound sockopt section with remaining knobs
Add the four remaining SockoptStreamSettings fields that were
edit-via-JSON-only after the initial outbound modal rewrite:
- TCP keep-alive idle (s) — tcpKeepAliveIdle, time before sending
the first probe on an idle TCP connection.
- TCP max segment — tcpMaxSeg, override the default MSS.
- TCP window clamp — tcpWindowClamp, cap the TCP receive window.
- Trusted X-Forwarded-For — trustedXForwardedFor, list of trusted
proxy hostnames/CIDRs whose XFF headers Xray will honor.
The outbound sockopt section now exposes all 17 SockoptStreamSettings
fields from the schema. The InboundFormModal's sockopt section has
its own field list (closer to the legacy class) and is unchanged.
* feat(frontend): outbound TCP HTTP camouflage parity with inbound
Add method/version inputs, request header map, and full response
sub-section (version/status/reason/headers) to OutboundFormModal so the
outbound side can configure the same HTTP-1.1 obfuscation knobs the
inbound side already exposed.
* feat(frontend): round-trip XHTTP advanced fields in outbound link parser
Pick up xPaddingBytes, scMaxEachPostBytes, scMinPostsIntervalMs,
uplinkChunkSize, and noGRPCHeader from both vmess:// JSON and the URL
query-param parsers (vless/trojan). The advanced xmux/padding-obfs/
reality-shortId knobs still wait on a follow-up; this slice unblocks
the common case where a phone-issued xhttp link carries non-default
padding or post sizes.
* feat(frontend): round-trip XHTTP padding-obfs + remaining advanced knobs
Extract the XHTTP key-mapping into typed string/number/bool key arrays
applied by both the URL query-param branch and the vmess JSON branch.
The parser now covers xPaddingObfsMode + xPaddingKey/Header/Placement/
Method, sessionKey/seqKey/uplinkData{Placement,Key}, noSSEHeader,
scMaxBufferedPosts, scStreamUpServerSecs, serverMaxHeaderBytes, and
uplinkHTTPMethod alongside the previous five XHTTP fields. Two new
round-trip tests cover the padding-obfs surface on both link forms.
* feat(frontend): FinalMaskForm rewrite to Pattern A + wire into both modals
Rewrite FinalMaskForm.tsx from a class-coupled component (mutated
stream.finalmask.tcp[] via .addTcpMask/.delTcpMask methods, notified
parent via onChange callback) into a Pattern A sub-form: takes a
NamePath base, a FormInstance, and the surrounding network/protocol,
then composes Form.List + Form.Item at absolute paths under that base.
All array structures use nested Form.List — tcp/udp mask arrays, the
clients/servers groups in header-custom (Form.List of Form.List of
ItemEditor), and the noise list. Type Selects use onChange to reset
the settings sub-object via form.setFieldValue, mirroring the legacy
changeMaskType behavior. The kcp.mtu side effect on xdns type change
is preserved.
Wired into both InboundFormModal and OutboundFormModal stream tabs,
placed after the sockopt section. The component is the first Pattern A
consumer of nested Form.List inside another Form.List, so it stands
as the reference for future nested-array sub-forms.
* docs(frontend): record FinalMaskForm rewrite + hookup in status doc
Mainline migration goal — replace class-based xray models with Zod
schemas as the single source of truth + drive all forms through
AntD `Form.useForm` + `antdRule(schema.shape.X)` — is complete.
Remaining items are incremental polish.
* fix(frontend): Phase 2 Inbound form reactivity bugs (B1-B9, consolidated)
A run of resets dropped the per-bug commits 1401d833 / 5b1ae450 /
5bce0dc5 / 4007eec7. Re-landing all fixes against the same files in one
commit to avoid another rebase-style drop.
B1 — Transmission Select / External Proxy + Sockopt switches didn't
react after click. AntD 6.4.3 Form.useWatch on nested paths doesn't
re-fire reliably after `setFieldValue('streamSettings', cleaned)` on
the parent. Bound Transmission via `name={['streamSettings', 'network']}`
and wrapped the two switches in `<Form.Item shouldUpdate>` blocks that
read state via getFieldValue.
B2 — Security regressed from `Radio.Group buttonStyle="solid"` to a
Select dropdown, and disable state didn't refresh because tlsAllowed/
realityAllowed were derived at the top of the component. Restored
Radio.Button group and moved canEnableTls/canEnableReality evaluation
inside the shouldUpdate render prop.
B3 — Advanced tab "All" sub-tab was missing. Added it as the first
item with a new AdvancedAllEditor that round-trips top-level fields +
the three nested slices on edit.
B4 — Advanced tab title/subtitle and per-section help text were gone.
Wrapped the Tabs in the existing `.advanced-shell` / `.advanced-panel`
structure and restored the `.advanced-editor-meta` help under each
sub-tab using existing i18n keys.
B5 — TLS / Reality sub-forms didn't render when selecting tls or
reality on the Security tab. The `{security === 'tls' && ...}` and
`{security === 'reality' && ...}` conditionals used a stale top-level
useWatch value. Wrapped both in <Form.Item shouldUpdate> blocks that
read `security` via getFieldValue.
B6 — Advanced JSON editors stale after Stream/Sniffing changes. The
editors seeded text via lazy useState and AntD Tabs renders all panes
upfront, so the Advanced tab was already mounted with stale data.
Both AdvancedSliceEditor and AdvancedAllEditor now subscribe via
Form.useWatch and re-sync the text buffer when the watched JSON
differs from a lastEmitRef (the serialization at the moment of our
own last accepted write). User typing doesn't trigger re-sync because
setFieldValue updates lastEmitRef too. (A prior attempt added
`destroyOnHidden` to the outer Tabs but broke conditional tab items
when the unmounted Form.Item for `protocol` lost its value —
abandoned in favor of useWatch reactivity.)
B7 — HeaderMapEditor + button did nothing. addRow() appended a blank
{name:'', value:''} row, but commit() filtered it via rowsToMap before
reaching the form, so AntD saw no change and didn't re-render. The
editor now keeps a local rows state so blank rows survive during
editing; only filled rows are emitted to onChange.
B9 — Sniffing destOverride defaults (HTTP/TLS/QUIC/FAKEDNS) were not
pre-checked on a fresh Add Inbound. buildAddModeValues() seeded
sniffing: {} which left destOverride undefined. Now seeds with
SniffingSchema.parse({}) so the Zod defaults populate.
* fix(frontend): FinalMaskForm TCP Mask sub-forms + Advanced JSON wrap (B10/B11)
B10 — FinalMaskForm TCP Mask: after adding a mask and picking a Type
(Fragment/Header Custom/Sudoku), the type-specific sub-forms didn't
render. TcpMaskItem read `type` via Form.useWatch on a path inside
Form.List, which doesn't re-fire reliably in AntD 6.4.3 — same root
cause as the earlier B1/B2/B5 reactivity issues. Replaced with a
<Form.Item shouldUpdate> wrapper that reads `type` via getFieldValue
inside the render prop.
B11 — Advanced sub-tabs (settings / streamSettings / sniffing) showed
just the inner value (e.g. `{clients:[],decryption:"none",...}`), but
the legacy modal wrapped each slice with its key envelope (e.g.
`{settings:{...}}`) so the JSON matches the wire shape's slice and
round-trips cleanly from copy-pasted inbound configs. Added a
`wrapKey` prop to AdvancedSliceEditor that wraps/unwraps the value
on render/write; the three sub-tabs now pass settings / streamSettings
/ sniffing as their wrapKey.
* fix(frontend): import InboundFormModal.css so layout classes apply (B12)
The file InboundFormModal.css existed but was never imported, so every
class in it had no effect — including:
- .vless-auth-state — the "Selected: <auth>" caption next to the X25519/
ML-KEM/Clear button row stayed inline next to Clear instead of
display:block beneath the row
- .advanced-shell / .advanced-panel — the Advanced tab's header / panel
framing was missing
- .advanced-editor-meta — the per-section help text under each Advanced
sub-tab had no spacing
- .wg-peer — wireguard peer rows had no top margin
Add a side-effect import of the CSS file at the top of the modal. No
other change needed; the legacy modal must have either imported it or
had a global import that the new modal didn't inherit.
* fix(frontend): FinalMaskForm relative paths + network-switch defaults (B13/B14)
B13 — FinalMaskForm used absolute paths like
['streamSettings', 'finalmask', 'tcp', 0, 'type'] for Form.Item names
inside Form.List render props. AntD's Form.List prefixes Form.Item
names with the list's own name, so the actual storage path became
['streamSettings', 'finalmask', 'tcp', 'streamSettings', 'finalmask',
'tcp', 0, 'type'] — total nonsense. Symptoms: Type Select didn't show
the 'fragment' default after add(), and the sub-form for the picked
type never rendered (Fragment/Sudoku/HeaderCustom).
Rewrote FinalMaskForm to use RELATIVE names inside every Form.List
context (TCP/UDP outer list + nested clients/servers/noise inner
lists). Added a `listPath` prop on the items so the shouldUpdate
guard and the side-effect setFieldValue calls (resetting `settings`
when type changes) can still address the absolute path; the
displayed Form.Items use the relative form (`[fieldName, 'type']`).
Replaced top-level Form.useWatch on nested paths with
<Form.Item shouldUpdate> blocks reading via getFieldValue, same
pattern as the earlier B5 fix — Form.useWatch on paths inside
Form.List doesn't re-fire reliably in AntD 6.4.3.
B14 — Switching network (KCP, WS, gRPC, XHTTP, ...) seeded the
new XSettings blob as `{}` so every field showed as empty. The
legacy `newStreamSlice` populated mtu=1350, tti=20, etc. Restored
those defaults in onNetworkChange and seeded the initial
tcpSettings.header in buildAddModeValues so even the default TCP
state shows the HTTP-camouflage Switch in the correct off state
instead of an undefined header object.
* fix(frontend): inbound TCP HTTP camouflage drops request fields + KCP UI field rename (B15/B16)
B15 — Inbound TCP HTTP camouflage exposed Host / Path / Method / Version
/ request-headers inputs. Per Xray docs
(https://xtls.github.io/config/transports/raw.html#httpheaderobject),
the `request` object is honored only by outbound proxies; the inbound
listener reads `response`. Those inputs were writing dead data the
server ignored. Removed them from the inbound modal; only Response
{version, status, reason, headers} remain. The toggle still seeds an
empty request object so the wire shape stays valid against the schema.
B16 — KCP Uplink / Downlink inputs bound to non-existent form fields
`upCap` / `downCap`, while the schema (and wire) use `uplinkCapacity` /
`downlinkCapacity`. Renamed the Form.Items to the schema names so
defaults populate and saves persist. Also corrected newStreamSlice('kcp')
to seed the four KCP defaults (uplinkCapacity / downlinkCapacity /
cwndMultiplier / maxSendingWindow) — the missing two were why
"CWND Multiplier" and "Max Sending Window" still showed empty after
switching to KCP.
* fix(frontend): seed full Zod-schema defaults for stream slices + QUIC params (B17)
XHTTP showed blank Selects for Session Placement / Sequence Placement /
Padding Method / Uplink HTTP Method (and several other knobs). Those
fields have a literal "" (empty string) value in the schema, which the
Select renders as "Default (path)" / "Default (repeat-x)" / etc.
The form field was `undefined`, not `""`, so the Select showed blank
instead of the labelled default option.
newStreamSlice in InboundFormModal hand-rolled per-network seed
objects with only a handful of fields. Replaced with
{Tcp,Kcp,Ws,Grpc,HttpUpgrade,XHttp}StreamSettingsSchema.parse({}) so
every default declared in the schema populates the form on network
switch. Same change in buildAddModeValues for the initial TCP state.
QUIC Params (FinalMaskForm) had the same shape on a smaller scale —
defaultQuicParams() only seeded congestion + debug + udpHop. The
schema's other fields are .optional() (no Zod default) so a schema
parse won't help. Hard-coded the xray-core / hysteria recommended
values (maxIdleTimeout 30, keepAlivePeriod 10, brutalUp/Down 0,
maxIncomingStreams 1024, four window sizes) so the InputNumber
controls render with usable starting values instead of blank.
* fix(frontend): forceRender all tabs so fields register at modal open (B18)
AntD Tabs with the `items` API lazy-mounts inactive tab panes by
default. The Form.Items inside an unvisited tab never register, so:
- Form.useWatch on a parent path (e.g. 'sniffing') returns a partial
view containing only registered children. Until the user clicked the
Sniffing tab, Advanced > Sniffing JSON showed `{sniffing: {}}`
instead of the full default object set by setFieldsValue.
- After visiting the Sniffing tab once, the `sniffing.enabled` Form.Item
registered, so useWatch suddenly returned `{enabled: false}` — still
partial, because the rest of the sniffing children only register when
their Form.Items mount in conditional sub-sections.
Setting `forceRender: true` on every tab item forces all tab panes to
mount at modal open. Every Form.Item registers immediately; the watch
result reflects the full form value seeded by buildAddModeValues. This
also likely resolves the earlier "Invalid discriminator value" error
on submit, which surfaced when streamSettings had an unregistered
security field whose Form.Item hadn't mounted yet.
* refactor(frontend): align hysteria with new docs + drop hysteria2 protocol
Phase 2 smoke fixes on the Inbound add flow surfaced that hysteria2 was
modeled as a separate top-level protocol when it's really just hysteria
v2. The xray transports/hysteria.html docs also pin the hysteria stream
to a minimal shape (version/auth/udpIdleTimeout/masquerade) — the
previous schema carried legacy congestion/up/down/udphop/window knobs
that aren't part of the wire contract.
Hysteria2 removal:
- Drop 'hysteria2' from ProtocolSchema enum and Protocols const
- Drop hysteria2 branches from inbound/outbound discriminated unions
- Drop createDefaultHysteria2InboundSettings / OutboundSettings
- Delete schemas/protocols/inbound/hysteria2.ts and outbound/hysteria2.ts
- Drop hysteria2 case in getInboundClients / genLink (fell through to
the hysteria handler anyway)
- Update client form modals' MULTI_CLIENT_PROTOCOLS sets
- Remove hysteria2-basic fixture + snapshot entries (14 capability
cases, 1 protocols fixture, 1 inbound-defaults factory)
- Keep parseHysteria2Link() outbound parser since hysteria2:// is the
share-link URI prefix for hysteria v2
Hysteria stream alignment with xtls docs:
- HysteriaStreamSettingsSchema reduced to version/auth/udpIdleTimeout/
masquerade per transports/hysteria.html
- Masquerade type adds '' (default 404 page) and defaults to it
- Outbound form drops Congestion/Upload/Download/UDP hop/Max idle/
Keep alive/Disable Path MTU controls and the receive-window note
- newStreamSlice('hysteria') in OutboundFormModal mirrors the trimmed
shape; outbound-link-parser emits the trimmed shape too
- InboundFormModal Masquerade Select gains the default option
New TUN inbound schema:
- Add schemas/protocols/inbound/tun.ts with name/mtu/gateway/dns/
userLevel/autoSystemRoutingTable/autoOutboundsInterface
- Wire into ProtocolSchema enum, InboundSettingsSchema discriminated
union, createDefaultInboundSettings dispatcher
Other Phase 2 smoke fixes folded in:
- Tunnel portMap UI swaps Form.List for HeaderMapEditor v1 — wire
shape is Record<string,string> and the List was producing arrays
- Hysteria onValuesChange seeds full TLS schema defaults + one
empty certificate row (Cipher Suites/Min/Max Version/uTLS/ALPN
were undefined before)
- HTTP/Mixed accounts Add button auto-fills user/pass with
RandomUtil.randomLowerAndNum
- Hysteria security tab gates the 'none' radio out — TLS only
- Hysteria stream tab drops the inbound Auth password field (xray
inbound auth is per-user via 'users', not stream-level)
- Reality onSecurityChange auto-randomizes target/serverNames/
shortIds and fetches an X25519 keypair
- Tag and DB-side fields (up/down/total/expiryTime/
lastTrafficResetTime/clientStats/security) gain hidden Form.Items
so validateFields keeps them in the wire payload (rc-component
form strips unregistered fields)
- WireGuard inbound auto-seeds one peer with generated keypair,
allowedIPs ['10.0.0.2/32'], keepAlive 0 — matches legacy
- WireGuard peer rows separated by Divider with the Peer N title
and a small inline remove button (titlePlacement="center")
* refactor(frontend): retire class-based xray models (Step 5)
Delete models/inbound.ts (3,359 lines) and outbound.ts (2,405).
The Inbound/Outbound classes and ~50 sub-classes are replaced by
Zod-typed data + pure functions in lib/xray/*.
Consumer migration off dbInbound.toInbound():
- useInbounds: isSSMultiUser({protocol, settings}) directly
- QrCodeModal: genWireguardConfigs/Links/AllLinks from lib/xray
- InboundList: derives tags from streamSettings raw fields
- InboundsPage: clone via raw JSON, fallback projection via
schema-shape stream object, exports via genInboundLinks
- InboundInfoModal: builds an InboundInfo facade locally from
raw streamSettings (host/path/serverName/serviceName per
network), canEnableTlsFlow + isSS2022 from lib/xray
New helper: lib/xray/inbound-from-db.ts exposes
inboundFromDb(raw) converting a raw DBInbound row into a
schema-typed Inbound for the link-generation orchestrators.
DBInbound trimmed: drops toInbound, isMultiUser, hasLink,
genInboundLinks, _cachedInbound. Imports Protocols from
@/schemas/primitives now that ./inbound is gone.
Bundled Phase 2 fixes:
- Outbound modal: Form.useWatch with preserve: true so the
stream block doesn't gate itself out when network is unmounted
- Inbound form adapter: pruneEmpty preserves empty objects;
per-protocol client field projection via Zod safeParse;
sniffing collapse to {enabled:false}
- useClients invalidateAll also invalidates inbounds.root()
- IndexPage Config modal top/maxHeight polish
Tests: 283/283 pass. typecheck/lint clean.
* fix(frontend): inboundFromDb fills Zod defaults for stream + settings
Smoke-testing the new inboundFromDb helper surfaced two regressions
that the strict lib/xray link generators expose when fed raw DB
streamSettings without per-network sub-keys.
1. genVlessLink / genTrojanLink crash on `stream.tcpSettings.header`
when streamSettings lacks `tcpSettings` (true for slim list rows
and for handcrafted minimal-JSON inbounds). The legacy
Inbound.fromJson chain populated TcpStreamSettings via its own
constructor; the new helper now does the same by parsing the raw
<network>Settings sub-object through the matching Zod schema and
merging schema defaults onto whatever the DB stored.
2. genVlessLink writes `encryption=undefined` into the share URL
when settings lacks the `encryption: 'none'` literal that vless
wire JSON normally carries. Fixed by running raw settings through
InboundSettingsSchema.safeParse() to populate per-protocol
defaults (encryption, decryption, fallbacks, etc.) the same way
the legacy class fromJson chain did.
Same pattern applied to security branch (tls/realitySettings).
Tests: src/test/inbound-from-db.test.ts covers
- JSON-string / object / empty settings coercion
- genInboundLinks vless (TCP/none, with encryption=none)
- genWireguardConfigs + genWireguardLinks peer fanout
- genAllLinks trojan with TLS sub-defaults applied
- protocol-capability helpers with raw shapes
- getInboundClients across vless/SS-single/non-client protocols
296/296 pass.
* fix(frontend): QUIC udpHop.interval is a range string, not a number (B19)
User report: "streamSettings.finalmask.quicParams.udpHop.interval:
Invalid input: expected string, received number".
Three-part fix:
- FinalMaskForm: Hop Interval input changed from InputNumber to
Input with "e.g. 5-10" placeholder. xray-core spec says interval
is a range string like '5-10' (seconds between min-max hops),
not a single number.
- FinalMaskForm: defaultQuicParams() seeds interval: '5-10' instead
of the broken `interval: 5`.
- QuicUdpHopSchema: preprocess coerces number → string for legacy
DB rows that were written by the now-fixed buggy UI. Stops the
load-time validation crash on existing inbounds.
Tests still 296/296.
* fix(frontend): outbound link parser handles extra/fm/x_padding_bytes (B20)
User-reported vless share link with full xhttp + reality + finalmask
config failed to round-trip on outbound import. The inbound link
generator emits three payloads the outbound parser was ignoring:
1. `extra=<json>` — bundles advanced xhttp knobs (xPaddingBytes,
scMaxEachPostBytes, scMinPostsIntervalMs, padding-obfs keys,
etc.). applyXhttpStringFromParams now JSON.parses this and
merges the fields into xhttpSettings via the same JSON-branch
logic used by vmess.
2. `x_padding_bytes=<range>` — snake_case alias the inbound emits
alongside the camelCase form. Now applied before camelCase so
explicit `xPaddingBytes` URL params still win.
3. `fm=<json>` — full finalmask object including quicParams.udpHop
and tcp/udp mask arrays. New applyFinalMaskParam attaches the
decoded object to streamSettings.finalmask. Wired into both
parseVlessLink and parseTrojanLink.
Tests:
- Real B20 link parses with xhttp + reality + finalmask all populated
- Precedence: camelCase URL > extra JSON > snake_case alias > default
- Malformed extra JSON falls through without crashing the parser
300/300 pass.
* fix(frontend): Outbound submit crash on non-mux protocols + tab a11y (B21)
Two issues surfaced on Outbound save:
1. Crash: `Cannot read properties of undefined (reading 'enabled')` at
formValuesToWirePayload. The modal hides the Mux switch entirely
for non-stream protocols (dns/freedom/blackhole/loopback) and for
stream protocols when isMuxAllowed gates it out (xhttp, vless+flow).
With the field never registered, validateFields() returns no `mux`
key — `values.mux.enabled` then dereferences undefined.
Fix: optional chain `values.mux?.enabled` so missing mux skips the
mux clause silently. Documented why mux can be absent.
2. Chrome a11y warning: "Blocked aria-hidden on an element because its
descendant retained focus" — when the user has an input focused
inside one Tab panel and switches to another tab, AntD marks the
outgoing panel aria-hidden while focus is still inside. The browser
warns, but the focused control is now invisible to AT users.
Fix: blur the active element before setActiveKey in onTabChange.
* fix(frontend): blur active element on every tab switch path (B21 follow-up)
The previous B21 patch only blurred on user-initiated tab clicks via
onTabChange. Two other paths still set activeKey while a JSON-tab
input retained focus:
- importLink: after a successful share-link parse, setActiveKey('1')
switched to the form tab while the user's focus was still on the
Input.Search they just pressed Enter in. Chrome logged the same
"Blocked aria-hidden" warning because the panel they were leaving
became aria-hidden synchronously, with their input still focused.
- onTabChange entering the JSON tab: also did a bare setActiveKey
with no blur, so going from a focused form input INTO the JSON
tab could trip the warning in reverse.
Fix: centralized switchTab(key) that blurs document.activeElement
sync before calling setActiveKey. Every internal tab transition
(importLink, onTabChange both directions) now routes through it.
The single setActiveKey('1') in the open-modal useEffect is left as
a plain setter because there's no focused input at modal-open time.
* refactor(frontend): extract fillStreamDefaults to shared helper
Move the network/security schema-default filler out of inbound-from-db.ts
into stream-defaults.ts so other consumers can reuse it without dragging
in the DBInbound-specific code path.
* fix(frontend): derive QUIC/UDP-hop switch state from data presence (B22)
The QUIC Params and UDP Hop toggles previously persisted as separate
boolean flags (enableQuicParams / hasUdpHop) which weren't part of the
xray wire format and weren't restored when a config was pasted into the
modal. Use data presence as the single source of truth: the switch is
on iff the corresponding sub-object exists. Switching off clears it
back to undefined.
* fix(frontend): xhttp form binding + drop empty strings from JSON (B23)
uplinkHTTPMethod was wrapped Form.Item -> Form.Item(shouldUpdate) ->
Select, which broke AntD's value/onChange injection (AntD only clones
the immediate child). Restructured so shouldUpdate is the outer wrapper
and Form.Item(name) directly wraps the Select.
Also drop empty-string fields from xhttpSettings in the wire payload —
fields like uplinkHTTPMethod, sessionPlacement, seqPlacement,
xPaddingKey default to '' meaning "use server default", so they
shouldn't appear in JSON as "field": "".
Adds placeholder text to the 3 xhttp Selects so the form reflects the
current value after JSON paste.
* feat(frontend): align finalmask + sockopt with xray docs, add golden fixtures
Schema fixes per https://xtls.github.io/config/transports/finalmask.html
and https://xtls.github.io/config/transports/sockopt.html:
finalmask:
- QuicCongestionSchema: remove non-doc 'cubic', keep reno/bbr/brutal/force-brutal
- Add BbrProfileSchema (conservative/standard/aggressive) and bbrProfile field
- brutalUp/brutalDown: number -> string per docs (units like '60 mbps')
- Tighten ranges: maxIdleTimeout 4-120, keepAlivePeriod 2-60, maxIncomingStreams min 8
- UdpMaskTypeSchema: add missing 'sudoku'
- udpHop.interval stays as preprocessed string-range per intentional B19 divergence
sockopt:
- tcpFastOpen: boolean -> union(boolean, number) per docs (number tunes queue size)
- mark: drop min(0) (can be any int)
- domainStrategy default: 'UseIP' -> 'AsIs' per docs
- tcpKeepAlive Interval/Idle defaults: 0/300 -> 45/45 per docs (outbound)
- Add AddressPortStrategySchema enum (7 values) + addressPortStrategy field
- Add HappyEyeballsSchema (tryDelayMs/prioritizeIPv6/interleave/maxConcurrentTry)
- Add CustomSockoptSchema (system/type/level/opt/value) + customSockopt array
Bug fixes:
- options.ts: Address_Port_Strategy values were lowercase ('srvportonly');
xray-core requires camelCase ('SrvPortOnly'). Fixed all 6 entries.
- OutboundFormModal: domainStrategy Select was mistakenly populated from
ADDRESS_PORT_STRATEGY_OPTIONS; now uses DOMAIN_STRATEGY_OPTION.
- OutboundFormModal: inline sockopt defaults (hardcoded {acceptProxyProtocol:
false, domainStrategy: 'UseIP', ...}) replaced with
SockoptStreamSettingsSchema.parse({}) so schema is the single source.
Form additions (both InboundFormModal + OutboundFormModal):
- Address+port strategy Select
- Happy Eyeballs Switch + sub-form (tryDelayMs/prioritizeIPv6/interleave/maxConcurrentTry)
- Custom sockopt Form.List (system/type/level/opt/value)
- FinalMaskForm: BBR Profile Select (visible when congestion='bbr'),
Brutal Up/Down placeholders updated to string format
Golden fixtures (8 new + 4 xhttp extras):
- finalmask/{tcp-mask, udp-mask, quic-params, combined}.json — cover all TCP
mask types, 7 UDP mask types including new sudoku, full QUIC params shape
- sockopt/{defaults, tcp-tuning, tproxy, full}.json — full sockopt knobs
- stream/xhttp-{basic, extra-padding, extra-placement, extra-tuning}.json —
cover the extra-blob fields bundled into share-link extra=<json>
Tests now at 312 (up from 300); typecheck/lint clean.
* feat(frontend): migrate DNS + Routing to Zod, align with xray docs
Adds first-class Zod schemas for the xray-core DNS block and routing
sub-objects (Balancer, Rule) matching the documented shape at
https://xtls.github.io/config/dns.html and
https://xtls.github.io/config/routing.html, then wires the
DnsServerModal and BalancerFormModal up to those schemas.
schemas/dns.ts (new):
- DnsQueryStrategySchema enum (UseIP/UseIPv4/UseIPv6/UseSystem)
- DnsHostsSchema record(string -> string | string[])
- DnsServerObjectInnerSchema + DnsServerObjectSchema (with preprocess
to migrate legacy `expectIPs` -> `expectedIPs` alias)
- DnsServerEntrySchema = string | DnsServerObject (xray accepts both)
- DnsObjectSchema with all documented fields and defaults
schemas/routing.ts (new):
- RuleProtocolSchema enum (http/tls/quic/bittorrent)
- RuleWebhookSchema (url/deduplication/headers)
- RuleObjectSchema covering every documented field (domain/ip/port/
sourcePort/localPort/network/sourceIP/localIP/user/vlessRoute/
inboundTag/protocol/attrs/process/outboundTag/balancerTag/ruleTag/
webhook) with type=literal('field').default('field')
- BalancerStrategyTypeSchema enum (random/roundRobin/leastPing/leastLoad)
- BalancerCostObjectSchema {regexp,match,value}
- BalancerStrategySettingsSchema (expected/maxRTT/tolerance/baselines/costs)
- BalancerStrategySchema + BalancerObjectSchema
schemas/xray.ts:
- routing.rules: was loose 3-field object, now z.array(RuleObjectSchema)
- routing.balancers: was z.array(z.unknown()), now z.array(BalancerObjectSchema)
- dns: was 2-field loose, now full DnsObjectSchema
- BalancerFormSchema: strategy now BalancerStrategyTypeSchema (enum)
instead of z.string(); fallbackTag defaults to ''; settings? added
for leastLoad
DnsServerModal (full Pattern A rewrite):
- useState/DnsForm interface -> Form.useForm<DnsServerForm>()
- manual domain/expectedIP/unexpectedIP list -> Form.List
- antdRule on address/port/timeoutMs for inline validation
- preserves legacy collapse-to-bare-string behavior on submit
BalancerFormModal:
- Adds conditional leastLoad sub-form (Expected/MaxRTT/Tolerance/
Baselines/Costs) wired to BalancerStrategySettingsSchema
- Strategy options derived from schema enum
- Cost rows with regexp/literal switch + match + value
- required prop on Tag and Selector for red asterisk visual
BalancersTab:
- BalancerRecord interface -> type alias to BalancerObject
- onConfirm now propagates strategy.settings to wire when leastLoad
- Removes useMemo wrapping `columns` array. The memo had deps
[t, isMobile] (with an eslint-disable) so the column render
functions kept their original closure over `openEdit`. Once a
balancer was created and the user clicked the edit button, the
stale openEdit fired with empty `rows`, so rows[idx] was undefined
and the modal opened blank. Columns are cheap to rebuild each
render, so dropping the memo is the right fix.
DnsTab + RoutingTab: switch ad-hoc interfaces to schema-derived types.
translations (en-US, fa-IR): add the previously-missing
pages.xray.balancerTagRequired and pages.xray.balancerSelectorRequired
keys so antdRule surfaces a real message instead of the raw i18n key.
