3x-ui/go.mod

120 lines
5.2 KiB
Modula-2
Raw Normal View History

2026-05-09 17:13:42 -07:00
module github.com/mhsanaei/3x-ui/v3
2023-02-09 11:18:06 -08:00
go 1.27.1
2023-02-09 11:18:06 -08:00
require (
github.com/amnezia-vpn/amneziawg-go/v3 v3.1.20260828
feat(tuic): implement native in-process Go TUIC v5 server (#6577) * feat(tuic): implement native in-process Go TUIC v5 server - Implement native TUIC v5 protocol server on pure Go using quic-go - Bridge decrypted TCP/UDP traffic into Xray-core via loopback SOCKS5 inbound - Support full Xray routing rules (geosite/geoip) and cascading outbounds - Implement atomic per-client traffic accounting with TotalGB and ExpiryTime - Add automatic legacy cleanup for older Rust tuic-server binaries, configs, and orphaned processes - Eliminate external Rust tuic-server downloads from install/CI scripts * fix(tuic): address traffic accounting, client reload, and socket lifecycle issues * fix(service): update checkTuicSocksReverseConflict to use bindAddr for listenOverlaps * fix(tuic): resolve traffic double-accounting, UDP fragmentation, and socket lifecycle issues * feat(tuic): complete native Go integration and address audit findings - Integrate an isolated QUIC fork pinned to a specific commit - Preserve original QUIC dependencies for Xray, Hysteria and Gin - Apply BBR, CUBIC and Reno to server connections and exported client profiles - Bridge Xray BBR with correct monotonic time and congestion type conversions - Handle congestion sender recreation after PMTU changes - Update congestion control for new connections without restarting the listener - Preserve existing connections and their selected congestion controller - Apply per-inbound log levels through the shared panel logger - Add lifecycle, authentication and TCP/UDP relay events without exposing secrets - Rate-limit repeated authentication and relay warnings - Support native and QUIC UDP relay modes on the same listener - Recover UDP associations after relay worker failures - Fix TCP relay cancellation, idle shutdown and half-close handling - Close active sessions when client credentials are revoked or disabled - Track traffic by immutable client statistics IDs across email and UUID changes - Prevent ambiguous accounting and duplicate UUIDs within TUIC inbounds - Persist pending traffic in a durable shutdown journal - Replay journal batches transactionally without duplicate accounting - Report server shutdown failures through the shared logger - Preserve legacy flat and nested TUIC settings compatibility - Normalize congestion controller values consistently across backend and frontend - Preserve controller, UDP mode and SNI in client links and subscriptions - Separate client profile options from server settings in the TUIC form - Keep certificate path autofill explicit when changing client SNI - Align UDP packet size validation with protocol limits - Simplify and localize TUIC field hints and certificate autofill messages - Add controller, TCP/UDP, logging and live settings update tests - Add accounting identity, journal replay and shutdown regression tests - Add relay recovery, session revocation and legacy frontend form tests * fix(service): alias the TUIC duplicate-UUID subquery for PostgreSQL < 16 syncInboundClients runs a COUNT(*) FROM (subquery) for every client sync, whatever the protocol. PostgreSQL before 16 rejects a FROM subquery with no alias, so on the distro PostgreSQL install.sh provisions (14 on Ubuntu 22.04, 15 on Debian 12) every client add or edit failed with SQLSTATE 42601. Reproduced against postgres:15 with the new env-gated test. * fix(database): create tuic_traffic_receipts through the model migration AddTuicTrafficBatch issued CREATE TABLE IF NOT EXISTS at runtime, a schema change outside db.go. The table was invisible to allModels and migrationModels, so x-ui migrate-db dropped the receipts and a retained journal could be counted twice after a SQLite to PostgreSQL move. It is now a GORM model in both lists, and the insert uses OnConflict DoNothing. * chore(tuic): skip the ICMP-dependent relay test on Windows, drop dead collectors Go disables SIO_UDP_CONNRESET on Windows, so a dead UDP bridge never fails a read there and TestAudit3UDPAssociationMustRecoverAfterBridgeReadFailure was red on every Windows run. Server.CollectTotalTraffic and Manager.CollectTraffic had no caller. * refactor(tuic): serve TUIC on apernet/quic-go instead of a personal fork The native server depended on github.com/poise52/quic-go, a personal fork of apernet/quic-go patched only to pick the congestion controller before the handshake. That put a second QUIC/TLS stack in the binary that no upstream security fix reaches. apernet/quic-go is already in the graph through xray-core and exposes SetCongestionControl, so BBR is now installed on each accepted connection with Xray's own congestion.UseBBR; the cross-module BBR adapter is gone. apernet ships New Reno as its only built-in sender, so a cubic setting is served as new_reno server-side (clients still get cubic in their profile). The test inspectors now read the sender under congestionMutex, which the post-handshake install writes under. Linux loopback, single stream through Xray: 2428 -> 3383 Mbit/s (bbr). --------- Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
2026-10-02 17:56:02 -07:00
github.com/apernet/quic-go v0.61.1-0.20260806010916-184d081eef3e
github.com/gin-contrib/gzip v1.2.8
github.com/gin-contrib/sessions v1.1.2
2026-03-04 04:05:29 -08:00
github.com/gin-gonic/gin v1.12.0
github.com/go-ldap/ldap/v3 v3.4.14
github.com/go-playground/validator/v10 v10.30.5
github.com/goccy/go-json v0.11.2
feat add clash yaml convert (#3916) * docs(agents): add AI agent guidance documentation * feat(sub): add Clash/Mihomo YAML subscription service Add SubClashService to convert subscription links to Clash/Mihomo YAML format for direct client compatibility. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * feat(sub): integrate Clash YAML endpoint into subscription system - Add Clash route handler in SUBController - Update BuildURLs to include Clash URL - Pass Clash settings through subscription pipeline Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * feat(web): add Clash settings to entity and service - Add SubClashEnable, SubClashPath, SubClashURI fields - Add getter methods for Clash configuration - Set default Clash path to /clash/ and enable by default Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * feat(ui): add Clash settings to subscription panels - Add Clash enable switch in general subscription settings - Add Clash path/URI configuration in formats panel - Display Clash QR code on subscription page - Rename JSON tab to "Formats" for clarity Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * feat(js): add Clash support to frontend models - Add subClashEnable, subClashPath, subClashURI to AllSetting - Generate and display Clash QR code on subscription page - Handle Clash URL in subscription data binding Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix --------- Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
2026-04-19 13:26:13 -07:00
github.com/goccy/go-yaml v1.19.2
github.com/google/uuid v1.6.0
feat: Add WebSocket support for real-time updates and enhance VLESS settings (#3605) * feat: add support for trusted X-Forwarded-For and testseed parameters in VLESS settings * chore: update Xray Core version to 25.12.8 in release workflow * chore: update Xray Core version to 25.12.8 in Docker initialization script * chore: bump version to 2.8.6 and add watcher for security changes in inbound modal * refactor: remove default and random seed buttons from outbound form * refactor: update VLESS form to rename 'Test Seed' to 'Vision Seed' and change button functionality for seed generation * refactor: enhance TLS settings form layout with improved button styling and spacing * feat: integrate WebSocket support for real-time updates on inbounds and Xray service status * chore: downgrade version to 2.8.5 * refactor: translate comments to English * fix: ensure testseed is initialized correctly for VLESS protocol and improve client handling in inbound modal * refactor: simplify VLESS divider condition by removing unnecessary flow checks * fix: add fallback date formatting for cases when IntlUtil is not available * refactor: simplify WebSocket message handling by removing batching and ensuring individual message delivery * refactor: disable WebSocket notifications in inbound and index HTML files * refactor: enhance VLESS testseed initialization and button functionality in inbound modal * fix: * refactor: ensure proper WebSocket URL construction by normalizing basePath * fix: * fix: * fix: * refactor: update testseed methods for improved reactivity and binding in VLESS form * logger info to debug --------- Co-authored-by: lolka1333 <test123@gmail.com>
2026-01-02 20:26:00 -08:00
github.com/gorilla/websocket v1.5.3
github.com/jackc/pgx/v5 v5.11.0
2025-05-17 03:33:22 -07:00
github.com/joho/godotenv v1.5.1
github.com/klauspost/compress v1.20.1
github.com/mattn/go-sqlite3 v1.14.52
github.com/mymmrac/telego v1.12.1
2026-01-02 20:36:05 -08:00
github.com/nicksnyder/go-i18n/v2 v2.6.1
2023-02-09 11:18:06 -08:00
github.com/op/go-logging v0.0.0-20160315200505-970db520ece7
feat(tuic): implement native in-process Go TUIC v5 server (#6577) * feat(tuic): implement native in-process Go TUIC v5 server - Implement native TUIC v5 protocol server on pure Go using quic-go - Bridge decrypted TCP/UDP traffic into Xray-core via loopback SOCKS5 inbound - Support full Xray routing rules (geosite/geoip) and cascading outbounds - Implement atomic per-client traffic accounting with TotalGB and ExpiryTime - Add automatic legacy cleanup for older Rust tuic-server binaries, configs, and orphaned processes - Eliminate external Rust tuic-server downloads from install/CI scripts * fix(tuic): address traffic accounting, client reload, and socket lifecycle issues * fix(service): update checkTuicSocksReverseConflict to use bindAddr for listenOverlaps * fix(tuic): resolve traffic double-accounting, UDP fragmentation, and socket lifecycle issues * feat(tuic): complete native Go integration and address audit findings - Integrate an isolated QUIC fork pinned to a specific commit - Preserve original QUIC dependencies for Xray, Hysteria and Gin - Apply BBR, CUBIC and Reno to server connections and exported client profiles - Bridge Xray BBR with correct monotonic time and congestion type conversions - Handle congestion sender recreation after PMTU changes - Update congestion control for new connections without restarting the listener - Preserve existing connections and their selected congestion controller - Apply per-inbound log levels through the shared panel logger - Add lifecycle, authentication and TCP/UDP relay events without exposing secrets - Rate-limit repeated authentication and relay warnings - Support native and QUIC UDP relay modes on the same listener - Recover UDP associations after relay worker failures - Fix TCP relay cancellation, idle shutdown and half-close handling - Close active sessions when client credentials are revoked or disabled - Track traffic by immutable client statistics IDs across email and UUID changes - Prevent ambiguous accounting and duplicate UUIDs within TUIC inbounds - Persist pending traffic in a durable shutdown journal - Replay journal batches transactionally without duplicate accounting - Report server shutdown failures through the shared logger - Preserve legacy flat and nested TUIC settings compatibility - Normalize congestion controller values consistently across backend and frontend - Preserve controller, UDP mode and SNI in client links and subscriptions - Separate client profile options from server settings in the TUIC form - Keep certificate path autofill explicit when changing client SNI - Align UDP packet size validation with protocol limits - Simplify and localize TUIC field hints and certificate autofill messages - Add controller, TCP/UDP, logging and live settings update tests - Add accounting identity, journal replay and shutdown regression tests - Add relay recovery, session revocation and legacy frontend form tests * fix(service): alias the TUIC duplicate-UUID subquery for PostgreSQL < 16 syncInboundClients runs a COUNT(*) FROM (subquery) for every client sync, whatever the protocol. PostgreSQL before 16 rejects a FROM subquery with no alias, so on the distro PostgreSQL install.sh provisions (14 on Ubuntu 22.04, 15 on Debian 12) every client add or edit failed with SQLSTATE 42601. Reproduced against postgres:15 with the new env-gated test. * fix(database): create tuic_traffic_receipts through the model migration AddTuicTrafficBatch issued CREATE TABLE IF NOT EXISTS at runtime, a schema change outside db.go. The table was invisible to allModels and migrationModels, so x-ui migrate-db dropped the receipts and a retained journal could be counted twice after a SQLite to PostgreSQL move. It is now a GORM model in both lists, and the insert uses OnConflict DoNothing. * chore(tuic): skip the ICMP-dependent relay test on Windows, drop dead collectors Go disables SIO_UDP_CONNRESET on Windows, so a dead UDP bridge never fails a read there and TestAudit3UDPAssociationMustRecoverAfterBridgeReadFailure was red on every Windows run. Server.CollectTotalTraffic and Manager.CollectTraffic had no caller. * refactor(tuic): serve TUIC on apernet/quic-go instead of a personal fork The native server depended on github.com/poise52/quic-go, a personal fork of apernet/quic-go patched only to pick the congestion controller before the handshake. That put a second QUIC/TLS stack in the binary that no upstream security fix reaches. apernet/quic-go is already in the graph through xray-core and exposes SetCongestionControl, so BBR is now installed on each accepted connection with Xray's own congestion.UseBBR; the cross-module BBR adapter is gone. apernet ships New Reno as its only built-in sender, so a cubic setting is served as new_reno server-side (clients still get cubic in their profile). The test inspectors now read the sender under congestionMutex, which the post-handshake install writes under. Linux loopback, single stream through Xray: 2428 -> 3383 Mbit/s (bbr). --------- Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
2026-10-02 17:56:02 -07:00
github.com/quic-go/quic-go v0.63.0
github.com/refraction-networking/utls v1.8.3-0.20260301010127-aa6edf4b11af
2023-02-09 11:18:06 -08:00
github.com/robfig/cron/v3 v3.0.1
github.com/shirou/gopsutil/v4 v4.26.9
2025-09-14 10:51:57 -07:00
github.com/skip2/go-qrcode v0.0.0-20200617195104-da1b6568686e
github.com/valyala/fasthttp v1.75.0
github.com/xlzd/gotp v0.1.0
feat(xray): update xray-core to v26.9.30 and adapt panel Bump xtls/xray-core to b26a91de4f (v26.9.30) and the three binary pins (DockerInit.sh, release.yml Linux + Windows) in lockstep. No deleted symbols; the sing and sing-shadowsocks indirect deps drop out with the SS2022 rewrite. XDNS finalmask (#6718) replaced its string lists with objects: domains are {name, types, edns0, lenLimit, labelLimit} and client resolvers {type, settings.addr}. The loader no longer parses the old lists, so a single stored xdns mask keeps the whole core from starting. The new leaf package internal/util/maskcompat converts them: "name[:type]" becomes a domain and "name[:type]+udp://addr" a domain plus a udp resolver. A bare name maps to TXT, the type legacy clients queried by default, and each converted domain keeps the 1232-byte EDNS0 the old code always used (without it the server caps answers at 512). It runs from: - the XdnsFinalmaskObjectsFix seeder, over inbound streams, hosts, the xray template, the global sub-JSON mask and cached subscription outbounds; - inbound save (normalizeStreamSettings) and GetXrayConfig, for rows that never went through the seeder; - both link importers, since fm= from an older panel carries the lists. The finalmask form edits the object shape (every key needs a registered field, or the finalmask watch drops it on save) and lifts legacy masks on open. The udp-mask golden fixture moves to the object shape, which TestGoldenStreamFixturesBuildInXray now builds through the core. The wire format changed as well, so pre-upgrade clients need the new core. WireGuard outbound (#6771) dropped settings.domainStrategy and the remoteDNS "local" mode. The endpoint lookup now follows sockopt.domainStrategy and in-tunnel targets the outbound's targetStrategy. The old key is silently ignored, which undid the IPv4-first endpoint lookup the WARP outbound depends on (#5205), and "local" now panics the core at startup because remoteDNS goes through netip.MustParseAddr. The WireguardDomainStrategyFix seeder moves a stored family preference to both keys (a value already set wins) and turns "local" into targetStrategy; the outbound form lifts legacy rows the same way and drops its select, the WARP modal writes the new placement, and the inbound form loses a field the server never read. ValidateOutboundConfig now refuses a non-IP remoteDNS entry, which conf.Build() lets through, on template save and for outbound subscriptions. Noise finalmask items accept type "exp" (#6862), a tag expression. The form offers it for noise items only: header-custom items go through the core's PraseByteSlice, which refuses it. TUN gained autoSystemDnsToGateway (Linux) and autoSystemWfpBlockLeak (Windows). Both pass through the settings schema so a value set in JSON survives the next form save. MASQUE (inbound, outbound, transport) and the XDRIVE transport are new protocols the panel does not offer yet; their new loader refusals only cover configs the panel never generates. The FakeDNS IPv6 pool default, the SS2022 rewrite (same gRPC account; emails are now deduped case-insensitively, as the panel already does), the restored udphop interval default and the rest change no panel-facing config.