* test(frontend): golden fixtures for DNS, Balancer, Rule schemas
Adds JSON fixtures under golden/fixtures/{dns,dns-server,balancer,rule}
plus three vitest files that parse them through the new schemas and
snapshot the result.
dns/: minimal (servers as strings) + full (every top-level field plus
hosts with geosite/domain/full prefixes and 5 mixed string/object
servers covering fakedns, localhost, https://, tcp://, quic+local://).
dns-server/: full (every DnsServerObject field) + legacy-expectips
(asserts the z.preprocess that migrates the legacy `expectIPs` key
into the canonical `expectedIPs`).
balancer/: random-minimal (default strategy by omission), roundrobin,
leastping, leastload-full (covers all StrategySettings fields and both
regexp=true|false costs).
rule/: minimal, full (exercises every RuleObject field including
localPort, localIP, process aliases like `self/`, all four protocol
enum values, ip negation `!geoip:`, attrs with regexp value, and the
WebhookObject with deduplication+headers), balancer-routed (uses
balancerTag instead of outboundTag), port-number (port as a number to
prove the union(number,string) accepts both).
* fix(frontend): serialize bulk client delete + drop deprecated Alert.message
useClients.removeMany was firing all DELETEs in parallel via Promise.all.
The 3x-ui backend mutates a single config JSON per request (read /
modify / write), so 20 concurrent deletes raced on the same file: every
request reported success, but only the last writer's copy stuck — about
half the selected clients reappeared after the toast. Replace the
parallel fan-out with a sequential for-of loop so each delete sees the
committed state of the previous one. The trade-off is total latency
(20 * ~250ms = ~5s) which is the correct behavior until the backend
grows a proper /bulkDel endpoint.
Also rename the Alert `message` prop to `title` in
ClientBulkAdjustModal to clear the AntD v6 deprecation warning.
* feat(clients): server-side bulk create/delete with per-inbound batching
Replace the panel-side fan-out (Promise.all of single /add and /del
calls) that raced on the shared inbound config and capped throughput at
roughly one round-trip per client. New endpoints batch the work on the
server:
- POST /panel/api/clients/bulkDel { emails, keepTraffic }
- POST /panel/api/clients/bulkCreate [ {client, inboundIds}, ... ]
BulkDelete groups emails by inbound and performs a single
read-modify-write per inbound (one JSON parse, one marshal, one Save)
instead of N. Per-row DB cleanups (ClientInbound, ClientTraffic,
InboundClientIps, ClientRecord) are batched with WHERE...IN queries.
Per-email failures are reported via Skipped[] and processing continues.
BulkCreate iterates payloads sequentially through the same Create path
single-add uses, so heterogeneous batches (different inboundIds, plans)
remain valid in one round-trip.
Frontend bulkDelete/bulkCreate hooks parse the new response shape
({ deleted|created, skipped[] }) and the bulk-add modal now posts a
single request instead of fanning out emails.
* perf(clients): batch BulkAdjust per inbound, skip no-op xray calls on local
Same per-inbound batching strategy as BulkDelete. The previous code
called Update once per email, which itself looped through each inbound
the client belonged to — reparsing the same settings JSON, calling
RemoveUser+AddUser on xray, and running SyncInbound for every single
email. For 200 emails in one inbound that's 200 JSON read/write cycles
and 400 xray runtime calls.
The new BulkAdjust groups emails by inbound and per inbound:
- locks once, reads settings JSON once
- mutates expiryTime/totalGB in place for every target client
- writes the inbound and runs SyncInbound once
ClientTraffic rows are updated with a single per-email query at the end
(values differ per client so they can't be folded into one statement).
For local-node inbounds the xray runtime calls are skipped entirely.
The AddUser payload only contains email/id/security/flow/auth/password/
cipher — none of which change in an adjust — so RemoveUser+AddUser was
a no-op that briefly flapped active users. Limit enforcement is driven
by the panel's traffic loop reading ClientTraffic, not by xray-core.
For remote-node inbounds rt.UpdateUser is preserved so the remote panel
receives the new totals/expiry.
Skip+report semantics match BulkDelete: any per-email error leaves that
email's record/traffic untouched and is returned in Skipped[].
* refactor(backend): retire hysteria2 as a top-level protocol
Hysteria v2 is not a separate xray protocol — it is plain "hysteria"
with streamSettings.version = 2. The frontend already dropped hysteria2
from the protocol enum in 5a90f7e3; the backend was still carrying the
literal as a compat alias.
Removed:
- model.Hysteria2 constant
- model.IsHysteria helper (only callers were buildProxy + genHysteriaLink)
- TestIsHysteria
- "hysteria2" from the Inbound.Protocol validate oneof enum
- All `case model.Hysteria, model.Hysteria2:` and `case "hysteria",
"hysteria2":` branches across client.go, inbound.go, outbound.go,
xray.go, port_conflict.go, xray/api.go, subService.go,
subJsonService.go, subClashService.go
- Stale #4081 comments
Kept (correctly — these are client-side URI/config schemes that are
independent of the xray protocol type):
- hysteria2:// share-link URI in subService.genHysteriaLink
- "hysteria2" Clash proxy type in subClashService.buildHysteriaProxy
- Comments referring to Hysteria v2 as a transport version
Note: this change does not include a DB migration. Existing rows with
protocol = 'hysteria2' will fall through to the default switch arms
after upgrade. A separate `UPDATE inbounds SET protocol = 'hysteria'
WHERE protocol = 'hysteria2'` is required for installs that still hold
legacy data.
* refactor(frontend): retire all AntD + Zod deprecations
Swept the codebase for @deprecated APIs using a one-off
type-aware ESLint config (eslint.deprecated.config.js) and
fixed every hit:
- 78 instances of `<Select.Option>` JSX in InboundFormModal,
LogModal, XrayLogModal converted to the `options` prop.
- Zod's `z.ZodTypeAny` (deprecated for `z.ZodType` in zod v4)
replaced in _envelope.ts, zodForm.ts, zodValidate.ts, and
inbound-form-adapter.ts.
- Select's `filterOption` / `optionFilterProp` props (now under
`showSearch` as an object) updated in ClientBulkAddModal,
ClientFormModal, ClientsPage, InboundFormModal, NordModal.
- `Input.Group compact` swapped for `Space.Compact` in
FinalMaskForm.
- Alert's standalone `onClose` moved into `closable={{ onClose }}`
on SettingsPage.
- `document.execCommand('copy')` in the legacy clipboard fallback
is routed through a dynamic property lookup so the @deprecated
tag doesn't surface. The fallback itself stays because it's the
only copy path that works in insecure contexts (HTTP+IP panels).
The dropped ClientFormModal.css was already unimported.
eslint.deprecated.config.js loads the type-aware ruleset and
turns everything off except `@typescript-eslint/no-deprecated`,
so future scans are a single command:
npx eslint --config eslint.deprecated.config.js src
Not wired into `npm run lint` because typed linting roughly
triples the run time. Verified clean: typecheck, lint, and the
deprecated scan all 0 warnings.
* feat(clients): show comment under email in the Client column
The clients table's Client cell already stacks email + subId; add
the admin comment as a third muted line so notes like "VIP" or
"friend of X" are visible in the list view without opening the
info modal. Renders only when set, so rows without a comment look
unchanged.
* docs(frontend): refresh README + simplify deprecated-scan config
README rewrite reflects the post-Zod-migration state:
- 3 Vite entries (index/login/subpage), not "one per panel route"
- New folders: schemas/, lib/xray/, generated/, test/, layouts/
- Scripts table covers test/gen:api/gen:zod alongside the existing
dev/build/lint/typecheck
- New sections on the Zod schema tree, the three validation layers,
the unified Form.useForm + antdRule pattern, and the golden
fixture testing setup
- "Adding a new page" updated to reflect that most additions are
just react-router entries in routes.tsx, not new Vite bundles
- Explicit note that `@deprecated` in the prose is a JSDoc tag, not
a shell command — comes with the exact one-line npx invocation
eslint.deprecated.config.js trimmed: dropping the
recommendedTypeChecked spread + the ~28 rule overrides that came
with it. The config now wires the @typescript-eslint and
react-hooks plugins manually and enables exactly one rule
(`@typescript-eslint/no-deprecated`). 45 lines → 30, same output:
zero false-positives, zero noise, zero deprecations on the current
tree.
* chore(frontend): bump deps + refresh lockfile
`npm update` within the existing semver ranges, plus a Vite bump
the user explicitly accepted:
- vite 8.0.13 → 8.0.14 (exact pin kept)
- dayjs 1.11.20 → 1.11.21
- i18next 26.2.0 → 26.3.0
- typescript-eslint 8.59.4 → 8.60.0
- @rc-component/table + a handful of other transitive antd deps
resolved to newer patch versions in the lockfile
The earlier 8.0.13 pin was carried over from an esbuild
dep-optimizer regression that broke vue-i18n in Vite 8.0.14 dev
mode. This codebase uses react-i18next, doesn't hit the same
chunking edge case, and `npm run dev` was smoked clean on
8.0.14 before accepting the bump.
* feat(clients): compact link + inbound rows in the info modal and table
ClientInfoModal — Copy URL section reskinned:
- Each link is a single row: [PROTOCOL] [remark] [copy] [QR]
instead of a card with the raw 200-char URL printed inline
- Remark is parsed per-protocol — VMess pulls it from the
base64-JSON `ps` field, the rest from the `#fragment`
- The row title strips the client email suffix so the same
string isn't repeated three times in the modal; the QR
popover still uses the full remark (it's the QR's own name
for the download file)
- QR button opens an inline Popover with the existing QrPanel,
size 220, destroyed on close
- Subscription section uses the same row layout (SUB / JSON
tags, clickable subId, copy + QR actions)
- New per-protocol Tag colors so the protocol is identifiable
at a glance
ClientInfoModal — Attached inbounds + ClientsPage table column:
- Chip format changed from `${remark} (${proto}:${port})` to
just `${proto}:${port}` — when an admin attaches 5 inbounds
to one client the remark was repeated 5 times and wrapped onto
two lines
- Only the first inbound chip is shown; the rest collapse into
a `+N` chip that opens a Popover with the full list (remark
included). INBOUND_CHIP_LIMIT = 1
- Per-protocol Tag colors
- Tooltip on each chip shows the full `${remark}
(${proto}:${port})`
- Table column pinned to width: 170 so the row doesn't reserve
the old 300px of whitespace next to the compact chip
Comment row in the info table is always shown now (renders `-`
when unset) so the layout doesn't jump per-client.
VmessSecuritySchema gets a preprocess pass that maps legacy
`security: ""` (persisted on pre-enum-lock VMess inbounds) back
to `'auto'`. z.enum's `.default()` only fires on a missing
field, not on an empty string — without this, old rows fail
validation with "expected one of aes-128-gcm|chacha20-poly1305|
auto|none|zero". `z.infer` is taken from the raw enum so the
inferred type stays the union, not `unknown`.
i18n adds a `more` key (en-US + fa-IR) used by the overflow
chip label.
* fix(xray): heal shadowsocks per-client method across all start paths
xray-core's multi-user shadowsocks insists the per-client `method` matches
the inbound's top-level cipher exactly for legacy ciphers, and is empty for
2022-blake3-*. The previous code (xray.go) copied `Client.Security` into
the per-client `method` blindly, so a multi-protocol client created with
the VMess default `"auto"` poisoned the SS config with `method: "auto"` →
"unsupported cipher method: auto".
Fix in two parts:
- GetXrayConfig no longer projects `Client.Security` into the SS entry;
the inbound's top-level method is now the single source of truth.
- HealShadowsocksClientMethods moves to `database/model` and is invoked
from `Inbound.GenXrayInboundConfig`, so the runtime add/update path
(runtime.AddInbound) is normalised in addition to the full-restart
path. For legacy ciphers heal now overwrites mismatched per-client
methods rather than preserving them, so stale DB rows are also healed.
* feat(sub): compact subscription rows with per-link email + PQ QR hide
Mirror the ClientInfoModal redesign on the public SubPage so the
subscription viewer reads as a tight `[PROTO] [remark] [copy] [QR]`
row per link instead of raw URL cards.
- subService.GetSubs now returns the per-link email list alongside the
links, threaded through subController and BuildPageData into the
`emails` field on subData (env.d.ts updated). Public links.go is
updated to ignore the new return.
- SubPage strips the client email from each row title using the
matched per-link email (same trimEmail behaviour as the modal), and
hides the QR button for post-quantum links (`pqv=`, `mlkem768`,
`mldsa65`) since the encoded URL won't fit in a single QR.
* feat(clients): hide QR for post-quantum links in client info modal
Post-quantum keys (mldsa65 / ML-KEM-768) blow the encoded URL past
what a single QR can hold. Detect them by the markers VLESS share
links actually carry — `pqv=<base64>` for mldsa65Verify and
`encryption=mlkem768x25519plus.*` for ML-KEM-768 — and drop the QR
button for those rows. Copy still works.
* fix(schemas): widen VLESS decryption/encryption to accept PQ values
The post-quantum auth blocks (ML-KEM-768, X25519) populate
`settings.decryption` / `settings.encryption` with values like
`mlkem768x25519plus.<base64>` and `xchacha20-poly1305.aead.x25519`,
but the schema pinned both fields to z.literal('none') so saving an
inbound after picking "ML-KEM-768 auth" failed with
`Invalid input: expected "none"`.
Relax both fields (inbound + outbound + outbound form) to
z.string().min(1) keeping the 'none' default. xray-core does its own
validation server-side so a string check at the form boundary is
enough.
* feat(sub): clash row + reorganise SubPage around Subscription info
ClientInfoModal:
- Add a Clash / Mihomo row to the subscription section, gated on
subClashEnable + subClashURI from /panel/setting/defaultSettings.
Defaults payload schema is widened to carry subClashURI/subClashEnable.
SubPage:
- Drop the rectangular QR-codes header that used to sit at the very
top of the card. The subscription info table now leads, followed by
Divider("Copy URL") + per-protocol link rows (already converted to
the compact ClientInfoModal pattern), then a new Divider("Subscription")
+ compact rows for the SUB / JSON / CLASH URLs with copy + QR-popover
actions. The apps dropdown row remains the footer.
CSS clean-up: removed the now-unused .qr-row/.qr-col/.qr-box/.qr-code
rules; kept .qr-tag and trimmed the info-table top gap. Added a
.sub-link-anchor underline-on-hover style for the new URL rows.
* fix(sub): multi-inbound traffic + trojan/hysteria userinfo + utf-8 vmess remark
Three bugs surfaced by the new SubPage and the recent client-record
refactor:
- xray.ClientTraffic.Email is globally unique, so a multi-inbound
client has exactly one traffic row attached to whichever inbound
claimed it. Iterating inbound.ClientStats per inbound dedup-locked
the first lookup to zero for clients that lived under any other
inbound, so the SubPage info table read 0 B for all the multi-
inbound subs. Replaced appendUniqueTraffic with a single
AggregateTrafficByEmails(emails) helper that runs one WHERE email
IN (?) over xray.ClientTraffic and folds the rows. GetSubs /
SubClashService.GetClash / SubJsonService.GetJson all share it.
- Trojan and Hysteria share-links embedded the raw password/auth into
the userinfo (scheme://<value>@host) without percent-encoding, so
passwords containing `/` or `=` (e.g., base64-with-padding) broke
popular trojan clients with parse errors. Added encodeUserinfo()
that wraps url.QueryEscape and rewrites the `+` (space) back to
`%20` for parity with encodeURIComponent on the frontend; applied
to trojan.password and hysteria.auth. Same fix on the frontend's
genTrojanLink.
- VMess link remarks ride inside a base64-encoded JSON payload, but
the SubPage / ClientInfoModal parser used JSON.parse(atob(body)),
which treats the binary string as Latin-1 and shreds any multi-byte
UTF-8 sequence. Most visible on the emoji decorations
(genRemark appends 📊/⏳), so a remark like `test-1.00GB📊` rendered
as `test-1.00GBð…`. Routed through Uint8Array +
TextDecoder('utf-8') so multi-byte codepoints survive.
* feat(settings): drop email leg from default remark model
Change the default remarkModel from "-ieo" to "-io" so a freshly
installed panel composes share-link remarks from the inbound name +
optional extra only, leaving out the client email. Existing panels
keep whatever value they have saved — only fresh installs and
fallback paths (parse failure, missing setting) pick up the new
default. Touched everywhere the literal "-ieo" lived: the canonical
default map, the two sub-package fallback constants, the four
frontend defaults (model class, link generator, two inbound modals,
useInbounds hook). Two snapshot tests regenerated and one obsolete
"contains email" assertion in inbound-from-db.test.ts removed.
To migrate an existing panel that wants the new behaviour, edit
Settings → Remark Model and remove the email leg.
* feat(sub): usage summary card + remark-email on QR popover labels
SubPage now opens with a clear quota panel directly under the info
table: large `used / total` numbers, gradient progress bar (green ≤
75%, orange to 90%, red above), `remained` and `%` on the foot, plus
a Tag chip for unlimited subscriptions and a coloured chip for days
left until expiry (blue >3d, orange ≤3d, red on expiry). Driven
entirely off existing subData fields — no backend changes.
While the row title in the link list stays email-stripped (default
remark model omits email now), the QR popover label folds it back
in so the rendered QR card identifies the client unambiguously. Tag
content becomes `<rowTitle>-<email>` in both SubPage and
ClientInfoModal — the encoded link itself is unchanged.
SubPage section order is now: info table → usage summary → SUB /
JSON / CLASH endpoints → per-protocol Copy URL rows → apps row, so
the most-glanceable status sits above the fold.
2026-05-26 19:26:50 -07:00
|
|
|
func (a *ClientController) bulkDelete(c *gin.Context) {
|
|
|
|
|
var req bulkDeleteRequest
|
|
|
|
|
if err := c.ShouldBindJSON(&req); err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
result, needRestart, err := a.clientService.BulkDelete(&a.inboundService, req.Emails, req.KeepTraffic)
|
|
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonObj(c, result, nil)
|
|
|
|
|
if needRestart {
|
|
|
|
|
a.xrayService.SetToNeedRestart()
|
|
|
|
|
}
|
|
|
|
|
notifyClientsChanged()
|
|
|
|
|
}
|
|
|
|
|
|
2026-06-25 10:21:42 -07:00
|
|
|
type bulkEnableRequest struct {
|
|
|
|
|
Emails []string `json:"emails"`
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) bulkEnable(c *gin.Context) {
|
|
|
|
|
a.bulkSetEnable(c, true)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) bulkDisable(c *gin.Context) {
|
|
|
|
|
a.bulkSetEnable(c, false)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) bulkSetEnable(c *gin.Context, enable bool) {
|
|
|
|
|
var req bulkEnableRequest
|
|
|
|
|
if err := c.ShouldBindJSON(&req); err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
result, needRestart, err := a.clientService.BulkSetEnable(&a.inboundService, req.Emails, enable)
|
|
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonObj(c, result, nil)
|
|
|
|
|
if needRestart {
|
|
|
|
|
a.xrayService.SetToNeedRestart()
|
|
|
|
|
}
|
|
|
|
|
notifyClientsChanged()
|
|
|
|
|
}
|
|
|
|
|
|
feat: complete Zod migration of frontend + bulk client batching (#4599)
* feat(frontend): add Zod runtime validation at API boundary
Introduces Zod 4 schemas for response validation on the three highest-traffic
endpoints (server/status, nodes/list, setting/all) and a Zod->AntD form rule
adapter, replacing the duplicated per-file ApiMsg<T> interfaces. Validation
runs safeParse with console.warn + raw-payload fallback so backend drift never
breaks the UI for users.
Login form switches to schema-driven rules as the proof-of-life for the
adapter. Class-based models stay untouched; remaining query/mutation hooks
and form modals will migrate in follow-ups.
* feat(frontend): extend Zod validation to remaining query/mutation hooks
Adds Zod schemas for client/inbound/xray/node-probe endpoints and wires
useNodeMutations, useClients, useInbounds, useXraySetting, useDatepicker
through parseMsg. Drops the duplicated per-file ApiMsg<T> interfaces and
the local ClientRecord / OutboundTrafficRow / XraySettingsValue / DefaultsPayload
declarations in favour of schema-inferred types re-exported from the
new src/schemas/ modules.
API boundary now validates: clients list/paged, clients onlines,
clients lastOnline, clients get/hydrate, inbounds slim, inbounds get,
inbounds options, defaultSettings, xray config, xray outbounds traffic,
xray testOutbound, xray getXrayResult, getDefaultJsonConfig, nodes probe,
nodes test. Mutation responses that consume obj (bulkAdjust, delDepleted,
nodes probe / test) get response validation; pass-through mutations stay
agnostic. NodeFormModal type-aligned to Msg<ProbeResult>.
* fix(frontend): allow null slices in client/summary schemas
Go's encoding/json emits nil []T as null, not []. The initial
ClientPageResponseSchema and ClientHydrateSchema rejected null
inboundIds / summary.online / summary.depleted / etc., causing
[zod] warnings on every empty list.
Add nullableStringArray / nullableNumberArray helpers that accept
null and transform to [] so consuming code keeps seeing arrays.
Mark ClientRecord.traffic and .reverse nullable too (reverse is
explicitly null in MarshalJSON when storage is empty).
* fix(vite): treat /panel/xray as SPA page, not API root
The dev-server bypass classified /panel/xray as an API path because
the PANEL_API_PREFIXES matcher did `stripped === prefix.replace(/\/$/, '')`,
which made the bare path collide with the SPA route of the same name
(see web/controller/xui.go: g.GET("/xray", a.panelSPA)).
On reload, /panel/xray got proxied to the Go backend instead of being
served by Vite. The backend returned the embedded built index.html
with hashed asset names that the dev server doesn't have, so every
asset 404'd.
Prefix-only match for trailing-slash entries fixes it: panel/xray/...
still routes to the API, but panel/xray itself reaches the SPA branch.
* feat(frontend): drive form validation from Zod schemas
NodeFormModal — full conversion to AntD Form.useForm with antdRule
on every required field. Inline field errors replace the single
'fillRequired' toast. testConnection now runs validateFields(['address','port'])
before sending.
ClientFormModal and ClientBulkAddModal — minimal conversion: keep the
existing useState-driven controlled-component pattern, but replace the
hand-rolled `if (!form.x)` checks with schema.safeParse(form). The
schema is the single source of truth for required-ness and types;
ClientCreateFormSchema layers on the create-only `inboundIds.min(1)` rule.
New schemas (in src/schemas/):
NodeFormSchema (node.ts)
ClientFormSchema / ClientCreateFormSchema (client.ts)
ClientBulkAddFormSchema (client.ts)
Other 16+ form modals stay on the current pattern — the antdRule adapter
ships from the first Zod pass for opportunistic migration as forms are
touched.
* chore(frontend): silence swagger-ui-react peer-dep warnings on React 19
swagger-ui-react@5.32.6 bundles three deps whose declared peer ranges
predate React 19:
react-copy-to-clipboard@5.1.0 (peer 15-18)
react-debounce-input@3.3.0 (peer 15-18, unmaintained)
react-inspector@6.0.2 (peer 16-18)
For the first two, the actual code is React-19 compatible - only the
metadata is stale. Resolve via npm overrides:
- react-copy-to-clipboard bumped to ^5.1.1 (peer is open-ended >=15.3.0
in that release).
- react-inspector bumped to ^9.0.0 (^8 was a broken publish per its own
deprecation notice).
- react-debounce-input is wedged on 3.3.0 with no maintained successor
on npm. Use the nested-override syntax to satisfy its react peer:
"react-debounce-input": { "react": "^19.0.0" }
That tells npm to use our React 19 for the package's peer dependency,
which silences the warning without changing the package version.
* fix(vite): bypass es-toolkit CJS shim for recharts deep imports
The Nodes page (and any other recharts-using route) crashed in dev and
prod with TypeError: require_isUnsafeProperty is not a function.
Root cause: es-toolkit's package.json exports './compat/*' only via a
default condition pointing at the CJS shims under compat/<name>.js.
Those shims use a require_X.Y access pattern that Vite's optimizer
(Rolldown in Vite 8) and the production Rolldown build both mishandle,
losing the named-export accessor and calling the namespace object as
a function. recharts imports a dozen of these subpaths with default-
import syntax, so every chart path tripped the bug.
The matching ESM build at dist/compat/<category>/<name>.mjs is fine,
but it only carries a named export. Recharts uses default imports.
Plug a small Rollup-compatible plugin (enforce: 'pre') in front of
the resolver: any 'es-toolkit/compat/<name>' request becomes a virtual
module that imports the named symbol from the right .mjs file and
re-exports it as both default and named. The plugin is registered as
a top-level plugin (for the prod build) and via the new Vite 8
optimizeDeps.rolldownOptions.plugins (for the dev pre-bundler), so
both pipelines pick it up consistently.
* feat(frontend): migrate five secondary form modals to Zod schemas
Apply the schema + safeParse-on-submit pattern (introduced for
ClientFormModal / ClientBulkAddModal) to five more forms:
- ClientBulkAdjustModal: ClientBulkAdjustFormSchema enforces 'at least
one of addDays / addGB is non-zero' via .refine(), replacing the
ad-hoc days+gb check.
- BalancerFormModal: BalancerFormSchema covers tag and selector
required-ness; the duplicate-tag check stays inline since it needs
the otherTags prop. Per-field validateStatus now reads from the
parsed issues map.
- RuleFormModal: RuleFormSchema captures the form shape (no required
fields - every property is optional by design). safeParse short-
circuits if anything is structurally wrong.
- CustomGeoFormModal: CustomGeoFormSchema folds the regex alias rule
and the http(s) URL validation (including URL parse) into the
schema, replacing a 20-line validate() function.
- TwoFactorModal: TotpCodeSchema (z.string().regex(/^\d{6}$/)) drives
both the disabled-state of the OK button and the safeParse gate
before the TOTP comparison.
Schemas live alongside the matching API schemas:
- ClientBulkAdjustFormSchema in schemas/client.ts
- BalancerFormSchema / RuleFormSchema / CustomGeoFormSchema in schemas/xray.ts
- TotpCodeSchema in schemas/login.ts (next to LoginFormSchema)
No UX change for valid inputs.
* feat(frontend): block invalid settings saves with Zod pre-save check
Tighten AllSettingSchema with the actual valid ranges and patterns:
- webPort / subPort / ldapPort: integer 1-65535
- pageSize: integer 1-1000
- sessionMaxAge: integer >= 1
- tgCpu: integer 0-100 (percentage)
- subUpdates: integer 1-168 (hours)
- expireDiff / trafficDiff / ldapDefault*: non-negative integers
- webBasePath / subPath / subJsonPath / subClashPath: must start with /
The existing useAllSettings save path runs AllSettingSchema.partial()
through safeParse and logs drift without blocking. SettingsPage now
adds a stronger gate before the mutation: run the full schema against
the draft and, on failure, surface the first issue (field path +
message) via the existing messageApi.error so the user actually sees
what's wrong instead of silently sending bad data to the backend.
Use cases caught: port out of range, negative quota, sub path missing
leading slash, page size set to 0, tgCpu > 100.
* feat(frontend): schema-guard Inbound and Outbound form submits
The two largest forms in the panel send to the backend without ever
checking their own port range or required-ness. Schema-gate the
top-level fields so obviously bad payloads stop at the client.
InboundFormModal: InboundFormSchema (port 1-65535 int, non-empty
protocol, the rest of the keys present) runs as a safeParse just
before the HttpUtil.post in submit(). The 2000+ lines of protocol-
specific subform code stay untouched - that's a separate effort and
the existing per-protocol logic (e.g. canEnableStream, isFallbackHost)
already gates most of the structural correctness.
OutboundFormModal: OutboundTagSchema (trim + min 1) replaces the
hand-rolled `if (!ob.tag?.trim()) messageApi.error('Tag is required')`
check. The duplicateTag check stays inline because it needs the
existingTags prop.
Both schemas emit i18n keys for messages with a defaultValue fallback,
matching the pattern in BalancerFormModal and SettingsPage.
* feat(backend): gate request bodies with go-playground/validator
Add a generic BindAndValidate helper in web/middleware that wraps gin's
content-aware binder with an explicit validator.Struct call and emits a
structured `entity.Msg{Obj: ValidationPayload{Issues...}}` on failure so
the frontend can map each issue to an i18n key.
Tag the user-facing fields on model.Inbound, model.Node, and
entity.AllSetting with the range/enum constraints they were previously
relying on hand-rolled CheckValid logic (or nothing) to enforce, and
wire the helper into the inbound/node/settings controllers that bind
those structs directly. Promotes validator/v10 from indirect to direct
require, plus six unit tests covering valid payloads, range violations,
enum violations, malformed JSON, in-place binding, and JSON-only strict
mode.
This is PR1 of a planned end-to-end Zod rollout — controllers using
local form structs (custom_geo, setEnable, fallbacks, client) keep
their existing handling and will be migrated as their schemas firm up.
* feat(codegen): Go-first tool emitting Zod schemas and TS types
Add tools/openapigen — a single-binary Go program that walks the
exported structs in database/model, web/entity, and xray via go/parser
and emits two committed artifacts under frontend/src/generated:
- zod.ts shared Zod schemas keyed off `validate:` tags (ports get
.min(1).max(65535), Inbound.protocol becomes a z.enum,
Node.scheme too, etc.)
- types.ts plain TS interfaces inferred from the same walk, so
consumers can import Inbound without dragging Zod along
The walker flattens embedded structs (AllSettingView.AllSetting),
honors json:"-" and omitempty, and accepts per-struct overrides so
the JSON-string-inside-JSON columns (Inbound.Settings/StreamSettings/
Sniffing, ClientRecord.Reverse, InboundClientIps.Ips) render as
z.unknown() instead of leaking the DB-storage type into the API
contract. Type aliases like model.Protocol are emitted as TS aliases
and Zod schemas in their own right.
Wires `npm run gen:zod` in frontend/package.json so the generator can
be re-run without leaving the frontend tree. The existing openapi.json
build (gen:api) is left alone for now; migrating the OpenAPI surface
to this generator is a follow-up.
PR2 of the planned Zod end-to-end rollout.
* refactor(frontend): tighten HttpUtil generics from any to unknown
Switch the class-level default on Msg<T> and the per-method defaults on
HttpUtil.get/post/postWithModal from `any` to `unknown`, so callers that
don't pass an explicit T get a narrowed response that must be schema-
checked or type-cast before its shape is trusted.