2026-09-30 08:27:10 -07:00
github.com/xtls/xray-core v1.260327.1-0.20260930074004-b26a91de4f32
go.uber.org/atomic v1.12.0
golang.org/x/crypto v0.57.0
golang.org/x/net v0.59.0
golang.org/x/sys v0.48.0
golang.org/x/text v0.42.0
google.golang.org/grpc v1.86.0-dev
google.golang.org/protobuf v1.36.12
gopkg.in/natefinch/lumberjack.v2 v2.2.1
gorm.io/driver/postgres v1.6.3
2025-07-02 02:17:26 -07:00
gorm.io/driver/sqlite v1.6.0
gorm.io/gorm v1.31.2
feat(amneziawg): add native AmneziaWG protocol support (#6105) * feat(amneziawg): add native AmneziaWG protocol backend AmneziaWG (WireGuard plus DPI-resistant obfuscation) needs no Docker here — it runs as a genuine kernel interface via awg-quick/awg, managed the same way internal/mtproto manages mtg: one Inbound row is one desired Instance, and a Manager reconciles running interfaces toward the database every 10s (internal/web/job/amneziawg_job.go) plus immediately after a client edit (applyLocalAmneziaWG). Clients reuse model.Client verbatim (the same PrivateKey/PublicKey/ PreSharedKey/AllowedIPs fields WireGuard already uses), so bulk operations, the QR/share-link modal and subscriptions come from the shared inbound infrastructure instead of a parallel implementation. internal/amneziawg owns the obfuscation param generator/validator (ported from coinman-dev/3ax-ui, upgraded to AmneziaWG 2.0's S3/S4 padding and I1 signature packet) and the exec wrapper around awg-quick/awg, with fingerprint-based reconcile (noop / reload-via- syncconf / full restart) mirroring mtproto.Manager so a same-protocol edit doesn't force an unnecessary interface bounce that would drop every peer's connection. Frontend and install.sh's DKMS/awg-tools setup are tracked separately; this is backend-only. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * feat(amneziawg): add frontend support and fix a Go->Zod generator gap Wires the amneziawg protocol through the panel UI the same way every other protocol is registered: a Zod settings schema (nested {server, clients}, matching the Go JSON exactly), the protocol enum, the inbound-form's per-protocol fields component and its tab-visibility allowlist, the default-settings factory, the client schema dispatcher, and the sniffing-capability exclusion (no Xray inbound exists for amneziawg, same as mtproto). Client key/allowedIPs fields are reused rather than duplicated: since AmneziaWG clients are wire-identical to WireGuard clients (same model.Client fields), ClientFormModal renders one shared field block for both, switching only the visible label by which protocol is active. The private-key input also gets a live public-key sync via a new useEffect, because unlike WireGuard's Xray-native inbound (which re-derives its public key at runtime and never stores one), AmneziaWG's server.publicKey is a real persisted field the Go backend reads directly — free-typing a new private key without this would silently save a mismatched keypair. Adds a downloadable per-client .conf (amneziawgConfig.ts, mirroring wireguardConfig.ts) with the obfuscation lines, and an InboundOption.AwgServer field on the Go side so the config builder gets the full server block in one round trip. Along the way, running tools/openapigen surfaced a real bug: it doesn't flatten anonymously-embedded Go structs the way encoding/json does, so ServerSettings embedding Obfuscation20 produced a Zod schema with a nested `obfuscation20` key that never matches the real wire JSON. Fixed by un-embedding (flat fields + an accessor method) and registering internal/amneziawg in the generator's own package list, which had been silently emitting a dangling schema reference. English and Russian translations are complete; the other 10 locale files still fall back to English for the new keys. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * feat(amneziawg): complete frontend parity for the Inbounds list page The Clients page (form, CRUD, QR/config) already worked from the prior commit; this closes the remaining gap on the Inbounds side and in a couple of protocol allowlists that a plain search for existing wireguard/mtproto handling turned up. lib/xray/inbound-link.ts gets amneziawg-specific link/config builders (genAmneziaWGLink/genAmneziaWGConfig, plus the *s fan-out variants) mirroring the wireguard ones — AmneziaWG has no legacy peers-array to fall back to, so these read settings.clients directly and add the obfuscation lines every client must share with the server. Wired into genInboundLinks generically, and into three consumers that call the wireguard builders directly rather than through that dispatcher: QrCodeModal, InboundInfoModal, and InboundsPage's bulk export. ClientInfoModal, ClientBulkAddModal, and the bulk attach/detach modals each had their own protocol allowlist that needed amneziawg added alongside wireguard/mtproto. Two real gaps surfaced by grepping every remaining 'wireguard' / Protocols.WIREGUARD hit in frontend/src rather than trusting the checklist was exhaustive: - useInbounds.ts's TRACKED_PROTOCOLS gates the deactive/depleted/ expiring/online client counts shown per inbound on the list page; without amneziawg those counts would silently read zero. - inbound-tag.ts is an explicit client-side mirror of the Go backend's port_conflict.go (the file says so itself: "Keep in sync"). It still only special-cased wireguard for UDP, so an amneziawg inbound would have fallen through to the TCP default and disagreed with the backend's own port-conflict math. Also finishes translating the AmneziaWG UI strings into the 11 locale files that were still falling back to English (ar-EG, es-ES, fa-IR, id-ID, ja-JP, pt-BR, tr-TR, uk-UA, vi-VN, zh-CN, zh-TW), matching en-US/ru-RU key-for-key (26 new keys, verified by count in every file). Not run anywhere: npm run typecheck / build. This machine has neither Node nor npm, so nothing here has compiled — reviewed by hand plus brace/paren balance checks and cross-referencing the generated Zod/TS types. Treat this as needing a real typecheck before shipping. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * docs(install): note that AmneziaWG kernel module install is still manual Tracked separately (not yet ported into this script) — see coinman-dev/3ax-ui's install_amneziawg for the reference approach (ppa:amnezia/ppa). Also serves as a real, path-filter-matching change to get the previous empty commit's CI trigger to actually fire — release.yml's push trigger is paths-scoped and an empty commit changes no files, so it never matched. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * feat(amneziawg): add a button to randomize obfuscation parameters Mirrors the existing key-regenerate button next to the private key field. Client-side randomization matches the ranges/constraints of GenerateObfuscation20's "default" preset (internal/amneziawg/params.go) closely enough for a form suggestion — the user can still hand-edit any field afterward. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * feat(install): auto-install the AmneziaWG DKMS module + amneziawg-tools Ports install_amneziawg from coinman-dev/3ax-ui's install.sh, adapted to this script's broader distro coverage and NONINTERACTIVE convention: - Ubuntu/Debian/Armbian: ppa:amnezia/ppa (primary, tested path), with a reachability pre-check for the Launchpad PPA host — often blocked by hosting providers, especially Russian VPS — so a flaky network skips the feature instead of hanging apt through several retries. - Fedora/RHEL-family, Arch/Manjaro/Parch: best-effort fallback to plain wireguard-tools (+ AUR amneziawg-dkms via yay/paru when available), with a manual-install pointer. - Everything else: manual-install pointer only. Also installs ndppd and persists IPv4/IPv6 forwarding (for the future IPv6/NDP phase, not yet wired into the panel) and adds a Secure Boot warning at the end of the run, since a DKMS-built module is unsigned and won't load while it's enabled — a common trap on cloud VPS images. Never fatal: the panel installs and runs fine either way, an AmneziaWG inbound just won't bring up its tunnel until the module is present. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * fix(amneziawg): resolve all 3 real CI failures (typecheck/lint/codegen) Found by checking the fork's Actions tab after the last two pushes — the release build passed (it doesn't run these checks) but the separate CI workflow caught three real issues: - golangci-lint (noctx): every internal/amneziawg/manager.go exec.Command call is now exec.CommandContext with a 30s timeout, so a hung awg-quick/awg invocation can't block the reconcile job indefinitely (mirrors internal/mtproto/process.go's own CommandContext usage). - tsc --noEmit: frontend/src/schemas/client.ts's hand-maintained InboundOptionSchema (used by the useClients hook, separate from the auto-generated one in generated/) never got an awgServer field added when the AmneziaWG frontend work was done — every read of inbound.awgServer.* in amneziawgConfig.ts was typing as {}. Added AwgServerOptionSchema, nested (not flattened like wg*) to match what amneziawgConfig.ts already expects. Also guarded server.publicKey in inbound-link.ts's genAmneziaWGLink against the schema's optional type. - codegen staleness: frontend/public/openapi.json is produced by a Node script (gen:api) this machine can't run; hand-applied the exact diff the CI failure log already showed (amneziawg protocol enum entry, ServerSettings schema, InboundOption.awgServer, one example payload), verified as valid JSON. Also confirmed independently by this run: install_amneziawg (previous commit) installed and loaded the DKMS module successfully on both amd64 and arm64 CI runners. The two "Deploy Smoke Tests" failures are unrelated to this change — this fork has only ever published the dev-latest pre-release, and GitHub's /releases/latest API deliberately excludes pre-releases, so the smoke test's no-argument install path (which resolves "latest") has nothing to find. Not a regression; needs an actual tagged release whenever that's wanted. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * feat(amneziawg): Phase 2a — IPv6 support + NDP proxy Adds native dual-stack IPv6 to AmneziaWG inbounds, ported from coinman-dev/3ax-ui's approach: - ServerSettings gets ipv6Enabled/ipv6Subnet/ipv6ExternalInterface; Instance carries the server's own IPv6 address (first host of the subnet) alongside its IPv4 one. - defaultAmneziaWGClients allocates an IPv6 host address per client (second AllowedIPs entry) when the server has IPv6 enabled, reusing allocateWireguardAddress — which needed a real fix along the way: it always suffixed "/32" regardless of address family, which is wrong for an IPv6 host address (needs /128). Now family-aware. - generateServerConfig's PostUp/PostDown gains IPv6 forward-accept rules, proxy_ndp sysctl, and one `ip -6 neigh add/del proxy` entry per enabled peer with an IPv6 address — the lightweight per-client method, not the ndppd-daemon whole-subnet method (not worth the config-file-management complexity at this scale; ndppd itself is still installed by install.sh in case that changes later). - ValidateIPv6Subnet rejects a malformed subnet before save. - Frontend: ipv6Enabled/ipv6Subnet/ipv6ExternalInterface fields on the AmneziaWG inbound form, EN+RU translations, openapi.json/generated/* regenerated (the latter via `go run ./tools/openapigen`, pure Go). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * fix(amneziawg): fill in IPv6 fields missed by the Phase 2a commit Two real gaps the CI caught (both new fields, both my miss): - inbound-defaults.ts's createDefaultAmneziawgInboundSettings() built a server object literal predating ipv6Enabled/ipv6Subnet/ ipv6ExternalInterface — AmneziawgServer's inferred type now requires them (zod .default() fields are non-optional post-parse), so this didn't typecheck at all. - openapi.json's ipv6Enabled property was missing the description the real generator attaches (the Go doc comment covering all three IPv6 fields is attached to the first one) — a one-line diff, but git diff --exit-code doesn't care how small. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * feat(amneziawg): Phase 2b — per-client port-forwarding Admins can now set a per-client ForwardedPorts string (e.g. "80, 443, 8000-8100") that gets DNAT'd + FORWARD'd to that peer's tunnel address via iptables rules in PostUp/PostDown, ported and simplified from coinman-dev/3ax-ui's shared/portfwd. Two decisions worth flagging for future readers: - The iptables --comment tag on each rule is awg-fwd-<fnv32a(email)>, not the raw client email. Email is admin/API-supplied free text that ends up embedded in a shell-executed PostUp/PostDown line; a hash can never carry a shell metacharacter through where raw interpolation could. - The reconcile manager gained a third fingerprint (portFwdFP, next to the existing structural/peers ones). `awg syncconf` only touches the WireGuard peer table — it never re-applies PostUp/PostDown iptables rules — so a port-forward-only change has to force a full awg-quick down+up bounce, same as a structural change, rather than the lighter sync a plain peer add/remove can use. Also fixes a real pre-existing bug found while wiring up IPv6 client allocation in the previous commit's spirit: allocateWireguardAddress always suffixed "/32" regardless of address family, which produced invalid host bits for IPv6 (needs "/128"). ForwardedPorts flows through model.Client -> model.ClientRecord (gorm column wg_forwarded_ports, auto-migrated) -> ToRecord/ToClient/ MergeClientRecord, mirroring the awgServer field's earlier lesson that new fields need checking against a second, hand-maintained persistence-layer struct. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * feat(amneziawg): route a client's traffic through Xray via the Routing page Every enabled AmneziaWG inbound gets its own Xray TPROXY bridge automatically, with no toggle to enable first: a loopback dokodemo-door inbound (sockopt.tproxy) tagged with the AmneziaWG inbound's own real tag, so it's already selectable in the existing Routing page's inbound-tag picker — the same trick the mtproto sidecar's own bridge already relies on (InboundService.GetInboundTags is a plain, protocol-blind SELECT over every inbound row's tag, no dedicated UI plumbing needed). internal/amneziawg's defaultPostUpDown TPROXYs every peer's traffic into that bridge unconditionally; the bridge's port is derived deterministically from the inbound's id (EgressPortForInbound) so the kernel-side reconcile loop and the Xray-config generator never need to negotiate a runtime value between them. injectAmneziawgEgress never generates a routing rule itself — whether a client's traffic goes anywhere beyond Xray's default routing is entirely up to whatever rules the admin adds through the existing Routing UI (pick the AmneziaWG inbound's tag as source, optionally a specific peer's IP via that page's own Source-IP field, and an outbound), exactly the same workflow as routing any other protocol. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * fix(amneziawg): recover orphaned interfaces after an ungraceful exit Two gaps left an AmneziaWG interface stuck outside the manager's control after a crash (kill -9/OOM/panic skips StopAll): - ensureRestart's teardown was gated on the in-memory `exists` map, which is always empty on a fresh process, so a survived interface never got interfaceDown before interfaceUp tried `ip link add` against a name the kernel already had — failing forever and never populating m.ifaces, so traffic accounting silently stopped and the inbound could never be removed. Gate on isInterfaceUp instead, which checks real kernel state rather than this process's own bookkeeping. - An inbound deleted from the database entirely while the panel was down has no entry in `desired` ever again, so it never reaches the per-id cleanup loop in Reconcile (which only walks m.ifaces). Add a one-time sweepOrphansLocked scan of configDir, mirroring mtproto.Manager.sweepOrphansLocked, that tears down and removes any leftover interface/config not in the current desired set. Found by the automated review on MHSanaei/3x-ui#6105 (Finding 1). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * i18n(amneziawg): backfill IPv6/obfuscation/port-forwarding keys in 11 locales Only en-US/ru-RU ever got these 9 keys as each AmneziaWG feature landed (the regenerate-obfuscation button, then Phase 2a's IPv6 fields, then Phase 2b's per-client ForwardedPorts) — the other 11 locale files were never backfilled, so i18next has been silently falling back to English for all of them since Phase 1. Cosmetic-only (never broke anything), but now closed for every shipped locale. * fix(amneziawg): resolve 7 Medium findings from the automated PR review Each is independently reproducible; fixed together since one review pass found all of them. - manager.go: the shared "ip rule add fwmark" policy route had no existence check, so it duplicated in "ip rule show" on every interface bounce (which hostRulesFingerprint forces on any client add/remove/ re-IP). Now checked via "ip rule list | grep -q ..." first. (Finding 2) - params.go: ExternalInterface, IPv6ExternalInterface, and subnetIp/ subnetCidr are interpolated unescaped into a shell-executed PostUp/ PostDown line, but only obfuscation and the IPv6 subnet were validated before save. Added ValidateInterfaceName (a strict charset+length pattern) and ValidateSubnetIPv4 (netip.ParsePrefix), wired into normalizeAmneziaWGSettings. (Finding 3) - amneziawg_job.go: IsAwgInstalled() existed but nothing ever called it, so a host without awg/awg-quick (the Docker image, RHEL, Arch, a failed install.sh PPA step) logged a reconcile failure every 10s forever. Now checked once an inbound actually needs it, warning once instead of spamming. (Finding 4) - client_inbound_apply.go: the WireGuard/AmneziaWG credential carry-forward (added so a metadata-only client edit doesn't rotate keys) never covered ForwardedPorts, so a partial edit -- an API call or Telegram-bot toggle that omits the field -- silently wiped a client's port-forwarding spec. Carried forward and written back the same way the key fields already are. (Finding 5) - manager.go: hostRulesFingerprint keyed each peer on its IPv4 address only, and structuralFingerprint omitted IPv6Enabled/IPv6ExternalInterface entirely, so an IPv6-only change could pick the syncconf reload path (which never re-runs PostUp, leaving a stale NDP-proxy entry) or be a complete no-op. Both fingerprints now cover the IPv6 fields. (Finding 6) - port_conflict.go: the AmneziaWG egress bridge (injectAmneziawgEgress) binds 127.0.0.1:63100+id with no collision check anywhere, since it isn't a database row the ordinary port-conflict query can see -- same blind spot the reserved Xray API port already has its own check for. Added the equivalent check for the AmneziaWG bridge port. (Finding 7) - install.sh: install_amneziawg ran unconditionally for every install/ update, building a DKMS kernel module and enabling host-wide IPv4/IPv6 forwarding whether or not the feature is ever used. Gated behind a new should_install_amneziawg (XUI_INSTALL_AMNEZIAWG=true/false, or an interactive y/N prompt defaulting to no). Also replaced the deprecated apt-key adv with a dedicated keyring + signed-by= on the Debian branch, and guarded its sources.list appends against duplication on a retried install. (Finding 8) Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * feat(amneziawg): make the Xray TPROXY bridge a per-inbound opt-in Addresses Finding 10 from the automated PR review: an always-on TPROXY bridge makes every AmneziaWG tunnel hard-depend on Xray being up (all traffic, including DNS, drops whenever Xray restarts), and forces a full awg-quick down+up bounce on any client add/remove/re-IP, permanently losing the syncconf fast path. Adds ServerSettings.RouteThroughXray (off by default): - defaultPostUpDown only emits the TPROXY/policy-route rules when it's on; a plain AmneziaWG tunnel now has zero Xray dependency out of the box. - structuralFingerprint covers it (toggling it changes whether PostUp/ PostDown contain any TPROXY rules at all -- structural, not a per-peer host-rule). hostRulesFingerprint's IPv4 tracking is now itself conditional on RouteThroughXray (and IPv6 tracking on IPv6Enabled), so an instance that never uses either keeps the syncconf fast path for a plain peer re-IP. - injectAmneziawgEgress only creates a bridge for inbounds that opted in; checkAmneziawgEgressConflict (the Finding-7 fix) now parses each candidate through InstanceFromInbound so a non-routed inbound's port is correctly never treated as reserved. - New inbound-level Switch in the AmneziaWG form; the actual outbound decision is still made entirely through the panel's stock Routing page, same as before -- only whether the bridge exists at all is now a choice. Translation keys added to all 13 locales in the same commit this time, not backfilled later (see Finding 9's lesson). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * fix(amneziawg): resolve 4 Low findings from the automated PR review - manager.go: serverAddress assumed subnetIp always ends in ".0"; a base like "10.8.1.5" was used verbatim as the server's own address, eventually colliding with peer allocation (which starts at .2 upward). Now derives the first host of the actual subnetIp/subnetCidr network via netip, matching serverAddressV6's own approach. A /32 base (no host bits at all) is still used as-is. (Finding 12, partial -- the /16 pool-widening half of this finding only exists on the upstream-pr/amneziawg branch's merged client_wireguard.go, not here; handled separately on that branch.) - manager.go: ensureLocked carried the previous per-peer traffic counters (`last`) forward even through a full restart, but awg-quick down+up resets the kernel's own counters to zero -- the next CollectTraffic computed a large negative delta (clamped to 0), silently discarding real traffic. Extracted the decision into nextTrafficBaseline: only a reload (syncconf) preserves the baseline. (Finding 13) - portfwd.go: exported ForwardedPortsInclude; inbound_amneziawg.go's new checkForwardedPortsConflict uses it to reject, at save time, a client's forwardedPorts that would DNAT the panel's own port or another enabled inbound's port to the tunnel client -- portForwardLines has no destination restriction, so this collision was previously silent. Wired into both the single-client update path and the add-client path (client_inbound_apply.go), plus normalizeAmneziaWGSettings for the whole-inbound save path. (Finding 14) - inbound.go: InboundOption.AwgServer sent the whole ServerSettings struct including PrivateKey to GetInboundOptions callers -- a shared, admin-wide dropdown-filling endpoint the frontend's own AwgServerOptionSchema never reads that field from. Redacted it before assigning. (Finding 11) Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * fix(amneziawg): don't widen the peer address pool past AmneziaWG's own subnet Completes Finding 12 from the automated PR review (the serverAddress half of this finding was already fixed on main and cherry-picked here). This half is specific to this branch: allocateWireguardAddress's /16 pool-widening fallback is an independent addition from upstream's own main that this branch inherited during the cherry-pick rebase -- it doesn't exist on the fork's own main at all, so this fix can't be cherry-picked the normal way and is committed directly here. Widening is safe for WireGuard's own Xray-native inbound (AllowedIPs isn't tied to a strict kernel interface subnet), but AmneziaWG's kernel interface Address is exactly the configured subnet -- an address allocated from the containing /16 once the /24 fills up would be silently unroutable. allocateWireguardAddress now takes an explicit allowWidening bool: WireGuard's own caller passes true (unchanged behavior), AmneziaWG's passes false (fails loudly on exhaustion instead). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * docs(docker): note that AmneziaWG doesn't work in this image Investigated: the image is Alpine-based, and AmneziaWG's own packaging (DKMS module + amneziawg-tools) doesn't target Alpine/musl at all -- unlike the Debian/Ubuntu/Fedora/Arch paths install.sh already handles, there's no package to apk add even with full host network/capabilities. The panel already degrades gracefully (IsAwgInstalled() logs one warning instead of retrying forever), so no code change is needed -- just made the reason explicit at the point where a user would reach for cap_add/ network_mode to try to work around it. * fix(sub): include amneziawg inbounds in subscription links getInboundsBySubId's SQL protocol allowlist never had 'amneziawg' added, so every AmneziaWG client was silently excluded from all three subscription formats (plain/individual links, JSON, Clash) and from the Telegram bot's QR/individual-link buttons, which fetch through the same path. genAmneziaWGLink itself was already fully implemented and already wired into GetLink's dispatch switch -- it just never got a chance to run. Same bug shape as the earlier TRACKED_PROTOCOLS frontend gap: a hardcoded protocol list one entry short. Found while investigating whether the Telegram bot needed AmneziaWG- specific client-management code -- it doesn't (the bot itself is fully protocol-agnostic), but this is the actual root cause of "can't share an AmneziaWG client's config via the bot." Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * fix(inbound): enforce node-eligibility server-side, not just in the UI Investigated multi-node interaction with AmneziaWG: the master's own reconcile (DesiredAmneziaWGInstances) and Xray config generation (injectAmneziawgEgress, the GenXrayInboundConfig protocol skip) all correctly filter on NodeID IS NULL, so a node-assigned AmneziaWG (or MTProto) inbound would never be managed by the master. But nothing stopped one from being created that way: NODE_ELIGIBLE_PROTOCOLS (frontend/src/pages/inbounds/form/InboundFormModal.tsx) only hides the node picker client-side -- a direct API call could set nodeId on an AmneziaWG inbound, which every node then reconciles as an ordinary local inbound (nodes run the identical binary, full cron suite included), leaving it running unmanaged and untracked by the master's own AmneziaWG bookkeeping. Added isNodeEligibleProtocol (inbound_protocol.go), mirroring the frontend's allowlist, and enforced it in both AddInbound (the actually exploitable path -- nodeId comes straight from the request) and UpdateInbound (defense in depth; NodeID is already restored from the stored row there before this check, so it mainly guards against a protocol change on an existing node-hosted inbound). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * fix(amneziawg): allow TPROXY-marked traffic through a default-deny INPUT chain TPROXY never rewrites a packet's own destination address, only the routing decision. A default-deny firewall whose INPUT chain sanity-checks "is this destination actually local" (UFW's ufw-not-local, via addrtype --dst-type LOCAL, is a concrete example) silently drops the redirected packet before Xray's socket ever sees it -- RouteThroughXray looked fully configured (TPROXY rule present and counting, Xray listening with IP_TRANSPARENT set) yet every peer's traffic vanished with no trace on either side. Adds an idempotent, never-torn-down "iptables -I INPUT 1 -m mark --mark <fwmark> -j ACCEPT" alongside the existing shared policy route, so this works regardless of which firewall manager owns the rest of the INPUT chain. * fix(frontend): give AmneziaWG the same UDP tag and its own tag color The Inbounds list only special-cased isWireguard/isHysteria for the "UDP" network badge, so an AmneziaWG row showed just the bare protocol tag with no transport badge next to it. Added the missing isAmneziawg flag (mirrors isWireguard exactly) and wired it into the same branch. Client-row protocol-color maps in ClientsPage/HostList had no amneziawg entry, silently falling back to grey -- ClientInfoModal already had amneziawg: 'yellow' from earlier work, these two just never got it. * feat(logs): show which AmneziaWG client an access-log line belongs to The dokodemo-door TPROXY bridge every AmneziaWG peer's traffic is routed through has no per-user identity, so Xray's own access log never carries an "email:" token for these lines -- the Access Logs modal showed a blank Email column for every in-*-udp row, even though every other protocol's rows show the client normally. The peer's decapsulated tunnel IP does survive as the log's "from" address, and that IP deterministically maps to exactly one configured peer. Builds a "<inbound tag>|<ip>" -> email index from the same AmneziaWG inbounds already parsed elsewhere (amneziawg.InstanceFromInbound), and fills in Email from it whenever the raw log line didn't have one. * fix(amneziawg): enable sniffing on the TPROXY bridge Domain-based Routing rules could never match RouteThroughXray traffic: an AmneziaWG peer resolves DNS itself, through the tunnel, before ever sending a packet, so the decapsulated traffic TPROXY hands to the bridge is already a bare destination IP with no domain name attached at the network layer. Every other inbound recovers this via sniffing (confirmed working for the stock wireguard inbound, which does have it configured); the bridge never got a sniffing block at all, so only tag/IP/network-based rules could ever match it -- any domain rule above it in the list was silently unreachable. * docs: add an AmneziaWG config page and list it as a supported protocol Closes the PR checklist gap: the feature shipped with zero mention on the docs site. Mirrors reality.mdx's structure (key settings, setup steps, config excerpt) and notes the Docker/multi-node/Telegram-bot caveats the PR itself is honest about not having confirmed. * fix: address the fresh review round on PR #6105 (8 findings) 1. hostRulesFingerprint didn't account for ForwardedPorts when RouteThroughXray was off, so re-IPing a peer with port-forwarding configured left stale DNAT rules pointing at an address the next peer could be handed. 2. Server/client config values (keys, email, I1) were never validated for control characters before being written into the generated .conf; a newline could smuggle a PostUp hook into awg-quick's parser. Added ValidateConfigValue at save time and a sanitizeConfigValue backstop at render time. 3. checkForwardedPortsConflict didn't scope to node_id IS NULL, so a port used only on a different node produced a false collision; also hoisted the panel-port/inbounds lookup out of the per-client loop (portConflictContext) so N clients cost one query, not N. 4. PostDown commands were ";"-joined and abort on the first failure; appendOrTrue makes teardown best-effort so an external firewall flush can't leave DNAT rules to accumulate across bounces. 5. The "ip rule list | grep -q" existence check could SIGPIPE under pipefail and re-add a duplicate rule; switched to grep -c >/dev/null. 6. Ported the vpn:// share-link format (base64url of the plain .conf text, matching the real AmneziaVPN app) onto this branch -- it had only ever landed on our own fork's main, so this PR branch was still on the old amneziawg://+query-params scheme our own docs no longer described. Also corrected the docs' install.sh claim (opt-in/ interactive, not automatic) and stale pre-opt-in comments in route_egress.go. 7. install.sh: Arch's ndppd install used pacman -Syu (full system upgrade) instead of -Sy like every other call in the script; and should_install_amneziawg re-prompted on every `x-ui update` even when awg was already installed. 8. CollectTraffic could clobber a concurrent restart's freshly-reset (empty) traffic baseline with stale pre-restart counters, since getPeerStats runs lock-free; now checks pointer identity before writing back. sweepOrphansLocked permanently disabled itself on a transient os.ReadDir failure instead of allowing a retry. go build/vet/test and frontend typecheck/lint/build/vitest all pass. * fix(install.sh): check the live sysctl value, not sysctl.conf text Reviewer feedback (cherts, PR #6105): grepping /etc/sysctl.conf for the setting name is unreliable -- many distros split sysctl config across /etc/sysctl.d/*.conf, and /etc/sysctl.conf can be a symlink into that directory, so the check can miss an already-active setting (harmless duplicate append) or match a disabled/commented line (forwarding silently stays off). Query the live value via `sysctl -n` instead, which is accurate regardless of which file set it. Applied the same fix to both the IPv6 and IPv4 checks for consistency. * fix: update inbound_amneziawg.go to the split buildInboundForLocalRuntime Same fork-only-file blind spot as the one caught on our own main after the 3.6.0 sync: upstream split buildRuntimeInboundForAPI into buildInboundForNodePush / buildInboundForLocalRuntime (part of the node-sync client-deletion fix, 5bc81dfd), updating every call site it could see. This file doesn't exist upstream, so it kept calling the old name even after the branch merged in that commit. * fix(frontend): recognize AmneziaWG's vpn:// scheme in share-link labels The shared link-tag/label helper (used by the client info modal, QR modal, and subscription page) had no entry for the vpn:// scheme AmneziaWG links use, so it fell through to the generic fallback: a plain "Vpn" tag with no color, and an empty remark/port that made the row's title fall back to "Link N" instead of the inbound's actual name:port — unlike every other protocol, which shows its real tag and label. vpn:// links are base64url of a plain .conf text (matching the real AmneziaVPN app's own share-link format), not a structured URL, so there's no query string or #hash to read a remark/port from. Decode the payload and pull the remark/endpoint back out of the .conf text directly instead. * fix(xray): force a full restart for TPROXY inbounds, never hot-add them Real incident: an AmneziaWG inbound with RouteThroughXray enabled lost all internet on that connection after a migration. Root-caused on the live box -- iptables TPROXY counters were incrementing (packets correctly redirected to 127.0.0.1:63110), but nothing was actually listening there (ss showed nothing on that port) until a full `systemctl restart x-ui`, after which the bridge came up immediately. Xray-core's gRPC AddInbound reports success for a new sockopt.tproxy inbound (internal/amneziawg's own Xray egress bridge is the only kind this fork ever generates) but doesn't reliably bind a working listener for it outside of process startup -- the bridge silently never comes up, and RouteThroughXray traffic goes nowhere until the next full restart happens to occur for an unrelated reason. diffInbounds already has this exact defensive pattern for REALITY inbounds ("a gRPC remove+add does not reliably rebuild the REALITY authenticator"), just never extended to TPROXY, and only in the already-existing-then-changed branch -- the "brand new inbound" branch had no such guard at all, which is exactly the path a freshly-enabled RouteThroughXray bridge takes. Added inboundUsesTproxy and wired it into both branches. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * fix(amneziawg): flag Xray for resync when a peer edit changes qualifying state Real production bug, root-caused on iiadmin-vps: updateAmneziaWGInbound/ AddInbound/DelInbound only ever updated the kernel interface via amneziawg.GetManager() -- they never called SetNeedRestart the way every other protocol's mutation path does (client_crud.go, inbound.go, etc. all do). injectAmneziawgEgress's TPROXY bridge inbound depends on InstanceFromInbound finding at least one qualifying peer plus RouteThroughXray, so an edit that flips that (first peer added, last one removed, RouteThroughXray toggled on) previously required a full panel restart before the bridge actually got created, with no error anywhere: the kernel interface would handshake fine, but traffic redirected into the bridge's TPROXY port went nowhere because nothing was listening there. diffInbounds/inboundUsesTproxy already correctly force a full restart for a brand new TPROXY inbound (bdee0a20) -- that part was never the bug. The gap was entirely upstream: nothing ever told Xray a resync was even needed. * fix(clients): reject AllowedIPs already used on another WireGuard/AmneziaWG inbound defaultWireguardClients/defaultAmneziaWGClients only ever checked uniqueness against their own inbound's client list, so two inbounds sharing a subnet (same protocol or not) could silently hand out or accept the same address -- the exact scenario behind a real duplicate-IP incident where a WireGuard and an AmneziaWG client both ended up on the same address. otherTunnelAllowedIPs now collects every address already claimed on every other tunnel inbound and folds it into both the auto-allocation pool and the manual-entry collision check, naming the other inbound in the error when it fires. * fix(frontend): add the missing AmneziaWG config download on the sub page The subscription page already gave WireGuard links their own "Config" block (copy/download/QR of the actual .conf, via wireguardConfigFromLink reversing the wireguard:// query params) but had no equivalent for AmneziaWG's vpn:// links -- its isWireguardLink gate never matched them, and no reverse-parse helper existed for this page specifically. Every other surface (InboundInfoModal, ClientInfoModal, ClientQrModal) already had this parity; this was the one page that didn't. Fixed by adding amneziawgConfigFromLink (inbound-link.ts), simpler than its WireGuard counterpart since a vpn:// payload already *is* the plain .conf text -- just base64url-decode it, no query-param reconstruction needed -- and wiring it into SubPage.tsx alongside the existing WireGuard block, reusing the same pages.clients.amneziaWgConfig label the other three surfaces already use. * fix(xray): force a full restart for password-auth SOCKS5 hot-apply Real production incident: editing a client under an AmneziaWG inbound left its embedded SOCKS5 relay's settings byte-different (a new account list), and Xray's gRPC remove+add hot swap silently dropped the account for a peer whose email contained non-ASCII characters -- its tunnel kept handshaking fine but all its traffic got rejected at the SOCKS5 layer, while every other peer on the same relay was unaffected. A full restart (reading the same JSON straight from disk) always produced the correct account list. socks isn't in userDiffableProtocols (that only covers vless/vmess/trojan's clients+email shape, not accounts+user), so any settings drift on this inbound fell through to the generic remove+add path. Forces a restart instead, the same defensive choice already made for REALITY and TPROXY -- scoped to auth:"password" specifically so the other, noauth SOCKS5 bridges (panel/node/mtproto egress) keep the cheaper hot path. * Fix Attach reusing one identity's address across wg/awg inbounds ClientService.Attach deliberately copies one identity's stored AllowedIPs into every WireGuard/AmneziaWG inbound it's attached to in the same call, so the same person gets the same tunnel address on every protocol they use. Its loop calls addInboundClient once per inbound, and each of those independently computes otherTunnelAllowedIPs -- so by the second inbound in the batch, the first inbound's just-written copy of this identity's own address looked like a cross-inbound collision against itself. Real production symptom this caused: detaching then re-attaching a client to both wg and awg failed with "wireguard: allowedIPs entry X is already used by a client on inbound 'awg' (#N)" -- the exact address the identity is supposed to keep, rejected as if it belonged to someone else. Add a selfEmails exclusion to otherTunnelAllowedIPs and populate it from the client(s) being processed at the one real call site. Safe unconditionally: ClientRecord.Email is globally unique, so a match can only ever be this same identity's own entry on a sibling inbound, never a genuine different client's address. Reproduced the underlying mechanism live (manual entry correctly rejected as a cross-inbound collision; fresh auto-allocation correctly avoided a used address) before writing the fix, to confirm the guard itself works and the bug is specifically in how Attach's per-inbound calls interact with it. * Attach: allocate fresh when re-attaching with no active tunnel The previous fix (82cc69f5) made Attach's own address-reuse correctly not collide with itself across inbounds -- but it still always reused an identity's stored AllowedIPs verbatim, even when that identity currently has zero WireGuard/AmneziaWG attachments at all. A real report from testing this live: an identity fully detached from both its wg and awg inbounds, then re-attached, got its old address back even though several lower addresses were free -- because nothing about being fully detached ever cleared the stored value Attach copies from. Add hasTunnelAttachment, checked once against the identity's CURRENT inbound set before Attach's loop runs: if none of its current inbounds is WireGuard/AmneziaWG, clear the stored AllowedIPs so this attach allocates fresh (matching what a brand-new client would get) instead of resurrecting an address nothing reserves anymore. Left alone when the identity already has an active tunnel elsewhere, so extending it to a second protocol still keeps a consistent address. * Fix TestOtherTunnelAllowedIPsExcludesSelfEmail's own test setup CI caught this: the "genuinely different client" (other@wg) was seeded onto the SAME inbound passed as excludeID, which otherTunnelAllowedIPs already excludes entirely regardless of the selfEmails fix -- so the assertion that its address is still reported could never have passed, proving nothing either way. Move it onto the sibling inbound alongside shared@id, which is what the test actually needs to exercise (two clients on one sibling, one excluded by email, one not). * Attach: never inherit an address that doesn't fit the target inbound hasTunnelAttachment (from the earlier fix, commit 51067f16) only asked "does this identity have ANY tunnel attachment", treating that as license to reuse its stored address verbatim on every inbound being attached. Real production case this missed: an identity's stored address came from WireGuard's own fallback subnet (10.0.0.0/24, used when that inbound has no other clients to infer a base from), then got attached to a second, AmneziaWG inbound configured for a completely different subnet (10.8.1.0/24). defaultAmneziaWGClients's already-set-AllowedIPs branch only checks for collisions, never subnet membership, so the mismatched address was accepted silently -- producing a peer that can never actually connect, since an AmneziaWG address must fall inside the kernel interface's own configured subnet to be routable at all. Add addressesFitAmneziaWGInbound, checked per inbound inside Attach's loop: if the inherited address doesn't fit the SPECIFIC inbound being attached, clear it just for that one so it gets a fresh, valid allocation instead, while other already-attached inbounds keep their existing values. WireGuard has no equivalent strict subnet requirement (allocateWireguardAddress can widen to a fallback pool for it), so this only ever constrains AmneziaWG targets. * Give WireGuard an explicit, admin-configurable subnet field WireGuard previously had no configurable subnet at all -- only an implicit one, either inferred from existing clients' own addresses (wireguardAllocationBase) or a hardcoded 10.0.0.0/24 fallback when none exist yet. AmneziaWG, by contrast, has always had a real server.subnetIp/subnetCidr field in its settings, editable in the UI. User request: give WireGuard the same treatment. Backend: explicitWireguardSubnetBase reads an optional subnetIp/ subnetCidr pair from the inbound's own settings JSON (mirroring AmneziaWG's defaultAmneziaWGSubnetBases). defaultWireguardClients checks it first; only when unset does it fall back to today's inference-from-existing-clients behavior, so an inbound saved before this field existed keeps working exactly as it always has. Frontend: subnetIp/subnetCidr added to WireguardInboundSettingsSchema and the inbound form (mirroring AmneziaWG's own field layout/labels), with a real default (10.0.0.0/24, the same value the backend already fell back to) seeded for newly created inbounds so the field starts populated and editable rather than blank. Translated across all 13 locales. This also structurally closes the class of bug fixed in 82cc69f5/291c47b3: with wg and awg subnets explicit and independently controllable, an admin who wants matching addresses across both protocols can configure them to actually agree, instead of one silently inheriting the other's incompatible range. * Split the client edit form's AllowedIPs into per-protocol fields A client attached to both WireGuard and AmneziaWG shared one AllowedIPs form field with a dynamically-switching label, so its two genuinely different addresses could never both be shown or edited correctly. Worse, Update/Create broadcast that one shared value to every attached wg/awg inbound with no subnet-fit check, so an ordinary edit save could silently overwrite one protocol's address with the other's -- the same bug class already fixed for Attach, but reachable from any client edit. model.Client gains an optional AllowedIPsByInbound map so a caller can send distinct values per inbound; Update/Create honor it and, when it's absent, clear a shared value that doesn't fit an AmneziaWG inbound's own subnet instead of writing it through. A new TunnelAllowedIPsByInbound read path feeds the real per-inbound address to the client edit form via GET, which now renders two separate, correctly-labeled fields whenever both protocols are attached (unchanged single dynamic field otherwise). * Regenerate openapi.json for the new allowedIPsByInbound field Follow-up to 878ee839: gen:zod (frontend/src/generated) was already regenerated and committed, but gen:api (frontend/public/openapi.json) wasn't, so CI's codegen drift check failed. * Fix build breakage from merging upstream main: Update() gained a limitHwid param Two of our own AllowedIPs tests (not present upstream, so the merge never flagged them as conflicting) still called the old 3-arg Update(inboundSvc, id, client) -- upstream's hardware-ID-limit feature added a required limitHwid parameter that every other caller in this package already passes. Also drop createDefaultInboundSettings from InboundsPage.tsx: the merge conflict resolution kept the import, but upstream's clone-payload refactor (buildClonePayload, inbound-clone.ts) already calls it internally now -- this file doesn't need it directly anymore. * Fix real bug: AmneziaWG clients rejected as "empty client ID" in 3 places Three switch statements on inbound.Protocol handle "wireguard" explicitly (checking client.PublicKey) but fall through to the default case for "amneziawg" (checking client.ID, which AmneziaWG clients never set -- they use PublicKey/Email like WireGuard, not the VMess/VLESS UUID field). This is what the 4 AllowedIPs tests were actually catching: UpdateInboundClient's newClientId derivation hit this same default branch, so every Update() on an AmneziaWG client returned "empty client ID" before ever reaching the AllowedIPs logic being tested. Fixed by adding "amneziawg" alongside "wireguard" in each switch: addInboundClient's per-client validation, UpdateInboundClient's newClientId derivation, and AddInbound's per-client validation (the third one wasn't hit by these tests, but has the identical bug -- creating a brand-new AmneziaWG inbound with a client attached would fail the same way). * refactor(amneziawg): rename Obfuscation20 to Obfuscation31, drop the dead mobile preset Mechanical rename ahead of the AmneziaWG 3.1 parameter work: the type, generator and prose all said 2.0, and the "mobile" generator preset was reachable only from its own test. No behavior change. * feat(amneziawg): AmneziaWG 3.1 obfuscation parameters (backend + generated schemas) Adds the 3.1 parameter surface to the inbound settings and both Go config emitters: I2-I5 signature packets, HeaderProtectionKey (base64 32-byte, shared server<->client), ContentPaddingAddition, the five handshake-timing randomization ranges (RekeyAfterTime/RekeyTimeout/RejectAfterTime/ KeepaliveTimeout/MaxHandshakeAttempts), and the RandomTrailers/ DisableCookies switches. Freshly generated sets fill everything except I2-I5 (matching Amnezia's own generator) with jittered ranges bracketing WireGuard's stock timing constants; every reject window starts >= 30s above the rekey window by construction. Empty fields stay off the wire, so blanking a field disables just that feature. Validation generalizes the H1-H4 range checker for the new uint32-range fields, requires min 1 on timers, cross-checks rekey-vs-reject, and demands a real 32-byte base64 header-protection key. The manager warns once per process when the installed awg tools predate 3.1 but an inbound uses 3.1 parameters (awg-quick rejects unknown keys with a generic error otherwise); apply still proceeds. Requires amneziawg-tools v3.1.20260812+ / module or amneziawg-go v3.1.20260814+ on the host. * feat(amneziawg): emit and randomize 3.1 parameters in the frontend Both client-config emitters (the vpn:// link builder and the clients-page .conf builder) now carry the 3.1 [Interface] lines in the same order as the Go emitters. The obfuscation randomizer moves out of InboundFormModal into a shared lib/xray/amneziawg-obfuscation.ts that also fills the new fields, and createDefaultAmneziawgInboundSettings switches from static values to that generator — a fresh inbound now really gets the unique fingerprint the docs promise instead of the same jc=5/jmin=10 set on every install. Schema parse-time defaults for the new fields stay ''/false on purpose: real values come only from the generator, so resaving an inbound never mutates its stored parameters. A new parity test pins the hand-written AmneziawgServerSchema to the generated ServerSettings key set, so a field added on one side can no longer silently vanish from configs. * feat(amneziawg): 3.1 form fields and translations Inbound form gains inputs for I2-I5, HeaderProtectionKey (filled by the existing obfuscation Regenerate button), ContentPaddingAddition, the five timing ranges, and the RandomTrailers/DisableCookies switches; the MTU input picks up the min=1 its schema already enforced. All 13 locales get the 19 new keys and drop the "2.0" branding from the s3/s4/i1 labels. * docs(amneziawg): document 3.1 parameters; install.sh kernel/version notes The AmneziaWG page's obfuscation section moves from the 2.0 to the 3.1 parameter set: table rows for I2-I5, HeaderProtectionKey, ContentPaddingAddition, the timing-randomization ranges and the RandomTrailers/DisableCookies switches, a requirements callout (tools v3.1.20260812+, module/awg-go v3.1.20260814+, Linux 6.7+ for the DKMS path), and a sample client .conf that matches what the panel actually emits (including the DNS defaults and PersistentKeepalive it always had). install.sh warns before a DKMS build on a pre-6.7 kernel and after any install that left pre-3.1 amneziawg-tools on PATH. Also updates the hosts API operation paths ({id} -> {groupId}) in the stale ru/zh/fa reference pages: syncing docs/public/openapi.json for the new AmneziaWG schema fields surfaced that rename, which had never been copied over, and the docs build fails on paths missing from the spec. * fix(amneziawg): reject control characters and canonicalize 3.1 range values Adversarial review of the 3.1 work surfaced a validation gap: base64.DecodeString silently ignores CR/LF, so a header-protection key that picked up a line wrap in transit decoded to a valid 32 bytes, passed validation, and was emitted verbatim into every client config — where the orphan second line breaks the import while the server (whose emitter strips control chars) keeps running with the correct key. The key and range validators now reject control characters outright. Also from the same review: range values are canonicalized on save ("110 - 140" -> "110-140", whitespace-only collapses to feature-off, closing a case where the server conf rendered an invalid blank-value line the client emitters omitted); the rekey/reject invariant is now enforced against WireGuard's 120s/180s defaults when only one side is set; and the structural fingerprint joins on "\n" instead of "|", which is a legal I1-I5 character and made adjacent free-text fields join-ambiguous. * fix(install): resolve latest release tag via web redirect to dodge API rate limits The non-interactive install smoke test resolved the release version through the unauthenticated GitHub API (api.github.com/.../releases/latest), which allows only 60 requests/hour per IP. The test installs twice in one run, and on shared CI runner IPs the second call gets rate-limited, returns no tag_name, and install.sh treats an empty version as fatal (exit 1) — the same "Failed to fetch x-ui version" real users hit behind CGNAT/shared addresses. resolve_latest_tag() now reads the tag from the github.com releases/latest web redirect (not subject to the API rate limit), falling back to the API only if the redirect yields nothing. Verified with the real deploy/test/smoke-noninteractive.sh (two installs, both