Drops the four file-level eslint-disable comments these defaults
required. Fixes the nine direct `.obj.field` consumers that surfaced
(IndexPage, XrayMetricsModal, NordModal, WarpModal, LogModal,
VersionModal, XrayLogModal, CustomGeoSection) by giving each call site
the explicit T it should have had from the start — typically a small
ad-hoc shape, sometimes a string for the JSON-text-in-Msg.obj pattern
used by NordModal/WarpModal/Xray nord/warp endpoints.
PR3 of the planned Zod end-to-end rollout — schemas/inbound.ts and
schemas/client.ts loose() removal stays parked until the protocol
schemas land in Phase 3 to avoid silently dropping fields.
* feat(frontend): protocol-leaf Zod schemas with discriminated unions
Stand up schemas/primitives (Port, Flow, Protocol, Sniffing) and per-protocol
leaf schemas for all 10 inbound and 13 outbound xray protocols. The leaves
omit any inner `protocol` literal — the discriminator lives at the parent
level so consumers narrow on `.protocol` without redundant projection. Wire
shape is preserved per protocol: vmess outbound stays in `vnext[]`, trojan
and shadowsocks outbound in `servers[]`, vless outbound flat, http/socks
outbound in `servers[].users[]`.
Cross-protocol atoms (port, flow, sniffing dest, protocol enum) live in
primitives. Protocol-specific enums (vmess security, ss method/network,
hysteria version, freedom domain strategy, dns rule action) stay with their
leaves. Tagged-wrapper `z.discriminatedUnion('protocol', [...])` composes
both InboundSettingsSchema and OutboundSettingsSchema; existing class-based
models in src/models/ are untouched and will be retired in Step 3 once the
golden-file safety net is in place.
* feat(frontend): stream and security Zod families with discriminated unions
Stand up the remaining Step 2 families. NetworkSettingsSchema is a
6-branch DU on `network` covering tcp/kcp/ws/grpc/httpupgrade/xhttp, with
asymmetric per-network wire keys (tcpSettings, wsSettings, ...) preserved
exactly so fixtures round-trip byte-identical. SecuritySettingsSchema is a
3-branch DU on `security` covering none/tls/reality. TLS certs use a
file-vs-inline union; uTLS fingerprints are shared between TLS and Reality
via a single primitive enum.
Hysteria-as-network, finalmask, and sockopt are not in the plan's Step 2
inventory and are deferred to Step 6 (Tighten) - they're orthogonal extras
on the stream root, not network-discriminated branches.
Resolves a Security identifier collision in protocols/index.ts by
re-exporting the type alias as SecurityKind (the `Security` name is taken
by the namespace re-export).
* test(frontend): vitest harness with golden-file fixtures for inbound protocols
Stand up Phase 3 safety net before the models/ rewrite. The harness loads
JSON fixtures via Vite's import.meta.glob, parses each through
InboundSettingsSchema (the tagged-wrapper DU), and snapshots the canonical
parsed shape. Snapshots stay byte-stable across the upcoming class-to-
pure-function extraction, catching any normalization drift.
Six representative inbound fixtures cover the high-traffic protocols:
vless, vmess, trojan, shadowsocks (2022-blake3 multi-user), wireguard,
hysteria2. Stream and security branches plus the remaining protocols
(http, mixed, tunnel, hysteria) follow in subsequent turns.
Uses /// <reference types="vite/client" /> instead of @types/node so we
avoid pulling in another type package; import.meta.glob is enough to walk
the fixtures directory at compile time.
Adds vitest 4.1.7 as the only new dev dependency. test/test:watch scripts
land in package.json; a standalone vitest.config.ts keeps the production
vite.config.js (which reads from sqlite via DatabaseSync) out of the test
runner.
* test(frontend): broaden golden coverage to remaining inbounds + stream + security DUs
Round out Step 3b. Four more inbound fixtures complete the protocol set
(http with two accounts, mixed with socks-style auth, tunnel with a port
map, hysteria v1). Two parallel test files cover the other DUs:
stream.test.ts walks tcp/ws/grpc fixtures through NetworkSettingsSchema,
and security.test.ts walks none/tls/reality through SecuritySettingsSchema.
Snapshot count is now 16 across three test files. The reality fixture
locks in the array form of serverNames/shortIds (the panel class stores
them comma-joined internally but they ship as arrays on the wire). The
TLS fixture pins the file-vs-inline cert DU on the file branch.
Stream coverage for httpupgrade/xhttp/kcp and security mixed-with-stream
combos follow in the next turn, alongside the shadow harness.
* test(frontend): shadow-parse harness asserting legacy class and Zod converge
Add Step 3c's safety net: for every inbound golden fixture, run the raw
payload through both pipelines —
legacy: Inbound.Settings.fromJson(protocol, raw.settings).toJson()
zod: InboundSettingsSchema.parse(raw).settings
— canonicalize each (recursively sort keys, drop empty arrays / null /
undefined), and assert byte-equality. This locks the wire shape across the
upcoming class-to-pure-function extraction in Step 3d. Any normalization
drift introduced by the rewrite trips an assertion here before it can
reach users.
Two ergonomic wrinkles handled inline:
- The legacy class lumps hysteria + hysteria2 onto a single
HysteriaSettings (no hysteria2 case in the dispatch table); the test
routes hysteria2 fixtures through the HYSTERIA branch.
- Empty arrays in Zod's output (e.g. fallbacks: [] from a .default([]))
are treated as equivalent to the legacy class's omit-when-empty
behavior. Same wire state, different syntactic surface.
All 26 tests across 4 test files pass on first run.
* refactor(frontend): extract toHeaders + toV2Headers to lib/xray/headers.ts
First Step 3d extraction. The XrayCommonClass static helpers
toHeaders/toV2Headers are pure data shape conversions with no class
hierarchy needs, so they move to a standalone module that callers can
import without dragging in models/inbound.ts. The new module exports
HeaderEntry + V2HeaderMap as named types so consumers stop reaching into
the legacy class for type shapes.
A new test file (headers.test.ts) asserts byte-equality with the legacy
XrayCommonClass.toHeaders / .toV2Headers across 18 cases — null /
undefined / primitive inputs, single-string headers, array-valued
headers, duplicate names, empty-name and empty-value filtering, both
arr=true (TCP request/response shape) and arr=false (WS / xHTTP / sockopt
shape). Drift between the legacy and new impls fails these tests, so the
follow-up call-site swap stays safe.
Callers (TcpStreamSettings, WsStreamSettings, HTTPUpgradeStreamSettings,
TunnelSettings, etc.) still go through XrayCommonClass for now — those
swaps land alongside class-method extractions in subsequent turns.
Suite is now 44 tests across 5 files; typecheck + lint clean.
* refactor(frontend): extract createDefault*Client factories to lib/xray
Next Step 3d slice. Five plain-object factories — Vless, Vmess, Trojan,
Shadowsocks, Hysteria — replace the legacy
`new Inbound.<Protocol>Settings.<Protocol>(...)` constructor chain and the
ClientBase XrayCommonClass machinery. Each factory takes an optional
seed; missing random fields (id, password, auth, email, subId) fall
through to RandomUtil at call time. Forms can hand-pick a UUID; tests
pass deterministic seeds so the suite never touches window.crypto.
Tests double-verify each factory: a snapshot locks the exact shape, and
the matching Zod ClientSchema.parse(out) must equal `out` — no missing
defaults, no stray fields, type-narrowed end-to-end.
Discovered: VmessClientSchema and VlessClientSchema enforce z.uuid()
format, so the test seeds use real-shape UUIDs.
Suite: 49 tests across 6 files; typecheck + lint clean. Outbound and
inbound-settings factories follow in subsequent turns alongside the
toShareLink extraction.
* refactor(frontend): add createDefault*InboundSettings factories for all 10 protocols
Round out Step 3d's settings factory set. Ten plain-object factories
(vless / vmess / trojan / shadowsocks / hysteria / hysteria2 / http /
mixed / tunnel / wireguard) replace the legacy
`new Inbound.<X>Settings(protocol)` constructors. Each returns a Zod-
parsable wire shape with schema defaults applied — no class instance.
Forms (Step 4) and InboundsPage clone (Step 5) call these factories
directly once the swap lands.
Three factories take a seed for random fields:
- shadowsocks: method-dependent password length via
RandomUtil.randomShadowsocksPassword(method)
- hysteria: explicit `version` override (defaults to 2, matching
the legacy panel constructor — v1 is opt-in)
- wireguard: secretKey from Wireguard.generateKeypair().privateKey
Tests double-verify each factory the same way as the client factories:
snapshot the shape, then Zod parse round-trip to confirm no missing
defaults or stray fields.
Suite: 59 tests across 6 files; typecheck + lint clean. Outbound
factories and the toShareLink extraction follow next.
* refactor(frontend): add getHeaderValue wire-shape lookup to lib/xray/headers
Tiny piece of the toShareLink scaffold. The legacy Inbound.getHeader(obj,
name) iterated the panel's internal HeaderEntry[] form; the new
getHeaderValue reads the Record<string, string|string[]> map our Zod
schemas store on the wire. Case-insensitive, returns '' on miss to match
the legacy fallback so link-generator call sites stay simple.
For repeated-name maps (TCP/WS-style string[] values) the first value
wins — matches the legacy iteration order so the share URL's Host hint
stays deterministic.
Five unit tests cover undefined/null/empty inputs, case folding,
string-valued and array-valued matches, empty-array edge case, and
missing-key fallback. Suite: 64 tests across 6 files; typecheck + lint
clean.
This unblocks the next slice: per-protocol link generators (genVmessLink
etc.) take a typed inbound + client and call getHeaderValue against the
ws/httpupgrade/xhttp/tcp.request header maps.
* feat(frontend): stream extras + full InboundSchema with DU intersection
Step 3d's last scaffolding piece before link generators. Three new
stream-extras schemas land alongside the network/security DUs:
- finalmask: TcpMask[] + UdpMask[] + QuicParams. Mask `settings` stays
record<string, unknown> for now — there are 13 UDP mask types and 3
TCP mask types with distinct per-type setting shapes, and modeling
them all as DUs would dwarf the rest of stream/ without buying
anything the shadow harness doesn't already catch. Tightened in
Step 6.
- sockopt: 17 socket-tuning knobs (TCP keepalive, TFO, mark, tproxy,
mptcp, dialer proxy, IPv6-only, congestion). `interfaceName` field
matches the panel class naming; serializers rename to `interface` on
the wire.
- external-proxy: rows ship per inbound describing edge fronts (CDN
mirrors). Used by link generators to fan out share URLs.
schemas/api/inbound.ts composes the top-level wire shape with
intersection-of-DUs:
StreamSettingsSchema = NetworkSettingsSchema
.and(SecuritySettingsSchema)
.and(StreamExtrasSchema)
InboundSchema = InboundCoreSchema.and(InboundSettingsSchema)
A fixture (vless-ws-tls.json) exercises the full shape — protocol DU,
network DU, security DU, and TLS cert file branch in one round trip.
The snapshot pins the canonical parsed form so the upcoming link
extractor consumes typed input with no class hierarchy underneath.
Suite: 65 tests across 7 files; typecheck + lint clean. Zod 4
intersection-of-DUs works.
* refactor(frontend): extract genVmessLink to lib/xray/inbound-link.ts
First link generator to leave the class hierarchy. genVmessLink takes a
typed Inbound + client args and returns the base64-encoded vmess://
URL. Internal helpers (buildXhttpExtra, applyXhttpExtraToObj,
applyFinalMaskToObj, applyExternalProxyTLSObj, serializeFinalMask,
hasShareableFinalMaskValue, externalProxyAlpn) port across from
XrayCommonClass — same logic, rewritten to read the Zod schemas'
Record<string, string> headers instead of the legacy HeaderEntry[].
Parity test (inbound-link.test.ts) loads each vmess fixture in
golden/fixtures/inbound-full, parses it with InboundSchema for the new
pure fn AND constructs LegacyInbound.fromJson(raw) for the class method,
then asserts the URLs match byte-for-byte. Drift between the two impls
fails here before the call sites in pages/inbounds/* get swapped.
Adds a small test setup file that aliases globalThis.window to globalThis
so Base64.encode's window.btoa works under Node — keeps the test env at
'node' and avoids pulling jsdom as a new dep.
A first vmess-tcp-tls full-inbound fixture pins the round-trip path.
Suite: 67 tests across 8 files; typecheck + lint clean. Five more link
generators (vless/trojan/ss/hysteria/wireguard) plus the orchestrator
(toShareLink, genAllLinks) follow in subsequent turns.
* test(frontend): refresh inbound-full snapshot with vmess-tcp-tls fixture
* refactor(frontend): extract genVlessLink to lib/xray/inbound-link
Second link generator. genVlessLink builds the
vless://<uuid>@<host>:<port>?<query>#<remark> share URL from a typed
Inbound + client args, dispatching on streamSettings.network for the
network-specific knobs and on streamSettings.security for the
TLS/Reality knobs. Three param-style helpers move alongside the obj-
style ones already in this file:
- applyXhttpExtraToParams — writes path/host/mode/x_padding_bytes and
the JSON extra blob into URLSearchParams
- applyFinalMaskToParams — writes the fm payload when shareable
- applyExternalProxyTLSParams — overrides sni/fp/alpn when an external
proxy entry is supplied and security is tls
A vless-tcp-reality fixture lands alongside the existing vless-ws-tls
one, so the parity test now exercises both security branches.
Discovered a latent legacy bug while writing parity: the old class
stored realitySettings.serverNames as a comma-joined string and gated
SNI on `!ObjectUtil.isArrEmpty(serverNames)`, which always returns true
for strings — so SNI was never written into Reality share URLs.
Existing clients rely on the omission (they pull SNI from
realitySettings.target instead). We preserve the omission here to keep
this extraction byte-stable; an inline comment marks the spot for a
separate intentional fix.
Suite: 70 tests across 8 files; typecheck + lint clean.
* refactor(frontend): extract genTrojanLink + genShadowsocksLink to lib/xray
Third and fourth link generators. genTrojanLink mirrors genVlessLink's
shape (URLSearchParams + network/security branches + remark hash) minus
the encryption/flow VLESS-isms. genShadowsocksLink shares the same query
construction but base64-encodes the userinfo portion as method:password
or method:settingsPw:clientPw depending on whether SS-2022 is in
single-user or multi-user mode.
Three reusable helpers move out of the per-protocol functions:
- writeNetworkParams: the per-network switch that all param-style
links share (tcp http header / kcp mtu+tti / ws path+host /
grpc serviceName+authority / httpupgrade / xhttp extras)
- writeTlsParams: fingerprint/alpn/ech/sni
- writeRealityParams: pbk/sid/spx/pqv (preserves the SNI-omission
legacy parity quirk noted in the genVlessLink commit)
genVmessLink stays with its inline switch — it builds a JSON obj instead
of URLSearchParams and has per-network quirks (kcp emits mtu+tti at
the obj root, grpc maps multiMode to obj.type='multi') that don't
factor cleanly through the shared writer.
Two new full-inbound fixtures (trojan-ws-tls, shadowsocks-tcp-2022)
plus matching parity tests bring the suite to 74 tests across 8 files;
typecheck + lint clean.
* refactor(frontend): extract genHysteriaLink + Wireguard link/config to lib/xray
Fifth and sixth link generators. genHysteriaLink builds the v1/v2
share URL (scheme picked from settings.version), copying TLS knobs into
the query, surfacing the salamander obfs password from
finalmask.udp[type=salamander] when present, and writing the broader
finalmask payload under `fm` like the other links.
Legacy parity note: the old genHysteriaLink read
stream.tls.settings.allowInsecure, which isn't a field on
TlsStreamSettings.Settings — the guard always evaluated false and the
`insecure` param never made it into the URL. We omit it here to stay
byte-stable.
genWireguardLink and genWireguardConfig take a typed
WireguardInboundSettings + peer index and:
- link: wireguard://<peerPriv>@host:port?publickey=&address=&mtu=#remark
- config: the .conf text WireGuard clients consume directly
Both derive the server pubKey from settings.secretKey via
Wireguard.generateKeypair at call time — Zod stores only secretKey on
the wire (pubKey is computed). The Wireguard utility is pure JS (X25519
over Float64Array), so it runs fine under node + the window polyfill we
added with the vmess extraction.
Two new full-inbound fixtures (hysteria-v1-tls, wireguard-server) plus
matching parity tests bring the suite to 78 tests across 8 files;
typecheck + lint clean.
Hysteria2 (protocol literal) parity stays deferred — the legacy
class has no HYSTERIA2 dispatch case, so it can't round-trip a
hysteria2 fixture without a protocol remap. Same trick the shadow
harness uses; revisit in the orchestrator commit.
* refactor(frontend): extract share-link orchestrator to lib/xray/inbound-link
Last slice of Step 3d. Five orchestrator exports compose the per-
protocol generators into the public surface the panel consumes:
- resolveAddr(inbound, hostOverride, fallbackHostname): picks the
address that goes into share/sub URLs. Browser `location.hostname`
is no longer a hidden dependency — callers pass it in (or any other
fallback they want).
- getInboundClients(inbound): protocol-aware clients accessor.
Mirrors the legacy `Inbound.clients` getter, including the SS
quirk where 2022-blake3-chacha20 single-user inbounds report null
(no client loop) and everything else returns the clients array.
- genLink: per-protocol dispatcher matching legacy Inbound.genLink.
- genAllLinks: per-client fanout. Builds the remarkModel-formatted
remark (separator + 'i'/'e'/'o' field picker) and iterates
streamSettings.externalProxy when present.
- genInboundLinks: top-level \r\n-joined link block. Loops per
client for clientful protocols, single-shots SS for non-multi-user,
and delegates to genWireguardConfigs for wireguard. Returns ''
for http/mixed/tunnel (no share URL at all).
Plus genWireguardLinks / genWireguardConfigs fanouts which iterate
peers and append index-suffixed remarks.
Parity test exercises every full-inbound fixture against legacy
Inbound.genInboundLinks. Skips hysteria2 (no legacy dispatch case;
that bridge belongs in a separate intentional commit alongside the
form modal swap). Suite: 89 tests across 8 files; typecheck + lint
clean.
Next: Step 4 form modal migrations. Forms can now drop
`new Inbound.Settings.getSettings(protocol)` in favor of the
createDefault*InboundSettings factories, and InboundsPage clone can
swap to genInboundLinks. Models/ deletion follows in Step 5 once all
call sites are off the class.
* refactor(frontend): swap InboundsPage clone fallback off Inbound.Settings.getSettings
First Step 4 call-site swap. createDefaultInboundSettings(protocol) lands
in lib/xray/inbound-defaults — a protocol-aware dispatch over the 10
per-protocol settings factories already in this module. Returns a Zod-
parsable plain object instead of a class instance, so callers that just
need the wire-shape JSON can drop the class hierarchy without touching
the broader form modals.
InboundsPage's clone path used Inbound.Settings.getSettings(p).toString()
as the fallback when settings JSON parsing failed. That's now
createDefaultInboundSettings + JSON.stringify, with a final '{}' guard
for unknown protocols (legacy returned null and .toString() crashed —
we just emit empty settings instead). The Inbound import on this file
is now unused and removed.
The 2 remaining getSettings call sites in InboundFormModal aren't safe
to swap in isolation — the form mutates the returned class instance
through methods like .addClient() and .toJson() across ~2000 lines of
JSX. Those land with the full Pattern A rewrite of InboundFormModal,
which the plan budgets at multiple days on its own.
Suite: 89 tests across 8 files; typecheck + lint clean.
* refactor(frontend): lift Protocols + TLS_FLOW_CONTROL consts to schemas/primitives
Step 4b. The Protocols and TLS_FLOW_CONTROL enums on models/inbound.ts
were dragging five page files into that 3,300-line module just to read
literal string constants. Lifting them to schemas/primitives lets those
pages drop the @/models/inbound import entirely.
- schemas/primitives/protocol.ts now exports a Protocols const map
alongside the existing ProtocolSchema. TUN stays in the const for
parity (legacy panel deployments may have saved TUN inbounds) even
though the Go validator no longer accepts it as a new write.
- schemas/primitives/flow.ts now exports TLS_FLOW_CONTROL. The
empty-string default isn't keyed because the legacy never had a
NONE entry — call sites compare against the two real flow values.
Updated five consumers:
- useInbounds.ts: TRACKED_PROTOCOLS now annotated readonly string[]
so .includes(string) keeps narrowing through the array literal
- QrCodeModal.tsx, InboundInfoModal.tsx: Protocols
- ClientFormModal.tsx, ClientBulkAddModal.tsx: TLS_FLOW_CONTROL
Suite: 89 tests across 8 files; typecheck + lint clean.
models/inbound.ts is now imported by:
- InboundFormModal.tsx (heavy use of Inbound class + getSettings)
- test/inbound-link.test.ts + test/shadow.test.ts + test/headers.test.ts
(intentional — these are parity tests against the legacy class)
OutboundFormModal still imports from models/outbound. Both form modals
are the multi-day Pattern A rewrites the plan scopes separately.
* refactor(frontend): lift OutboundProtocols + OutboundDomainStrategies to schemas/primitives
Moves the two outbound-side consts out of models/outbound.ts and into
schemas/primitives/outbound-protocol.ts. Renames the export to
OutboundProtocols to disambiguate from the inbound Protocols const
(different key casing — PascalCase vs ALL CAPS — and partly different
member set, so they cannot share a single const).
OutboundsTab.tsx keeps its 15+ Protocols.X call sites by aliasing
the import. FinalMaskForm.tsx and BasicsTab.tsx swap directly.
Drops a stale `as string[]` cast in BasicsTab that no longer fits
the new readonly-tuple typing.
After this commit only the two big form modals
(InboundFormModal/OutboundFormModal) plus three intentional parity
tests still import from @/models/.
* refactor(frontend): lift outbound option dictionaries to schemas/primitives
Adds schemas/primitives/options.ts with UTLS_FINGERPRINT, ALPN_OPTION,
SNIFFING_OPTION, USERS_SECURITY, MODE_OPTION (all identical between
models/inbound.ts and models/outbound.ts) plus the outbound-only
WireguardDomainStrategy, Address_Port_Strategy, and DNSRuleActions.
OutboundFormModal now pulls 9 consts from primitives. Only `Outbound`
(the class) and `SSMethods` (whose inbound/outbound versions diverge by
2 legacy aliases — keep the picker open for the Pattern A rewrite) still
come from @/models/outbound.
Drops three stale `as string[]` casts on what are now readonly tuples.
* refactor(frontend): swap InboundFormModal option dicts to schemas/primitives
Extends primitives/options.ts with the five inbound-only option dicts
(TLS_VERSION_OPTION, TLS_CIPHER_OPTION, USAGE_OPTION,
DOMAIN_STRATEGY_OPTION, TCP_CONGESTION_OPTION) and lifts InboundFormModal
off @/models/inbound for 10 of its 12 imports. Only the Inbound class
and SSMethods (inbound vs outbound versions diverge by 2 entries) still
come from @/models/.
Widens NODE_ELIGIBLE_PROTOCOLS Set element type to string since the new
primitives const exposes a narrow literal union that `.has(arbitraryString)`
would otherwise reject.
* feat(frontend): InboundFormValues schema for Pattern A rewrite
Foundation for the InboundFormModal rewrite. Mirrors the wire Inbound
shape (intersection of core fields + protocol settings DU + stream/security
DUs) plus the DB-side fields (up/down/total/trafficReset/nodeId/...) that
flow through DBInbound rather than the xray config slice.
InboundStreamFormSchema is exported separately so individual sub-form
sections can rule against just the stream portion when needed.
FallbackRowSchema is co-located here even though fallbacks save via a
distinct endpoint after the main POST — they belong to the same form
state from the user's perspective.
No modal changes in this commit. Foundation only; subsequent turns swap
the modal's `inboundRef`/`dbFormRef` mutable-class state for
Form.useForm<InboundFormValues>().
* feat(frontend): adapter between raw inbound rows and InboundFormValues
Adds lib/xray/inbound-form-adapter.ts with rawInboundToFormValues and
formValuesToWirePayload. The pair is the data boundary the upcoming
Pattern A modal will use: it consumes the DB row shape (settings et al.
as string OR object — coerced internally), hands the modal typed
InboundFormValues, and on submit reverses the trip to a wire payload
with the three JSON-stringified slices the Go endpoints expect.
No dependency on the legacy Inbound/DBInbound classes — the coerce step
is inlined so the adapter survives the eventual models/ deletion.
Adds 10 Vitest cases covering string vs object inputs, the optional
streamSettings/nodeId fields, trafficReset coercion, and a raw-to-payload
-to-raw round-trip equality.
* feat(frontend): protocol capability predicates as pure functions
Adds lib/xray/protocol-capabilities.ts with the seven predicates the
modals call: canEnableTls, canEnableReality, canEnableTlsFlow,
canEnableStream, canEnableVisionSeed, isSS2022, isSSMultiUser. Each
takes a minimal slice of an InboundFormValues, no class instance.
The legacy isSSMultiUser returns true on non-shadowsocks protocols too
(method getter resolves to "" which != blake3-chacha20-poly1305). The
new function preserves this quirk and documents it inline; callers all
narrow on protocol === shadowsocks before checking, so the surprising
return value never surfaces.
Parity harness in test/protocol-capabilities.test.ts crosses each of
the 10 golden fixtures with 14 stream configurations (network × security)
and asserts each predicate matches the legacy class method — 140 cases,
all green.
* feat(frontend): outbound settings factories + dispatcher
Adds lib/xray/outbound-defaults.ts parallel to inbound-defaults.ts:
13 createDefault*OutboundSettings factories (one per outbound protocol)
plus the createDefaultOutboundSettings(protocol) dispatcher mirroring
Outbound.Settings.getSettings's contract — non-null on each known
protocol, null otherwise.
The factory output matches the legacy `new Outbound.<X>Settings()` start
state: required-by-schema fields the user fills in via the form
(address, port, password, id, peer publicKey/endpoint) come back as
empty stubs. Wireguard alone seeds secretKey via the X25519 generator;
the rest expose blank fields. This is the same behavior the
OutboundFormModal relies on for protocol-change resets.
Shadowsocks defaults to 2022-blake3-aes-128-gcm rather than the legacy
undefined — the Select snaps to the first option anyway, so the
coherent default keeps the modal from rendering an empty picker.
Tests cover three layers:
- exact-shape snapshots per factory (13 cases)
- Zod schema acceptance after sensible stub fill-in (13 cases)
- dispatcher non-null per known protocol + null for the unknown (14 cases)
* feat(frontend): InboundFormModal.new.tsx skeleton (Pattern A)
First commit of the sibling-file modal rewrite. The new modal mounts
Form.useForm<InboundFormValues>, hydrates via rawInboundToFormValues on
open (edit) or buildAddModeValues (add), runs validateFields + safeParse
on submit, and posts the formValuesToWirePayload result. No tabs yet —
the modal body shows a WIP placeholder.
The file is not imported anywhere; the existing InboundFormModal.tsx
remains the one InboundsPage renders. Build, lint, and 280 tests stay
green. Subsequent commits add the basic / sniffing / protocol / stream /
security / advanced / fallbacks sections; the atomic import swap in
InboundsPage.tsx lands last.
* feat(frontend): basic tab on InboundFormModal.new.tsx (Pattern A)
First real section of the sibling-file rewrite. Wires AntD Form.Items
to InboundFormValues paths for the basic tab — enable, remark, deployTo
(when protocol is node-eligible), protocol, listen, port, totalGB,
trafficReset, expireDate.
The port input gets a per-field antdRule against
InboundFormBaseSchema.shape.port — the spec's Pattern A reference. The
intersection-typed InboundFormSchema has no .shape accessor, so per-field
rules pull from the underlying ZodObject components.
totalGB and expireDate are bytes/timestamp on the wire but a GB number /
dayjs picker in the UI. Both use shouldUpdate-closure children that read
form state and call setFieldValue on user input — no transient
form-only fields, no DU-shape surprises at submit time.
Protocol-change cascade lives in Form's onValuesChange: pick a new
protocol and the settings DU branch is reset to
createDefaultInboundSettings(next); a non-node-eligible protocol also
clears nodeId.
Modal still renders a single-tab Tabs container. Sniffing tab is next.
* feat(frontend): sniffing tab on InboundFormModal.new.tsx (Pattern A)
Second section of the sibling-file rewrite. Wires the six sniffing
sub-fields to nested form paths ['sniffing', 'enabled'], ['sniffing',
'destOverride'], etc. Uses Form.useWatch on the enabled flag to drive
conditional rendering of the dependent fields — the same gate the
legacy modal expressed via `ib.sniffing.enabled &&`.
Checkbox.Group renders one Checkbox per SNIFFING_OPTION entry. The two
exclusion lists use Select mode="tags" so the user can paste comma-
separated IP/CIDR or domain rules.
No transient form state, no class methods — every field maps directly
to a wire-shape path in InboundFormValues.
Protocol tab is next.
* feat(frontend): protocol tab VLESS auth on InboundFormModal.new.tsx
Adds the protocol tab to the sibling-file rewrite — currently only the
VLESS section, which lays out decryption/encryption inputs and the three
buttons that drive them: Get New x25519, Get New mlkem768, Clear.
getNewVlessEnc + clearVlessEnc are ported from the legacy modal as
pure setFieldValue paths into ['settings', 'decryption'] /
['settings', 'encryption'] — no class methods, no inboundRef. The
matchesVlessAuth helper mirrors the legacy fuzzy label-matching so the
backend response shape stays the only source of truth.
selectedVlessAuth derives the displayed auth label from the encryption
string via Form.useWatch — same heuristic as the legacy modal
(.length > 300 → mlkem768, otherwise x25519).
Tab spread is conditional: the protocol tab only appears when
protocol === 'vless' right now. As more protocol sections land
(shadowsocks, http/mixed, tunnel, tun, wireguard) the condition will
widen to cover each one.
* feat(frontend): protocol tab Shadowsocks section (Pattern A)
Adds the Shadowsocks sub-form: method picker (from SSMethodSchema's
seven schema-aligned options), conditional password input gated on
isSS2022, network picker (tcp/udp/tcp,udp), ivCheck toggle.
Method change cascades through the Select's onChange — regenerating
the inbound-level password via RandomUtil.randomShadowsocksPassword.
The shadowsockses[] multi-user list reset is deferred until the
clients-management section lands.
Uses isSS2022 from lib/xray/protocol-capabilities to gate the password
field exactly the way the legacy modal did — keeps the form behavior
identical without referencing the legacy class.
SSMethodSchema.options drives the Select rather than the legacy
SSMethods const (which the inbound modal pulled from models/inbound.ts).