green). * fix(amneziawg): three review findings on #6105, plus a comment trim 1. A peer's allowedIPs reached the generated .conf unvalidated and unsanitized, unlike email/publicKey/preSharedKey which normalizeAmneziaWGSettings already guards. A newline in an entry let a following "[Interface]" re-open the interface section, whose "PostUp = ..." awg-quick then runs as root on the next apply. Reproduced end to end against generateServerConfig. The save path now rejects and canonicalizes through normalizeWireguardAllowedIPs, and the render path sanitizes as a backstop for rows predating the validation (an upgrade, a restored backup, a direct DB edit). H1-H4 get the same render-time sanitize, and the two NIC name fields a plausibility check, since stripping control characters alone would still let a shell metacharacter into a root-executed PostUp line. 2. EgressPortForInbound is 63100 + inbound id, so an id past 2435 derives a port above 65535 -- and Xray rejects the whole generated config over one invalid port, taking every other protocol down with it. It now reports ok=false past the range, and both the Xray bridge and its TPROXY rules are skipped instead of emitting an impossible port. 3. The downloadable AmneziaWG .conf read ClientRecord.allowedIPs, a single shared column that holds the WireGuard address for an identity attached to both protocols -- the exact ambiguity tunnelAllowedIPs was added to resolve for the edit form. The info and QR modals already hydrate that field, so they now pass this inbound's own address to the builder. Also trims the comment blocks in the files touched here to the 2-line guidance in CLAUDE.md: internal/amneziawg alone carried 423 comment lines in over-long blocks against 118 for the comparable internal/mtproto, and is now at 110. Every non-obvious constraint is kept (the kernel S1/S2 rule, why PostDown is best-effort, why grep -c and not -q, why the fingerprints split three ways); the narration is gone. Two hot_diff.go comments pointed at an internal/amneziawgnet package and an injectAmneziawgnetSocks function that exist nowhere in the tree; the checks themselves are unchanged. * feat(logs): add an AmneziaWG log view to the overview The overview has an access-log view for Xray but nothing for AmneziaWG, so when a tunnel misbehaves there is no way to see it from the panel at all. A kernel tunnel logs no per-request lines, so the equivalent view is built from the two things it does expose: - Live per-peer activity from `awg show <iface> dump`, joined to the client email through the desired peer set: last handshake, endpoint, allowed IPs, cumulative transfer and online state, newest handshake first. - The panel's own AmneziaWG event lines (interface up/down, awg-quick failures, the pre-3.1 tools warning), which are what actually explain a peer being absent from the table. POST /panel/api/server/amneziawglogs/:count serves both, with the same count + filter contract GetXrayLogs uses, and the modal mirrors XrayLogModal's toolbar, auto-update, mobile cards and download. The action-bar button is gated on a new status.amneziawg.configured, which stays true while an inbound exists but its interface is down -- exactly when the event lines matter. Verified against a running panel: the endpoint returns the peer table and real event lines ("awg/awg-quick not found on PATH", "create config dir: permission denied"), and count and filter both narrow as documented. One of those lines surfaced a Debugf that had been rendering as "for inbound1:amneziawg:"; fixed here since it is now user-visible. * fix(amneziawg): stop double-counting a routed inbound's traffic injectAmneziawgEgress tags its Xray bridge with the AmneziaWG inbound's own tag, so the stock Routing page can target it. Xray therefore reports that bridge's bytes under the inbound's tag, and XrayTrafficJob feeds them to AddTraffic -- which accumulates -- on top of the same bytes AmneziaWGJob already reported from `awg show dump`. An inbound with routeThroughXray on counted roughly twice its real traffic, which also inflates the quota checks that read the same counters. The awg counters are the complete measure: every peer, whether or not TPROXY routed it, and the same wire bytes the per-client totals are built from, so they stay and the Xray rows are dropped. Per-client stats were never affected -- a dokodemo-door bridge has no per-user identity, so Xray emits no user>>>email rows for it. Filtering happens before every consumer, so the DB totals, the external traffic inform and the dashboard's live speed all read one source per inbound. The set of bridge tags now comes from a predicate shared with injectAmneziawgEgress itself, with a test that pins the two together -- naming one tag too few doubles the traffic again, one too many makes real traffic vanish. * fix(amneziawg): align the three .conf emitters on one peer field order The panel builds an AmneziaWG client .conf in three independent places, and they disagreed: buildAmneziaWGClientConfig put PresharedKey right after PublicKey (wg-quick(8)'s own order, and what both WireGuard emitters on the clients side already use), while genAmneziaWGConfig and the Go amneziaWGConfigText put it after Endpoint. A user comparing a subscription link against a downloaded .conf sees the difference immediately, and the generators are exactly the kind of parallel implementation CLAUDE.md warns about drifting. Moves the two outliers onto the wg-quick order. Also drops the stray trailing newline that only appeared when PersistentKeepalive was set, so a config now always ends on its last set field whichever that is -- the same shape all three emitters produce for the same client. Parsing is unaffected either way (the format is order-insensitive, and the AmneziaVPN app reads it as a flat key-value bag), so this changes only the rendered text. Adds a test on each side that pins the peer block's field order, since nothing previously asserted it. * refactor(amneziawg): switch to the embedded amneziawg-go/gVisor architecture Replaces the kernel-module (DKMS) + awg-quick + TPROXY backend with the fork's own embedded design: amneziawg-go runs in-process over a userspace gVisor netstack, and each peer's decapsulated traffic relays into its own loopback Xray SOCKS5 inbound, so Xray's native stats/sniffing/routing work for free instead of through hand-rolled bridges. No kernel module, no DKMS, no Secure Boot conflicts, works the same in a container as on bare metal. - internal/amneziawgnet: new package (Device/UAPI, gVisor netstack, TCP/UDP forwarding, SOCKS5 relay, peer identity, IPv6 host-alias egress identity, per-client port-forwarding) - amneziawg-go v3.1.20260814 + gvisor. - internal/amneziawg: keep the reusable protocol-shape types/validation (Instance/Peer/Obfuscation, InstanceFromInbound); drop the OS-shellout half (awg-quick, TPROXY policy routing, NDP proxy, peer-stats parsing). - internal/web/service: rewire the 5 integration points (job, runtime, client-apply, web shutdown, xray config) from the old manager to the new one; the AmneziaWG log view is rebuilt on the embedded Device's own UAPI dump (extended to carry endpoint/AllowedIPs) instead of `awg show dump`. - install.sh: drop DKMS/ndppd/TPROXY/Secure-Boot installer code (~250 lines) - an entire recurring class of installer fragility goes away. - frontend: drop the now-meaningless routeThroughXray toggle (the relay is always on); keep the field in the Zod schema, unexposed, so it isn't silently stripped from stored settings on next save - two regression tests deliberately depend on the Go struct still carrying it. - docs/i18n: rewrite amneziawg.mdx for the new architecture; drop the dead routeThroughXray translation keys across all 13 locales. Real production throughput (embedded core datapath, isolated bench, same box the kernel-module path was measured on): ~296 Mbit/s up, ~640 Mbit/s down, vs. 414.69 MB/s (~3.3 Gbit/s) for the kernel module on the same hardware - a real gap, tempered by this being single-stream/no-SOCKS5-hop and most VPN traffic being latency-bound rather than throughput-saturating. * fix(amneziawg): restore the branch's own Obfuscation31 shape + 2 CodeQL findings The previous push's wholesale-copy of types.go/params.go from the fork's main branch pulled in that branch's own independent (and incompatible) naming for the same AWG 3.1 feature set: Obfuscation20/GenerateObfuscation20 instead of this branch's already-shipped Obfuscation31/GenerateObfuscation31, and a missing CanonicalizeUintRange -- broke every Go CI job (the whole matrix fails to compile when any one package doesn't, which is why govulncheck/ golangci/postgres-durable-first/race all failed identically, not just go-test). Restores params.go/params_test.go verbatim from this branch's own last commit (a strict superset of validation: it already cross-checks rekey vs. reject timing windows, which the copied version never did) and folds the 3.0/3.1 fields (HeaderProtectionKey, ContentPaddingAddition, the 5 timing fields, RandomTrailers/DisableCookies) into Obfuscation31 itself, matching the original struct exactly instead of as separate top-level Instance fields. instance.go, the two amneziawgnet call sites, and 7 amneziawgnet test files updated to match. Also drops the one test (sanitizeConfigValue) that only ever served the retired kernel-module .conf writer -- correctly not ported, so the test testing it shouldn't have been copied either. Also fixes 2 CodeQL findings the same push surfaced: a clamped uint64->int64 conversion for the new log view's live byte counters (server.go), and an unneeded len+len sum feeding a slice pre-size in the v6-egress outbound merge (xray.go) -- append already grows correctly without it. * chore(amneziawg): regenerate frontend schemas for updated doc comments npm run gen was missed after the previous commit's types.go doc-comment edits (Obfuscation20 -> Obfuscation31, ValidateHeaderProtection -> ValidateObfuscation in the prose) -- openapigen bakes those comments into the generated schema's description field, so the committed frontend/src/generated/schemas.ts and openapi.json still had the old wording. codegen's git-diff-exit-code check caught it correctly. * fix(amneziawg): narrow 2 test fixtures that collided with MaxForwardedPorts TestCheckForwardedPortsConflict_CollidesWithEnabledInboundPort and ..._NoCollisionWhenPortsDontOverlap used "8000-8100"/"9000-9100" as their ForwardedPorts fixture -- 101 ports each, one over MaxForwardedPorts (100). The cap check (checkForwardedPortsConflict, added this session alongside the SOCKS-phantom-port check) fires first, so both tests got "more than 100 forwarded ports" instead of ever reaching the collision logic they're actually testing. The cap itself has its own dedicated boundary test already; these two just needed a narrower range that still covers/misses port 8080 as intended -- 8075-8085 and 9075-9085, 11 ports each. * fix(amneziawg): checkAmneziawgnetSocksConflict had no receiver in its new home My merge-conflict resolution kept this as a method call (s.checkAmneziawgnetSocksConflict) inside checkPortConflictTx, a plain function with no *InboundService receiver -- upstream's #6225 fix moved the port-conflict check out of the (s *InboundService) method and into this new tx-scoped free function, and I didn't notice the call site needed to change shape too. CI caught it immediately (undefined: s); nothing in this specific package can be locally verified past internal/database's own unrelated, pre-existing CGO build issue on this dev machine. Since the signature had to change either way, folded in the fix already flagged as a separate follow-up: checkAmneziawgnetSocksConflict now takes the caller's db handle instead of fetching its own via database.GetDB(), so it actually runs inside the same serialized transaction #6225 introduced -- previously it sat right next to that race fix without benefiting from it. * fix: address the review findings on the embedded AmneziaWG PR 5 blocking findings: - Floor S3/S4 at 12 in both obfuscation generators (Go and frontend) and reject a hand-edited value below that when HeaderProtectionKey is set -- IpcSet requires it, and ~39% of previously-generated sets violated it silently. - Guard PrivateKey/PrimaryDNS/SecondaryDNS/remark against newline injection in the AmneziaWG .conf builder (both the Go subscription-link path and the frontend downloadable-config path) -- unguarded, any of them could inject an arbitrary config line into a subscriber's client. - Bound the derived AmneziaWG SOCKS relay port to <= 65535 once an inbound's id is known, and check the reverse direction (does the relay port collide with an existing inbound's port) on both create and update -- previously only port -> relay collisions were checked, not relay -> port. - Gate injectAmneziawgV6Egress on the same V6AliasesActive predicate desiredV6Aliases already uses, so the two can't disagree about whether a peer's IPv6 identity is actually active at the OS level. 2 minor findings: - Fix the forwarded-ports cap check's off-by-one (a spec covering exactly the cap was rejected as if it were over it). - Correct docker-compose.yml's stale comment describing the retired DKMS/kernel-module architecture. * chore: retrigger CI build (armv5) failed on a transient Go module proxy network error (INTERNAL_ERROR stream reset on sagernet/sing), unrelated to this PR's changes. * docs: fix doc comments still describing the retired DKMS/awg-quick design A few doc comments (and one illustrative test log line) survived the embedded-architecture cutover unchanged and now contradict the code they sit next to: - internal/amneziawg/types.go's package comment claimed this package still owns a Manager that reconciles OS-level interfaces via awg-quick/DKMS -- that Manager was removed; the reconcile loop lives in internal/amneziawgnet now, and this package is protocol-shape-only. - internal/amneziawg/params.go's ValidateObfuscation/ValidateConfigValue comments cited "awg-quick up" / "awg-quick executes as root" as the reason to validate -- the server itself never calls awg-quick in this architecture; the same value still reaches a real rendered .conf that a client app or an admin's own awg-quick CLI applies downstream, so the validation is still warranted, just for a different consumer. Mirrored the same fix in inbound_amneziawg.go's matching comment and its test's comment. - internal/amneziawgnet/manager.go's Manager doc comments (x3) pointed readers at "internal/amneziawg.Manager" for comparison -- that type no longer exists in this diff at all. Repointed at internal/mtproto.Manager, the pattern this was actually modeled on and the one that's still real. - Swapped one test's illustrative "awg-quick up awg2 failed" log line for a message shaped like this architecture's actual amneziawgnet logging, so a reader skimming the test doesn't wonder whether the server still shells out to awg-quick. No behavior change. * fix(docs): re-run codegen for xray-settings.mdx after conflict merge The automated conflict-resolution hand-merge for this generated file was content-correct but didn't byte-match a real regen (different YAML long-string folding style). Re-ran npm run gen + docs' gen:api and kept that canonical output instead. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> * fix(amneziawg): drop the dead access-log email backfill amneziawgEmailIndex keyed peers by "<tag>|<tunnel IP>", a scheme built for the retired TPROXY bridge where the peer's decapsulated tunnel address survived as the access log's from-address. The embedded architecture relays through a loopback SOCKS5 dial, so every AmneziaWG log line's from-address is 127.0.0.1:<ephemeral> and the lookup could never match: the index was rebuilt on every log view just to miss. Remove the index, its GetXrayLogs wiring and its test. If per-line emails are wanted back, the relay would have to publish a local-port->email registry for the viewer to resolve loopback sources. * fix(api): generate AmneziaWGLogs/PeerActivity schemas instead of hand-writing them The amneziawglogs endpoint's response structs were missing from openapigen's StructAllow, so they were silently absent from every generated schema/example, the endpoints.ts entry carried a hand-written response, and AmneziaWGLogModal.tsx duplicated the shapes as local interfaces - the exact drift the allowlist rule exists to prevent. Allowlist both structs with example tags, point the endpoint at the generated schema, import the generated types in the modal, and sync docs/public/openapi.json. * chore(amneziawg): drop the unreferenced quiccapture package Nothing imports internal/amneziawg/quiccapture and no route exposes it; its package doc justifies the code as a port of frontend/src/lib/xray/i1Generators.ts, which does not exist in this repository, and promises an API round-trip that also does not exist. 1,110 lines of unreachable code with misleading provenance claims. Revert this commit to bring the package back when the live-capture I1 feature and its frontend counterpart actually land. * fix(clients): re-run cross-inbound conflict checks on the serialized writer The new client-level checks - cross-inbound AllowedIPs collisions and AmneziaWG forwardedPorts conflicts - read a fresh DB snapshot, decide, and only then enter runSerializedTx, while lockInbound only serializes writers on the SAME inbound. Two concurrent client creates on two different tunnel inbounds both passed the read and both committed, yielding two peers with one address: the exact check-then-claim race 81cfd857 (#6225) closed for AddInbound, which this PR's own checkAmneziawgnetSocksReverseConflict already cites. Keep the pre-tx pass for fail-fast UX and re-validate inside the transaction, where the single writer makes the answer authoritative. The race test drives two goroutines at two inbounds and demands exactly one winner; it fails with committed=2 when the in-tx re-check is removed. * fix(amneziawg): hot-apply depletion disables like mtproto does applyTrafficMutationBatch special-cases MTProto so a quota/expiry depletion cuts the sidecar immediately, but AmneziaWG fell through to runtime AddUser/RemoveUser - explicit no-ops for this protocol - so a depleted peer kept tunneling until the next 10s reconcile tick. Route it through applyLocalAmneziaWG, whose own contract (re-read committed settings, filter depleted clients, push to the interface) is exactly this case; the comment claiming it mirrors applyLocalMtproto is now true for the depletion path too. * fix(amneziawg): persist cleared DNS fields instead of resurrecting defaults PrimaryDNS/SecondaryDNS marshaled with omitempty, so clearing them persisted settings with no key at all - and the frontend re-parses stored settings through a Zod schema whose .default('8.8.8.8') / .default('8.8.4.4') fire on missing keys, silently repopulating the form on every load and re-persisting the defaults on the next save. Blank is a documented, meaningful state (no DNS line in client configs); drop omitempty so a cleared value survives the round-trip. The regression test normalizes a server block with cleared DNS and fails when the keys are dropped. * fix(amneziawg): accept cleared numeric obfuscation/subnet fields in the form AntD InputNumber emits null when cleared, Zod .default() only replaces undefined, and unlike wireguard.ts - whose optionalClearedInt comment documents exactly this failure mode - the AmneziaWG schema declared subnetCidr and jc/jmin/jmax/s1-s4 as bare z.number() defaults. Clearing any of the eight fields made safeParse reject the null and block the save until the user retyped a value. Absorb null into undefined while keeping each field's schema default, so a cleared field refills its documented default and legacy blobs with absent keys behave as before. * fix(amneziawg): guard the third .conf emitter against newline injection The review-round fix added the newline guard to amneziaWGConfigText (Go) and buildAmneziaWGClientConfig, but genAmneziaWGConfig in inbound-link.ts - the third of the three emitters its own comment says must not drift - still rendered privateKey/primaryDns/secondaryDns/remark unescaped, so a newline there injected a config line (e.g. a rogue PostUp) into the inbound form's downloaded .conf. Add the same guard, plus the regression tests the original fix shipped without: all four fields on the Go and both frontend emitters go red if any guard is removed. * test(amneziawg): pin the S3/S4 floors the TS drift guard claims to mirror The test's docstring says it mirrors internal/amneziawg/params_test.go, but it asserted S3>=8/S4>=4 while the Go test and both generators pin 12/12 - the floor ValidateObfuscation enforces whenever a header protection key is set, which this generator always sets. A regression narrowing the TS floors into 8-11/4-11 would have passed the drift guard and produced configs the backend rejects on save. * docs: restore the pia repo-map entry and document the AmneziaWG subsystem Merging main dropped CLAUDE.md's internal/pia/ bullet (added by #6272) while resolving the repo-map conflict - the package itself is untouched. Restore it, add the missing map entries for the two packages this branch introduces (internal/amneziawg/, internal/amneziawgnet/), bump the cron count, and give amneziawg_job its row in architecture.md's 5.4 table. * chore(amneziawg): correct comments stranded by the architecture pivot ae77c7e9's cutover to the embedded gVisor path deleted the kernel-module code but left several comments describing it in the present tense: hot_diff.go cited the removed service.amneziawgEgressStreamSettings and wrongly claimed AmneziaWG is the only sockopt.tproxy source (tunnel's TProxy mode is the live one the guard protects), socks_config.go pointed at the deleted EgressBasePort/EgressPortForInbound, manager.go referred to the deleted Manager and its fingerprinting as live code, web.go's cron registration claimed the job scrapes traffic (its own doc says it does not), and types.go capped ContentPaddingAddition at uint16 when validation and upstream both use uint32. * style(lint): satisfy gofumpt/goimports so make verify is green json_service.go's two 'Tag: "proxy"}' literals came in with main's own cc245a90 formatting commit and fail the repo's gofumpt gate for everyone; the import grouping in inbound_amneziawg.go is from the serialized-writer fix on this branch. --------- Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com> Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com> Co-authored-by: claude[bot] <41898282+claude[bot]@users.noreply.github.com>
2026-08-23 17:41:15 -07:00
gvisor.dev/gvisor v0.0.0-20260122175437-89a5d21be8f0
Test-quality audit: fix 2 prod bugs, strengthen weak tests, add mutation/fuzz/CI tooling (#5345) * test(audit): add gremlins/rapid/coverage tooling + AUDIT.md scaffold * test(audit): hygiene sweep (race-clean except logger global; Finding #2) + smell inventory * test(audit): cover untested error/edge branches (TLS proxy+pin, migration tag cleanup=Finding #1) * test(audit): strengthen internal/sub link tests (dedup key, TLS/Reality mapping, clash well-formedness) * test(audit): property (rapid) + fuzz tests for joinHostPort/userinfo/pin/ParseLink * test(audit): tighten frontend subSortIndex rejection assertions + wire coverage * ci(audit): add shuffle gate + non-blocking race job (Finding #2) + fuzz-smoke; document mutation policy * chore(audit): gitignore frontend coverage output * test(audit): exhaustive whole-repo pass — strengthen 5 weak/fake tests (netproxy, CSP, modal per-protocol loops, schema coercions) * docs(contributing): add Testing section (conventions, race/shuffle, fuzz, mutation policy); drop AUDIT.md ledger * fix(logger,migration): guard logBuffer with mutex; execute legacy tag cleanup (tx.Exec); make CI race gate blocking * ci(mutation): add nightly scoped gremlins workflow (informational artifacts) * test(audit): strengthen runtime tests — baseURL scheme/port bounds, isNonEmptySlice, trafficReset * test(audit): strengthen clash tests — reality field mapping + tcp-header validation * test(audit): runtime — egress-proxy + content-type tests; drop redundant bp=='' branch * test(audit): strengthen link parser/helper tests (defaultPort, splitComma, base64, canonicalQuery, tls/reality/transport mapping) * test(audit): strengthen sub/xray/common/netsafe/mtproto/config/middleware tests (kill surviving mutants) * test(audit): raise timeout on protocol-iteration modal tests (heavy re-renders, slow on CI) * fix(logger): GetLogs returns at most c entries (off-by-one fix; addresses PR review) * perf(logger): snapshot logBuffer under lock so GetLogs doesn't block logging; clarify fuzz-seed docs (addresses PR review)
2026-06-15 06:17:03 -07:00
pgregory.net/rapid v1.3.0
2023-02-09 11:18:06 -08:00
)
require (
github.com/Azure/go-ntlmssp v0.1.1 // indirect
github.com/andybalholm/brotli v1.2.6 // indirect
github.com/bytedance/gopkg v0.1.4 // indirect
github.com/bytedance/sonic v1.15.4 // indirect
github.com/bytedance/sonic/loader v0.5.2 // indirect
github.com/cloudflare/circl v1.6.5 // indirect
2026-05-04 07:40:50 -07:00
github.com/cloudwego/base64x v0.1.7 // indirect
github.com/ebitengine/purego v0.11.1 // indirect
chore: refresh dependencies, fix Linux tool tasks, modernize Go idioms Frontend deps: @hookform/resolvers 5.4.0 -> 5.4.3 and react-hook-form 7.82.0 -> 7.83.0. The @typeschema/valibot override is what makes this installable at all. Resolvers 5.4.3 re-declares 25 optional peers for its validator matrix, and npm resolves them into the ideal tree even though none are used here; two of them contradict, since resolvers wants valibot ^1 while @typeschema/main -> @typeschema/valibot pins valibot ^0.39. Both target the same node_modules/valibot, so a plain npm update dies with ERESOLVE. The override settles that one edge and nothing extra lands in node_modules. Backend deps: telego 1.10.0 -> 1.11.1 (Telegram Bot API v10.2, additive only), klauspost/compress 1.19.1, plus the indirect bumps that came with them. VS Code tasks: the golangci-lint and modernize tasks assumed Windows PATH semantics, where PATH is a persistent user variable that every process inherits, so ~/go/bin was always visible. On Linux that directory is exported from ~/.bashrc, which the non-interactive `bash -c` behind a task never sources, and both tasks failed with exit 127. Adds linux/osx option blocks that prepend the Go bin directories and leaves the Windows path untouched, plus tasks to install the two tools; those are split because go install rejects packages from different modules in one invocation. Go sources: modernize -fix output, covering range-over-int, slices.Backward, maps.Copy, strings.CutPrefix and strings.SplitSeq. Behaviour is unchanged.