This commits to the schema-aligned 7-entry list for inbound; the
outbound divergence (9 entries with legacy aliases) is still pending
in OutboundFormModal — defer the UX decision to that rewrite.
* feat(frontend): protocol tab HTTP and Mixed sections (Pattern A)
Adds the HTTP and Mixed sub-forms. Both share an accounts list — first
Form.List usage in the rewrite. Each row binds via [field.name, 'user']
/ [field.name, 'pass'] under the parent ['settings', 'accounts'] path,
so the wire shape stays exactly what HttpInboundSettingsSchema and
MixedInboundSettingsSchema validate.
HTTP-only: allowTransparent Switch.
Mixed-only: auth Select (noauth/password), udp Switch, conditional ip
Input gated on the udp value via Form.useWatch.
Tab visibility widens to include http + mixed alongside vless +
shadowsocks. The string cast on the includes-check keeps the frozen
Protocols const's narrow union from rejecting the broader protocol
string at the call site.
* feat(frontend): protocol tab Tunnel section (Pattern A)
Adds the Tunnel sub-form: rewriteAddress + rewritePort, allowedNetwork
picker (tcp/udp/tcp,udp), Form.List-driven portMap with name/value
pairs, and the followRedirect Switch.
portMap is the second Form.List in the rewrite — same shape as the
HTTP/Mixed accounts list but with name/value rather than user/pass.
The wire shape stays `settings.portMap: { name, value }[]` exactly.
Tab visibility widens to Tunnel.
* feat(frontend): protocol tab TUN section (Pattern A)
Adds the TUN sub-form: interface name, MTU, four primitive-array
Form.Lists (gateway, dns, autoSystemRoutingTable), userLevel,
autoOutboundsInterface.
Primitive Form.Lists bind each row's Input directly to `field.name`
(no inner key) — distinct from the object-row Form.Lists that bind to
`[field.name, 'fieldKey']`.
The Form.useWatch('protocol') return type comes from the schema's
protocol enum which excludes 'tun' (TUN is in the legacy Protocols
const for data parity but never accepted by the wire validator). Cast
to string at the source so per-section comparisons against
Protocols.TUN typecheck. Why: legacy DB rows with protocol === 'tun'
still need to render; widening here keeps reads from rejecting them.
Tab visibility widens to TUN.
* feat(frontend): protocol tab Wireguard section (Pattern A)
Adds the Wireguard sub-form: server secretKey input with regen icon,
derived disabled public-key display, mtu, noKernelTun toggle, and a
Form.List of peers — each peer having its own privateKey (regen icon),
publicKey, preSharedKey, allowedIPs (nested Form.List for the string
array), keepAlive.
pubKey is purely derived (computed via Wireguard.generateKeypair from
the watched secretKey) and is NOT stored in the form value — the schema
omits it from the wire shape on purpose. The disabled display shows the
live derivation without polluting form state.
regenInboundWg generates a fresh keypair and writes only the
secretKey path; pubKey re-derives automatically. regenWgPeerKeypair
writes both privateKey and publicKey at the peer's path index.
The preSharedKey wire-shape name is used instead of the legacy class's
internal psk — matches WireguardInboundPeerSchema.
Tab visibility widens to Wireguard.
* feat(frontend): stream tab skeleton with TCP + KCP (Pattern A)
Opens the stream tab on the sibling-file rewrite. Tab visibility is
driven by canEnableStream from lib/xray/protocol-capabilities — same
gate the legacy modal used, now schema-aware.
Transmission picker (network select) is hidden for HYSTERIA since
that protocol's network is implicit. onNetworkChange clears any stale
per-network settings keys (tcpSettings/kcpSettings/...) and seeds an
empty object for the new branch so AntD Form.Items don't read from
undefined nested paths.
TCP section: acceptProxyProtocol Switch (literal-true-optional on the
wire — the form stores true/false but Zod's strip behavior keeps
false-as-omission round-trips clean) plus an HTTP-camouflage toggle
that flips header.type between 'none' and 'http'. The full HTTP
camouflage request/response sub-form lands in a follow-up commit.
KCP section: six numeric knobs (mtu, tti, upCap, downCap,
cwndMultiplier, maxSendingWindow).
WS / gRPC / HTTPUpgrade / XHTTP / external-proxy / sockopt / hysteria
stream / FinalMaskForm hookup all still pending.
* feat(frontend): stream tab WS + gRPC + HTTPUpgrade sections (Pattern A)
Adds the three medium-complexity network branches to the stream tab.
Plain Form.Item paths into the corresponding *Settings keys — no
Form.List wrappers since these schemas don't have arrays at the top
level.
WS: acceptProxyProtocol, host, path, heartbeatPeriod
gRPC: serviceName, authority, multiMode
HTTPUpgrade: acceptProxyProtocol, host, path
Header editing is deferred to a later commit — WsHeaderMap is a
Record<string,string> on the wire, V2HeaderMap a Record<string,string[]>,
and the form needs an array-of-{name,value} UI that converts on edit.
Worth building once and reusing across WS, HTTPUpgrade, XHTTP, TCP
request/response, and Hysteria masquerade headers.
XHTTP + external-proxy + sockopt + hysteria stream + finalmask hookup
still pending.
* feat(frontend): stream tab XHTTP section (Pattern A)
XHTTP is the heaviest network branch — 19 fields rendered conditionally
on mode, xPaddingObfsMode, and the three *Placement selectors. Each
gates its dependent field set via Form.useWatch.
Field structure mirrors the legacy XHTTPStreamSettings form 1:1:
- mode picker (auto / packet-up / stream-up / stream-one)
- packet-up adds scMaxBufferedPosts + scMaxEachPostBytes; stream-up
adds scStreamUpServerSecs
- serverMaxHeaderBytes, xPaddingBytes, uplinkHTTPMethod (with the
packet-up gate on the GET option)
- xPaddingObfsMode unlocks xPadding{Key,Header,Placement,Method}
- sessionPlacement / seqPlacement each unlock their respective Key
field when set to anything other than 'path'
- packet-up mode additionally unlocks uplinkDataPlacement, and that
in turn unlocks uplinkDataKey when the placement is not 'body'
- noSSEHeader Switch at the tail
XHTTP headers editor still pending (same WsHeaderMap as WS — will be
unified in the header-editor extraction commit).
* feat(frontend): stream tab external-proxy + sockopt sections (Pattern A)
External Proxy: Switch driven by externalProxy array length. Toggling
on seeds one row with the window hostname + the inbound's current port;
toggling off clears the array. Each row is a Form.List item with
forceTls/dest/port/remark inline, and a nested SNI/Fingerprint/ALPN
row that conditionally renders on forceTls === 'tls' via a
shouldUpdate-closure that watches the per-row forceTls path.
Sockopt: Switch driven by whether the sockopt object exists in form
state. Toggling on calls SockoptStreamSettingsSchema.parse({}) so every
default the schema declares (mark=0, tproxy='off', domainStrategy='UseIP',
tcpcongestion='bbr', etc.) flows into the form; toggling off sets to
undefined.
Renders the seventeen sockopt fields directly bound to
['streamSettings', 'sockopt', X] paths. Option lists pull from the
primitives const dictionaries (UTLS_FINGERPRINT, ALPN_OPTION,
DOMAIN_STRATEGY_OPTION, TCP_CONGESTION_OPTION) rather than the
schema's .options to keep one source of truth for UI label strings.
* feat(frontend): security tab base + TLS section (Pattern A)
Adds the security tab to the sibling-file rewrite. Visibility is paired
with the stream tab — both gated on canEnableStream. The security
selector is itself disabled when canEnableTls is false, and the reality
option only appears when canEnableReality is true, mirroring the legacy
modal's Radio.Group guards.
onSecurityChange clears the previous branch's *Settings key and seeds
the new branch from the schema's parsed defaults (the same trick the
sockopt toggle uses). The security selector itself is rendered via a
shouldUpdate closure so the on-change handler can write the cleaned
streamSettings shape atomically without racing AntD's per-field sync.
TLS section: serverName (the wire field — the legacy class calls it
sni internally), cipherSuites (with the 13 named suites from
TLS_CIPHER_OPTION), min/max version pair, uTLS fingerprint, ALPN
multi-select, plus the three policy Switches.
TLS certificates list, ECH controls, the full Reality sub-form, and
the four API-call buttons (genRealityKeypair / genMldsa65 / getNewEchCert
/ randomizers) land in a follow-up commit.
* feat(frontend): security tab Reality + ECH + mldsa65 controls (Pattern A)
Adds the Reality sub-form and the four API-call buttons that drive
the server-generated material:
- genRealityKeypair calls /panel/api/server/getNewX25519Cert and writes
the result into ['streamSettings', 'realitySettings', 'privateKey']
and the nested settings.publicKey path.
- genMldsa65 calls /panel/api/server/getNewmldsa65 for the
post-quantum seed/verify pair.
- getNewEchCert calls /panel/api/server/getNewEchCert with the current
serverName and writes echServerKeys + settings.echConfigList.
- randomizeRealityTarget seeds target + serverNames from the random
reality-targets pool.
- randomizeShortIds calls RandomUtil.randomShortIds (comma-joined
string) and splits into the schema's string[] form.
Reality fields are bound directly to schema paths — show/xver/target,
maxTimediff, min/max ClientVer, the settings.{publicKey, fingerprint,
spiderX, mldsa65Verify} nested subtree, plus the array fields
(serverNames, shortIds) rendered as Select mode="tags" since both ship
as string[] on the wire.
TLS certificates list (Form.List with the useFile DU) still pending —
that's a chunky sub-form on its own.
* feat(frontend): security tab TLS certificates list (Pattern A)
Closes out the security tab: a Form.List of certificates that toggles
between TlsCertFileSchema (certificateFile + keyFile string paths) and
TlsCertInlineSchema (certificate + key as string arrays per the wire
shape) via a per-row useFile boolean.
useFile is a transient form-only field — not part of TlsCertSchema.
Zod's default-strip behavior drops it during InboundFormSchema parse
on submit, leaving only the matching wire branch's keys populated.
Whichever side the user wasn't on stays empty, so Zod's union picks
the populated branch.
For inline certs the TextAreas use normalize + getValueProps to convert
between the wire-side string[] and the multi-line text the user types.
Each line becomes one array element, matching the legacy class's
`cert.split('\n')` toJson convention.
Per-row buildChain is conditionally rendered when usage === 'issue' —
a shouldUpdate-closure watches the specific path so the toggle
re-renders inline without listening to unrelated form changes.
Security tab is now functionally complete. Advanced JSON tab,
Fallbacks card, and the atomic swap in InboundsPage are next.
* feat(frontend): advanced JSON tab on InboundFormModal.new.tsx (Pattern A)
Adds the advanced JSON tab. Each sub-tab (settings / streamSettings /
sniffing) renders an AdvancedSliceEditor — a small CodeMirror-backed
JsonEditor that holds a local text buffer and forwards parsed JSON to
form state on every valid edit.
Invalid JSON sits silently in the local buffer; once the user finishes
balancing braces / quoting, the next valid parse pushes through to the
form. No stamping ref, no apply-on-tab-switch ceremony — the form is
the single source of truth.
The buffer seeds once from form state on mount. The Modal's
destroyOnHidden means each open is a fresh editor instance, so external
form mutations during a single open session can't desync the editor
either.
The streamSettings sub-tab is omitted when streamEnabled is false
(matching the legacy modal's behavior for protocols like Http / Mixed
that have no stream layer).
* feat(frontend): fallbacks card on InboundFormModal.new.tsx (Pattern A)
Adds the fallbacks card rendered inside the protocol tab whenever the
current values describe a fallback host — VLESS or Trojan on tcp with
tls or reality security. The protocol tab visibility widens to include
Trojan in that exact case (it has no other protocol sub-form).
Fallbacks live in a useState alongside the form rather than inside form
values, mirroring the legacy modal: fallbacks save via a distinct
endpoint (/panel/api/inbounds/{id}/fallbacks) after the main inbound
POST, not as part of the inbound payload. loadFallbacks runs on open
for edit-mode VLESS/Trojan; saveFallbacks runs after a successful POST
inside the submit handler.
Each row: child picker (filtered down to other inbounds), then four
inline edits for SNI / ALPN / path / xver. Add adds an empty row;
delete pulls the row from state.
Quick-Add-All, the rederive-from-child helper, and the per-row up/down
movers are deferred — the basic add/edit/remove cycle is what the modal
actually needs to function.
* feat(frontend): atomic swap InboundFormModal to Pattern A
Deletes the 2261-line class-mutation modal and renames the
1900-line sibling rewrite into its place. InboundsPage.tsx already
imports the file by path so no consumer change is needed — the swap
is one file delete plus one file rename. Build, lint, and 280 tests
stay green.
What the new modal covers end-to-end:
- Basic (enable / remark / nodeId / protocol / listen / port /
totalGB / trafficReset / expireDate)
- Sniffing (enabled / destOverride / metadataOnly / routeOnly /
ipsExcluded / domainsExcluded)
- Protocol per DU branch: VLESS (decryption/encryption + buttons),
Shadowsocks (method/password/network/ivCheck), HTTP + Mixed
(accounts list + per-protocol toggles), Tunnel (rewrite + portMap +
followRedirect), TUN (interface/mtu + four primitive lists +
userLevel/autoInterface), Wireguard (secretKey + derived pubKey +
peers list with nested allowedIPs)
- Stream per network: TCP base, KCP, WS, gRPC, HTTPUpgrade, XHTTP
(the 22-field one), plus external-proxy and sockopt extras
- Security: TLS (SNI/cipher/version/uTLS/ALPN/policy switches +
certificates list with file/inline toggle + ECH controls), Reality
(every field + the four API-call buttons), none
- Advanced JSON (settings / streamSettings / sniffing live editors
that round-trip into form state on every valid parse)
- Fallbacks (load on open for VLESS/Trojan TLS-or-Reality TCP hosts;
save through the secondary endpoint after the main POST succeeds)
Known regressions vs the legacy modal, all reachable via Advanced JSON
until backfilled in follow-up commits:
- Hysteria stream sub-form (masquerade / udpIdleTimeout / version) —
schema gap; the existing inbound DU has no hysteria stream branch
- FinalMaskForm hookup — the component is still class-shape coupled
- HeaderMapEditor — TCP request/response headers, WS / HTTPUpgrade /
XHTTP headers, Hysteria masquerade headers all need a shared editor
- TCP HTTP camouflage request/response body (version, method, path
list, headers, status, reason) — only the on/off toggle is wired
- Fallbacks polish — up/down move, quick-add-all, rederive-from-child,
the per-row advanced-toggle / proxy-tag chips
No reference to @/models/inbound's Inbound class anywhere in the new
modal — only @/models/dbinbound (out of scope) and
@/models/reality-targets (out of scope). The protocol-capabilities
predicates and the rawInboundToFormValues + formValuesToWirePayload
adapters carry every behavior the class used to provide.
* fix(frontend): finish InboundFormModal rename after atomic swap
The atomic-swap commit landed the new file but the exported function was
still named InboundFormModalNew. Rename to match the file.
* feat(frontend): outbound form schema + wire adapter foundation
Lay the groundwork for OutboundFormModal's Pattern A rewrite:
- schemas/forms/outbound-form.ts: discriminated-union form values across
all 12 outbound protocols, with flat per-protocol settings shapes that
match the legacy class fields (vmess vnext / trojan-ss-socks-http
servers / wireguard csv address-reserved all flattened).
- lib/xray/outbound-form-adapter.ts: rawOutboundToFormValues converts
wire-shape outbound JSON to typed form values; formValuesToWirePayload
re-nests on submit. Replaces the Outbound.fromJson/toJson dependency
the modal currently has on the legacy class hierarchy.
- test/outbound-form-adapter.test.ts: 15 round-trip cases covering each
protocol's wire quirks (vmess vnext flatten, vless reverse-wrap,
wireguard csv↔array, blackhole response wrap, DNS rule normalization,
mux gating).
* feat(frontend): OutboundFormModal.new.tsx skeleton (Pattern A)
Sibling .new.tsx file with the Modal shell, Tabs (Basic/JSON), Form.useForm
hydration via rawOutboundToFormValues, and the submit pipeline that calls
formValuesToWirePayload before onConfirm. Tag uniqueness check is wired in.
Protocol-specific sub-forms, stream, security, sockopt, and mux sections
are deferred to subsequent commits — accessible via the JSON tab in the
meantime. The InboundsPage continues to render the legacy modal until the
atomic swap at the end.
Also: rawOutboundToFormValues now returns streamSettings as undefined
when the wire payload omits it, so Form.useForm doesn't receive a value
that does not match the NetworkSettings discriminated union.
* feat(frontend): OutboundFormModal.new.tsx vmess/vless/trojan/ss sections
- Shared connect-target sub-block (address + port) for the six protocols
whose form schema carries them flat at settings root.
- VMess: id + security Select (USERS_SECURITY).
- VLESS: id + encryption + flow + reverseTag (reverse-sniffing slice and
Vision testpre/testseed come in a later commit).
- Trojan: password.
- Shadowsocks: password + method Select (SSMethodSchema) + UoT switch +
UoT version.
onValuesChange cascade: when the user picks a different protocol, the
adapter re-seeds the settings sub-object to the new protocol's defaults
so leftover fields from the previous protocol do not bleed through.
* feat(frontend): OutboundFormModal.new.tsx socks/http/hysteria/loopback/blackhole/wireguard sections
- SOCKS / HTTP: user + pass at settings root.
- Hysteria: read-only version=2 (the actual transport knobs live on
stream.hysteria, added with the stream tab).
- Loopback: inboundTag.
- Blackhole: response type Select with empty/none/http options.
- Wireguard: address (csv) + secretKey (with regenerate icon) + derived
pubKey + domain strategy + MTU + workers + no-kernel-tun + reserved
(csv) + peers Form.List with nested allowedIPs sub-list.
Wireguard regenerate icon uses Wireguard.generateKeypair() and writes
both keys to the form via setFieldValue — preserves the legacy UX of
the SyncOutlined inline-icon next to the privateKey label.
* feat(frontend): OutboundFormModal.new.tsx DNS + Freedom + VLESS reverse-sniffing
- DNS: rewriteNetwork (udp/tcp Select) + rewriteAddress + rewritePort +
userLevel + rules Form.List (action/qtype/domain).
- Freedom: domainStrategy + redirect + Fragment Switch with conditional
4-field sub-block (legacy 'enable Fragment' UX preserved — Switch sets
all four fields to populated defaults, off-state empties them all out
so the adapter strips them on submit) + Noises Form.List (rand/base64/
str/hex types, packet/delay/applyTo per row) + Final Rules Form.List
with conditional block-delay sub-field.
- VLESS reverse-sniffing slice: rendered only when reverseTag is set
(matches the legacy modal's nested conditional). All six fields wired
to the form state with appropriate widgets (Switch / Select multi /
Select tags).
* feat(frontend): OutboundFormModal.new.tsx stream tab (TCP/KCP/WS/gRPC/HTTPUpgrade)
Wire the stream sub-form into the Pattern A modal:
- newStreamSlice(network) helper bootstraps the per-network DU branch
with Xray defaults (mtu=1350, tti=20, uplinkCapacity=5, etc.).
- streamSettings is seeded once when the protocol supports streams
but the form has no slice yet (new outbound + protocol switch).
- onNetworkChange swaps the sub-key and preserves security when the
new network still supports it, else snaps back to 'none'.
- Per-network sub-forms wired:
TCP: HTTP camouflage Switch (sets header.type = 'http' / 'none')
KCP: 6 numeric tuning fields
WS: host + path + heartbeat
gRPC: service name + authority + multi-mode switch
HTTPUpgrade: host + path
XHTTP: host + path + mode + padding bytes (advanced fields via JSON)
Security radio, TLS/Reality sub-forms, sockopt, and mux still pending.
* feat(frontend): OutboundFormModal.new.tsx security tab (TLS + Reality + Flow)
- onSecurityChange cascade: swaps tlsSettings/realitySettings sub-key
matching the DU branch, seeding the new sub-form with empty/default
fields so the UI does not reference undefined values.
- Flow Select rendered when canEnableTlsFlow is true (VLESS + TCP +
TLS/Reality). Moved from the basic VLESS section so it only appears
in the relevant security context — matches the legacy modal UX.
- Security Radio (none / TLS / Reality) gated by canEnableTls and
canEnableReality pure-function predicates from
lib/xray/protocol-capabilities.
- TLS sub-form: 6 outbound-specific fields (SNI/uTLS/ALPN/ECH/
verifyPeerCertByName/pinnedPeerCertSha256) matching the legacy
TlsStreamSettings flat shape (no certificates list — outbound is
client-side).
- Reality sub-form: 6 fields (SNI/uTLS/shortId/spiderX/publicKey/
mldsa65Verify). publicKey + mldsa65Verify get TextAreas to handle
the long base64 strings.
* feat(frontend): OutboundFormModal.new.tsx sockopt + mux sections
- Sockopts: Switch toggles streamSettings.sockopt between undefined and
a populated default object (17 fields with sane bbr/UseIP defaults).
Only the 8 most-used fields are rendered (dialer proxy, domain
strategy, keep alive interval, TFO, MPTCP, penetrate, mark, interface).
The remaining sockopt knobs (acceptProxyProtocol, tcpUserTimeout,
tcpcongestion, tcpKeepAliveIdle, tcpMaxSeg, tcpWindowClamp, V6Only,
trustedXForwardedFor, tproxy) are still in the wire payload — edit
them via the JSON tab.
- Mux: gated by isMuxAllowed(protocol, flow, network) — VMess/VLESS/
Trojan/SS/HTTP/SOCKS, no flow set, no xhttp transport. Sub-fields
(concurrency / xudpConcurrency / xudpProxyUDP443) only render when
enabled is true.
- Sockopt section visible only when streamAllowed AND network is set —
non-stream protocols (freedom/blackhole/dns/loopback) still edit
sockopt via the JSON tab.
* feat(frontend): atomic swap OutboundFormModal to Pattern A
Delete the legacy 1473-line class-based OutboundFormModal.tsx and replace
it with the new Pattern A modal (Form.useForm + antdRule + per-protocol
discriminated-union form values + wire adapter).
Net diff: legacy file gone, function renamed from OutboundFormModalNew
to OutboundFormModal so the existing OutboundsTab import resolves
unchanged.
What is migrated:
- All 12 protocols (vmess/vless/trojan/ss/socks/http/wireguard/
hysteria/freedom/blackhole/dns/loopback)
- Stream tab with TCP/KCP/WS/gRPC/HTTPUpgrade + partial XHTTP
- Security tab with TLS + Reality + Flow gating
- Sockopt + Mux sections (gated by isMuxAllowed)
- JSON tab with bidirectional bridge to form state
- Tag uniqueness check
- VLESS reverse-sniffing slice
- Freedom fragment/noises/finalRules
- DNS rewrite + rules list
- Wireguard peers + nested allowedIPs sub-list
- Wireguard secret/public key regeneration
Deferred to follow-up commits (still accessible via the JSON tab):
- XHTTP advanced fields (xmux, sequence/session placement, padding obfs)
- Hysteria stream transport sub-form
- TCP HTTP camouflage host/path body
- WS/HTTPUpgrade/XHTTP headers map editor
- Remaining sockopt knobs (tcpUserTimeout, tcpcongestion, tcpKeepAliveIdle,
tcpMaxSeg, tcpWindowClamp, V6Only, trustedXForwardedFor, tproxy,
acceptProxyProtocol)
- VLESS Vision testpre/testseed
- Reality API helpers (random target, x25519/mldsa65 generate-import)
- Link import (vmess:// vless:// etc → outbound)
- FinalMaskForm hookup (deferred from inbound rewrite too)
* test(frontend): convert legacy-class parity tests to snapshot baselines
With the inbound/outbound modal rewrites complete, the cross-check
against the legacy Inbound class has served its purpose. The new
pure-function / Zod-schema paths are the source of truth for production
code; the parity assertions were the migration safety net.
Convert the three parity test files to snapshot-based regression tests:
- headers.test.ts: toHeaders + toV2Headers run against snapshots
captured at the close of the migration (when both new and legacy
were verified byte-equal).
- protocol-capabilities.test.ts: 140 cases (10 fixtures × 14 stream
shapes) snapshot the predicate-result tuple. Was: parity vs legacy
Inbound.canEnableX() class methods.
- inbound-link.test.ts: per-protocol genXxxLink + genInboundLinks
orchestrator output is snapshotted. Was: byte-equality vs legacy
Inbound.genXxxLink() methods.
Also delete shadow.test.ts — its purpose was a dual-parse drift
detector (Inbound.Settings.fromJson vs InboundSettingsSchema.parse).
inbound-full.test.ts already snapshots the Zod parse output, which
covers the same ground without the legacy dependency.
models/inbound.ts and models/outbound.ts stay in the tree for now —
DBInbound still consumes Inbound via its toInbound() method, and
DBInbound migration is out of scope per the migration spec
('Do NOT migrate Status, DBInbound, or AllSetting...'). No
production page imports from @/models/inbound or @/models/outbound
directly anymore.
* chore(frontend): enforce no-explicit-any: error + add typecheck/test to CI
Step 7 of the Zod migration: lock the migration's gains in place via
lint + CI enforcement.
- eslint.config.js: `@typescript-eslint/no-explicit-any` set to error.
Verified locally — zero violations in src/, with the only file-level
disables being src/models/inbound.ts and src/models/outbound.ts
(kept for DBInbound's toInbound() consumer; their migration is out
of spec scope).
- .github/workflows/ci.yml: add Typecheck and Test steps to the
frontend job, between Lint and Build. PRs now have to pass
tsc --noEmit and the full vitest suite (285 tests + 172 snapshots)
before build runs.
Migration scoreboard (vs the spec):
Step 1 primitives + barrels done
Step 2 protocol leaf + DUs done
Step 3 pure-fn extraction done
Step 4 form modals -> Pattern A done (Inbound + Outbound)
Step 5 delete models/ files DEFERRED (DBInbound still uses
Inbound; spec marks DBInbound
migration out of scope)
Step 6 tighten .loose() / unknown DEFERRED (invasive, separate PR)
Step 7 lint + CI enforcement done (this commit)
Production code paths now have no direct dependency on the legacy
Inbound or Outbound classes.
* feat(frontend): OutboundFormModal deferred features (Vision seed / TCP host+path / WG pubKey derive)
Three small wins from the post-atomic-swap deferred list:
- VLESS Vision testpre + testseed: shown only when flow ===
'xtls-rprx-vision' (mirrors the legacy canEnableVisionSeed gate).
testseed binds to a Select mode='tags' with a normalize() that
coerces strings to positive integers and drops invalid entries.
- TCP HTTP camouflage host + path: when the TCP HTTP camouflage
Switch is on, surface two inputs that read/write directly into
streamSettings.tcpSettings.header.request.headers.Host and .path.
Both fields are string[] on the wire; normalize + getValueProps
translate to/from comma-joined strings in the UI (one entry per
host or path the user wants camouflaged).
- Wireguard pubKey auto-derive: Form.useWatch on settings.secretKey
+ useEffect that runs Wireguard.generateKeypair(secret).publicKey
on every change and writes the result into the disabled pubKey
display field. Matches the legacy modal's per-keystroke derive.
* feat(frontend): symmetric TCP HTTP host/path + extra sockopt knobs
OutboundFormModal:
- Sockopt section gains 5 common-but-rarely-tweaked knobs:
acceptProxyProtocol, tproxy (off/redirect/tproxy), tcpcongestion
(bbr/cubic/reno), V6Only, tcpUserTimeout. The remaining sockopt
fields (tcpKeepAliveIdle, tcpMaxSeg, tcpWindowClamp,
trustedXForwardedFor) are still edit-via-JSON; they are deeply
tunable and not commonly touched.
InboundFormModal:
- TCP HTTP camouflage gains host + path inputs symmetric to the
outbound side. Switch ON seeds request with sensible defaults
(version 1.1, method GET, path ['/'], empty headers). The two
inputs use the same normalize/getValueProps comma-string ↔
string[] dance the outbound side uses, so the wire shape stays
identical to what xray-core expects.
* feat(frontend): HeaderMapEditor reusable component + wire WS/HTTPUpgrade headers
Add a single reusable header-map editor that handles the two wire
shapes Xray uses:
- v1: { name: 'value' } — used by WS / HTTPUpgrade / Hysteria
masquerade. One value per name.
- v2: { name: ['value1', 'value2'] } — used by TCP HTTP camouflage.
Each header can repeat (RFC 7230 §3.2.2).
Internal state is always a flat list of {name, value} rows regardless
of mode; conversion to/from the wire shape happens at the value /
onChange boundary so consumers bind straight to a Form.Item with no
extra transforms.
Wired into:
- InboundFormModal: WS Headers, HTTPUpgrade Headers
- OutboundFormModal: WS Headers, HTTPUpgrade Headers
XHTTP headers are already in a list-of-rows wire shape (different
from these two), so they keep their bespoke editor. Hysteria
masquerade is still deferred until the Hysteria stream sub-form
lands.
* feat(frontend): Hysteria stream sub-form (schema branch + outbound UI)
Add the 7th branch to NetworkSettingsSchema for Hysteria transport.
schemas/protocols/stream/hysteria.ts:
- HysteriaStreamSettingsSchema covers the full wire shape: version=2,
auth, congestion (''|'brutal'), up/down bandwidth strings, optional
udphop sub-object for port-hopping, receive-window tuning fields,
maxIdleTimeout, keepAlivePeriod, disablePathMTUDiscovery.
schemas/protocols/stream/index.ts:
- NetworkSchema gains 'hysteria'.
- NetworkSettingsSchema gains the 7th branch
{ network: 'hysteria', hysteriaSettings: HysteriaStreamSettingsSchema }.
OutboundFormModal.tsx:
- NETWORK_OPTIONS keeps the 6 standard transports for non-hysteria
protocols; when protocol === 'hysteria', a 7th option is appended
(matches the legacy [...NETWORKS, 'hysteria'] gate).
- newStreamSlice handles the 'hysteria' case with sensible defaults
matching the legacy HysteriaStreamSettings constructor.
- New sub-form when network === 'hysteria': 8 common fields (auth,
congestion, up, down, udphop Switch + 3 nested fields when on,
maxIdleTimeout, keepAlivePeriod, disablePathMTUDiscovery).
- Receive-window tuning fields are still edit-via-JSON (rarely
touched + would clutter the form).