2026-07-25 07:08:09 -07:00
github.com/gabriel-vasile/mimetype v1.4.15 // indirect
github.com/gin-contrib/sse v1.1.2 // indirect
github.com/go-asn1-ber/asn1-ber v1.5.8 // indirect
2023-08-26 09:50:21 -07:00
github.com/go-ole/go-ole v1.3.0 // indirect
github.com/go-playground/locales v0.14.2 // indirect
github.com/go-playground/universal-translator v0.18.2 // indirect
2024-08-27 00:37:07 -07:00
github.com/google/btree v1.1.3 // indirect
2024-01-09 05:43:18 -08:00
github.com/gorilla/context v1.1.2 // indirect
github.com/gorilla/securecookie v1.1.2 // indirect
2024-08-27 00:37:07 -07:00
github.com/gorilla/sessions v1.4.0 // indirect
github.com/grbit/go-json v0.11.0 // indirect
github.com/huin/goupnp v1.3.0 // indirect
Feat/multi inbound clients (#4469) * feat(clients): add shadow tables for first-class client promotion Introduces three new GORM-backed tables (clients, client_inbounds, inbound_fallback_children) and a populate-only seeder that backfills them from each inbound's existing settings.clients JSON. Duplicate emails across inbounds auto-merge under one client row, with each field conflict logged. Existing services are unchanged and continue reading from settings.clients — this commit is groundwork only. * feat(clients): make clients+client_inbounds the runtime source of truth Adds ClientService.SyncInbound that reconciles the new tables from each inbound's clients list whenever existing service paths mutate settings.clients. Wires it into AddInbound, UpdateInbound, AddInboundClient, UpdateInboundClient, DelInboundClient, DelInboundClientByEmail, DelDepletedClients, autoRenewClients, and the timestamp-backfill path in adjustTraffics, plus DetachInbound on DelInbound. GetXrayConfig now builds settings.clients from the new tables before writing config.json, and getInboundsBySubId joins through them instead of JSON_EACH on settings JSON. Live Xray config and subscription endpoints are now driven by the relational view; settings.clients JSON stays in step as a side effect of every write. * feat(clients): add top-level Clients tab and CRUD API Adds /panel/api/clients endpoints (list, get, add, update, del, attach, detach) backed by ClientService methods that orchestrate the per-inbound Add/Update/Del flows so a single client row is created once and attached to many inbounds in one operation. The frontend gains a dedicated Clients page (frontend/clients.html + src/pages/clients/) with an AntD table, multi-inbound attach modal, and full CRUD. Axios interceptor learns to honour Content-Type: application/json so the JSON endpoints work alongside the legacy form-encoded ones. The legacy per-inbound client modal stays untouched in this PR — both flows now write to the same source of truth. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(inbounds): add Port-with-Fallback inbound type Adds a new "portfallback" protocol that emits as a VLESS-TLS inbound under the hood but is paired with a sidecar table of child inbounds. Panel auto-builds settings.fallbacks at Xray-config-gen time from the sidecar — each child's listen+port becomes the fallback dest, with SNI/ALPN/path/xver match criteria pulled from the row. No more typing loopback ports by hand or keeping settings.fallbacks in sync. Backend: new FallbackService (Get/SetChildren, BuildFallbacksJSON); two new routes (GET/POST /panel/api/inbounds/:id/fallbackChildren); xray.GetXrayConfig injects fallbacks for PortFallback inbounds; the inbound model emits protocol="vless" so Xray accepts the config. Frontend: PORTFALLBACK joins the protocol dropdown; selecting it shows the standard VLESS controls plus a Fallback Children table (inbound picker + per-row SNI/ALPN/path/xver). Children are loaded on edit and replaced atomically on save. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(clients): add Reset Traffic, QR Code, Info actions + Online/Remaining columns The Clients page table gains: - Online column — green/grey tag driven by /panel/api/inbounds/onlines, polled every 10s. - Remaining column — bytes-remaining tag, coloured green/orange/red against quota, purple infinity when unlimited. - Action icons per row: QR, Info, Reset traffic, Edit, Delete. ClientInfoModal shows the full client detail (uuid/password/auth, traffic ↑/↓ + remaining + all-time, expiry absolute + relative, attached inbounds chip list, online + last-online). ClientQrModal fetches links for the client's subId via /panel/api/inbounds/getSubLinks/:subId and renders each one through the existing QrPanel component. Reset Traffic confirms then calls the existing per-inbound endpoint on the client's first attached inbound (the traffic row is keyed on email globally, so any attached inbound resets the shared counter). Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(clients): expose Attached inbounds in edit mode The multi-select was gated on add-only, so editing a client had no way to change which inbounds it belonged to. The picker now shows in both modes, and on submit the modal diffs the picked set against the original attachedIds — additions go through the /attach endpoint, removals through /detach, both after the field update lands so the new attachments get the latest values. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(clients): unbreak template parsing + stale i18n keys - InboundFormModal: split the multi-line help string in the PortFallback section onto one line — Vue's template parser was bailing on Unterminated string constant because a single-quoted literal spanned two lines inside a {{ }} interpolation. - ClientInfoModal: t('disable') was missing at the root level, so vue-i18n returned the key path literally. Use t('disabled') which exists. - Linter cleanup elsewhere: pages.client.* references renamed to pages.clients.* to match the merged i18n block; whitespace normalisation in a few unrelated Vue templates. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * 1 Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * refactor(traffic): drop all-time traffic tracking Removes the AllTime field from Inbound and ClientTraffic and migrates existing DBs by dropping the all_time columns on startup. The counter duplicated up+down without adding signal, and the per-event accumulator ran on every traffic write. Frontend: drop the All-time column from the inbound list and the client-row table, the All-time row from the client info modal, and the All-Time Total Usage tile from the inbounds summary card. The allTimeTraffic/allTimeTrafficUsage i18n keys are removed across every locale. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(clients): mobile cards, multi-select, bulk add Adds the same row-card layout the inbounds page uses on mobile: the table is suppressed under the mobile breakpoint and each client renders as a compact card with a status dot, email, Info button, Enable switch, and overflow menu. All the per-client detail (traffic, remaining, expiry, attached inbounds, flow, created/updated, URL, subscription) opens through the existing info modal. Multi-select with bulk delete wires AntD row-selection on desktop and a per-card checkbox on mobile; a Delete (N) button appears in the toolbar when anything is selected. Bulk add reuses the five email-generation modes from the inbound bulk modal but takes a multi-inbound picker so one bulk run can attach to several inbounds at once. Submits client-by-client through the existing /panel/api/clients/add endpoint. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * refactor(inbounds): remove legacy per-inbound client UI Now that clients live as first-class rows attached to one or many inbounds, the per-inbound client UI on the inbounds page is dead weight — every client action either has a global equivalent on the Clients page or makes no sense in a many-to-many world. Deletes ClientFormModal, ClientBulkModal, CopyClientsModal, and ClientRowTable from inbounds/. Strips the matching emits, refs, handlers, and dropdown menu items from InboundList and InboundsPage, and removes the dead mobile expand-chevron state and the desktop expanded-row plumbing that drove the inline client table. The InboundFormModal Clients tab still works in add-mode (one inline client at inbound creation) — that flow goes through ClientService. SyncInbound on save and remains useful. Fixes a stray "</a-dropdown>" left over by an earlier toolbar edit in ClientsPage that broke the template parser. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(clients): add Delete depleted action Mirrors the legacy delDepletedClients action that lived under the inbounds page, but as a first-class /panel/api/clients/delDepleted endpoint backed by ClientService. The new path goes through ClientService.Delete for each depleted email, so the new clients + client_inbounds + xray_client_traffic tables stay consistent. Adds a danger-styled toolbar button on the Clients page (next to Reset all client traffic) with a confirm dialog and a toast reporting the deleted count. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * refactor(api): move every client-shaped endpoint off /inbounds onto /clients After the multi-inbound client migration, client state belongs to the client API surface, not the inbound one. Twelve routes that were crammed under /panel/api/inbounds/* now live where they belong, under /panel/api/clients/*. Moved (route, handler, doc): POST /clientIps/:email POST /clearClientIps/:email POST /onlines POST /lastOnline POST /updateClientTraffic/:email POST /resetAllClientTraffics/:id POST /delDepletedClients/:id POST /:id/resetClientTraffic/:email GET /getClientTraffics/:email GET /getClientTrafficsById/:id GET /getSubLinks/:subId GET /getClientLinks/:id/:email Their /clients/* counterparts are: POST /clients/clientIps/:email POST /clients/clearClientIps/:email POST /clients/onlines POST /clients/lastOnline POST /clients/updateTraffic/:email POST /clients/resetTraffic/:email (email-only, fans out) GET /clients/traffic/:email GET /clients/traffic/byId/:id GET /clients/subLinks/:subId GET /clients/links/:id/:email per-inbound resetAllClientTraffics and delDepletedClients are dropped entirely — the Clients page already exposes global Reset All Traffic and Delete depleted actions, and per-inbound resets are meaningless once a client can be attached to many inbounds. ClientService.ResetTrafficByEmail is the new email-only reset path: it looks up every inbound the client is attached to and pushes the counter reset + Xray re-add through inboundService.ResetClientTraffic for each one, so depleted users come back online instantly. Frontend callers (ClientsPage, useClients, ClientQrModal, ClientInfoModal, InboundInfoModal, InboundsPage, useInbounds) all switched to the new paths. The Inbounds page drops its per-inbound "Reset client traffic" and "Delete depleted clients" dropdown items — users do those at the client level now. api-docs is rebuilt to match. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * refactor(service): switch tgbot + ldap callers to ClientService Adds two thin helpers to ClientService (CreateOne, DetachByEmail) and rewrites tgbot.SubmitAddClient and ldap_sync_job to call ClientService directly. Removes the JSON-blob payloads (BuildJSONForProtocol output for add, clientsToJSON/clientToJSON helpers) that callers previously fed to InboundService.AddInboundClient/DelInboundClient. ldap_sync_job.batchSetEnable now loops InboundService.SetClientEnableByEmail per email instead of trying to coerce AddInboundClient into doing the update — the old path would have failed duplicate-email validation for existing clients anyway. The legacy InboundService.AddInboundClient/UpdateInboundClient/ DelInboundClient methods stay in place; they are now only used internally by ClientService Create/Update/Delete/Attach. Inlining + deleting them follows in a separate commit. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * refactor(service): move all client mutation methods to ClientService Moves the client mutation surface out of InboundService and into ClientService. These methods all operate on a single client (identity fields, traffic limits, expiry, ip limit, enable state, telegram tg id) and didn't belong on the inbound aggregate. Moved (12 methods): AddInboundClient, UpdateInboundClient, DelInboundClient, DelInboundClientByEmail, checkEmailsExistForClients, SetClientTelegramUserID, checkIsEnabledByEmail, ToggleClientEnableByEmail, SetClientEnableByEmail, ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail, ResetClientTrafficLimitByEmail. Each method now takes an explicit *InboundService for the helpers that legitimately stay on InboundService (GetInbound, GetClients, runtimeFor, AddClientStat / UpdateClientStat / DelClientStat, DelClientIPs / UpdateClientIPs, emailUsedByOtherInbounds, getAllEmailSubIDs, GetClientInboundByEmail / GetClientInboundByTrafficID, GetClientTrafficByEmail). Stays on InboundService: ResetClientTrafficByEmail and ResetClientTraffic(id, email) — these mutate xray_client_traffic rows, not client identity, so they're inbound-side bookkeeping. Callers updated: tgbot (6 calls), ldap_sync_job (1 call), InboundService internal (writeBackClientSubID, CopyInboundClients, AddInbound's email-uniqueness check), ClientService Create/Update/ Delete/Attach/Detach. Also removes a dead resetAllClientTraffics controller handler whose route was already gone after the previous /clients API migration. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * refactor(clients): finish migrating to ClientService + tidy IP routes Two related cleanups in the new /clients surface: 1. Move ResetAllClientTraffics (bulk-reset of xray_client_traffic + last_traffic_reset_time, with node-runtime propagation) from InboundService to ClientService. PeriodicTrafficResetJob now holds a clientService and calls j.clientService.ResetAllClientTraffics(&j.inboundService, id). The last client-mutation method on InboundService is gone. 2. Shorten redundantly-named routes/handlers under /panel/api/clients: - /clientIps/:email -> /ips/:email (handler getIps) - /clearClientIps/:email -> /clearIps/:email (handler clearIps) The "client" prefix was redundant inside the clients namespace. Frontend (InboundInfoModal) and api-docs updated to match. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(inbounds,clients): clean up inbound modal + enrich client modal Inbound modal rework (InboundFormModal.vue + inbound.js): - Drop the embedded Client subform in the Protocol tab. Multi-inbound clients are managed exclusively from the Clients page now; a fresh inbound is created with zero clients (settings constructors default to []) and the user attaches clients afterwards. - Hide the Protocol tab entirely when it has nothing to render (VMESS, Trojan without fallbacks, Hysteria). Auto-switches active tab to Basic when the tab disappears while focused. - Move the Security section (Security selector + TLS block with certs and ECH + Reality block) out of the Stream tab into its own Security tab, sharing the canEnableStream gate. Client modal additions (ClientFormModal.vue + ClientBulkAddModal.vue): - Flow select (xtls-rprx-vision / -udp443) appears only when the panel actually has a Vision-capable inbound (VLESS or PortFallback on TCP with TLS or Reality). Hidden otherwise, and cleared when it disappears. - IP Limit input is disabled when the panel-level ipLimitEnable setting is off, fetched into useClients alongside subSettings and threaded through ClientsPage to both modals. - Edit modal now shows an "IP Log" section listing IPs that have connected with the client's credentials, with refresh and clear buttons (calls the renamed /panel/api/clients/ips and /clearIps endpoints). Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * refactor(inbounds): drop manual Fallbacks UI from inbound modal The PortFallback protocol type now covers the common VLESS-master-plus-children case with auto-wired dests, so the manual Fallbacks editor (showFallbacks block in the Protocol tab) is mostly redundant. Removed: - the v-if="showFallbacks" template block (SNI/ALPN/Path/dest/PROXY rows) - the showFallbacks computed - the addFallback / delFallback helpers - the .fallbacks-header / .fallbacks-title styles - the showFallbacks gate from hasProtocolTabContent (so Trojan-over-TCP no longer shows an empty Protocol tab) Power users who need a non-inbound fallback dest (nginx, static site) can still author settings.fallbacks via the Advanced JSON tab. * feat(clients,inbounds): move search/filter to Clients page + small fixes Search/filter relocation: - Remove the search/filter toolbar (search switch + filter radio + protocol/node selects + the visibleInbounds projection + inboundsFilterState localStorage + filter CSS + the SearchOutlined/ FilterOutlined/ObjectUtil/Inbound imports it required) from InboundList. The filters were all client-oriented buckets bolted onto the inbound row. - Add a search/filter toolbar to ClientsPage with the same shape: switch between deep-text search and bucket filter (active / deactive / depleted / expiring / online) + protocol filter that matches clients attached to at least one inbound with the chosen protocol. State persists in clientsFilterState localStorage. filteredClients drives both the desktop table and the mobile card list, and select-all / allSelected / someSelected only span the visible subset. - useClients now also fetches expireDiff and trafficDiff from /panel/setting/defaultSettings (used to detect the expiring bucket); ClientsPage threads them into the client-bucket helper. Loose fixes folded in: - Add Client: email field is auto-filled with a random handle on open, matching uuid/subId/password/auth. - Inbound clone: parse and reuse the source settings JSON (with clients reset to []) instead of building a fresh defaulted Settings, so VLESS Encryption/Decryption and other non-client fields survive the clone. - en-US.json: add the ipLog string used by the edit-client modal. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(clients): add Reverse tag field for VLESS-attached clients Mirrors the Flow field's pattern: a Reverse tag input appears in the Add/Edit Client modal whenever at least one selected inbound is VLESS or PortFallback. The value rides over the wire as client.reverse = { tag: '...' } so it lands directly in model.Client's *ClientReverse field; an empty value omits the reverse key entirely. On edit the field is hydrated from props.client.reverse?.tag, and the showReverseTag watcher clears the field if the user drops the last VLESS-like inbound from the selection. * fix(xray): emit only protocol-relevant fields per client entry The Xray config synthesizer was writing every identifier field (id, password, flow, auth, security/method, reverse) on every client entry regardless of the inbound's protocol. Xray ignores unknown fields, so the config worked, but it diverged from the spec and leaked secrets across protocols when one client was attached to multiple inbounds — a VLESS inbound's generated config carried the same client's Trojan password and Hysteria auth alongside its uuid. Switch on inbound.Protocol when building each entry: - VLESS / PortFallback: id, flow, reverse - VMess: id, security - Trojan: password, flow - Shadowsocks: password, method - Hysteria / Hysteria2: auth email is emitted for every protocol. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(clients): restore auto-disable kick under new schema disableInvalidClients still resolved (inbound_tag, email) pairs via JSON_EACH(inbounds.settings.clients), which is empty after migrating to the clients + client_inbounds tables. Result: xrayApi.RemoveUser never ran for depleted clients, clients.enable stayed true so the UI showed them as active, and only xray_client_traffic.enable got flipped - making "Restart Xray After Auto Disable" only half-work. Resolve the targets via a JOIN through the new schema, flip clients.enable so the Clients page reflects the state, and drop the legacy JSON write-back plus the subId cascade workaround (email is unique now). Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(clients): live WebSocket updates + Ended status surfacing ClientsPage now subscribes to traffic / client_stats / invalidate WebSocket events instead of polling /onlines every 10s. Per-row traffic counters refresh in place, online state stays current, and list-level mutations elsewhere trigger a refresh. The client roll-up summary moves from InboundsPage to ClientsPage where it belongs, restructured into six labeled stat tiles (Total / Online / Ended / Expiring / Disabled / Active) with email popovers on the ones with issues. Auto-disabled clients (traffic exhausted or expiry passed) now classify as 'depleted' even though clients.enable=false, so they show up under the Ended filter and render a red Ended tag instead of looking indistinguishable from an operator-disabled row. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(nodes): per-node client roll-up and panel version Added transient inboundCount / clientCount / onlineCount / depletedCount fields to model.Node, populated by NodeService.GetAll via aggregated queries (one join across inbounds + client_inbounds, one over client_traffics intersected with the in-memory online emails). The Nodes list renders these as colored chips on a new "Clients" column so an operator can see at a glance how many users each node carries and how many are currently online or depleted. Also exposes the remote panel's version. The central panel adds panelVersion to its /api/server/status payload (sourced from config.GetVersion). Probe reads that field and persists it on the node row, mirroring how xrayVersion already flows. NodesPage gets a new column next to Xray Version, in both desktop and mobile views, with English and Persian strings. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(clients): stop node sync from resurrecting deleted clients Several related issues around node-managed clients: - Remote runtime: drop the per-inbound resetAllClientTraffics path and point traffic/onlines/lastOnline fetches at the new /panel/api/clients/* routes. - Delete from master: always push the updated inbound to the node even when the client was already disabled or depleted, so the node actually loses the user instead of silently keeping it. - setRemoteTraffic: mirror remote clients into the central tables only on first discovery of a node inbound. Matched inbounds let the master own the join table, so a stale snap can no longer re-create a ClientRecord (and join row) for a client that was just deleted on the master. - ClientService.Delete: route through submitTrafficWrite so deletes serialize with node traffic merges, and switch the final ClientRecord delete to an explicit Where("id = ?") clause. - setRemoteTraffic UNIQUE-constraint fix: use clause.OnConflict on inserts and email-keyed UPDATEs for client_traffics, so mirroring a snap doesn't trip the unique email index. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * refactor(clients): switch client API endpoints from id to email All client-scoped routes now use the unique email as the path key (get, update, del, attach, detach, links). Email is the stable, protocol-independent identifier — UUIDs don't exist for trojan or shadowsocks, and internal numeric ids leaked panel implementation detail into the public API. Removed the redundant /traffic/byId/:id endpoint (covered by /traffic/:email) and collapsed /links/:id/:email into /links/:email, which now returns links across every attached inbound for the client. Frontend selection, bulk delete, and toggle state are now keyed by email as well, dropping the id→email lookup workaround. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * refactor(server): move cached state and helpers into ServerService ServerController had grown to hold its own status cache, version-list TTL cache, history-bucket whitelist, and the loop that drove all three — concerns that belong in the service layer. Pull them out: - lastStatus + the @2s refresh become ServerService.RefreshStatus and ServerService.LastStatus; the controller's cron now just orchestrates the cross-service side effects (xrayMetrics sample, websocket broadcast). - The 15-minute Xray-versions cache (with stale-on-error fallback) moves into ServerService.GetXrayVersionsCached, collapsing the controller handler to a single call. - The freedom/blackhole outbound-tag walk used by /xraylogs becomes ServerService.GetDefaultLogOutboundTags. - The allowed-history-bucket whitelist moves to package-level service.IsAllowedHistoryBucket, so both NodeController and ServerController validate against the same list. Net result: web/controller/server.go drops from 458 to 365 lines and contains only HTTP wiring + presentation-y side effects. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * refactor(api): emit JSON-text columns as nested objects Inbound, ClientRecord, and InboundClientIps store settings / streamSettings / sniffing / reverse / ips as JSON-text in the DB. The API was passing that text through verbatim, so every consumer had to JSON.parse a string inside a string. Add MarshalJSON / UnmarshalJSON so the wire format is a real nested object, while still accepting the legacy escaped-string shape on write. Frontend dbinbound.js gets a matching coerceInboundJsonField helper for the same dual-shape read path, and inbound.js toJson stops emitting empty/placeholder fields (externalProxy [], sniffing destOverride when disabled, etc.) so the new normalised JSON stays terse. api-docs and the inbound-clone path are updated to the new shape. Controller route lists are regrouped so all GETs sit above POSTs. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(clients): include inboundIds and traffic in /clients/list ClientRecord got its own MarshalJSON in the previous commit, and ClientWithAttachments embeds it to add inboundIds and traffic. Go promotes the embedded MarshalJSON to the outer struct, so the encoder was calling ClientRecord.MarshalJSON for the whole value and silently dropping the extras. The frontend reads row.inboundIds / row.traffic from /clients/list, so attached inbounds didn't render and newly added clients looked like they hadn't saved. Add an explicit MarshalJSON on ClientWithAttachments that splices the extras in. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(clients): gate IP Log on ipLimitEnable + clean access-log dropdown Legacy panel hid the IP Log section when access logging was off; the Vue 3 migration left it gated on isEdit only, so the section showed even when xray's access log was 'none' and nothing was being recorded. Restore the ipLimitEnable gate on the edit modal's IP Log form-item. While here, clean up the Xray Settings access-log dropdown: previously two 'none' entries appeared (an empty value labelled with t('none') and the literal 'none' from the options array). Drop the empty option for access log (the literal 'none' covers it) and relabel the empty option for error log / mask address to t('empty') so they're distinguishable. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(nodes): route per-client ops through node clients API + orphan sweep Adds Runtime methods AddClient, UpdateUser, and DeleteUser so master mutates clients on a node via /panel/api/clients/{add,update,del} rather than pushing the whole inbound. The previous rt.UpdateInbound path made the node DelInbound+AddInbound on every single-client change, briefly cycling every other user on the same inbound. DelInbound no longer filters by enable=true, so a disabled node inbound actually gets removed from the node instead of being resurrected by the next snap. setRemoteTrafficLocked now sweeps any ClientRecord with zero ClientInbound rows after SyncInbound rebuilds the attachments, which is how a node-side delete propagates back to master instead of leaving a detached ghost. ClientService.Delete tombstones the email first so a snap arriving mid-delete can't re-create the record. WebSocket broadcasts an "invalidate(clients)" message on every client mutation so the Clients page refreshes without manual reload. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(balancers): allow fallback on all strategies + feed burstObservatory from random/roundRobin Drops the random/roundRobin gate on the Fallback field in BalancerFormModal so every strategy can pick a fallback outbound. syncObservatories now feeds burstObservatory from leastLoad + random + roundRobin balancers (was leastLoad only), matching how leastPing feeds observatory. Fix the JsonEditor "Unexpected end of JSON input" that appeared when switching a balancer between leastPing and another strategy: the obsView watcher was gated on showObsEditor (a boolean OR of the two flags) and missed the case where one observatory swapped for the other in the same tick. Watch the individual flags instead so obsView flips to the surviving editor and the getter stops pointing at a deleted key. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(inbounds): use sortedInbounds for mobile empty-state check InboundList referenced an undefined visibleInbounds in the mobile card list's empty-state guard, throwing "Cannot read properties of undefined (reading 'length')" and breaking the entire mobile render. * feat(clients): sortable table columns Adds the same sortState / sortableCol / sortFns pattern InboundList uses, wrapping filteredClients in sortedClients so sort composes with the existing search/filter pipeline. Sortable: enable, email, inboundIds (attachment count), traffic, remaining, expiryTime; actions and online stay unsorted. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(shadowsocks): generate valid ss2022 keys and per-client method for legacy ciphers The Add Client flow on shadowsocks inbounds was producing xray configs that failed to start: - 2022-blake3-* ciphers need a base64-encoded key of an exact byte length per cipher. fillProtocolDefaults was assigning a uuid-style string, which xray rejects as "bad key". Now the password is generated (or replaced if invalid) via random.Base64Bytes(n) sized to the chosen cipher. - Legacy ciphers (aes-256-gcm, chacha20-*, xchacha20-*) require a per-client method field in multi-user mode; model.Client has no Method, so settings.clients was stored without one and xray failed with "unsupported cipher method:". applyShadowsocksClientMethod now injects the top-level method into each client on add/update, and healShadowsocksClientMethods backfills it at xray-config-build time so existing inbounds heal on the next start. - xray/api.go ssCipherType switch was missing aes-256-gcm, which fell through to ss2022 path. - SSMethods dropdown now offers aes-256-gcm. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(clients): preserve ClientRecord on inbound delete + filter Attached inbounds to multi-client protocols Replace the global orphan sweep in setRemoteTrafficLocked with a per-inbound diff cleanup: only delete a ClientRecord whose email disappeared from a snap-tracked inbound (i.e. a node-side delete). Inbounds that vanished entirely from the snap (e.g. admin deleted the inbound on master) aren't iterated, so a client whose last attachment came from that inbound is now left alone instead of being deleted alongside the inbound. ClientFormModal and ClientBulkAddModal now filter the Attached inbounds dropdown to protocols that actually support multiple clients: shadowsocks, vless, vmess, trojan, hysteria, hysteria2, and portfallback (which routes through VLESS settings). Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(clients): make empty-state text readable on dark/ultra themes The "No clients yet" empty state had a hardcoded black color (rgba(0,0,0,0.45)) that vanished against the dark backgrounds. Drop the inline color, let it inherit from the AntD theme, and fade with opacity like the mobile card empty state already does. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(clients): client-first tgbot add flow, tgId field, lightweight inbound options - tgbot: drop legacy per-protocol Add Client UI in favour of a client-first multi-inbound flow. New BuildClientDraftMessage / getInboundsAttachPicker let an admin pick one or more inbounds and submit a single client; per- protocol secrets are now generated server-side via fillProtocolDefaults. Drops awaiting_id/awaiting_password_tr/awaiting_password_sh state cases and add_client_ch_default_id/pass_tr/pass_sh/flow callbacks. Adds a setTGUser button + awaiting_tg_id state so the bot can set Client.TgID during Add. - clients UI: add Telegram user ID input to ClientFormModal (0 = none). Hide IP Limit field entirely when ipLimitEnable is off — disabled fields still take layout space, this collapses Auth(Hysteria) to full width. - inbounds API: new GET /panel/api/inbounds/options that returns just {id, remark, protocol, port, tlsFlowCapable}. Used by the clients page pickers so the dropdown payload stays small on panels with thousands of clients (drops settings JSON, clientStats, streamSettings). Server-side TlsFlowCapable mirrors Inbound.canEnableTlsFlow so the modal no longer needs to parse streamSettings client-side. - clientInfoMsg now shows attached inbound remarks, and getInboundUsages reports the attached client count per inbound. - api-docs: document the new /options endpoint and add tgId / flow to the clients add/update bodies. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(inbounds): keep Node column visible for node-attached inbounds The Node column was bound to hasActiveNode, so disabling every node hid the column even when inbounds were still attached to those nodes — the admin lost the visual cue that those inbounds belonged to a node and would come back when it was re-enabled. Combine hasActiveNode with a new hasNodeAttachedInbound check (any dbInbound with nodeId != null) so the column survives node-disable. * fix(api-docs): accept functional-component icons in EndpointSection AntD-Vue icons (SafetyCertificateOutlined, etc.) are functional components, so the icon prop's type: Object validator was rejecting them with a "Expected Object, got Function" warning at runtime. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * test: cover crypto, random, netsafe, sub helpers, xray equals, websocket hub, node service Adds ~110 unit tests across previously untested packages. Focus on pure-logic and concurrency surfaces where regressions would silently affect users: - util/crypto, util/random: password hashing round-trip, ss2022 key generation, alphabet/length invariants. - util/netsafe: IsBlockedIP edge cases, NormalizeHost validation, SSRF guard with AllowPrivate context bypass. - util/common, util/json_util: traffic formatter, Combine nil-skip, RawMessage empty-as-null and copy-on-unmarshal. - sub: splitLinkLines, searchKey/searchHost, kcp share fields, finalmask normalization, buildVmessLink round-trip. - xray: Config.Equals and InboundConfig.Equals field-by-field, getRequiredUserString/getOptionalUserString type checks. - web/websocket: hub registration, throttling, slow-client eviction, nil-receiver safety, concurrent register/unregister. - web/service: NodeService.normalize validation, normalizeBasePath, HeartbeatPatch.ToUI mapping. - web/job: atomicBool concurrent set/takeAndReset semantics. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * i18n(clients): replace English fallbacks with proper translation keys Pulls every hard-coded English label/title in the Clients page and its four modals through the i18n layer so localized panels stop leaking English. New keys live under pages.clients (auth, hysteriaAuth, uuid, flow, flowNone, reverseTag, reverseTagPlaceholder, telegramId, telegramIdPlaceholder, created, updated, ipLimit) plus refresh at the root and toasts.bulkDeletedMixed / bulkCreatedMixed for partial-failure toasts. Also switches the add-client modal's primary button from "Add" to "Create" for consistency with other create flows. The bulk-add Random/Random+Prefix/... email-method options stay hard-coded by request - they're identifier-shaped strings. * i18n: backfill 99 missing keys across all 12 non-English locales Brings every translation file up to parity with en-US.json so the Clients page, the fallback-children inbound section, the new refresh verb, the Nodes panel-version label and a handful of older holes stop falling through to the English fallback. New strings span: - pages.clients.* (labels, confirmations, toasts, emailMethods) - pages.inbounds.portFallback.* (Reality fallback inbound section) - pages.nodes.panelVersion, menu.clients, refresh Technical identifiers (Auth, UUID, Flow, Reverse tag) are intentionally left untranslated since they correspond to xray-core field names. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * i18n: drop stale pages.client block duplicated in every non-English locale Every non-English locale carried a pages.client (singular) section with 30 entries that duplicated pages.clients (plural). The plural namespace is what the Vue code actually consumes; the singular one was dead weight from an older rename that never got cleaned up in the non-English files. Removing it brings every locale to exactly 984 keys, matching en-US.json. * chore: apply modernize analyzer fixes across codebase Mechanical replacements suggested by golang.org/x/tools/.../modernize: strings.Cut/CutPrefix/SplitSeq, slices.Contains, maps.Copy, min(), range-over-int, new(expr), strings.Builder for hot += loops, reflect.TypeFor[T](), sync.WaitGroup.Go(), drop legacy //+build lines. * feat(database): add PostgreSQL as an optional backend alongside SQLite Lets operators with large client counts or multi-node setups pick PostgreSQL at install time without breaking the existing SQLite default. Backend is selected at runtime via XUI_DB_TYPE/XUI_DB_DSN, a small dialect layer keeps the five JSON_EXTRACT/JSON_EACH queries portable, and a new `x-ui migrate-db` subcommand copies SQLite data into PostgreSQL in FK-aware order. * fix(inbounds): gate node selector to multi-node-capable protocols Hide the Deploy-To selector and clear nodeId when switching to a protocol that can't run on a remote node. Also: - subs: return 404 (not 400) when subId matches no inbounds, so VPN clients distinguish "deleted/unknown" from a server error - hysteria link gen: use the inbound's resolved address so node-managed inbounds advertise the node host instead of the central panel - shadowsocks: default network to 'tcp' (udp was causing issues for some clients on first-create) - vite dev proxy: rewrite migrated-route bypass against the live base path instead of a hardcoded single-segment regex Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(clients): bulk add/delete correctness + perf, working pagination, delayed-start in form Bulk add/delete were serial on the frontend (one toast per call, N round-trips) and the backend race exposed by parallelizing them lost client attachments and hit UNIQUE constraint failed on client_inbounds. The single add/edit modal also had no Start-After-First-Use option, and the table never showed the delayed duration. Backend (web/service/client.go): - Per-inbound mutex on Add/Update/Del InboundClient so concurrent writers on the same inbound don't lose the read-modify-write of settings JSON. - SyncInbound skips create+join when the email is tombstoned so a concurrent maintenance pass (adjustTraffics, autoRenewClients, markClientsDisabledIn- Settings) that did a stale RMW can't resurrect a just-deleted client with a fresh id. - compactOrphans sweeps settings.clients entries whose ClientRecord no longer exists, applied in Add/DelInboundClient + DelInboundClientByEmail so each user-initiated mutation self-heals the inbound's settings. - DelInboundClient uses Pluck instead of First for the stats lookup so a missing row doesn't abort the delete with a noisy ErrRecordNotFound log. Frontend: - HttpUtil.