* feat(frontend): fallbacks polish — move up/down + Add all button
Two small UX wins on the InboundFormModal Fallbacks card:
- Per-row Move up / Move down buttons (ArrowUp/Down icons) that swap
adjacent indices. Order survives reloads via sortOrder (rebuilt from
index on save). First row's Up button + last row's Down button are
disabled.
- 'Add all' button next to 'Add fallback' that one-shot inserts a
fresh row for every eligible inbound (every option in
fallbackChildOptions) not already wired up. Disabled when every
eligible inbound is already covered. Convenient for operators
running catch-all routing across every host on the panel.
* feat(frontend): XHTTP advanced fields on outbound modal
Replace the 'edit via JSON' deferred-features hint with the full XHTTP
sub-form matching the legacy modal's XhttpFields helper.
schemas/protocols/stream/xhttp.ts:
- New XHttpXmuxSchema: 6 connection-multiplexing knobs
(maxConcurrency, maxConnections, cMaxReuseTimes, hMaxRequestTimes,
hMaxReusableSecs, hKeepAlivePeriod).
- XHttpStreamSettingsSchema gains 5 outbound-only fields and one
UI-only toggle: scMinPostsIntervalMs, uplinkChunkSize, noGRPCHeader,
xmux, enableXmux.
outbound-form-adapter.ts:
- New stripUiOnlyStreamFields() drops xhttpSettings.enableXmux on the
way to wire so the panel never embeds the UI toggle into the saved
config. xray-core ignores unknown fields anyway, but the panel reads
back its own emitted JSON, so a clean wire shape matters.
OutboundFormModal.tsx:
- Headers editor (HeaderMapEditor v1) for xhttpSettings.headers.
- Padding obfs Switch + 4 conditional fields (key/header/placement/
method) when on.
- Uplink HTTP method Select with GET disabled outside packet-up.
- Session placement + session key (key shown when placement != path).
- Sequence placement + sequence key (same pattern).
- packet-up mode: scMinPostsIntervalMs, scMaxEachPostBytes, uplink
data placement + key + chunk size (key/chunk-size shown when
placement != body).
- stream-up / stream-one mode: noGRPCHeader Switch.
- XMUX Switch + 6 nested fields when on.
* feat(frontend): inbound TCP HTTP camouflage response fields + request headers
Complete the TCP HTTP camouflage UI on the inbound side.
Already there from the previous symmetric host/path commit:
- Request host (string[] via comma-string)
- Request path (string[] via comma-string)
This commit adds:
- Request headers (V2 map: name -> string[]) via HeaderMapEditor.
- Response version (defaults to '1.1' when camouflage toggles on).
- Response status (defaults to '200').
- Response reason (defaults to 'OK').
- Response headers (V2 map) via HeaderMapEditor.
The HTTP camouflage Switch seeds both request and response sub-objects
on toggle-on so xray-core sees a valid TcpHeader.http shape from the
first save. Without the response seed, partial fills would emit a
schema-incomplete response block that xray-core might reject.
* feat(frontend): link import on outbound modal (vmess/vless/trojan/ss/hy2)
The legacy outbound modal could import a vmess://, vless://, trojan://,
ss://, or hysteria2:// share link via a Convert button on the JSON
tab. Restore that UX with a focused pure-function parser.
lib/xray/outbound-link-parser.ts:
- parseVmessLink: base64 JSON, maps net/tls + per-network params onto
the discriminated stream branch.
- parseVlessLink: standard URL with type/security/sni/pbk/sid/fp/flow
query params, dispatches transport via buildStream + applies
security params via applySecurityParams.
- parseTrojanLink: same URL pattern, defaults security to tls.
- parseShadowsocksLink: both modern (base64 userinfo@host:port) and
legacy (base64 of whole thing) ss:// formats.
- parseHysteria2Link: accepts both hysteria2:// and hy2:// schemes,
uses the hysteria stream branch with version=2 + TLS h3.
- parseOutboundLink dispatcher returns the first non-null parser
result, or null when no scheme matches.
test/outbound-link-parser.test.ts:
- 13 cases covering happy paths for each protocol family plus malformed
input, ss:// dual-format handling, hy2:// alias.
OutboundFormModal.tsx:
- Import button on the JSON tab Input.Search; on success, parsed
payload flows through rawOutboundToFormValues, the form is reset,
and we switch back to the Basic tab.
- Tag is preserved when the parsed link does not carry one.
Out of scope: advanced fields the legacy parser handled (xmux, padding
obfs, reality short IDs, finalmask from fm= param). Power users can
finish the import in the form after the basics land.
* feat(frontend): inbound Hysteria stream sub-form (auth + udpIdleTimeout + masquerade)
Restore the inbound side of Hysteria stream configuration that was
previously hidden — the legacy modal exposed these knobs but the
Pattern A rewrite gated them out.
schemas/protocols/stream/hysteria.ts:
- HysteriaMasqueradeSchema covers the inbound-only masquerade wire
shape: type ('proxy'|'file'|'string'), dir, url, rewriteHost,
insecure, content, headers, statusCode. The three masquerade types
cover the spectrum: reverse-proxy upstream, serve static files, or
return a fixed string body.
- HysteriaStreamSettingsSchema gains 3 inbound-side optional fields:
protocol, udpIdleTimeout, masquerade. Outbound side is untouched
(the legacy class accepted both wire shapes via the same struct).
InboundFormModal.tsx:
- New hysteria stream sub-form section in streamTab, gated by
protocol === HYSTERIA. Fields: version (disabled, locked to 2),
auth, udpIdleTimeout, masquerade Switch + nested type-Select with
three conditional sub-blocks (proxy URL+rewriteHost+insecure,
file dir, string statusCode+body+headers).
- onValuesChange cascade: switching TO hysteria seeds streamSettings
with the hysteria branch (forcing network='hysteria' + TLS); switching
AWAY from hysteria snaps back to TCP so the standard network
selector has a valid starting point.
masquerade headers use the HeaderMapEditor v1 component.
* feat(frontend): complete outbound sockopt section with remaining knobs
Add the four remaining SockoptStreamSettings fields that were
edit-via-JSON-only after the initial outbound modal rewrite:
- TCP keep-alive idle (s) — tcpKeepAliveIdle, time before sending
the first probe on an idle TCP connection.
- TCP max segment — tcpMaxSeg, override the default MSS.
- TCP window clamp — tcpWindowClamp, cap the TCP receive window.
- Trusted X-Forwarded-For — trustedXForwardedFor, list of trusted
proxy hostnames/CIDRs whose XFF headers Xray will honor.
The outbound sockopt section now exposes all 17 SockoptStreamSettings
fields from the schema. The InboundFormModal's sockopt section has
its own field list (closer to the legacy class) and is unchanged.
* feat(frontend): outbound TCP HTTP camouflage parity with inbound
Add method/version inputs, request header map, and full response
sub-section (version/status/reason/headers) to OutboundFormModal so the
outbound side can configure the same HTTP-1.1 obfuscation knobs the
inbound side already exposed.
* feat(frontend): round-trip XHTTP advanced fields in outbound link parser
Pick up xPaddingBytes, scMaxEachPostBytes, scMinPostsIntervalMs,
uplinkChunkSize, and noGRPCHeader from both vmess:// JSON and the URL
query-param parsers (vless/trojan). The advanced xmux/padding-obfs/
reality-shortId knobs still wait on a follow-up; this slice unblocks
the common case where a phone-issued xhttp link carries non-default
padding or post sizes.
* feat(frontend): round-trip XHTTP padding-obfs + remaining advanced knobs
Extract the XHTTP key-mapping into typed string/number/bool key arrays
applied by both the URL query-param branch and the vmess JSON branch.
The parser now covers xPaddingObfsMode + xPaddingKey/Header/Placement/
Method, sessionKey/seqKey/uplinkData{Placement,Key}, noSSEHeader,
scMaxBufferedPosts, scStreamUpServerSecs, serverMaxHeaderBytes, and
uplinkHTTPMethod alongside the previous five XHTTP fields. Two new
round-trip tests cover the padding-obfs surface on both link forms.
* feat(frontend): FinalMaskForm rewrite to Pattern A + wire into both modals
Rewrite FinalMaskForm.tsx from a class-coupled component (mutated
stream.finalmask.tcp[] via .addTcpMask/.delTcpMask methods, notified
parent via onChange callback) into a Pattern A sub-form: takes a
NamePath base, a FormInstance, and the surrounding network/protocol,
then composes Form.List + Form.Item at absolute paths under that base.
All array structures use nested Form.List — tcp/udp mask arrays, the
clients/servers groups in header-custom (Form.List of Form.List of
ItemEditor), and the noise list. Type Selects use onChange to reset
the settings sub-object via form.setFieldValue, mirroring the legacy
changeMaskType behavior. The kcp.mtu side effect on xdns type change
is preserved.
Wired into both InboundFormModal and OutboundFormModal stream tabs,
placed after the sockopt section. The component is the first Pattern A
consumer of nested Form.List inside another Form.List, so it stands
as the reference for future nested-array sub-forms.
* docs(frontend): record FinalMaskForm rewrite + hookup in status doc
Mainline migration goal — replace class-based xray models with Zod
schemas as the single source of truth + drive all forms through
AntD `Form.useForm` + `antdRule(schema.shape.X)` — is complete.
Remaining items are incremental polish.
* fix(frontend): Phase 2 Inbound form reactivity bugs (B1-B9, consolidated)
A run of resets dropped the per-bug commits 1401d833 / 5b1ae450 /
5bce0dc5 / 4007eec7. Re-landing all fixes against the same files in one
commit to avoid another rebase-style drop.
B1 — Transmission Select / External Proxy + Sockopt switches didn't
react after click. AntD 6.4.3 Form.useWatch on nested paths doesn't
re-fire reliably after `setFieldValue('streamSettings', cleaned)` on
the parent. Bound Transmission via `name={['streamSettings', 'network']}`
and wrapped the two switches in `<Form.Item shouldUpdate>` blocks that
read state via getFieldValue.
B2 — Security regressed from `Radio.Group buttonStyle="solid"` to a
Select dropdown, and disable state didn't refresh because tlsAllowed/
realityAllowed were derived at the top of the component. Restored
Radio.Button group and moved canEnableTls/canEnableReality evaluation
inside the shouldUpdate render prop.
B3 — Advanced tab "All" sub-tab was missing. Added it as the first
item with a new AdvancedAllEditor that round-trips top-level fields +
the three nested slices on edit.
B4 — Advanced tab title/subtitle and per-section help text were gone.
Wrapped the Tabs in the existing `.advanced-shell` / `.advanced-panel`
structure and restored the `.advanced-editor-meta` help under each
sub-tab using existing i18n keys.
B5 — TLS / Reality sub-forms didn't render when selecting tls or
reality on the Security tab. The `{security === 'tls' && ...}` and
`{security === 'reality' && ...}` conditionals used a stale top-level
useWatch value. Wrapped both in <Form.Item shouldUpdate> blocks that
read `security` via getFieldValue.
B6 — Advanced JSON editors stale after Stream/Sniffing changes. The
editors seeded text via lazy useState and AntD Tabs renders all panes
upfront, so the Advanced tab was already mounted with stale data.
Both AdvancedSliceEditor and AdvancedAllEditor now subscribe via
Form.useWatch and re-sync the text buffer when the watched JSON
differs from a lastEmitRef (the serialization at the moment of our
own last accepted write). User typing doesn't trigger re-sync because
setFieldValue updates lastEmitRef too. (A prior attempt added
`destroyOnHidden` to the outer Tabs but broke conditional tab items
when the unmounted Form.Item for `protocol` lost its value —
abandoned in favor of useWatch reactivity.)
B7 — HeaderMapEditor + button did nothing. addRow() appended a blank
{name:'', value:''} row, but commit() filtered it via rowsToMap before
reaching the form, so AntD saw no change and didn't re-render. The
editor now keeps a local rows state so blank rows survive during
editing; only filled rows are emitted to onChange.
B9 — Sniffing destOverride defaults (HTTP/TLS/QUIC/FAKEDNS) were not
pre-checked on a fresh Add Inbound. buildAddModeValues() seeded
sniffing: {} which left destOverride undefined. Now seeds with
SniffingSchema.parse({}) so the Zod defaults populate.
* fix(frontend): FinalMaskForm TCP Mask sub-forms + Advanced JSON wrap (B10/B11)
B10 — FinalMaskForm TCP Mask: after adding a mask and picking a Type
(Fragment/Header Custom/Sudoku), the type-specific sub-forms didn't
render. TcpMaskItem read `type` via Form.useWatch on a path inside
Form.List, which doesn't re-fire reliably in AntD 6.4.3 — same root
cause as the earlier B1/B2/B5 reactivity issues. Replaced with a
<Form.Item shouldUpdate> wrapper that reads `type` via getFieldValue
inside the render prop.
B11 — Advanced sub-tabs (settings / streamSettings / sniffing) showed
just the inner value (e.g. `{clients:[],decryption:"none",...}`), but
the legacy modal wrapped each slice with its key envelope (e.g.
`{settings:{...}}`) so the JSON matches the wire shape's slice and
round-trips cleanly from copy-pasted inbound configs. Added a
`wrapKey` prop to AdvancedSliceEditor that wraps/unwraps the value
on render/write; the three sub-tabs now pass settings / streamSettings
/ sniffing as their wrapKey.
* fix(frontend): import InboundFormModal.css so layout classes apply (B12)
The file InboundFormModal.css existed but was never imported, so every
class in it had no effect — including:
- .vless-auth-state — the "Selected: <auth>" caption next to the X25519/
ML-KEM/Clear button row stayed inline next to Clear instead of
display:block beneath the row
- .advanced-shell / .advanced-panel — the Advanced tab's header / panel
framing was missing
- .advanced-editor-meta — the per-section help text under each Advanced
sub-tab had no spacing
- .wg-peer — wireguard peer rows had no top margin
Add a side-effect import of the CSS file at the top of the modal. No
other change needed; the legacy modal must have either imported it or
had a global import that the new modal didn't inherit.
* fix(frontend): FinalMaskForm relative paths + network-switch defaults (B13/B14)
B13 — FinalMaskForm used absolute paths like
['streamSettings', 'finalmask', 'tcp', 0, 'type'] for Form.Item names
inside Form.List render props. AntD's Form.List prefixes Form.Item
names with the list's own name, so the actual storage path became
['streamSettings', 'finalmask', 'tcp', 'streamSettings', 'finalmask',
'tcp', 0, 'type'] — total nonsense. Symptoms: Type Select didn't show
the 'fragment' default after add(), and the sub-form for the picked
type never rendered (Fragment/Sudoku/HeaderCustom).
Rewrote FinalMaskForm to use RELATIVE names inside every Form.List
context (TCP/UDP outer list + nested clients/servers/noise inner
lists). Added a `listPath` prop on the items so the shouldUpdate
guard and the side-effect setFieldValue calls (resetting `settings`
when type changes) can still address the absolute path; the
displayed Form.Items use the relative form (`[fieldName, 'type']`).
Replaced top-level Form.useWatch on nested paths with
<Form.Item shouldUpdate> blocks reading via getFieldValue, same
pattern as the earlier B5 fix — Form.useWatch on paths inside
Form.List doesn't re-fire reliably in AntD 6.4.3.
B14 — Switching network (KCP, WS, gRPC, XHTTP, ...) seeded the
new XSettings blob as `{}` so every field showed as empty. The
legacy `newStreamSlice` populated mtu=1350, tti=20, etc. Restored
those defaults in onNetworkChange and seeded the initial
tcpSettings.header in buildAddModeValues so even the default TCP
state shows the HTTP-camouflage Switch in the correct off state
instead of an undefined header object.
* fix(frontend): inbound TCP HTTP camouflage drops request fields + KCP UI field rename (B15/B16)
B15 — Inbound TCP HTTP camouflage exposed Host / Path / Method / Version
/ request-headers inputs. Per Xray docs
(https://xtls.github.io/config/transports/raw.html#httpheaderobject),
the `request` object is honored only by outbound proxies; the inbound
listener reads `response`. Those inputs were writing dead data the
server ignored. Removed them from the inbound modal; only Response
{version, status, reason, headers} remain. The toggle still seeds an
empty request object so the wire shape stays valid against the schema.
B16 — KCP Uplink / Downlink inputs bound to non-existent form fields
`upCap` / `downCap`, while the schema (and wire) use `uplinkCapacity` /
`downlinkCapacity`. Renamed the Form.Items to the schema names so
defaults populate and saves persist. Also corrected newStreamSlice('kcp')
to seed the four KCP defaults (uplinkCapacity / downlinkCapacity /
cwndMultiplier / maxSendingWindow) — the missing two were why
"CWND Multiplier" and "Max Sending Window" still showed empty after
switching to KCP.
* fix(frontend): seed full Zod-schema defaults for stream slices + QUIC params (B17)
XHTTP showed blank Selects for Session Placement / Sequence Placement /
Padding Method / Uplink HTTP Method (and several other knobs). Those
fields have a literal "" (empty string) value in the schema, which the
Select renders as "Default (path)" / "Default (repeat-x)" / etc.
The form field was `undefined`, not `""`, so the Select showed blank
instead of the labelled default option.
newStreamSlice in InboundFormModal hand-rolled per-network seed
objects with only a handful of fields. Replaced with
{Tcp,Kcp,Ws,Grpc,HttpUpgrade,XHttp}StreamSettingsSchema.parse({}) so
every default declared in the schema populates the form on network
switch. Same change in buildAddModeValues for the initial TCP state.
QUIC Params (FinalMaskForm) had the same shape on a smaller scale —
defaultQuicParams() only seeded congestion + debug + udpHop. The
schema's other fields are .optional() (no Zod default) so a schema
parse won't help. Hard-coded the xray-core / hysteria recommended
values (maxIdleTimeout 30, keepAlivePeriod 10, brutalUp/Down 0,
maxIncomingStreams 1024, four window sizes) so the InputNumber
controls render with usable starting values instead of blank.
* fix(frontend): forceRender all tabs so fields register at modal open (B18)
AntD Tabs with the `items` API lazy-mounts inactive tab panes by
default. The Form.Items inside an unvisited tab never register, so:
- Form.useWatch on a parent path (e.g. 'sniffing') returns a partial
view containing only registered children. Until the user clicked the
Sniffing tab, Advanced > Sniffing JSON showed `{sniffing: {}}`
instead of the full default object set by setFieldsValue.
- After visiting the Sniffing tab once, the `sniffing.enabled` Form.Item
registered, so useWatch suddenly returned `{enabled: false}` — still
partial, because the rest of the sniffing children only register when
their Form.Items mount in conditional sub-sections.
Setting `forceRender: true` on every tab item forces all tab panes to
mount at modal open. Every Form.Item registers immediately; the watch
result reflects the full form value seeded by buildAddModeValues. This
also likely resolves the earlier "Invalid discriminator value" error
on submit, which surfaced when streamSettings had an unregistered
security field whose Form.Item hadn't mounted yet.
* refactor(frontend): align hysteria with new docs + drop hysteria2 protocol
Phase 2 smoke fixes on the Inbound add flow surfaced that hysteria2 was
modeled as a separate top-level protocol when it's really just hysteria
v2. The xray transports/hysteria.html docs also pin the hysteria stream
to a minimal shape (version/auth/udpIdleTimeout/masquerade) — the
previous schema carried legacy congestion/up/down/udphop/window knobs
that aren't part of the wire contract.
Hysteria2 removal:
- Drop 'hysteria2' from ProtocolSchema enum and Protocols const
- Drop hysteria2 branches from inbound/outbound discriminated unions
- Drop createDefaultHysteria2InboundSettings / OutboundSettings
- Delete schemas/protocols/inbound/hysteria2.ts and outbound/hysteria2.ts
- Drop hysteria2 case in getInboundClients / genLink (fell through to
the hysteria handler anyway)
- Update client form modals' MULTI_CLIENT_PROTOCOLS sets
- Remove hysteria2-basic fixture + snapshot entries (14 capability
cases, 1 protocols fixture, 1 inbound-defaults factory)
- Keep parseHysteria2Link() outbound parser since hysteria2:// is the
share-link URI prefix for hysteria v2
Hysteria stream alignment with xtls docs:
- HysteriaStreamSettingsSchema reduced to version/auth/udpIdleTimeout/
masquerade per transports/hysteria.html
- Masquerade type adds '' (default 404 page) and defaults to it
- Outbound form drops Congestion/Upload/Download/UDP hop/Max idle/
Keep alive/Disable Path MTU controls and the receive-window note
- newStreamSlice('hysteria') in OutboundFormModal mirrors the trimmed
shape; outbound-link-parser emits the trimmed shape too
- InboundFormModal Masquerade Select gains the default option
New TUN inbound schema:
- Add schemas/protocols/inbound/tun.ts with name/mtu/gateway/dns/
userLevel/autoSystemRoutingTable/autoOutboundsInterface
- Wire into ProtocolSchema enum, InboundSettingsSchema discriminated
union, createDefaultInboundSettings dispatcher
Other Phase 2 smoke fixes folded in:
- Tunnel portMap UI swaps Form.List for HeaderMapEditor v1 — wire
shape is Record<string,string> and the List was producing arrays
- Hysteria onValuesChange seeds full TLS schema defaults + one
empty certificate row (Cipher Suites/Min/Max Version/uTLS/ALPN
were undefined before)
- HTTP/Mixed accounts Add button auto-fills user/pass with
RandomUtil.randomLowerAndNum
- Hysteria security tab gates the 'none' radio out — TLS only
- Hysteria stream tab drops the inbound Auth password field (xray
inbound auth is per-user via 'users', not stream-level)
- Reality onSecurityChange auto-randomizes target/serverNames/
shortIds and fetches an X25519 keypair
- Tag and DB-side fields (up/down/total/expiryTime/
lastTrafficResetTime/clientStats/security) gain hidden Form.Items
so validateFields keeps them in the wire payload (rc-component
form strips unregistered fields)
- WireGuard inbound auto-seeds one peer with generated keypair,
allowedIPs ['10.0.0.2/32'], keepAlive 0 — matches legacy
- WireGuard peer rows separated by Divider with the Peer N title
and a small inline remove button (titlePlacement="center")
* refactor(frontend): retire class-based xray models (Step 5)
Delete models/inbound.ts (3,359 lines) and outbound.ts (2,405).
The Inbound/Outbound classes and ~50 sub-classes are replaced by
Zod-typed data + pure functions in lib/xray/*.
Consumer migration off dbInbound.toInbound():
- useInbounds: isSSMultiUser({protocol, settings}) directly
- QrCodeModal: genWireguardConfigs/Links/AllLinks from lib/xray
- InboundList: derives tags from streamSettings raw fields
- InboundsPage: clone via raw JSON, fallback projection via
schema-shape stream object, exports via genInboundLinks
- InboundInfoModal: builds an InboundInfo facade locally from
raw streamSettings (host/path/serverName/serviceName per
network), canEnableTlsFlow + isSS2022 from lib/xray
New helper: lib/xray/inbound-from-db.ts exposes
inboundFromDb(raw) converting a raw DBInbound row into a
schema-typed Inbound for the link-generation orchestrators.
DBInbound trimmed: drops toInbound, isMultiUser, hasLink,
genInboundLinks, _cachedInbound. Imports Protocols from
@/schemas/primitives now that ./inbound is gone.
Bundled Phase 2 fixes:
- Outbound modal: Form.useWatch with preserve: true so the
stream block doesn't gate itself out when network is unmounted
- Inbound form adapter: pruneEmpty preserves empty objects;
per-protocol client field projection via Zod safeParse;
sniffing collapse to {enabled:false}
- useClients invalidateAll also invalidates inbounds.root()
- IndexPage Config modal top/maxHeight polish
Tests: 283/283 pass. typecheck/lint clean.
* fix(frontend): inboundFromDb fills Zod defaults for stream + settings
Smoke-testing the new inboundFromDb helper surfaced two regressions
that the strict lib/xray link generators expose when fed raw DB
streamSettings without per-network sub-keys.
1. genVlessLink / genTrojanLink crash on `stream.tcpSettings.header`
when streamSettings lacks `tcpSettings` (true for slim list rows
and for handcrafted minimal-JSON inbounds). The legacy
Inbound.fromJson chain populated TcpStreamSettings via its own
constructor; the new helper now does the same by parsing the raw
<network>Settings sub-object through the matching Zod schema and
merging schema defaults onto whatever the DB stored.
2. genVlessLink writes `encryption=undefined` into the share URL
when settings lacks the `encryption: 'none'` literal that vless
wire JSON normally carries. Fixed by running raw settings through
InboundSettingsSchema.safeParse() to populate per-protocol
defaults (encryption, decryption, fallbacks, etc.) the same way
the legacy class fromJson chain did.
Same pattern applied to security branch (tls/realitySettings).
Tests: src/test/inbound-from-db.test.ts covers
- JSON-string / object / empty settings coercion
- genInboundLinks vless (TCP/none, with encryption=none)
- genWireguardConfigs + genWireguardLinks peer fanout
- genAllLinks trojan with TLS sub-defaults applied
- protocol-capability helpers with raw shapes
- getInboundClients across vless/SS-single/non-client protocols
296/296 pass.
* fix(frontend): QUIC udpHop.interval is a range string, not a number (B19)
User report: "streamSettings.finalmask.quicParams.udpHop.interval:
Invalid input: expected string, received number".
Three-part fix:
- FinalMaskForm: Hop Interval input changed from InputNumber to
Input with "e.g. 5-10" placeholder. xray-core spec says interval
is a range string like '5-10' (seconds between min-max hops),
not a single number.
- FinalMaskForm: defaultQuicParams() seeds interval: '5-10' instead
of the broken `interval: 5`.
- QuicUdpHopSchema: preprocess coerces number → string for legacy
DB rows that were written by the now-fixed buggy UI. Stops the
load-time validation crash on existing inbounds.
Tests still 296/296.
* fix(frontend): outbound link parser handles extra/fm/x_padding_bytes (B20)
User-reported vless share link with full xhttp + reality + finalmask
config failed to round-trip on outbound import. The inbound link
generator emits three payloads the outbound parser was ignoring:
1. `extra=<json>` — bundles advanced xhttp knobs (xPaddingBytes,
scMaxEachPostBytes, scMinPostsIntervalMs, padding-obfs keys,
etc.). applyXhttpStringFromParams now JSON.parses this and
merges the fields into xhttpSettings via the same JSON-branch
logic used by vmess.
2. `x_padding_bytes=<range>` — snake_case alias the inbound emits
alongside the camelCase form. Now applied before camelCase so
explicit `xPaddingBytes` URL params still win.
3. `fm=<json>` — full finalmask object including quicParams.udpHop
and tcp/udp mask arrays. New applyFinalMaskParam attaches the
decoded object to streamSettings.finalmask. Wired into both
parseVlessLink and parseTrojanLink.
Tests:
- Real B20 link parses with xhttp + reality + finalmask all populated
- Precedence: camelCase URL > extra JSON > snake_case alias > default
- Malformed extra JSON falls through without crashing the parser
300/300 pass.
* fix(frontend): Outbound submit crash on non-mux protocols + tab a11y (B21)
Two issues surfaced on Outbound save:
1. Crash: `Cannot read properties of undefined (reading 'enabled')` at
formValuesToWirePayload. The modal hides the Mux switch entirely
for non-stream protocols (dns/freedom/blackhole/loopback) and for
stream protocols when isMuxAllowed gates it out (xhttp, vless+flow).
With the field never registered, validateFields() returns no `mux`
key — `values.mux.enabled` then dereferences undefined.
Fix: optional chain `values.mux?.enabled` so missing mux skips the
mux clause silently. Documented why mux can be absent.
2. Chrome a11y warning: "Blocked aria-hidden on an element because its
descendant retained focus" — when the user has an input focused
inside one Tab panel and switches to another tab, AntD marks the
outgoing panel aria-hidden while focus is still inside. The browser
warns, but the focused control is now invisible to AT users.
Fix: blur the active element before setActiveKey in onTabChange.
* fix(frontend): blur active element on every tab switch path (B21 follow-up)
The previous B21 patch only blurred on user-initiated tab clicks via
onTabChange. Two other paths still set activeKey while a JSON-tab
input retained focus:
- importLink: after a successful share-link parse, setActiveKey('1')
switched to the form tab while the user's focus was still on the
Input.Search they just pressed Enter in. Chrome logged the same
"Blocked aria-hidden" warning because the panel they were leaving
became aria-hidden synchronously, with their input still focused.
- onTabChange entering the JSON tab: also did a bare setActiveKey
with no blur, so going from a focused form input INTO the JSON
tab could trip the warning in reverse.
Fix: centralized switchTab(key) that blurs document.activeElement
sync before calling setActiveKey. Every internal tab transition
(importLink, onTabChange both directions) now routes through it.
The single setActiveKey('1') in the open-modal useEffect is left as
a plain setter because there's no focused input at modal-open time.
* refactor(frontend): extract fillStreamDefaults to shared helper
Move the network/security schema-default filler out of inbound-from-db.ts
into stream-defaults.ts so other consumers can reuse it without dragging
in the DBInbound-specific code path.
* fix(frontend): derive QUIC/UDP-hop switch state from data presence (B22)
The QUIC Params and UDP Hop toggles previously persisted as separate
boolean flags (enableQuicParams / hasUdpHop) which weren't part of the
xray wire format and weren't restored when a config was pasted into the
modal. Use data presence as the single source of truth: the switch is
on iff the corresponding sub-object exists. Switching off clears it
back to undefined.
* fix(frontend): xhttp form binding + drop empty strings from JSON (B23)
uplinkHTTPMethod was wrapped Form.Item -> Form.Item(shouldUpdate) ->
Select, which broke AntD's value/onChange injection (AntD only clones
the immediate child). Restructured so shouldUpdate is the outer wrapper
and Form.Item(name) directly wraps the Select.
Also drop empty-string fields from xhttpSettings in the wire payload —
fields like uplinkHTTPMethod, sessionPlacement, seqPlacement,
xPaddingKey default to '' meaning "use server default", so they
shouldn't appear in JSON as "field": "".
Adds placeholder text to the 3 xhttp Selects so the form reflects the
current value after JSON paste.
* feat(frontend): align finalmask + sockopt with xray docs, add golden fixtures
Schema fixes per https://xtls.github.io/config/transports/finalmask.html
and https://xtls.github.io/config/transports/sockopt.html:
finalmask:
- QuicCongestionSchema: remove non-doc 'cubic', keep reno/bbr/brutal/force-brutal
- Add BbrProfileSchema (conservative/standard/aggressive) and bbrProfile field
- brutalUp/brutalDown: number -> string per docs (units like '60 mbps')
- Tighten ranges: maxIdleTimeout 4-120, keepAlivePeriod 2-60, maxIncomingStreams min 8
- UdpMaskTypeSchema: add missing 'sudoku'
- udpHop.interval stays as preprocessed string-range per intentional B19 divergence
sockopt:
- tcpFastOpen: boolean -> union(boolean, number) per docs (number tunes queue size)
- mark: drop min(0) (can be any int)
- domainStrategy default: 'UseIP' -> 'AsIs' per docs
- tcpKeepAlive Interval/Idle defaults: 0/300 -> 45/45 per docs (outbound)
- Add AddressPortStrategySchema enum (7 values) + addressPortStrategy field
- Add HappyEyeballsSchema (tryDelayMs/prioritizeIPv6/interleave/maxConcurrentTry)
- Add CustomSockoptSchema (system/type/level/opt/value) + customSockopt array
Bug fixes:
- options.ts: Address_Port_Strategy values were lowercase ('srvportonly');
xray-core requires camelCase ('SrvPortOnly'). Fixed all 6 entries.
- OutboundFormModal: domainStrategy Select was mistakenly populated from
ADDRESS_PORT_STRATEGY_OPTIONS; now uses DOMAIN_STRATEGY_OPTION.
- OutboundFormModal: inline sockopt defaults (hardcoded {acceptProxyProtocol:
false, domainStrategy: 'UseIP', ...}) replaced with
SockoptStreamSettingsSchema.parse({}) so schema is the single source.
Form additions (both InboundFormModal + OutboundFormModal):
- Address+port strategy Select
- Happy Eyeballs Switch + sub-form (tryDelayMs/prioritizeIPv6/interleave/maxConcurrentTry)
- Custom sockopt Form.List (system/type/level/opt/value)
- FinalMaskForm: BBR Profile Select (visible when congestion='bbr'),
Brutal Up/Down placeholders updated to string format
Golden fixtures (8 new + 4 xhttp extras):
- finalmask/{tcp-mask, udp-mask, quic-params, combined}.json — cover all TCP
mask types, 7 UDP mask types including new sudoku, full QUIC params shape
- sockopt/{defaults, tcp-tuning, tproxy, full}.json — full sockopt knobs
- stream/xhttp-{basic, extra-padding, extra-placement, extra-tuning}.json —
cover the extra-blob fields bundled into share-link extra=<json>
Tests now at 312 (up from 300); typecheck/lint clean.
* feat(frontend): migrate DNS + Routing to Zod, align with xray docs
Adds first-class Zod schemas for the xray-core DNS block and routing
sub-objects (Balancer, Rule) matching the documented shape at
https://xtls.github.io/config/dns.html and
https://xtls.github.io/config/routing.html, then wires the
DnsServerModal and BalancerFormModal up to those schemas.
schemas/dns.ts (new):
- DnsQueryStrategySchema enum (UseIP/UseIPv4/UseIPv6/UseSystem)
- DnsHostsSchema record(string -> string | string[])
- DnsServerObjectInnerSchema + DnsServerObjectSchema (with preprocess
to migrate legacy `expectIPs` -> `expectedIPs` alias)
- DnsServerEntrySchema = string | DnsServerObject (xray accepts both)
- DnsObjectSchema with all documented fields and defaults
schemas/routing.ts (new):
- RuleProtocolSchema enum (http/tls/quic/bittorrent)
- RuleWebhookSchema (url/deduplication/headers)
- RuleObjectSchema covering every documented field (domain/ip/port/
sourcePort/localPort/network/sourceIP/localIP/user/vlessRoute/
inboundTag/protocol/attrs/process/outboundTag/balancerTag/ruleTag/
webhook) with type=literal('field').default('field')
- BalancerStrategyTypeSchema enum (random/roundRobin/leastPing/leastLoad)
- BalancerCostObjectSchema {regexp,match,value}
- BalancerStrategySettingsSchema (expected/maxRTT/tolerance/baselines/costs)
- BalancerStrategySchema + BalancerObjectSchema
schemas/xray.ts:
- routing.rules: was loose 3-field object, now z.array(RuleObjectSchema)
- routing.balancers: was z.array(z.unknown()), now z.array(BalancerObjectSchema)
- dns: was 2-field loose, now full DnsObjectSchema
- BalancerFormSchema: strategy now BalancerStrategyTypeSchema (enum)
instead of z.string(); fallbackTag defaults to ''; settings? added
for leastLoad
DnsServerModal (full Pattern A rewrite):
- useState/DnsForm interface -> Form.useForm<DnsServerForm>()
- manual domain/expectedIP/unexpectedIP list -> Form.List
- antdRule on address/port/timeoutMs for inline validation
- preserves legacy collapse-to-bare-string behavior on submit
BalancerFormModal:
- Adds conditional leastLoad sub-form (Expected/MaxRTT/Tolerance/
Baselines/Costs) wired to BalancerStrategySettingsSchema
- Strategy options derived from schema enum
- Cost rows with regexp/literal switch + match + value
- required prop on Tag and Selector for red asterisk visual
BalancersTab:
- BalancerRecord interface -> type alias to BalancerObject
- onConfirm now propagates strategy.settings to wire when leastLoad
- Removes useMemo wrapping `columns` array. The memo had deps
[t, isMobile] (with an eslint-disable) so the column render
functions kept their original closure over `openEdit`. Once a
balancer was created and the user clicked the edit button, the
stale openEdit fired with empty `rows`, so rows[idx] was undefined
and the modal opened blank. Columns are cheap to rebuild each
render, so dropping the memo is the right fix.
DnsTab + RoutingTab: switch ad-hoc interfaces to schema-derived types.
translations (en-US, fa-IR): add the previously-missing
pages.xray.balancerTagRequired and pages.xray.balancerSelectorRequired
keys so antdRule surfaces a real message instead of the raw i18n key.
* test(frontend): golden fixtures for DNS, Balancer, Rule schemas
Adds JSON fixtures under golden/fixtures/{dns,dns-server,balancer,rule}
plus three vitest files that parse them through the new schemas and
snapshot the result.
dns/: minimal (servers as strings) + full (every top-level field plus
hosts with geosite/domain/full prefixes and 5 mixed string/object
servers covering fakedns, localhost, https://, tcp://, quic+local://).
dns-server/: full (every DnsServerObject field) + legacy-expectips
(asserts the z.preprocess that migrates the legacy `expectIPs` key
into the canonical `expectedIPs`).
balancer/: random-minimal (default strategy by omission), roundrobin,
leastping, leastload-full (covers all StrategySettings fields and both
regexp=true|false costs).
rule/: minimal, full (exercises every RuleObject field including
localPort, localIP, process aliases like `self/`, all four protocol
enum values, ip negation `!geoip:`, attrs with regexp value, and the
WebhookObject with deduplication+headers), balancer-routed (uses
balancerTag instead of outboundTag), port-number (port as a number to
prove the union(number,string) accepts both).
* fix(frontend): serialize bulk client delete + drop deprecated Alert.message
useClients.removeMany was firing all DELETEs in parallel via Promise.all.
The 3x-ui backend mutates a single config JSON per request (read /
modify / write), so 20 concurrent deletes raced on the same file: every
request reported success, but only the last writer's copy stuck — about
half the selected clients reappeared after the toast. Replace the
parallel fan-out with a sequential for-of loop so each delete sees the
committed state of the previous one. The trade-off is total latency
(20 * ~250ms = ~5s) which is the correct behavior until the backend
grows a proper /bulkDel endpoint.
Also rename the Alert `message` prop to `title` in
ClientBulkAdjustModal to clear the AntD v6 deprecation warning.
* feat(clients): server-side bulk create/delete with per-inbound batching
Replace the panel-side fan-out (Promise.all of single /add and /del
calls) that raced on the shared inbound config and capped throughput at
roughly one round-trip per client. New endpoints batch the work on the
server:
- POST /panel/api/clients/bulkDel { emails, keepTraffic }
- POST /panel/api/clients/bulkCreate [ {client, inboundIds}, ... ]
BulkDelete groups emails by inbound and performs a single
read-modify-write per inbound (one JSON parse, one marshal, one Save)
instead of N. Per-row DB cleanups (ClientInbound, ClientTraffic,
InboundClientIps, ClientRecord) are batched with WHERE...IN queries.
Per-email failures are reported via Skipped[] and processing continues.
BulkCreate iterates payloads sequentially through the same Create path
single-add uses, so heterogeneous batches (different inboundIds, plans)
remain valid in one round-trip.
Frontend bulkDelete/bulkCreate hooks parse the new response shape
({ deleted|created, skipped[] }) and the bulk-add modal now posts a
single request instead of fanning out emails.
* perf(clients): batch BulkAdjust per inbound, skip no-op xray calls on local
Same per-inbound batching strategy as BulkDelete. The previous code
called Update once per email, which itself looped through each inbound
the client belonged to — reparsing the same settings JSON, calling
RemoveUser+AddUser on xray, and running SyncInbound for every single
email. For 200 emails in one inbound that's 200 JSON read/write cycles
and 400 xray runtime calls.
The new BulkAdjust groups emails by inbound and per inbound:
- locks once, reads settings JSON once
- mutates expiryTime/totalGB in place for every target client
- writes the inbound and runs SyncInbound once
ClientTraffic rows are updated with a single per-email query at the end
(values differ per client so they can't be folded into one statement).
For local-node inbounds the xray runtime calls are skipped entirely.
The AddUser payload only contains email/id/security/flow/auth/password/
cipher — none of which change in an adjust — so RemoveUser+AddUser was
a no-op that briefly flapped active users. Limit enforcement is driven
by the panel's traffic loop reading ClientTraffic, not by xray-core.
For remote-node inbounds rt.UpdateUser is preserved so the remote panel
receives the new totals/expiry.
Skip+report semantics match BulkDelete: any per-email error leaves that
email's record/traffic untouched and is returned in Skipped[].
* refactor(backend): retire hysteria2 as a top-level protocol
Hysteria v2 is not a separate xray protocol — it is plain "hysteria"
with streamSettings.version = 2. The frontend already dropped hysteria2
from the protocol enum in 5a90f7e3; the backend was still carrying the
literal as a compat alias.
Removed:
- model.Hysteria2 constant
- model.IsHysteria helper (only callers were buildProxy + genHysteriaLink)
- TestIsHysteria
- "hysteria2" from the Inbound.Protocol validate oneof enum
- All `case model.Hysteria, model.Hysteria2:` and `case "hysteria",
"hysteria2":` branches across client.go, inbound.go, outbound.go,
xray.go, port_conflict.go, xray/api.go, subService.go,
subJsonService.go, subClashService.go
- Stale #4081 comments
Kept (correctly — these are client-side URI/config schemes that are
independent of the xray protocol type):
- hysteria2:// share-link URI in subService.genHysteriaLink
- "hysteria2" Clash proxy type in subClashService.buildHysteriaProxy
- Comments referring to Hysteria v2 as a transport version
Note: this change does not include a DB migration. Existing rows with
protocol = 'hysteria2' will fall through to the default switch arms
after upgrade. A separate `UPDATE inbounds SET protocol = 'hysteria'
WHERE protocol = 'hysteria2'` is required for installs that still hold
legacy data.
* refactor(frontend): retire all AntD + Zod deprecations
Swept the codebase for @deprecated APIs using a one-off
type-aware ESLint config (eslint.deprecated.config.js) and
fixed every hit:
- 78 instances of `<Select.Option>` JSX in InboundFormModal,
LogModal, XrayLogModal converted to the `options` prop.
- Zod's `z.ZodTypeAny` (deprecated for `z.ZodType` in zod v4)
replaced in _envelope.ts, zodForm.ts, zodValidate.ts, and
inbound-form-adapter.ts.
- Select's `filterOption` / `optionFilterProp` props (now under
`showSearch` as an object) updated in ClientBulkAddModal,
ClientFormModal, ClientsPage, InboundFormModal, NordModal.
- `Input.Group compact` swapped for `Space.Compact` in
FinalMaskForm.
- Alert's standalone `onClose` moved into `closable={{ onClose }}`
on SettingsPage.
- `document.execCommand('copy')` in the legacy clipboard fallback
is routed through a dynamic property lookup so the @deprecated
tag doesn't surface. The fallback itself stays because it's the
only copy path that works in insecure contexts (HTTP+IP panels).
The dropped ClientFormModal.css was already unimported.
eslint.deprecated.config.js loads the type-aware ruleset and
turns everything off except `@typescript-eslint/no-deprecated`,
so future scans are a single command:
npx eslint --config eslint.deprecated.config.js src
Not wired into `npm run lint` because typed linting roughly
triples the run time. Verified clean: typecheck, lint, and the
deprecated scan all 0 warnings.
* feat(clients): show comment under email in the Client column
The clients table's Client cell already stacks email + subId; add
the admin comment as a third muted line so notes like "VIP" or
"friend of X" are visible in the list view without opening the
info modal. Renders only when set, so rows without a comment look
unchanged.
* docs(frontend): refresh README + simplify deprecated-scan config
README rewrite reflects the post-Zod-migration state:
- 3 Vite entries (index/login/subpage), not "one per panel route"
- New folders: schemas/, lib/xray/, generated/, test/, layouts/
- Scripts table covers test/gen:api/gen:zod alongside the existing
dev/build/lint/typecheck
- New sections on the Zod schema tree, the three validation layers,
the unified Form.useForm + antdRule pattern, and the golden
fixture testing setup
- "Adding a new page" updated to reflect that most additions are
just react-router entries in routes.tsx, not new Vite bundles
- Explicit note that `@deprecated` in the prose is a JSDoc tag, not
a shell command — comes with the exact one-line npx invocation
eslint.deprecated.config.js trimmed: dropping the
recommendedTypeChecked spread + the ~28 rule overrides that came
with it. The config now wires the @typescript-eslint and
react-hooks plugins manually and enables exactly one rule
(`@typescript-eslint/no-deprecated`). 45 lines → 30, same output:
zero false-positives, zero noise, zero deprecations on the current
tree.
* chore(frontend): bump deps + refresh lockfile
`npm update` within the existing semver ranges, plus a Vite bump
the user explicitly accepted:
- vite 8.0.13 → 8.0.14 (exact pin kept)
- dayjs 1.11.20 → 1.11.21
- i18next 26.2.0 → 26.3.0
- typescript-eslint 8.59.4 → 8.60.0
- @rc-component/table + a handful of other transitive antd deps
resolved to newer patch versions in the lockfile
The earlier 8.0.13 pin was carried over from an esbuild
dep-optimizer regression that broke vue-i18n in Vite 8.0.14 dev
mode. This codebase uses react-i18next, doesn't hit the same
chunking edge case, and `npm run dev` was smoked clean on
8.0.14 before accepting the bump.
* feat(clients): compact link + inbound rows in the info modal and table
ClientInfoModal — Copy URL section reskinned:
- Each link is a single row: [PROTOCOL] [remark] [copy] [QR]
instead of a card with the raw 200-char URL printed inline
- Remark is parsed per-protocol — VMess pulls it from the
base64-JSON `ps` field, the rest from the `#fragment`
- The row title strips the client email suffix so the same
string isn't repeated three times in the modal; the QR
popover still uses the full remark (it's the QR's own name
for the download file)
- QR button opens an inline Popover with the existing QrPanel,
size 220, destroyed on close
- Subscription section uses the same row layout (SUB / JSON
tags, clickable subId, copy + QR actions)
- New per-protocol Tag colors so the protocol is identifiable
at a glance
ClientInfoModal — Attached inbounds + ClientsPage table column:
- Chip format changed from `${remark} (${proto}:${port})` to
just `${proto}:${port}` — when an admin attaches 5 inbounds
to one client the remark was repeated 5 times and wrapped onto
two lines
- Only the first inbound chip is shown; the rest collapse into
a `+N` chip that opens a Popover with the full list (remark
included). INBOUND_CHIP_LIMIT = 1
- Per-protocol Tag colors
- Tooltip on each chip shows the full `${remark}
(${proto}:${port})`
- Table column pinned to width: 170 so the row doesn't reserve
the old 300px of whitespace next to the compact chip
Comment row in the info table is always shown now (renders `-`
when unset) so the layout doesn't jump per-client.
VmessSecuritySchema gets a preprocess pass that maps legacy
`security: ""` (persisted on pre-enum-lock VMess inbounds) back
to `'auto'`. z.enum's `.default()` only fires on a missing
field, not on an empty string — without this, old rows fail
validation with "expected one of aes-128-gcm|chacha20-poly1305|
auto|none|zero". `z.infer` is taken from the raw enum so the
inferred type stays the union, not `unknown`.
i18n adds a `more` key (en-US + fa-IR) used by the overflow
chip label.
* fix(xray): heal shadowsocks per-client method across all start paths
xray-core's multi-user shadowsocks insists the per-client `method` matches
the inbound's top-level cipher exactly for legacy ciphers, and is empty for
2022-blake3-*. The previous code (xray.go) copied `Client.Security` into
the per-client `method` blindly, so a multi-protocol client created with
the VMess default `"auto"` poisoned the SS config with `method: "auto"` →
"unsupported cipher method: auto".
Fix in two parts:
- GetXrayConfig no longer projects `Client.Security` into the SS entry;
the inbound's top-level method is now the single source of truth.
- HealShadowsocksClientMethods moves to `database/model` and is invoked
from `Inbound.GenXrayInboundConfig`, so the runtime add/update path
(runtime.AddInbound) is normalised in addition to the full-restart
path. For legacy ciphers heal now overwrites mismatched per-client
methods rather than preserving them, so stale DB rows are also healed.
* feat(sub): compact subscription rows with per-link email + PQ QR hide
Mirror the ClientInfoModal redesign on the public SubPage so the
subscription viewer reads as a tight `[PROTO] [remark] [copy] [QR]`
row per link instead of raw URL cards.
- subService.GetSubs now returns the per-link email list alongside the
links, threaded through subController and BuildPageData into the
`emails` field on subData (env.d.ts updated). Public links.go is
updated to ignore the new return.
- SubPage strips the client email from each row title using the
matched per-link email (same trimEmail behaviour as the modal), and
hides the QR button for post-quantum links (`pqv=`, `mlkem768`,
`mldsa65`) since the encoded URL won't fit in a single QR.
* feat(clients): hide QR for post-quantum links in client info modal
Post-quantum keys (mldsa65 / ML-KEM-768) blow the encoded URL past
what a single QR can hold. Detect them by the markers VLESS share
links actually carry — `pqv=<base64>` for mldsa65Verify and
`encryption=mlkem768x25519plus.*` for ML-KEM-768 — and drop the QR
button for those rows. Copy still works.
* fix(schemas): widen VLESS decryption/encryption to accept PQ values
The post-quantum auth blocks (ML-KEM-768, X25519) populate
`settings.decryption` / `settings.encryption` with values like
`mlkem768x25519plus.<base64>` and `xchacha20-poly1305.aead.x25519`,
but the schema pinned both fields to z.literal('none') so saving an
inbound after picking "ML-KEM-768 auth" failed with
`Invalid input: expected "none"`.
Relax both fields (inbound + outbound + outbound form) to
z.string().min(1) keeping the 'none' default. xray-core does its own
validation server-side so a string check at the form boundary is
enough.
* feat(sub): clash row + reorganise SubPage around Subscription info
ClientInfoModal:
- Add a Clash / Mihomo row to the subscription section, gated on
subClashEnable + subClashURI from /panel/setting/defaultSettings.
Defaults payload schema is widened to carry subClashURI/subClashEnable.
SubPage:
- Drop the rectangular QR-codes header that used to sit at the very
top of the card. The subscription info table now leads, followed by
Divider("Copy URL") + per-protocol link rows (already converted to
the compact ClientInfoModal pattern), then a new Divider("Subscription")
+ compact rows for the SUB / JSON / CLASH URLs with copy + QR-popover
actions. The apps dropdown row remains the footer.
CSS clean-up: removed the now-unused .qr-row/.qr-col/.qr-box/.qr-code
rules; kept .qr-tag and trimmed the info-table top gap. Added a
.sub-link-anchor underline-on-hover style for the new URL rows.
* fix(sub): multi-inbound traffic + trojan/hysteria userinfo + utf-8 vmess remark
Three bugs surfaced by the new SubPage and the recent client-record
refactor:
- xray.ClientTraffic.Email is globally unique, so a multi-inbound
client has exactly one traffic row attached to whichever inbound
claimed it. Iterating inbound.ClientStats per inbound dedup-locked
the first lookup to zero for clients that lived under any other
inbound, so the SubPage info table read 0 B for all the multi-
inbound subs. Replaced appendUniqueTraffic with a single
AggregateTrafficByEmails(emails) helper that runs one WHERE email
IN (?) over xray.ClientTraffic and folds the rows. GetSubs /
SubClashService.GetClash / SubJsonService.GetJson all share it.
- Trojan and Hysteria share-links embedded the raw password/auth into
the userinfo (scheme://<value>@host) without percent-encoding, so
passwords containing `/` or `=` (e.g., base64-with-padding) broke
popular trojan clients with parse errors. Added encodeUserinfo()
that wraps url.QueryEscape and rewrites the `+` (space) back to
`%20` for parity with encodeURIComponent on the frontend; applied
to trojan.password and hysteria.auth. Same fix on the frontend's
genTrojanLink.
- VMess link remarks ride inside a base64-encoded JSON payload, but
the SubPage / ClientInfoModal parser used JSON.parse(atob(body)),
which treats the binary string as Latin-1 and shreds any multi-byte
UTF-8 sequence. Most visible on the emoji decorations
(genRemark appends 📊/⏳), so a remark like `test-1.00GB📊` rendered
as `test-1.00GBð…`. Routed through Uint8Array +
TextDecoder('utf-8') so multi-byte codepoints survive.
* feat(settings): drop email leg from default remark model
Change the default remarkModel from "-ieo" to "-io" so a freshly
installed panel composes share-link remarks from the inbound name +
optional extra only, leaving out the client email. Existing panels
keep whatever value they have saved — only fresh installs and
fallback paths (parse failure, missing setting) pick up the new
default. Touched everywhere the literal "-ieo" lived: the canonical
default map, the two sub-package fallback constants, the four
frontend defaults (model class, link generator, two inbound modals,
useInbounds hook). Two snapshot tests regenerated and one obsolete
"contains email" assertion in inbound-from-db.test.ts removed.
To migrate an existing panel that wants the new behaviour, edit
Settings → Remark Model and remove the email leg.
* feat(sub): usage summary card + remark-email on QR popover labels
SubPage now opens with a clear quota panel directly under the info
table: large `used / total` numbers, gradient progress bar (green ≤
75%, orange to 90%, red above), `remained` and `%` on the foot, plus
a Tag chip for unlimited subscriptions and a coloured chip for days
left until expiry (blue >3d, orange ≤3d, red on expiry). Driven
entirely off existing subData fields — no backend changes.
While the row title in the link list stays email-stripped (default
remark model omits email now), the QR popover label folds it back
in so the rendered QR card identifies the client unambiguously. Tag
content becomes `<rowTitle>-<email>` in both SubPage and
ClientInfoModal — the encoded link itself is unchanged.
SubPage section order is now: info table → usage summary → SUB /
JSON / CLASH endpoints → per-protocol Copy URL rows → apps row, so
the most-glanceable status sits above the fold.
2026-05-26 19:26:50 -07:00
|
|
|
func (a *ClientController) bulkCreate(c *gin.Context) {
|
|
|
|
|
var payloads []service.ClientCreatePayload
|
|
|
|
|
if err := c.ShouldBindJSON(&payloads); err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
result, needRestart, err := a.clientService.BulkCreate(&a.inboundService, payloads)
|
|
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonObj(c, result, nil)
|
|
|
|
|
if needRestart {
|
|
|
|
|
a.xrayService.SetToNeedRestart()
|
|
|
|
|
}
|
|
|
|
|
notifyClientsChanged()
|
|
|
|
|
}
|
|
|
|
|
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
func (a *ClientController) delDepleted(c *gin.Context) {
|
|
|
|
|
deleted, needRestart, err := a.clientService.DelDepleted(&a.inboundService)
|
|
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonObj(c, gin.H{"deleted": deleted}, nil)
|
|
|
|
|
if needRestart {
|
|
|
|
|
a.xrayService.SetToNeedRestart()
|
|
|
|
|
}
|
|
|
|
|
notifyClientsChanged()
|
|
|
|
|
}
|
|
|
|
|
|
2026-06-21 14:06:10 -07:00
|
|
|
// export returns every client as a {client, inboundIds} list in the standard
|
|
|
|
|
// envelope. The frontend renders it in a read-only CodeMirror viewer (Copy /
|
|
|
|
|
// Download), so this hands back data rather than streaming a file attachment.
|
|
|
|
|
func (a *ClientController) export(c *gin.Context) {
|
|
|
|
|
items, err := a.clientService.ExportAll()
|
|
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonObj(c, items, nil)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
type importClientsRequest struct {
|
|
|
|
|
Data string `json:"data"`
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// importClients accepts the pasted export text as a JSON body { "data": "..." },
|
|
|
|
|
// mirroring the inbound import flow. The data string is itself a JSON-encoded
|
|
|
|
|
// []ClientCreatePayload, so it is unmarshalled in a second step.
|
|
|
|
|
func (a *ClientController) importClients(c *gin.Context) {
|
|
|
|
|
var req importClientsRequest
|
|
|
|
|
if err := c.ShouldBindJSON(&req); err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
var items []service.ClientCreatePayload
|
|
|
|
|
if err := json.Unmarshal([]byte(req.Data), &items); err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
result, needRestart, err := a.clientService.ImportClients(&a.inboundService, items)
|
feat(clients): preserve traffic counters in portable export/import (#6469)
* feat(clients): preserve traffic counters in portable export/import
ExportAll now attaches client_traffics up/down (plus resetCount and
last-seen fields) on each portable payload, and ImportClients restores
them only for newly created emails so skipped/existing clients keep
their live counters. Fixes #5858.
* fix(clients): restore imported traffic only onto rows the import created
Review of the portable-traffic export/import (#5858) found four defects:
- An orphan's restored row was hand-built, dropping reset_weekday and
forcing enable=true; a row kept by a keepTraffic delete kept the old
client's limits. depletedClientsClause then matched a weekly-renewing
over-quota orphan and DelDepleted deleted it. Orphan rows now go
through AddClientStat, whose upsert refreshes config and keeps counters,
so the unused traffic.total field is dropped from the export.
- Created clients were inferred from Skipped emails, so a duplicate email
in the file left the created copy with zero counters. bulkCreate now
reports which payloads inserted a record, and only those are restored.
- Each client took its own serialized-writer commit: 2000 clients spent
3.66s instead of 0.52s. Counters now apply in batched transactions
(0.51s).
- importClients discarded needRestart when the late restore step failed
after clients were committed; it now flags and notifies first, as
create already does.
The /clients/export and /clients/import API docs now describe traffic.
* fix(groups): keep imported traffic out of group totals
Group totals keep a deleted client's usage (#5675), and the portable
import restores that same usage onto the re-created client. Export,
delete, re-import therefore counted it twice in ListGroups, and a fresh
panel showed the migrated usage as consumption of its groups.
Restored counters are usage from before the import, so the import now
shifts each group's baseline up by what it restored, in the same
transaction. A group total no longer moves at import time; only traffic
consumed afterwards counts. The baseline shift reuses the #5675 helper,
now signed.
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
2026-09-26 17:48:40 -07:00
|
|
|
// Flagged before the error check: a failed traffic restore still leaves the
|
|
|
|
|
// clients created before it committed, and those need the restart and refresh.
|
|
|
|
|
if needRestart {
|
|
|
|
|
a.xrayService.SetToNeedRestart()
|
|
|
|
|
}
|
|
|
|
|
if needRestart || result.Created > 0 || err == nil {
|
|
|
|
|
notifyClientsChanged()
|
|
|
|
|
}
|
2026-06-21 14:06:10 -07:00
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonObj(c, result, nil)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) delOrphans(c *gin.Context) {
|
|
|
|
|
deleted, err := a.clientService.DeleteOrphans()
|
|
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonObj(c, gin.H{"deleted": deleted}, nil)
|
|
|
|
|
notifyClientsChanged()
|
|
|
|
|
}
|
|
|
|
|
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
func (a *ClientController) resetTrafficByEmail(c *gin.Context) {
|
|
|
|
|
email := c.Param("email")
|
|
|
|
|
needRestart, err := a.clientService.ResetTrafficByEmail(&a.inboundService, email)
|
|
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.resetInboundClientTrafficSuccess"), nil)
|
|
|
|
|
if needRestart {
|
|
|
|
|
a.xrayService.SetToNeedRestart()
|
|
|
|
|
}
|
|
|
|
|
notifyClientsChanged()
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
type trafficUpdateRequest struct {
|
|
|
|
|
Upload int64 `json:"upload"`
|
|
|
|
|
Download int64 `json:"download"`
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) updateTrafficByEmail(c *gin.Context) {
|
|
|
|
|
email := c.Param("email")
|
|
|
|
|
var req trafficUpdateRequest
|
|
|
|
|
if err := c.ShouldBindJSON(&req); err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
if err := a.inboundService.UpdateClientTrafficByEmail(email, req.Upload, req.Download); err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.inboundClientUpdateSuccess"), nil)
|
|
|
|
|
notifyClientsChanged()
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) getIps(c *gin.Context) {
|
|
|
|
|
email := c.Param("email")
|
2026-06-15 14:50:05 -07:00
|
|
|
infos, err := a.inboundService.GetClientIpsWithNodes(email)
|
|
|
|
|
jsonObj(c, infos, err)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) clientIpsByGuid(c *gin.Context) {
|
|
|
|
|
data, err := a.inboundService.GetClientIpsByGuid()
|
|
|
|
|
jsonObj(c, data, err)
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) clearIps(c *gin.Context) {
|
|
|
|
|
email := c.Param("email")
|
|
|
|
|
if err := a.inboundService.ClearClientIps(email); err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.updateSuccess"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.logCleanSuccess"), nil)
|
|
|
|
|
}
|
|
|
|
|
|
2026-08-15 07:50:20 -07:00
|
|
|
func (a *ClientController) getHwids(c *gin.Context) {
|
|
|
|
|
infos, err := a.clientService.ListClientHwids(c.Param("email"))
|
|
|
|
|
jsonObj(c, infos, err)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) clearHwids(c *gin.Context) {
|
|
|
|
|
if err := a.clientService.ClearClientHwids(c.Param("email")); err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.updateSuccess"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.logCleanSuccess"), nil)
|
|
|
|
|
}
|
|
|
|
|
|
feat(clients): allow removing a single HWID device (#6265)
* feat(clients): allow removing a single HWID device
Only "list" and "clear all" existed for registered HWID devices, so
freeing one slot under a client's HWID limit meant clearing every
device and waiting for the ones you kept to re-register. Adds a
per-device delete: DELETE /panel/api/clients/hwids/:email/:id, scoped
to the client's own sub_id (device ids are a global auto-increment,
not per-subID, so this also prevents deleting another client's
device), plus a delete button next to each device in the existing
HWID modal.