{get,post} accept a silent option that suppresses the auto-toast. - ClientBulkAddModal fires creates in parallel + silent + one summary toast. - useClients.removeMany runs deletes in parallel + silent and refreshes once; ClientsPage bulk delete uses it and shows one aggregate toast. - useClients.applyInvalidate debounces 200 ms so the burst of N WebSocket invalidate events from the backend collapses into a single refresh. - ClientsPage pagination is reactive (paginationState ref + tablePagination computed); onTableChange persists page-size and page changes. - ClientFormModal gains a Start-After-First-Use switch + Duration days input alongside the existing Expiry Date picker; on edit-mode open a negative expiryTime is decoded back to delayed mode + days; on submit the payload sends -86400000 * days or the absolute timestamp. - ClientsPage table shows the delayed-start duration (blue tag Nd, tooltip Start After First Use: Nd) instead of infinity. - Telegram ID field in the form is hidden when /panel/setting/defaultSettings reports tgBotEnable=false; Comment then fills the row. - Form row 3 collapses UUID (span 12) + Total GB (span 8) + Limit IP (span 4) when ipLimitEnable is on, else UUID + Total GB at 12/12. - useInbounds.rollupClients counts only clients with a matching clientStats row, so orphans in settings.clients no longer inflate the inbound's count. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(windows): clean shutdown, working panel restart, harden kernel32 load Three Windows-specific issues addressed: 1. Orphaned xray-windows-amd64 after VS Code debugger stop. Delve's "Stop" sends TerminateProcess to the Go binary, which is uncatchable — our signal handlers never run, so xrayService.StopXray() is skipped and xray is left dangling. Spawn xray as a child of a Job Object with JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so the OS kills xray when our handle to the job is closed (which happens even on TerminateProcess). Also trap os.Interrupt in main so Ctrl+C in the terminal runs the graceful path. 2. /panel/setting/restartPanel logged "failed to send SIGHUP signal: not supported by windows" because Windows can't deliver arbitrary signals. Add a restart hook in web/global; main registers it to push SIGHUP into its own signal channel, and RestartPanel calls the hook before falling back to the (Unix-only) signal path. Same restart-loop code runs in both cases. 3. util/sys/sys_windows.go now uses windows.NewLazySystemDLL so the kernel32.dll resolve is pinned to %SystemRoot%\System32 (prevents DLL hijacking by a planted DLL next to the binary). Local filetime type replaced with windows.Filetime, and the unreliable syscall.GetLastError() fallback replaced with a type assertion on the errno captured at call time. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(sys): correct CPU/connection accounting on linux + darwin util/sys/sys_linux.go: - GetTCPCount/GetUDPCount were counting the column header row in /proc/net/{tcp,udp}[6] as a connection, inflating the reported total by 1 per non-empty file (so the panel status line always showed 2 more connections than actually existed). Replace getLinesNum + safeGetLinesNum with a single bufio.Scanner-based countConnections that skips the header. - CPUPercentRaw now opens HostProc("stat") instead of a hardcoded /proc/stat so HOST_PROC overrides apply, matching the connection counters in the same file. - Simplify CPU field unpacking: pad nums to 8 once instead of guarding every assignment with a len check. util/sys/sys_darwin.go: - Fix swapped idle/intr indices on kern.cp_time. BSD CPUSTATES order is user, nice, sys, intr, idle (CP_INTR=3, CP_IDLE=4) — gopsutil's cpu_darwin_nocgo.go reads the same layout. The previous code used out[3] as idle and out[4] as intr, so busy = total - dIdle was actually subtracting interrupt time, making the panel report CPU usage close to 100% on macOS regardless of actual load. - Collapse the per-field delta math into a single loop. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(xray): rotate crash reports into log folder, prevent overwrites writeCrashReport had two flaws: it wrote to the bin folder (alongside the xray binary) which conflates artifacts, and the second-precision timestamp meant a tight restart-loop crash burst overwrote prior reports. Write to the log folder with nanosecond precision and keep the last 10 reports. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * revert(inbounds): drop unreleased portfallback protocol The Port-with-Fallback inbound (commit 62fd9f9d) was confusing as a standalone protocol — fallbacks belong on a regular VLESS/Trojan TCP-TLS inbound, the way Xray models them natively. Rip out the entire feature cleanly (no migration needed since it was never released): protocol constant, fallback children DB table, FallbackService, 2 API endpoints, all UI rows, related translations and api-docs. A native fallback flow attached to VLESS/Trojan TCP-TLS/Reality will land in a follow-up commit. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(inbounds): native fallbacks on VLESS/Trojan TCP-TLS, with working child links A VLESS or Trojan inbound on TCP with TLS or Reality can now act as a fallback master: pick existing inbounds as children and the panel auto- fills the SNI / ALPN / path / xver routing fields from each child's transport, auto-builds settings.fallbacks at config-gen time, and rewrites the child's client-share link so it advertises the master's reachable endpoint and TLS state instead of the child's loopback listen. Layout matches the Xray All-in-One Nginx example: master at :443 with clients + TLS, each child on 127.0.0.1 with its own transport+clients. Order matters (Xray walks fallbacks top-to-bottom) — reorder via the per-row up/down arrows. Path / SNI / ALPN are exposed under a per-row Edit toggle for the rare cases where the auto-derivation needs overriding; otherwise just pick a child and you're done. Backend: new InboundFallback table + FallbackService (GetByMaster / SetByMaster / GetParentForChild / BuildFallbacksJSON); two routes (GET / POST /panel/api/inbounds/:id/fallbacks); xray.GetXrayConfig injects settings.fallbacks for any VLESS/Trojan TCP-TLS/Reality inbound; GetInbounds annotates each child with FallbackParent so the frontend can rewrite links without an extra round-trip. Link projection covers every emission path — clients-page QR/links, per-inbound Get URL, raw subscription, sub-JSON, sub-Clash, and the inbounds-page link/info/QR — via a shared projectThroughFallbackMaster on the backend and a shared projectChildThroughMaster on the frontend that both handle the panel-tracked relationship and the legacy unix-socket (@vless-ws) convention. Strings translated into all 12 non-English locales. * docs: rewrite CONTRIBUTING with full local-dev setup The prior three-line CONTRIBUTING left newcomers guessing at every non-trivial step: which Go / Node versions, where xray comes from, why the panel goes blank when XUI_DEBUG=true is flipped on, how the Vue multi-page setup is wired, what to do on Windows when go build trips on the CGo SQLite driver. Now covers prerequisites, MinGW-w64 install on Windows (niXman builds or MSYS2), one-shot first-time setup, two frontend dev workflows with the XUI_DEBUG asset-cache gotcha called out, the architecture and conventions of the Vue side, a project-layout map, useful env vars, and the PR checklist. ---------
2026-05-19 03:16:42 -07:00
github.com/jackc/pgpassfile v1.0.0 // indirect
github.com/jackc/pgservicefile v0.0.0-20240606120523-5a60cdf6a761 // indirect
github.com/jackc/puddle/v2 v2.2.2 // indirect
github.com/jackpal/go-nat-pmp v1.1.0 // indirect
2023-02-09 11:18:06 -08:00
github.com/jinzhu/inflection v1.0.0 // indirect
github.com/jinzhu/now v1.1.5 // indirect
github.com/json-iterator/go v1.1.12 // indirect
2025-07-02 02:17:26 -07:00
github.com/juju/ratelimit v1.0.2 // indirect
feat(xray): update xray-core to v26.7.11 and adapt panel Bump xtls/xray-core to 50231eaf (v26.7.11) and the three binary pins (DockerInit.sh, release.yml x2) in lockstep. Adapt the panel to the upstream changes: - Shadowsocks "none"/"plain" and VMess "none"/"zero" were removed from the core. A migration rewrites stored none/plain SS methods to a supported cipher and none/zero VMess security to "auto" (on both the clients column and inbound settings JSON); the SS build-time heal does the same so a row injected after boot cannot brick startup. The removed values are dropped from every frontend option list, schema and adapter, and coerced to "auto" at the Go link/sub/Clash emit sites and both link importers. Fix the CipherType_NONE sentinel that no longer compiles. - Unencrypted vless/trojan outbounds to a public address are now refused by the core. Validate outbounds through the vendored config loader when saving the xray template and when storing/merging outbound subscriptions, so one such outbound cannot keep the core from starting. - New TCP finalmask type "xmc" (Minecraft mimicry): add it to the sub link allowlist, the frontend enum and the FinalMask form (hostname, usernames, required password), and document it. - streamSettings gained a "method" alias for "network"; canonicalize it to "network" at inbound save time and in the form adapters/schema so a method-keyed config keeps its transport. - New root "env" config key is passed through xray.Config, compared in Equals, and forces a restart in the hot diff. - REALITY now defaults minClientVer to 26.3.27; update the form placeholder.
2026-07-11 15:30:47 -07:00
github.com/klauspost/cpuid/v2 v2.4.0 // indirect
github.com/koron/go-ssdp v0.9.1 // indirect
chore: refresh dependencies, fix Linux tool tasks, modernize Go idioms Frontend deps: @hookform/resolvers 5.4.0 -> 5.4.3 and react-hook-form 7.82.0 -> 7.83.0. The @typeschema/valibot override is what makes this installable at all. Resolvers 5.4.3 re-declares 25 optional peers for its validator matrix, and npm resolves them into the ideal tree even though none are used here; two of them contradict, since resolvers wants valibot ^1 while @typeschema/main -> @typeschema/valibot pins valibot ^0.39. Both target the same node_modules/valibot, so a plain npm update dies with ERESOLVE. The override settles that one edge and nothing extra lands in node_modules. Backend deps: telego 1.10.0 -> 1.11.1 (Telegram Bot API v10.2, additive only), klauspost/compress 1.19.1, plus the indirect bumps that came with them. VS Code tasks: the golangci-lint and modernize tasks assumed Windows PATH semantics, where PATH is a persistent user variable that every process inherits, so ~/go/bin was always visible. On Linux that directory is exported from ~/.bashrc, which the non-interactive `bash -c` behind a task never sources, and both tasks failed with exit 127. Adds linux/osx option blocks that prepend the Go bin directories and leaves the Windows path untouched, plus tasks to install the two tools; those are split because go install rejects packages from different modules in one invocation. Go sources: modernize -fix output, covering range-over-int, slices.Backward, maps.Copy, strings.CutPrefix and strings.SplitSeq. Behaviour is unchanged.
2026-07-25 07:08:09 -07:00
github.com/leodido/go-urn v1.5.0 // indirect
feat(xray): update xray-core to v26.9.8 and adapt panel Bump xtls/xray-core to 37ceb8b4b6 (v26.9.8) and the three binary pins (DockerInit.sh, release.yml Linux + Windows) in lockstep. No deleted symbols; the impact is entirely on the JSON config surface. Outbound "proxySettings" is now refused by the config loader (moved to streamSettings.sockopt.dialerProxy) and a freedom outbound rejects sockopt.addressPortStrategy. Either key in a stored template would keep the core from starting after the upgrade, so a new OutboundRemovedKeysFix seeder rewrites xrayTemplateConfig once: proxySettings.tag becomes sockopt.dialerProxy (an existing dialerProxy wins) and addressPortStrategy is dropped from freedom outbounds. Template saves and outbound subscriptions already run through the vendored loader, so the new refusals surface there with the core's own message. REALITY no longer applies a built-in minClientVer (26.3.27) when the field is empty. The form placeholder and the min/max hints in all 13 locales now say that empty means no minimum. New upstream keys the Zod schemas would otherwise strip, with form support where a sibling field already had it: - blackhole response type "custom" with base64 customResponseData - realm finalmask ipMode (dual/v4/v6) and portMapping (UPnP / NAT-PMP) - quicParams brutalDisableLossCompensation, disableChromeParrot, disableGSO, disableStatelessReset - hysteria masquerade proxy xForwarded - wireguard outbound remoteDNS - routing rule localOS freedom.domainStrategy is only deprecated upstream (auto-migrated to sockopt.domainStrategy with a warning) and is left untouched.
2026-09-08 04:49:32 -07:00
github.com/libp2p/go-nat v1.0.1-0.20250821073202-01afc089f138 // indirect
github.com/libp2p/go-netroute v0.4.0 // indirect
github.com/lufia/plan9stats v0.0.0-20260802145828-341c2f0c90b5 // indirect
chore: refresh dependencies, fix Linux tool tasks, modernize Go idioms Frontend deps: @hookform/resolvers 5.4.0 -> 5.4.3 and react-hook-form 7.82.0 -> 7.83.0. The @typeschema/valibot override is what makes this installable at all. Resolvers 5.4.3 re-declares 25 optional peers for its validator matrix, and npm resolves them into the ideal tree even though none are used here; two of them contradict, since resolvers wants valibot ^1 while @typeschema/main -> @typeschema/valibot pins valibot ^0.39. Both target the same node_modules/valibot, so a plain npm update dies with ERESOLVE. The override settles that one edge and nothing extra lands in node_modules. Backend deps: telego 1.10.0 -> 1.11.1 (Telegram Bot API v10.2, additive only), klauspost/compress 1.19.1, plus the indirect bumps that came with them. VS Code tasks: the golangci-lint and modernize tasks assumed Windows PATH semantics, where PATH is a persistent user variable that every process inherits, so ~/go/bin was always visible. On Linux that directory is exported from ~/.bashrc, which the non-interactive `bash -c` behind a task never sources, and both tasks failed with exit 127. Adds linux/osx option blocks that prepend the Go bin directories and leaves the Windows path untouched, plus tasks to install the two tools; those are split because go install rejects packages from different modules in one invocation. Go sources: modernize -fix output, covering range-over-int, slices.Backward, maps.Copy, strings.CutPrefix and strings.SplitSeq. Behaviour is unchanged.
2026-07-25 07:08:09 -07:00
github.com/mattn/go-isatty v0.0.24 // indirect
github.com/miekg/dns v1.1.73 // indirect
2023-02-09 11:18:06 -08:00
github.com/modern-go/concurrent v0.0.0-20180306012644-bacd9c7ef1dd // indirect
github.com/modern-go/reflect2 v1.0.2 // indirect
github.com/molecule-man/go-brrr v1.1.1 // indirect
chore: refresh dependencies, fix Linux tool tasks, modernize Go idioms Frontend deps: @hookform/resolvers 5.4.0 -> 5.4.3 and react-hook-form 7.82.0 -> 7.83.0. The @typeschema/valibot override is what makes this installable at all. Resolvers 5.4.3 re-declares 25 optional peers for its validator matrix, and npm resolves them into the ideal tree even though none are used here; two of them contradict, since resolvers wants valibot ^1 while @typeschema/main -> @typeschema/valibot pins valibot ^0.39. Both target the same node_modules/valibot, so a plain npm update dies with ERESOLVE. The override settles that one edge and nothing extra lands in node_modules. Backend deps: telego 1.10.0 -> 1.11.1 (Telegram Bot API v10.2, additive only), klauspost/compress 1.19.1, plus the indirect bumps that came with them. VS Code tasks: the golangci-lint and modernize tasks assumed Windows PATH semantics, where PATH is a persistent user variable that every process inherits, so ~/go/bin was always visible. On Linux that directory is exported from ~/.bashrc, which the non-interactive `bash -c` behind a task never sources, and both tasks failed with exit 127. Adds linux/osx option blocks that prepend the Go bin directories and leaves the Windows path untouched, plus tasks to install the two tools; those are split because go install rejects packages from different modules in one invocation. Go sources: modernize -fix output, covering range-over-int, slices.Backward, maps.Copy, strings.CutPrefix and strings.SplitSeq. Behaviour is unchanged.
2026-07-25 07:08:09 -07:00
github.com/pelletier/go-toml/v2 v2.4.3 // indirect
github.com/pion/dtls/v3 v3.1.10 // indirect
github.com/pion/logging v0.2.4 // indirect
github.com/pion/stun/v3 v3.1.7 // indirect
github.com/pion/transport/v4 v4.1.1 // indirect
github.com/pion/transport/v5 v5.1.1 // indirect
feat(xray): update xray-core to v26.7.11 and adapt panel Bump xtls/xray-core to 50231eaf (v26.7.11) and the three binary pins (DockerInit.sh, release.yml x2) in lockstep. Adapt the panel to the upstream changes: - Shadowsocks "none"/"plain" and VMess "none"/"zero" were removed from the core. A migration rewrites stored none/plain SS methods to a supported cipher and none/zero VMess security to "auto" (on both the clients column and inbound settings JSON); the SS build-time heal does the same so a row injected after boot cannot brick startup. The removed values are dropped from every frontend option list, schema and adapter, and coerced to "auto" at the Go link/sub/Clash emit sites and both link importers. Fix the CipherType_NONE sentinel that no longer compiles. - Unencrypted vless/trojan outbounds to a public address are now refused by the core. Validate outbounds through the vendored config loader when saving the xray template and when storing/merging outbound subscriptions, so one such outbound cannot keep the core from starting. - New TCP finalmask type "xmc" (Minecraft mimicry): add it to the sub link allowlist, the frontend enum and the FinalMask form (hostname, usernames, required password), and document it. - streamSettings gained a "method" alias for "network"; canonicalize it to "network" at inbound save time and in the form adapters/schema so a method-keyed config keeps its transport. - New root "env" config key is passed through xray.Config, compared in Equals, and forces a restart in the hot diff. - REALITY now defaults minClientVer to 26.3.27; update the form placeholder.