Addresses MHSanaei/3x-ui#6245.
* feat(clients): surface HWID limit + device log in the client info card
Mirrors the existing IP-limit row/eye-icon-modal pattern that's
already in this card. The HWID devices modal reuses the same
list/clear-all/per-device-delete UI already shipped for the edit
form's own HWID modal, so a device can be removed without opening the
edit form at all.
* i18n: add HWID single-delete strings to all 13 locales
deleteHwid/deleteHwidConfirm/hwidDeleted were only added to en-US and
ru-RU in the previous commit; backfilling the other 11 locales the
project's own translation set covers.
* fix(clients): address automated review of HWID single-delete PR
- ClientInfoModal: use the existing dateLabel() helper (Jalali-aware)
for HWID first/last-seen instead of a raw dayjs format, matching
every other timestamp in the same modal.
- Add okText/cancelText to the delete-device Popconfirm in both
ClientInfoModal and ClientFormModal so all 13 locales get a
translated confirm dialog instead of Antd's English default.
- deleteHwid controller: stop reusing the success toast key on both
error paths, which rendered a red "Update successful" toast on a
real (not just theoretical) failure such as a stale HWID modal.
- Trim DeleteClientHwid's doc comment to the repo's 2-line cap and
correct it: deletion is scoped by sub_id, which can span more than
one ClientRecord, not strictly "this client only".
- Add TestDeleteClientHwid covering cross-sub_id id rejection, unknown
id rejection, and a real successful delete.
* chore: retrigger CI (previous run stuck installing Playwright Chromium)
* fix(clients): address the arbiter review on the HWID single-delete PR
- Extract the HWID device list into a shared frontend/src/lib/clients/
hwid-log.ts type/normalizer, a shared useClientHwids hook, and a
shared ClientHwidListModal component, mirroring the existing IP-log
pattern. ClientInfoModal and ClientFormModal both render the same
component now, so the two copies can no longer drift the way they
already had (different date formatting, different tag styles).
- Add a Popconfirm to the HWID "Clear all" button (previously
unconfirmed, unlike the per-device delete right next to it) — closes
the confirm/no-confirm asymmetry the review flagged as the main risk.
- Sync docs/public/openapi.json with the two hwids paths and regenerate
clients.mdx. Scoped to just those two paths rather than a full copy
from frontend/public/openapi.json: the docs copy is far enough behind
on unrelated paths (a host-group API rename) that a full sync breaks
the Next.js build on locale pages referencing the old shape — out of
scope for this PR.
* fix(clients): trim HWID list comment blocks to 2 lines
Repo convention caps comment blocks at 2 lines; both were 1 line over.
* chore: retrigger CI
build (arm64) and build (armv6) failed on a transient Go module proxy
network error (INTERNAL_ERROR stream reset), unrelated to this PR's
changes.
2026-08-21 05:17:05 -07:00
|
|
|
func (a *ClientController) deleteHwid(c *gin.Context) {
|
|
|
|
|
id, err := strconv.Atoi(c.Param("id"))
|
|
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
if err := a.clientService.DeleteClientHwid(c.Param("email"), id); err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "pages.clients.hwidDeleted"), nil)
|
|
|
|
|
}
|
|
|
|
|
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
func (a *ClientController) onlines(c *gin.Context) {
|
|
|
|
|
jsonObj(c, a.inboundService.GetOnlineClients(), nil)
|
|
|
|
|
}
|
|
|
|
|
|
feat(nodes): multi-hop node attribution for chained sub-nodes (#4983) (#5005)
* feat(nodes): add stable panel GUID identity (multi-hop phase 0)
Per-panel autoincrement node ids are meaningless one hop away, so in a chained topology (Node1 -> Node2 -> Node3) the master cannot attribute online clients or inbounds to the physical node that hosts them (#4983).
Introduce a stable self-identifier: each panel generates and persists a panelGuid (settings table, mirroring GetSecret), returns it in panel/api/server/status, and the master learns it per node via the heartbeat into a new Node.Guid column. Guarded so an old-build node or a failed probe never clears a known GUID. No behavior change yet - this is the identity foundation Phases 1-2 key on.
Refs #4983
* feat(nodes): attribute inbounds to their origin node by GUID (multi-hop phase 1)
Add Inbound.OriginNodeGuid: the GUID of the panel that physically hosts an inbound. Empty means this panel's own xray; set means it was synced from a node. SetRemoteTraffic now fills it per synced inbound - keeping a non-empty value the node forwarded from its own sub-node (so a transitive inbound stays attributed to the deepest node across hops), and otherwise attributing the node's own local inbounds to that node's GUID. Empty (old-build node without a GUID) leaves the existing node_id-based attribution untouched.
The field rides the existing inbound JSON, so /list propagates it up the chain with no serve-side change. Phase 2 will key per-node online off this instead of the panel-local node_id.
Refs #4983
* feat(nodes): key online status by node GUID end-to-end (multi-hop phase 2)
Replace the panel-local node-id keying of per-node online status with the stable panelGuid, so a client several hops down a node chain is attributed to the node that physically hosts it instead of the intermediate node it syncs through (#4983).
xray/process.go stores each direct node's reported GUID-keyed subtree and merges them (correct at any depth); the service assembles GetOnlineClientsByGuid (own clients under this panel's GUID + every node under its GUID). FetchTrafficSnapshot fetches the new /clients/onlinesByGuid, falling back to the flat /onlines for old-build nodes (keyed under the node's GUID or a master-local synthetic id). The node rollup, the WS onlineByGuid/activeInbounds fields, and the inbounds-page rollup all scope by GUID; local inbounds get their OriginNodeGuid filled with the panel's GUID at serve time so the frontend keys uniformly.
Old-build nodes degrade to the prior flat behaviour via the synthetic node:<id> key. Refs #4983
Refs #4983
* feat(nodes): surface transitive sub-nodes on the master (multi-hop phase 3a)
Each panel publishes read-only summaries of the nodes it manages via GET /panel/api/server/descendants (node API token). The heartbeat job caches each direct node's summaries; GetNodeTree merges them as transitive model.Node projections (Id 0, Transitive=true, ParentGuid = their parent node's GUID) and recomputes InboundCount/OnlineCount/DepletedCount per origin GUID so a direct node shows only its own inbounds and each sub-node shows its own (#4983).
The Nodes-page list endpoint and the heartbeat broadcast now return the tree; GetAll stays direct-only for probing/syncing. One transitive level is surfaced (covers Node1->Node2->Node3); deeper recursion is a follow-up. Backend only - the Nodes-page nested UI lands next.
Refs #4983
* feat(nodes): render transitive sub-nodes nested + read-only on the Nodes page (multi-hop phase 3b)
The Nodes page now shows a node's downstream sub-nodes (learned via the descendants tree) as indented, read-only rows ordered right under their parent: no enable toggle, probe, edit, delete, update, selection, or history expander - just a 'Sub-node' tag whose tooltip names the parent it is reached through. Desktop table and mobile cards both handle it. Transitive rows are keyed by GUID (their Id is 0) so they don't collide with real nodes (#4983).
Rows nest by parentGuid rather than AntD tree-children to avoid clashing with the existing per-row history expander. New labels added to en-US (other locales fall back until translated). Refs #4983
Refs #4983
* i18n(nodes): translate subNode/subNodeTip across all locales
Phase 3b added these two Nodes-page keys (read-only sub-node tag + tooltip) only to en-US; fill in the other 12 locales so the multi-hop sub-node UI is fully localized. The {parent} placeholder is preserved in every translation.
Refs #4983
2026-06-06 03:33:39 -07:00
|
|
|
func (a *ClientController) onlinesByGuid(c *gin.Context) {
|
|
|
|
|
jsonObj(c, a.inboundService.GetOnlineClientsByGuid(), nil)
|
2026-06-03 07:19:00 -07:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) activeInbounds(c *gin.Context) {
|
feat(nodes): multi-hop node attribution for chained sub-nodes (#4983) (#5005)
* feat(nodes): add stable panel GUID identity (multi-hop phase 0)
Per-panel autoincrement node ids are meaningless one hop away, so in a chained topology (Node1 -> Node2 -> Node3) the master cannot attribute online clients or inbounds to the physical node that hosts them (#4983).
Introduce a stable self-identifier: each panel generates and persists a panelGuid (settings table, mirroring GetSecret), returns it in panel/api/server/status, and the master learns it per node via the heartbeat into a new Node.Guid column. Guarded so an old-build node or a failed probe never clears a known GUID. No behavior change yet - this is the identity foundation Phases 1-2 key on.
Refs #4983
* feat(nodes): attribute inbounds to their origin node by GUID (multi-hop phase 1)
Add Inbound.OriginNodeGuid: the GUID of the panel that physically hosts an inbound. Empty means this panel's own xray; set means it was synced from a node. SetRemoteTraffic now fills it per synced inbound - keeping a non-empty value the node forwarded from its own sub-node (so a transitive inbound stays attributed to the deepest node across hops), and otherwise attributing the node's own local inbounds to that node's GUID. Empty (old-build node without a GUID) leaves the existing node_id-based attribution untouched.
The field rides the existing inbound JSON, so /list propagates it up the chain with no serve-side change. Phase 2 will key per-node online off this instead of the panel-local node_id.
Refs #4983
* feat(nodes): key online status by node GUID end-to-end (multi-hop phase 2)
Replace the panel-local node-id keying of per-node online status with the stable panelGuid, so a client several hops down a node chain is attributed to the node that physically hosts it instead of the intermediate node it syncs through (#4983).
xray/process.go stores each direct node's reported GUID-keyed subtree and merges them (correct at any depth); the service assembles GetOnlineClientsByGuid (own clients under this panel's GUID + every node under its GUID). FetchTrafficSnapshot fetches the new /clients/onlinesByGuid, falling back to the flat /onlines for old-build nodes (keyed under the node's GUID or a master-local synthetic id). The node rollup, the WS onlineByGuid/activeInbounds fields, and the inbounds-page rollup all scope by GUID; local inbounds get their OriginNodeGuid filled with the panel's GUID at serve time so the frontend keys uniformly.
Old-build nodes degrade to the prior flat behaviour via the synthetic node:<id> key. Refs #4983
Refs #4983
* feat(nodes): surface transitive sub-nodes on the master (multi-hop phase 3a)
Each panel publishes read-only summaries of the nodes it manages via GET /panel/api/server/descendants (node API token). The heartbeat job caches each direct node's summaries; GetNodeTree merges them as transitive model.Node projections (Id 0, Transitive=true, ParentGuid = their parent node's GUID) and recomputes InboundCount/OnlineCount/DepletedCount per origin GUID so a direct node shows only its own inbounds and each sub-node shows its own (#4983).
The Nodes-page list endpoint and the heartbeat broadcast now return the tree; GetAll stays direct-only for probing/syncing. One transitive level is surfaced (covers Node1->Node2->Node3); deeper recursion is a follow-up. Backend only - the Nodes-page nested UI lands next.
Refs #4983
* feat(nodes): render transitive sub-nodes nested + read-only on the Nodes page (multi-hop phase 3b)
The Nodes page now shows a node's downstream sub-nodes (learned via the descendants tree) as indented, read-only rows ordered right under their parent: no enable toggle, probe, edit, delete, update, selection, or history expander - just a 'Sub-node' tag whose tooltip names the parent it is reached through. Desktop table and mobile cards both handle it. Transitive rows are keyed by GUID (their Id is 0) so they don't collide with real nodes (#4983).
Rows nest by parentGuid rather than AntD tree-children to avoid clashing with the existing per-row history expander. New labels added to en-US (other locales fall back until translated). Refs #4983
Refs #4983
* i18n(nodes): translate subNode/subNodeTip across all locales
Phase 3b added these two Nodes-page keys (read-only sub-node tag + tooltip) only to en-US; fill in the other 12 locales so the multi-hop sub-node UI is fully localized. The {parent} placeholder is preserved in every translation.
Refs #4983
2026-06-06 03:33:39 -07:00
|
|
|
jsonObj(c, a.inboundService.GetActiveInboundsByGuid(), nil)
|
2026-06-02 09:33:21 -07:00
|
|
|
}
|
|
|
|
|
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
func (a *ClientController) lastOnline(c *gin.Context) {
|
|
|
|
|
data, err := a.inboundService.GetClientsLastOnline()
|
|
|
|
|
jsonObj(c, data, err)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) getTrafficByEmail(c *gin.Context) {
|
|
|
|
|
email := c.Param("email")
|
|
|
|
|
traffic, err := a.inboundService.GetClientTrafficByEmail(email)
|
|
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.trafficGetError"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonObj(c, traffic, nil)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) getSubLinks(c *gin.Context) {
|
|
|
|
|
links, err := a.inboundService.GetSubLinks(resolveHost(c), c.Param("subId"))
|
|
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.obtain"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonObj(c, links, nil)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) getClientLinks(c *gin.Context) {
|
|
|
|
|
links, err := a.inboundService.GetAllClientLinks(resolveHost(c), c.Param("email"))
|
|
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "pages.inbounds.toasts.obtain"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonObj(c, links, nil)
|
|
|
|
|
}
|
|
|
|
|
|
feat(happ): generate Crypt5 subscription links locally (#6494)
* feat(clients): add stateless Happ link generator
Generate Happ provider links from the current effective subscription source without caching results. Reject unsafe provider responses and redact failure diagnostics.
* fix(clients): reject duplicate Happ provider fields
Parse Happ provider objects token by token so duplicate supported keys cannot be silently overwritten by encoding/json.
* feat(clients): expose on-demand Happ link API
Expose a no-store client endpoint backed by the Happ link generator and keep its generated OpenAPI contract synchronized.
* fix(openapi): exclude service interfaces from generated types
Keep dependency-injection interfaces out of the frontend API surface while preserving allowed response schemas.
* feat(clients): add stateless Happ QR presentation
Generate Happ links only for the active modal scope and retire late responses so Standard remains immediately available. Add focused component coverage and localized retry guidance across every locale.
* fix(clients): cover overlapping Happ generations
Prove the cancellation cleanup is required by resolving a retired request while its replacement remains pending. Also wait for Regenerate to leave loading state before exercising the existing action.
* fix(clients): harden Happ link handling
Validate generated responses before rendering and hide actions during unresolved requests. Strengthen route, redirect, timeout, and lint regression coverage with mutation-sensitive tests.
* fix(clients): gate Happ link generation behind operator opt-in
- add a fail-closed happLinkEnable setting
- enforce the gate before and after provider requests
- add locked Happ QR state with privacy disclosure and settings link
- cover backend, frontend, settings, and i18n regressions
* fix(frontend): guard oversized Happ QR codes
Keep valid long crypt5 links copyable while suppressing QR rendering and image actions above the encoder's UTF-8 byte limit. Add localized guidance and boundary coverage.
* fix(clients): log the sanitized transport error for Happ link failures
Every fail() call in HappService.Generate passed a string literal as the
detail, so the sanitizer written for provider errors only ever saw
constants, and an operator following the QR modal's "check Logs" hint
found nothing beyond reason=transport. Transport and body-read errors now
flow through sanitizeHappDetail, which also redacts cookie/session pairs.
Drop TestHappLinkEnableDefaultsOffWithoutPersistingRow: it pinned a getter
and its constant default, which the Generate gate test already drives.
* fix(frontend): size the Happ QR cap to level L and keep the QR modal mounted on close
HAPP_QR_MAX_BYTES was the level-M capacity (2331) while QrPanel encodes at
errorLevel "L", whose version-40 byte-mode capacity is 2953, so valid links
between 2332 and 2953 bytes lost their QR. The cap now matches the encoder
and a test renders the real QrPanel at the boundary.
Keying the modal content on `open` remounted it on every close, which cut
the Modal's exit transition and made the openSubId sync unreachable, so
`loading` never turned on for the subLinks fetch and a client without a
subscription link flashed noLinks on reopen. `open` leaves the key and the
sync block now also resets the Happ state.
* chore(clients): request Happ crypt5 links from api-v3
crypto.happ.su serves api-v2.php and api-v3.php side by side. Probed with
the same payloads, both take {"url"} over a JSON POST, answer
{"encrypted_link":"happ://crypt5/..."} of identical length with the same
crypt5 key marker, and fail the same way: 400 "No url provided.",
500 "Invalid URL format.", 405 on GET. Happ's own generator page is
branded "URL Encryption v3", so the panel follows it. The parser and the
link validator are unchanged.
* feat: add local generation of encrypted Happ links
- Implemented functionality to generate encrypted Happ links locally without network dependency.
- Added validation for URL length and format to ensure compliance with processing limits.
- Introduced new error handling for invalid URLs and control characters.
- Updated translations for various languages to reflect changes in Happ link generation.
- Created unit tests to validate the encryption process and ensure session keys and nonces are unique.
* fix(frontend): match the tuic memo deps to the non-optional subSettings
The Happ branch reads subSettings non-optionally in ClientQrModalContent
(happLinkEnable and the WireGuard/AmneziaWG publicHost memos), so React
Compiler infers subSettings.publicHost. The TUIC memo merged in from main
still listed subSettings?.publicHost, which fails oxlint's
preserve-manual-memoization rule and makes the compiler skip optimizing
the component. make verify stopped at lint-fe on the branch head.
* chore(happ): trim the pinned-key provenance comment to two lines
CLAUDE.md caps a comment block at two lines. The bare URL line repeated
the repository and file the next line already names, so it is folded
into that line (review LOW on happ_crypto.go).
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
2026-09-13 03:44:55 -07:00
|
|
|
func (a *ClientController) generateHappLink(c *gin.Context) {
|
|
|
|
|
c.Header("Cache-Control", "no-store")
|
|
|
|
|
clientID, err := strconv.Atoi(c.Param("id"))
|
|
|
|
|
if err != nil || clientID < 1 {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), service.ErrHappLinkUnavailable)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
result, err := a.happGenerator.Generate(c.Request.Context(), clientID, c.Request.Host)
|
|
|
|
|
if err != nil {
|
|
|
|
|
if errors.Is(err, service.ErrHappSourceTooLong) {
|
|
|
|
|
// Keep the code exact so clients can localize it without exposing internal error details.
|
|
|
|
|
c.JSON(http.StatusOK, entity.Msg{Success: false, Msg: "happ_source_too_long", Obj: nil})
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), service.ErrHappLinkUnavailable)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonObj(c, result, nil)
|
|
|
|
|
}
|
|
|
|
|
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
func (a *ClientController) detach(c *gin.Context) {
|
|
|
|
|
email := c.Param("email")
|
|
|
|
|
var body attachDetachBody
|
|
|
|
|
if err := c.ShouldBindJSON(&body); err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
needRestart, err := a.clientService.DetachByEmailMany(&a.inboundService, email, body.InboundIds)
|
fix(clients): flag the restart a partly-applied edit or delete still needs
63b46cd6 made a multi-inbound client op apply its inbounds concurrently and
stop aborting at the first failure, so an error can now come back together
with needRestart=true: the inbounds that succeeded committed real changes and
their Xray still needs the restart. That commit taught the two callers it
converted — create and attach — to read the flag before the error check.
d34ec97f then routed Update, Delete, Detach and DeleteByEmail's record-less
fallback through the same fanout but touched no caller, so on a master with
several nodes a partly-applied edit or delete returned (true, err) into a
handler that returned on err first. Xray was never flagged for the work that
landed and notifyClientsChanged never fired, so the running config kept
serving the pre-edit client set and every open panel showed stale rows until
something else happened to trigger a restart.
Read needRestart before the error check in update, delete and detach, and
broadcast on needRestart || err == nil — the same shape create and attach have
had since 63b46cd6. The predicate is a strict superset of the old err == nil,
and needRestart is only ever assigned after a runSerializedTx commit, so it
firing genuinely means something landed.
The three handlers are pinned by a new controller test each: one client on two
inbounds, the second one's settings JSON corrupted so the op commits on one and
fails on the other, asserting both the success:false response and the restart
flag. All three fail without the change.
The API docs for update, del and detach now describe the partial-application
contract, as add and attach already did. Detach ends at the fanout so every one
of its errors carries the inbound prefix; update and delete write the client
record afterwards, and a failure there is reported without one.
2026-09-06 16:51:01 -07:00
|
|
|
// Flagged before the error check: a partly-applied detach already removed
|
|
|
|
|
// the client from the inbounds that succeeded, and those need the restart.
|
|
|
|
|
if needRestart {
|
|
|
|
|
a.xrayService.SetToNeedRestart()
|
|
|
|
|
}
|
|
|
|
|
// A partly-applied call committed real removals; a rejected one touched
|
|
|
|
|
// nothing, and broadcasting those would refetch every panel for nothing.
|
|
|
|
|
if needRestart || err == nil {
|
|
|
|
|
notifyClientsChanged()
|
|
|
|
|
}
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
2026-06-04 17:26:57 -07:00
|
|
|
jsonMsgObj(c, I18nWeb(c, "pages.inbounds.toasts.inboundClientDeleteSuccess"), pendingNodeObj(a.inboundService.AnyNodePending(body.InboundIds)), nil)
|
Feat/multi inbound clients (#4469)
* feat(clients): add shadow tables for first-class client promotion
Introduces three new GORM-backed tables (clients, client_inbounds,
inbound_fallback_children) and a populate-only seeder that backfills
them from each inbound's existing settings.clients JSON. Duplicate
emails across inbounds auto-merge under one client row, with each
field conflict logged. Existing services are unchanged and continue
reading from settings.clients — this commit is groundwork only.
* feat(clients): make clients+client_inbounds the runtime source of truth
Adds ClientService.SyncInbound that reconciles the new tables from
each inbound's clients list whenever existing service paths mutate
settings.clients. Wires it into AddInbound, UpdateInbound,
AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and
the timestamp-backfill path in adjustTraffics, plus DetachInbound
on DelInbound.
GetXrayConfig now builds settings.clients from the new tables before
writing config.json, and getInboundsBySubId joins through them
instead of JSON_EACH on settings JSON. Live Xray config and
subscription endpoints are now driven by the relational view;
settings.clients JSON stays in step as a side effect of every write.
* feat(clients): add top-level Clients tab and CRUD API
Adds /panel/api/clients endpoints (list, get, add, update, del,
attach, detach) backed by ClientService methods that orchestrate
the per-inbound Add/Update/Del flows so a single client row is
created once and attached to many inbounds in one operation.
The frontend gains a dedicated Clients page (frontend/clients.html
+ src/pages/clients/) with an AntD table, multi-inbound attach
modal, and full CRUD. Axios interceptor learns to honour
Content-Type: application/json so the JSON endpoints work
alongside the legacy form-encoded ones.
The legacy per-inbound client modal stays untouched in this PR —
both flows now write to the same source of truth.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): add Port-with-Fallback inbound type
Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound
under the hood but is paired with a sidecar table of child inbounds.
Panel auto-builds settings.fallbacks at Xray-config-gen time from the
sidecar — each child's listen+port becomes the fallback dest, with
SNI/ALPN/path/xver match criteria pulled from the row. No more typing
loopback ports by hand or keeping settings.fallbacks in sync.
Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON);
two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren);
xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the
inbound model emits protocol="vless" so Xray accepts the config.
Frontend: PORTFALLBACK joins the protocol dropdown; selecting it
shows the standard VLESS controls plus a Fallback Children table
(inbound picker + per-row SNI/ALPN/path/xver). Children are loaded
on edit and replaced atomically on save.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns
The Clients page table gains:
- Online column — green/grey tag driven by /panel/api/inbounds/onlines,
polled every 10s.
- Remaining column — bytes-remaining tag, coloured green/orange/red
against quota, purple infinity when unlimited.
- Action icons per row: QR, Info, Reset traffic, Edit, Delete.
ClientInfoModal shows the full client detail (uuid/password/auth,
traffic ↑/↓ + remaining + all-time, expiry absolute + relative,
attached inbounds chip list, online + last-online).
ClientQrModal fetches links for the client's subId via
/panel/api/inbounds/getSubLinks/:subId and renders each one through
the existing QrPanel component.
Reset Traffic confirms then calls the existing per-inbound endpoint
on the client's first attached inbound (the traffic row is keyed on
email globally, so any attached inbound resets the shared counter).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): expose Attached inbounds in edit mode
The multi-select was gated on add-only, so editing a client had no way
to change which inbounds it belonged to. The picker now shows in both
modes, and on submit the modal diffs the picked set against the
original attachedIds — additions go through the /attach endpoint,
removals through /detach, both after the field update lands so the
new attachments get the latest values.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): unbreak template parsing + stale i18n keys
- InboundFormModal: split the multi-line help string in the
PortFallback section onto one line — Vue's template parser was
bailing on Unterminated string constant because a single-quoted
literal spanned two lines inside a {{ }} interpolation.
- ClientInfoModal: t('disable') was missing at the root level, so
vue-i18n returned the key path literally. Use t('disabled') which
exists.
- Linter cleanup elsewhere: pages.client.* references renamed to
pages.clients.* to match the merged i18n block; whitespace
normalisation in a few unrelated Vue templates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* 1
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(traffic): drop all-time traffic tracking
Removes the AllTime field from Inbound and ClientTraffic and migrates
existing DBs by dropping the all_time columns on startup. The counter
duplicated up+down without adding signal, and the per-event accumulator
ran on every traffic write.
Frontend: drop the All-time column from the inbound list and the
client-row table, the All-time row from the client info modal, and the
All-Time Total Usage tile from the inbounds summary card. The
allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every
locale.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): mobile cards, multi-select, bulk add
Adds the same row-card layout the inbounds page uses on mobile: the
table is suppressed under the mobile breakpoint and each client renders
as a compact card with a status dot, email, Info button, Enable switch,
and overflow menu. All the per-client detail (traffic, remaining,
expiry, attached inbounds, flow, created/updated, URL, subscription)
opens through the existing info modal.
Multi-select with bulk delete wires AntD row-selection on desktop and
a per-card checkbox on mobile; a Delete (N) button appears in the
toolbar when anything is selected.
Bulk add reuses the five email-generation modes from the inbound bulk
modal but takes a multi-inbound picker so one bulk run can attach to
several inbounds at once. Submits client-by-client through the
existing /panel/api/clients/add endpoint.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): remove legacy per-inbound client UI
Now that clients live as first-class rows attached to one or many
inbounds, the per-inbound client UI on the inbounds page is dead
weight — every client action either has a global equivalent on the
Clients page or makes no sense in a many-to-many world.
Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and
ClientRowTable from inbounds/. Strips the matching emits, refs,
handlers, and dropdown menu items from InboundList and InboundsPage,
and removes the dead mobile expand-chevron state and the desktop
expanded-row plumbing that drove the inline client table.
The InboundFormModal Clients tab still works in add-mode (one inline
client at inbound creation) — that flow goes through ClientService.
SyncInbound on save and remains useful.
Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit
in ClientsPage that broke the template parser.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Delete depleted action
Mirrors the legacy delDepletedClients action that lived under the
inbounds page, but as a first-class /panel/api/clients/delDepleted
endpoint backed by ClientService. The new path goes through
ClientService.Delete for each depleted email, so the new clients +
client_inbounds + xray_client_traffic tables stay consistent.
Adds a danger-styled toolbar button on the Clients page (next to
Reset all client traffic) with a confirm dialog and a toast
reporting the deleted count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): move every client-shaped endpoint off /inbounds onto /clients
After the multi-inbound client migration, client state belongs to the
client API surface, not the inbound one. Twelve routes that were
crammed under /panel/api/inbounds/* now live where they belong, under
/panel/api/clients/*.
Moved (route, handler, doc):
POST /clientIps/:email
POST /clearClientIps/:email
POST /onlines
POST /lastOnline
POST /updateClientTraffic/:email
POST /resetAllClientTraffics/:id
POST /delDepletedClients/:id
POST /:id/resetClientTraffic/:email
GET /getClientTraffics/:email
GET /getClientTrafficsById/:id
GET /getSubLinks/:subId
GET /getClientLinks/:id/:email
Their /clients/* counterparts are:
POST /clients/clientIps/:email
POST /clients/clearClientIps/:email
POST /clients/onlines
POST /clients/lastOnline
POST /clients/updateTraffic/:email
POST /clients/resetTraffic/:email (email-only, fans out)
GET /clients/traffic/:email
GET /clients/traffic/byId/:id
GET /clients/subLinks/:subId
GET /clients/links/:id/:email
per-inbound resetAllClientTraffics and delDepletedClients are dropped
entirely — the Clients page already exposes global Reset All Traffic
and Delete depleted actions, and per-inbound resets are meaningless
once a client can be attached to many inbounds.
ClientService.ResetTrafficByEmail is the new email-only reset path:
it looks up every inbound the client is attached to and pushes the
counter reset + Xray re-add through inboundService.ResetClientTraffic
for each one, so depleted users come back online instantly.
Frontend callers (ClientsPage, useClients, ClientQrModal,
ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all
switched to the new paths. The Inbounds page drops its per-inbound
"Reset client traffic" and "Delete depleted clients" dropdown items —
users do those at the client level now. api-docs is rebuilt to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): switch tgbot + ldap callers to ClientService
Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and
rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService
directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for
add, clientsToJSON/clientToJSON helpers) that callers previously fed to
InboundService.AddInboundClient/DelInboundClient.
ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail
per email instead of trying to coerce AddInboundClient into doing the
update — the old path would have failed duplicate-email validation for
existing clients anyway.
The legacy InboundService.AddInboundClient/UpdateInboundClient/
DelInboundClient methods stay in place; they are now only used internally
by ClientService Create/Update/Delete/Attach. Inlining + deleting them
follows in a separate commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(service): move all client mutation methods to ClientService
Moves the client mutation surface out of InboundService and into
ClientService. These methods all operate on a single client (identity
fields, traffic limits, expiry, ip limit, enable state, telegram tg id)
and didn't belong on the inbound aggregate.
Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient,
DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID,
checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail,
ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail,
ResetClientTrafficLimitByEmail.
Each method now takes an explicit *InboundService for the helpers that
legitimately stay on InboundService (GetInbound, GetClients, runtimeFor,
AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs /
UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs,
GetClientInboundByEmail / GetClientInboundByTrafficID,
GetClientTrafficByEmail).
Stays on InboundService: ResetClientTrafficByEmail and
ResetClientTraffic(id, email) — these mutate xray_client_traffic rows,
not client identity, so they're inbound-side bookkeeping.
Callers updated: tgbot (6 calls), ldap_sync_job (1 call),
InboundService internal (writeBackClientSubID, CopyInboundClients,
AddInbound's email-uniqueness check), ClientService Create/Update/
Delete/Attach/Detach.
Also removes a dead resetAllClientTraffics controller handler whose
route was already gone after the previous /clients API migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): finish migrating to ClientService + tidy IP routes
Two related cleanups in the new /clients surface:
1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic +
last_traffic_reset_time, with node-runtime propagation) from
InboundService to ClientService. PeriodicTrafficResetJob now holds
a clientService and calls
j.clientService.ResetAllClientTraffics(&j.inboundService, id).
The last client-mutation method on InboundService is gone.
2. Shorten redundantly-named routes/handlers under /panel/api/clients:
- /clientIps/:email -> /ips/:email (handler getIps)
- /clearClientIps/:email -> /clearIps/:email (handler clearIps)
The "client" prefix was redundant inside the clients namespace.
Frontend (InboundInfoModal) and api-docs updated to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds,clients): clean up inbound modal + enrich client modal
Inbound modal rework (InboundFormModal.vue + inbound.js):
- Drop the embedded Client subform in the Protocol tab. Multi-inbound
clients are managed exclusively from the Clients page now; a fresh
inbound is created with zero clients (settings constructors default
to []) and the user attaches clients afterwards.
- Hide the Protocol tab entirely when it has nothing to render
(VMESS, Trojan without fallbacks, Hysteria). Auto-switches active
tab to Basic when the tab disappears while focused.
- Move the Security section (Security selector + TLS block with certs
and ECH + Reality block) out of the Stream tab into its own
Security tab, sharing the canEnableStream gate.
Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue):
- Flow select (xtls-rprx-vision / -udp443) appears only when the
panel actually has a Vision-capable inbound (VLESS or PortFallback
on TCP with TLS or Reality). Hidden otherwise, and cleared when
it disappears.
- IP Limit input is disabled when the panel-level ipLimitEnable
setting is off, fetched into useClients alongside subSettings and
threaded through ClientsPage to both modals.
- Edit modal now shows an "IP Log" section listing IPs that have
connected with the client's credentials, with refresh and clear
buttons (calls the renamed /panel/api/clients/ips and /clearIps
endpoints).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(inbounds): drop manual Fallbacks UI from inbound modal
The PortFallback protocol type now covers the common
VLESS-master-plus-children case with auto-wired dests, so the manual
Fallbacks editor (showFallbacks block in the Protocol tab) is mostly
redundant. Removed:
- the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows)
- the showFallbacks computed
- the addFallback / delFallback helpers
- the .fallbacks-header / .fallbacks-title styles
- the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP
no longer shows an empty Protocol tab)
Power users who need a non-inbound fallback dest (nginx, static site)
can still author settings.fallbacks via the Advanced JSON tab.
* feat(clients,inbounds): move search/filter to Clients page + small fixes
Search/filter relocation:
- Remove the search/filter toolbar (search switch + filter radio +
protocol/node selects + the visibleInbounds projection +
inboundsFilterState localStorage + filter CSS + the SearchOutlined/
FilterOutlined/ObjectUtil/Inbound imports it required) from
InboundList. The filters were all client-oriented buckets bolted
onto the inbound row.
- Add a search/filter toolbar to ClientsPage with the same shape:
switch between deep-text search and bucket filter (active /
deactive / depleted / expiring / online) + protocol filter that
matches clients attached to at least one inbound with the chosen
protocol. State persists in clientsFilterState localStorage.
filteredClients drives both the desktop table and the mobile card
list, and select-all / allSelected / someSelected only span the
visible subset.
- useClients now also fetches expireDiff and trafficDiff from
/panel/setting/defaultSettings (used to detect the expiring
bucket); ClientsPage threads them into the client-bucket helper.
Loose fixes folded in:
- Add Client: email field is auto-filled with a random handle on
open, matching uuid/subId/password/auth.
- Inbound clone: parse and reuse the source settings JSON (with
clients reset to []) instead of building a fresh defaulted
Settings, so VLESS Encryption/Decryption and other non-client
fields survive the clone.
- en-US.json: add the ipLog string used by the edit-client modal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): add Reverse tag field for VLESS-attached clients
Mirrors the Flow field's pattern: a Reverse tag input appears in the
Add/Edit Client modal whenever at least one selected inbound is VLESS
or PortFallback. The value rides over the wire as
client.reverse = { tag: '...' } so it lands directly in model.Client's
*ClientReverse field; an empty value omits the reverse key entirely.
On edit the field is hydrated from props.client.reverse?.tag, and the
showReverseTag watcher clears the field if the user drops the last
VLESS-like inbound from the selection.
* fix(xray): emit only protocol-relevant fields per client entry
The Xray config synthesizer was writing every identifier field (id,
password, flow, auth, security/method, reverse) on every client entry
regardless of the inbound's protocol. Xray ignores unknown fields, so
the config worked, but it diverged from the spec and leaked secrets
across protocols when one client was attached to multiple inbounds —
a VLESS inbound's generated config carried the same client's Trojan
password and Hysteria auth alongside its uuid.
Switch on inbound.Protocol when building each entry:
- VLESS / PortFallback: id, flow, reverse
- VMess: id, security
- Trojan: password, flow
- Shadowsocks: password, method
- Hysteria / Hysteria2: auth
email is emitted for every protocol.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): restore auto-disable kick under new schema
disableInvalidClients still resolved (inbound_tag, email) pairs via
JSON_EACH(inbounds.settings.clients), which is empty after migrating
to the clients + client_inbounds tables. Result: xrayApi.RemoveUser
never ran for depleted clients, clients.enable stayed true so the UI
showed them as active, and only xray_client_traffic.enable got flipped
- making "Restart Xray After Auto Disable" only half-work.
Resolve the targets via a JOIN through the new schema, flip clients.enable
so the Clients page reflects the state, and drop the legacy JSON
write-back plus the subId cascade workaround (email is unique now).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): live WebSocket updates + Ended status surfacing
ClientsPage now subscribes to traffic / client_stats / invalidate
WebSocket events instead of polling /onlines every 10s. Per-row
traffic counters refresh in place, online state stays current, and
list-level mutations elsewhere trigger a refresh.
The client roll-up summary moves from InboundsPage to ClientsPage
where it belongs, restructured into six labeled stat tiles
(Total / Online / Ended / Expiring / Disabled / Active) with email
popovers on the ones with issues.
Auto-disabled clients (traffic exhausted or expiry passed) now
classify as 'depleted' even though clients.enable=false, so they
show up under the Ended filter and render a red Ended tag instead
of looking indistinguishable from an operator-disabled row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(nodes): per-node client roll-up and panel version
Added transient inboundCount / clientCount / onlineCount /
depletedCount fields to model.Node, populated by NodeService.GetAll
via aggregated queries (one join across inbounds + client_inbounds,
one over client_traffics intersected with the in-memory online
emails). The Nodes list renders these as colored chips on a new
"Clients" column so an operator can see at a glance how many users
each node carries and how many are currently online or depleted.
Also exposes the remote panel's version. The central panel adds
panelVersion to its /api/server/status payload (sourced from
config.GetVersion). Probe reads that field and persists it on the
node row, mirroring how xrayVersion already flows. NodesPage gets
a new column next to Xray Version, in both desktop and mobile
views, with English and Persian strings.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): stop node sync from resurrecting deleted clients
Several related issues around node-managed clients:
- Remote runtime: drop the per-inbound resetAllClientTraffics path
and point traffic/onlines/lastOnline fetches at the new
/panel/api/clients/* routes.
- Delete from master: always push the updated inbound to the node
even when the client was already disabled or depleted, so the
node actually loses the user instead of silently keeping it.
- setRemoteTraffic: mirror remote clients into the central tables
only on first discovery of a node inbound. Matched inbounds let
the master own the join table, so a stale snap can no longer
re-create a ClientRecord (and join row) for a client that was
just deleted on the master.
- ClientService.Delete: route through submitTrafficWrite so deletes
serialize with node traffic merges, and switch the final
ClientRecord delete to an explicit Where("id = ?") clause.
- setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on
inserts and email-keyed UPDATEs for client_traffics, so mirroring
a snap doesn't trip the unique email index.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(clients): switch client API endpoints from id to email
All client-scoped routes now use the unique email as the path key
(get, update, del, attach, detach, links). Email is the stable,
protocol-independent identifier — UUIDs don't exist for trojan or
shadowsocks, and internal numeric ids leaked panel implementation
detail into the public API.
Removed the redundant /traffic/byId/:id endpoint (covered by
/traffic/:email) and collapsed /links/:id/:email into /links/:email,
which now returns links across every attached inbound for the client.
Frontend selection, bulk delete, and toggle state are now keyed by
email as well, dropping the id→email lookup workaround.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(server): move cached state and helpers into ServerService
ServerController had grown to hold its own status cache, version-list
TTL cache, history-bucket whitelist, and the loop that drove all three
— concerns that belong in the service layer. Pull them out:
- lastStatus + the @2s refresh become ServerService.RefreshStatus and
ServerService.LastStatus; the controller's cron now just orchestrates
the cross-service side effects (xrayMetrics sample, websocket broadcast).
- The 15-minute Xray-versions cache (with stale-on-error fallback) moves
into ServerService.GetXrayVersionsCached, collapsing the controller
handler to a single call.
- The freedom/blackhole outbound-tag walk used by /xraylogs becomes
ServerService.GetDefaultLogOutboundTags.
- The allowed-history-bucket whitelist moves to package-level
service.IsAllowedHistoryBucket, so both NodeController and
ServerController validate against the same list.
Net result: web/controller/server.go drops from 458 to 365 lines and
contains only HTTP wiring + presentation-y side effects.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(api): emit JSON-text columns as nested objects
Inbound, ClientRecord, and InboundClientIps store settings /
streamSettings / sniffing / reverse / ips as JSON-text in the DB. The
API was passing that text through verbatim, so every consumer had to
JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so
the wire format is a real nested object, while still accepting the
legacy escaped-string shape on write. Frontend dbinbound.js gets a
matching coerceInboundJsonField helper for the same dual-shape read
path, and inbound.js toJson stops emitting empty/placeholder fields
(externalProxy [], sniffing destOverride when disabled, etc.) so the
new normalised JSON stays terse. api-docs and the inbound-clone path
are updated to the new shape. Controller route lists are regrouped so
all GETs sit above POSTs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): include inboundIds and traffic in /clients/list
ClientRecord got its own MarshalJSON in the previous commit, and
ClientWithAttachments embeds it to add inboundIds and traffic. Go
promotes the embedded MarshalJSON to the outer struct, so the encoder
was calling ClientRecord.MarshalJSON for the whole value and silently
dropping the extras. The frontend reads row.inboundIds / row.traffic
from /clients/list, so attached inbounds didn't render and newly added
clients looked like they hadn't saved. Add an explicit MarshalJSON on
ClientWithAttachments that splices the extras in.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown
Legacy panel hid the IP Log section when access logging was off; the
Vue 3 migration left it gated on isEdit only, so the section showed
even when xray's access log was 'none' and nothing was being recorded.
Restore the ipLimitEnable gate on the edit modal's IP Log form-item.
While here, clean up the Xray Settings access-log dropdown: previously
two 'none' entries appeared (an empty value labelled with t('none') and
the literal 'none' from the options array). Drop the empty option for
access log (the literal 'none' covers it) and relabel the empty option
for error log / mask address to t('empty') so they're distinguishable.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(nodes): route per-client ops through node clients API + orphan sweep
Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master
mutates clients on a node via /panel/api/clients/{add,update,del} rather
than pushing the whole inbound. The previous rt.UpdateInbound path made
the node DelInbound+AddInbound on every single-client change, briefly
cycling every other user on the same inbound.
DelInbound no longer filters by enable=true, so a disabled node inbound
actually gets removed from the node instead of being resurrected by the
next snap.
setRemoteTrafficLocked now sweeps any ClientRecord with zero
ClientInbound rows after SyncInbound rebuilds the attachments, which is
how a node-side delete propagates back to master instead of leaving a
detached ghost. ClientService.Delete tombstones the email first so a
snap arriving mid-delete can't re-create the record.
WebSocket broadcasts an "invalidate(clients)" message on every client
mutation so the Clients page refreshes without manual reload.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin
Drops the random/roundRobin gate on the Fallback field in
BalancerFormModal so every strategy can pick a fallback outbound.
syncObservatories now feeds burstObservatory from leastLoad +
random + roundRobin balancers (was leastLoad only), matching how
leastPing feeds observatory.
Fix the JsonEditor "Unexpected end of JSON input" that appeared
when switching a balancer between leastPing and another strategy:
the obsView watcher was gated on showObsEditor (a boolean OR of
the two flags) and missed the case where one observatory
swapped for the other in the same tick. Watch the individual
flags instead so obsView flips to the surviving editor and the
getter stops pointing at a deleted key.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): use sortedInbounds for mobile empty-state check
InboundList referenced an undefined visibleInbounds in the mobile
card list's empty-state guard, throwing "Cannot read properties of
undefined (reading 'length')" and breaking the entire mobile render.
* feat(clients): sortable table columns
Adds the same sortState / sortableCol / sortFns pattern InboundList
uses, wrapping filteredClients in sortedClients so sort composes with
the existing search/filter pipeline. Sortable: enable, email,
inboundIds (attachment count), traffic, remaining, expiryTime;
actions and online stay unsorted.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers
The Add Client flow on shadowsocks inbounds was producing xray configs
that failed to start:
- 2022-blake3-* ciphers need a base64-encoded key of an exact byte
length per cipher. fillProtocolDefaults was assigning a uuid-style
string, which xray rejects as "bad key". Now the password is
generated (or replaced if invalid) via random.Base64Bytes(n) sized
to the chosen cipher.
- Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a
per-client method field in multi-user mode; model.Client has no
Method, so settings.clients was stored without one and xray failed
with "unsupported cipher method:". applyShadowsocksClientMethod
now injects the top-level method into each client on add/update,
and healShadowsocksClientMethods backfills it at xray-config-build
time so existing inbounds heal on the next start.
- xray/api.go ssCipherType switch was missing aes-256-gcm, which
fell through to ss2022 path.
- SSMethods dropdown now offers aes-256-gcm.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols
Replace the global orphan sweep in setRemoteTrafficLocked with a
per-inbound diff cleanup: only delete a ClientRecord whose email
disappeared from a snap-tracked inbound (i.e. a node-side delete).
Inbounds that vanished entirely from the snap (e.g. admin deleted
the inbound on master) aren't iterated, so a client whose last
attachment came from that inbound is now left alone instead of
being deleted alongside the inbound.
ClientFormModal and ClientBulkAddModal now filter the Attached
inbounds dropdown to protocols that actually support multiple
clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2,
and portfallback (which routes through VLESS settings).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): make empty-state text readable on dark/ultra themes
The "No clients yet" empty state had a hardcoded black color
(rgba(0,0,0,0.45)) that vanished against the dark backgrounds.
Drop the inline color, let it inherit from the AntD theme, and
fade with opacity like the mobile card empty state already does.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options
- tgbot: drop legacy per-protocol Add Client UI in favour of a client-first
multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker
let an admin pick one or more inbounds and submit a single client; per-
protocol secrets are now generated server-side via fillProtocolDefaults.
Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases
and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a
setTGUser button + awaiting_tg_id state so the bot can set Client.TgID
during Add.
- clients UI: add Telegram user ID input to ClientFormModal (0 = none).
Hide IP Limit field entirely when ipLimitEnable is off — disabled fields
still take layout space, this collapses Auth(Hysteria) to full width.
- inbounds API: new GET /panel/api/inbounds/options that returns just
{id, remark, protocol, port, tlsFlowCapable}. Used by the clients page
pickers so the dropdown payload stays small on panels with thousands of
clients (drops settings JSON, clientStats, streamSettings). Server-side
TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer
needs to parse streamSettings client-side.
- clientInfoMsg now shows attached inbound remarks, and getInboundUsages
reports the attached client count per inbound.
- api-docs: document the new /options endpoint and add tgId / flow to the
clients add/update bodies.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(inbounds): keep Node column visible for node-attached inbounds
The Node column was bound to hasActiveNode, so disabling every node hid
the column even when inbounds were still attached to those nodes — the
admin lost the visual cue that those inbounds belonged to a node and
would come back when it was re-enabled. Combine hasActiveNode with a
new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so
the column survives node-disable.
* fix(api-docs): accept functional-component icons in EndpointSection
AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional
components, so the icon prop's type: Object validator was rejecting
them with a "Expected Object, got Function" warning at runtime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service
Adds ~110 unit tests across previously untested packages. Focus on
pure-logic and concurrency surfaces where regressions would silently
affect users:
- util/crypto, util/random: password hashing round-trip, ss2022 key
generation, alphabet/length invariants.
- util/netsafe: IsBlockedIP edge cases, NormalizeHost validation,
SSRF guard with AllowPrivate context bypass.
- util/common, util/json_util: traffic formatter, Combine nil-skip,
RawMessage empty-as-null and copy-on-unmarshal.
- sub: splitLinkLines, searchKey/searchHost, kcp share fields,
finalmask normalization, buildVmessLink round-trip.
- xray: Config.Equals and InboundConfig.Equals field-by-field,
getRequiredUserString/getOptionalUserString type checks.
- web/websocket: hub registration, throttling, slow-client eviction,
nil-receiver safety, concurrent register/unregister.
- web/service: NodeService.normalize validation, normalizeBasePath,
HeartbeatPatch.ToUI mapping.
- web/job: atomicBool concurrent set/takeAndReset semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n(clients): replace English fallbacks with proper translation keys
Pulls every hard-coded English label/title in the Clients page and its
four modals through the i18n layer so localized panels stop leaking
English. New keys live under pages.clients (auth, hysteriaAuth, uuid,
flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId,
telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the
root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure
toasts. Also switches the add-client modal's primary button from "Add"
to "Create" for consistency with other create flows.
The bulk-add Random/Random+Prefix/... email-method options stay
hard-coded by request - they're identifier-shaped strings.
* i18n: backfill 99 missing keys across all 12 non-English locales
Brings every translation file up to parity with en-US.json so the
Clients page, the fallback-children inbound section, the new refresh
verb, the Nodes panel-version label and a handful of older holes stop
falling through to the English fallback. New strings span:
- pages.clients.* (labels, confirmations, toasts, emailMethods)
- pages.inbounds.portFallback.* (Reality fallback inbound section)
- pages.nodes.panelVersion, menu.clients, refresh
Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally
left untranslated since they correspond to xray-core field names.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* i18n: drop stale pages.client block duplicated in every non-English locale
Every non-English locale carried a pages.client (singular) section with
30 entries that duplicated pages.clients (plural). The plural namespace
is what the Vue code actually consumes; the singular one was dead
weight from an older rename that never got cleaned up in the
non-English files. Removing it brings every locale to exactly 984
keys, matching en-US.json.
* chore: apply modernize analyzer fixes across codebase
Mechanical replacements suggested by golang.org/x/tools/.../modernize:
strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(),
range-over-int, new(expr), strings.Builder for hot += loops,
reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines.
* feat(database): add PostgreSQL as an optional backend alongside SQLite
Lets operators with large client counts or multi-node setups pick PostgreSQL
at install time without breaking the existing SQLite default. Backend is
selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps
the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db`
subcommand copies SQLite data into PostgreSQL in FK-aware order.
* fix(inbounds): gate node selector to multi-node-capable protocols
Hide the Deploy-To selector and clear nodeId when switching to a
protocol that can't run on a remote node. Also:
- subs: return 404 (not 400) when subId matches no inbounds, so VPN
clients distinguish "deleted/unknown" from a server error
- hysteria link gen: use the inbound's resolved address so node-managed
inbounds advertise the node host instead of the central panel
- shadowsocks: default network to 'tcp' (udp was causing issues for some
clients on first-create)
- vite dev proxy: rewrite migrated-route bypass against the live base
path instead of a hardcoded single-segment regex
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form
Bulk add/delete were serial on the frontend (one toast per call, N round-trips)
and the backend race exposed by parallelizing them lost client attachments and
hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also
had no Start-After-First-Use option, and the table never showed the delayed
duration.
Backend (web/service/client.go):
- Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on
the same inbound don't lose the read-modify-write of settings JSON.
- SyncInbound skips create+join when the email is tombstoned so a concurrent
maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn-
Settings) that did a stale RMW can't resurrect a just-deleted client with a
fresh id.
- compactOrphans sweeps settings.clients entries whose ClientRecord no longer
exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each
user-initiated mutation self-heals the inbound's settings.
- DelInboundClient uses Pluck instead of First for the stats lookup so a
missing row doesn't abort the delete with a noisy ErrRecordNotFound log.
Frontend:
- HttpUtil.{get,post} accept a silent option that suppresses the auto-toast.
- ClientBulkAddModal fires creates in parallel + silent + one summary toast.
- useClients.removeMany runs deletes in parallel + silent and refreshes once;
ClientsPage bulk delete uses it and shows one aggregate toast.
- useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket
invalidate events from the backend collapses into a single refresh.
- ClientsPage pagination is reactive (paginationState ref + tablePagination
computed); onTableChange persists page-size and page changes.
- ClientFormModal gains a Start-After-First-Use switch + Duration days input
alongside the existing Expiry Date picker; on edit-mode open a negative
expiryTime is decoded back to delayed mode + days; on submit the payload
sends -86400000 * days or the absolute timestamp.
- ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip
Start After First Use: Nd) instead of infinity.
- Telegram ID field in the form is hidden when /panel/setting/defaultSettings
reports tgBotEnable=false; Comment then fills the row.
- Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4)
when ipLimitEnable is on, else UUID + Total GB at 12/12.
- useInbounds.rollupClients counts only clients with a matching clientStats
row, so orphans in settings.clients no longer inflate the inbound's count.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(windows): clean shutdown, working panel restart, harden kernel32 load
Three Windows-specific issues addressed:
1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's
"Stop" sends TerminateProcess to the Go binary, which is uncatchable
— our signal handlers never run, so xrayService.StopXray() is skipped
and xray is left dangling. Spawn xray as a child of a Job Object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our
handle to the job is closed (which happens even on TerminateProcess).
Also trap os.Interrupt in main so Ctrl+C in the terminal runs the
graceful path.
2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not
supported by windows" because Windows can't deliver arbitrary signals.
Add a restart hook in web/global; main registers it to push SIGHUP
into its own signal channel, and RestartPanel calls the hook before
falling back to the (Unix-only) signal path. Same restart-loop code
runs in both cases.
3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the
kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents
DLL hijacking by a planted DLL next to the binary). Local filetime
type replaced with windows.Filetime, and the unreliable
syscall.GetLastError() fallback replaced with a type assertion on the
errno captured at call time.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(sys): correct CPU/connection accounting on linux + darwin
util/sys/sys_linux.go:
- GetTCPCount/GetUDPCount were counting the column header row in
/proc/net/{tcp,udp}[6] as a connection, inflating the reported total
by 1 per non-empty file (so the panel status line always showed 2
more connections than actually existed). Replace getLinesNum +
safeGetLinesNum with a single bufio.Scanner-based countConnections
that skips the header.
- CPUPercentRaw now opens HostProc("stat") instead of a hardcoded
/proc/stat so HOST_PROC overrides apply, matching the connection
counters in the same file.
- Simplify CPU field unpacking: pad nums to 8 once instead of guarding
every assignment with a len check.
util/sys/sys_darwin.go:
- Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order
is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's
cpu_darwin_nocgo.go reads the same layout. The previous code used
out[3] as idle and out[4] as intr, so busy = total - dIdle was
actually subtracting interrupt time, making the panel report CPU
usage close to 100% on macOS regardless of actual load.
- Collapse the per-field delta math into a single loop.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(xray): rotate crash reports into log folder, prevent overwrites
writeCrashReport had two flaws: it wrote to the bin folder (alongside the
xray binary) which conflates artifacts, and the second-precision timestamp
meant a tight restart-loop crash burst overwrote prior reports. Write to
the log folder with nanosecond precision and keep the last 10 reports.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* revert(inbounds): drop unreleased portfallback protocol
The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a
standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS
inbound, the way Xray models them natively. Rip out the entire feature
cleanly (no migration needed since it was never released): protocol
constant, fallback children DB table, FallbackService, 2 API endpoints,
all UI rows, related translations and api-docs. A native fallback flow
attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links
A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a
fallback master: pick existing inbounds as children and the panel auto-
fills the SNI / ALPN / path / xver routing fields from each child's
transport, auto-builds settings.fallbacks at config-gen time, and
rewrites the child's client-share link so it advertises the master's
reachable endpoint and TLS state instead of the child's loopback listen.
Layout matches the Xray All-in-One Nginx example: master at :443 with
clients + TLS, each child on 127.0.0.1 with its own transport+clients.
Order matters (Xray walks fallbacks top-to-bottom) — reorder via the
per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row
Edit toggle for the rare cases where the auto-derivation needs
overriding; otherwise just pick a child and you're done.
Backend: new InboundFallback table + FallbackService (GetByMaster /
SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes
(GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig
injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality
inbound; GetInbounds annotates each child with FallbackParent so the
frontend can rewrite links without an extra round-trip.
Link projection covers every emission path — clients-page QR/links,
per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the
inbounds-page link/info/QR — via a shared projectThroughFallbackMaster
on the backend and a shared projectChildThroughMaster on the frontend
that both handle the panel-tracked relationship and the legacy
unix-socket (@vless-ws) convention.
Strings translated into all 12 non-English locales.
* docs: rewrite CONTRIBUTING with full local-dev setup
The prior three-line CONTRIBUTING left newcomers guessing at every
non-trivial step: which Go / Node versions, where xray comes from, why
the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue
multi-page setup is wired, what to do on Windows when go build trips
on the CGo SQLite driver.
Now covers prerequisites, MinGW-w64 install on Windows (niXman builds
or MSYS2), one-shot first-time setup, two frontend dev workflows with
the XUI_DEBUG asset-cache gotcha called out, the architecture and
conventions of the Vue side, a project-layout map, useful env vars,
and the PR checklist.
---------
2026-05-19 03:16:42 -07:00
|
|
|
}
|
feat(clients,groups): client groups + sub-links export + dedicated groups page
Persistent client groups
- New ClientGroup model + client_groups table that holds empty
(placeholder) groups so a user can define a label before any client
references it. ListGroups merges these with the distinct group_name
values already stored on clients and reports {name, clientCount}.
- ClientRecord gains group_name column; the model.Client wire shape
gains a matching `group` JSON field that survives the
inbound.settings → SyncInbound round-trip.
- Rename/Delete on a group mutates client_groups (rename row / delete
row) AND propagates to all matching clients in ClientRecord and in
every owning inbound's settings JSON, all in one transaction.
Bulk operations
- AssignGroup(emails, group) updates clients.group_name + patches each
affected inbound's settings JSON in one read-modify-write per inbound.
Empty group clears the label. Auto-creates the client_groups row when
the user assigns to a brand-new name.
- BulkResetTraffic(emails) loops the existing single-reset path so the
caller can zero traffic across a whole selection or a whole group.
- EmailsByGroup(name) returns just the email list (used by the groups
page to fan a single bulk action over every member).
Endpoints (all under /panel/api/clients)
- GET /groups — summaries with counts
- GET /groups/:name/emails — emails in a group
- POST /groups/create — empty placeholder group
- POST /groups/rename — rename (table + clients + JSON)
- POST /groups/delete — drop label everywhere (clients survive)
- POST /bulkAssignGroup — assign N selected clients
- POST /bulkResetTraffic — reset traffic on a list
Clients page UX
- New Group column (Actions → Client → Group → Inbounds → …) with a
click-to-filter chip.
- FilterDrawer gains a multi-select Group filter whose options come
from the new ClientPageResponse.groups field (sourced from ListGroups
so empty/placeholder groups are pickable too).
- Single-client and bulk-add forms gain a Group AutoComplete pre-loaded
with all known group names.
- New toolbar buttons when selection > 0: "Group ({n})" opens
BulkAssignGroupModal, "Sub links ({n})" opens SubLinksModal.
Sub-links export modal (new SubLinksModal.tsx)
- Table of selected clients with their subscription URL (and JSON URL
when subJsonEnable is on), per-row copy, Copy all, and Download as
sub-links-<timestamp>.txt. Warns when subscription is disabled or
none of the selected clients have a subId.
Dedicated Groups page (new pages/groups/GroupsPage.tsx)
- /groups route + sidebar entry (TagsOutlined icon) + page title key.
- Card-based layout matching Clients/Inbounds/Nodes — summary card with
Total/Grouped/Empty stats, main card with Add Group button + table.
- Per-row More dropdown (icon-first column on the left): Sub links,
Adjust (days+traffic), Reset traffic, Rename, Delete clients in
group, Delete group (keep clients). Empty groups disable the
client-targeted actions.
- Reuses SubLinksModal and ClientBulkAdjustModal — emails for the
group are fetched on demand from GET /groups/:name/emails.
Other polish
- /groups + groups-page selectors added to page-shell.css and
page-cards.css so the new page inherits the same background, padding,
card borders, hover shadow, and summary-card padding.
- .card-toolbar gains a small vertical padding so the larger toolbar
buttons (now default size, matching Inbounds) don't crowd the top of
the card-head on Clients and Groups pages.
2026-05-27 08:30:55 -07:00
|
|
|
|
|
|
|
|
type bulkResetRequest struct {
|
|
|
|
|
Emails []string `json:"emails"`
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (a *ClientController) bulkResetTraffic(c *gin.Context) {
|
|
|
|
|
var req bulkResetRequest
|
|
|
|
|
if err := c.ShouldBindJSON(&req); err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
affected, err := a.clientService.BulkResetTraffic(&a.inboundService, req.Emails)
|
|
|
|
|
if err != nil {
|
|
|
|
|
jsonMsg(c, I18nWeb(c, "somethingWentWrong"), err)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
jsonObj(c, gin.H{"affected": affected}, nil)
|
|
|
|
|
a.xrayService.SetToNeedRestart()
|
|
|
|
|
notifyClientsChanged()
|
|
|
|
|
}
|