2026-07-11 15:30:47 -07:00
github.com/pires/go-proxyproto v0.15.0 // indirect
github.com/power-devops/perfstat v0.0.0-20260916203055-22a1a467d9f0 // indirect
2025-12-03 14:45:11 -08:00
github.com/quic-go/qpack v0.6.0 // indirect
github.com/rogpeppe/go-internal v1.15.0 // indirect
github.com/tklauser/go-sysconf v0.4.0 // indirect
github.com/tklauser/numcpus v0.12.0 // indirect
2023-02-22 13:08:50 -08:00
github.com/twitchyliquid64/golang-asm v0.15.1 // indirect
github.com/ugorji/go/codec v1.3.2 // indirect
2023-05-14 08:20:01 -07:00
github.com/valyala/bytebufferpool v1.0.0 // indirect
2026-03-04 04:05:29 -08:00
github.com/valyala/fastjson v1.6.10 // indirect
2025-05-11 04:05:45 -07:00
github.com/vishvananda/netlink v1.3.1 // indirect
2024-11-11 13:59:03 -08:00
github.com/vishvananda/netns v0.0.5 // indirect
github.com/wlynxg/anet v0.0.5 // indirect
github.com/xtls/reality v0.0.0-20260921001439-3c98159dee38 // indirect
2024-03-10 23:29:52 -07:00
github.com/yusufpapurcu/wmi v1.2.4 // indirect
go.mongodb.org/mongo-driver/v2 v2.9.1 // indirect
go4.org/netipx v0.0.0-20260823151212-3075585bcbeb // indirect
golang.org/x/arch v0.31.0 // indirect
golang.org/x/exp v0.0.0-20260908205506-85c1c2202aba // indirect
golang.org/x/sync v0.23.0 // indirect
golang.org/x/time v0.16.0 // indirect
golang.zx2c4.com/wintun v0.0.0-20230126152724-0fa3db229ce2 // indirect
Frontend rewrite: React + TypeScript with AntD v6 (#4498) * chore(frontend): add react+typescript toolchain alongside vue Step 0 of the planned vue->react migration. React 19, antd 5, i18next + react-i18next, typescript 5, and @vitejs/plugin-react 6 are added as dev/runtime deps alongside the existing vue stack. Both frameworks coexist in the build until the last entry flips. * vite.config.js: react() plugin runs next to vue(); new manualChunks for vendor-react / vendor-antd-react / vendor-icons-react / vendor-i18next. Existing vue chunks unchanged. * eslint.config.js: typescript-eslint + eslint-plugin-react-hooks rules scoped to *.{ts,tsx}; vue config untouched for *.{js,vue}. * tsconfig.json: strict, jsx: react-jsx, moduleResolution: bundler, allowJs: true (lets .tsx files import the remaining .js modules during incremental migration), @/* path alias. * env.d.ts: Vite client types + window.X_UI_BASE_PATH typing + SubPageData shape consumed by the subscription page. Vite stays pinned at 8.0.13 per the existing project policy. No existing .vue/.js source files touched in this step. eslint-plugin-react (not -hooks) is not included because its latest release does not yet support ESLint 10. react-hooks/purity covers the safety-critical case; revisit when the plugin updates. * refactor(frontend): port subpage to react+ts Step 1 of the planned vue->react migration. The standalone subscription page (sub/sub.go renders the HTML host; React mounts into #app) is the first entry off vue. Introduces two shared pieces both entries (and future ones) will use: * src/hooks/useTheme.tsx — React Context + useTheme hook + the same buildAntdThemeConfig (dark/ultra-dark token overrides) and pauseAnimationsUntilLeave helper the vue version exposes. Same localStorage keys (dark-mode, isUltraDarkThemeEnabled) and DOM side effects (body.className, html[data-theme]) so the two stay in sync across the coexistence period. * src/i18n/react.ts — i18next + react-i18next loader that reads the same web/translation/*.json files via import.meta.glob. The vue-i18n setup in src/i18n/index.js is untouched and still serves the remaining vue entries. SubPage.tsx mirrors the vue version's behavior: reads window.__SUB_PAGE_DATA__ injected by the Go sub server, renders QR codes / descriptions / Android+iOS deep-link dropdowns, supports theme cycle and language switch. Uses AntD v5 idioms: Descriptions items prop, Dropdown menu prop, Layout.Content. * refactor(frontend): port login to react+ts Step 2 of the planned vue->react migration. The login entry is the first to exercise AntD React's Form API (Form + Form.Item with name/rules + onFinish) and the existing axios/CSRF interceptors under React. * LoginPage.tsx: same form fields, conditional 2FA input, rotating headline ("Hello" / "Welcome to..."), drifting blob background, theme cycle + language popover. Headline transition switches from vue's <Transition mode=out-in> to a CSS keyframe animation keyed off the visible word. * entries/login.tsx: setupAxios() + applyDocumentTitle() unchanged from the vue entry — both are framework-agnostic in src/utils and src/api/axios-init.js. useTheme hook, ThemeProvider, and i18n/react.ts loader introduced in step 1 are now shared across two entries; Vite extracts them as a small chunk in the build output. * refactor(frontend): port api-docs to react+ts Step 3 of the planned vue->react migration. The five api-docs files (ApiDocsPage, CodeBlock, EndpointRow, EndpointSection, plus the data-only endpoints.js) all move to react+ts. Also introduces components/AppSidebar.tsx — api-docs is the first authenticated page to need it. AppSidebar.vue stays in place for the six remaining vue entries (settings, inbounds, clients, xray, nodes, index); each gets switched to AppSidebar.tsx as its entry migrates. After the last entry flips, AppSidebar.vue is deleted. Notable transformations: * The scroll observer that highlights the active TOC link is a useEffect keyed on sections — re-registers whenever the visible set changes (search filter narrows it). Same behaviour as the vue watchEffect. * v-html="safeInlineHtml(...)" becomes dangerouslySetInnerHTML={{ __html: safeInlineHtml(...) }}. The helper still escapes everything except <code> tags. * JSON syntax highlighter in CodeBlock is unchanged — pure regex on the escaped string, then rendered via dangerouslySetInnerHTML. * endpoints.js stays as JS (allowJs in tsconfig); only the consumer signatures (Endpoint, Section) are typed at the React boundary. * AppSidebar reuses pauseAnimationsUntilLeave + useTheme from step 1. Drawer + Sider keyed off the same localStorage flag (isSidebarCollapsed) and DOM theme attributes the vue version uses, so the two stay in sync during coexistence. * refactor(frontend): port nodes to react+ts Step 4 of the planned vue->react migration. The nodes entry brings in the largest shared-infrastructure batch so far — every authenticated react page from here on can lean on these. New shared pieces (live alongside their .vue counterparts during coexistence): * hooks/useMediaQuery.ts — useState + resize listener * hooks/useWebSocket.ts — wraps WebSocketClient, subscribes on mount and unsubscribes on unmount. The underlying client is a single module-level instance so multiple components on the same page share one socket. * hooks/useNodes.ts — node list state + CRUD + probe/test, including the totals memo (online/offline/avgLatency) used by the summary card. applyNodesEvent is the entry point for the heartbeat-pushed list. * components/CustomStatistic.tsx — thin Statistic wrapper, prefix + suffix slots become props. * components/Sparkline.tsx — the SVG line chart with measured-width axis scaling, gradient fill, tooltip overlay, and per-instance gradient id from React.useId. ResizeObserver lifecycle is in useEffect; the math is unchanged. Pages: * NodesPage — wires hooks + WebSocket together, renders summary card + NodeList, hosts the form modal. Uses Modal.useModal() for the delete confirm so the dialog inherits ConfigProvider theming. * NodeList — desktop renders a Table with expandable history rows; mobile flips to a vertical card list whose actions live in a bottom-right Dropdown. The IP-blur eye toggle persists across both. * NodeFormModal — controlled form (useState object, single setForm per change). The reset-on-open effect computes the next state once and applies it with eslint-disable to satisfy the new react-hooks/set-state-in-effect rule on a legitimate pattern. * NodeHistoryPanel — polls /panel/api/nodes/history/{id}/{metric}/ {bucket} every 15s, renders cpu+mem sparklines side-by-side. * refactor(frontend): port settings to react+ts Step 5 of the planned vue->react migration. Settings is the first entry whose state model didn't translate to the Vue-style "parent passes a reactive object, children mutate it in place" pattern, so the React port flips it to lifted state + a typed updateSetting patch function. * models/setting.ts — typed AllSetting class with the same field defaults and equals() behavior the vue version had. The .js twin is deleted; nothing else imported it. * hooks/useAllSetting.ts — owns allSetting + oldAllSetting state, exposes updateSetting(patch), saveDisabled is derived via useMemo off equals() (no more 1Hz dirty-check timer). * components/SettingListItem.tsx — children-based wrapper instead of named slots. The vue twin stays alive because xray (BasicsTab, DnsTab) still imports it; deleted when xray migrates. The five tab components and the TwoFactorModal each accept { allSetting, updateSetting } and render with AntD v5's Collapse items[] API. Every v-model:value="x" became value={...} onChange={(e) => updateSetting({ key: e.target.value })} or onChange={(v) => updateSetting({ key: v })} for non-input controls. SubscriptionFormatsTab is the trickiest — fragment / noises[] / mux / direct routing rules are stored as JSON-encoded strings on the wire. Parsing them once via useMemo per field, mutating the parsed object on edit, and stringifying back into the patch keeps the round-trip identical to the vue version. SettingsPage hosts the tab navigation (with hash sync), the save / restart action bar, the security-warnings alert banner, and the restart flow that rebuilds the panel URL after the new host/port/cert settings take effect. * refactor(frontend): port clients to react+ts Step 6 of the planned vue->react migration. Clients is the biggest data-CRUD page in the panel (1.1k-line ClientsPage, 4 modals, full table + mobile card list, WebSocket-driven realtime traffic + online updates). New shared infra (lives alongside vue twins until inbounds migrates): * hooks/useClients.ts — clients + inbounds list, CRUD + bulk delete + attach/detach + traffic reset, with WebSocket event handlers (traffic, client_stats, invalidate) and a small debounced refresh on the invalidate event. State managed via setState; the live client_stats event merges traffic snapshots row-by-row through a ref to avoid stale closure issues. * hooks/useDatepicker.ts — singleton "gregorian"/"jalalian" cache with subscribe/notify so multiple components can read the panel's Calendar Type without re-fetching. Mirrors useDatepicker.js. * components/DateTimePicker.tsx — AntD DatePicker wrapper. vue3-persian-datetime-picker has no React port; the Jalali UI calendar is deferred (read-only Jalali display via IntlUtil formatDate still works). The vue twin stays for inbounds. * pages/inbounds/QrPanel.tsx — copy/download/copy-as-png QR helper shared between clients (qr modal) and inbounds (still on vue). Vue twin stays alive at QrPanel.vue. * models/inbound.ts — slim port: only the TLS_FLOW_CONTROL constant the clients form needs. The full inbound model stays as inbound.js for now; inbounds will pull it in as inbound.ts. The clients page itself uses Modal.useModal() for all confirm dialogs (delete, bulk-delete, reset-traffic, delDepleted, reset-all) so the dialogs render themed. Filter state persists to localStorage under clientsFilterState. Sort + pagination state is local; pageSize seeds from /panel/setting/defaultSettings. The four modals share a controlled "open/onOpenChange" pattern that replaces vue's v-model:open. ClientFormModal computes attach/detach diffs from the inbound multi-select on submit; the parent's onSave callback routes them through useClients's attach()/ detach() after the main update succeeds. ESLint config: turned off four react-hooks v7 rules (react-compiler, preserve-manual-memoization, set-state-in-effect, purity). They're all React-Compiler-driven informational rules; we don't run the compiler and the patterns they flag (initial-fetch useEffect, derived computations using Date.now, inline arrow event handlers) are all idiomatic React. Disabling globally instead of per-line keeps the diff readable. * refactor(frontend): port index dashboard to react+ts Step 7 of the Vue→React migration. Ports the overview/index entry: dashboard page, status + xray cards, panel-update / log / backup / system-history / xray-metrics / xray-log / version modals, and the custom-geo subsection. Adds the shared JsonEditor (CodeMirror 6) and useStatus hook used by the config modal. Removes the unused react-hooks/set-state-in-effect disables now that the rule is off globally. * refactor(frontend): port xray to react+ts Step 8 of the Vue→React migration. Ports the xray config entry: page shell, basics/routing/outbounds/balancers/dns tabs, the rule + balancer + dns server + dns presets + warp + nord modals, the protocol-aware outbound form, and the shared FinalMaskForm (TCP/UDP masks + QUIC params). Adds useXraySetting that mirrors the legacy two-way sync between the JSON template string and the parsed templateSettings tree. The outbound model itself stays in JS so the class-driven form keeps its existing mutation API; instance access is typed loosely inside the form to match. The shared FinalMaskForm.vue and JsonEditor.vue stay alongside the new .tsx versions until step 9 — InboundFormModal.vue still imports them. Adds react-hooks/immutability and react-hooks/refs to the already-disabled react-compiler rule set; both flag the outbound form's instance-mutation pattern that doesn't run through useState. * Upgrade frontend deps (antd v6, i18n, TS) Bump frontend dependencies in package.json and regenerate package-lock.json. Notable updates: upgrade antd to v6, update i18next/react-i18next, axios, qs, vue-i18n, TypeScript and ESLint, plus related @rc-component packages and replacements (e.g. classnames/rc-util -> clsx/@rc-component/util). Lockfile changes reflect the new dependency tree required for Ant Design v6 and other package upgrades. * refactor(frontend): port inbounds to react+ts and drop vue toolchain Step 9 — the last entry. Ports the inbounds entry: page shell, list with desktop table + mobile cards, info modal, qr-code modal, share-link helpers, and the protocol-aware form modal (basics / protocol / stream / security / sniffing / advanced JSON). useInbounds replaces the Vue composable with WebSocket-driven traffic + client-stats merge. Inbound and DBInbound models stay in JS so the class-driven form keeps its mutation API; instance access is typed loosely inside the form to match. FinalMaskForm/JsonEditor/TextModal/PromptModal/InfinityIcon are the last shared bits to flip; their .vue counterparts go too. Toolchain cleanup now that no entry needs Vue: drop plugin-vue from vite.config, remove the .vue lint block + parser, prune vue / vue-i18n / ant-design-vue / @ant-design/icons-vue / vue3-persian-datetime-picker / moment-jalaali override from package.json, and switch utils/index.js to import { message } from 'antd' instead of ant-design-vue. * chore(frontend): adopt antd v6 api updates Sweep deprecated props across the React tree: - Modal: destroyOnClose -> destroyOnHidden, maskClosable -> mask.closable - Space: direction -> orientation (or removed when redundant) - Input.Group compact -> Space.Compact block - Drawer: width -> size - Spin: tip -> description - Progress: trailColor -> railColor - Alert: message -> title - Popover: overlayClassName -> rootClassName - BackTop -> FloatButton.BackTop Also refresh dashboard theming for v6: rename dark/ultra Layout and Menu tokens (siderBg, darkItemBg, darkSubMenuItemBg, darkPopupBg), tweak gauge size/stroke, add font-size overrides for Statistic and Progress so the overview numbers stay legible under v6 defaults. * chore(frontend): antd v6 polish, theme + modal fixes - adopt message.useMessage hook + messageBus bridge so HttpUtil messages inherit ConfigProvider theme tokens - replace deprecated antd APIs (List, Input addonBefore/After, Empty imageStyle); introduce InputAddon helper + SettingListItem custom rows - fix dark/ultra selectors in portaled modals (body.dark, html[data-theme='ultra-dark']) instead of nonexistent .is-dark/.is-ultra - add horizontal scroll to clients table; reorder node columns so actions+enable sit at the left - swap raw button for antd Button in NodeFormModal test connection - fix FinalMaskForm nested-form by hoisting it outside OutboundFormModal's parent Form - fix advanced "all" JSON tab in InboundFormModal — useMemo on a mutated ref was stale; compute on every render - fix chart-on-open for SystemHistory + XrayMetrics modals by adding open to effect deps (useRef.current doesn't trigger re-runs) - switch i18next interpolation to single-brace {var} to match locale files - drop residual Vue mentions in CI workflows and Go comments * fix(frontend): qr code collapse — open only first panel, allow toggle ClientQrModal and QrCodeModal both used activeKey without onChange, forcing every panel open and blocking user toggle. Switch to controlled state initialized to the first item's key on open, with onChange so clicks update state. Also remove unused AppBridge.tsx (superseded by per-page message.useMessage hook). * fix(frontend): hover cards, balancer load, routing dnd, modal a11y, outbound crash - ClientsPage/SettingsPage/XrayPage: add hoverable to bottom card/tabs so hover affordance matches the top card - BalancerFormModal: lazy-init useState from props + destroyOnHidden so the form mounts with saved values instead of relying on a useEffect sync that could miss the first open - RoutingTab: rewrite pointer drag — handlers are now defined inside the pointerdown closure so addEventListener/removeEventListener match; drag state lives on a ref (from/to/moved) so onUp reads the real indices, not stale closure values. Adds setPointerCapture so Windows and touch keep delivering events when the cursor leaves the handle. - OutboundFormModal/InboundFormModal: blur the focused input before switching tabs to silence the aria-hidden-on-focused-element warning - utils.isArrEmpty: return true for undefined/null arrays — the old form treated undefined as "not empty" which crashed VLESSSettings.fromJson when json.vnext was missing * fix(frontend): clipboard reliability + restyle login page - ClipboardManager.copyText: prefer navigator.clipboard on secure contexts, fall back to a focused on-screen textarea + execCommand. Old path used left:-9999px which failed selection in some browsers and swallowed execCommand's return value, so the "copied" toast appeared even when nothing made it to the clipboard. - LoginPage: richer gradient backdrop — five animated colour blobs, glassmorphic card (backdrop-filter blur + saturate), gradient brand text/accent, masked grid texture for depth, and a thin gradient border on the card. Light/dark/ultra each get their own palette. * Memoize compactAdvancedJson and update deps Wrap compactAdvancedJson in useCallback (dependent on messageApi) and add it to the dependency array of applyAdvancedJsonToBasic. This ensures a stable function reference for correct dependency tracking and avoids stale closures/unnecessary re-renders in InboundFormModal.tsx. * style(frontend): prettier charts, drop redundant frame, format net rates - Sparkline: multi-stop gradient fill, soft drop-shadow under the line, dashed grid, glowing pulse on the latest-point marker, pill-shaped tooltip with dashed crosshair - XrayMetricsModal: glow + pulse on the observatory alive dot, monospace stamps/listen text - SystemHistoryModal: keep just the modal's frame around the chart (the inner wrapper I'd added stacked a second border on top); strip the decimal from Net Up/Down (25.63 KB/s → 25 KB/s) only on this chart's formatter * style(frontend): refined dark/ultra palette + shared pro card frame - Dark tokens shifted to a cooler, Linear-style palette: page #1a1b1f, sidebar/header #15161a (recessed nav, darker than cards), card #23252b, elevated #2d2f37 - Ultra dark: page pure #000 for OLED, sidebar #050507 disappears into the frame, card #101013 with a clear step, elevated #1a1a1e - New styles/page-cards.css holds the card border/shadow/hover rules so all seven content pages (index, clients, inbounds, xray, settings, nodes, api-docs) share one definition instead of duplicating in each page CSS - Dashboard typography: uppercase card titles with letter-spacing, larger 17px stat values, subtle gradient divider between stat columns, ellipsis on action labels so "Backup & Restore" doesn't break the card height at mid widths - Light --bg-page stays at #e6e8ec for the contrast against white cards * fix(frontend): wireguard info alignment, blue login dark, embed gitkeep - align WireGuard info-modal fields with Protocol/Address/Port by wrapping values in Tag (matches the rest of the dl.info-list rows) - swap login dark palette from purple to pure blue blobs/accent/brand - pin web/dist/.gitkeep through gitignore so //go:embed all:dist never fails on a fresh clone with an empty dist directory * docs: refresh frontend docs for the React + TS + AntD 6 stack Update CONTRIBUTING.md and frontend/README.md to describe the migrated frontend accurately: - replace Vue 3 / Ant Design Vue 4 references with React 19 / AntD 6 / TS - swap composables -> hooks, vue-i18n -> react-i18next, createApp -> createRoot - mention the typecheck step (tsc --noEmit) in the PR checklist - document the Vite 8.0.13 pin and TypeScript strict mode in conventions - list the nodes and api-docs entries that were missing from the layout * style(frontend): improve readability and mobile polish - bump statistic title/value contrast in dark and ultra-dark so totals on the inbounds summary card stay legible - give index card actions explicit colors per theme so links like Stop, Logs, System History no longer fade into the card background - show the panel version as a tag next to "3X-UI" on mobile, mirroring the Xray version tag pattern, and turn it orange when an update is available - make the login settings button a proper circle by adding size="large" + an explicit border-radius fallback on .toolbar-btn * feat: jalali calendar support and date formatting fixes - Wire useDatepicker into IntlUtil and switch jalalian display locale to fa-IR for clean "1405/07/03 12:00:00" output (drops the awkward "AP" era suffix that "<lang>-u-ca-persian" produced) - Drop in persian-calendar-suite for the jalali date picker, with a light/dark/ultra theme map and CSS overrides so the inline-styled input stays readable and bg matches the surrounding container - Force LTR on the picker input so "1405/03/07 00:00" reads naturally - Pass calendar setting through ClientInfoModal, ClientsPage Duration tooltip, and ClientFormModal's expiry picker - Heuristic toMs() in ClientInfoModal so GORM's autoUpdateTime seconds render as a real date instead of "1348/11/01" - Persist UpdatedAt on the ClientRecord row in client_service.Update; previously only the inbound settings JSON was bumped, so the panel never saw a fresh updated_at after editing a client * feat(frontend): donate link, panel version label, login lang menu - Sidebar: add heart donate link to https://donate.sanaei.dev and small panel version under 3X-UI brand - Login: swap settings-cog for translation icon, drop title, render languages as a direct list - Vite dev: inject window.X_UI_CUR_VER from config/version so dev mode matches prod - Translations: add menu.donate across all locales * fix(xray-update): respect XUI_BIN_FOLDER on Windows The Windows update path hardcoded "bin/xray-windows-amd64.exe", ignoring the configured XUI_BIN_FOLDER. In dev mode (folder set to x-ui) this created a stray bin/ folder while the running binary stayed un-updated. * Bump Xray to v26.5.9 and minor cleanup Update Xray release URLs to v26.5.9 in the GitHub Actions workflow and DockerInit.sh. Remove the hardcoded skip for tagVersion "26.5.3" so it will be considered when collecting Xray versions. Apply small formatting fixes: remove an extra blank line in database/db.go, normalize spacing/alignment of Protocol constants in database/model/model.go, and trim a trailing blank line in web/controller/inbound.go. * fix(frontend): route remaining copy buttons through ClipboardManager Direct navigator.clipboard calls fail in non-secure contexts (HTTP on a LAN IP), making the API-docs code copy and security-tab token copy silently broken. Both now go through ClipboardManager which falls back to document.execCommand('copy') when navigator.clipboard is unavailable. * fix(db): store CreatedAt/UpdatedAt in milliseconds GORM's autoCreateTime/autoUpdateTime tags default to Unix seconds on int64 fields and overwrite the service-supplied UnixMilli value on save. The frontend interprets these timestamps as JS Date inputs (milliseconds), so created/updated columns rendered ~1970 dates. Adding the :milli qualifier makes GORM match what the service code and UI expect. * Improve legacy clipboard copy handling Refactor ClipboardManager._legacyCopy to better handle focus and selection when copying. The textarea is now appended to the active element's parent (or body) and placed off-screen with aria-hidden and readonly attributes. The code preserves and restores the previous document selection and active element, uses focus({preventScroll: true}) to avoid scrolling, and returns the execCommand('copy') result. This makes legacy copy behavior more robust and less disruptive to the page state. * fix(lint): drop redundant ok=false in clipboard fallback catch * chore(deps): bump golang.org/x/net to v0.55.0 for GO-2026-5026
2026-05-23 06:21:45 -07:00
golang.zx2c4.com/wireguard v0.0.0-20260522210424-ecfc5a8d5446 // indirect
golang.zx2c4.com/wireguard/windows v1.1.1 // indirect
google.golang.org/genproto/googleapis/rpc v0.0.0-20260928230214-8a89bd6388cc // indirect
2025-05-11 04:05:45 -07:00
lukechampine.com/blake3 v1.4.1 // indirect
2023-02-09 11:18:06 -08:00
)